Sign In |Help & Support
ALL SECTORS
  • ALL SECTORS
  • GB(National Standard)
  • CB(Shipping)
  • CECS(Engineering Construction)
  • CJ(Urban Construction)
  • CY(News and Publication)
  • DB(Provincial Standard)
  • DL(Electricity & Power)
  • DZ(Geology & Mineralogy)
  • FZ(Spinning & Textile)
  • GA(Public Security)
  • HB(Aviation)
  • HG(Chemical Industry)
  • HJ(Environmental Protection)
  • JB(Machinery)
  • JC(Building Materials)
  • JG(Building & Construction)
  • JJ(Metering)
  • JT(Highway & Transportation)
  • LY(Forestry)
  • MT(Coal)
  • NB(Energy)
  • NY(Agriculture)
  • QB(Light Industry)
  • QC(Automobile & Vehicle)
  • QJ(Aerospace)
  • SH(Petrochemical)
  • SJ(Electronics)
  • SL(Water Resources)
  • SN(Commodity Inspection)
  • SY(Oil & Gas)
  • TB(Railway & Train)
  • YB(Ferrous Metallurgy)
  • YC(Tobacco)
  • YD(Telecommunication)
  • YY(Medical Device)
Database: 365,228(8 Aug 2026)

Insoluble matter treatment

Insoluble matter treatment, Total:466 items.

The international standard classification for "Insoluble matter treatment" includes: Fertilizers , Pesticides and other agrochemicals , Heat treatment and coating , Bolts, screws, studs , Pesticides and other agrochemicals in general , Lubricants, industrial oils and related products , Cereals, pulses and derived products , Coals , Pigments and extenders , Acids , food products in general , Surface active agents , Salts , Chemical reagents , Organic chemicals , Aromatic hydrocarbons , Solid wastes , Cosmetics. Toiletries .

The Chinese standard classification for "Insoluble matter treatment" includes: Basic standard and general method on forestry , Basic standards and general methods on chemical fertilizers , Ramie textile in general , Basic standards and general methods for pesticides , Tooth paste, soap and detergent , Hot processing technology , Fastener , Lubricating oil , Cereal crop and forage crop in general , Coal for vehicle, vessel and coal gas , Basic standards and general methods for dye , Inorganic acid and alkali , Food sanitation , Basic standards and general methods for chemical additive , Chemical reagent in general , Coal tar processed products , Heat treatment , Specifications for pollution control , Grease and oil processing and products , Health quarantine , Inorganic chemicals in general .


中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

  • GB/T 35812-2018 Method for analysis of forestry biomass—Determination of insoluble solids following pretreatment

Military Standard of the People's Republic of China-General Armament Department

  • GJB 772.408-1990 Test methods for explosives - Determination of insoluble matter - Solvent insoluble method

Professional Standard - Agriculture

  • 212药典 三部-2020 Physical Inspection Method 0903 Insoluble Particle Inspection Method
  • GB 3776.4-1983 Method of benzene-insoluble substances determination for pesticide emulsifiers
  • NY/T 256-1995 Sisal Textile - Determination of Dimensional Change After Different Water and Heat Treatment
  • NY/T 156-1995 Determination of dimensional change of sisal fabrics under different water and heat treatments
  • 193药典 三部-2015 Physical inspection method 0903 Insoluble particle inspection method general rule 40
  • NY/T 1973-2010 Water-soluble fertilizers-Determination of water insoluble matter content and pH
  • GB 7459-1987 Determination of content of ethanol-insoluble matter in soaps
  • NY/T 1115-2006 Water-soluble fertilizers-Determination of water insoluble matter content

Taiwan Provincial Standard of the People's Republic of China

  • CNS 10880.32-1997 Method of Test for Paint Components-Qnantitative Test of Aluminium in Solvent Insolubles
  • CNS 10880.19-1996 Method of Test for Paint Components-pH Valve for Extracted Solution of Solvent Insolubles
  • CNS 10880-24-1996 Method of Test for Paint Components-Quantitative Test of Lead Cyanide in Solvent Insolubles
  • CNS 10880.3-1994 Method of Test for Paint Components - Solvent Insoluble Matter
  • CNS 6200-1980 Determination of Water - Insoluble Matter of Sodium Fluoride for Indistrial Use
  • CNS 10880-20-1996 Method of Test for Paint Components-Quantitative Test of Total Lead in Solvent Insolubles
  • CNS 10880.23-1996 Method of Test for Paint Components-Quantitative Test of Calcium Plumbate in Solvent Insolubles
  • CNS 10880.25-1996 Method of Test for Paint Components-Quantitative Test of Metallic Zinc in Solvent Insolubles
  • CNS 10880.21-1996 Method of Test for Paint Components-Quantitative Test of Lead Lead Oxide in Solvent Insolubles
  • CNS 10880-4-1995 Method of Test for Paint Components - Alcohol Insoluble Matter
  • CNS 10880-19-1996 Method of Test for Paint Components-pH Valve for Extracted Solution of Solvent Insolubles
  • CNS 2770.10-1986 Method of Test for Feeds : Determination of Ash Insoluble in Hydrochloric Acid
  • CNS 10880.4-1995 Method of Test for Paint Components - Alcohol Insoluble Matter
  • CNS 2770-10-1986 Method of Test for Feeds : Determination of Ash Insoluble in Hydrochloric Acid
  • CNS 10880-26-1996 Method of Test for Paint Components-Quantitative Test of Total Zinc in Solvent Insolubles
  • CNS 10880-32-1997 Method of Test for Paint Components-Qnantitative Test of Aluminium in Solvent Insolubles
  • CNS 10880.18-1996 Method of Test for Paint Components-Water Soluble Matter in Solvent Insolubles
  • CNS 10880-23-1996 Method of Test for Paint Components-Quantitative Test of Calcium Plumbate in Solvent Insolubles
  • CNS 6196-1980 Method of Test for Water - Insoluble Matter of Paraformaldehyde for Industrial Use
  • CNS 10880.27-1996 Method of Test for Paint Components-Quantitative Test of Zinc Oxide in Solvent Insolubles
  • CNS 10880-21-1996 Method of Test for Paint Components-Quantitative Test of Lead Lead Oxide in Solvent Insolubles
  • CNS 10880-27-1996 Method of Test for Paint Components-Quantitative Test of Zinc Oxide in Solvent Insolubles
  • CNS 2488-1965 Determination of Benzene-Insoluble Substance in Asphalt and Coal Tar
  • CNS 10880-18-1996 Method of Test for Paint Components-Water Soluble Matter in Solvent Insolubles
  • CNS 10880.20-1996 Method of Test for Paint Components-Quantitative Test of Total Lead in Solvent Insolubles
  • CNS 914-1957 Method of Test for Benzene Insoluble Substances of Creosote Oil
  • CNS 10880.26-1996 Method of Test for Paint Components-Quantitative Test of Total Zinc in Solvent Insolubles
  • CNS 10880-25-1996 Method of Test for Paint Components-Quantitative Test of Metallic Zinc in Solvent Insolubles
  • CNS 10880-3-1994 Method of Test for Paint Components - Solvent Insoluble Matter
  • CNS 11289-1985 Instant Coffee-Determination of Insoluble Matter
  • CNS 10880.24-1996 Method of Test for Paint Components-Quantitative Test of Lead Cyanide in Solvent Insolubles

Group Standards of the People's Republic of China

  • T/SSEA 0070-2020 General requirements for MEC processing stainless steel wire rod
  • T/ZHXSJ 001-2022 Water treatment agent ferrous sulfate solution
  • T/CIECCPA 003-2022 Stainless steel honeycomb inclined tube for water and wastewater treatment
  • T/GDIN 005-2023 Ship oil pollutant receiving treatment—Pretreatment
  • T/YWEISA 001-2022 Technical code of practice for installation of prefabricated stainless steel water treatment structure
  • T/SASE 004-2022 Online solid solution heat treatment specification in welding production of austenitic stainless steel welded pipe
  • T/YNBX 083-2023 Ultrasonic solution processing reaction generator
  • T/QGCML 4595-2024 Treatment method of stainless steel slag for concrete
  • T/ZACA 015-2019 Specification for nonconforming certification service handling
  • T/CPPC 1023-2020 Technical regulations for biological treatment of diseased animals and unqualified meat products in inspection and quarantine

Professional Standard - Aerospace

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

  • GB/T 12680.2-1990 Test method for the insoluble substance in ethanol of alcohol soluble dyes
  • GB/T 9984.4-1988 Sodium tripolyphosphate for industrial use--Determination of insoluble matter in water
  • GB/T 6710-1986 Method of the determination for the water insoluble matter content of sodium ferrocyanide
  • GB/T 3776.4-1983 Method of benzene-insoluble substances determination for pesticide emulsifiers
  • GB/T 9984.4-2004 Sodium tripolyphosphate for industrial use-Determination of matter insoluble in water
  • GB/T 2381-1994 Determination of content of insoluble matters in dyestuffs
  • GB/T 5009.88-2003 Determination of insoluble dietary fiber in foods
  • GB/T 19138-2003 Testing method of in acetone material insoluble for pesticides
  • GB/T 9738-1988 Chemical reagent-General method for the determination of water insoluble matter
  • GB/T 9738-2008 Chemical Reagent - General Method for the Determination of Water Insoluble Matter
  • GB/T 8926-2012 Standard test method for insolubles in used lubricating oils
  • GB/T 2292-1997 Coking products - Determination of toluene insoluble content
  • GB/T 28136-2011 Testing method of material insoluble in water for pesticides
  • GB/T 10304.7-1988 Determination of nonsolute for chloricacid in cathode carbonate
  • GB/T 5267.4-2009 Passivation of corrosion-resistant stainless-steel fasteners
  • GB/T 2562-1981 Lignite wax--Determination of benzene insoluble substance
  • GB/T 9822-1988 Method for determination of insoluble dietary fiber in cereals
  • GB/T 2292-2018 Determination of toluene insoluble content for coking products
  • GB/T 12684.2-1990 Boric acid for industrial use-Determination of insoluble substance content in water
  • GB/T 8926-1988 Used lubricating oils--Determination of insolubles

农业农村部

  • NY/T 1973-2021 Determination of L-malic acid and D-malic acid in fruits and their derived products.High performance liquid chromatography

Liaoning Provincial Standard of the People's Republic of China

  • DB21/T 3082-2018 Determination of water-insoluble matter in magnesium-containing mineral raw materials

Professional Standard - Aviation

  • HB/Z 80-1984 Aviation stainless steel heat treatment
  • HB/Z 80-2011 Heat treatment of stainless steel for aviation
  • HB/Z 83-1984 Stainless steel pickling passivation treatment process

Professional Standard - Urban Construction

  • CJ/T 3061-1996 Dissolved medicament agitating equipment for water treatment

Professional Standard - Hygiene

  • WS/T 81-1996 Diagnostic criteria and principles of management for food poisoning of Vibrijo parahaemolyticus

Professional Standard - Machinery

  • JB/T 9197-1999 Heat treating for stainless steel and heat - resisting steel
  • JB/T 9197-2008 Heat treating for stainless steel and heat-resisting steel

Professional Standard - Energy

  • NB/SH/T 0861-2013 Determination of Pentane Insoluble Matter - Membrane Filter Method

Professional Standard - Chemical Industry

  • HG/T 4547-2013 Treatment and Disposal Methods for Discarded Soluble Barium Salt Reagents

国家市场监督管理总局、中国国家标准化管理委员会

  • GB/T 39191-2020 Heat treatment for stainless steel and heat resistant steel parts

Professional Standard - Light Industry

  • QB/T 3752-1999 Determination of Content of Ethanol-insoluble Matter in Soaps

Professional Standard - Commodity Inspection

  • SN/T 0802.1-1999 Phospholipid for import and export - Method for determination of insoluble residue in ethyl ether
  • SN/T 3379-2012 Treatment codes on nonconforming imported food
  • SN/T 1823-2006 Common drugs and methods of sanitary treatment for medical vectors
  • SN/T 0802.2-1999 Phospholipid for import and export - Method for determination of insoluble residue in acetone
  • SN/T 0542-2010 Determination of quinoline-insoluble(QI)content in exported coal tar
  • SN/T 0801.7-1999 Animal and vegetable oils and fats for import and export. Method for the determination of insoluble polybromides matter
  • SN/T 0542-1996 Test method for determination of quinoline-insoluble(QI)content in exported coal tar

Professional Standard - Petrochemical Industry

  • SH/T 0603-1994 Determination method for undissoloved substance content of refrigerant oil R12

Professional Standard - Ferrous Metallurgy

  • YB/T 5326-2006 Method of the determination for the water insoluble matter content of sodium ferrocyanide

Professional Standard - Meteorology

  • QX/T 214-2013 Pre-processing and Post-processing method of stainless steel canister for halogenated greenhouse gases sampling

未注明发布机构

Professional Standard - Non-ferrous Metal

  • YS/T 213-1994 Aluminium and aluminium alloy sheets of nonheat-treatable strengthening drades

Society of Automotive Engineers (SAE)

  • SAE AMS4304C-2022 Aluminum Alloy, Discontinuously Reinforced Sheet 2009/SiC/15w (T8P) Solution Heat Treated, Stretched, and Precipitation Heat Treated
  • SAE AMS4304-2000 Aluminum Alloy, Discontinuously Reinforced Sheet 2009/SiC/15w (T8P) Solution Heat Treated, Stretched, and Precipitation Heat Treated
  • SAE AMS4304B-2015 Aluminum Alloy, Discontinuously Reinforced Sheet 2009/SiC/15w (T8P) Solution Heat Treated, Stretched, and Precipitation Heat Treated
  • SAE AMS4251-1989 Aluminum Alloy, Sheet, 2.7Cu 2.2Li 0.12Zr, Solution Heat Treated, Cold Worked, and Precipitation Heat Treated
  • SAE AMS4422-1939 CAST MAGNESIUM ALLOY Solution Heat Treated
  • SAE AMS4534B-2003 Copper-Beryllium Alloy, Bars and Rods 98Cu - 1.9Be Solution Heat Treated, Cold Worked, and Precipitation Heat Treated (TH04, formerly HT) UNS C17200
  • SAE AMS4130L-2001 Aluminum Alloy Die Forgings 4.4Cu - 0.85Si - 0.80Mn (2025-T6) Solution and Precipitation Heat Treated UNS A 92025
  • SAE AMS4230D-1958 Aluminum Alloy, Castings, Sand, 4.5cu, Solution Treated
  • SAE AMS5355H-2001 Steel, Corrosion Resistant, Investment Castings 16Cr 4.1Ni 0.28Cb 3.2Cu Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated
  • SAE AMS4973F-2008 Titanium Alloy Forgings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized UNS R54810
  • SAE AMS5355J-2009 Steel, Corrosion Resistant, Investment Castings 16Cr 4.1Ni 0.28Cb 3.2Cu Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated
  • SAE AMS4101E-2012 Aluminum Alloy, Plate 4.4Cu 1.5Mg 0.60Mn (2124-T851) Solution Heat Treated, Stretched, and Precipitation Heat Treated
  • SAE AMS4078F-2000 Aluminum Alloy Plate (7075-T7351) Solution Heat Treated, Stress Relieved, and Overaged
  • SAE AMS4111D-2007 Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-T73) Solution and Precipitation Heat Treated UNS A97049
  • SAE AMS4725E-2012 Copper-Beryllium Alloy Wire 98Cu - 1.9Be Solution Heat Treated
  • SAE AMS4125K-2009 Aluminum Alloy Die Forgings, and Rolled or Forged Rings, 0.90Si - 0.62Mg - 0.25Cr, (6151-T6) Solution and Precipitation Heat Treated
  • SAE AMS4101A-1989 ALUMINUM ALLOY PLATE 4.4Cu - 1.5Mg - 0.60Mn (2124-T851) Solution Heat Treated, Stretched, and Precipitation Heat Treated
  • SAE AMS4725D-2000 Copper-Beryllium Alloy Wire 98Cu - 1.9Be Solution Heat Treated
  • SAE AMS4303B-2012 Aluminum Alloy Plate 2.7Cu - 2.2Li - 0.12Zr (2090-T81) Solution Heat Treated, Cold Worked, and Aged
  • SAE AMS4303A-2000 Aluminum Alloy Plate, 2.7Cu 2.2Li 0.12Zr (2090-T81) Solution Heat Treated, Cold Worked, and Aged
  • SAE AMS4434L-2005 Magnesium Alloy Castings, Sand 9.0Al - 2.0Zn (AZ92-T6) Solution and Precipitation Heat Treated
  • SAE AMS4303-1994 ALUMINUM ALLOY PLATE 2.7Cu - 2.2Li - 0.12Zr (2090-T81) Solution Heat Treated, Cold Worked, and Aged
  • SAE AMS4725D-1983 Wire, Copper-Beryllium Alloy 98Cu 1.9Be, Solution Heat Treated
  • SAE AMS5355J-2022 Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated
  • SAE AMS4437E-2003 Magnesium Alloy Castings, Sand 8.7Al - 0.70Zn (AZ91C-T6) Solution Heat Treated and Aged UNS M11914
  • SAE AMS5697-1954 STEEL WIRE, CORROSION RESISTANT 19Cr - 9Ni (SAE 30304) Solution Treated
  • SAE AMS4976F-2003 Titanium Alloy, Forgings 6.0Al 2.0Sn 4.0Zr 2.0Mo Solution and Precipitation Heat Treated
  • SAE AMS4251C-2022 Aluminum Alloy Sheet, 2.7Cu - 2.2Li - 0.12Zr (2090-T83), Solution Heat Treated, Cold Worked, and Precipitation Heat Treated
  • SAE AMS4230C-1995 ALUMINUM ALLOY CAS4TINGS, SAND 4.5Cu (195-T4) Solution Treated
  • SAE AMS5355E-1944 STEEL, CORROSION RESISTANT, INVESTMENT CASTINGS 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated
  • SAE AMS4156K-2003 Aluminum Alloy, Extrusions 0.68Mg 0.40Si (6063-T6) Solution and Precipitation Heat Treated
  • SAE AMS4934H-2019 Titanium Alloy, Extrusions and Flash Welded Rings 6Al - 4V Solution Heat Treated and Aged
  • SAE AMS4101C-2006 Aluminum Alloy, Plate 4.4Cu - 1.5Mg - 0.60Mn (2124-T851) Solution Heat Treated, Stretched, and Precipitation Heat Treated
  • SAE AMS4251-1994 ALUMINUM ALLOY SHEET 2.7Cu - 2.2Li - 0.12Zr (2090-T83) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated
  • SAE AMS4339-1994 Aluminum Alloy, Rolled or Cold Finished Bars and Rods 4.4Cu 1.5Mg 0.60Mn Solution Heat Treated, Cold Worked, and Artificially Aged
  • SAE AMS4088J-2000 Aluminum Alloy, Drawn, Seamless, Tubing 4.4Cu 1.5Mg O.60Mn (2024-T3) Solution Heat Treated and Cold Worked
  • SAE AMS4904-2003 Titanium Alloy Sheet, Strip, and Plate 6Al 4V Solution Heat Treated and Aged
  • SAE AMS4130M-2009 Aluminum Alloy Die Forgings, 4.4Cu - 0.85Si - 0.80Mn (2025-T6), Solution and Precipitation Heat Treated
  • SAE AMS5355H-2006 Steel, Corrosion Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated
  • SAE AMS4251A-2006 Aluminum Alloy Sheet 2.7Cu 2.2Li 0.12Zr (2090-T83) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated
  • SAE AMS4251A-2011 Aluminum Alloy Sheet 2.7Cu - 2.2Li - 0.12Zr (2090-T83) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated
  • SAE AMS4204C-2003 Aluminum Alloy, Plate 6.2Zn - 1.8Cu - 2.4Mg - 0.13Zr (7010-T7651) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated UNS A97010
  • SAE AMS4298-2004 Aluminum Alloy, Alclad Sheet 3.8Cu - 1.0Mg - 0.30Mn - 0.60Zn (Alclad 2056-T3) Solution Heat Treated and Cold Worked
  • SAE AMS4232B-2001 Aluminum Alloy Extrusion 2.7Cu 2.2Li 0.12Zr (2090-T86) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated
  • SAE AMS4933D-2008 Titanium Alloy Extrusions and Flash Welded Rings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized UNS R54810
  • SAE AMS5565M-2022 Steel, Corrosion-Resistant, Welded Tubing, 19Cr - 9.5Ni (304), Solution Heat Treated
  • SAE AMS4231F-1994 CASTINGS, SAND 4.5Cu - 1.1Si Solution & Precipitation Heat Treated
  • SAE AMS5221-1955 ALLOY STRIP Iron Base - 5.2Cr - 42Ni - 2.3Ti - 0.5Al Solution Treated
  • SAE AMS5221C-1984 ALLOY STRIP 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated
  • SAE AMS5221D-1994 ALLOY STRIP 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated
  • SAE AMS4213A-2011 Aluminum Alloy Plate (2027-T351) 4.4Cu - 1.2Mg - 0.8Mn - 0.10Zr Solution Heat Treated, Cold Worked and Naturally Aged

Association Francaise de Normalisation

  • NF ISO 1576:1989 Thé - Détermination des cendres solubles et des cendres insolubles dans l'eau
  • NF V05-222:1986 Instant coffee. Determination of insoluble matter content.
  • NF U42-107:2020 Fertilizers - Determination of water-insoluble matter
  • NF ISO 1577:1989 Thé - Détermination des cendres insolubles dans l'acide
  • NF EN ISO 54321:2021 Sols, biodéchets traités, boues et déchets - Digestion des éléments solubles dans l'eau régale
  • NF EN 16173:2012 Boues, biodéchets traités et sols - Digestion des éléments solubles dans l'acide nitrique
  • NF X31-045*NF EN 16173:2012 Sludge, treated biowaste and soil - Digestion of nitric acid soluble fractions of elements.
  • NF X31-043:2012 Sludge, treated biowaste and soil - Digestion of aqua regia soluble fractions of elements.
  • NF V18-111:2022 Animal feed - Determination of the content of water-insoluble plant walls
  • NF ISO 28198:2019 Corps gras d'origine végétale - Détermination des matières insolubles dans le toluène
  • NF T20-402:1982 Sodium chloride for industrial use. Determination of matter insoluble in water or in acid and preparation of principal solutions for other determination.
  • NF X31-413:2021 Soil, treated biowaste, sludge and waste - Digestion of aqua regia soluble fractions of elements
  • NF T94-208*NF EN 12122:2005 Chemicals used for treatment of water intended for human consumption - Ammonia solution
  • NF T60-666:2009 Vegetable fats and oils - Determination of toluene insoluble matter.
  • NF T20-353:1978 Potassium chloride for industrial use. Determination of water insoluble matter.
  • NF V18-102*NF ISO 5985:2013 Animal feeding stuffs - Determination of ash insoluble in hydrochloric acid
  • NF T60-303:1976 Soaps. Determination of ethanol-insoluble matter.
  • NF M07-063:1986 Produits pétroliers - Teneur en insolubles des combustibles liquides
  • NF V18-111:1998 Animal feeding stuffs. Determination of water-insoluble vegetable cell walls content

VDI - Verein Deutscher Ingenieure

SCC

  • VDI 4505 BLATT 1-1997 Order processing — methodical processing of orders in the capital goods business
  • AS 2508.8.018:1995 Safe storage and handling information card - Formaldehyde solutions (with not less than 25 percent formaldehyde)
  • AS 2508.3.009:1982 Safe storage and handling information card - Hydrocarbon solvents
  • AS 2508.2.001:1981 Safe storage and handling information cards for hazardous materials - Acetylene (dissolved)
  • AWWA ACE54255 Integrating Coagulation Pretreatment With Membrane Filtration: Mechanisms for Fouling by Dissolved Organic Matter
  • BS 2B 33:2001 Copper-beryllium alloy wire and springs (solution treated and precipitation treated)
  • AS 1627.1:1989 Metal finishing - Preparation and pretreatment of surfaces - Cleaning using liquid solvents and alkaline solutions
  • BS 5707-3:1980 Solutions of wood preservatives in organic solvents-Methods of treatment
  • AS 2508.5.005:1992 Safe storage and handling information card - Methyl ethyl ketone peroxide (MEKP) (not more than 50% in solution with not more than 10% available oxygen)
  • AWWA ACE99397 Integration of High Rate Dissolved Air Flotation Treatment Technology into Water Treatment Plant Design
  • 09/30181211 DC BS 3B 33. Specification for copper-beryllium alloy wire (solution treated and precipitation treated)
  • DANSK DS/ISO 54321:2021 Soil, treated biowaste, sludge and waste – Digestion of aqua regia soluble fractions of elements
  • NS-EN 16174:2012 Sludge, treated biowaste and soil - Digestion of aqua regia soluble fractions of elements
  • ASD-STAN prEN 2199:1970 Heat resisting nickel base alloy Ni-P105-HT - Solution treated and precipitation treated - Bars
  • BS 2B 28:2001 Copper-beryllium alloy strip, foil and parts (solution treated and precipitation treated)
  • DANSK DS/EN 16174:2012 Sludge, treated biowaste and soil – Digestion of aqua regia soluble fractions of elements
  • ASD-STAN prEN 2202:1970 Heat resisting nickel base alloy NI-C105-HT- Solution treated and precipitation treated - Tube
  • ASD-STAN prEN 2174:1970 Heat resisting nickel base alloy FE-PA93-HT - Solution treated and precipitation treated - Forgings
  • ASD-STAN prEN 2405:1970 Heat resisting nickel base alloy NI-P100-HT - Solution treated and precipitation treated - Forgings
  • DIN 55977 E:2020 Draft Document - Dyestuffs - Determination of non-readily soluble matter in solvents
  • AWWA MTC61235 Evaluation of Membranes and Dissolved Air Flotation to Treat High Organic and High Turbidity Water
  • ASD-STAN prEN 3366:1970 Steel FE-CM68 - as manufactured - reference heat treatment : solution treated - Remelting stock
  • DANSK DS/EN 16173:2012 Sludge, treated biowaste and soil - Digestion of nitric acid soluble fractions of elements
  • VDI 3475 BLATT 5-2015 Emission reduction — Biological waste treatment plants — Fermentation and post-treatment
  • AS 2508.8.013:1985 Safe storage and handling information cards for hazardous materials - Hydrofluoric acid (aqueous)
  • NS-EN 16173:2012 Sludge, treated biowaste and soil — Digestion of nitric acid soluble fractions of elements
  • BS B 33:1991 Specification for copper-beryllium alloy wire and springs (solution treated (W) and precipitated)
  • AWWA ACE54248 Impact of Different Treatment Processes on Dissolved Copper in New and Aged Pipes: Nebraska Case Study
  • DIN EN 16174 E:2011 Draft Document - Sludge, treated biowaste and soil - Digestion of aqua regia soluble fractions of elements; German version prEN 16174:2010
  • DANSK DS/ISO 5985:2003 Animal feeding stuffs - Determination of ash insoluble in hydrochloric acid
  • AENOR UNE 55024:1970 Oils and fats. Determination of foreign substances insoluble in soap alcohol.
  • AWWA WQTC62447 Monitoring of Natural Organic Matter Characteristics in Project Water Treated by Varied Combination of Process Train
  • BS ISO 5985:2002 Animal feeding stuffs. Determination of ash insoluble in hydrochloric acid
  • ASD-STAN prEN 2204:1970 Heat resisting nickel base alloy NI-C105-HT- solution treated and precipitation treated - Precision castings
  • ASD-STAN prEN 3530:1970 Steel FE-PA95 - softened - Reference heat treatment : solution treated and precipitation treated - Forging stock - De <or= 200 mm
  • AWWA ACE92030 Water Quality and Treatment: What's Different in British Columbia?
  • NS-EN ISO 54321:2021 Soil, treated biowaste, sludge and waste — Digestion of aqua regia soluble fractions of elements (ISO 54321:2020)
  • AWWA WQTC64153 An Evaluation of Water Treatment Residuals for Treatment of Arsenic
  • AS O60:1956 Specification for wood treated with lycticides
  • BS EN ISO 663:1995 Animal and vegetable fats and oils. Determination of insoluble impurities content
  • BS EN ISO 663:2001 Animal and vegetable fats and oils. Determination of insoluble impurities content
  • 09/30181201 DC BS 3B 28. Specification for copper-beryllium alloy strip and foil (solution treated and precipitation treated)
  • 09/30181209 DC BS 3B 32. Specification for copper-beryllium alloy rods and sections (solution treated and precipitation treated)
  • DIN EN 16173 E:2011 Draft Document - Sludge, treated biowaste and soil - Digestion of nitric acid soluble fractions of elements; German version prEN 16173:2010
  • BS B 32:1991 Specification for copper-beryllium alloy rods, sections and parts (solution treated (W) and precipitated)
  • AWWA ACE61719 Rapid Characterization of the Changes in Dissolved Organic Matter Polarity and Size During Water Treatment
  • BS B 28:1991 Specification for copper-beryllium alloy strip, foil and parts (solution treated (W) and precipitated)
  • AENOR UNE 7119:1958 DETERMINATION OF THE MATTER INSOLUBLE IN BENZENE, CONTAINED IN CREOSOTES
  • AWWA WQTC57179 Treatment Study of MTBE and Alternative Oxygenates in Varied Groundwaters Using Pilot-Scale Processes
  • AWWA MTC53864 An Overview of Biological Pretreatment for Industrial Water Treatment Systems
  • ASD-STAN PREN 2669:2010 Aerospace series Heat resisting nickel base alloy Ni-P96 Melted under vacuum Not heat treated Reference heat treatment : solution treated and precipitation treated Forging stock
  • ASME BPE-2024 Bioprocessing Equipment
  • 10/30147481 DC BS EN 16173. Sludge, treated biowaste and soil. Digestion of nitric acid soluble fractions of elements
  • ASD-STAN PREN 2299:2010 Aerospace series Heat resisting nickel base alloy Ni-P96HT Solution treated and precipitation treated Tube
  • 08/30189644 DC BS ISO 28198. Animal and vegetable fats and oils. Determination of toluene insoluble matter
  • AWWA JAW37684 Journal AWWA — Soluble Arsenic Removal at Water Treatment Plants
  • CSA Z341.4-14:2014 Salt cavern waste disposal
  • CSA Z317.10-15:2016 Handling of healthcare waste
  • AWWA WQTC60611 Comparison of an Anionic Polymer to No Polymer Addition for Treating Filter Backwash Water

GSO

  • GSO ISO 7534:1997 INSTANT COFFEE – DETERMINATION OF INSOLUBLE MATTER CONTENT
  • OS GSO ISO 7534:1997 INSTANT COFFEE – DETERMINATION OF INSOLUBLE MATTER CONTENT
  • GSO 2206:2012 Prepared meats - meat treated with salt solution and heat treated
  • GSO ISO 28198:2022 Vegetable fats and oils — Determination of toluene insoluble matter
  • BH GSO ISO 28198:2023 Vegetable fats and oils — Determination of toluene insoluble matter
  • OS GSO ISO 1578:2002 Methods of examination and teat for tea-determination of water insoluble and insoluble ash.
  • GSO 2204:2024 Prepared Meats – Pressed Meat Treated with Salt Solution and Heat Treated
  • GSO ISO 18609:2014 Animal and vegetable fats and oils -- Determination of unsaponifiable matter -- Method using hexane extraction
  • BH GSO ISO 2831:2017 Sodium fluoride for industrial use -- Determination of water-insoluble matter
  • OS GSO ISO 2479:2008 Sodium chloride for industrial use - Determination of matter insoluble in water or in acid and preparation of principal solutions for other determinations
  • GSO ASTM D4055:2014 Standard Test Method for Pentane Insolubles by Membrane Filtration
  • OS GSO ISO 673:2007 Soaps – Determination of Content of ethanol – insoluble matte
  • GSO ISO 2831:2015 Sodium fluoride for industrial use -- Determination of water-insoluble matter
  • OS 94:1985 CHEMICAL TESTS FOR LIME DETERMINATION OF INSOLUBLE MATTER AND COMBINED OXIDES
  • OS GSO ISO 6655:2015 Animal feeding stuffs -- Determination of soluble nitrogen content after treatment with pepsin in dilute hydrochloric acid

BR-ABNT

US-FCR

ZA-SANS

BE-NBN

  • NBN 771-05-1969 Determination of insoluble matter residue
  • NBN T 03-238-1980 Sodium and potassium silicates for industrial use - Preparation of solution of products not easily sOluble in boiling water and determination of matter insoluble in water
  • NBN T 63-105-1982 Soaps - Determination of content of ethanol-insoluble matter
  • NBN T 04-034-1983 Paraformaldehyde for industriel use - Détermination of water-insoluble matter

Korean Agency for Technology and Standards (KATS)

  • KS B 0954-2007 Methods of post weld heat treatment
  • KS M ISO 6791-2017(2022) Determination of quinoline-insoluble(QI) material of pitch
  • KS M 2415-2006 Standard test method for n-heptane insolubles
  • KS I ISO 54321-2023 Soil, treated biowaste, sludge and waste — Digestion of aqua regia soluble fractions of elements
  • KS M ISO 6791-2022 Determination of quinoline-insoluble(QI) material of pitch
  • KS M ISO 673:2003 Soaps-Determination of content of ethanol-insoluble matter
  • KS M ISO 673-2023 Soaps-Determination of content of ethanol-insoluble matter
  • KS M ISO 673-2003(2018) Soaps-Determination of content of ethanol-insoluble matter
  • KS H ISO 663:2012 Animal and vegetable fats and oils-Determination of insoluble impurities content
  • KS M 2415-2006(2021) Standard test method for n-heptane insolubles
  • KS M 2415-2006(2016) Standard test method for n-heptane insolubles
  • KS M ISO 2831-2017(2022) Sodium fluoride for industrial use — Determination of water-insoluble matter
  • KS M 2415-2023 Standard test method for n-heptane insolubles
  • KS M ISO 2831-2022 Sodium fluoride for industrial use — Determination of water-insoluble matter
  • KS M ISO 2479-2022 Sodium chloride for industrial use — Determination of matter insoluble in water or in acid and preparation of principal solutions for other determinations
  • KS M 2221-2007(2017) Testing method for insolubles in used lubricating oils
  • KS W 2025-1979 DEFINITIONS AND OPERATIONS OF DISSIMILAR METALS IN AIRCRAFT
  • KS M 2221-1982 Testing method for insolubles in used lubricating oils
  • KS W 2025-2003(2008) DEFINITIONS AND OPERATIONS OF DISSIMILAR METALS IN AIRCRAFT
  • KS M 2221-2007 Testing method for insolubles in used lubricating oils
  • KS M ISO 2122-2017(2022) Sodium and potassium silicates for industrial use — Preparation of solution of products not easily soluble in boiling water and determination of matter insoluble in water
  • KS M ISO 2122:2012 Sodium and potassium silicates for industrial use-Preparation of Sodium and potassium silicates for industrial use-Preparation of determination of matter insoluble in water
  • KS M ISO 2122:2017 Sodium and potassium silicates for industrial use — Preparation of solution of products not easily soluble in boiling water and determination of matter insoluble in water

American Society for Testing and Materials (ASTM)

  • ASTM UOP815-87 Acid Insolubles in Catalysts
  • ASTM D3279-12 Standard Test Method for n -Heptane Insolubles
  • ASTM D3279-07 Standard Test Method for n-Heptane Insolubles
  • ASTM E1721-95 Standard Test Method for Determination of Acid-Insoluble Residue in Biomass
  • ASTM F1744-96(2008)e1 Standard Guide for Care and Handling of Stainless Steel Surgical Instruments
  • ASTM F1744-96(2016) Standard Guide for Care and Handling of Stainless Steel Surgical Instruments
  • ASTM F1744-96(2008) Standard Guide for Care and Handling of Stainless Steel Surgical Instruments
  • ASTM F1744-96 Standard Guide for Care and Handling of Stainless Steel Surgical Instruments

RU-GOST R

  • GOST 27749.3-1988 Carbamid. Method of substance insoluble in water content determination
  • GOST 21138.6-1978 Chalk. Method for determination of insoluble in hydrochloric acid residue mass fraction
  • GOST 16412.8-1991 Iron powder. Method for the determination of insoluble residue
  • GOST 32264-2013 Tar and pitch. Determination of toluene-insoluble content
  • GOST R 55088-2012 Resources saving. Waste treatment. Comprehensive waste treatment principles
  • GOST 24024.2-1980 Phosphorus and inorganic phosphorus compounds. Method of determination of matters non-soluble in water
  • GOST 28357-1989 Coke-chemical products. Rapid method for determination of mass fraction of substances insoluble in toluene

British Standards Institution (BSI)

  • BS EN 12122:2005(2006) Chemicals used for treatment of water intended for human consumption — Ammonia solution
  • BS EN 12122:2005 Chemicals used for treatment of water intended for human consumption — Ammonia solution
  • BS ISO 28198:2018 Vegetable fats and oils. Determination of toluene insoluble matter
  • BS ISO 28198:2009 Vegetable fats and oils - Determination of toluene insoluble matter
  • BS 2B 29:2001 Copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: quarter hard and precipitation treated)
  • BS 2L 98:1971 Specification for plate of aluminium-copper-magnesium-manganese alloy (solution treated and aged at room temperature: not controlled stretched) (Cu 4.4, Mg 1.5, Mn 0.6)
  • BS 3B 28:2009 Specification for copper-beryllium alloy strip and foil (solution treated and precipitation treated)
  • BS 2B 32:2001 Copper-beryllium alloy rods, sections and parts (solution treated and precipitation treated)
  • BS 7319-3:1990 Analysis of sodium chloride for industrial use. Method for determination of matter insoluble in water or in acid
  • BS EN 16173:2012 Sludge, treated biowaste and soil. Digestion of nitric acid soluble fractions of elements
  • BS 684 Sec.1.9:1976 Methods of analysis of fats and fatty oils. Physical methods. Determination of water-insoluble solvents
  • BS EN 16174:2012 Sludge, treated biowaste and soil. Digestion of aqua regia soluble fractions of elements
  • BS ISO 5985:2002+A1:2015 Animal feeding stuffs. Determination of ash insoluble in hydrochloric acid.
  • BS 684-1.9:1976(2009) Methods of analysis of Fats and fatty oils — Part 1 : Physical methods — Section 1.9 : Determination of water - insoluble solvents
  • BS ISO 5985:2003 Animal feeding stuffs - Determination of ash insoluble in hydrochloric acid
  • BS EN ISO 54321:2021 Soil, treated biowaste, sludge and waste. Digestion of aqua regia soluble fractions of elements
  • BS 2L 99:1972 Specification for ingots and castings of aluminium-silicon-magnesium alloy (solution treated and precipitation treated) (Si 7, Mg 0.3)
  • 19/30402106 DC BS EN ISO 54321. Soil, treated biowaste, sludge and waste. Digestion of aqua regia soluble fractions of elements
  • BS 3L 78:1970 Specification for ingots and castings of aluminium-silicon-copper-magnesium alloy (solution treated and precipitation treated) (Si 5, Cu 1.2, Mg 0.5)
  • BS 2B 31:2001 Copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: full hard and precipitation treated)
  • BS 2L 99:1972(2009) Specification for Ingots and castings of aluminium - silicon - magnesium alloy — (Solution treated and precipitation treated) (Si 7, Mg 0.3)
  • BS 2B 30:2001 Copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: half hard and precipitation treated)
  • BS EN 12913:2005 Products used for treatment of water intended for human consumption - Powdered diatomaceous earth

German Institute for Standardization

  • DIN 55977:2020 Dyestuffs - Determination of non-readily soluble matter in solvents
  • DIN 55977:2020-11 Dyestuffs - Determination of non-readily soluble matter in solvents
  • DIN EN ISO 54321:2021-04 Soil, treated biowaste, sludge and waste - Digestion of aqua regia soluble fractions of elements (ISO 54321:2020); German version EN ISO 54321:2021
  • DIN EN 16173:2012-11 Sludge, treated biowaste and soil - Digestion of nitric acid soluble fractions of elements; German version EN 16173:2012
  • DIN 10743:2013-05 Analysis of honey - Determination of water-insoluble solids

International Organization for Standardization (ISO)

  • ISO 7534:1985 Instant coffee; Determination of insoluble matter content
  • ISO 28198:2009 Vegetable fats and oils - Determination of toluene insoluble matter
  • ISO 28198:2018 Vegetable fats and oils - Determination of toluene insoluble matter
  • ISO 673:1981 Soaps; Determination of content of ethanol-insoluble matter
  • ISO 3235:1975 Sodium sulphate for industrial use; Determination of acid-insoluble matter
  • ISO 1598:1990 Plastics; cellulose acetate; determination of insoluble particles
  • ISO 10981:1993 Determination of uranium in reprocessing plant dissolver solution; liquid chromatography method
  • ISO 5985:1978 Animal feeding stuffs; Determination of ash insoluble in hydrochloric acid
  • ISO 5985:2002 Animal feeding stuffs - Determination of ash insoluble in hydrochloric acid

European Association of Aerospace Industries

  • AECMA PREN 3310-1988 Titanium Alloy TI-P63 Not Heat Treated Reference Heat Treatment: Annealed Grade 2 Forging Stock De Less Than or Equal to 360 mm
  • AECMA PREN 3313-1988 Titanium Alloy TI-P63 Not Heat Treated Reference Heat Treatment: Solution Treated and Aged Grade 2 Forging Stock De Less Than or Equal to360 mm
  • AECMA PREN 3310-1995 Aerospace Series Titanium Alloy TI-P64001 not Heat Treated Grade 2 Forging Stock, for Annealed Forgings a or D Less Than or Equal to 360 mm Edition P 2
  • AECMA PREN 3313-1995 Aerospace Series Titanium Alloy TI-P64001 not Heat Treated Grade 2 Forging Stock, for Solution Treated and Aged Forgings a or D Less Than or Equal to 360 mm Edition P 2
  • AECMA PREN 3457-2002 Aerospace Series Titanium Alloy TI-P63 Not Heat Treated Reference Heat Treatment: Solution Treated and Aged Grade 2 Forging Stock for Fasteners D Less Than or Equal to 25 mm Issue P 2 [Refer To: ASD-STAN PREN 3813]
  • AECMA PREN 3466-1988 Titanium Alloy TI-P68 Solution Treated and Aged Rm Greater Than or Equal to 1000 MPa Bar for Machining De Less Than or Equal to 150 mm
  • AECMA PREN 3465-1988 Titanium Alloy TI-P68 Not Heat Treated Reference Heat Treatment: Solution Treated and Aged Grade 2 Forging Stock De Less Than or Equal to 360 mm

Lithuanian Standards Office

  • LST EN 12050-2-2015 Wastewater lifting plants for buildings and sites - Part 2: Lifting plants for faecal-free wastewater
  • LST EN 16174-2012 Sludge, treated biowaste and soil - Digestion of aqua regia soluble fractions of elements
  • LST EN 16173-2012 Sludge, treated biowaste and soil - Digestion of nitric acid soluble fractions of elements
  • LST EN 12050-4-2015 Wastewater lifting plants for buildings and sites - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter
  • LST EN 3677-2007 Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D ? 200 mm - Rm ? 1 310 MPa
  • LST EN 3160-2007 Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, bar a or D ? 200 mm, Rm ? 1 310 MPa
  • LST EN 3161-2007 Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, bar a or D ? 200 mm, Rm ? 930 MPa
  • LST EN 3678-2007 Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D ? 200 mm - Rm ? 930 MPa
  • LST EN ISO 54321:2021 Soil, treated biowaste, sludge and waste - Digestion of aqua regia soluble fractions of elements (ISO 54321:2020)

SAE - SAE International

  • SAE AMS4725-1947 COPPER - BERYLLIUM ALLOY WIRE Solution Treated
  • SAE AMS4422A-1941 CAST MAGNESIUM ALLOY Solution Heat Treated
  • SAE AMS4650D-1951 COPPER-BERYLLIUM ALLOY 98Cu - 1.9Be Solution Treated
  • SAE AMS4422F-1949 MAGNESIUM ALLOY CASTINGS@ SAND AZ63 Solution Treated
  • SAE ARP4992-1996 Periodic Test Plan for Processing Solutions
  • SAE AMS4725C-1967 COPPER-BERYLLIUM ALLOY WIRE 98Cu - 1.9Be Solution Treated
  • SAE AMS4725B-1964 COPPER-BERYLLIUM ALLOY WIRE 98Cu - 1.9Be Solution Treated
  • SAE AMS4422G-1951 MAGNESIUM ALLOY CASTINGS@ SAND AZ63 Solution Treated
  • SAE AMS4422E-1949 MAGNESIUM ALLOY CASTINGS@ SAND AZ63 Solution Treated
  • SAE AMS4725A-1951 COPPER-BERYLLIUM ALLOY WIRE 98Cu - 1.9Be Solution Treated
  • SAE AMS4424-1939 CAST MAGNESIUM ALLOY Solution Precipitation Heat Treated
  • SAE AMS4424A-1941 CAST MAGNESIUM ALLOY Solution Precipitation Heat Treated
  • SAE AMS4912-1961 TITANIUM ALLOY SHEET 4A1 - 3Mo - IV Solution Heat Treated
  • SAE AMS4222E-1967 ALUMINUM ALLOY CASTINGS@ SAND 4.0Cu - 2.0Ni - 1.5Mg (142-T77) Solution Treated and Overaged
  • SAE AMS4303-1990 Aluminum Alloy Plate 2.7Cu - 2.2Li - 0.12Zr (2090-T81) Solution Heat Treated@ Cold Worked@ and Aged
  • SAE AMS4434-1941 CAST MAGNESIUM ALLOY Solution Precipitation Heat Treated
  • SAE AMS4303C-2017 Aluminum Alloy Plate 2.7Cu - 2.2Li - 0.12Zr (2090-T81) Solution Heat Treated@ Cold Worked@ and Aged
  • SAE AMS4650C-1947 COPPER - BERYLLIUM ALLOY BARS AND FORGINGS Solution Treated
  • SAE AMS4231F-1989 Castings@ Sand 4.5Cu - 1.1Si Solution and Precipitation Heat Treated
  • SAE AMS4434E-1952 MAGNESIUM ALLOY CASTINGS@ SAND AZ92 Solution and Precipitation Treated
  • SAE AMS4240C-1959 Aluminum Alloy Castings@ Sand 10Mg (220-T4) Solution Treated
  • SAE AMS4230B-1952 ALUMINUM ALLOY CASTINGS@ SAND 4.5CU (195-T4) Solution Treated
  • SAE AMS4230A-1951 ALUMINUM ALLOY CASTINGS@ SAND 4.5Cu (195-T4) Solution Treated
  • SAE AMS4346A-1992 ALUMINUM ALLOY PLATE 2.7CU - 2.2LI - 0.12ZR - SOLUTION HEAT TREATED@ COLD WORKED@ AND PRECIPITATION HEAT TREATED (UNS A92090)
  • SAE AMS4434D-1951 MAGNESIUM ALLOY CASTINGS@ SAND AZ92 Solution and Precipitation Treated
  • SAE AMS7228J-1993 RIVETS@ CORROSION RESISTANT STEEL 18Cr - 9Ni SOLUTION HEAT TREATED
  • SAE AMS4530A-1947 COPPER - BERYLLIUM ALLOY SHEET AND STRIP Solution Treated
  • SAE AMS4240B-1951 Aluminum Alloy Castings@ Sand 10Mg (220-T4) Solution Treated
  • SAE AMS4530F-1992 Sheet@ Strip@ and Plate@ Copper-Beryllium Alloy 98Cu - 1.9Be (CDA 172) Solution Heat Treated
  • SAE AMS4231G-2005 Castings@ Sand 4.5Cu - 1.1Si Solution and Precipitation Heat Treated
  • SAE AMS4424E-1951 MAGNESIUM ALLOY CASTINGS@ SAND AZ63 Solution and Precipitation Treated
  • SAE AMS4101F-2018 Aluminum Alloy@ Plate 4.4Cu - 1.5Mg - 0.60Mn (2124-T851) Solution Heat Treated@ Stretched@ and Precipitation Heat Treated (UNS A92124)
  • SAE AMS4101D-2009 Aluminum Alloy@ Plate 4.4Cu - 1.5Mg - 0.60Mn (2124-T851) Solution Heat Treated@ Stretched@ and Precipitation Heat Treated (UNS A92124)
  • SAE AMS4904C-2015 Titanium Alloy Sheet@ Strip@ and Plate 6Al - 4V Solution Heat Treated and Aged (UNS R56400)
  • SAE AMS4904D-2018 Titanium Alloy Sheet@ Strip@ and Plate 6Al - 4V Solution Heat Treated and Aged (UNS R56400)
  • SAE AMS4934-1975 TITANIUM ALLOY EXTRUSIONS AND FLASH WELDED RINGS 6Al - 4V Solution Heat Treated and Aged
  • SAE AMS4913-1961 TITANIUM ALLOY SHEET 4A1 - 3Mo - 1V Solution and Precipitation Treated
  • SAE AMS4725F-2018 Copper-Beryllium Alloy Wire 98Cu - 1.9Be Solution Heat Treated (UNS C17200)
  • SAE AMS4650B-1946 BERYLLIUM COPPER ALLOY BARS AND FORGINGS Solution Treated
  • SAE AMS4101B-1995 Aluminum Alloy@ Plate 4.4Cu - 1.5Mg - 0.60Mn (2124-T851) Solution Heat Treated@ Stretched@ and Precipitation Heat Treated (UNS A92124)
  • SAE AMS4934A-1977 TITANIUM ALLOY EXTRUSIONS AND FLASH WELDED RINGS 6Al - 4V Solution Heat Treated and Aged

PL-PKN

IN-BIS

HU-MSZT

  • MSZ 19900-1982 Detection of insoluble matter in oil-extracted seeds
  • MSZ 6943/2-1980 Check the physical and chemical properties of honey based on the content of insoluble matter and dust in the water

ES-UNE

  • UNE-EN ISO 54321:2021 Soil, treated biowaste, sludge and waste - Digestion of aqua regia soluble fractions of elements (ISO 54321:2020) (Endorsed by Asociación Española de Normalización in March of 2021.)
  • UNE-EN 16173:2012 Sludge, treated biowaste and soil - Digestion of nitric acid soluble fractions of elements (Endorsed by AENOR in October of 2012.)

CZ-CSN

  • CSN 70 3003-1981 Finish for difforont closure
  • CSN 65 2462-1981 Sodium Chloride [Salt) Method for Determination of Insoluble Substances In Water.
  • CSN 65 1063-1988 Inorganic compounds of phosphorus. etermination of matter insoluble in ater.
  • CSN 56 0160-16-1995 Methods for testing of sugar products. Determination of insoluble matter.
  • CSN 50 0256-1970 Determination of part of pulp ashcs íion-soluble iii hydrochloric acid

IT-UNI

  • UNI 4384-1959 Roof waterproofing treatment. Determination of insoluble substances in hydrochloric acid among minerals contained in asphalt putty and synthetic asphalt putty
  • UNI EN ISO 54321:2021 Soil, treated biowaste, sludge and waste - Digestion of aqua regia soluble fractions of elements

European Committee for Standardization (CEN)

  • EN 16174:2012 Sludge, treated biowaste and soil - Digestion of aqua regia soluble fractions of elements
  • prEN 2173-1981 Heat resisting steel FE-PA93-HT, solution treated and precipitation treated; bars; aerospace series
  • EN ISO 54321:2021 Soil, treated biowaste, sludge and waste - Digestion of aqua regia soluble fractions of elements (ISO 54321:2020)
  • CEN EN 1568-2-2008_ Fire extinguishing media - Foam concentrates - Part 2: Specification for high expansion foam concentrates for surface application to water-immiscible liquids
  • CEN EN 1568-4-2008_ Fire extinguishing media - Foam concentrates - Part 4: Specification for low expansion foam concentrates for surface application to water-miscible liquids
  • prEN 2238-1979 Aerospace series; heat resisting steel FE-PA 91-HT, solution treated and precipitation treated; bars
  • CEN EN 1568-3-2008_ Fire extinguishing media - Foam concentrates - Part 3: Specification for low expansion foam concentrates for surface application to water-immiscible liquids

American National Standards Institute (ANSI)

RO-ASRO

Standard Association of Australia (SAA)

  • AS ISO 54321:2023 Soil, treated biowaste, sludge and waste — Digestion of aqua regia soluble fractions of elements

SA-SASO

SSPC - The Society for Protective Coatings

KR-KS

  • KS M ISO 673-2003(2023) Soaps-Determination of content of ethanol-insoluble matter
  • KS M ISO 2122-2017 Sodium and potassium silicates for industrial use — Preparation of solution of products not easily soluble in boiling water and determination of matter insoluble in water
  • KS M ISO 2461-2010 Sodium chlorate for industrial use-Determination of matter insoluble in water
  • KS M ISO 2831-2017 Sodium fluoride for industrial use — Determination of water-insoluble matter

Danish Standards Foundation

  • DS/EN ISO 54321:2021 Soil, treated biowaste, sludge and waste – Digestion of aqua regia soluble fractions of elements (ISO 54321:2020)
  • DS/ISO 54321:2021 Soil, treated biowaste, sludge and waste – Digestion of aqua regia soluble fractions of elements
  • DS/EN 16173:2012 Sludge, treated biowaste and soil - Digestion of nitric acid soluble fractions of elements
  • DS/EN 16174:2012 Sludge, treated biowaste and soil - Digestion of aqua regia soluble fractions of elements

Canadian General Standards Board (CGSB)

ES-AENOR

  • UNE 48-088-1985 Determination of water-insoluble chlorinated carbon compounds
  • UNE 57-100-1986 Determination of insoluble acid content of papermaking pulp

CEN - European Committee for Standardization

  • EN 16173:2012 Sludge@ treated biowaste and soil - Digestion of nitric acid soluble fractions of elements
  • EN 16179:2012 Sludge@ treated biowaste and soil - Guidance for sample pretreatment

GM North America

  • GM 9984286-1997 Exterior Decorative Second Surface Finishes on Plastic Parts

AENOR

  • UNE 48088:1985 DETERMINATION OF INSOLUBLE IN CARBON TETRACHLORIDE ("BREAK")

Aerospace, Security and Defence Industries Association of Europe (ASD)

  • ASD-STAN PREN 2669-2010 Aerospace series Heat resisting nickel base alloy Ni-P96 Melted under vacuum Not heat treated Reference heat treatment : solution treated and precipitation treated Forging stock Edition P2

CH-SNV

  • SNV 81120-1945 mineral oil. Water and other components insoluble in benzene
  • SN EN ISO 54321:2021 Soil, treated biowaste, sludge and waste - Digestion of aqua regia soluble fractions of elements (ISO 54321:2020)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

  • PREN 2669-2010 Aerospace series Heat resisting nickel base alloy Ni-P96 Melted under vacuum Not heat treated Reference heat treatment : solution treated and precipitation treated Forging stock (Edition P2)
  • PREN 2669-1988 Aerospace Series Heat Resisting Nickel Base Alloy Ni-P96 Melted Under Vacuum Not Heat Treated Reference Heat Treatment: Solution Treated and Precipitation Treated Forging Stock (Issue P 1)

TR-TSE

  • TS 2486-1976 SODIUM FLUORIDE FOR INDUSTRIAL USE DETERMINATION OF WATER — INSOLUBLE MATTER

AT-ON

International Truck and Engine Corporation (ITEC)

GOSTR

  • PNST 467-2020 Resources saving. Waste treatment. General requirements for waste disposal from the use of goods

Canadian Standards Association (CSA)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

  • ASHRAE OR-16-C020-2016 The Debate is Over: Physical Water Treatment Meets the Demands of Modern Water Treatment Deliverables

GB-REG

AR-IRAM

  • IRAM 5530-1958 Method for determination of insoluble substances in vegetable oils and petroleum ethers

Japanese Industrial Standards Committee (JISC)

  • JIS K 3805:1990 Testing methods for solute rejection and water flux of reverse osmosis membrane element and module using aqueous solution of various solutes