plastic mixture ingredients

plastic mixture ingredients, Total:237 items.

The international standard classification for "plastic mixture ingredients" includes: Equipment for the rubber and plastics industries , Films and sheets , Plastics in general , Thermoplastic materials .

The Chinese standard classification for "plastic mixture ingredients" includes: Machinery for rubber and plastic , Plastic profile , Basic standards and general methods for synthetic resin and plastic , Synthetic resin and plastic .

Professional Standard - Machinery

JB/T 53116-1999 Plastic mixer product quality classification
JB/T 7669-1995 plastic mixer
JB/T 7669-2004 Plastics mixering machines

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 10903-1989 Check metod of mixer for plastics
GB/T 17689-2008 Geosynthetics - Plastic geogrids
GB/T 19470-2004 Geosythetic - Plastic geonet
GB/T 17689-1999 Geosynthetics--Plastic geogrid
GB/T 10902-1989 Plastics mixer machines
GB/T 19274-2003 Geosynthetics - Plastic geocell

未注明发布机构

DIN EN ISO 527-5 E:2009-01 Determination of tensile properties of plastics Part 5: Test conditions for fiber-reinforced plastic composites (draft)
DIN EN ISO 527-5 E:2020-08 Determination of tensile properties of plastics Part 5: Test conditions for fiber-reinforced plastic composites (draft)
DIN 7708-4:1978 Types of plastics moulding compounds; Moulding compounds for cold moulding
DIN 16780-2 E:1988-11 Polymer blend thermoplastic moulding materials; preparation of specimens and determination of their properties
DIN 7708-4:1968 Types of plastics moulding compounds; Moulding compounds for cold moulding
DIN EN ISO 3671 E:2023-01 Determination of Volatile Compounds from Plastic Aminoplastic Molding Materials (Draft)

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39715.3-2021 Plastics—Biobased content—Part 3:Determination of biobased synthetic polymer content

Group Standards of the People's Republic of China

T/GDPIA 53-2022 Analytical methods for components of starch-based biodegradable plastics
T/GDJD 003-2024 Food mixer (pet food processor)
T/QGCML 1129-2023 Plastic particle mixing device

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35504-2017 Plastic—Chlorinated poly(vinyl chloride)compounds

交通运输部

JT/T 1084-2016 Asphalt mixture wheel rolling forming machine

Liaoning Provincial Standard of the People's Republic of China

DB21/T 2557-2016 Method for Determination of Synthetic Pigments in Compound Fertilizers (Blended Fertilizers)

German Institute for Standardization

DIN 16780-1:1988 Plastic moulding materials; thermoplastic moulding materials of polymeric blends; classification and designation
DIN 16780-2:1990 Polymer blend thermoplastic moulding materials; preparation of specimens and determination of their properties
DIN EN ISO 3671:1998-10 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:1976); German version EN ISO 3671:1998 / Note: To be replaced by DIN EN ISO 3671 (2023-01).
DIN EN ISO 10724-2:2000 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates (ISO 10724-2:1998); German version EN ISO 10724-2:2000
DIN 7708-4:1983 Types of plastics moulding compounds; Moulding compounds for cold moulding
DIN 53773-1:1988 Testing of colouring materials in plastics; testing of colouring materials in polyvinyl chloride pastes (plastisols); composition and preparation of basic mixtures
DIN EN 12575:1998 Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC; German version EN 12575:1998
DIN EN 14469-1:2004-08 Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 1: Composition and preparation of basic mixtures; German version EN 14469-1:2004
DIN EN ISO 527-5:2009 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2009); German version EN ISO 527-5:2009
DIN EN 1186-11:2002-12 Materials and articles in contact with foodstuffs - Plastics - Part 11: Test methods for overall migration into mixtures of <(hoch)14>C-labelled synthetic triglycerides; German version EN 1186-11:2002
DIN ISO 2115:2001-04 Plastics - Polymer dispersions - Determination of white point temperature and minimum film-forming temperature (ISO 2115:1996)
DIN EN ISO 23667:2007 Packaging - Transport packaging for dangerous goods - Rigid plastics and plastics composite IBCs - Compatibility testing (ISO 23667:2007) English version of DIN EN ISO 23667:2007-10
DIN EN ISO 14912:2006-11 Gas analysis - Conversion of gas mixture composition data (ISO 14912:2003); German version EN ISO 14912:2006
DIN ISO 8362-7:2007 Injection containers and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part (ISO 8362-7:2006)；English version of DIN ISO 8362-7:2007-06
DIN ISO 2115:2001 Plastics - Polymer dispersions - Determination of white point temperature and minimum film-forming temperature (ISO 2115:1996)
DIN EN ISO 3671:2023 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:2023)
DIN EN 17228:2019-06 Plastics - Bio-based polymers, plastics, and plastics products - Terminology, characteristics and communication; German version EN 17228:2019
DIN EN 17228:2018 Plastics - Bio-based polymers, plastics, and plastic products - Terminology, characteristics and communication; German and English version prEN 17228:2018
DIN EN 17228:2019 Plastics - Bio-based polymers, plastics, and plastics products - Terminology, characteristics and communication
DIN EN ISO 14126:2000 Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999); German version EN ISO 14126:1999

Association Francaise de Normalisation

NF T51-141:1974 Low density polyethylene based plastics. Determination of the content of carbon black. Rapid method.
NF D25-101-11*NF EN 1186-11:2003 Materials and articles in contact with foodstuffs - Plastics - Part 11 : test methods for overall migration into mixtures of 14C-labelled synthetic triglycerides
NF P98-150:1992 Bituminous asphalt. Laying of base, binder and surface courses. Components. Mix contents. Performance and checks.
NF ISO 8332:2018 Rubber Mixing Ingredients - Sulfur - Test Methods
NF T51-034-5:2009 Plastics - Determination of tensile properties - Part 5 : test conditions for unidirectional fibre-reinforced plastic composites.
NF T53-003:1988 PLASTICS. POLYVINYLCHLORIDE (PVC-P) HOMOPOLYMERIC AND COPOLYMERIC PLASTICIZED COMPOUNDS. PART 1 : DESIGNATION.
NF EN 1186-11:2003 Materials and articles in contact with foodstuffs - Plastics - Part 11: test methods for overall migration in mixtures of synthetic 14C-labeled triglycerides
NF T45-132:1996 RUBBER COMPOUNDING INGREDIENTS. CARBON BLACK. DETERMINATION OF THE ASH CONTENT.
NF ISO 21869:2022 Rubber Mixing Ingredients - Magnesium Oxide - Test Methods
NF EN 13108-3:2016 Mélanges bitumineux - Spécifications des matériaux - Partie 3 : enrobés bitumineux mous
NF T53-002:1985 PLASTICS. UNPLASTICIZED COMPOUNDS OF HOMOPOLYMERS AND COPOLYMERS OF VINYL CHLORIDE. DESIGNATION.
NF T57-530:1991 Plastics. Prepregs. Bulk moulding compound (bmc) and dough moulding compound (dmc). Basis for a specification.
NF T45-105:1986 RUBBER COMPOUNDING INGREDIENTS. CARBON BLACK. STANDARD REFERENCE BLACKS.
NF ISO 9298:2017 Rubber Mixing Ingredients - Zinc Oxide - Test Methods
NF EN ISO 8362-6:2011 Récipients et accessoires pour produits injectables - Partie 6 : capsules pour flacons d'injection fabriquées en un mélange aluminium-plastique
NF EN 300138-6:2006 Gas Analysis - Conversion of composition data of gas mixtures
NF EN ISO 3671:1998 Matières plastiques - Matières à mouler aminoplastes - Détermination des matières volatiles.
NF P98-115:1992 ROAD FOUNDATIONS. CONSTRUCTION OF PAVEMENT STRUCTURES. COMPONENTS. MIX COMPONENTS AND FORMULAE. PERFORMANCE AND CONTROL.
NF EN 300092-4:2006 Gas Analysis - Conversion of composition data of gas mixtures
NF EN ISO 14912:2006 Gas Analysis - Conversion of composition data of gas mixtures
NF EN ISO 10724-2:2001 Plastics - Injection molding of test pieces in thermosetting powder molding compositions (PMC) - Part 2: small plates
NF T51-799*NF EN 17228:2019 Plastics - Bio-based polymers, plastics, and plastic products - Terminology, characteristics and communication
NF EN 17228:2019 Plastiques - Polymères, plastiques et produits en plastique biosourcés - Terminologie, caractéristiques et communication
NF T51-600-3*NF EN ISO 14526-3:2000 Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 3 : requirements for selected moulding compounds

RO-ASRO

STAS R 12729-1989 PLASTICS Symbols for synthetic polymers
STAS 7282-1965 plastic. Determination of density of bulk mixtures
STAS 5800-1958 plastic. Determination of volatile substances and moisture content of mixtures
STAS 11476-1981 UNWOVEN TEXTILE MATERIALS OF COTTON, MIXTURES NATURAL AND SYNTHETIC POLYMERES ND POLYMER MIXTURES inimum colour and printing fastness

SCC

BS 3262-1:1987 Hot-applied thermoplastic road marking materials-Specification for constituent materials and mixtures
BS 3262-1:1989 Hot-applied thermoplastic road marking materials-Specification for constituent materials and mixtures
NS-EN 1186-11:2002 Materials and articles in contact with foodstuffs — Plastics — Part 11: Test methods for overall migration into mixtures of C-labelled synthetic triglycerides
MIL MIL-M-46069-1964 MOLDING PLASTIC, GLASS/EPOXY PRE-MIX
BS 4398:1969 Specification for compounding ingredients for rubber test mixes
NS-EN 14469-1:2004 Pigments and extenders — Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) — Part 1: Composition and preparation of basic mixtures
MIL MIL-P-43043C-1978 PLASTIC MOLDING MATERIAL, PRE-MIX, POLYESTER, GLASS FIBER REINFORCED(SUPERSEDING MIL-P-43043B)
BS DD ENV 1186-11:1995 Materials and articles in contact with foodstuffs. Plastics-Test methods for overall migration into mixtures of <sup>14</sup>C-labelled synthetic triglycerides
DANSK DS/EN 1186-11:2002 Materials and articles in contact with foodstuffs - Plastics - Part 11: Test methods for overall migration into mixtures of C-labelled synthetic triglycerides
BS 1322:1946 Synthetic resin (aminoplastic) moulding material and mouldings
DANSK DS/EN 14469-1:2004 Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 1: Composition and preparation of basic mixtures
AENOR UNE-EN 14469-1:2004 Pigments and extenders - Testing of coloring materials in plasticized polyvinyl chloride (PVC-P) - Part 1: Composition and preparation of basic mixtures
DIN EN 12697-55 E:2018 Draft Document - Bituminous mixtures - Test methods - Part 55: Organoleptic assessment of compatibility of constituent materials of a mixture with bitumen emulsion; German and English version prEN 12697-55:2018
CAN/CGSB 139.2-M86-1986 Determination of the composition of feather and down mixtures by manual sorting
NS-EN 1842:1997 Plastics — Thermoset moulding compounds (SMC — BMC) — Determination of compression moulding shrinkage
HOLDEN HN 1857-2012 Thermoplastic Plastic Polyester Compounds
DANSK DS/EN ISO 14912:2006 Gas analysis - Conversion of gas mixture composition data
MIL MIL-P-46122B-1975 PLASTIC MOLDING MATERIAL AND PLASTIC EXTRUSION MATERIAL, POLYVINYLIDENE FLUORIDE POLYMER AND COPOLYMER (NO S/S DOCUMENT) (SUPERSEDING MIL-P-46122A)
NS-EN ISO 3671:1998 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:1976)
DANSK DS/EN 17228:2019 Plastics – Bio-based polymers, plastics, and plastics products – Terminology, characteristics and communication
NS-EN 17228:2019 Plastics — Bio-based polymers, plastics, and plastics products — Terminology, characteristics and communication

Japanese Industrial Standards Committee (JISC)

JIS A 5741:2012 Wood-plastic recycled composite
JIS A 5741:2006 Wood-plastic recycled composite
JIS A 5741:2016 Wood-plastic recycled composite
JIS K 7154-2:2002 Plastics -- Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) -- Part 2: Small plates
JIS K 7154-1:2002 Plastics -- Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) -- Part 1: General principles and moulding of multipurpose test specimens
JIS K 5516:1992 Ready mixed paint (Synthetic resin type)
JIS K 6918:2007 Diallyl phthalate moulding compounds

British Standards Institution (BSI)

BS 3262-1:1989(1999) Hot - applied thermoplastic road marking materials — Part 1 : Specification for constituent materials and mixtures
BS ISO 16620-3:2015 Plastics. Biobased content. Determination of biobased synthetic polymer content
BS EN ISO 3671:2023 Plastics. Aminoplastic moulding materials. Determination of volatile matter
BS EN ISO 3671:1999 Plastics. Aminoplastic moulding materials. Determination of volatile matter
BS EN ISO 527-5:2009 Plastics - Determination of tensile properties - Part 5:Test conditions for unidirectional fibre-reinforced plastic composites
BS ISO 10724-2:1999 Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs). Small plates
BS EN ISO 10724-2:1999 Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs). Small plates
BS EN ISO 10724-2:2001 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Small plates
BS EN 1186-11:2002 Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration into mixtures of C-labelled synthetic triglycerides
BS EN 13706-3:2002 Reinforced plastics composites - Specifications for pultruded profiles - Specific requirements
BS ISO 10724-1:1998 Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs). General principles and moulding of multipurpose test specimens
BS EN ISO 75-2:2004 Plastics - Determination of temperature of deflection under load - Plastics and ebonite
BS EN ISO 14912:2006(2009) Gas analysis — Conversion of gas mixture composition data
23/30464063 DC BS ENISO 3671 Plastics. Aminoplastic moulding materials. Determination of volatile matter
BS EN ISO 10724-1:2001 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - General principles and moulding of multipurpose test specimens
BS EN ISO 10724-1:1999 Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs). General principles and moulding of multipurpose test specimens
BS EN 17228:2019 Plastics. Bio-based polymers, plastics, and plastics products. Terminology, characteristics and communication

GOST

GOST R ISO 16620-3-2022 Plastics. Biobased content. Part 3. Determination of biobased synthetic polymer content
GOST R ISO 16620-5-2022 Plastics. Biobased content. Part 5. Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
GOST R ISO 16620-4-2022 Plastics. Biobased content. Part 4. Determination of biobased mass content

HU-MSZT

MSZ KGST 1694-1979 Determination of mixture content of plastic resins

U.S. Environmental Protection Agency (U.S. EPA)

EPA 40 CFR PART 414-2009 ORGANIC CHEMICALS, PLASTICS, AND SYNTHETIC FIBERS

Society of Automotive Engineers (SAE)

SAE J250-1959 Synthetic Resin Plastic Sealers, Nondrying Type

SAE - SAE International

SAE J250-2013 Synthetic Resin Plastic Sealers@ Nondrying Type

GSO

GSO ISO 16620-3:2015 Plastics -- Biobased content -- Part 3: Determination of biobased synthetic polymer content
BH GSO ISO 16620-3:2017 Plastics -- Biobased content -- Part 3: Determination of biobased synthetic polymer content
GSO ISO 16869:2014 Plastics -Assessment of the effectiveness of fungistatic compounds in plastics formulations
GSO ISO 14526-3:2014 Plastics -- Phenolic powder moulding compounds (PF-PMCs) -- Part 3: Requirements for selected moulding compounds
GSO ASTM D6400:2014 Standard Specification for Compostable Plastics
GSO ISO 14528-3:2014 Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 3: Requirements for selected moulding compounds
BH GSO ISO 14912:2016 Gas analysis -- Conversion of gas mixture composition data
GSO ISO 2115:2015 Plastics -- Polymer dispersions -- Determination of white point temperature and minimum film-forming temperature
GSO ISO 14912:2013 Gas analysis -- Conversion of gas mixture composition data
BH GSO ISO 1147:2016 Plastics/rubber -- Polymer dispersions and synthetic rubber latices -- Freeze-thaw cycle stability test
OS GSO ISO 1147:2015 Plastics/rubber -- Polymer dispersions and synthetic rubber latices -- Freeze-thaw cycle stability test
GSO ISO 1147:2015 Plastics/rubber -- Polymer dispersions and synthetic rubber latices -- Freeze-thaw cycle stability test

American National Standards Institute （ANSI)

ANSI/ASTM D5988:1997 Test Method for Determining the Aerobic Biodegradation of Soil of Plastic Materials or Residual Plastic Materials After Composing
ANSI/ASTM D5338:1998 Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions
ANSI/ASTM D6358:1999 Classification System for Poly(Phenylene Sulfide) Injection Molding and Extrusion Materials

European Committee for Standardization (CEN)

EN 1186-11:2002 Materials and articles in contact with foodstuffs - Plastics - Part 11: Test methods for overall migration into mixtures of C-labelled synthetic triglycerides
EN ISO 527-5:2009 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
EN ISO 527-5:2021 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2021)
DD ENV 1186-11-1995 Materials and Articles in Contact with Foodstuffs - Plastics - Part 11: Test Methods for Overall Migration into Mixtures of 14C-Labelled Synthetic Triglycerides
EN ISO 10724-2:2000 Plastics - Injection Moulding of Test Specimens of Thermosetting Powder Moulding Compounds (PMCs) - Part 2: Small Plates
prEN ISO 14912 rev Gas analysis - Conversion of gas mixture composition data
EN ISO 3671:2023 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:2023)

Military Standards (MIL-STD)

DOD A-A-53536-1988 EMBEDDING COMPOUND, LABORATORY (PARAFFIN AND PLASTIC POLYMERS)

TR-TSE

TS 2294-1976 UREA - FORMALDEHYDE MOLDING COMPOUNDS

International Organization for Standardization (ISO)

ISO 16869:2008 Plastics - Assessment of the effectiveness of fungistatic compounds in plastics formulations
ISO 16620-3:2015 Plastics - Biobased content - Part 3: Determination of biobased synthetic polymer content
ISO/DIS 3671 Plastics — Aminoplastic moulding materials — Determination of volatile matter
ISO 10724-2:1998 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates
ISO 2115:1996 Plastics - Polymer dispersions - Determination of white point temperature and minimum film-forming temperature
ISO/DIS 14912:2023 Gas analysis — Conversion of gas mixture composition data
ISO 16869:2001 Plastics - Assessment of the effectiveness of fungistatic compounds in plastics formulations
ISO 10724-1:1998 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of multipurpose test specimens

Korean Agency for Technology and Standards (KATS)

KS M 3359-2011 Specification for epoxy molding compounds
KS M 1995-2009 Determination of organic compounds emitted from plastics－Gas chromatographic method
KS M 3156-1997 Plasticized polyvinyl chloride compounds
KS M 3156-2012 Plasticized polyvinyl chloride compounds
KS M ISO 10724-2:2010 Plastics－Injection moulding of test specimens of thermosetting powder moulding compounds(PMCs)－Part 2：Small plates
KS M ISO 10724-2-2010(2020) Plastics－Injection moulding of test specimens of thermosetting powder moulding compounds(PMCs)－Part 2：Small plates
KS I ISO 14912-2020 Gas analysis－Conversion of gas mixture composition data
KS M ISO 16869:2014 Plastics — Assessment of the effectiveness of fungistatic compounds in plastics formulations
KS F 2540-1974 Liquid membrane-Forming compounds for curing concrete
KS M ISO 16869:2011 Plastics--Assessment of the effectiveness of fungistatic compounds in plastics formulations
KS H 2174-2011(2016) Seasoning mixture sauce
KS I ISO 14912-2015(2020) Gas analysis－Conversion of gas mixture composition data
KS M ISO 14526-3:2006 Plastics－Phenolic powder moulding compounds(PF－PMCs)－Part 3：Requirements for selected moulding compounds
KS M ISO 10724-1:2010 Plastics-Injection moulding of test specimens of thermosetting powder moulding compounds(PMCs)-Part 1:General principles and moulding of multipurpose test specimens
KS M ISO 14130:2012 Fibre-reinforced plastic composites-Determination of apparent interlaminar shear strength by short-beam method
KS T ISO 23667:2016 Packaging－Transport packaging for dangerous goods－ Rigid plastics and plastics composite IBCs－Compatibility testing
KS M ISO 14126:2012 Fibre-reinforced plastic composites－Determination of compressive properties in the in-plane direction

UY-UNIT

UNIT 98-1953 Conductor with thermoplastic (the plastic component is mainly polyvinyl chloride or ethylene acetate polymer)
UNIT 126-1958 Circuit composite conductors with thermoplastic insulators (the plastic component is mainly polyethylene chloride or ethylene acetate polymer)

SE-SIS

SIS 16 42 00-1964 Aminuplastic moulding compounds. General information
SIS 16 67 20-1968 Polyester moulding compounds (alkyd moulding compounds). General information
SIS 16 61 31-1971 Polypropylene injection moulding and extrusion compounds
SIS SS 16 42 01-1984 Plastics — Aminoplastic moulding materials — Determination of volatile matter

ES-UNE

UNE-EN 1186-11:2003 Material and articles in contact with foodstuffs. Plastics. Part 11: Test methods for overall migration into mixtures of C-labelled synthetic triglycerides.
UNE-EN ISO 14912:2007/AC:2008 Gas analysis - Conversion of gas mixture composition data (ISO 14912:2003/Cor 1:2006)
UNE-EN 17228:2020 Plastics - Bio-based polymers, plastics, and plastics products - Terminology, characteristics and communication

US-CFR-file

CFR 49-176.907-2013 Transportation. Part176:Carriage by vessel. Section176.907:Polymeric Beads and Plastic Molding Compounds.

IT-UNI

UNI 7534-1976 Elastic materials: raw materials and ingredients, preparation and vulcanization of test mixtures
UNI 7720-1978 Elastic materials: raw materials and ingredients, testing mixtures with sulfur. Requirements and tests
UNI 7351-1974 Uncoated plastic mixtures of homopolymers and copolymers of chlorinated vinyl. Systems and Grading

VE-FONDONORMA

NORVEN 76-20-1965 Measurement of Mixed Clay Mass Composition
NORVEN 76-23-1965 Measurement of particulate components in mixtures

(U.S.) Ford Automotive Standards

FORD WSB-M4D844-A11-2006 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), MOLDING COMPUND
FORD WSB-M4D844-A8-2006 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), MOLDING COMPOUND
FORD WSB-M4D650-A-2005 THERMOPLASTIC POLYURETHANE/POLYCARBONATE (TPU+PC) BLEND MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4D650-A-2009 THERMOPLASTIC POLYURETHANE/POLYCARBONATE (TPU+PC) BLEND MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D844-A9-2006 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), IMPACT RESISTANT MOLDING COMPOUND

RU-GOST R

GOST 33351-2015 Polymer composites. Production of samples for testing by injection moulding of long-fibre moulding compounds
GOST 32495-2013 Aggregates, fines and its mixtures made from recycled reinforced and non-reinforced concrete. Specifications
GOST 23409.18-1978 Moulding sands and sand mixtures. Method for determination of clayey component
GOST 24888-1981 Plastics, polymers and synthetic resins. Chemical names, terms and definitions
GOST 33367-2015 Polymer composites. Production of plates by compression moulding of prepregs and premixes for preparation of test specimens

United States Navy

NAVY QPL-15731-50 NOTICE 2-2008 PLASTIC MIX, REFRACTORY, FIRE CLAY, SUPER DUTY
NAVY MIL-M-46069 ADMIN NOTICE 5-2005 MOLDING PLASTIC, GLASS/EPOXY PRE-MIX
NAVY MIL-M-46069-1964 MOLDING PLASTIC, GLASS/EPOXY PRE-MIX
NAVY MIL-M-46069 (2)-1965 MOLDING PLASTIC, GLASS/EPOXY PRE-MIX

GOSTR

GOST R 57785-2017 Polymer composites. Prepregs and premixes. Determination of compression moulding shrinkage

American Society for Testing and Materials (ASTM)

ASTM D5988-96 Standard Test Method for Determining Aerobic Biodegradation in Soil of Plastic Materials or Residual Plastic Materials After Composting
ASTM C673-97(2018) Standard Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes
ASTM D6400-04 Standard Specification for Compostable Plastics
ASTM C673-97(2022) Standard Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes
ASTM C1054-18 Standard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens
ASTM C673-97 Standard Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes

AENOR

UNE-EN 14469-1:2004 Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 1: Composition and preparation of basic mixtures
UNE-EN 1842:1998 PLASTICS. THERMOSET MOULDING COMPOUNDS (SMC - BMC). DETERMINATION OF COMPRESSION MOULDING SHRINKAGE

Danish Standards Foundation

DS/EN ISO 3671:1999 Plastics - Aminoplastic moulding materials - Determination of volatile matter
DS/EN 14469-1:2004 Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 1: Composition and preparation of basic mixtures
DS/EN 1186-11:2002 Materials and articles in contact with foodstuffs - Plastics - Part 11: Test methods for overall migration into mixtures of C-labelled synthetic triglycerides
DS/EN ISO 14912:2007 Gas analysis - Conversion of gas mixture composition data
DS/EN ISO 14912/AC:2008 Gas analysis - Conversion of gas mixture composition data

Lithuanian Standards Office

LST EN 1186-11-2002 Materials and articles in contact with foodstuffs - Plastics - Part 11: Test methods for overall migration into mixtures of C-labelled synthetic triglycerides
LST EN 14469-1-2004 Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 1: Composition and preparation of basic mixtures
LST EN ISO 3671:2001 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:1976)

Defense Logistics Agency

DLA A-A-20001 A-2002 SPICES AND SPICE BLENDS
DLA MIL-C-46110 B-1984 COATING COMPOUND, OXIDE BLACK
DLA MIL-C-46110 B VALID NOTICE 3-2004 COATING COMPOUND, OXIDE BLACK

U.S. Military Regulations and Norms

ARMY MIL-P-43043 C VALID NOTICE 4-2013 Plastic Molding Material, Pre-Mix, Polyester, Glass Fiber Reinforced
ARMY MIL-DTL-3691 E (2)-2010 DYE MIX, VIOLET

CEN - European Committee for Standardization

PREN 12697-55-2018 Bituminous mixtures - Test methods - Part 55: Organoleptic assessment of compatibility of constituent materials of a mixture with bitumen emulsion
PREN 17228-2018 Plastics - Bio-based polymers@ plastics@ and plastic products - Terminology@ characteristics and communication
EN 17228:2019 Plastics - Bio-based polymers@ plastics@ and plastics products - Terminology@ characteristics and communication

Association of German Mechanical Engineers

VDI 3490 Blatt 11-1980 Measurement of gases; preparation of calibration gas mixtures using plastic bags

Natural Gas Processor's Association (NGPA)

GPA RR-31-1978 Equilibrium Phase Properties of a Synthetic Sour Gas Mixture and a Simulated Natural Gas Mixture

PT-IPQ

NP EN 1612-1-2000 Rubber and plastics machines Reaction moulding machines Part 1:Safety requirements for metering and mixing units

IN-BIS

IS 7863-1975 Specification for Fertilizer Physical Mixtures

CH-SNV

SEV 191 d-1950 Plastic (organic plastic) material testing. Filler density requirements for molding mixes
VSM 10691-1935 Plastic (organic plastic) material testing. Determine molding mix inflation coefficient
SEV 1003-1959 Plastic (organic plastic) material testing. Bulk density requirements for molding mixes

CZ-CSN

CSN 72 2431-1970 Compoimds for synthetic plasters and artificial stone s
CSN 38 5552-1987 Gaseous fuels Determination of composition of calibration gas mixture by comparison method

KR-KS

KS I ISO TS 29041-2016 Gas mixtures－Gravimetric preparation－Mastering correlations in composition

BE-NBN

NBN T 97-107-1980 Preparation of calibration gas mixtures using plastic bags

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 4239-1999 Composition Changes in Refrigerant Blends for Automotive Air Conditioning