High-quality supercapacitor test equipment

High-quality supercapacitor test equipment, Total:245 items.

The international standard classification for "High-quality supercapacitor test equipment" includes: Electrical equipment of ships and of marine structures , Ceramic and mica capacitors .

The Chinese standard classification for "High-quality supercapacitor test equipment" includes: Electrical, observation/communication and navigation equipment for vessel in general , Capacitor .

Shandong Provincial Standard of the People's Republic of China

DB37/T 1941-2011 General specifications for supercapacitors used in electronic equipment

Professional Standard - Electricity

DL/T 1715-2017 Ultrasonic testing and classification methods of aluminum and aluminum alloy butt welded joints for electrical power equipment
DL/T 1652-2016 Technical specifications of supercapacitors use in electric energy metering device
DL/T 1694.6-2020 Calibration specification for high voltage testing instruments一Part 6: Very low frequency dielectric loss detector for power cable
DL/T 2603-2023 Energized testing methods for relative dielectric loss factor and capacitance ratio of capacitive equipment
DL/T 2081-2020 Testing code of super capacitor for electrical energy storage

Heilongjiang Provincial Standard of the People's Republic of China

DB23/T 1796-2016 Super capacitor tester technical requirements

工业和信息化部

SJ/T 11582-2016 Test method for electrical performance of power supercapacitors
YD/T 1633-2016 Field test methods for electromagnetic compatibility of telecommunications equipment

Group Standards of the People's Republic of China

T/GAEPA 002-2023 Communication protocols between super charger and electric vehicle
T/CSEE 0032-2017 Relative dielectric loss factor and capacitance ratio live test method of capacitive equipment
T/TBPS 4009-2022 Product?Specification?and?Test?Method?of?Intelligent?Maintenance-free?Super?Capacitor?DC?Power?Supply
T/CESA 1054-2018 Test methods for Porous carbons for electrodes of supercapacitors
T/CITSA 08.3-2021 Test standards for super-capacitor cell and module of railway transportation equipment
T/CESA 1051-2019 Supercapacitor safety specification-Part 2:Test method

Guangdong Provincial Standard of the People's Republic of China

DB4403/T 433-2024 Standards for grading and evaluation of electric vehicle super charging equipment
DB44/T 1498-2014 Double-layer fixed capacitors (supercapacitors) for electrical equipment - Part 1: General specifications

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 6261-1998 Fixed capacitors for use in electronic equipment- Part 5:Sectional specification -Fixed mica dielectric d.c. capacitors with a rated voltage not exceeding 3000 V -Selection of methods o
GB/T 4854.9-2016 Acoustics—Reference zero for the calibration of audiometric equipment—Part 9: Preferred test conditions for the determination of reference hearing threshold levels
GB/T 43527-2023 Electrical installations in ships—Electromagnetic compatibility—Optimising of cable installations on ships—Testing method of routing distance

Professional Standard - Automobile

QC/T 925-2013 Ultracapacitor electric city bus. Engineering approval evaluation program

British Standards Institution (BSI)

BS 2488:1966 Schedule of preferred numbers for the resistance of resistors and the capacitance of capacitors for telecommunication equipment
BS EN 60384-9:2005 Fixed capacitors for use in electronic equipment - Sectional specification: fixed capacitors of ceramic dielectric, Class 2
BS EN 60384-9:2015 Fixed capacitors for use in electronic equipment. Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
BS EN 60384-8-1:2005 Fixed capacitors for use in electronic equipment - Blank detail specification - Fixed capacitors of ceramic dielectric, Class 1. Assessment level EZ
BS EN 61000-4-27:2000+A1:2009 Electromagnetic compatibility (EMC). Testing and measurement techniques. Unbalance, immunity test for equipment with input current not exceeding 16 A per phase
BS EN 60384-8:2015(2017) Fixed capacitors for use in electronic equipment Part 8 : Sectional specification : Fixed capacitors of ceramic dielectric, Class 1
BS EN 60384-22:2012 Fixed capacitors for use in electronic equipment. Sectional specification. Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
BS EN 60384-22:2005 Fixed capacitors for use in electronic equipment. Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
BS EN 61000-4-14:1999+A2:2009 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
BS EN 61881-2:2012 Railway applications. Rolling stock equipment. Capacitors for power electronics. Aluminium electrolytic capacitors with non solid electrolyte
BS EN 60384-8-1:2005(2010) Fixed capacitors for use in electronic equipment — Part 8 - 1 : Blank detail specification : Fixed capacitors of ceramic dielectric, Class 1 — Assessment level EZ
BS EN 60384-22:2004 Fixed capacitors for use in electronic equipment - Part 22: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
22/30453846 DC BS EN 60384-9. Fixed capacitors for use in electronic equipment - Part 9. Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
22/30453842 DC BS EN 60384-8. Fixed capacitors for use in electronic equipment - Part 8. Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
BS EN 60512-22-1:2010 Connectors for electronic equipment. Tests and measurements. Part 22-1: Capacitance tests. Test 22a: Capacitance
BS EN 60384-21-1:2004 Fixed capacitors for use in electronic equipment - Part 21-1: Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 - Assessment level EZ
BS EN 60384-22-1:2004 Fixed capacitors for use in electronic equipment - Part 22-1: Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 - Assessment level EZ
BS EN 60384-22-1:2005 Fixed capacitors for use in electronic equipment - Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2. Assessment level EZ
BS EN 60384-21-1:2005 Fixed capacitors for use in electronic equipment - Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1. Assessment level EZ

Society of Automotive Engineers (SAE)

SAE AMS2636-2012 Ultrasonic Immersion Inspection Titanium and Titanium Alloy Forgings Premium Grade

Korean Agency for Technology and Standards (KATS)

KS C 6384-51-2013 Fixed capacitors for use in electronic equipment－Part 5：Blank detail specification：Fixed mica dielectric d.c. capacitor with a rated voltage not exceeding 3000V－Assessment level E
KS C 6384-9-2001(2016) Fixed capacitors for use in electronic equipment－Part 9：Sectional specification：Fixed capacitors of ceramicdielectric, class 2
KS C 6384-8-2001(2021) Fixed capacitors for use in electronic equipment－Part 8：Sectional specification：Fixed capacitors of ceramic dielectric, class 1
KS C 6384-8-2001(2016) Fixed capacitors for use in electronic equipment－Part 8：Sectional specification：Fixed capacitors of ceramic dielectric, class 1
KS C IEC 60384-9:2021 Fixed capacitors for use in electronic equipment — Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
KS C 6384-9-2001(2021) Fixed capacitors for use in electronic equipment－Part 9：Sectional specification：Fixed capacitors of ceramicdielectric, class 2
KS C IEC 60384-21-2015(2020) Fixed capacitors for use in electronic equipment ― Part21： Sectional specification：Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1
KS C 6492-2004(2020) Test methods of variable capacitors for electronic equipment
KS C IEC 60384-8:2021 Fixed capacitors for use in electronic equipment — Part 8: Sectiona specification: Fixed capacitors of ceramic dielectric, Class 1
KS C 6411-2002(2022) Fixed ceramic capacitors class 1 for use in electronic equipment
KS C 6410-2002(2022) Fixed ceramic capacitors(Class 2) for electronic equipment
KS C 6411-2022 Fixed ceramic capacitors class 1 for use in electronic equipment
KS C IEC 60384-91-2013 Fixed capacitors for use in electronic equipment－Part 9：Blank detail specification：Fixed capacitors of ceramic dielectric, class 2－Assessment level E
KS C IEC 60384-5-2005(2010) Fixed capacitors for use in electronic equipment－Part 5：Sectional specification：Fixed mica dielectric d.c. capacitor with a rated voltage not exceeding 3 000 V－Selection of methods of test and general
KS C IEC 60384-21:2008 Fixed capacitors for use in electronic equipment-Part 2:Blank detail specification:Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors-Assessment level E
KS C IEC 60384-22:2009 Fixed capacitors for use in electronic equipment－Part 22：Sectional specification：Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
KS C IEC 61000-4-14-2010(2017) Electromagnetic compatibility(EMC)－Part 4-14：Testing and measurement techniques－Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
KS C IEC 60384-21:2013 Fixed capacitors for use in electronic equipment-Part 2:Blank detail specification:Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors-Assessment level E
KS R 9194-1996(2016) Testing methods of permissible interference values for track circuit device
KS C IEC 61000-4-14-2022 Electromagnetic compatibility(EMC)－Part 4-14：Testing and measurement techniques－Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
KS C IEC 60384-21-1:2013 Fixed capacitors for use in electronic equipment－Part 21－1：Blank detail specification：Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1－Assessment level EZ
KS C IEC 61000-4-27-2019 Electromagnetic compatibility(EMC) — Part 4－27: Testing and measurement techniques — Unbalance, immunity test for equipment with input current not exceeding 16 A per phase
KS C IEC 60384-22-1:2009 Fixed capacitors for use in electronic equipment-Part 22-1:Blank detail specification:Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2-Assessment level EZ
KS C IEC 60384-22-1:2013 Fixed capacitors for use in electronic equipment－Part 22－1：Blank detail specification：Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2－Assessment level EZ
KS C IEC 60384-21-1:2009 Fixed capacitors for use in electronic equipment-Part 21-1:Blank detail specification:Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1-Assessment level EZ

CZ-CSN

CSN 35 4055 Cast.97-1988 Electromechanical components for electronic equipment. Capacitance tests
CSN 33 4000-1987 Electric-engineering rules. Requirements for communication equipment resistibility against overvoltage and overcurrent
CSN IEC 150:1993 Testing and calibration of ultrasonic therapeutic equipment
CSN 35 8291 Cast.4-1-1988 Fidex capacitors for use in electronic equipment Part 4: Blank detail specification: Aluminium electrolytic capacitors with non-solid electrolyte Assessment level E

HU-MSZT

MSZ 6016-1.lap-1958 Template temperature measurement equipment. Premium size
MNOSZ 11200-1953 Measure device content level and name

SCC

IEC 60384-8:1979 Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, class 1 - Selection of methods of test and general requirements
IEC 60384-9:1979 Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, class 2 - Selection of methods of test and general requirements
UNE 20543-5:1980 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT. FIXED MICA DIELECTRIC DIRECT CURRENT CAPACITORS WITH A RATED VOLTAGE NOT EXCEEDING 3000 V. METHODS OF TEST AND GENERAL REQUIREMENTS
BS 2488:1954 Preferred values and associated tolerances for resistors & capacitors for telecommunication equipment
DANSK DS/EN 60512-22-1:2010 Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance
CEI EN 60384-9:2016 Fixed capacitors for use in electronic equipment Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
DANSK DS/EN 60384-8/AC:2015 Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
CEI EN 60384-8:2016 Fixed capacitors for use in electronic equipment Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
CEI EN 60512-22-1:2011 Connectors for electronic equipment - Tests and measurements Part 22-1: Capacitance tests - Test 22a: Capacitance
CEI EN 60384-8/EC:2016 Fixed capacitors for use in electronic equipment Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
DANSK DS/EN 60384-9:2015 Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
DANSK DS/EN 60384-8:2005 Fixed capacitors for use in electronic equipment – Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
BS QC 300601:1993 Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed capacitors of ceramic dielectric, class 1. Assessment level E
CEI EN 60384-9-1:2005 Fixed capacitors for use in electronic equipment Part 9-1: Blank detail specification - Fixed capacitors of ceramic dielectric, Class 2 - Assessment level EZ
DANSK DS/EN 60384-9-1:2005 Fixed capacitors for use in electronic equipment - Part 9-1: Blank detail specification: Fixed capacitors of ceramic dielectric, Class 2 - Assessment level EZ
AENOR UNE 20543-10:1984 Fixed capacitors for electronic equipment. Multilayer ceramic dielectric chip capacitors. Test methods and general rules.
AENOR UNE 20543-5:1980 Fixed capacitors for electronic equipment. Mica capacitors for direct current with a nominal voltage not exceeding 3,000 V. Test methods and general requirements.
IEC 60384-8:1988/AMD1:1993 Amendment 1 - Fixed capacitors for use in electronic equipment. Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
08/30178461 DC BS EN 60512-22-1. Connectors for electronic equipment. Tests and measurements. Part 22-1. Capacitance tests. Test 22a. Capacitance
DIN IEC 60384-5-1:1994 Fixed capacitors for use in electronic equipment; part 5: blank detail specification: fixed mica dielectric d.c. capacitors with a rated voltage not exceeding 3000 V; assessment level E; identical with IEC 60384-5-1:1993
IEC 60384-8-1:1988/AMD2:2000 Amendment 2 - Fixed capacitors for use in electronic equipment. Part 8-1: Blank detail specification: Fixed capacitors of ceramic dielectric, class 1. Assessment level E
IEC 60384-8-1:1988/AMD1:1993 Amendment 1 - Fixed capacitors for use in electronic equipment. Part 8: Blank detail specification: Fixed capacitors of ceramic dielectric, class 1. Assessment level E
IEC 60384-9:1988/AMD1:2000 Amendment 1 - Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
IEC 60384-9-1:1988/COR1:1999 Corrigendum 1 - Fixed capacitors for use in electronic equipment. Part 9: Blank detail specification: Fixed capacitors of ceramic dielectric, class 2. Assessment level E
DIN IEC 60384-5:1994 Fixed capacitors for use in electronic equipment; part 5: sectional specification: fixed mica dielectric d.c. capacitors with a rated voltage not exceeding 3000 V; selection of methods of test general requirements; identical with IEC 60384-5:1993
BS 2133A-1:1960 Ceramic dielectric capacitors Grade 1 for use in telecommunication and allied electronic equipment
BS 2133B-1:1961 Ceramic dielectric capacitors, GradeII for use in telecommunication and allied electronic equipment
DIN IEC 60512-22-1 E:2008 Draft Document - Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance (IEC 48B/1868/CD:2008)
CEI EN IEC 60384-22:2019 Fixed capacitors for use in electronic equipment Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
CEI EN IEC 60384-21:2019 Fixed capacitors for use in electronic equipment Part 21: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1
DANSK DS/EN 60384-21:2012 Fixed capacitors for use in electronic equipment – Part 21: Sectional specification – Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1

Association Francaise de Normalisation

NF Z84-489-33:2010 Electromagnetic compatibility and Radio spectrum Matters (ERM) - ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part 33 : specific conditions for Ultra Wide Band (UWB) communications devices (V1.1.1).
NF C74-337:1987 Medical electrical equipment - Ultrasound equipment for diagnostic Guide for the quality follow-up of ultrasonographic installations
C74-337:1987 Medical electrical equipment. Ultrasound equipment for diagnostic. Guide for the quality follow-up of ultrasonographic installations.
NF EN 60512-22-1:2011 Connectors for electronic equipment - Tests and measurements - Part 22-1: capacitance tests - Test 22a: capacitance
NF C93-112-8*NF EN 60384-8:2015 Fixed capacitors for use in electronic equipment - Part 8 : sectional specification : fixed capacitors of ceramic dielectric, Class 1
NF C93-112-9*NF EN 60384-9:2005 Fixed capacitors for use in electronic equipment - Part 9 : sectional specification : fixed capacitors of ceramic dielectric, Class 2
NF C93-012:1974 Components for electronic equipment. Preferred diameters of wire terminations of capacitors and resistors.
NF C93-112-9*NF EN 60384-9:2015 Fixed capacitors for use in electronic equipment - Part 9 : sectional specification : fixed capacitors of ceramic dielectric, Class 2
NF C93-112-8*NF EN 60384-8:2005 Fixed capacitors for use in electronic equipment - Part 8 : sectional specification : fixed capacitors of ceramic dielectric, Class 1
NF EN 61000-4-27/A1:2009 Electromagnetic compatibility (EMC) - Part 4-27: testing and measurement techniques - Unbalance immunity test for equipment with a current demand not exceeding 16 A per phase
NF C93-112-8-1*NF EN 60384-8-1:2005 Fixed capacitors for use in electronic equipment - Part 8-1 : blank detail specification : fixed capacitors of ceramic dielectric, Class 1 - Assessment level EZ
NF C93-112-9-1*NF EN 60384-9-1:2005 Fixed capacitors for use in electronic equipment - Part 9-1 : blank detail specification : fixed capacitors of ceramic dielectric, Class 2 - Assessment level EZ
NF EN 61000-4-28/A2:2009 Electromagnetic compatibility (EMC) - Part 4-28: testing and measurement techniques - Immunity test to variation in power frequency for equipment with a current demand not exceeding 16 A per phase
NF C93-112-21:2012 Fixed capacitors for use in electronic equipment - Part 21: sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1
NF C93-112-22:2012 Fixed capacitors for use in electronic equipment - Part 22: sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
NF C93-112-21:2005 Fixed capacitors for use in electronic equipment - Part 21 : sectional specification : fixed surface mount multilayer capacitors of ceramic dielectric, Class 1.
NF C93-112-22:2005 Fixed capacitors for use in electronic equipment - Part 22 : sectional specification : fixed surface mount multilayer capacitors of ceramic dielectric, Class 2.
NF EN 60384-21-1:2005 Condensateurs fixes utilisés dans les équipements électroniques - Partie 21-1 : spécification particulière cadre : condensateurs multicouches fixes pour montage en surface pour diélectriques en céramique, classe 1 - Niveau d'évaluation EZ
NF F66-881-2*NF EN 61881-2:2013 Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 2 : aluminium electrolytic capacitors with non solid electrolyte
NF A09-324*NF EN 15317:2013 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
NF E86-030:1978 Not pressurized horizontal tanks. Positions of supports for the preferential series.
NF C93-400-22-1*NF EN 60512-22-1:2011 Connectors for electronic equipment - Tests and measurements - Part 22-1 : capacitance tests - Test 22a : capacitance.
NF C93-112-21-1*NF EN 60384-21-1:2005 Fixed capacitors for use in electronic equipment - Part 21-1 : blank detail specification : fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 - Assessment level EZ
NF EN 61000-4-34/A1:2009 Electromagnetic compatibility (EMC) - Part 4-34: testing and measurement techniques - Immunity tests against voltage dips, brief interruptions and voltage variations for equipment with a supply current of more than 16 A per phase
NF C93-112-22-1*NF EN 60384-22-1:2005 Fixed capacitors for use in electronic equipment - Part 22-1 : blank detail specification : fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 - Assessment level EZ

U.S. Military Regulations and Norms

ARMY MIL-T-13016 E-1977 TEST SET, IGNITION COIL-CAPACITOR-RESISTOR

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 1312-1993 Standard Preferred Voltage Ratings for Alternating-Current Electrical Systems and Equipment Operating at Voltages Above 230 kV Nominal

NEMA - National Electrical Manufacturers Association

NEMA LC 1-2007 Test Procedure for Compatibility Of Hearing Aids and Ultrasonic Lighting Control Devices

RU-GOST R

GOST R 50292-1992 Fixed capacitors for use in electronic equipment. Part 8. Sectional specification. Fixed capacitors of ceramic dielectric class 1
GOST R 50294-1992 Fixed capacitors for use in electronic equipment. Part 9. Sectional specifications: fixed capacitors of ceramic dielectric, class 2
GOST R 50293-1992 Fixed capacitors for use in electronic equipment. Part 8. Blank detail specification. Fixed capacitors of ceramic dielectric, class 1. Assessment level E
GOST 30804.4.30-2013 Electric energy. Electromagnetic compatibility of technical equipment. Power quality measurement methods
GOST R 50295-1992 Fixed capacitors for use in electronic equipment. Part 9. Blank detail specification: fixed capacitors of ceramic dielectric, class 2. Assessment level E
GOST R 56327-2014 Medical electrical equipment. Ultrasonic equipment of expert class. Technical requirements for governmental purchases
GOST R 51317.3.12-2006 Electromagnetic compatibility of technical equipment. Limitation of harmonic currents produced by equipment with input current greater than 16A and not greater than 75 A per phase connected to public low-voltage supply systems. Limits and test methods
GOST R ISO 16831-2016 Non-destructive testing. Ultrasonic testing. Characterization and verification of ultrasonic thickness measuring equipment
GOST R 51317.4.1-2000 Electromagnetic compatibility of technical equipment. Immunity tests. Overview of the test
GOST R 51857-2001 Electromagnetic compatibility of technical equipment. On-site paging equipment. Requirements and test methods

International Electrotechnical Commission (IEC)

IEC 60384-9:2005 Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
IEC 60384-9:2015 Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
IEC 60384-8:2015 Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
IEC 60384-8:2005 Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
IEC 60384-8-1:2005 Fixed capacitors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed capacitors of ceramic dielectric, Class 1 - Assessment level EZ
IEC 60384-9-1:2005 Fixed capacitors for use in electronic equipment - Part 9-1: Blank detail specification: Fixed capacitors of ceramic dielectric, Class 2 - Assessment level EZ
IEC 60384-21:2004 Fixed capacitors for use in electronic equipment - Part 21: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, class 1
IEC 60384-22:2004 Fixed capacitors for use in electronic equipment - Part 22: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, class 2
IEC 60384-21:2011 Fixed capacitors for use in electronic equipment - Part 21: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1
IEC 60384-22:2011 Fixed capacitors for use in electronic equipment - Part 22: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
IEC 61881-2:2012 Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 2: Aluminium electrolytic capacitors with non-solid electrolyte
IEC 61000-4-14:1999+AMD1:2001+AMD2:2009 CSV Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
IEC 60384-4-2:2007 Fixed capacitors for use in electronic equipment - Part 4-2: Blank detail specification - Fixed aluminium electrolytic capacitors with solid (MnO<(Index)2>) electrolyte - Assessment level EZ
IEC 60384-4-1:2007 Fixed capacitors for use in electronic equipment - Part 4-1: Blank detail specification - Fixed aluminium electrolytic capacitors with non-solid electrolyte - Assessment level EZ
IEC 60384-22-1:2004 Fixed capacitors for use in electronic equipment - Part 22-1: Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 - Assessment level EZ

CN-QIYE

Q/GDW 1895-2013 Guidelines for field application of dielectric dissipation factor and capacitance live test technology for capacitive equipment

ES-UNE

UNE-EN 60384-8:2015 Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1 (Endorsed by AENOR in June of 2015.)
UNE-EN 60384-9:2015 Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2 (Endorsed by AENOR in June of 2015.)
UNE-EN 60512-22-1:2010 Connectors for electronic equipment - Tests and measurements -- Part 22-1: Capacitance tests - Test 22a: Capacitance (Endorsed by AENOR in October of 2010.)
UNE-EN 60384-8:2015/AC:2017-09 Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1 (Endorsed by Asociación Española de Normalización in November of 2017.)
UNE-EN 60384-9-1:2005 Fixed capacitors for use in electronic equipment -- Part 9-1: Blank detail specification: Fixed capacitors of ceramic dielectric, Class 2 - Assessment level EZ (Endorsed by AENOR in September of 2005.)
UNE-EN 60384-8-1:2005 Fixed capacitors for use in electronic equipment -- Part 8-1: Blank detail specification: Fixed capacitors of ceramic dielectric, Class 1 - Assessment level EZ (Endorsed by AENOR in September of 2005.)
UNE-EN IEC 60384-22:2019 Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 (Endorsed by Asociación Española de Normalización in May of 2019.)

GSO

OS GSO IEC 60384-8:2014 Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
OS GSO IEC 60384-9:2014 Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
BH GSO IEC 61000-4-27:2011 Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase
GSO IEC 61000-4-27:2011 Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase
OS GSO IEC 61000-4-27:2011 Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase
OS GSO IEC 60384-9-1:2014 Fixed capacitors for use in electronic equipment - Part 9-1: Blank detail specification: Fixed capacitors of ceramic dielectric, Class 2 - Assessment level EZ
GSO IEC 60384-3-1:2014 Fixed capacitors for use in electronic equipment - Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ
OS GSO IEC 60384-22:2014 Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2

Japanese Industrial Standards Committee (JISC)

JIS C 5101-8:2008 Fixed capacitors for use in electronic equipment -- Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
JIS C 5101-8:2018 Fixed capacitors for use in electronic equipment -- Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
JIS C 5101-9:2018 Fixed capacitors for use in electronic equipment -- Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
JIS C 5101-9:2008 Fixed capacitors for use in electronic equipment -- Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
JIS C 5101-9:1998 Fixed capacitors for use in electronic equipment Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, class 2
JIS C 5101-8:1998 Fixed capacitors for use in electronic equipment Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, class 1
JIS C 5101-9-1:1998 Fixed capacitors for use in electronic equipment Part 9: Blank detail specification: Fixed capacitors of ceramic dielectric, class 2 Assessment level E
JIS C 5101-8-1:1998 Fixed capacitors for use in electronic equipment Part 8: Blank detail specification: Fixed capacitors of ceramic dielectric, class 1 Assessment level E
JIS C 5101-8-1:2008 Fixed capacitors for use in electronic equipment -- Part 8-1: Blank detail specification: Fixed capacitors of ceramic dielectric, Class 1 Assessment level EZ
JIS C 5101-9-1:2008 Fixed capacitors for use in electronic equipment -- Part 9-1: Blank detail specification: Fixed capacitors of ceramic dielectric, Class 2 Assessment level EZ
JIS C 5101-4-2:1998 Fixed capacitors for use in electronic equipment Part 4: Blank detail specification: Aluminium electrolytic capacitors with solid electrolyte Assessment level E
JIS C 5101-21:2014 Fixed capacitors for use in electronic equipment -- Part 21: Sectional specification -- Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1
JIS C 5101-4-1:1998 Fixed capacitors for use in electronic equipment Part 4: Blank detail specification: Aluminium electrolytic capacitors with non-solid electrolyte Assessment level E
JIS C 5101-21:2006 Fixed capacitors for use in electronic equipment -- Part 21: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class1
JIS C 5101-22:2006 Fixed capacitors for use in electronic equipment -- Part 22: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
JIS C 5101-22:2014 Fixed capacitors for use in electronic equipment -- Part 22: Sectional specification -- Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
JIS C 5402-22-1:2016 Connectors for electronic equipment -- Tests and measurements -- Part 22-1: Capacitance tests -- Test 22a: Capacitance
JIS C 0920:1993 Tests to prove protection against ingress of water and degrees of protection against ingress of solid objects for electrical equipment
JIS C 6462:1996 Test methods of variable capacitors for use in electronic equipment
JIS C 5101-22-1:2006 Fixed capacitors for use in electronic equipment -- Part 22-1: Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 -- Assessment level EZ

KR-KS

KS C IEC 60384-9-2021 Fixed capacitors for use in electronic equipment — Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
KS C IEC 60384-8-2021 Fixed capacitors for use in electronic equipment — Part 8: Sectiona specification: Fixed capacitors of ceramic dielectric, Class 1

German Institute for Standardization

DIN EN 60384-8 Berichtigung 1:2018-02 Fixed capacitors for use in electronic equipment - Part 8: Sectional specification - Fixed capacitors of ceramic dielectric, Class 1 (IEC 60384-8:2015/COR1:2017); German version EN 60384-8:2015/AC:2017-09
DIN EN 60384-9:2015-12 Fixed capacitors for use in electronic equipment - Part 9: Sectional specification - Fixed capacitors of ceramic dielectric, Class 2 (IEC 60384-9:2015); German version EN 60384-9:2015 / Note: DIN EN 60384-9 (2006-01) remains valid alongside this standa...
DIN EN 60384-8:2015-12 Fixed capacitors for use in electronic equipment - Part 8: Sectional specification - Fixed capacitors of ceramic dielectric, Class 1 (IEC 60384-8:2015); German version EN 60384-8:2015 / Note: DIN EN 60384-8 (2006-01) remains valid alongside this standa...
DIN 25450:1990-09 Ultrasonic equipment for manual testing
DIN EN 60384-9-1:2006-01 Fixed capacitors for use in electronic equipment - Part 9-1: Blank detail specification - Fixed capacitors of ceramic dielectric, Class 2 - Assessment level EZ (IEC 60384-9-1:2005); German version EN 60384-9-1:2005 / Note: DIN 45910-171 (1991-05) and D...
DIN EN 15317:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment English version of DIN EN 15317:2007-05
DIN 25450:1990 Ultrasonic equipment for manual testing
DIN EN 60384-22-1:2005 Fixed capacitors for use in electronic equipment - Part 22-1: Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 - Assessment level EZ (IEC 60384-22-1:2004 + Corrigendum 2004); German version EN 60384-22-1
DIN EN 60384-21-1:2005 Fixed capacitors for use in electronic equipment - Part 21-1: Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 - Assessment level EZ (IEC 60384-21-1:2004 + Corrigendum 2004); German version EN 60384-21-1

Danish Standards Foundation

DS/EN 60512-22-1:2010 Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance
DS/EN 61000-4-27/A1:2009 Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase
DS/EN 61000-4-14/A2:2009 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
DS/EN 61000-4-28/A2:2009 Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase

TR-TSE

TS 2229-1976 TESTING AND CALIBRATION OF ULTRASONIC THERAPEUTIC EQUIPMENT

ETSI - European Telecommunications Standards Institute

ETR 151-1995 Equipment Engineering (EE); Electro-Magnetic Compatibility (EMC) Testing of Telecommunication Equipment Above 1 GHz

IEC - International Electrotechnical Commission

IEC 60512-22-1:2010 Connecteurs pour équipements électroniques – Essais et mesures – Partie 22-1: Essais de capacité – Essai 22a: Capacité (Edition 1.0)

RO-ASRO

STAS 9902/2-1974 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENTS Methods of test
STAS CEI 384-4-1-1992 Fixed capacitors for use in electronic equipment. Part 4: Blank detail specification: Aluminium electrolytic capacitors with non-solid electrolyt. Assesment level E

IECQ - IEC: Quality Assessment System for Electronic Components

PQC 86-1989 Fixed Capacitors for Use in Electronic Equipment: Blank Detail Specification: Fixed Chip Capacitors with Thin Film Dielectric Assessment Level E
QC 300601/US 0003-1988 Fixed Capacitors for Use in Electronic Equipment: Detail Specification: Fixed Capacitors of Ceramic Dielectric@ Class 1@ Assessment Level E
PQC 85-1989 Fixed Capacitors for Use in Electronic Equipment: Sectional Specification: Fixed Chip Capacitors with Thin Film Dielectric; Selection of Methods of Test and General Requirements
QC 300701/ JP 0001-1989 Fixed Capacitors for Use in Equipment Part 9: Detail Specification: Fixed Capacitors of Ceramic Dielectric@ Class 2 Assessment Level E
QC 300601/JP 0001-1989 Fixed Capacitors for Use in Equipment Part 8: Detail Specification: Fixed Capacitors of Ceramic Dielectric@ Class 1 Assessment Level E
QC 300701/ KR 0001-1991 Fixed Capacitors for Use in Electronic Equipment Part 9: Detail Specification: Fixed Capacitors of Ceramic Dielectric@ Class 2 Assessment Level E
PQC 6-1994 Fixed Capacitors for Use in Electronic Equipment Blank Detail Specification: Fixed Capacitors of Glass-Ceramic Dielectric@ Class 1 Assessment Level E
QC 300701/ JP 0004-1991 Fixed Capacitors for Use in Electronic Equipment Part 9: Detail Specification: Fixed Capacitors of Ceramic Dielectric@ Class 2 Assessment Level E
QC 300701/ SG 0001-1989 Fixed Capacitors for Use in Electronic Equipment Part 9: Detail Specification: Fixed Capacitors of Ceramic Dielectric@ Class 2 Assessment Level E

Standard Association of Australia （SAA）

AS/NZS 61000.4.27:2012 Electromagnetic compatibility (EMC) - Testing and measurement technology - Imbalance and immunity testing of equipment with input current not exceeding 16A per phase
AS/NZS 61000.4.14:2012 Electromagnetic compatibility (EMC) Testing and measurement technology Immunity tests to voltage fluctuations for equipment with an input current not exceeding 16 A per phase
AS/NZS 61000.4.34:2012 Electromagnetic compatibility (EMC), Part 4.34: Testing and measurements techniques — Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase

AENOR

UNE-EN 61000-4-27:2002 Electromagnetic compatibility (EMC) -- Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current no exceeding 16 A per phase.
UNE-EN 61000-4-14:2001 Electromagnetic compatibility (EMC) -- Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16A per phase.
UNE-EN 61000-4-14:2001/A1:2005 Electromagnetic compatibility (EMC) -- Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16A per phase.
UNE-EN 61000-4-14:2001/A2:2010 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phaseCompatibilité électromagnétique (CEM) - Partie 4-14: Techniques d'essai et

European Committee for Electrotechnical Standardization（CENELEC）

EN 60384-21:2012 Fixed capacitors for use in electronic equipment - Part 21: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1
EN 60384-9-1:2005 Fixed capacitors for use in electronic equipment Part 9-1: Blank detail specification: Fixed capacitors of ceramic dielectric, Class 2 Assessment level EZ
EN 60512-22-1:2010 Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance
EN 60384-22:2012 Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2

CENELEC - European Committee for Electrotechnical Standardization

EN 60384-21:2004 Fixed capacitors for use in electronic equipment Part 21: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric@ Class 1
EN 60384-22:2004 Fixed capacitors for use in electronic equipment Part 22: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric@ Class 2

PL-PKN

PN T80010-1988 Electronic components Fixed capacitors of ceramic dielectric class 2 (ferroelectric capacitors) General re?uirements and tests
PN T80004-1988 Electronic components Fixed capacitors of ceramic dielectric class 1 General re?uirements and tests
PN T05123-1986 Electromechanical components for electronic e?uipment; basie testing procedures and measuring methods Current-carrying capacity tests

JP-JEITA

JEITA RC 2365B-2007 Fixed capacitors for use in electronic equipment- Detail specification (guidance): Fixed aluminium electrolytic capacitors with non-solid electrolyte for use in electronic flash equipment Assessment level EZ

YU-JUS

JUS N.R2.628-1994 Fixed capacitors for use in electronic equipment - Fixed tantalum capacitors with solid electrolite and porous anode - Class 2: Climatic category 55/85/21 -Assessment level E - Detail specification

IN-BIS

IS 11626-1986 Recommended practices for ultrasonic testing and acceptance of forged high-quality large square steel

Lithuanian Standards Office

LST EN 60512-22-1-2010 Connectors for electronic equipment - Tests and measurements -- Part 22-1: Capacitance tests - Test 22a: Capacitance (IEC 60512-22-1:2010)
LST EN 61000-4-14-2001 Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase (IEC 61000-4-14:1999)

European Telecommunications Standards Institute (ETSI)

ETSI ETR 151-1995 Equipment Engineering (EE); Electro-Magnetic Compatibility (EMC) Testing of Telecommunication Equipment Above 1 GHz

VN-TCVN

TCVN 1272-1986 Reagents and super pura chemicals.Complexometric method for determination of basic matters content

American National Standards Institute （ANSI)

ANSI/ASHRAE 204-2020 ANSI/ASHRAE Standard 204-2020 Method of Test for Rating Micro Combined Heat and Power Devices

Others: Efficient supercapacitor test equipment,Better Supercapacitor Test Equipment,One-stop supercapacitor testing equipment,High-quality supercapacitor test equipment