Detection cell fluctuation

Detection cell fluctuation, Total:455 items.

The international standard classification for "Detection cell fluctuation" includes: Equipment for petroleum and natural gas industries in general , Equipment for petroleum and natural gas industries , Exploratory and extraction equipment , Electric road vehicles , Acoustics and acoustic measurements , Non-destructive testing , Valves in general , Integrated circuits. Microelectronics .

The Chinese standard classification for "Detection cell fluctuation" includes: Petroleum drilling & production equipment and instrument , Petroleum exploration, development, gathering and transportation equipment in general , Petroleum geology exploration , New energy vehicle and other automobiles , Acoustic Measurement , Radio Measurement , Length Measurement , Basic standards and general methods , Valve , Microcircuit in general .

Group Standards of the People's Republic of China

T/GDBIA 01-2023 Regulations of electric bicycle battery rapid testing
T/CITS 0021-2023 New energy traction battery air impermeability inspection equipment
T/SEIA 001-2020 General technical requirements and test method of electric bicycles-cell or battery
T/CIET 228-2023 Detection methods for retired lithium batteries
T/CIAPS 0018-2022 Composition Detection Method and Toxicity Classification of Traction Battery Thermal Runaway Leakage
T/CASME 1489-2024 Liquid flow energy storage battery bellow
T/FSYY 0050-2021 Retired traction battery echelon use — Test methods of residual capacity
T/DZJN 168-2023 Calculation and detection method of recovery rate of valuable metals in waste power batteries
T/GDMES 0042-2023 Technical specification for testing system for high-voltage power batteries
T/GERS 0001-2020 Test method of critical control points in the production of lithium-ion traction battery
T/CAQI 329-2023 Electric vehicle traction battery testing service specification
T/CBHA 001-2022 Examing & assessment specification for EV batterries
T/CES 063-2021 Technical specification of retired power battery for screening detection
T/SZBIA 0001-2023 Technical specifications for direct cooling and direct heating test bench for testing thermal management performance of power batteries
T/CSTM 00666-2023 Non-destructive testing –Steel products –Ultrasonic testing method for steel ingot
T/GDC 172-2022 Lifewave health parameter detector
T/DZJN 38-2021 Technical guide for residual energy detection and residual value evaluation of decommissioned power battery modules
T/IAC 49-2023 Guidelines for Inspection and Damage Assessment of Power Battery in The NEVs Insurance Accidents

Professional Standard - Petroleum

SY/T 6639-2005 The calibration method of geophone tester
SY/T 7081-2016 Calibrating method for calibration device of geophone tester
SY 7081-2016 Calibration method of calibration device of geophone tester
SY/T 6639-2012 Calibration Method for Geophone Tester
SY/T 5046.1-2000 Geophone. Part 1: Moving coil geophone
SY 6639-2012 Geophone Tester Calibration Method
SY/T 5046.4-2002 Geophone - Part 4:Moving acceleration geophone

中国石油天然气总公司

SY/T 5046.1-1996 Geophones Part 1: Moving coil geophones

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34015-2017 Recycling of traction battery used in electric vehicle--Test of residual capacity

国家能源局

NB/T 33024-2016 Test specification for lithium-ion traction battery of Electric Vehicles

National Metrological Verification Regulations of the People's Republic of China

JJG 928-1998 Verification Regulation of Ultrasonic Ranger
JJG(石油) 21-1996 Verfication Regulation of Geophone Tester
JJG 990-2004 Verification Regulation for Acoustic Detector
JJG 281-1981 Verification Regulation of Coaxial Thin Film Thermoelectric
JJG 403-1986 Verification Regulation of Ultrasonic Thickness Gauge
JJG(海洋) 05-2003 Verification Regulations for Acoustic Wave Meter

未注明发布机构

DIN EN 583-1 Non-destructive testing - Ultrasonic examination - Part 1: General principles
DIN EN ISO 23243 E:2018-11 Non-destructive testing array ultrasonic testing vocabulary (draft)
JIS G 0589:2024 Automated full peripheral ultrasonic thickness examination of steel pipes and tubes
DIN EN ISO 23864 E:2021-09 Non-destructive testing of welds using ultrasonic testing using automatic total focusing technology (TFM) and related technologies (draft)
DIN EN 15317 E:2013-04 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
DIN EN ISO 16809 E:2018-12 Non-destructive testing ultrasonic thickness measurement (draft)
DIN EN ISO 16810 E:2013-08 General principles of non-destructive testing and ultrasonic testing (draft)

Guangdong Provincial Standard of the People's Republic of China

DB4403/T 20-2019 Detection method of electric vehicle on-board lithium-ion power battery system
DB44/T 1192-2013 Harmonic interference limits and detection methods of charging equipment for electric vehicles

Professional Standard - Machinery

JB/T 11604-2013 Non-destructive testing instruments — Ultrasonic thickness gauge
JB/T 10814-2007 Non-destructive testing - Ultrasonic testing by surface wave
JB/T 6903-2008 Methods for ultrasonic examination of steel gorgings for valves

Anhui Provincial Standard of the People's Republic of China

DB34/T 1974-2013 Rules for Ultrasonic Testing of Drive Axles of Cableways in Service
DB34/T 1974-2018 Rules for Ultrasonic Testing of Drive Axles of Cableways in Service

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 31211.1-2024 Non-destructive testing—Ultrasonic guided-wave testing—Part 1: General principle
GB/T 23904-2009 Non-destructive testing—Test method for ultrasonic testing by surface wave
GB/T 42972-2023 Microwave circuits—Test methods for detector
GB/T 23905-2009(英文版) Non destructive testing Blocks for ultrasonic testing
GB/T 31211-2014 Non-destructive testing―Ultrasonic guided wave testing―General principle
GB/T 43480-2023 Non-destructive testing—Guided wave testing of ultrasonic phased array cylindrical imaging
GB/T 28704-2012 Non-destructive testing—Test method for ultrasonic guided wave testing based on magnetostrictive effects

Military Standard of the People's Republic of China-General Armament Department

GJB 593.1-1988 Non-destructive testing quality control specifications Ultrasonic longitudinal and transverse wave inspection

Taiwan Provincial Standard of the People's Republic of China

CNS 13342-1994 Glossary of Terms Related to Nondestructive Testing (Ultrasonic Testing Terms)
CNS 14136-1998 Method of ultrasonic test for steel forgings
CNS 14138-1998 Method of ultrasonic test for titanium pipes and tubes
CNS 11224-1991 Evaluation Characteristics of Pulse Echo Ultrasonic Testing System

未注明发布机构

DIN EN 15317 E:2013-04 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
DIN EN 583-1 Non-destructive testing - Ultrasonic examination - Part 1: General principles
DIN EN ISO 16810 E:2013-08 General principles of non-destructive testing and ultrasonic testing (draft)
DIN EN ISO 23864 E:2021-09 Non-destructive testing of welds using ultrasonic testing using automatic total focusing technology (TFM) and related technologies (draft)
DIN EN ISO 16809 E:2018-12 Non-destructive testing ultrasonic thickness measurement (draft)
DIN EN ISO 23243 E:2018-11 Non-destructive testing array ultrasonic testing vocabulary (draft)
JIS G 0589:2024 Automated full peripheral ultrasonic thickness examination of steel pipes and tubes

工业和信息化部

YS/T 1103-2016 Ultrasonic (transverse wave) detection method for copper and copper alloy pipes
JB/T 4008-2020 Non-destructive testing-test method for ultrasonic testing and evaluation of discontinuities by immersed pulse-echo longitudeinal waves
JB/T 4009-2020 Non-destructive testing-test method for ultrasonic testing and evaluation of discontinuities by contact pulse-echo longitudeinal waves

Professional Standard - Construction Industry

JG/T 5004-1992 Ultrasonic concrete tester

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38952-2020 Non-destructive testing—Testing method for measuring residual stress using bulk wave
GB/T 34370.11-2020 Nondestructive testing of amusement equipments—Part 11:Ultrasonic guided wave testing

Professional Standard - Aerospace

QJ 20048-2011 Ultrasonic testing method for turbine disc of liquid rocket engine

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 4380-2022 Technical requirements and on-site testing methods for lithium-ion power battery systems of electric vehicles in operation

Sichuan Provincial Standard of the People's Republic of China

DB51/T 2191-2016 General testing method for vanadium redox flow battery

Indonesia Standards

SNI ISO 16823:2014 Non-destructive testing-ultrasonic testing-transmission engineering
SNI ISO 16810:2014 General principles of nondestructive testing and ultrasonic testing
SNI ISO 2400:2014 Non-destructive testing - Ultrasonic testing -Specification for calibration block No.1
SNI ISO 16826:2014 Non-destructive testing Ultrasonic testing checks for discontinuities perpendicular to the surface

Society of Automotive Engineers (SAE)

SAE J1939/16-2018 Automatic Baud Rate Detection Process
SAE J1939/16-2015 Automatic Baud Rate Detection Process
SAE J428B-1978 ULTRASONIC INSPECTION
SAE ARP2654A-2023 Ultrasonic Thickness Testing
SAE J428-1991 Ultrasonic Inspection March 1991
SAE AMS2634-2011 ULTRASONIC INSPECTION Thin Wall Metal Tubing
SAE AMS2634A-1995 ULTRASONIC INSPECTION Thin Wall Metal Tubing
SAE AMS2634C-2022 Ultrasonic Inspection Thin Wall Metal Tubing
SAE AMS2634B-2019 Ultrasonic Inspection Thin Wall Metal Tubing
SAE J2615-2005 Testing Performance of Fuel Cell Systems for Automotive Applications
SAE J2380-2009 Vibration Testing of Electric Vehicle Batteries
SAE J2380-2013 Vibration Testing of Electric Vehicle Batteries

SAE - SAE International

SAE J1939-16-2018 Automatic Baud Rate Detection Process
SAE J1939-16-2015 Automatic Baud Rate Detection Process
SAE AMS2630-1960 ULTRASONIC INSPECTION
SAE J428-2018 Ultrasonic Inspection
SAE J428-1983 Ultrasonic Inspection
SAE AMS2631-1972 Ultrasonic Inspection of Titanium Alloys
SAE J2380-2021 Vibration Testing of Electric Vehicle Batteries

SCC

JIS G 0582:2022 Automated ultrasonic examination of steel pipes and tubes
DANSK DS/ISO 13588:2019 Non-destructive testing of welds – Ultrasonic testing – Use of automated phased array technology
DANSK DS/CEN/TR 15134:2005 Non-destructive testing - Automated ultrasonic examination - Selection and application of systems
AENOR UNE-CEN/TR 15134 IN:2011 Non-destructive testing - Automated ultrasonic examination - Selection and application of systems
NS-EN 10308:2001 Non destructive testing — Ultrasonic testing of steel bars
AENOR UNE-EN 10308:2002 Non destructive testing - Ultrasonic testing of steel bars
DANSK DS/EN 10308:2001 Non destructive testing - Ultrasonic testing of steel bars
NS-EN ISO 13588:2019 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019)
NS-EN ISO 13588:2012 Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology (ISO 13588:2012)
BS 3889-1:1983 Methods for non-destructive testing of pipes and tubes-Methods of automatic ultrasonic testing for the detection of imperfections in wrought steel tubes
AENOR UNE-EN ISO 13588:2020 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019)
DANSK DS/EN ISO 13588:2019 Non-destructive testing of welds – Ultrasonic testing – Use of automated phased array technology (ISO 13588:2019)
NS-EN 15317:2007 Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment
NS 10220:1977 Non-destructive testing — Ultrasonic testing — Glossary of terms
UNE-EN 15317:2008 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
NS-EN 15317:2013 Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment
AENOR UNE-EN 15317:2014 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
DANSK DS/EN 15317:2013 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
DANSK DS/EN 14127:2011 Non-destructive testing – Ultrasonic thickness measurement
DANSK DS/EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - Transmission technique
NS 10210:1982 Non-destructive testing — Ultrasonic testing — Calibration block 1
AENOR UNE-EN 14127:2011 Non-destructive testing - Ultrasonic thickness measurement
NS-EN 14127:2004 Non-destructive testing — Ultrasonic thickness measurement
NS-EN 14127:2011 Non-destructive testing — Ultrasonic thickness measurement
DANSK DS/EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles
DANSK DS/ISO 16809:2018 Non-destructive testing – Ultrasonic thickness measurement
BS 3923-2:1965 Methods for ultrasonic examination of welds. Automatic examination of welded seams
AS 3670:1989 Non-destructive testing - Ultrasonic testing of universal beams and columns
NS-EN ISO 5577:2017 Non-destructive testing - Ultrasonic testing - Vocabulary (ISO 5577:2017)
AENOR UNE-EN ISO 5577:2017 Non-destructive testing - Ultrasonic testing - Vocabulary (ISO 5577:2017)
AS B259.4:1968 Glossary of terms used in non-destructive testing - Ultrasonic flaw detection
DANSK DS/EN ISO 5577:2017 Non-destructive testing – Ultrasonic testing – Vocabulary (ISO 5577:2017)
UNE-EN 10246-8:2000 NON-DESTRUCTIVE TESTING OF STEEL TUBES. PART 8: AUTOMATIC ULTRASONIC TESTING OF THE WELD SEAM OF ELECTRIC WELDED STEEL TUBES FOR THE DETECTION OF LONGITUDINAL IMPERFECTIONS.
DANSK DS/ISO 23864:2021 Non‐destructive testing of welds – Ultrasonic testing – Use of automated total focusing technique (TFM) and related technologies
AS 2452.3:1985 Non-destructive testing - Determination of thickness - Use of ultrasonic testing
10/30198090 DC BS EN ISO 13588. Non-destructive testing of welds. Ultrasonic testing. Use of (semi-) automated phased array technology
BS PD IEC/TR 61430:1997 Secondary cells and batteries. Test methods for checking the performance of devices designed for reducing explosion hazards. Lead-acid starter batteries
NS-EN 1714:1997 Non-destructive examination of welds — Ultrasonic examination of welded joints
DIN EN 15317 E:2013 Draft Document - Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment; German version FprEN 15317:2013
DANSK DS/EN ISO 10893-8:2011 Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
05/30129194 DC EN 15317. Non-destructive testing. Ultrasonic testing. Characterization and verification of ultrasonic thickness measuring equipment
DANSK DS/EN 1714:1998 Non-destructive examination of welds - Ultrasonic examination of welded joints
DIN EN ISO 13588 E:2018 Draft Document - Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO/DIS 13588:2018); German and English version prEN ISO 13588:2018
DANSK DS/ISO 20601:2018 Non-destructive testing of welds – Ultrasonic testing – Use of automated phased array technology for steel components with small wall thickness
NS-EN 10246-8:1999 Non-destructive testing of steel tubes — Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections
UNE-EN 14127:2005 Non-destructive testing - Ultrasonic thickness measurement.
DANSK DS/ISO 19675:2024 Non-destructive testing – Ultrasonic testing – Specification for a calibration block for phased array testing (PAUT)
UNE-EN 10246-6:2000 NON-DESTRUCTIVE TESTING OF STEEL TUBES. PART 6: AUTOMATIC FULL PERIPHERAL ULTRASONIC TESTING OF SEAMLESS STEEL TUBES FOR THE DETECTION OF TRANSVERSE IMPERFECTIONS.
DANSK DS/EN ISO 2400:2012 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1
DIN EN ISO 10893-11/A1 E:2019 Draft Document - Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change the ultrasonic test frequency...
DANSK DS/EN ISO 10893-11/A1:2020 Non-destructive testing of steel tubes – Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections – Amendment 1: Change of ultrasonic test frequency; change of accept...
AENOR UNE-EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012)
NS-EN ISO 16823:2014 Non-destructive testing — Ultrasonic testing — Transmission technique (ISO 16823:2012)
AENOR UNE-EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012)
11/30238603 DC BS 9690-2. Non-destructive testing. Guided wave testing. Part 2. Basic requirements for guided wave testing of pipes, pipelines and structural tubulars
11/30238920 DC BS ISO 16810. Non-destructive testing. Ultrasonic testing. General principles
NS-EN ISO 16810:2014 Non-destructive testing — Ultrasonic testing — General principles (ISO 16810:2012)
DANSK DS/EN ISO 7963:2010 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2
DANSK DS/EN ISO 20601:2019 Non-destructive testing of welds – Ultrasonic testing – Use of automated phased array technology for thin-walled steel components (ISO 20601:2018)
NS-EN ISO 20601:2018 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components (ISO 20601:2018)
AS 2574:1982 Non-destructive testing - Ultrasonic testing of steel castings and classification of quality
DANSK DS/ISO 23243:2020 Non-destructive testing – Ultrasonic testing with arrays – Vocabulary
UNE-EN 1714:1998 NON DESTRUCTIVE EXAMINATION OF WELDS. ULTRASONIC EXAMINATION OF WELDED JOINTS.
DANSK DS/EN 583-3:1998 Non destructive testing - Ultrasonic examination - Part 3: Transmission technique
NS-EN 1713:1998 Non-destructive examination of welds — Ultrasonic examination — Characterization of indications in welds
DANSK DS/EN ISO 16811:2014 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting
NS-EN 583-3:1997 Non-destructive testing — Ultrasonic examination — Part 3: Transmission technique
NS-EN 583-1:1998 Non-destructive testing — Ultrasonic examination — Part 1: General principles
NS-EN ISO 17640:2018 Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment (ISO 17640:2018)
NS-EN 10246-16:2000 Non-destructive testing of steel tubes — Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections
DIN EN 1714 E:2007 Draft Document - Non-destructive testing of welds - Ultrasonic testing of welded joints; German version prEN 1714:2007
NS-EN 10246-6:1999 Non-destructive testing of steel tubes — Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections
DANSK DS/EN ISO 10893-11:2011 Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
AS 2889:1987 Microwave oven leakage detectors for household use
DANSK DS/EN 583-1:1999 Non-destructive testing - Ultrasonic examination - Part 1: General principles
AENOR UNE-EN ISO 10893-8:2011 Non-destructive testing of steel pipes. Part 8: Automatic ultrasonic testing of seamless and welded steel tubes for the detection of lamellar imperfections. (ISO 10893-8:2011)
NS-EN 10246-9:2000 Non-destructive testing of steel tubes — Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections
07/30135963 DC BS EN 1714. Non-destructive testing of welds. Ultrasonic testing of welded joints
DIN EN ISO 16810 E:2013 Draft Document - Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012); German version FprEN ISO 16810:2013
DANSK DS/EN ISO 23864:2021 Non‐destructive testing of welds – Ultrasonic testing – Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021)
NS-EN ISO 17640:2017 Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment (ISO 17640:2017)
DANSK DS/EN ISO 16826:2014 Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface
09/30197002 DC BS ISO 10830. Space systems. Non-destructive testing. Automatic ultrasonic inspection method of graphite ingot for solid rocket motors
NS-EN ISO 17640:2010 Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment (ISO 17640:2010)
DANSK DS/EN ISO 11666:2018 Non-destructive testing of welds – Ultrasonic testing – Acceptance levels (ISO 11666:2018)
DIN EN ISO 16823 E:2013 Draft Document - Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012); German version FprEN ISO 16823:2013

GOST

GOST ISO 13588-2022 Non-destructive testing of welds. Ultrasonic testing. Automated control by ultrasonic method with the use of phased arrays

HU-MSZT

MI 12773-1972 Hydropower equipment. Hydrogen battery pack detection method
MSZ 11029/4-1981 Testing process. Electronic instrumentation to examine dynamic strains caused by fluctuating transition resistance
MI 8888/29-1979 Environmental testing guidelines. Ultrasonic testing
MSZ 4822/4-1972 High voltage equipment stability detection voltage wave detection
MSZ 4822/6-1973 Electrical stability testing of high-voltage equipment. Radio wave detection
MSZ 7874/2-1987 Metal ultrasonic testing. Feature monitoring
MNOSZ 3517-1951 White tile wavy ring wash basin

RO-ASRO

STAS 9552-1987 Ultrasonic fault detection MANUAL EXAMINATION OF FUSE WELDING JOINTS
STAS R 12500/3-1987 Ultrasonic fault detection CHECKING LP METHODS IX SERVICE OF ULTRASONICFAULT DETECTORS
STAS 9075-1979 Corrugated sheet paper DETERMINATION OF UNDULATIONS FLATTENING RESISTANCE
STAS R 12500/2-1987 ULTRASONIC FAULT DETECTION CALIBRATION AND ADJUSTMENT OF ULTRASONIC FA DL DETECTORS

United States Navy

NAVY MIL-B-6937-1950 BATTERY TESTER

German Institute for Standardization

DIN 10271:1977 Analysis of animal fats; determination of B?mer value
DIN EN ISO 13588:2019-07 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019); German version EN ISO 13588:2019
DIN EN ISO 5577:2024 Non-destructive testing - Ultrasonic testing - Vocabulary; German and English version prEN ISO 5577:2024
DIN EN 10308:2002-03 Non-destructive testing - Ultrasonic testing of steel bars; German version EN 10308:2001
DIN EN ISO 5577:2017-05 Non-destructive testing - Ultrasonic testing - Vocabulary (ISO 5577:2017); German version EN ISO 5577:2017
DIN EN 15317:2014-02 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment; German version EN 15317:2013
DIN EN ISO 13588:2019 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019)
DIN EN ISO 16823:2014-07 Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012); German version EN ISO 16823:2014
DIN EN ISO 16810:2014-07 Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012); German version EN ISO 16810:2014
DIN EN ISO 16809:2020-02 Non-destructive testing - Ultrasonic thickness measurement (ISO 16809:2017); German version EN ISO 16809:2019
DIN EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012); German version EN ISO 16810:2014
DIN EN ISO 20601:2019-04 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components (ISO 20601:2018); German version EN ISO 20601:2018
DIN EN ISO 11666:2018-05 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018); German version EN ISO 11666:2018
DIN EN ISO 10893-10:2020-10 Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011 + Amd 1...
DIN EN ISO 10893-8:2020-10 Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011 + Amd 1:2020); German version EN ISO 10893-8:2011 + A1:2020
DIN EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012); German version EN ISO 16823:2014
DIN EN ISO 2400:2013-01 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012); German version EN ISO 2400:2012
DIN EN ISO 7963:2023-02 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022); German version EN ISO 7963:2022
DIN EN ISO 10893-11:2020-10 Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011 + Amd 1:2020); German version EN ISO 10893-11:201...
DIN EN ISO 23243:2021-03 Non-destructive testing - Ultrasonic testing with arrays - Vocabulary (ISO 23243:2020); German version EN ISO 23243:2020
DIN EN ISO 16811:2014-06 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting (ISO 16811:2012); German version EN ISO 16811:2014
DIN EN ISO 16823:2024 Non-destructive testing - Ultrasonic testing - Through-transmission technique (ISO/DIS 16823:2024); German and English version prEN ISO 16823:2024
DIN EN ISO 16810:2024-02 Non-destructive testing - Ultrasonic testing - General principles (ISO/DIS 16810:2024); German and English version prEN ISO 16810:2024 / Note: Date of issue 2024-01-19*Intended as replacement for DIN EN ISO 16810 (2014-07).
DIN EN ISO 16810:2024 Non-destructive testing - Ultrasonic testing - General principles (ISO/DIS 16810:2024); German and English version prEN ISO 16810:2024
DIN EN ISO 23864:2022-04 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021); German version EN ISO 23864:2021
DIN EN ISO 20601:2019 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components (ISO 20601:2018)
DIN EN ISO 16823:2024-02 Non-destructive testing - Ultrasonic testing - Through-transmission technique (ISO/DIS 16823:2024); German and English version prEN ISO 16823:2024 / Note: Date of issue 2024-01-19*Intended as replacement for DIN EN ISO 16823 (2014-07).
DIN EN 583-1:1998 Non-destructive testing - Ultrasonic examination - Part 1: General principles; German version EN 583-1:1998
DIN EN ISO 16826:2014-06 Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface (ISO 16826:2012); German version EN ISO 16826:2014
DIN EN ISO 17640:2019 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2018)

Korean Agency for Technology and Standards (KATS)

KS B 0894-2003 Methods for automatic ultrasonic testing for welds of ferritic steel
KS B ISO 12710:2021 Non-destructive testing — Ultrasonic inspection — Evaluating electronic characteristics of ultrasonic test instruments
KS B ISO 5577:2022 Non-destructive testing — Ultrasonic testing — Vocabulary
KS B ISO 16810:2019 Non-destructive testing ― Ultrasonic testing ― General principles
KS B 0894-2018 Methods for automatic ultrasonic testing for welds of ferritic steel
KS D 0250-2021 Ultrasonic examination for steel pipes and tubes
KS B ISO 16823:2022 Non-destructive testing — Ultrasonic testing —Transmission technique
KS B 0894-2003(2013) Methods for automatic ultrasonic testing for welds of ferritic steel
KS D 0075-2014(2019) Ultrasonic inspection of titanium pipes and tubes
KS B ISO 20601:2021 Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology for thin-walled steel components
KS B ISO 11666:2019 Non-destructive testing of welds ― Ultrasonic testing ― Acceptance levels
KS D 0075-2021 Ultrasonic inspection of titanium pipes and tubes
KS B ISO 17640:2019 Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
KS B 0831-2021 Standard test blocks for ultrasonic testing
KS D 0075-1994 Ultrasonic inspection of titanium pipes and tubes
KS D 0075-2014 Ultrasonic inspection of titanium pipes and tubes
KS B ISO 2400:2019 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1
KS C IEC TS 61430-2023 Secondary cells and batteries — Test methods for checking the performance of devices designed for reducing explosion hazards — Lead-acid starter batteries
KS B ISO 23279-2013 Non-destructive testing of welds－Ultrasonic testing－Characterization of indications in welds
KS B ISO 16826:2022 Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface
KS B 0831-2001(2021) Standard test blocks for ultrasonic testing

GSO

GSO ISO 12710:2013 Non-destructive testing -- Ultrasonic inspection -- Evaluating electronic characteristics of ultrasonic test instruments
BH GSO ISO 13588:2017 Non-destructive testing of welds -- Ultrasonic testing -- Use of automated phased array technology
GSO ISO 16831:2015 Non-destructive testing -- Ultrasonic testing -- Characterization and verification of ultrasonic thickness measuring equipment
BH GSO ISO 16831:2016 Non-destructive testing -- Ultrasonic testing -- Characterization and verification of ultrasonic thickness measuring equipment
OS GSO ISO 16823:2013 Non-destructive testing -- Ultrasonic testing -- Transmission technique
GSO ISO 16810:2013 Non-destructive testing -- Ultrasonic testing -- General principles
GSO ISO 16823:2013 Non-destructive testing -- Ultrasonic testing -- Transmission technique
BH GSO ISO 16810:2016 Non-destructive testing -- Ultrasonic testing -- General principles
BH GSO ISO 16823:2016 Non-destructive testing -- Ultrasonic testing -- Transmission technique
GSO ISO 5577:2013 Non-destructive testing -- Ultrasonic inspection -- Vocabulary
GSO ISO 16809:2015 Non-destructive testing -- Ultrasonic thickness measurement
BH GSO ISO 12710:2016 Non-destructive testing -- Ultrasonic inspection -- Evaluating electronic characteristics of ultrasonic test instruments
OS GSO ISO 12710:2013 Non-destructive testing -- Ultrasonic inspection -- Evaluating electronic characteristics of ultrasonic test instruments
GSO IEC/TS 61430:2014 Secondary cells and batteries - Test methods for checking the performance of devices designed for reducing explosion hazards - Lead-acid starter batteries
OS GSO ISO 11666:2015 Non-destructive testing of welds -- Ultrasonic testing -- Acceptance levels
GSO ISO 11666:2015 Non-destructive testing of welds -- Ultrasonic testing -- Acceptance levels
BH GSO ISO 11666:2017 Non-destructive testing of welds -- Ultrasonic testing -- Acceptance levels
OS GSO ISO 10893-8:2015 Non-destructive testing of steel tubes -- Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
OS GSO ISO 7963:2008 Non-Destructive Testing - Ultrasonic Testing - Specification for Calibration Block No. 2
BH GSO ISO 10893-8:2016 Non-destructive testing of steel tubes -- Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
GSO ISO 16826:2013 Non-destructive testing -- Ultrasonic testing -- Examination for discontinuities perpendicular to the surface
BH GSO ISO 16811:2016 Non-destructive testing -- Ultrasonic testing -- Sensitivity and range setting
GSO 685:1997 METHODS OF TEST FOR WATER FOR LEAD-ACID BATTERIES
GSO ISO 16827:2013 Non-destructive testing -- Ultrasonic testing -- Characterization and sizing of discontinuities
BH GSO ISO 10893-11:2016 Non-destructive testing of steel tubes -- Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
BH GSO ISO 16826:2016 Non-destructive testing -- Ultrasonic testing -- Examination for discontinuities perpendicular to the surface
GSO ISO 16811:2013 Non-destructive testing -- Ultrasonic testing -- Sensitivity and range setting
GSO ISO 10893-8:2015 Non-destructive testing of steel tubes -- Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
BH GSO ISO 25902-2:2017 Titanium pipes and tubes -- Non-destructive testing -- Part 2: Ultrasonic testing for the detection of longitudinal imperfections
OS GSO ISO 16826:2013 Non-destructive testing -- Ultrasonic testing -- Examination for discontinuities perpendicular to the surface

ES-UNE

UNE-EN ISO 13588:2020 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019)
UNE-EN ISO 10893-11:2011/A1:2021 Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency; change of accept...
UNE-EN ISO 20601:2019 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components (ISO 20601:2018)
UNE-EN ISO 23864:2022 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021)
UNE-EN ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018)
UNE-EN ISO 10893-10:2011/A1:2021 Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of u...
UNE-EN ISO 16809:2020 Non-destructive testing - Ultrasonic thickness measurement (ISO 16809:2017)
UNE-EN ISO 23243:2022 Non-destructive testing - Ultrasonic testing with arrays - Vocabulary (ISO 23243:2020)

RU-GOST R

GOST 8.212-1984 State system for ensuring the uniformity of measurements. Measures of electromotive force. Standard cells. Calibration methods and facilities
GOST 22727-1988 Rolled sheet. Ultrasonic test methods

International Organization for Standardization (ISO)

ISO 16831:2012 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
ISO 16810:2012 Non-destructive testing - Ultrasonic testing - General principles
ISO/CD 5577:2023 Non-destructive testing — Ultrasonic testing — Vocabulary
ISO/FDIS 4773 Non-destructive testing — Ultrasonic guided wave testing using the phased array technique
ISO/DIS 4773 Non-destructive testing — Ultrasonic guided wave testing using the phased array technique
ISO 4773:2011 Non-destructive testing — Ultrasonic guided-wave testing using the phased-array technique
ISO/CD 16831:2023 Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment
ISO/CD 16823:2011 Non-destructive testing — Ultrasonic testing — Through-transmission technique
ISO 4773:2023 Non-destructive testing — Ultrasonic guided-wave testing using the phased-array technique
ISO 23243:2020 Non-destructive testing - Ultrasonic testing with arrays - Vocabulary
ISO/CD 16810:2023 Non-destructive testing — Ultrasonic testing — General principles
ISO 16809:2012 Non-destructive testing - Ultrasonic thickness measurement
ISO 20601:2018 Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology for thin-walled steel components
ISO 16809:2017 Non-destructive testing - Ultrasonic thickness measurement
ISO 7963:2022 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 2
ISO/AWI TR 23867.2:2023 Ultrasonic testing of hardmetals
ISO 16811:2012 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting
ISO/CD 16811:2011 Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
ISO/CD TR 23867 Ultrasonic testing of hardmetals
ISO/TS 16829:2017 Non-destructive testing - Automated ultrasonic testing - Selection and application of systems
ISO/CD 16826:2011 Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface
ISO/CD 16946 Non-destructive testing — Ultrasonic testing — Specification for step wedge calibration block

British Standards Institution (BSI)

BS EN ISO 13588:2019 Non-destructive testing of welds. Ultrasonic testing. Use of automated phased array technology
BS PD CEN/TR 15134:2005 Non-destructive testing — Automated ultrasonic examination — Selection and application of systems
BS 9690-2:2011 Non-destructive testing. Guided wave testing. Basic requirements for guided wave testing of pipes, pipelines and structural tubulars
BS EN 15317:2013 Non-destructive testing. Ultrasonic testing. Characterization and verification of ultrasonic thickness measuring equipment
BS EN ISO 10893-8:2011+A1:2020 Non-destructive testing of steel tubes - Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
BS EN ISO 16810:2014 Non-destructive testing. Ultrasonic testing. General principles
BS EN ISO 16823:2014 Non-destructive testing. Ultrasonic testing. Transmission technique
PD IEC/TR 61430:1997 Secondary cells and batteries. Test methods for checking the performance of devices designed for reducing explosion hazards. Lead-acid starter batteries
BS EN 1714:1998(2004) Non - destructive testing of welds — Ultrasonic testing of welded joints
BS EN ISO 23864:2021(2022) Non - destructive testing of welds — Ultrasonic testing — Use of automated total focusing technique (TFM) and related technologies
BS EN ISO 19675:2024 Non-destructive testing. Ultrasonic testing. Specification for a calibration block for phased array testing (PAUT)
BS 9690-1:2011 Non-destructive testing. Guided wave testing. General guidance and principles
BS EN ISO 23864:2021 Non-destructive testing of welds. Ultrasonic testing. Use of automated total focusing technique (TFM) and related technologies
BS EN ISO 10893-11:2011+A1:2020 Non-destructive testing of steel tubes - Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
BS ISO 23864:2021 Non-destructive testing of welds. Ultrasonic testing. Use of automated total focusing technique (TFM) and related technologies
24/30474014 DC Draft BS ISO 16831 Non-destructive testing— Ultrasonic testing — Characterization and verification of ultrasonic equipment for the determination of thickness
BS EN 14127:2011 Non-destructive testing. Ultrasonic thickness measurement
BS EN ISO 11666:2018 Non-destructive testing of welds. Ultrasonic testing. Acceptance levels
BS EN ISO 2400:2012 Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 1
BS EN ISO 16826:2014 Non-destructive testing. Ultrasonic testing. Examination for discontinuities perpendicular to the surface
BS EN 583-1:1999(2008) Non - destructive testing — Ultrasonic examination — Part 1 : General principles
BS EN ISO 10893-9:2011+A1:2020 Non-destructive testing of steel tubes - Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes
BS EN ISO 20601:2018 Non-destructive testing of welds. Ultrasonic testing. Use of automated phased array technology for thin-walled steel components
24/30474872 DC BS EN ISO 16810 Non-destructive testing - Ultrasonic testing - General principles
BS EN ISO 16811:2014 Non-destructive testing. Ultrasonic testing. Sensitivity and range setting
ISO 16946:2024 Non-destructive testing. Ultrasonic testing. Specification for a step wedge standard block
BS EN ISO 16946:2024 Non-destructive testing. Ultrasonic testing. Specification for a step wedge standard block
BS EN ISO 11666:2011 Non-destructive testing of welds. Ultrasonic testing. Acceptance levels

KR-KS

KS B ISO 12710-2021 Non-destructive testing — Ultrasonic inspection — Evaluating electronic characteristics of ultrasonic test instruments
KS B ISO 16810-2019 Non-destructive testing ― Ultrasonic testing ― General principles
KS B ISO 5577-2022 Non-destructive testing — Ultrasonic testing — Vocabulary
KS B ISO 16823-2022 Non-destructive testing — Ultrasonic testing —Transmission technique
KS B ISO 20601-2021 Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology for thin-walled steel components
KS B ISO 11666-2019 Non-destructive testing of welds ― Ultrasonic testing ― Acceptance levels
KS B ISO 17640-2019 Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment
KS B ISO 10893-8-2023 Non-destructive testing of steel tubes — Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
KS B ISO 2400-2019 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1
KS B ISO 10893-11-2023 Non-destructive testing of steel tubes — Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
KS B ISO 16826-2022 Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface

FI-SFS

SFS 3288-1976 Non-destructive testing. Ultrasonic testing. Detect fragment 1
SFS 3284-1975 Non-destructive testing. Ultrasonic testing. general rules
SFS 3293-1979 Non-destructive testing. Ultrasonic testing of steel castings

AENOR

UNE-EN 10308:2002 Non destructive testing - Ultrasonic testing of steel bars
UNE-EN 15317:2014 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
UNE-EN ISO 13588:2013 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2012)
UNE-EN 14127:2011 Non-destructive testing - Ultrasonic thickness measurement
UNE-EN ISO 5577:2017 Non-destructive testing - Ultrasonic testing - Vocabulary (ISO 5577:2017)
UNE-EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012)
UNE-EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - Transmission technique (ISO 16823:2012)
UNE-EN ISO 17640:2011 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2010)

Association Francaise de Normalisation

NF A09-017*NF EN ISO 5577:2017 Non-destructive testing - Ultrasonic testing - Vocabulary
NF EN ISO 5577:2017 Essais non destructifs - Contrôle par ultrasons - Vocabulaire
NF A09-322:1985 Non destructive testing - Ultrasonic testing - Specifications of ultrasonic probes for industrial use
NF EN ISO 13588:2019 Non-destructive testing of welded assemblies - Ultrasonic inspection - Use of the automated multi-element technique
NF EN ISO 16823:2014 Essais non destructifs - Contrôle par ultrasons - Technique par transmission
NF A09-332*NF EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles
NF A09-334*NF EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - Transmission technique
NF EN ISO 16810:2014 Essais non destructifs - Contrôle par ultrasons - Principes généraux
NF A09-023*NF EN ISO 23243:2020 Non-destructive testing - Ultrasonic testing with arrays - Vocabulary
NF EN ISO 16809:2019 Non-destructive testing - Ultrasonic thickness measurement
NF EN 15317:2013 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring devices
NF A09-323:1987 Non-destructive testing - Ultrasonic testing - Methods for specifying ultrasonic probes for industrial use
NF EN ISO 2400:2012 Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc d'étalonnage no 1
NF A89-517*NF EN ISO 23864:2021 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies
NF EN ISO 10893-10:2011 Non-destructive testing of steel tubes - Part 10: automated ultrasonic testing over the entire circumference of seamless and welded steel tubes (except submerged arc under powder flux) for the detection of longitudinal imperfections...
NF EN ISO 10893-10/A1:2020 Non-destructive testing of steel tubes - Part 10: automated ultrasonic testing over the entire circumference of seamless and welded steel tubes (except submerged arc under powder flux) for the detection of longitudinal imperfections...
NF A09-321:1988 Non destructive testing. Ultrasonic testing. Methods for specifying ultrasonic apparatus.
NF A09-018*NF ISO 19675:2017 Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing (PAUT)
A09-325:1987 Non-destructive testing. Ultrasonic testing. Acoustic beams. Generalities.
NF C48-230:1987 Intrusion detection - Ultrasound motion detectors - Specific standard.
NF A89-520*NF EN ISO 17640:2018 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
NF A89-521*NF EN ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
NF EN ISO 7963:2022 Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc d'étalonnage no 2
NF A49-785-11/A1*NF EN ISO 10893-11/A1:2020 Non-destructive testing of steel tubes - Part 11 : automated ultrasonic testing of weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1 : change of ultrasonic test frequency; change of acceptance
NF EN ISO 16946:2017 Essais non destructifs - Essais par ultrasons - Spécifications relatives aux blocs d'étalonnage à gradins
NF A89-514*NF EN ISO 20601:2018 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components
NF A09-333*NF EN ISO 16811:2014 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting
NF EN ISO 10893-11:2011 Non-destructive testing of steel tubes - Part 11: automated ultrasonic testing of the weld bead of welded steel tubes for the detection of longitudinal and/or transverse imperfections
NF EN ISO 20601:2018 Non-destructive testing of welded assemblies - Ultrasonic testing - Use of automated multi-element technique for thin-walled steel components
NF EN ISO 16811:2014 Non-destructive testing - Ultrasonic testing - Adjustment of sensitivity and time base

Danish Standards Foundation

DS/EN ISO 13588:2012 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology
DS/EN 10308:2002 Non destructive testing - Ultrasonic testing of steel bars
DS 2333:1987 Non-destructive testing. Ultrasonic testing. Terminology
DS/EN 15317:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
DS/EN 14127:2011 Non-destructive testing - Ultrasonic thickness measurement
DS/ISO 23864:2021 Non‐destructive testing of welds – Ultrasonic testing – Use of automated total focusing technique (TFM) and related technologies
DS/EN ISO 2400:2012 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1
DS/EN ISO 17640:2011 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
DS/EN ISO 7963:2010 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2
DS/EN ISO 11666:2011 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
DS/EN ISO 10893-8:2011 Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
DS/EN ISO 23243:2020 Non-destructive testing – Ultrasonic testing with arrays – Vocabulary (ISO 23243:2020)
DS/EN 583-3:1998 Non destructive testing - Ultrasonic examination - Part 3: Transmission technique
DS/ISO 23243:2020 Non-destructive testing – Ultrasonic testing with arrays – Vocabulary

AT-ON

ONORM M 3003-1994 Ultrasonic testing of metallic Compound piain bearings
OENORM EN ISO 23864:2021 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021)

Lithuanian Standards Office

LST EN 10308-2002 Non destructive testing - Ultrasonic testing of steel bars
LST EN 15317-2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
LST EN ISO 13588:2012 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2012)
LST EN 14127-2011 Non-destructive testing - Ultrasonic thickness measurement
LST EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012)
LST EN ISO 17640:2011 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640:2010)

European Committee for Standardization (CEN)

prEN ISO 5577 Non-destructive testing — Ultrasonic testing — Vocabulary
EN 10308:2001 Non destructive testing - Ultrasonic testing of steel bars
prEN ISO 16831 rev Non-destructive testing — Ultrasonic testing — Characterization and verification of ultrasonic thickness measuring equipment
prEN ISO 16810 rev Non-destructive testing — Ultrasonic testing — General principles
prEN ISO 16823 rev Non-destructive testing — Ultrasonic testing — Transmission technique
EN ISO 23243:2020 Non-destructive testing - Ultrasonic testing with arrays - Vocabulary (ISO 23243:2020)
EN ISO 16810:2014 Non-destructive testing - Ultrasonic testing - General principles
EN ISO 16823:2014 Non-destructive testing - Ultrasonic testing - Transmission technique
prEN ISO 23864:2021 Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021)
prEN ISO 16823 Non-destructive testing - Ultrasonic testing - Through-transmission technique (ISO/DIS 16823:2024)
prEN ISO 16811 rev Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
prEN ISO 16810 Non-destructive testing - Ultrasonic testing - General principles (ISO/DIS 16810:2024)
prEN ISO 16826 rev Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface

BE-NBN

NBN 838-1970 Seamless duct ultrasonic inspection. Longitudinal wave defect detection

IT-UNI

UNI EN ISO 23243:2021 Non-destructive testing - Ultrasonic testing with arrays - Vocabulary

SE-SIS

SIS SS 11 42 01-1984 Non-destructive testing - Ultrasonic testing
SIS SS 11 40 52-1980 Non-destructive testing — Ultrasonic testing — Terminology
SIS SS IEC 659:1983 Nuclear instrumentation - Multichannel amplitude analyzers - Test methods
SIS SS 11 42 41-1979 Ultrasonic testing — Calibration block No 2
SIS SS 11 42 04-1988 Non-destructive testing - Ultrasonic testing of bars
SIS SEN 08 01 03-1966 Lead-acid accumulators. Checking the 10-hour-rate capacity of stationary batteries

NO-SN

NS 10210-1982 Non-destructive testing - Ultrasonic testing - Calibration block 1

ZA-SANS

SANS 61430:1997 Secondary cells and batteries - Test methods for checking the performance of devices designed for reducing explosion hazards - Lead-acid starter batteries

Standard Association of Australia （SAA）

AS ISO 16809:2020 Non-destructive testing — Ultrasonic thickness measurement
AS 2452.3:2005 Non-destructive testing - Determination of thickness - Use of ultrasonic testing
AS 2574:2000 Non-destructive testing - ultrasonic testing of ferritic steel castings

US-FCR

FCR UFGS-05 05 23.13 10-2014 ULTRASONIC INSPECTION OF WELDMENTS
FCR UFGS-05 05 23.13 10-2008 ULTRASONIC INSPECTION OF WELDMENTS

PL-PKN

PN-EN ISO 10893-11-2011/A1-2021-01 E Non-destructive testing of steel tubes -- Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections -- Amendment 1: Change of ultrasonic test frequency; change of accepta

Japanese Industrial Standards Committee (JISC)

JIS G 0589:2013 Automated full peripheral ultrasonic thickness examination of steel pipes and tubes
JIS Z 2356:2006 Method of automatic ultrasonic inspection for graphite ingot
JIS G 0584:2022 Ultrasonic examination for arc welded steel pipes

DIN

DIN EN 14127:2004 Non-destructive testing - Ultrasonic thickness measurement

CEN - European Committee for Standardization

EN ISO 16809:2019 Non-destructive testing - Ultrasonic thickness measurement
EN ISO 20601:2018 Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology for thin-walled steel components