Plastic Composition Testing

Plastic Composition Testing, Total:247 items.

The international standard classification for "Plastic Composition Testing" includes: Equipment for the chemical industry , Equipment for the rubber and plastics industries , Protection against dangerous goods , Plastics in general , Tobacco, tobacco products and related equipment .

The Chinese standard classification for "Plastic Composition Testing" includes: Machinery for rubber and plastic , Marking, packaging, transport and storage in general , Basic standards and general methods for synthetic resin and plastic , Tobacco curing machinery .

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35382-2017 Test methods for energy consumption of blow moulding machines for plastics

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 30200-2013 Test Method for Energy Consumption of Rubber and Plastics Injection Moulding Machines
GB/T 22236-2008 Testing of plastics—Size reduction of plastic products for test purposes
GB/T 30200-2023 Test method for energy consumption of rubber and plastics injection moulding machines
GB/T 15585-1995 Determination of shrinkage for injection moulding thermoplastics
GB/T 25157-2010 Inspections methods of injection moulding machines for rubber and plastics
GB/T 10903-1989 Check metod of mixer for plastics

Group Standards of the People's Republic of China

T/CSRA 19-2022 Plastic composition test pretreatment method
T/CSRA 20-2022 Determination of plastic compositions—Quantitative method of degradable plastics

Taiwan Provincial Standard of the People's Republic of China

CNS 10880-5-1995 Method of Test for Paint Components - Ash
CNS 11529-1989 Method of Test for Plastics Injection Molding Machines
CNS 12954-1992 Method of Test for Hazardous Components in Fertilizers:Determination of Arsenic
CNS 10880.5-1995 Method of Test for Paint Components - Ash
CNS 12955-1992 Method of Test for Hazardous Components in Fertilizers:Determination of Cadmium Content

Hunan Provincial Standard of the People's Republic of China

DB43/T 2842-2023 Rapid detection method for degradable components of biodegradable plastics and their products

Professional Standard - Machinery

JB/T 12530.3-2015 Nondestructive testing of weld joint of thermoplastics. Part 3: Radiographic examination
JB/T 12530.2-2015 Nondestructive testing of weld joint of thermoplastics. Part 2: Visual examination
JB/T 12530.4-2015 Nondestructive testing of weld joint of thermoplastics. Part 4: Ultrasonic examination

Hebei Provincial Standard of the People's Republic of China

DB13/T 5948-2024 Rapid identification of main components of biodegradable plastic bags and total content detection method

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 25156-2020 General specifications and inspection methods of rubber and plastics injection moulding machines

Professional Standard - Tobacco

YC/T 235.5-2007 General tolerances—Part 5:Plastic piece made from plastic semi-manufactured goods

HU-MSZT

MSZ 7452-1961 Detecting soluble components in polystyrene to detect plastics
MSZ KGST 1199-1978 Plastic fragmentation testing
MSZ 10192/3-1970 Plastic testing. Hard foam (plastic) tear detection
MSZ KGST 871-1978 Plastic plasticity testing
MSZ 10192/4-1970 Plastic testing. Hard foam (plastic) water content detection
MSZ 7569-1969 Plastic testing, based on plastic thermal softening point testing
MSZ 10192/6-1970 Plastic testing. Deformation detection of hard foam plastics. temperature function
MSZ 10192/5-1980 Plastic testing. Heavy plastic content
MSZ 1427/2.lap-1966 Detect plastic plastic apparent density
MSZ 7754-1961 Plastic testing. Sensitive temperature detection
MSZ 10092-1961 Plastic testing. Softening loss detection
MSZ 17744-1957 Plastic testing. Sensitive temperature detection
MSZ 7526-1984 Plastic stickiness detection
MSZ 1425-1971 Plastic density testing
MSZ 1427/3.lap-1966 Compaction detection plastic plastic based calculation
MSZ 7759-1961 Plastic testing. Plastic sheet drilling capabilities
MSZ 10038-1962 Raw material testing. laboratory ingredients
MSZ 7333-1959 Plastic testing, hot hardened plastic sampling and extrusion
MSZ 7766-1962 Plastic foil testing standards
MSZ 10186-1972 Plastic testing. Physical inspection of common products
MSZ 10440-1962 Plastic testing. Attention! Card
MSZ 11682-1962 Plastic testing. Thermal expansion detection mode
MSZ 5553/2.lap-1968 Plastic disc detection system
MSZ 7768-1963 Electrical Insulating Plastic Foil Inspection
MSZ 10097-1963 Review Plastic Polyester Testing
MSZ 3489/13-1980 Pieces of Fabric, Samples and Garments Testing Methods Dimensional Testing Provided by Sock Assortment
MSZ 11688-1963 Hard PVC plastic disc detection mode
MSZ 7764-1970 Plastic floor leather detection method
MSZ 7753-1966 Plastic testing. Polyethylene quantity measurement
MSZ KGST 885-1978 Plastic air conditioning and inspection areas
MSZ 10198-1962 Definition of polyamide for testing moisture content in plastics
MSZ 3489/4.lap-1965 Testing methods for pieces of fabric, standard parts and ready-made garment products Fabric structural mark inspection
MSZ 710/1-1988 Plastic material forming
MSZ KGST 983-1978 General standards for physical testing of plastics
MSZ 11687-1982 Testing methods for layered plastic products
MSZ 3489/5.lap-1965 Testing methods for pieces of fabric, standard parts and ready-made garment products Air permeability testing
MSZ 1421-1968 Plastic testing hardness measurement ball penetration method
MSZ 3489/6.lap-1965 Testing methods for pieces of fabric, standard parts and ready-made garment products Water absorption test

German Institute for Standardization

DIN EN 12814-5:2024 Testing of welded joints of thermoplastics semi-finished products - Part 5: Macroscopic examination; German and English version prEN 12814-5:2024
DIN EN 13100-4:2013-01 Non destructive testing of welded joints of thermoplastics semifinished products - Part 4: High voltage testing; German version EN 13100-4:2012
DIN EN 13100-3:2005-02 Non-destructive testing of welded joints in thermoplastics semi-finished products - Part 3: Ultrasonic testing; German version EN 13100-3:2004
DIN EN 13100-1:2017-08 Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination; German version EN 13100-1:2017
DIN EN 13100-1:2017 Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination
DIN EN 13100-1 E:2015-12 Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination
DIN EN 13100-2:2019-11 Non-destructive testing of welded joints in thermoplastics semi-finished products - Part 2: X-ray radiographic testing; German version EN 13100-2:2019
DIN EN 13100-2:2019 Non-destructive testing of welded joints in thermoplastics semi-finished products - Part 2: X-ray radiographic testing
DIN EN 12814-5:2000-10 Testing of welded joints of thermoplastics semi-finished products - Part 5: Macroscopic examination; German version EN 12814-5:2000
DIN EN 13100-2 E:2018-09 Non-destructive testing of welded joints in thermoplastics semi-finished products - Part 2: X-ray radiographic testing
DIN EN 13100-1:2000 Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination; German version EN 13100-1:1999
DIN 53736:1973 Testing of plastics; determination of the melt temperature of semicristalline plastics
DIN EN ISO 294-4:2019-04 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018); German version EN ISO 294-4:2019
DIN EN ISO 3671:1998-10 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:1976); German version EN ISO 3671:1998 / Note: To be replaced by DIN EN ISO 3671 (2023-01).
DIN EN 12814-5:2000 Testing of welded joints of thermoplastics semi-finished products - Part 5: Macroscopic examination; German version EN 12814-5:2000
DIN EN ISO 293:2023-06 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
DIN EN ISO 294-4 E:2002-09 Injection molding of plastic thermoplastic material specimens Part 4: Determination of molding shrinkage (draft)
DIN EN ISO 3671 E:2023-01 Determination of Volatile Compounds from Plastic Aminoplastic Molding Materials (Draft)
DIN EN ISO 294-3:2020-11 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020); German version EN ISO 294-3:2020
DIN 53434:1985 Testing of rigid cellular plastics; determination of the water absorption of semi-finished and finished products by water immersion
DIN EN ISO 3671:2023 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:2023)
DIN 53477:2018-09 Testing of plastics - Determination of particle size distribution of moulding materials by dry sieving analysis
DIN EN ISO 294-3:1998 Plastics Injection molding of thermoplastic test specimens Part 3: Small plates
DIN 53733:2021 Testing of plastics - Size reduction of plastic products for test purposes
DIN 53733:1976 Testing of Plastics; Size Reduction of Plastic Products for Test Purposes
DIN EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018)
DIN EN ISO 3671:2023-01 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO/DIS 3671:2022); German and English version prEN ISO 3671:2022 / Note: Date of issue 2022-12-02*Intended as replacement for DIN EN ISO 3671 (1998-10).
DIN EN ISO 294-2:2019-03 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018); German version EN ISO 294-2:2018
DIN 7742-1:1988-01 Plastic moulding materials; cellulose ester(CA, CP, CAB) thermoplastic moulding materials; classification and designation
DIN 53733:2015 Testing of plastics - Size reduction of plastic products for test purposes
DIN EN 12814-1:1999-12 Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test; German version EN 12814-1:1999
DIN 53465:1963 Testing of Plastics; Determination of the Closing Time of Thermosetting Compression Moulding Materials
DIN EN ISO 294-4:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO/FDIS 294-4:2018); German and English version prEN ISO 294-4:2018

Spanish Association for Standardization (UNE)

UNE-EN 13100-4:2013 Non destructive testing of welded joints of thermoplastics semifinished products - Part 4: High voltage testing
UNE-EN 13100-3:2005 Non destructive testing of welded joints in thermoplastics semi-finished products - Part 3: Ultrasonic testing
UNE-EN 13100-1:2017 Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination
UNE-EN 13100-2:2021 Non-destructive testing of welded joints in thermoplastics semi- finished products - Part 2: X-ray radiographic testing
UNE-EN 13100-2:2005 Non-destructive testing of welded joints in thermoplastics semi-finished products - Part 2: X-ray radiographic testing
UNE 53034:1955 PLASTICS. ANALYSIS OF MOULDING POWDER OF PHENOPASTICS. DETERMINATION OF THE CHARGE
UNE-EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018)
UNE 53206:2012 Plastics. Large plastic bags made with plastic films. Characteristics and test methods
UNE-EN 13100-1:2000 NON DESTRUCTIVE TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 1: VISUAL EXAMINATION
UNE 53016:1982 PLASTICS. DETERMINATION OF BULK FACTOR OF MOULDING MATERIALS
UNE 53016:2014 Plastics. Determination of bulk factor of moulding materials
UNE-EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001)
UNE-EN ISO 3671:1999 PLASTICS - AMINOPLASTIC MOULDING MATERIALS - DETERMINATION OF VOLATILE MATTER (ISO 3671:1976)
UNE-EN 12814-1/AC:2003 Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test
UNE-EN 12877-2:2000 COLOURING MATERIALS IN PLASTICS - DETERMINATION OF COLOUR STABILITY TO HEAT DURING PROCESSING OF COLOURING MATERIALS IN PLASTICS - PART 2: DETERMINATION BY INJECTION MOULDING
UNE-EN 12814-5:2001 TESTING OF WELDED JOINTS IN THERMOPLASTICS - PART 5: MACROSCOPIC EXAMINATION.
UNE 53014:1955 PLASTICS. DETERMINATION OF PARTICLE SIZE OF MOULDING POWDER
UNE 53018:1955 PLASTICS. DETERMINATION OF THE HUMIDITY FACILITY OF THE MOULDING POWDER
UNE-EN 12814-1:2000 TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 1: BEND TEST

Lithuanian Standards Office

LST EN 13100-4-2013 Non destructive testing of welded joints of thermoplastics semifinished products - Part 4: High voltage testing
LST EN 13100-3-2005 Non destructive testing of welded joints in thermoplastics semi-finished products - Part 3: Ultrasonic testing
LST EN 13100-1-2002 Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination
LST EN 13100-2-2005 Non-destructive testing of welded joints in thermoplastics semi-finished products - Part 2: X-ray radiographic testing
LST EN 12814-5-2002 Testing of welded joints of thermoplastics semi-finished products - Part 5: Macroscopic examination
LST EN ISO 3671:2001 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:1976)
LST EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001)
LST EN 12877-2-2002 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 2: Determination by injection moulding

Danish Standards Foundation

DS/EN 13100-4:2012 Non destructive testing of welded joints of thermoplastics semifinished products - Part 4: High voltage testing
DS/EN 13100-3:2005 Non-destructive testing of welded joints of thermoplastics semi-finished products - Part 3: Ultrasonic testing
DS/EN 13100-1:2000 Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination
DS/EN 13100-2:2005 Non-destructive testing of welded joints of thermoplastics semi-finished products - Part 2: X-ray radiographic testing
DS/EN 12814-5:2000 Testing of welded joints of thermoplastics semi-finished products - Part 5: Macroscopic examination
DS/EN ISO 3671:1999 Plastics - Aminoplastic moulding materials - Determination of volatile matter
DS/EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage

CH-SNV

VSM 34161.2-1972 Hardenable plastic (molded plastic) material testing. Sample production
VSM 14032.3-1944 Plastic (organic plastic) material testing
SN 214 062/4-1988 Textiles — Tests for colour fastnessSection P01: Colour fastness to dry heat (excluding pressing)
SEV 4008-1965 Textiles — Tests for colour fastness Section N02: Colour fastness to bleaching: Peroxide
SN ISO 105/X06:1984 Plastic (organic plastic) material testing
SNV 24624-1938 Plastic (organic plastic) material testing
SNV 95825-1950 Plastic (organic plastic) material testing. Pull test
VSM 10856.2-1943 Plastic (organic plastic) material testing. Water absorbency regulations
VSM 15162-1969 Taper keys with or without gib head and their corresponding keyways (Dimensions in millimetres)
SN ISO 105/Z01:1984 Textiles — Tests for colour fastnessSection X01: Colour fastness to carbonizing: Aluminium Chloride
SNV 742 401.6-1971 Plastic (organic plastic) material testing. Liquid-proof properties specified
SNV 93100-1966 Plastic (organic plastic) material testing. Complies with Vicat’s thermoplastic softening temperature regulations
VSM 14031-1944 plastic. Material testing. Shear test (shear)
SN 198 421-1984 Measurement of thickness of textile fabrics
VSM 10691-1935 Plastic (organic plastic) material testing. Determine molding mix inflation coefficient
SEV 191 d-1950 Plastic (organic plastic) material testing. Filler density requirements for molding mixes

SCC

NS-EN 13100-3:2004 Non destructive testing of welded joints in thermoplastics semi-finished products — Part 3: Ultrasonic testing
DANSK DS/EN 13100-3:2005 Non-destructive testing of welded joints of thermoplastics semi-finished products - Part 3: Ultrasonic testing
AENOR UNE-EN 13100-3:2005 Non destructive testing of welded joints in thermoplastics semi-finished products - Part 3: Ultrasonic testing
NS-EN 13100-1:2017 Non destructive testing of welded joints of thermoplastics semi-finished products — Part 1: Visual examination
NS-EN 13100-1:1999 Non destructive testing of welded joints of thermoplastics semi-finished products — Part 1: Visual examination
DANSK DS/EN 13100-1:2017 Non destructive testing of welded joints of thermoplastics semi-finished products – Part 1: Visual examination
NS-EN 13100-2:2004 Non-destructive testing of welded joints in thermoplastics semi-finished products — Part 2: X-ray radiographic testing
AENOR UNE-EN 13100-2:2021 Non-destructive testing of welded joints in thermoplastics semi- finished products - Part 2: X-ray radiographic testing
DANSK DS/EN 13100-2:2019 Non-destructive testing of welded joints in thermoplastics semi- finished products – Part 2: X-ray radiographic testing
AENOR UNE-EN 13100-4:2013 Non destructive testing of welded joints of thermoplastics semifinished products - Part 4: High voltage testing
DIN EN 13100-1 E:2015 Draft Document - Non-destructive testing of welded joints of thermoplastics semi-finished products - Part 1 : Visual examination; German and English version prEN 13100-1:2015
NS-EN 13100-2:2019 Non-destructive testing of welded joints in thermoplastics semi- finished products — Part 2: X-ray radiographic testing
DANSK DS/EN 13100-4:2012 Non destructive testing of welded joints of thermoplastics semifinished products - Part 4: High voltage testing
NS-EN 13100-4:2012 Non destructive testing of welded joints of thermoplastics semifinished products — Part 4: High voltage testing
DIN DVS 2201-2:1985 Testing of semi-finished products of thermoplastics:Weldability Test methods – Requirements
DIN EN 13100-2 E:2018 Draft Document - Non-destructive testing of welded joints in thermoplastics semi-finished products - Part 2: X-ray radiographic testing; German and English version prEN 13100-2:2018
DIN EN 13100-4 E:2011 Draft Document - Non destructive testing of welded joints of thermoplastics semifinished products - Part 4: High voltage testing; German version prEN 13100-4:2011
11/30239974 DC BS EN 13100-4. Non destructive testing of welded joints of thermoplastics semifinished products. Part 4. High voltage testing
NS-EN 12814-5:2000 Testing of welded joints of thermoplastics semi-finished products — Part 5: Macroscopic examination
DANSK DS/EN 12814-5:2000 Testing of welded joints of thermoplastics semi-finished products - Part 5: Macroscopic examination
NS-EN ISO 294-4:1998 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 4: Determination of moulding shrinkage (ISO 294-4:1997)
DANSK DS/EN ISO 294-4/AC:2011 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
BS EN ISO 294-4:1998 Plastics. Injection moulding of test specimens of thermoplastic materials-Determination of moulding shrinkage
DANSK DS/EN ISO 293:2005 Plastics – Compression moulding of test specimens of thermoplastic materials
BS EN ISO 293:2005 Plastics. Compression moulding of test specimens of thermoplastic materials
DANSK DS/ISO 294-3:2020 Plastics – Injection moulding of test specimens of thermoplastic materials – Part 3: Small plates
AENOR UNE-EN ISO 294-4:2003 Plastics - Injection molding of test specimens of thermoplastic materials - Part 4: Determination of molding shrinkage (ISO 294-4:2001)
NS-EN ISO 3671:1998 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:1976)
NS-EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018)
AENOR UNE 53300:1975 Plastic materials. Determination of the tightness of tanks made of reinforced plastic materials.
NS-EN ISO 294-4:2003 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 4: Determination of moulding shrinkage (ISO 294-4:2001)
DANSK DS/EN ISO 294-4:2019 Plastics – Injection moulding of test specimens of thermoplastic materials – Part 4: Determination of moulding shrinkage (ISO 294-4:2018)
09/30206295 DC BS EN 16010. Plastics. Recycled plastics. Sampling procedures for testing plastics waste and recyclates
BS EN ISO 294-3:1998 Plastics. Injection moulding of test specimens of thermoplastic materials-Small plates
AENOR UNE-EN 13100-1:2000 NON DESTRUCTIVE TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 1: VISUAL EXAMINATION
DIN DVS 2201-1:2023 Testing of semi-finished products made of thermoplastics Basics – Notes
NS-EN 12814-4:2018 Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test
DANSK DS/EN 12814-2:2021 Testing of welded joints of thermoplastics semi-finished products – Part 2: Tensile test
AENOR UNE-EN ISO 3671:1999 PLASTICS - AMINOPLASTIC MOLDING MATERIALS - DETERMINATION OF VOLATILE MATTER (ISO 3671:1976)
DIN EN ISO 294-4 E:2018 Draft Document - Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO/FDIS 294-4:2018); German and English version prEN ISO 294-4:2018
DIN 53477 E:2018 Draft Document - Testing of plastics - Determination of particle size distribution of moulding materials by dry sieving analysis
DANSK DS/EN 12814-4:2018 Testing of welded joints of thermoplastics semi-finished products – Part 4: Peel test

Association Francaise de Normalisation

NF A89-811-1*NF EN 13100-1:2017 Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1 : visual examination
NF EN 1705:1997 Plastic piping systems - Thermoplastic valves - Test method for verifying a valve after an external shock
NF T51-294-4*NF EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4 : determination of moulding shrinkage
NF EN ISO 294-4:2019 Plastics - Injection molding of thermoplastic material specimens - Part 4: determination of molding shrinkage
NF A89-810-5*NF EN 12814-5:2000 Testing of welded joints of thermoplastics semi-finished products - Part 5 : macroscopic examination
NF EN ISO 293:2023 Plastiques - Moulage par compression des éprouvettes en matières thermoplastiques
NF EN ISO 7510:2024 Plastic piping systems - Glass-reinforced plastic (GRP) components - Determination of constituent contents
NF EN ISO 3671:1998 Matières plastiques - Matières à mouler aminoplastes - Détermination des matières volatiles.
NF EN 13100-3:2005 Contrôle non destructif des assemblages soudés sur produits semi-finis en thermoplastiques - Partie 3 : contrôle par ultrasons
NF T51-034-5:2009 Plastics - Determination of tensile properties - Part 5 : test conditions for unidirectional fibre-reinforced plastic composites.
NF EN 13100-1:2017 Contrôle non destructif des assemblages soudés sur produits semi-finis en thermoplastiques - Partie 1 : contrôle visuel
NF EN 12814-2:2021 Testing of welded assemblies on semi-finished thermoplastic products - Part 2: tensile test
NF EN 13100-2:2019 Essais non destructifs des assemblages soudés sur produits semi-finis en thermoplastiques - Partie 2 : contrôle radiographique par rayons X

British Standards Institution (BSI)

BS EN 13100-1:2017 Non destructive testing of welded joints of thermoplastics semi-finished products. Visual examination
24/30494119 DC BS EN 12814-5 Testing of welded joints of thermoplastics semi-finished products - Part 5: Macroscopic examination
BS EN ISO 3671:1999 Plastics. Aminoplastic moulding materials. Determination of volatile matter
BS EN ISO 3671:2023 Plastics. Aminoplastic moulding materials. Determination of volatile matter
BS EN ISO 294-4:2019 Plastics. Injection moulding of test specimens of thermoplastic materials. Determination of moulding shrinkage
BS EN ISO 293:2023 Plastics. Compression moulding of test specimens of thermoplastic materials
BS EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Determination of moulding shrinkage
BS EN ISO 7510:2024 Plastics piping systems. Glass-reinforced plastics (GRP) components. Determination of the amounts of constituents
BS ISO 7510:2017 Plastics piping systems. Glass-reinforced plastics (GRP) components. Determination of the amounts of constituents
23/30464063 DC BS ENISO 3671 Plastics. Aminoplastic moulding materials. Determination of volatile matter
BS EN ISO 294-3:2020 Plastics. Injection moulding of test specimens of thermoplastic materials - Small plates
BS ISO 171:2022 Plastics. Determination of bulk factor of moulding materials
BS EN 637:1995(2000)*BS 2782-12 mtd 1205a:1995 Plastics piping systems — Glass - reinforced plastics components — Determination of the amounts of constituents using the gravimetric method

BR-ABNT

ABNT MB-7-1939 Aggregate screening component detection
ABNT MB-1425-1979 Preparation of testing samples for aminoplastics used in casting plastics
ABNT MB-1424-1979 Preparation of testing samples for phenolic plastics used in casting plastics

CEN - European Committee for Standardization

PREN 13100-2-2018 Non-destructive testing of welded joints in thermoplastics semi-finished products - Part 2: X-ray radiographic testing

European Committee for Standardization (CEN)

EN 13100-1:1999 Non Destructive Testing of Welded Joints of Thermoplastics Semi-Finished Products - Part 1: Visual Examination
EN 13100-1:2017 Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination
EN ISO 3671:2023 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:2023)
EN ISO 527-5:2009 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
EN ISO 527-5:2021 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2021)
prEN ISO 3671 Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO/DIS 3671:2022)
EN ISO 172:1998 Plastics - Phenol-Formaldehyde Mouldings - Detection of Free Ammonia ISO 172:1978

International Organization for Standardization (ISO)

ISO/CD 8203-3:2023 Fibre-reinforced plastics — Non-destructive inspection techniques — Part 3: Active thermography
ISO/DIS 3671 Plastics — Aminoplastic moulding materials — Determination of volatile matter
ISO 7510:2017 Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents
ISO 172:1978 Plastics; Phenol-formaldehyde mouldings; Detection of free ammonia
ISO 7510:1997 Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents using the gravimetric method

AT-ON

ONORM E 3906 Blatt.2-1967 Cable supply tray made of plastic. Testing method
ONORM C 9552 Teil.1-1988 Plastic moulding materials; Polyethylene (PE) moulding materials; Classification and designation

SE-SIS

SIS SS 16 42 01-1984 Plastics — Aminoplastic moulding materials — Determination of volatile matter
SIS 16 11 45-1966 Plastics. Determination oj bull, factor oj moulding materials

South African Bureau of Standard

SANS 3126:2008 Plastics piping systems - Plastics components - Determination of dimensions

GSO

BH GSO ISO 294-4:2022 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 4: Determination of moulding shrinkage
GSO ISO 294-4:2021 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 4: Determination of moulding shrinkage
BH GSO ISO 293:2015 Plastics – compression moulding of test specimens of thermoplastic materials
GSO ISO 293:2014 Plastics – compression moulding of test specimens of thermoplastic materials

KR-KS

KS M ISO 7510-2019 Plastics piping systems — Glass-reinforced plastics(GRP) components — Determination of the amounts of constituents

Association of German Mechanical Engineers

DVS 2201-1-1988 Testing of semi-finished products made of thermoplastics; basics, tips
DVS 2201-1 Beiblatt 1-2003 Testing of semifinished products made of thermoplastics - Basics - Indications; Material and material short cuts

Korean Agency for Technology and Standards (KATS)

KS M ISO 7510:2019 Plastics piping systems — Glass-reinforced plastics(GRP) components — Determination of the amounts of constituents
KS C 2007-2004 Testing methods for thermosetting plastic insulating materials