Test center system

Test center system, Total:217 items.

The international standard classification for "Test center system" includes: Networking , Rectifiers. Convertors. Stabilized power supply , Energy and heat transfer engineering in general , Telecommunications in general , Measuring instruments , Sociology. Services. Company organization and management. Administration. Transport , Tobacco, tobacco products and related equipment , Metrology and measurement in general .

The Chinese standard classification for "Test center system" includes: Telecommunication power supply equipment , Technical management , Basic standards and general methods , Measuring tool and instrument , Supply and Use Relation , Tobacco curing in general , Crime judging technology , Human Engineering .

工业和信息化部

YD/T 3983-2021 Technical requirements and test methods for power usage efficiency of liquid cooling server system of data center
YD/T 3982-2021 Technical requirements and test methods for cooling liquids of data center liquid cooling systems
YD/T 4068-2022 sting method for security system of IPv4-IPv6 service interoperability exchange cen based on cloud computing technology
YD/T 3981-2021 Technical requirements and test methods for spray liquid cooling server system of data center
YD/T 4024-2022 General technical requirements and test methods for liquid cooling server system of data center
YD/T 4023-2022 Power usage effectiveness ( PUE ) test specification for micro module data center
YD/T 3885-2021 Test methods for VXLAN of data center switches
YD/T 3984-2021 Test specification for micro modular data center
YD/T 3979-2021 Technical requirements and test methods for immersion liquid cooling server system of data center
YD/T 3980-2021 Technical requirements and test methods for cold plate liquid cooling server system of data center
JB/T 13812-2020 Machining centers-Performance test method

Group Standards of the People's Republic of China

T/CCSA 326-2021 Test method of general server in data center
T/CCSA 269-2019 General technical requirements and test methods for liquid cooling server system of data center
T/CCSA 270-2019 Technical requirements and test methods for cold plate liquid cooling server system of data center
T/CAR 9.2-2021*T/CAR 9.1-2021 Data Center Cooling System
T/SHSIC 0101-2023 Intelligent computing center computing power performance evaluation test method
T/CCSA 244-2019 SDN Test Standard for Technical Competency of Banking Datacenter Cloud
T/CCSA 274-2019 Technical requirements and test methods for cooling liquids of data center liquid cooling systems
T/CCSA 267-2019 Test specification for micro modular data center
T/ZZAS 030-2023 Vertical and horizontal integrated machining center
T/CA 307-2023 Technical requirements and testing specifications for fluorocarbon coolant in data center immersion liquid cooling systems
T/CASME 1439-2024 Specification for acoustic design of noise reduction in sports center
T/CCSA 273-2019 Technical requirements and test methods for power usage efficiency of liquid cooling server system of data center
T/CAR 9.2-2021 T/CAR 9.1-2021 Data Center Cooling System
T/CCSA 268-2019 Power usage effectiveness ( PUE ) test specification for micromodel data center
T/CECIA 01.1~01.3-2018 Enterprise Mental Health Promotion System
T/CCSA 266-2019 Test specification for SSD of data centers
T/INFOCA 001-2021 Identification rule for information consumption experience center
T/TJFM 001-2020 Intellectual Property Protection Center Service Standard System
T/CCAGM 004-2021 Key performance indicator system of department store and shopping mall
T/CSBM 0014-2021 Test methods for in vitro pulsatile durability testing of cardiac occluder
T/QGCML 2055-2023 Call center management system
T/AI 118.2-2022 Artificial intelligence computing centre Part 2：Test approaches
T/CCSA 265-2019 Test specification for HDD of data centers
T/DZJN 43-2021 Calculation of energy efficiency ratings and test methods for data centers
T/SHSIC 0202-2023 Data center immersed liquid cooling system individual coolant technical indicators and test methods
T/ZSX 5-2024 Star-rating index for community (village) the Party and the Masses service center
T/CCSA 463-2023 Artificial intelligence computing centre technology specification
T/CCSA 271-2019 Technical requirements and test methods for spray liquid cooling server system of data center
T/INFOCA 001-2020 Management specification for information consumption experience centre
T/CCSA 272-2019 Technical requirements and test methods for immersion liquid cooling server system of data center

Professional Standard - Post and Telecommunication

YD/T 2659-2013 Test method for Internet monitoring system in interconnection and interworking control center of national communications network
YD/T 4411-2023 Test methods for server in immersion cooling datacenter
YD/T 1500-2006 Testing Methods of Multimedia Messaging Service Center in Digital Cellular Mobile Telecommunication Network
YD/T 4414-2023 Technical requirements and testing methods of data center storage array
YD/T 4415-2023 Test specifications of cloud computing data center servers
YD/T 2543-2024 Data Center Energy Consumption Testing and Evaluation Method
YD/T 4628-2023 Technical code for commissioning and verification of data centerinfrastructure
YD/T 1818-2018 Power supply system for telecommunication data center
YD/T 4881-2024 Data Center Energy Management System Test Method

国家铁路局

TB/T 3536-2018 Test specification for train control center
TB/T 3535-2018 Test specification for radio block center system

Zhejiang Provincial Standard of the People's Republic of China

DB3311/T 30-2014 Forest Rehabilitation Hospital Construction Guide
DB3304/T 016-2018 Public library central library-main branch library service system construction management specification

Anhui Provincial Standard of the People's Republic of China

DB34/T 4073-2021 Evaluation System of Smart Intravenous Drug Dispensing Center

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 37779-2019 Implementation guidance for energy management system in data centers

Shanxi Provincial Standard of the People's Republic of China

DB14/T 1921-2019 Guidelines for the Construction of Standard System of Government Service Center

Fujian Provincial Standard of the People's Republic of China

DB35/T 951-2013 Administrative Service Center Standard System and Compilation Rules

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 44078-2024 Determination of optical center distance in photoelectric system—Low coherence interferometry
GB/T 32170.2-2015 Guide to standardization of administrative service centre—Part 2: Standard system
GB 15160-1994 Land mobile communication system requirements using multi-channel access techniques without a central controller
GB/T 15160-2007 Land mobile communication system requirements using multi-channel access techniques without a central controller
GB 50579-2010 Code of design for physical and chemical testing center of aviation industry
GB/T 22097-2008 Gear measuring center

Professional Standard - Tobacco

YC/T 324-2009 Web services operation for data center exchange service system of tobacco industry

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 3883-2020 Cardiopulmonary exercise tester respiratory system general test specification

Taiwan Provincial Standard of the People's Republic of China

CNS 1241-2005 Method of test for measuring thickness of concrete elements using drilled concrete cores

Professional Standard - Public Safety Standards

GA　544-2005 General technical specification for multi-channel psychological test system
GA/T 2003-2022 Polygraph testing-Subject structure of hierarchical approach
GA/T 544-2021 General specifications for polygraph system
GA 544-2005 General specification for polygraph system

Beijing Provincial Standard of the People's Republic of China

DB11/T 2048-2022 Service Specifications for Information Consumption Experience Center

Professional Standard - Electricity

DL/T 575.6-1999 Ergonomic principles for the design of control centres Part 6 : Principles of control centres arrangement

Military Standard of the People's Republic of China-General Armament Department

GJB 7096.2-2010 Standard conformance testing methods for software communication architecture.Part 2:Core framework

Shandong Provincial Standard of the People's Republic of China

DB3716/T 68.6-2024 "Safe City" Construction Indicator System Part 6: Peace of Mind

PL-PKN

PN M53421-1961 Measuring Instruments Bench Testing Centres

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 164.1-2008 Method of Test for Residential Central-System Humidfiers

ZA-SANS

ARP 065-2007 Test and fitment centres for airbags

Korean Agency for Technology and Standards (KATS)

KS X 4151-2-2020 Energy efficiency monitoring system for data center — Part 2: Holistic view of energy efficiency
KS X 4151-2-2015(2020) Energy efficiency monitoring system for data center — Part 2: Holistic view of energy efficiency
KS B 4404-2003 TEST CODE FOR PERFORMANCE AND ACCURACY OF MACHINING CENTERS
KS B 4404-2008 TEST CODE FOR PERFORMANCE AND ACCURACY OF MACHINING CENTERS
KS C 2623-2014 Hospital Grade Earth Centerbody and Terminals
KS X 4151-2-2015 Energy efficiency monitoring system for data center — Part 2: Holistic view of energy efficiency
KS P ISO 15197:2017 In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
KS C 2623-1981 Hospital Grade Earth Centerbody and Terminals
KS T 1333-2012 Packaging－Complete, filled transport packages－Test methods for the determination of the center of gravity of a package
KS P ISO 18242-2023 Cardiovascular implants and extracorporeal systems — Centrifugal blood pumps
KS P ISO 18242:2018 Cardiovascular implants and extracorporeal systems — Centrifugal blood pumps
KS C 2623-1981(2011) Hospital Grade Earth Centerbody and Terminals
KS B 4408-2012 test code for performance and accuracy of machining centers (vertical type)

British Standards Institution (BSI)

BS ISO 18322:2017 Space systems. General management requirements for space test centres
BS M 66:1987 Specification for dimensions of 'Q' clamps (centre-mounted clamps) for fluid systems
BS EN 17125:2018 Domestic spas/whirlpool spas/hot tubs. Safety requirements and test methods
BS ISO 13674-1:2023 Road vehicles. Test method for the quantification of on-centre handling - Weave test
BS ISO 13674-2:2016 Road vehicles. Test method for the quantification of on-centre handling. Transition test
BS ISO 10791-10:2022 Test conditions for machining centres. Evaluation of thermal distortions
BS ISO 10791-3:1998 Test conditions for machining centres. Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis)
BS ISO 18242:2016+A1:2023 Cardiovascular implants and extracorporeal systems. Centrifugal blood pumps
BS EN 61280-1-3:2010 Fibre optic communication subsystem test procedures - General communication subsystems - Central wavelength and spectral width measurement
BS EN ISO 15197:2015 In vitro diagnostic test systems. Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
BS ISO 10791-2:2023 Test conditions for machining centres. Geometric tests for machines with vertical spindle (vertical Z-axis)

Association Francaise de Normalisation

NF ISO 8479:1988 Aeronautics and space - Center clamps for fluid systems - Dimensions
NF P90-329*NF EN 17125:2018 Domestic spas/whirpool spas/hot tubs - Safety requirements and test methods
NF EN ISO 18295-1:2017 Customer Contact Centers – Part 1: Customer Contact Center Requirements
NF S92-026*NF EN ISO 15197:2015 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
NF EN ISO 11064-7:2006 Ergonomic design of command centers - Part 7: principles for evaluating command centers
NF X35-400-6*NF EN ISO 11064-6:2005 Ergonomic design of control centres - Part 6 : environmental requirements for control centres
NF L46-212*NF ISO 8479:1988 Aerospace. "Q clamps" (centre-mounted clamps) for fluid systems. Dimensions.
NF EN ISO 11064-6:2005 Ergonomic design of command centers - Part 6: environmental requirements for command centers
NF X35-400-1*NF EN ISO 11064-1:2001 Ergonomic design of control centres - Part 1 : principles for the design of control centres
NF X11-685:1983 Analysis of centrifugal sedimentation particles in liquids at rest relative to the centrifugal axis
NF EN ISO 11064-1:2001 Ergonomic Design of Command Centers - Part 1: Principles for Command Center Design
NF E60-172-7*NF ISO 10791-7:2020 Test conditions for machining centres - Part 7 : accuracy of finished test pieces

CZ-CSN

CSN 66 8102 Cast.26-1997 Smokeless powder. Test Methods. Testing Center
CSN IEC 233:1994 Tests on hollow insulators for use in electrical equipment
CSN 01 5252-1988 Mutually delivered products quality as-sessment and certiíication systém Documcnt on the results of testing labora-tory (center) assessment and testimony on testing laboratory (center) accreditation The lay-out of forms and the way of filling in
CSN 24 3301-1975 Fixing centres and centre punch marks for fixing (solid). Technical regulations

Standard Association of Australia （SAA）

AS 2201.2:2004 Intruder alarm systems - Monitoring centres

US-FCR

FCR FED H-18-3 700-3-1987 ENERGY CENTER - GENERAL ARRANGEMENT
FCR AF AFI AFMC 21-119-2000 OBJECTIVE CENTER/TEST WING AIRCRAFT MAINTENANCE MANAGEMENT POLICY

International Organization for Standardization (ISO)

ISO 18242:2016/DAmd 1 Cardiovascular implants and extracorporeal systems — Centrifugal blood pumps — Amendment 1: Worst-case conditions for testing
ISO 18242:2016/Amd 1:2011 Cardiovascular implants and extracorporeal systems — Centrifugal blood pumps — Amendment 1: Worst-case conditions for testing
ISO 18242:2016/FDAmd 1 Cardiovascular implants and extracorporeal systems — Centrifugal blood pumps — Amendment 1: Worst-case conditions for testing
ISO 18322:2017 Space systems — General management requirements for space test centres
ISO 9608:1994 V-belts - Uniformity of belts - Test method for determination of centre distance variation
ISO 18242:2016/Amd 1:2023 Cardiovascular implants and extracorporeal systems — Centrifugal blood pumps — Amendment 1: Worst-case conditions for testing

SE-SIS

SIS SS IEC 233:1984 Insulators — Tests ort hollow insulators for use in electrical equipment
SIS SS-ISO 5748:1991 Pliers and nippers — End cutting nippers — Dimensions and test values

German Institute for Standardization

DIN EN 17125:2019 Domestic spas/whirlpool spas/hot tubs - Safety requirements and test methods
DIN EN 17125:2019-06 Domestic spas/whirlpool spas/hot tubs - Safety requirements and test methods; German version EN 17125:2018
DIN EN ISO 11064-7 Berichtigung 1:2006-10 Ergonomic design of control centres - Part 7: Principles for the evaluation of control centres (ISO 11064-7:2006); German version ISO 11064-7:2006, Corrigenda to DIN EN ISO 11064-7:2006-08
DIN EN ISO 11064-1:2001-08 Ergonomic design of control centres - Part 1: Principles for the design of control centres (ISO 11064-1:2000); German version EN ISO 11064-1:2000
DIN EN ISO 11064-7:2006-08 Ergonomic design of control centres - Part 7: Principles for the evaluation of control centres (ISO 11064-7:2006); German version ISO 11064-7:2006
DIN 15024:1968-10 Cranes and serial lifting appliances, track gauges (center to center) for double girder crabs
DIN EN ISO 11064-6:2005-10 Ergonomic design of control centres - Part 6: Environmental requirements for control centres (ISO 11064-6:2005); German version EN ISO 11064-6:2005
DIN 15024:1968 Cranes and serial lifting appliances, track gauges (center to center) for double girder crabs

CEN - European Committee for Standardization

EN 17125:2018 Domestic spas/whirlpool spas/hot tubs - Safety requirements and test methods

SCC

NS-EN 17125:2018 Domestic spas/whirlpool spas/hot tubs — Safety requirements and test methods
DANSK DS/EN 17125:2018 Domestic spas/whirlpool spas/hot tubs – Safety requirements and test methods
BS ISO 13674-1:2003 Road vehicles. Test method for the quantification of on-centre handling-Weave test
CAN/CSA-ISO 15197:2005(R2010) In Vitro Diagnostic Test Systems - Requirements for Blood-Glucose Monitoring Systems for Self-Testing in Managing Diabetes Mellitus
NS-EN 14736:2004 Space product assurance — Quality assurance for test centres
DANSK DS/EN ISO 11064-7:2006 Ergonomic design of control centres - Part 7: Principles for the evaluation of control centres
CEI UNI EN 50518/A1:2021 Monitoring and alarm receiving center
AENOR UNE 26283-1:1985 Wheel tie-down. Type with wheel centering through the central hole. Assembly measurements.
DANSK DS/EN ISO 11064-1:2001 Ergonomic design of control centres - Part 1: Principles for the design of control centres
DANSK DS/ISO 18242:2016 Cardiovascular implants and extracorporeal systems – Centrifugal blood pumps
DANSK DS/ISO 18242/AMD 1:2016 Cardiovascular implants and extracorporeal systems – Centrifugal blood pumps
DANSK DS/EN ISO 11064-6:2005 Ergonomic design of control centres - Part 6: Environmental requirements for control centres
NS 1212:1964 Testing of textile goods — Color fastness test — Determination of sweat fastness
AWWA WSP57716 Creating a Customer Focused Culture Through Benchmarking
ETSI TS 186 010-2-2017 Core Network and Interoperability Testing (INT); Conference (CONF) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance test specification (3GPP Release 10); Part 2: Test Suite Structure and Test Purposes (TSS&TP)
CEI EN 61280-1-3:2011 Fibre optic communication subsystem test procedures Part 1-3: General communication subsystems - Central wavelength and spectral width measurement
DANSK DS/EN 61280-1-3:2010 Fibre optic communication subsystem test procedures – Part 1-3: General communication subsystems – Central wavelength and spectral width measurement
CEI UNI EN 50518:2021 Monitoring and alarm receiving center
VDI 3860 BLATT 2-2019 Measuring landfill gas — measurements in the gas detection system

Spanish Association for Standardization (UNE)

UNE-EN 17125:2021 Domestic spas/whirlpool spas/hot tubs - Safety requirements and test methods

IN-BIS

IS 1734 Pt.15-1983 Test Methods for Plywood Part 15 Center Load for Board Tests

ISA - International Society of Automation

ISA RP60.3-1985 Human Engineering for Control Centers

GOST

GOST R 70580-2022 Space systems and complexes. Мission control center. General requirements

Japanese Industrial Standards Committee (JISC)

JIS C 61280-1-3:2010 Fiber optic communication subsystem test procedures -- Central wavelength and spectral width measurement
JIS T 0403:2018 Method for in vitro thrombogenicity testing for inflow cannula of left ventricular assist system
JIS C 2808:1993 Hospital grade earth centerbodies and terminals

American National Standards Institute （ANSI)

ANSI/ASHRAE 125-2020 Method of Testing Thermal Energy Meters for Liquid Streams in HVAC Systems
ANSI/ASHRAE 164.1-2012 Method of Test for Residential Central-System Humidifiers
ANSI/AAMI/ISO 18242:2016 Cardiovascular implants and extracorporeal systems— Centrifugal blood pumps

SG-SPRING SG

SS 308 Pt.3-1988 Quality Systems Part 3 : Specification For Quality Assurance En Final Inspection And Test [ISO title : Quality systems - Model for quality assurance in final inspection and test]

GSO

BH GSO ISO 15197:2015 In vitro diagnostic test systems -- Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
OS GSO ISO 15197:2014 In vitro diagnostic test systems -- Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
GSO ISO 10791-7:2013 Test conditions for machining centres -- Part 7: Accuracy of a finished test piece
OS GSO IEC 61280-1-3:2014 Fibre optic communication subsystem basic test procedures - Part 1-3: Test procedures for general communication subsystems - Central wavelength and spectral width measurement
BH GSO ISO 18242:2022 Cardiovascular implants and extracorporeal systems — Centrifugal blood pumps
OS GSO ISO 11064-7:2015 Ergonomic design of control centres -- Part 7: Principles for the evaluation of control centres
GSO ISO 18242:2021 Cardiovascular implants and extracorporeal systems — Centrifugal blood pumps
OS GSO ISO 11064-6:2015 Ergonomic design of control centres -- Part 6: Environmental requirements for control centres
GSO ISO 11064-7:2015 Ergonomic design of control centres -- Part 7: Principles for the evaluation of control centres
BH GSO ISO 11064-7:2017 Ergonomic design of control centres -- Part 7: Principles for the evaluation of control centres
GSO IEC 61280-1-3:2014 Fibre optic communication subsystem basic test procedures - Part 1-3: Test procedures for general communication subsystems - Central wavelength and spectral width measurement
BH GSO ISO 8479:2017 Aerospace -- "Q" clamps (centre-mounted clamps) for fluid systems -- Dimensions
GSO ISO 8479:2016 Aerospace -- "Q" clamps (centre-mounted clamps) for fluid systems -- Dimensions
OS GSO ISO 8479:2016 Aerospace -- "Q" clamps (centre-mounted clamps) for fluid systems -- Dimensions

GB-REG

REG NASA-LLIS-1399-2003 Lessons Learned ?Program and Project Management: Center-to-Center Relations

HU-MSZT

MSZ 700/36.lap-1961 Semiconductor testing experiments in coal mines

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std 1450.6.2-2014 IEEE Standard for Memory Modeling in Core Test Language

Danish Standards Foundation

DS/EN 14736:2004 Space product assurance - Quality assurance for test centres
DS/EN ISO 15197:2013 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
DS/EN ISO 11064-7:2006 Ergonomic design of control centres - Part 7: Principles for the evaluation of control centres
DS/EN ISO 11064-1:2001 Ergonomic design of control centres - Part 1: Principles for the design of control centres
DS 2390:1993 Centre holes 90 degree. Determination fo dimensions
DS 2389:1993 Centre holes 60 degree. Determination of dimensions

Lithuanian Standards Office

LST EN 14736-2004 Space product assurance - Quality assurance for test centres

KR-KS

KS P ISO 15197-2017 In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
KS P ISO 18242-2018 Cardiovascular implants and extracorporeal systems — Centrifugal blood pumps
KS P ISO 15197-2017(2022) In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
KS P ISO 18242-2018(2023) Cardiovascular implants and extracorporeal systems — Centrifugal blood pumps

GOSTR

PNST 336-2018 Russian system of quality. Comparative testing of sprats in oil

RU-GOST R

GOST R 51563-2000 Liquid centrifugal separators. Safety requirements. Test methods
GOST R 50289-1992 Hollow insulators for use in electrical equipment. Test methods
GOST R ISO 15197-2015 In vitro diagnostic test systems. Requirements for blood glucose monitoring systems for self-testing in managing diabetes mellitus

Malaysia Standards

MS 961-1985 Method for testing water and sediment in fuel using centrifuge

Association of German Mechanical Engineers

DVS 1191-1986 Training and testing of welding experts; DVS training center directory
DVS 1191-1988 Training and testing of welding experts; DVS training center directory
DVS 1191-1991 Training and testing of welding experts; DVS training center directory
DVS 1191-1987 Training and testing of welding experts; DVS training center directory
DVS 1191-1990 Training and testing of welding experts; DVS training center directory
DVS 1191-1989 Training and testing of welding experts; DVS training center directory
DVS 1191-1992 Training and testing of welding experts; DVS training center directory

CENELEC - European Committee for Electrotechnical Standardization

EN 61280-1-3:1999 Fibre Optic Communication Subsystem Basic Test Procedures Part 1-3: Test Procedures for General Communication Subsystems Central Wavelength and Spectral Width Measurement

US-HI

HI 1.6-2000 Centrifugal Pump Tests

Canadian Standards Association (CSA)

CAN/CSA-ISO/IEC TR 20913:2018 Information technology — Data centres — Guidelines on holistic investigation methodology for data centre key performance indicators

American Society for Testing and Materials (ASTM)

ASTM C1667-15 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels

VDI - Verein Deutscher Ingenieure

VDI 3860 Blatt 2-2006 Measurement of landfill gas - Measurements in the gas collection system

ETSI - European Telecommunications Standards Institute

TS 186 010-2-2017 Core Network and Interoperability Testing (INT); Conference (CONF) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance test specification; (3GPP Release 12); Part 2: Test Suite Structure and Test Purposes (TSS&TP) (V4.1.1)
TS 186 010-2-2015 Core Network and Interoperability Testing (INT); Conference (CONF) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance test specification Part 2: Test Suite Structure and Test Purposes (TSS&TP) (V3.2.1; 3GPP Release 10)

European Telecommunications Standards Institute (ETSI)

ETSI TS 186 010-2-2015 Core Network and Interoperability Testing (INT); Conference (CONF) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance test specification Part 2: Test Suite Structure and Test Purposes (TSS&TP) (V3.2.1; 3GPP Release 10)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE NY-08-002-2008 Monitoring Vibration at a Data Center