Flange test method

Flange test method, Total:417 items.

The international standard classification for "Flange test method" includes: Seals for pipe and hose assemblies , Flanges, couplings and joints , Coaxial cables. Waveguides , Lubrication systems , Plain bearings , Farming and forestry in general , Glass .

The Chinese standard classification for "Flange test method" includes: Pipeline fittings , Wave guide coaxial component and accessory , Sliding bearing , Plant quarantine, pest control , Material and component for instrument and meter , Petroleum products in general , Technical Management .

Group Standards of the People's Republic of China

T/SSEA 0331-2023 Determination method of mechanical strength of blue carbon
T/CSTEA 00001-2018 Baiya Qilan Brewing and Tasting Method
T/CPI 13008-2023 175MPa flange performance test method

Professional Standard - Railway

TB/T 1257-1993 Round Flanges
TB/T 1256-1993 Square Flange Gasket
TB/T 1255-1993 Square Flanges

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 12385-2008 Standard test method for sealability of gaskets for pipe flanges
GB/T 7308-2008 Plain bearings - Thin-walled half bearings with or without flange - Tolerances design features and methods of test
GB/T 11449.6-1989 Flanges for waveguides Part 7:Relevant specification for flanges for square waveguides
GB/T 12621-1990 Test method for stress relaxation of gaskets for pipe flanges
GB 11449.6-1989 Waveguide Flanges Part 7: Square Waveguide Flange Specifications
GB/T 12385-1990 Test method for sealing characteristics of gaskets for pipe flanges
GB/T 12622-2008 Standard test method for compressibility and recovery of gaskets for pipe flanges
GB/T 29398-2012 Detection and identification of Eupatorium adenophorum Spreng
GB/T 12622-1990 Test method for compressibility and recorery of gaskets for pipe flanges
GB/T 7962.20-1987 Colourless optical glass test methods; Density
GB/T 12621-2008 Standard test method for stress relaxation of gaskets for pipe flanges
GB/T 17186-1997 Calculating method for strength steel pipe flanged joint

Professional Standard - Commodity Inspection

SN/T 2155-2008 Identification of Cymbidium mosaic virus

工业和信息化部

JB/T 13411-2018 Performance testing method of heat recovery equipments for ezhaust-gas from semi-coke kiln
JB/T 13925-2020 Inspection methods fo polygonal taper shank with flange contact surface

Professional Standard - Light Industry

QB/T 1326.8-1991 Test methods for brandy, whiskey, extracts
QB/T 1326.10-1991 Test methods for brandy, whiskey, odex
QB/T 1326.5-1991 Test method for total acidity of brandy and whiskey
QB/T 1326.9-1991 Test method for total aldehydes in brandy, whiskey and Oedac
QB/T 1326.11-1991 Test methods for brandy, whiskey, odec copper
QB/T 1326.6-1991 Test method for brandy, whiskey, and total esters of Odecyl
QB/T 1326.3-1991 Test method for alcohol content of brandy, whiskey and odec
QB/T 1326.1-1991 General principles of test methods for brandy, whiskey and Oedac

Professional Standard-Ships

CB/T 4228-2013 Hydraulic slip-on square flange

Henan Provincial Standard of the People's Republic of China

DB41/T 1422-2017 Real-time fluorescent RT-PCR detection method for Phalaenopsis chinensis mosaic virus

Professional Standard - Aerospace

QJ 2076.6-1991 Pipe flange O-ring butt welding steel flange
QJ 2076.10-1991 Pipe Flange Flat Flange Cover
QJ 2076.13-1991 Pipe flange O-ring flange cover
QJ 2076.8-1991 Pipe flange butt welding loose sleeve steel flange
QJ 2076.9-1991 Pipe flange O-ring butt welding loose sleeve steel flange
QJ 2076.5-1991 Pipe flange butt welding steel flange
QJ 2076.12-1991 Pipe flange concave flange cover
QJ 2076.4-1991 Pipe Flange Flat Tower Welding Steel Flange
QJ 2076.3-1991 Pipe Flange Cast Steel Flange
QJ 2076.11-1991 Pipe Flange Groove Flange Cover

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 7308.2-2021 Plain bearings—Thin-walled half bearings with or without flange—Part 2:Measurement of wall thickness and flange thickness
GB/T 7308.3-2021 Plain bearings—Thin-walled half bearings with or without flange—Part 3: Measurement of peripheral length

Professional Standard - Petrochemical Industry

SH/T 0160-1992 Determination method for carbon residue of petroleum products (Lange Method)

海关总署

SN/T 5470-2022 Detection and identification of Orchidophilus aterrimus(Waterhouse)

Professional Standard - Electron

SJ 2534.5-1985 Test procedures for antennas-Special measurement techniques

National Metrological Technical Specifications of the People's Republic of China

JJF(纺织) 10-1985 Verification method of Y802 eight blue oven

Professional Standard - Machinery

JB/T 9499.7-1999 Method for chemical analysis of constantan resistance alloy The molybdosilicate blue photometric method for the deternination of silicon content

Professional Standard - Textile

FZ/T 92048-1995 Flange

Military Standard of the People's Republic of China-General Armament Department

GJB 383.11-1988 Telemetry system and subsystem test methods Telemetry antenna test methods
GJB 3384-1998 Lamb wave inspection method for metal sheets
GJB 7705-2012 DSP test method
GJB 383.17A-1997 Telemetry system and subsystem test methods Measurement tape test methods
GJB 383.27-1994 Telemetry system, sub-system test method, time coder test method
GJB 383.16A-1997 Telemetry system and sub-system testing methods Measurement magnetic head testing methods
GJB 383.16-1988 Telemetry system and sub-system testing methods Measurement magnetic head testing methods

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 383.28-1994 The test methods for telemetry systems and subsystems The test methods for PAM decommutator

RU-GOST R

GOST 8693-1980 Metal pipes. Method of flange testing
GOST 14352-1973 Cognac spirits. Method for determination of furfural
GOST 14138-1976 Cognac and cognac spirits. Method for determination of higher alcohols
GOST 23943-1980 Wines and konjaks. Methods of determination of bottle tilling

ET-QSAE

ES C.D8.490-1973 Portland cement sampling and testing methods

American Society for Testing and Materials (ASTM)

ASTM D376-70e1 Methods of Test for Holland Cloth
ASTM D6644-01 Standard Test Method for Tension Strength of Sew-Through Flange Buttons
ASTM RR-D02-1009 1974 D0092-Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM RR-D02-1008 1992 D0092-Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM D6644-01(2021) Standard Test Method for Tension Strength of Sew-Through Flange Buttons
ASTM D5171-00(2006) Standard Test Method for Impact Resistance of Plastic Sew-Through Flange Buttons
ASTM D5171-09 Standard Test Method for Impact Resistance of Plastic Sew-Through Buttons
ASTM D5171-15(2020) Standard Test Method for Impact Resistance of Plastic Sew-Through Flange Buttons
ASTM D5171-00 Standard Test Method for Impact Resistance of Plastic Sew-Through Flange Buttons
ASTM C1365-18 Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
ASTM D92-98a Standard Test Method for Flash and Fire Points by Cleveland Open Cup
ASTM D524-10 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
ASTM D92-05a Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM C1565-17 Standard Test Method for Determination of Pack-Set Index of Portland and Blended Hydraulic Cements
ASTM D92-16b Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM RR-D02-1900 2019 D8254-Test Method for Flash and Fire Points of Asphalt by Cleveland Open Cup Tester
ASTM D92-16 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM D92-01 Standard Test Method for Flash and Fire Points by Cleveland Open Cup
ASTM C1356-96(2001) Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure
ASTM D92-18 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM D92-05 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM D524-00e1 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
ASTM F1943-98 Standard Test Method for Determining the Dynamic Thermal Response of Thermal Mass Transfer Ribbon Products-Atlantek Method
ASTM D524-00 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
ASTM D524-03 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
ASTM D524-04 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
ASTM D92-05a(2010) Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM D5264-98(2011) Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester
ASTM D8254-19 Standard Test Method for Flash and Fire Points of Asphalt by Cleveland Open Cup Tester
ASTM D92-02 Standard Test Method for Flash and Fire Points by Cleveland Open Cup
ASTM C1565-19 Standard Test Method for Determination of Pack-Set Index of Portland and Blended Hydraulic Cements
ASTM F1571-95(2008) Standard Test Method for Determination of Abrasion and Smudge Resistance of Images Produced from Business Copy Products (Sutherland Method)
ASTM D92-92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup

SCC

DIN ISO 8116-4 E:2007 Draft Document - Textile machinery and accessories - Beams for winding - Part 4: Test methods and quality classification of flanges for weaver's beams, warper's beams and sectional beams (ISO/DIS 8116-4:2007)
NS 3093:1970 Portlandcement — Methods for determination of titanium
NS 3092:1970 Portlandcement — Methods for determination of manganese
NS 3094:1970 Portlandcement — Methods for determination of phosphorus
AASHTO T 98-1999(2004) Standard Method of Test for Fineness of Portland Cement by the Turbidimeter
NS 3095:1970 Krom — Portlandcement — Methods for determination of chromium
NS 3049:1970 Portlandcement — Methods for testing of physical properties
VDI 3359-2013 Sheet metal pulls — collar pulling
Doc 1676-1971 Methods of testing soils for engineering purposes Determination of static cone penetration resistance (Dutch cone test)
AASHTO T 48-2006(2015) Standard Method of Test for Flash and Fire Points by Cleveland Open Cup (ASTM Designation: D92-05a)
IEC 60154-1:1964 Flanges for waveguides - Part 1: General requirements and measuring methods
DANSK DS/HD 129.7 S1:2016 Flanges for waveguides – Part 7: Relevant specifications for flanges for square waveguides
AASHTO T 271-1983(2004) Standard Method of Test for Density of Plastic and Hardened Portland Cement Concrete In-Place by Nuclear Methods
NS 3096:1970 Portland cement — Methods for determination of potassium and sodium
BS EN 1591-1:2001+A1:2009 Flanges and their joints. Design rules for gasketed circular flange connections-Calculation method
NS 3090:1970 Portlandcement — Methods for determination of the main constituents
NS 3091:1970 Portlandcement — Methods for determination of free lime
BS EN 1591-1:2001 Flanges and their joints. Design rules for gasketed circular flange connections. Calculation method
AASHTO T 107-2003 Standard Method of Test for Autoclave Expansion of Portland Cement (ASTM Designation: C151-00)
BS 2035:1953 Cast iron flanged pipes and flanged fittings
MIL MIL-DTL-3922/54E-2013 Flanges, Waveguide (Cover) (Square, 4 Hole)
MIL MIL-DTL-3922/54D-2008 Flanges, Waveguide (Cover) (Square, 4 Hole)
AASHTO T 98M/T 98-2012(2020) Standard Method of Test for Fineness of Portland Cement by the Turbidimeter (ASTM C115/C115M-10e1)
DIN 30691 E:2024 Draft Document - Lightning current tests - flanges with electrically conductive gaskets
NS-EN 1591-1:2001 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method
AENOR UNE 25079-2:1970 Tolerances for leaf spring flanges of railway material. Cold flanged (Any type of flange)
NS-EN 1591-1:2001+A1:2009 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method
AENOR UNE-CEN/TS 1591-3 EX:2013 Flanges and their joints - Design rules for gasketed circular flange connections - Part 3: Calculation method for metal to metal contact type flanged joint
DANSK DS/CEN/TS 1591-3:2007 Flanges and their joints - Design rules for gasketed circular flange connections - Part 3: Calculation method for metal to metal contact type flanged joint
SN-CEN/TS 1591-3:2007 Flanges and their joints — Design rules for gasketed circular flange connections — Part 3: Calculation method for metal to metal contact type flanged joint
AENOR UNE 25079-1:1970 Tolerances for leaf spring flanges of railway material. Hot flanged (Any type of flange)
CSA Z245.12-2001 Steel Flanges
DANSK DS/EN 13555:2021 Flanges and their joints – Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
NS-EN 13555:2014 Flanges and their joints — Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
NS-EN 13555:2021 Flanges and their joints — Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
AENOR UNE-EN 13555:2014 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
AENOR UNE 80404:2018 Cement testing methods. Validation of cement testing methods.
NS-EN 13555:2004 Flanges and their joints — Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
CSA Z245.12-1996 Steel Flanges
CSA Z245.12-2005 Steel Flanges
AENOR UNE 26003:1949 GEARBOX FLANGES. HOUSING AND ENGINE FLANGES
NS 3097:1970 Portlandcement — Methods for determination of aluminium (expressed as Al203)
AASHTO T 48-2018 Standard Method of Test for Flash Point of Asphalt Binder by Cleveland Open Cup
AASHTO T 48-2017 Standard Method of Test for Flash Point of Asphalt Binder by Cleveland Open Cup
CAN/CGSB-4.2 No.33-1994(C2013) Textile testing methods - Pressing methods
BS 4689:1980 Method for determination of flash and fire points of petroleum products: Cleveland open cup method
BS 4689:1971 Method for determination of flash and fire points of petroleum products: Cleveland open cup method
CAN/CGSB-4.2 No./No.33.1-M86-1986 Textile Test Methods Method of Pressing Ironing
AASHTO T 309-2022 Standard Method of Test for Temperature of Freshly Mixed Portland Cement Concrete
DANSK DS/ISO 9186-1:2014 Graphical symbols - Test methods - Method for testing comprehensibility
ETSI EG 203 647:2020 Methods for Testing and Specification (MTS); Methodology for RESTful APIs specifications and testing
AASHTO T 309-2015(2019) Standard Method of Test for Temperature of Freshly Mixed Portland Cement Concrete
BS 1560:1949 Steel pipe flanges and flanged fittings for the petroleum industry
NS 1780:1981 Flanges - Dimensions for flanges of cast iron - Nominal pressure PN 40
NS 1786:1981 Flanges - Dimensions for flanges of cast steel - Nominal pressure PN 160
BS EN 22592:1994 Methods of test for petroleum and its products. Petroleum products. Determination of flash and fire points. Cleveland open cup method
MIL MIL-F-3922/69-1975 FLANGE, WAVEGUIDE (CHOKE) (SQUARE, 4 HOLE)
MIL MIL-DTL-3922/59F-2010 Flanges, Waveguide (Choke) (Square, 4 Hole)
BS PD CEN/TR 1591-5:2012 Flanges and their joints. Design rules for gasketed circular flange connections-Calculation method for full face gasketed joints
NS 1779:1981 Flanges - Dimensions for flanges of cast iron - Nominal pressure PN 25

Malaysia Standards

MS 914-1984 Cleveland open cup method for testing flash point and fire point

Spanish Association for Standardization (UNE)

UNE 80-118-1986 Test methods for cement. Semi-adiabatic method for determination of heat of hydration in physical testing of cement (Langerfarter calorimetry)
UNE 102032:1984 BUILDING PLASTER AND BUILDING MOLAINS PLASTER. CHEMICAL TESTING METHODS
UNE-HD 129.7S1:1977 FLANGES FOR WAVEGUIDES. PART 7: RELEVANT SPECIFICATIONS FOR FLANGES FOR SQUARE WAVEGUIDES. (Endorsed by AENOR in May of 1995.)
UNE 18-094-1990 Spherical radial bearing with flange on the outer ring. Flange measurement
UNE 18-094-1989 Spherical radial bearing with flange on the outer ring. Flange measurement
UNE-EN 1591-1:2002+A1:2009 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method
UNE-EN 1591-1:2002 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method.
UNE-EN 13555:2014 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
UNE 80404:2018 Methods of testing cement. Validation of cement test methods.
UNE-CEN/TS 1591-3:2013 EX Flanges and their joints - Design rules for gasketed circular flange connections - Part 3: Calculation method for metal to metal contact type flanged joint
UNE-EN 13555:2021 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
UNE 18094:1989 ROLLER BALL BEARINGS WITH FLANGED OUTER RING. FLANGE DIMENSIONS.

Japanese Industrial Standards Committee (JISC)

JIS B 2490:2008 Test method for sealing behavior of gaskets for pipe flanges
JIS A 1220:2001 Method for Dutch double-tube cone penetration test
JIS A 1220:1995 Method for Dutch double-tube cone penetration test
JIS K 2265-4:2007 Determination of flash points -- Part 4: Cleveland open cup method
JIS B 1585-1:2017 Plain bearings -- Thin-walled half bearings with or without flange -- Part 1: Tolerances, design features and methods of test
JIS B 1585-2:2017 Plain bearings -- Thin-walled half bearings with or without flange -- Part 2: Measurement of wall thickness and flange thickness

Standard Association of Australia （SAA）

AS 2350 (Frc) Methods of testing portland and blended cements
AS 2350 (Lst) Methods of testing portland and blended cements
AS 2350.1:1982 Methods of testing Portland and blended cements - Cement test certificates
AS 2350.2:2006(R2016) Methods of testing portland and blended cements - Chemical composition of portland cement
AS 1301.P202M:1975 Methods of test for pulp and paper (metric units), Method P202M: Laboratory processing of pulp - Lampen mill method
AS 2350.2:1991 Methods of testing portland and blended cements - Chemical composition of portland cement
AS 1301.P202S:1980 Methods of test for pulp and paper (metric units), Method P202S: Laboratory processing of pulp - Lampen mill method
AS A104:1969 Method for the determination of the compressive strength of portlandcement concrete test specimens
AS 2350.13/AMD 1:1997 Methods of testing portland and blended cements Method 13: Determination of drying shrinkage of portland and blended cement mortars; Amendemnt 1
AS 1289.3.1.2:2009 Soil test methods for engineering Soil classification test Determination of soil liquid limit One-point Casagrande method (auxiliary method)
AS 1289.3.1.2:2009(R2017) Soil test methods for engineering Soil classification test Determination of soil liquid limit One-point Casagrande method (auxiliary method)
AS 1289.3.1.2:2009/Amdt 1:2015 Soil test methods for engineering Soil classification test Determination of soil liquid limit One-point Casagrande method (auxiliary method)
AS 1289.3.1.1:2009(R2017) Soil test methods for engineering use. Soil classification test. Determination of soil liquid limit. Four-point Casagrande method.
AS 2350.15:1995 Methods of testing portland and blended cements - Water-soluble chromate content of portland cement
AS 2350.15:1995(R2016) Methods of testing portland and blended cements - Water-soluble chromate content of portland cement
AS 1289.3.1.1:2009 Soil test methods for engineering use. Soil classification test. Determination of soil liquid limit. Four-point Casagrande method.
AS 1289.3.1.1:2009/Amdt 1:2015 Soil test methods for engineering use. Soil classification test. Determination of soil liquid limit. Four-point Casagrande method.
AS 1289.3.1.1:1995/Amdt 1:1998 Soil test methods for engineering use. Soil classification test. Determination of soil liquid limit. Four-point Casagrande method.
AS P1.P202M:1963 Methods of test for pulp and paper - Laboratory processing of pulp - Lampen mill method
AS 2350.7:1980 Methods of testing portland and blended cements - Heat of hydration of portland cement
AS 2350.13:1995 Methods of testing portland and blended cements - Determination of drying shrinkage of portland and blended cement mortars
AS 1315:1973 Specification and methods of test for portland cement (metric units)
AS 2350.13:2006(R2016) Methods of testing portland and blended cements - Determination of drying shrinkage of portland and blended cement mortars
AS 2350.9:2006(R2016) Methods of testing portland and blended cements - Determination of residue on the 45 micrometre sieve
AS 2350.9:1997 Methods of testing portland and blended cements - Determination of residue on the 45 micrometre sieve
AS/NZS 3629.1:2024 Methods of testing child restraints, Method 1: Dynamic testing
AS A89.21:1973 Methods of testing soils for engineering purposes, Method 21: Compaction control test (Hilf method)

VE-FONDONORMA

NORVEN 372-1976 Venezuelan national standard test method for melting point (Cleveland test method)

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 2350.0:1999 Methods of testing portland and blended cements - General introduction and list of methods
AS/NZS 2350.0:1999(R2016) Methods of testing portland and blended cements - General introduction and list of methods
AS/NZS 2350.8:2006/AMD 1:2008 Methods of testing portland and blended cement - Fineness index of portland cement by air permeability method
AS/NZS 2350.8:1999 Methods of testing portland and blended cement - Fineness index of portland cement by air permeability method
AS/NZS 2350.8:2006(R2016) Methods of testing portland and blended cement - Fineness index of portland cement by air permeability method
AS/NZS 4331.1:1995 Metallic flanges - Steel flanges
AS/NZS 4331.2:1995 Metallic flanges - Cast iron flanges
AS/NZS 2350.5:1999 Methods of testing portland and blended cements - Determination of soundness of portland and blended cements
AS/NZS 2350.4:1999 Methods of testing portland and blended cements - Setting time of portland and blended cements
AS/NZS 2350.3:1999 Methods of testing portland and blended cements - Normal consistency of portland and blended cements
AS/NZS 2350.11:1997 Methods of testing portland and blended cements - Compressive strength of portland and blended cement
AS/NZS ISO 16900.7:2021 Respiratory protective devices — Methods of test and test equipment, Method 7: Practical performance test methods
AS/NZS 2350.8:2006 Methods of testing portland, blended and masonry cements - Fineness index by air permeability method
AS/NZS 4823.4:2006 Feather and down—Methods of test Method 4: Sampling in view of tests
AS/NZS 3629.1:1995 Methods of testing child restraints, Method 1: Dynamic testing

Korean Agency for Technology and Standards (KATS)

KS L 5119-2017 Standard testing method for early stiffening of portland cement (Mortar method)
KS L 5106-2009(2019) Testing method for fineness of portland cement by air permeability apparatus
KS C IEC 60154-7:2013 Flanges for waveguides－Part 7：Relevant specifications for flanges for square waveguides
KS C IEC 60154-7-2013 Flanges for waveguides－Part 7：Relevant specifications for flanges for square waveguides
KS C IEC 60154-7:2007 Flanges for waveguides-Part 7:Relevant specifications for flanges for square waveguides
KS C 6603-1971 Type designation system for waveguides and flanges
KS C IEC 60154-7-2007(2013) Flanges for waveguides－Part 7：Relevant specifications for flanges for square waveguides
KS B ISO 7005-1:2007 Metallic flanges－Part 1：Steel flanges
KS B ISO 7005-2-2023 Metallic flanges－Part 2：Cast iron flanges
KS B ISO 7005-1:2003 Metallic flanges－Part 1：Steel flanges
KS B ISO 7005-2:2008 Metallic flanges-Part 2:Cast iron flanges
KS B ISO 7005-2-2008(2018) Metallic flanges－Part 2：Cast iron flanges

CZ-CSN

CSN 56 0210 Cast.6-1985 Testing methods of alcoholic beverages. Determination of acids in wine distillate and brandy
CSN 56 0210 Cast.11-1986 Testing methods of alcoholic beverages. Determination of fural in brandy and wine distillate
CSN 56 0210 Cast.9-1985 Testing methods of alcoholic beverages. Determination of methyl alcohol in brandy and wine distillate
CSN 66 0805 Z4-1994 Amendment
CSN 56 0210 Cast.10-1986 Testing methods of alcoholic beverages. Determination of high molecular weight alcohols in brandy and wine distillate
CSN 13 2082-1976 Blank flanges
CSN 13 2016-1976 Flanged pipes
CSN 65 1091-1981 Sulphur — Methods of testing

British Standards Institution (BSI)

BS EN ISO 3262-3:2023 Extenders. Specifications and methods of test. Blanc fixe
DD CEN/TS 1591-3:2007 Flanges and their joints. Design rules for gasketed circular flange connections - Calculation method for metal to metal contact type flanged joint
BS EN 1591-1:2013 Flanges and their joints. Design rules for gasketed circular flange connections. Calculation
BS EN 1591-1+A1:2001 Flanges and their joints. Design rules for gasketed circular flange connections. Calculation method
BS EN 13555:2004 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
BS EN 13555:2021 Flanges and their joints. Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
BS ISO 3548-1:2022 Plain bearings. Thin-walled half bearings with or without flange - Tolerances, design features and methods of test
BS EN 13555:2014 Flanges and their joints. Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
BS 2035:1966 Specification for cast iron flanged pipes and flanged fittings
BS 7506-2:1996 Methods for measurement in electrostatics - Test methods
BS DD CEN/TS 1591-3:2007 Flanges and their joints - Design rules for gasketed circular flange connections - Calculation method for metal to metal contact type flanged joint
BS EN 1514-2:2014 Flanges and their joints. Gaskets for PN-designated flanges. Spiral wound gaskets for use with steel flanges
BS ISO 9186-2:2008 Graphical symbols - Test methods - Method for testing perceptual quality
BS EN 60154-4:2017 Flanges for waveguides - Relevant specifications for flanges for circular waveguides
BS ISO 5429:2012 Coated abrasives. Flap wheels with incorporated flanges or separate flanges

International Organization for Standardization (ISO)

ISO 5565-2:1999 Vanilla [Vanilla fragrans (Salisbury) Ames] - Part 2: Test methods
ISO 7005-1:1992 Metallic flanges; part 1: steel flanges
ISO 7005-2:1988 Metallic flanges; part 2: cast iron flanges
ISO 4262:1993 Petroleum products; determination of carbon residue; Ramsbottom method

Association Francaise de Normalisation

NF V32-085-2*NF ISO 5565-2:2000 Vanilla (Vanilla fragrans (Salisbury) Ames) - Part 2 : test methods
NF E62-116:1986 Grinding machines. Flanges for the mounting of grinding wheels. Design rules. Testing method.
NF L43-601:1974 Flanged connections - Flanges for unions.
NF EN 846-4/A1:2005 Methods of testing accessory masonry components - Part 4: determination of strength and stiffness of fixing flanges
NF EN 846-4:2002 Methods of testing accessory masonry components - Part 4: determination of strength and stiffness of fixing flanges
NF E29-903:2014 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
NF E29-903:2005 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections.
NF E86-400-1/IN1:2009 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1 : calculation method.
NF E23-903:2021 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
NF E48-054:1998 Hydraulic fluid power. One-piece square flanges with recessed flange head PN 250 and PN 400. Dimensions.
XP E86-400-3*XP CEN/TS 1591-3:2007 Flanges and their joints - Design rules for gasketed circular flange connections - Part 3 : calculation method for metal to metal contact type flanged joint
NF EN 1591-1:2014 Flanges and their assemblies - Rules for calculating circular flange assemblies with gaskets - Part 1: calculation method
XP CEN/TS 1591-3:2007 Flanges and their assemblies - Rules for calculating circular flange assemblies with gasket - Part 3: calculation method for metal-to-metal contact type flange assemblies
NF E86-400-1*NF EN 1591-1:2014 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1 : calculation method
NF E86-400-1:2009 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1 : calculation method.

SE-SIS

SIS SS 11 26 42-1986 Metallic materials - Tubes - Flanging test
SIS SS 15 51 66-1985 Petroleum products — Determination of carbon residue — Ramsbottom method
SIS SS 15 51 66-1979 Petroleum products — Determination of carbon residue — Ramsbottom method

IN-BIS

IS 10738 Pt.6/Sec.2-1991 Specification for Waveguide Flanges Part 6 Square Waveguide Flanges Section 2: Type K Flanges
IS 10738 Pt.6/Sec.1-1991 Specification for Waveguide Flanges Part 6 Square Slot Flanges Section 1: General Principles
IS 10738 Pt.4/Sec.2-1992 Waveguide Flanges—Specification Part 4 Circular Waveguide Flanges Section 2: Flange Type J
IS 10738 Pt.1-1983 Waveguide Flange Specification Part 1 General Requirements and Tests

WRC - Welding Research Council

BULLETIN 468-2002 LEAK TESTING OF A RAISED FACE WELD NECK FLANGE
BULLETIN 391-1994 ELEVATED TEMPERATURE TESTING OF GASKETS FOR BOLTED FLANGED CONNECTIONS

NO-SN

NS 3093-1970 Portlandcement - Methods for determination of titanium
NS 3095-1970 Krom - Portlandcement - Methods for determination of chromium

AASHTO - American Association of State Highway and Transportation Officials

T186-1991 Standard Method of Test for Early Stiffening of Portland Cement (Paste Method) (ASTM C451-83)
T48-1994 Standard Method of Test for Flash and Fire Points by Cleveland Open Cup
T 48-2017 Standard Method of Test for Flash and Fire Points by Cleveland Open Cup
T 48-2006 Standard Method of Test for Flash and Fire Points by Cleveland Open Cup
T 309-2015 Standard Method of Test for Temperature of Freshly Mixed Portland Cement Concrete
T 178-2009 Standard Method of Test for Cement Content of Hardened Portland Cement Concrete
T309-1999 Standard Method of Test for Temperature of Freshly Mixed Portland Cement Concrete (Nineteenth Edition; Revised Per Interim Specifications - Tests and Methods - 1999)
T 107-2003 Standard Method of Test for Autoclave Expansion of Portland Cement (ASTM Designation: C 151-00)

American Welding Society (AWS)

WRC 468:2002 Leak Testing of a Raised Face Weld Neck Flange
WRC 391:1994 Elevated Temperature Testing of Gaskets for Bolted Flanged Connections

The American Road & Transportation Builders Association

AASHTO T 98M/T 98-2012(R2020) Standard Method of Test for Fineness of Portland Cement by the Turbidimeter
AASHTO T 309-2020 Standard Method of Test for Temperature of Freshly Mixed Portland Cement Concrete
AASHTO T 309-2015 Standard Method of Test for Temperature of Freshly Mixed Portland Cement Concrete
AASHTO T 271-83(R2004) Standard Method of Test for Density of Plastic and Hardened Portland Cement Concrete In-Place by Nuclear Methods
AASHTO T 48-2006 Standard Method of Test for Flash and Fire Points by Cleveland Open Cup
AASHTO T 178-2015(R2019) Standard Method of Test for Portland Cement Content of Hardened Hydraulic-Cement Concrete
AASHTO T48-1999 Standard Method of Test for Flash and Fire Points by Cleveland Open Cup Twentieth Edition
AASHTO T 48-2022 Standard Method of Test for Flash Point of Asphalt Binder by Cleveland Open Cup

VN-TCVN

TCVN 7498-2005 Bitumen.Test method for flash and fire points by Cleveland open cup tester
TCVN 6820-2015 Porland cement containing barium - Test methods for chemical analysis
TCVN 6324-2010 Standard test method for conradson residue of petroleum products
TCVN 6018-2011 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products

GSO

OS GSO IEC 60154-7:2014 Flanges for waveguides - Part 7: Relevant specifications for flanges for square waveguides
GSO ISO 7005-1:2009 Metallic flanges - Part 1: Steel flanges
GSO ISO 10509:2015 Hexagon flange head tapping screws
GSO ISO 7005-2:2009 Metallic flanges - Part 2: Cast iron flanges
GSO 1239:2002 Method of test for sulphur- determination or tellurium content-
GSO 1241:2002 Methods of test for sulphur determination of selenium content
GSO 1238:2002 Methods of test for sulphur determination of total carbon content
GSO 1244:2002 Methods of test for sulphur determination of acidity
OS GSO ISO 7005-2:2009 Metallic flanges - Part 2: Cast iron flanges

American Society of Mechanical Engineers (ASME)

ASME B16.5-1988 Pipe flanges and flanged fittings
ASME B16.1-1989 Cast iron pipe flanges and flanged fittings
ASME B16.5-2003 Pipe Flanges and Flanged Fittings: NPS 1/2 through 24
ASME B16.5 Errata-1988 Pipe flanges and flanged fittings; Errata
ASME B16.5a Addenda-1992 Pipe flanges and flanged fittings; Addenda
ASME B16.5-1996 Pipe flanges and flanged fittings - NPS 1/2 through NPS 24
ASME B16.5 INTERPRETATIONS-2002 Interpretations to B16.5 Pipe Flanges and Flanged Fittings (Includes Interpretations Through No. 4)

BE-NBN

NBN 950-1971 Flange. Pig iron flange PN 16
NBN 951-1971 Flange. Pig iron flange PN 25
NBN 949-1971 Flange. Pig iron flange PN 10
NBN 952-1971 Flange. Pig iron flange PN 40
NBN 946-1971 Steel flange. Movable flange PN6
NBN 947-1971 Steel flange. Movable flange PN10
NBN 958-1971 Flange. Round attachment flange size PN25
NBN 955-1971 Flange. Round attachment flange size PN6
NBN 956-1971 Flange. Round attachment flange size PN10
NBN 959-1971 Flange. Round attachment flange size PN40
NBN E 29-105-1974 Round flange. Flange joint size PN25
NBN 957-1971 Flange. Round attachment flange size PN16
NBN 940-1971 Steel flange. Base welding flange PN10
NBN 943-1971 Steel flange. Base welding flange PN40
NBN 942-1971 Steel flange. Base welding flange PN25
NBN 937-1971 Steel flange. Flat bottom welding flange PN10
NBN 941-1971 Steel flange. Base welding flange PN16
NBN 938-1971 Steel flange. Flat bottom welding flange PN16
NBN 52.045-1955 Residual Carbon (Lambs Bottom Method) Method NBN 52.045
NBN 936-1971 Steel flange. Flat bottom welding flange PN 6
NBN E 29-118-1974 Round steel flange. Base welding flange PN10
NBN 939-1971 Steel flange. Base welding flange PN 6
NBN 944-1971 Steel flange. Sleeve threaded round flange PN 6

BR-ABNT

ABNT MB-50-1964 Test Methods for Flash Point and Fire Point Testing (Cleveland Open Containers)
ABNT EB-451-1980 flange

South African Bureau of Standard

SANS 3548:2005 Plain bearings - Thin-walled half bearings with or without flange - Tolerances, design features and methods of test
SANS 1123:2007 Pipe flanges

TR-TSE

TS 123-1978 STANDARD METHODS OF TEST FOR FLASH AND F?RE POINTS OF PETROLEUM PRODUCTS BY CLEVELAND ?PEN CUP

FI-SFS

SFS 2169-1967 Single flange, flange plate and flange shoulder. Rated pressure PN6
SFS 2170-1967 Single flange, flange plate and flange shoulder. Rated pressure PN10
SFS 8005-1987 In case of interpretation disputes the Finnish text applies
SFS 8006-1987 In case of interpretation disputes the Finnish textapplies
SFS 9025-1987 shipbuilding. Flange. Movable flange for waste gas pipeline
SFS 9022-1987 In case of interpretation disputes the Finnish text applies

German Institute for Standardization

DIN 28404:1986-10 Vacuum technology; flanges; dimensions
DIN 2528:1991 Steel flanges; technical delivery conditions
DIN 16966-7:1995-04 Pipe joints and their elements of glass fibre reinforced polyester resins - Part 7: Bushings, flanges, flanged and butt joints; general quality requirements and test methods
DIN 28460:1987-11 Flanges for tank trucks; welding flanges for aluminium tubes
DIN 24193-3:1988 Ducting for ventilation equipment; flanges; series 3; flat and angle flanges
DIN EN 1591-1:2001 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method
DIN CEN/TS 1591-3:2007-10 Flanges and their joints - Design rules for gasketed circular flange connections - Part 3: Calculation method for metal to metal contact type flanged joint; German version CEN/TS 1591-3:2007
DIN 24193-2:1988 Ducting for ventilation equipment; flanges; series 2; flat and angle flanges
DIN 28461:1987-11 Flanges for tank trucks; plain welding flanges for steel tubes
DIN 52913:2002-04 Testing of static gaskets for flange connections - Compression creep testing of gaskets made from sheets
DIN EN 13555:2021-04 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections; German version EN 13555:2021
DIN CEN/TS 1591-3:2007 Flanges and their joints - Design rules for gasketed circular flange connections - Part 3: Calculation method for metal to metal contact type flanged joint; German version CEN/TS 1591-3:2007
DIN EN 1591-1 E:2021-05 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method

International Electrotechnical Commission (IEC)

IEC 61075:1991 Loran-C receivers for ships; minimum performance standards; methods of testing and required test results
IEC 60154-7:1974 Flanges for waveguides. Part 7 : Relevant specifications for flanges for square waveguides

European Committee for Standardization (CEN)

HD 129.7 S1-1977 Flanges for waveguides; part 7: relevant specifications for flanges for square waveguides

RO-ASRO

STAS 8515-1985 Steel flanges BLIND FLANGES NP 160 Dimensions
STAS 4269-1987 Steel flanges ROUND PLAIN SGREWED FLAN- GES NP 6 Dimensions
STAS 8013-1984 Steel flanges ROUND, PLAIN FLANGKS FORWKLDING NP 10 Dimensions
STAS 2765-1991 Steel flanges. Oval threaded flanges NP 6. Dimensions
STAS 4791-1985 Steel flanges ROUND FLANGES, DETACHED ON PIPE PN 6 Dimensions
STAS 2520-1975 Forged steel flanges ROUND NECK SGREWED FLANGES NP 64 Dimensions

Defense Logistics Agency

DLA MIL-DTL-3922/54 E-2013 FLANGES, WAVEGUIDE (COVER) (SQUARE, 4 HOLE)
DLA MIL-DTL-3922/54 D-2008 FLANGES, WAVEGUIDE (COVER) (SQUARE, 4 HOLE)
DLA MIL-DTL-17376/2 B-2012 CAPS AND FLANGES COMPRESSED-GAS CYLINDER: FLANGES, LOW PRESSURE
DLA MIL-DTL-17376/3 B-2012 CAPS AND FLANGES COMPRESSED-GAS CYLINDER: FLANGES, HIGH PRESSURE
DLA MIL-DTL-3922/59 F-2010 FLANGES, WAVEGUIDE (CHOKE) (SQUARE, 4 HOLE)
DLA MIL-F-3922/69 VALID NOTICE 2-2008 Flange, Waveguide (Choke) (Square, 4 Hole)

Society of Automotive Engineers (SAE)

SAE RS-327-1-1950 RS327 Square Flange and Drive.1.437 P.C.Dia.
SAE RS-329-1-1950 RS329 Square Flange and Drive 2.625 P.C.Dia.
SAE RS-338-1-1949 RS338 2.175 P.C. Dia. Square Accessory Flange

PL-PKN

PN Z04153-02-1986 Air purity protection ests for thiram etermination of thiram in work laces by colorimetri?ue
PN C04404-18-1987 Pigments for paints General testing methods General testing methods

GM Daewoo

GMKOREA EDS-T-7741-2011 Test Method for Flash Point of Petroleum Products Using the Cleveland Open Cup Method (4th ed.; English/Korean)

ETSI - European Telecommunications Standards Institute

TR 102 200-2003 Methods for Testing and Specification (MTS); UMTS Testing Methodology (V1.1.1)

American National Standards Institute （ANSI)

ANSI/ASME B16.1-2010 Gray Iron Pipe Flanges and Flanged Fittings
ANSI/ASME B16.42-2011 Ductile Iron Pipe Flanges and Flanged Fittings

KR-KS

KS B ISO 7005-1-2003 Metallic flanges－Part 1：Steel flanges
KS B ISO 7005-2-2008(2023) Metallic flanges－Part 2：Cast iron flanges

International Telecommunication Union (ITU)

ITU-T SERIES G SUPP 19-1984 Digital crosstalk measurement (method used by the Administrations of France the Netherlands and Spain)
ITU-T SERIE G SUPP 19 SPANISH-1984 Digital crosstalk measurement (method used by the Administrations of France, the Netherlands and Spain)

Lithuanian Standards Office

LST EN 1591-1-2002+A1-2009/AC-2011 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method
LST EN 1591-1-2002+A1-2009 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method
LST EN 13555-2021 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
LST EN 13555-2005 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections

Danish Standards Foundation

DS/EN 1591-1+A1:2009 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method
DS/EN 13555:2005 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
DS/EN 13555:2021 Flanges and their joints – Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
DS/CEN/TS 1591-3:2007 Flanges and their joints - Design rules for gasketed circular flange connections - Part 3: Calculation method for metal to metal contact type flanged joint

Canadian Standards Association (CSA)

CSA Z245.12-2021 Steel flanges

AIA/NAS - Aerospace Industries Association of America Inc.

NASM1312-32-1998 Fastener Test Method; Method 32@ Barrel Nut Test

PT-IPQ

NP EN 1092-2-2000 Flanges and their joints Circular flanges for pipes,valves,fittings and accessories,PN designated Part 2:Cast iron flanges

IT-UNI

UNI EN 13555-2021 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections