higher bending strength

higher bending strength, Total:228 items.

The international standard classification for "higher bending strength" includes: Ceramics , Advanced ceramics , Rubber , Gears , Ceramic products , Raw materials and raw glass , Cellular materials , Testing of metals .

The Chinese standard classification for "higher bending strength" includes: Special ceramics , Building sanitary ceramics , Ceramic and glass in general , Basic standard and general method for synthetic rubber , Gear and gear drive , Daily use ceramics products , Synthetic resin and plastic , Rubber products in general , Metal processing property test method .

Taiwan Provincial Standard of the People's Republic of China

CNS 13976-1997 Method of test for flexural strength of dimensional stone
CNS 14387-1999 Method of test for bending strength of fine ceramic joint
CNS 12703-1990 Method of Test for Flexural Strength (Modulus of Rupture) of High Performance Ceramics at Elevated Temperature

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 14230-1993 of test method for bending load capacity of gears
GB/T 45763-2025 Fine ceramics—Test method for flexural strength of ceramic thin plates at room temperature—Three-point bending or four-point bending
GB/T 1696-2001 Ebonite-Determination of cross breakiing strength
GB/T 4741-1999 STANDARD test method for bending strength of ceramic materials
GB/T 6569-2006 Fine ceramics (advanced ceramics,advanced technical ceramics) - Test method for for flexural strength of monolithic ceramics at room temperature
GB/T 2833-1996 Test method for cross-bending strength of vitrified pipe
GB/T 6569-1986 Testing method for flexural strength of high performance ceramics
GB/T 1965-2023 Porous ceramics—Test method for flexural strength at room temperature
GB/T 14390-2008 Fine ceramics (advanced ceramics advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at elevated temperature
GB/T 14230-2021 Test method of tooth bending strength for gear load capacity
GB/T 8812.2-2007 Rigid cellular plastics—Determination of flexural properties—Part 2:Determination of flexural strength and apparent flexural modulus of elasticity
GB/T 14390-1993 Test method for flexural strength of high performance ceramics at elevated temperature
GB 6569-1986 Testing method for flexural strength of high performance ceramics
GB/T 39826-2021 Fine ceramics—Determining flexural bond strength—Four-point bending method
GB/T 1965-1996 Test method for cross-bending strength of porous ceramics
GB/T 37781-2019 Test methods for bending strength of glass

未注明发布机构

FORD FLTM BS 005-1-2000 FLEXURAL STRENGTH OF PAPER BOARD

Professional Standard - Chemical Industry

HG/T 3844-2008 Ebonite-Determination of cross breaking strength

Group Standards of the People's Republic of China

T/CSEB 0002-2018 Testing method for determining dynamic bending strength of rock materials by the Semi-circular Bending specimen
T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural

Professional Standard - Aviation

HB 5295-1984 High Strength Alloy Cantilevered Bending Pre-crack Specimen - Kiscc Test Method

Professional Standard - Building Materials

JC/T 676-1997 Test method for flexure of glass material

Professional Standard - Automobile

QC/T 637-2000 Test method for endurance bending strength of automotive engines crank shaft

Professional Standard - Aerospace

QJ 2199-1991 Test method for flexural strength of rigid foamed plastics

Engineering Sciences Data Unit (ESDU)

ESDU 71027 A-2013 Endurance of high strength steels (in bending)
ESDU 71027 A-1974 Endurance of high strength steels (in bending).
ESDU 90002 C-2001 Struts: strength under flexural@ local and inter-rivet buckling.
ESDU 90002 B-1994 STRUTS: STRENGTH UNDER FLEXURAL@ LOCAL AND INTER-RIVET BUCKLING

Czech Standards Institute (UNMZ)

CSN ON 49 0193-1967 Bending strenght
CSN 49 0117-1979 Wood. Impact strength in flexure
CSN 49 0115-1976 Wood. Determination of ultimate strength in flexure tests
CSN 49 0115-1979 Wood. Determination of ultimate strength in flexure tests
CSN 49 0147-1989 Tests of wood based panels. Method of apparent modulus of elasticity in bending and of bending strength determination

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 2.4.4.1A-1994 Flexural Strength of Laminates (at Elevated Temperature)
IPC TM-650 2.4.4B-1994 Flexural Strength of Laminates (at Ambient Temperature)

German Institute for Standardization

DIN 52362-1:1965 Bending test of particleboard to determine the bending strength
DIN EN 310:1993-08 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
DIN EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
DIN 51105 20100-08 High performance ceramics - Monolithic materials - Determination of nominal double ring bending strength
DIN 52189-1:1981-12 Testing of wood; Impact bending test; Determination of impact bending strength
DIN EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
DIN 52189-1:1981 Testing of wood; Impact bending test; Determination of impact bending strength
DIN EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method (ISO 22288:2006); English version of DIN EN ISO 22288:2009-04
DIN EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete; German version EN 1351:1997
DIN ISO 3327:1991-07 Determination of bending fracture strength of hard metals
DIN EN 14617-2 E:2015 Draft Document - Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending); German and English version FprEN 14617-2:2015
DIN EN 6061 E:1996 Draft Document - Aerospace series - Fibre reinforced plastics - Test method; determination of sandwich flexural strength, 4 point bending
DIN EN 6061 E:1996-04 Draft Document - Aerospace series - Fibre reinforced plastics - Test method; determination of sandwich flexural strength, 4 point bending

Society of Automotive Engineers (SAE)

SAE AMS3372A-1988 Silicone Resin, Elastomeric High Tear Strength Elevated Temperature Cure
SAE AMS3372B-2012 Silicone Resin, Elastomeric, High Tear Strength, Elevated Temperature Cure
SAE J2613_200909 Welded Flash Controlled, High Strength (500 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending
SAE AIR1418A Flexure Fatigue Strength of Tube Fitting Joints
SAE AIR1418 Flexure Fatigue Strength of Tube Fitting Joints
SAE AIR1418B Flexure Fatigue Strength of Tube Fitting Joints
SAE J2613_200210 Welded Flash Controlled, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending
SAE AIR1418-2011 FLEXURE FATIGUE STRENGTH OF TUBE FITTING JOINTS
SAE AIR1418A-2013 Flexure Fatigue Strength of Tube Fitting Joints
SAE AIR1418B-2020 Flexure Fatigue Strength of Tube Fitting Joints
SAE J2613-2002 Welded Flash Controlled, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending
SAE J2613-2017 Welded Flash Controlled, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending
SAE AIR1418A-1996 Flexure Fatigue Strength of Tube Fitting Joints
ADS TS356 Test for Electrical Connectors - Contact Bending Strength
SAE TS356-1 TS356 Test for Electrical Connectors Contact Bending Strength
SAE TS356-1-1987 TS356 Test for Electrical Connectors Contact Bending Strength
SAE J2833-2018 Welded and Cold-Drawn, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved Annealed for Bending and Flaring
SAE J2833-2009 Welded and Cold-Drawn, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved Annealed for Bending and Flaring
SAE J2832-2019 Welded Flash Controlled, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved Annealed for Bending and Double Flaring
SAE J2614_200909 Welded and Cold-Drawn, High Strength (500 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending and Flaring
SAE AMS3777/9B-1995 Tape, Nylon, Nonmelting, Reinforcing 2 (50) Wide, 3000 (13,345 N) Breaking Strength

Standard Association of Australia （SAA）

AS A106:1971 Method for the determination of the flexural strength of concrete flexure test specimens
AS A106:1957 Australian standard method for the determination of the flexural strength of flexure test specimens

Association Francaise de Normalisation

NF P19-105*NF EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete.
NF EN 310:1993 Wood-based panels - Determination of flexural modulus of elasticity and flexural strength
NF EN ISO 5402-2:2018 Leather - Determination of bending strength - Part 2: upper bending method
NF B51-124*NF EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength.
NF EN ISO 3327:2009 Hard metals - Determination of bending strength
NF B10-602-2*NF EN 14617-2:2016 Agglomerated stone - Test methods - Part 2 : determination of flexural strength (bending)
NF EN ISO 17707:2005 Footwear - Test methods for outsoles - Flexural strength
NF B51-008:2017 Wood - Static bending - Determination of ultimate strength in static bending using small clear specimens
NF EN ISO 5402-1:2022 Leather - Determination of bending strength - Part 1: flexometer method
NF ISO 3512:1993 High strength bent link transmission chains
NF EN ISO 10545-4:2019 Ceramic tiles and slabs - Part 4: determination of bending strength and breaking force
NF P19-829-4*NF EN 1170-4:1998 "Precast concrete products. Test method for glass-fibre reinforced cement. Part 4 : measuring bending strength, ""Simplified bending test"" method."

Indonesia Standards

SNI 15-4356-1996 Test Method for Flexural Strength of Refractory Materials at High Temperatures
SNI 12-0565-1989 Bending strength test of shoes
SNI ISO 16978:2010 Wood-based panels - Determination of modulus elasticity in bending and of bending strength
SNI ISO 10545-4:2010 Ubin keramik-Bagian 4: Penentuan kuat lentur dan beban lentur
SNI 6451:2015 Metode uji kuat lentur adukan semen hidraulik
SNI ISO 3133:2010 Wood - Determination of ultimate strength in static bending

American Association of State Highway and Transportation Officials

DIVISION I 9.17-1996 Flexural Strength (Interim 1997; Interim 1998)

American Gear Manufacturers Association

AGMA 21FTM19 Tooth Root Bending Strength of Shot-Peened Gears Made of High-Purity Steels up to the VHCF Range
91FTM7-1991 Low Cycle and Static Bending Strength of Carburized and High Hardness Through Hardened Gear Teeth
AGMA 91FTM7 Low Cycle and Static Bending Strength of Carburized and High Hardness Through Hardened Gear Teeth
AGMA 91FTM7-1991 Low Cycle and Static Bending Strength of Carburized and High Hardness Through Hardened Gear Teeth
AGMA 13FTM09-2013 Investigations on Tooth Root Bending Strength of Case Hardened Gears in the Range of High Cycle Fatigue
13FTM09-2013 Investigations on Tooth Root Bending Strength of Case Hardened Gears in the Range of High Cycle Fatigue
932-A05-2005 Rating the Pitting Resistance and Bending Strength of Hypoid Gears
AGMA 932-A05-2005 Rating the Pitting Resistance and Bending Strength of Hypoid Gears

Danish Standards Foundation

DANSK DS/EN 310:1993 Wood-based panels - Determination of modulus of elasticity in bending and bending strength
DS/EN 310:1994 Wood-based panels - Determination of modulus of elasticity in bending and bending strength
DS/EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
DS/EN 14617-2:2009 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
DS 1103.2:1976 Test methods for rigid flat sheets. Modulus of elasticity in bending and bending strength

GM North America

GM GMP.E/P.125-2002 Polyolefin Alloy High Impact, 550 MPa Flexural Modulus

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 16978:2009 Wood-based panels- Determination of modulus of elasticity in bending and of bending strength
OS GSO ISO 3348:2007 Wood - determination of impact bending strength
OS GSO ISO 1209-2:2015 Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity

GCC Standardization Organization

BH GSO ISO 16978:2024 Wood-based panels- Determination of modulus of elasticity in bending and of bending strength
GSO EN 310:2021 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
GSO ISO 16978:2009 Wood-based panels- Determination of modulus of elasticity in bending and of bending strength
GSO ISO 3348:2007 Wood - determination of impact bending strength
GSO ISO 1209-2:2015 Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
GSO ISO 9585:2016 Implants for surgery -- Determination of bending strength and stiffness of bone plates

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO EN 310:2022 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
BH GSO ISO 3348:2024 Wood - determination of impact bending strength
BH GSO EN 12390-5:2024 Testing hardened concrete - Part 5: Flexural strength of test specimens

British Standards Institution (BSI)

BS EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
BS EN 310:1993(1999) Wood - based panels — Determination of modulus of elasticity in bending and of bending strength
BS EN 14617-2:2016 Agglomerated stone. Test methods. Determination of flexural strength (bending)
BS EN ISO 75-3:2025 Plastics. Determination of temperature of deflection under load - High-strength thermosetting laminates and long-fibre-reinforced plastics
BS ISO 13765-4:2004 Refractory mortars - Determination of flexural bonding strength
BS EN 1533:2010 Wood flooring. Determination of bending strength under static load. Test methods
BS EN 10268:2006+A1:2013 Cold rolled steel flat products with high yield strength for cold forming. Technical delivery conditions
BS EN 10268:2006 Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions
BS EN 12390-5:2000 Testing hardened concrete - Flexural strength of test specimens
BS 3356:1990(1999) Method for Determination of bending length and flexural rigidity of fabrics
BS EN 12390-5:2019 Testing hardened concrete. Flexural strength of test specimens

European Committee for Standardization (CEN)

EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength
prEN 310-1992 Wood-based panels; determination of modulus elasticity, in bending and bending strength
EN 13335:2002 Leather - Physical and Mechanical Tests - Determination of Flex Resistance by the Vamp Flex Method
EN 10268:1998 Cold-Rolled Flat Products Made of High Yield Strength Micro-Alloyed Steels for Cold Forming - General Delivery Conditions Ratified European Text
EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
EN 10268:2006 Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions (Incorporates Amendment A1: 2013)
EN 993-7:1998 Methods of test for dense shaped refractory products - Part 7: Determination of modulus of rupture at elevated temperatures

Standards Norway

NS-EN 310:1993 Wood-based panels — Determination of modulus of elasticity in bending and of bending strength
NS 3277:1987 Particle boards — Test methods — Modulus of elasticity in bending and bending strength
NS 3252:1975 Test methods for rigid flat sheets — Modulus of elasticity in bending and bending strength
NS-EN 14617-2:2004 Agglomerated stone — Test methods — Part 2: Determination of flexural strength (bending)

Gosstandart of Russia

GOST 19921-1974 Glued and bent blanks. Method of determining ultimate strength in static bending
GOST 21153.6-1975 Rocks. Method for the determination of bend strength limit
GOST 255-1990 Ebonite. Determination of cross-breaking strength
GOST R 58527-2023 Wall materials. Methods for determination of ultimate compressive and bending strength
GOST 16483.3-1984 Wood. Method of static bending strength determination
GOST ISO 13765-4-2017 Refractory mortars. Determination of flexural bonding strength
GOST 26406-1984 Porcelain and faience ware. Method for determination of bending resistance
GOST R 57350-2023 Masonry. Method for determination of flexural strength
GOST 30271-1996 Paper and board. Determination of bending stiffness. Resonance method
GOST 8462-1962 Wall and facing materials. Methods for determining compressive and bending strengths
GOST 21284-2024 Bentonite clay for fine and building ceramics. Method for determining mechanical strength in bending

Lithuanian Standards Office

LST EN 310-1999 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
LST EN 14617-2-2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)

Spanish Association for Standardization (UNE)

UNE-EN 310:1994 WOOD-BASED PANELS. DETERMINATION OF MODULUS OF ELASTICITY IN BENDING AND OF BENDING STRENGTH.
AENOR UNE-EN 310:1994 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
UNE 83509:2004 CONCRETE WITH FIBERS. FLEXURE STRENGTH
UNE-ISO 1209-2:2011 Rigid cellular plastics. Determination of flexural properties. Part 2: Determination on flexural strength and apparent flexural modulus of elasticity
UNE 67037:1999 HOLLOW CLAY BLOCKS FOR FLOORS. FLEXURE STRENGHT TEST.

Korean Agency for Technology and Standards (KATS)

KS L 1591-1994 Testing method for flexural strength(modulus of rupture) of high performance ceramics
KS F 2566-2014 Standard test method for flexural performance of fiber reinforced concrete
KS L 1591-2013 Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramics at room temperature
KS L 1591-2008 Fine ceramics(advanced ceramics, advanced technical ceramics)-Test method for flexural strength of monolithic ceramics at room temperature
KS F 2566-2000 Test method for flexural toughness of steel fiber reinforced concrete
KS M ISO 1209-2-2012(2022) Rigid cellular plastics － Determination of flexural properties － Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
KS M ISO 1209-2-2022 Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
KS L ISO 17565-2006(2021) Fine ceramics(advanced ceramics, advanced technical ceramics)－Test method for flexural strength of monolithic ceramics at elevated temperature
KS K 0539-2010 Determination of flexural stiffness of fabrics: Flexometer method

Bureau of Indian Standards

IS 17611-2021 Reinforcement fabrics -- Determination of conventional flexural stiffness -- Fixed-angle flexometer method

Swedish Institute for Standards

SIS SS 83 10 16-1989 Gutters - Determination of bending strength
SS-EN 310:1993 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
SIS 23 51 06-1964 Fibre building boards. Determination of bending strength
SIS SS 13 73 08-1982 Autoclaved aerated concrete - Determination of bending strength
SS-EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete

American Society for Testing and Materials (ASTM)

ASTM C1684-18(2023) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength
ASTM D7914/D7914M-21 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM C1161-02c(2008) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM C1899-21 Standard Test Method for Flexural Strength of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
ASTM C1495-16 Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
ASTM C1495-16(2023) Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
ASTM C880/C880M-18e1 Standard Test Method for Flexural Strength of Dimension Stone
ASTM C1499-19(2024) Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
ASTM D7914/D7914M-14 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations

Aerospace, Security and Defence Industries Association of Europe (ASD)

ASD-STAN prEN 6061:1970 Fibre reinforced plastics - Test method - Determination of sandwich flexural strength 4 point bending
PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)

National Standardisation Body (ASRO)

STAS SR EN 310-1996 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
STAS 9966-1974 HARDBOARD Determination of static bending slrength
STAS 4740-1989 Board and paperboard BENDING RESISTANCE DETERMI- NATION OF LOAD AND BENDING ANGLE
STAS 337/1-1988 WOOD Delermination of ultimatc strcngh in static bending

Austrian Standards

ONORM EN 310-1993 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
ONORM B 4650 Teil.7-1980 Steel structures; buckling of spherical Shells
ONORM B 4650 Teil.4-1977 Steel structures; buckling of circular cylindrical Shells

Ente Nazionale Italiano di Unificazione

UNI 9070:1994 Paper and board. Determination of resistance to bending.
UNI EN 310:1994 Wood-based panels. Determination of modulus of elasticity in bending and bending strength.
UNI EN ISO 5402:2004 Leather - Physical and mechanical tests - Determination of flex resistance by flexometer method
UNI 9070:2010 Paper and board - Determination of resistance to bending
UNI EN ISO 5402-1:2017 Leather - Determination of flex resistance - Part 1: Flexometer method
UNI ENV SPERIMENTALE 820-1:1994 Advanced technical ceramics. Monolithic ceramics. Thermo-mechanical properties. Determinatiion of flexural strenght at elevated temperatures.
UNI SPERIMENTALE 4623:1960 Refractories. Testing cold flexural strength.
UNI ISO 3133:1985 Wood. Determination of ultimate strength in static bending.
UNI EN 12808-3:2003 Grouts for tiles - Determination of flexural and compressive strength
UNI EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
UNI EN 14617-2:2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
UNI 10443:1995 Composite stones. Determination of the bending resistance.

Türk Standardları Enstitüsü

TS 2808-1977 EBONITE - Determination Of Cross - Breaking Strength
TS 2477-1976 Wood - Determination of Impact Bending Strength

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4266.5(Int):2001 Reconstituted wood-based panels - Methods of test - Modulus of elasticity in bending and bending strength
AS/NZS 4266.5:2004/AMD 1:2006 Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength
AS/NZS 4266.5:2004(R2006) Reconstituted wood-based panels - Methods of test Method 5: Modulus of elasticity in bending and bending strength

International Organization for Standardization (ISO)

ISO 2077-1979/Amd 1:1980 Determination of flexural strength of pure expanded cork boards when bent
ISO 3348:1975 Wood; Determination of impact bending strength
ISO 1209-2:2004 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
ISO 17565:2003 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at elevated temperature
ISO 5402-2:2015 Leather - Determination of flex resistance - Part 2: Vamp flex method
ISO 21712:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural bond strength of ceramics
ISO 9585 Implants for surgery - Determination of bending strength and stiffness of bone plates
ISO 9585:1990 Implants for surgery; determination of bending strength and stiffness of bone plates

Magyar Szabványügyi Testület

MSZ 1265-1960 high speed bending
MSZ 1273-1960 high speed bending
MNOSZ 1247-1950 high speed bending
MSZ 1260-1960 high speed bending

Polski Komitet Normalizacyjny (PKN)

PN C04243-1972 Plastics Determination of bending strength using a Dynstat type apparatus

Japanese Industrial Standards Committee (JISC)

JIS A 1106:1993 Method of test for flexural strength of concrete
JIS R 1604:1987 Testing Method for Flexural Strength (Modulus of Rupture) of High Performance Ceramics at Elevated Temperature
JSA JIS B 1759-2019 Estimation of tooth bending strength of cylindrical plastic gears
JIS B 1759:2019 Estimation of tooth bending strength of cylindrical plastic gears

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 3119-1993 Heavy weight concrete.Method for the determination of flexural strength
TCVN 4032-1985 Cements.Test methods of bending and compression strengths