One-stop supercapacitor testing equipment

One-stop supercapacitor testing equipment, Total:151 items.

The international standard classification for "One-stop supercapacitor testing equipment" includes: Electromagnetic compatibility(EMC) , Ceramic and mica capacitors .

The Chinese standard classification for "One-stop supercapacitor testing equipment" includes: Basic standards and general methods , Capacitor .

Shandong Provincial Standard of the People's Republic of China

DB37/T 1941-2011 General specifications for supercapacitors used in electronic equipment

Professional Standard - Electricity

DL/T 1652-2016 Technical specifications of supercapacitors use in electric energy metering device
DL/T 2639-2023 Test method for integrated wiring of equipment in substation intervals

Heilongjiang Provincial Standard of the People's Republic of China

DB23/T 1796-2016 Super capacitor tester technical requirements

工业和信息化部

SJ/T 11582-2016 Test method for electrical performance of power supercapacitors
YD/T 1633-2016 Field test methods for electromagnetic compatibility of telecommunications equipment
YD/T 2583.17-2019 Requirement and Measurement Methods of Electromagnetic Compatibility for Mobile Telecommunications Equipment Part 17: 5G Base Station and Ancillary Equipment
YD/T 2583.1-2018 Electromagnetic compatibility requirement and measurement methods for celluar mobile communication equipment Part 1:base station and ancillary equipment
YD/T 2583.3.3-2016 Electromagnetic compatibility performance requirements and measurement methods for cellular mobile communications equipment Part 3: Multimode base stations and their auxiliary equipment

Group Standards of the People's Republic of China

T/CESA 1051-2019 Supercapacitor safety specification-Part 2:Test method
T/CESA 1054-2018 Test methods for Porous carbons for electrodes of supercapacitors
T/CITSA 08.3-2021 Test standards for super-capacitor cell and module of railway transportation equipment
T/TBPS 4009-2022 Product?Specification?and?Test?Method?of?Intelligent?Maintenance-free?Super?Capacitor?DC?Power?Supply
T/HEBQIA 245-2024 One-stop technical service for power distribution and control equipment
T/CEC 611-2022 Technical Guidelines for Acoustic Imaging Testing of Substation Equipment
T/CSEE 0228-2021 Technical specifications for acoustic imaging testing of substation equipment

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1498-2014 Double-layer fixed capacitors (supercapacitors) for electrical equipment - Part 1: General specifications

未注明发布机构

IEEE Std 323-2016 IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations

Professional Standard - Post and Telecommunication

YD/T 2583.13-2013 Requirements and testing methods for electromagnetic compatibility for cellular mobile communication equipment Part 13: LTE base station and ancillary equipment

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 6261-1998 Fixed capacitors for use in electronic equipment- Part 5:Sectional specification -Fixed mica dielectric d.c. capacitors with a rated voltage not exceeding 3000 V -Selection of methods o

PL-PKN

PN M34801-01-1987 Auxiliary heat e?uipment in power stations, heat power stations and heating plants General re?uirements and tests
PN M34801-03-1987 Auxiliary heat e?uipment in power stations, heat power stations and heating plants ~ Reduction plants, reduction-cool stations and cool stations Requirements and tests
PN T04602-1992 Fixed capacitors for use in electronic equipment. Generic specification. Methods of tests
PN M34801-02-1987 Auxiliary heat e?uipment in power stations, heat power stations and heating plants Heat exchangers Re?uirements and tests
PN E06600-1986 Industrial automatic and measurements Electromagnetic compatibility for equipment General requirements and tests
PN D79637-1985 Cases and cases elements for wts above a 20 000 kg capacity General requirements and methodes of test
PN M34801-05-1988 Auxiliary heat e?uipment in power stations, heat-power stations and heating plants Pumps of heating systems Reauirements and tests
PN D79636-1990 Cases oi' pieces and cases elements capacity over 1000 kg General requirements and methods of test
PN M34801-04-1988 'Auxiliary heat e?uipment in power stations, heat power stations, and heating plants Thermic deaerator of heating systems Re?uirements and tests
PN T80010-1988 Electronic components Fixed capacitors of ceramic dielectric class 2 (ferroelectric capacitors) General re?uirements and tests

SCC

UNE 20543-3:1979 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT. TANTALUM CHIP CAPACITORS. METHODS OF TEST AND GENERAL REQUIREMENTS
AENOR UNE 20543-10:1984 Fixed capacitors for electronic equipment. Multilayer ceramic dielectric chip capacitors. Test methods and general rules.
AENOR UNE 20543-5:1980 Fixed capacitors for electronic equipment. Mica capacitors for direct current with a nominal voltage not exceeding 3,000 V. Test methods and general requirements.
IEC 60384-8:1979 Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, class 1 - Selection of methods of test and general requirements
IEC 60384-9:1979 Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, class 2 - Selection of methods of test and general requirements
UNE 20543-5:1980 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT. FIXED MICA DIELECTRIC DIRECT CURRENT CAPACITORS WITH A RATED VOLTAGE NOT EXCEEDING 3000 V. METHODS OF TEST AND GENERAL REQUIREMENTS
DANSK DS/EN 60512-22-1:2010 Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance
IEC 60384-10:1979 Fixed capacitors for use in electronic equipment - Part 10: Sectional specification: Fixed multilayer ceramic chip capacitors - Selection of methods of test and general requirements
CEI EN 60512-22-1:2011 Connectors for electronic equipment - Tests and measurements Part 22-1: Capacitance tests - Test 22a: Capacitance
BS 7739-1:1994 Voltage detectors-Specification for capacitive type to be used for voltage exceeding 1 kV a.c.
08/30178461 DC BS EN 60512-22-1. Connectors for electronic equipment. Tests and measurements. Part 22-1. Capacitance tests. Test 22a. Capacitance

CZ-CSN

CSN OEG 38 1020-1966 Acceptance tests of power station equipments
CSN 35 4055 Cast.97-1988 Electromechanical components for electronic equipment. Capacitance tests
CSN 35 8291 Cast.1-1985 Fixed capacitors for use in electronic equipment. Part 1: Generic specification
CSN 35 8291 Cast.15-3-1987 Fixed capacitors for use in electronic equipment Part 15: Blank detail specification: Fixed tantalum capacitors with solid electrolyte and porous anode Assessment level: E
CSN 51 1003-1983 Motor-operated and electro-ther- al appliances for catering in- títutions. eneral technical requirements or safety and methods of tests
CSN IEC 150:1993 Testing and calibration of ultrasonic therapeutic equipment
CSN 35 9751-1975 Locks and keys for securing electric distribution equipment of transformer stations and UHV and HV substations

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 323-1983 Qualifying class 1E equipment for nuclear power generating stations
IEEE 934-1987 Requirements for replacement parts for class 1E equipment in nuclear power generating stations
IEEE 323-2003 Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations
IEEE 323/323a-1974 IEEE Standard for Qualifying Class IE Equipment for Nuclear Power Generating Stations
IEEE Std 323-1974 IEEE Standard for Qualifying Class IE Equipment for Nuclear Power Generating Stations
IEEE Std 323-2003 IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations
IEEE Std 323-1983 IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations
IEEE Std 344-1971 (ANSI N41.7) IEEE Trial-Use Guide for Seismic Qualification of Class I Electric Equipment for Nuclear Power Generating Stations
IEEE 741-1990 Criteria for the protection of class 1E power systems and equipment in nuclear power generating stations
IEEE 741-2007 Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating Stations
IEEE 344-2004 Recommended Practice for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations
IEEE Std C37.82-1987 Qualification of switchgear assemblies for class 1E applications in nuclear power generating stations
IEEE Std C37.82-2017 The Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations
IEEE 344-1987 Recommended practice for seismic qualification of class 1E equipment for nuclear power generating stations
IEEE 494-1974 Method for identification of documents related to class 1E equipment and systems for nuclear power generating stations
IEEE 383-1974 Type test of class 1E electric cables; field splices and connections for nuclear power generating stations
ANSI/IEEE Std 334-1974 IEEE Standard for Type Tests of Continuous Duty Class 1E Motors for Nuclear Power Generating Stations

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 336-1980 Installation@ Inspection@ and Testing Requirements for Class IE Instrumentation and Electric Equipment at Nuclear Power Generating Stations
IEEE C37.105-2010 Qualifying Class 1E Protective Relays and Auxiliaries for Nuclear Power Generating Stations

American National Standards Institute （ANSI)

ANSI/ASHRAE 37-2009 errata 2019 ERRATA SHEET FOR ANSI/ASHRAE STANDARD 37-2009 Methods of Testing for Rating Electrically Driven Unitary Air-Conditioning and Heat Pump Equipment
ANSI/IEEE 323:2003 Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations
ANSI/IEEE 1205:2000 Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Sations
ANSI/IEEE 741:2007 Standard Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating Stations
ANSI/IEEE 344:2004 Recommended Practice for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations

RU-GOST R

GOST R 51317.6.5-2006 Electromagnetic compatibility of technical equipment. Immunity of technical equipment intended for use in power stations and substations. Requirements and test methods
GOST R 50746-2000 Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirements and test methods
GOST R 50746-1995 Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Technical requirements and test methods
GOST R IEC 61513-2011 Nuclear power plants. Instrumentation and control important to safety. General requirements for systems
GOST R 51317.3.12-2006 Electromagnetic compatibility of technical equipment. Limitation of harmonic currents produced by equipment with input current greater than 16A and not greater than 75 A per phase connected to public low-voltage supply systems. Limits and test methods
GOST 27209.0-1989 Electrical thermal equipment. General test methods
GOST R 52459.23-2009 Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 23. Specific requirements for IMT-2000 CDMA direct spread base station, repeater and ancillary equipment
GOST R 52459.8-2009 Electromagnetic compatibility of technical equipment. Radio communication equipment. Part 8. Specific requirements for GSM base stations
GOST R 51837-2001 Electrical thermal equipment. General test methods
GOST IEC 61000-6-5-2017 Electromagnetic compatibility (EMC). Part 6-5. Generic standards. Immunity for equipment used in power station and substation environment

Standard Association of Australia （SAA）

AS 4123.1:2008 Mobile waste containers - Containers with two wheels and a capacity up to 400 L for lifting devices - Dimensions and design
AS/NZS 61000.4.27:2012 Electromagnetic compatibility (EMC) - Testing and measurement technology - Imbalance and immunity testing of equipment with input current not exceeding 16A per phase
AS/NZS 61000.4.14:2012 Electromagnetic compatibility (EMC) Testing and measurement technology Immunity tests to voltage fluctuations for equipment with an input current not exceeding 16 A per phase

IECQ - IEC: Quality Assessment System for Electronic Components

PQC 85-1989 Fixed Capacitors for Use in Electronic Equipment: Sectional Specification: Fixed Chip Capacitors with Thin Film Dielectric; Selection of Methods of Test and General Requirements
PQC 86-1989 Fixed Capacitors for Use in Electronic Equipment: Blank Detail Specification: Fixed Chip Capacitors with Thin Film Dielectric Assessment Level E

United States Navy

NAVY MIL-T-21200 L VALID NOTICE 2-1993 TEST EQUIPMENT FOR USE WITH ELECTRONIC AND ELECTRICAL EQUIPMENT, GENERAL SPECIFICATION FOR
NAVY MIL-T-21200 L-1973 TEST EQUIPMENT FOR USE WITH ELECTRONIC AND ELECTRICAL EQUIPMENT, GENERAL SPECIFICATION FOR
NAVY MIL-T-21200 L NOTICE 1-1977 TEST EQUIPMENT FOR USE WITH ELECTRONIC AND ELECTRICAL EQUIPMENT, GENERAL SPECIFICATION FOR
NAVY MIL-T-21200 L (1)-1999 TEST EQUIPMENT FOR USE WITH ELECTRONIC AND ELECTRICAL EQUIPMENT, GENERAL SPECIFICATION FOR

SAE - SAE International

SAE J919-2009 Sound Measurement Off-Road Work Machines Operator Singular Type
SAE J919-1986 SOUND MEASUREMENT - EARTHMOVING MACHINERY - OPERATOR - SINGULAR TYPE
SAE J919-1966 MEASUREMENT OF SOUND LEVEL AT OPERATOR STATION

Society of Automotive Engineers (SAE)

SAE J919A-1971 SOUND LEVEL MEASUREMENTS AT THE OPERATOR STATION FOR AGRICULTURAL AND CONSTRUCTION EQUIPMENT

Association of German Mechanical Engineers

DVS 2205-2-1996 "Calculation of containers and apparatuses of thermoplastics - Standing round, unpressurized containers"

Japanese Industrial Standards Committee (JISC)

JIS C 5102:1994 Test methods of fixed capacitors for use in electronic equipment

NEMA - National Electrical Manufacturers Association

NEMA LC 1-2007 Test Procedure for Compatibility Of Hearing Aids and Ultrasonic Lighting Control Devices

U.S. Military Regulations and Norms

ARMY MIL-T-13016 E-1977 TEST SET, IGNITION COIL-CAPACITOR-RESISTOR

British Standards Institution (BSI)

BS EN 61000-4-27:2000+A1:2009 Electromagnetic compatibility (EMC). Testing and measurement techniques. Unbalance, immunity test for equipment with input current not exceeding 16 A per phase
BS EN 61000-4-14:1999+A2:2009 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
BS EN 50470-1:2006+A1:2018 Electricity metering equipment (a.c.) - General requirements, tests and test conditions. Metering equipment (class indexes A, B and C)
BS EN 61000-6-5:2015 Electromagnetic compatibility (EMC). Generic standards. Immunity for equipment used in power station and substation environment
PD IEC TR 62271-312:2021 High-voltage switchgear and controlgear. Guidance for the transferability of type tests of high-voltage/low-voltage prefabricated substations
BS EN 62391-1:2006 Fixed electric double-layer capacitors for use in electronic equipment - Part 1: Generic specification
BS IEC/IEEE 62582-1:2012 Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods. General

GOSTR

GOST R 58409-2019 Unpressurized switchgears for rated voltage up to and including 35 kV for railway traction and transformer substations. General specifications
GOST R IEC 61513-2020 Instrumental and control systems important to safety of nuclear power plants. General requirements

Association Francaise de Normalisation

NF C46-908-7-4:2003 Communication networks and systems in substations - Part 7-4 : basic communication structure for substation and feeder equipment - Compatible logical node classes and data classes.
NF EN 60512-22-1:2011 Connectors for electronic equipment - Tests and measurements - Part 22-1: capacitance tests - Test 22a: capacitance
NF F85-011:1991 FIXED RAILWAY EQUIPMENT. STATION EQUIMENT. ELECTRONIC LEFT LUGGAGE LOCKERS.
NF EN 61000-4-27/A1:2009 Electromagnetic compatibility (EMC) - Part 4-27: testing and measurement techniques - Unbalance immunity test for equipment with a current demand not exceeding 16 A per phase
NF C44-470-1/A1*NF EN 50470-1/A1:2018 Electricity metering equipment (a.c.) - Part 1 : general requirements, tests and test conditions - Metering equipment (class indexes A, B and C)
NF EN 61000-4-28/A2:2009 Electromagnetic compatibility (EMC) - Part 4-28: testing and measurement techniques - Immunity test to variation in power frequency for equipment with a current demand not exceeding 16 A per phase

JP-JEM

JEM 1429-2008 Pre-operational testing programs for a.c.power supply systems for nuclear power plants

ES-UNE

UNE-EN 60512-22-1:2010 Connectors for electronic equipment - Tests and measurements -- Part 22-1: Capacitance tests - Test 22a: Capacitance (Endorsed by AENOR in October of 2010.)

Korean Agency for Technology and Standards (KATS)

KS C IEC 62003:2012 Nuclear power plants－Instrumentation and control important to safety－Requirements for electromagnetic compatibility testing
KS C 6492-2004(2020) Test methods of variable capacitors for electronic equipment
KS C 6384-51-2013 Fixed capacitors for use in electronic equipment－Part 5：Blank detail specification：Fixed mica dielectric d.c. capacitor with a rated voltage not exceeding 3000V－Assessment level E
KS C IEC 60384-5-2005(2010) Fixed capacitors for use in electronic equipment－Part 5：Sectional specification：Fixed mica dielectric d.c. capacitor with a rated voltage not exceeding 3 000 V－Selection of methods of test and general

Danish Standards Foundation

DS/EN 60512-22-1:2010 Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance
DS/EN 61000-4-27/A1:2009 Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase
DS/EN 61000-4-14/A2:2009 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
DS/EN 50470-1:2007 Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C)

Canadian Standards Association (CSA)

CAN/CSA-CEI/IEC 61000-4-34:2010 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase (First Edition)
CAN/CSA-CEI/IEC 61000-4-28 AMD 2:2010 Amendment 2 Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase (First Edition)
CAN/CSA-CEI/IEC 61000-4-27 AMD 1:2011 Amendment 1 Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase (First Edition)
CAN/CSA-CEI/IEC 61000-4-14 AMD 2:2010 Amendment 2 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase (First Edition)
CAN/CSA-CEI/IEC 61000-4-34 AMD 1:2010 Amendment 1 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase (First Edition)

AT-ON

ONORM E 1351-1986 Test equipment; jointed test finger

TR-TSE

TS 2229-1976 TESTING AND CALIBRATION OF ULTRASONIC THERAPEUTIC EQUIPMENT

ETSI - European Telecommunications Standards Institute

ETR 151-1995 Equipment Engineering (EE); Electro-Magnetic Compatibility (EMC) Testing of Telecommunication Equipment Above 1 GHz

YU-JUS

JUS N.F2.010-1979 Suspension and coupling equipment for transmission lines, power stations and substations for high voltages. General reguirements

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE V 0681-1-2016 Live working - Devices for operating and testing with nominal voltages exceeding 1 kV - Part 1: General requirements

IEC - International Electrotechnical Commission

IEC 60512-22-1:2010 Connecteurs pour équipements électroniques – Essais et mesures – Partie 22-1: Essais de capacité – Essai 22a: Capacité (Edition 1.0)

German Institute for Standardization

DIN 25450:1990-09 Ultrasonic equipment for manual testing
DIN VDE V 0681-1:2016 Live working - Devices for operating and testing with nominal voltages exceeding 1 kV - Part 1: General requirements
DIN EN 15317:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment English version of DIN EN 15317:2007-05

ZA-SANS

SANS 1825:2005 Gas container test stations - General requirements for periodic inspection and testing of portable and transportable refillable gas containers
NRS 083-2-2009 Electromagnetic compatibility (EMC) in electricity utility networks Part 2: Substation design and equipment installation practices

RO-ASRO

STAS 9902/2-1974 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENTS Methods of test

SE-SIS

SIS SS IEC 398:1989 Industrial electro-heating equipment — General test conditions for electro-heating appliances

AENOR

UNE-EN 61000-4-27:2002 Electromagnetic compatibility (EMC) -- Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current no exceeding 16 A per phase.
UNE 68074:1986 IRRIGATION EQUIPMENT. VOLUMETRIC VALVES. GENERAL REQUIREMENTS AND TEST METHOD

GSO

BH GSO IEC 61000-4-27:2011 Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase
GSO IEC 61000-4-27:2011 Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase
OS GSO IEC 61000-4-27:2011 Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase

European Committee for Electrotechnical Standardization（CENELEC）

EN 60512-22-1:2010 Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance

Lithuanian Standards Office

LST EN 50470-1-2007 Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C)
LST 1744.1-2001/AC-2011 Three-phase dry-type distribution transformers 50 Hz, from 100 to 2500 kVA, with highest voltage for equipment not exceeding 36 kV -- Part 1: General requirements and requirements for transformers with highest voltage for equipment not exceeding 24 kV (HD

International Electrotechnical Commission (IEC)

IEC 60384-5:1993 Fixed capacitors for use in electronic equipment; part 5: sectional specification: fixed mica dielectric d.c. capacitors with a rated voltage not exceeding 3000 V; selection of methods of test and general requirements

Others: Efficient supercapacitor test equipment,Better Supercapacitor Test Equipment,One-stop supercapacitor testing equipment,High-quality supercapacitor test equipment