Ceramic quality at home and abroad

Ceramic quality at home and abroad, Total:353 items.

The international standard classification for "Ceramic quality at home and abroad" includes: Ceramic building products , Exploratory and extraction equipment , Advanced ceramics , Steels pipes and tubes for specific use , Measuring instruments , Watches .

The Chinese standard classification for "Ceramic quality at home and abroad" includes: Building sanitary ceramics , Petroleum drilling & production equipment and instrument , Ceramic and glass in general , Special electronic technology material , Special ceramics , Steel tube and cast iron pipe , Measuring tool and instrument , Technical Management , Horology .

Group Standards of the People's Republic of China

T/CBMF 223-2023 Assessment requirements for quality grading and forerunner—Large format porcelain board
T/GDC 121-2021 Far infrared and negative ion ceramic tiles(slab)
T/SDTC 001-2024 Shimmer texture ceramic tiles
T/SSM 12-2023 Determination of nonylphenol content in indoor ceramic tile beautifying agent by gas chromatography-mass spectrometry
T/FJBRAND 2-2023 Chinese ceramics—intangible cultural heritage—jian-ware
T/SDTC 001-2023 Zibo ceramics synthetic bone china
T/HGGZ 002-2023 silicone-modified adhesives for indoor ceramic plates
T/SXCAS 010-2022 Technical standards for the application of thermal insulation systems with built-in foam ceramic boards in the large formwork of building exterior walls
T/HMSAQS 001-2023 General quality and technical specifications for specialty ceramics
T/HNNMIA 29-2023 Heavy dense honeycomb ceramic thermal storage body
T/JMBX 0229-2022 High quality ceramic seal faucet
T/CASME 635-2023 Nanoceramic coated stainless steel vacuum cup
T/CBCSA 22-2020 Interior wall ceramic tiles
T/JDZCA 0001-2022 "Made in Jingdezhen" ceramic technology requires daily hard porcelain
T/CECS 877-2021 Technical specification for the application of foamed ceramic exterior wall panels
T/KPSNXH 001-2022 High-quality copper alloy ceramic sheet sealing faucet
T/FSS 98-2023 Foshan Standard Polishing machine for the porcelain tiles
T/HSSX 0001-2022 Insulating Ceramic Bricks for Outdoor Buildings
T/CSIQ 3002-2015 Artwork authentication quality traceability verification procedures ceramics
T/JDZCA 0008-2023 Ceramic artwork authentication quality traceability verification procedures
T/HSSYJ 0008-2022 High Quality Copper Alloy Faucet with Ceramic Cartridge
T/JDZCA 0007-2023 Ceramic Art Authentication Quality Traceability Certification Regulations
T/HPAAIA 52001-2020 Technical standard forengineering of external thermal insulation composite system based on ceramic wool
T/QGCML 144-2021 Ladle Lining Gunning Ceramic Welding Consumables
T/NXSCJS 016-2020 Specification for Measurement of Ancient Ceramics
T/SDQE 012-2019 Taishan quality zirconium ceramic fiber blanket
T/CSIQ 3001-2015 Quality Traceability Certification Regulations for Artwork Appraisal Ceramics
T/CNTAC 108-2022 Restricted substance requirements for textiles worldwide
T/CBCSA 23-2020 Exterior wall ceramic wall

Professional Standard - Construction Industry

JG/T 484-2015 General Technical Requirements for Indoor and Outdoor Ceramic Wall and Floor Tiles

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33500-2017 External wall insulation foam ceramic

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 4100.1-1999 Dry-pressed ceramic tiles--Part 1:Porcelain tiles$(E≤0.5%)
GB/T 32978-2016 Silicon carbide high temperature ceramic filter element
GB/T 4100.5-1999 Dry pressed ceramic tiles-Part 5:Fine earthenware tiles( E＞10%)
GB/T 5596-1996 Ceramic dielectric materials used for capacitors
GB/T 44335-2024 Fine ceramics—Methods of test for coatings—Determination of internal stress in ceramic coatings by application of the Stoney formula
GB/T 42350-2023 Fly ash ceramic tiles
GB/T 43505-2023 Ceramic lined tubing

Professional Standard - Building Materials

JC/T 2347-2015 Ceramic mould for gloves
JC/T 1095-2009 Light - ceramic tile
JC/T 2151-2012 Test method for ceramic whiskers morphology
JC/T 2173-2013 Ceramic tube for preheater of cement kiln system
JC/T 2137-2012 Infrared radioactive honeycomb ceramic burner-plate

Hebei Provincial Standard of the People's Republic of China

DB13/T 1647-2012 Far Infrared Ceramic Beads

Military Standard of the People's Republic of China-General Armament Department

GJB 1973-1994 Specification for Class 2 ceramic dielectric powders for multilayer ceramic capacitors
GJB 9374-2018 Ceramic shell appearance inspection method

Professional Standard - Ferrous Metallurgy

YB/T 176-2000 Ceramic-lined steel composite pipe
YB/T 176 Ceramic Lined Composite Steel Pipe

Professional Standard - Machinery

JB/T 10743-2007 Ceramic gauge blocks

工业和信息化部

QB/T 4055-2017 Ceramic casings of watches
YB/T 176-2017 Ceramic-lined steel composite pipes

Professional Standard - Electron

SJ/T 9571.5-1995 Quality grading standard for piezoelectric ceramic buzzers
SJ/T 9571.1-1995 Quality grading standard for low-frequency piezoelectric ceramic resonators
SJ/T 10246-1991 A-Ceramic for microwave dielectric materials
SJ/T 10421-1993 Quality control pivot of production for high power ceramic transmitting tubes

Professional Standard - Light Industry

QB/T 4055.2-2011 Cermet casings of watches—Part 2:Carbide cermet casings
QB/T 4055.1-2010 Cermet casings of watches Part 1:Oxide cermet casings

Fujian Provincial Standard of the People's Republic of China

DB35/T 1155-2011 Dry pressed stone powder ceramic exterior wall tiles

Guangdong Provincial Standard of the People's Republic of China

DB44/T 997-2012 Ceramic Waste Recycling Heat Insulation Lightweight Environmentally Friendly Ceramic Bricks

Professional Standard - Commodity Inspection

SN/T 3614-2013 Risk assessment specification for import and export ceramic products quality

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 37214-2018 The requirements for external ceramic tiles

食品相关产品

GB 4806.4-2016 National Food Safety Standard- Ceramic ware

住房和城乡建设部

JG/T 567-2019 Low density and high strength ceramic panel for building

未注明发布机构

DIN EN 1457 Berichtigung 1:2006 Exhaust systems – ceramic inner pipes – requirements and tests
ASTM RR-C14-1003 2003 C1203-Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel

Taiwan Provincial Standard of the People's Republic of China

CNS 13315-1993 Implants for Surgery - Ceramic Materials Based on Alumina

Jiangsu Provincial Standard of the People's Republic of China

DB3210/T 1155-2023 Safety Production Guide for Ceramic Lined Composite Steel Pipes

SCC

BS 3402:1964 Quality of vitreous china sanitary applainces
UNE 67021:1978 CERAMICS. QUALITY CONTROL OF MANUFACTURE OF CERAMIC ELEMENTS OF FIRED EARTH FOR CONSTRUCTION
AENOR UNE 67021:1978 Ceramics. Quality control of manufacturing of fired earth ceramic elements for construction.
AENOR UNE 67022:1978 Ceramics. Sampling for statistical control in reception of the quality of ceramic products used in construction.
UNE 67022:1978 CERAMICS. SAMPLING OF STATISTICAL CONTROL IN RECEPTION OF QUALITY OF CERAMIC PRODUCTS USED IN CONSTRUCTION
BS 5503-2:1977 Vitreous china washdown WC pans with horizontal outlet-Materials, quality, performance and dimensions other than connecting dimensions
NS 1508:1969 Sanitary vitreous china — Quality and test requirements
AENOR UNE 67023:1978 Ceramics. Taking samples for statistical control in the factory of the quality of ceramic products used in construction.
DANSK DS/ISO 19674:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) – Methods of test for ceramic coatings – Determination of internal stress in ceramic coatings by application of the Stoney formula
DANSK DS/ISO 17139:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) – Thermophysical properties of ceramic composites – Determination of thermal expansion
UNE 67023:1978 CERAMICS. SAMPLING FOR STATISTICAL CONTROL IN THE FACTORY OF THE QUALITY OF CERAMIC PRODUCTS USED IN CONSTRUCTION
DANSK DS/EN ISO 17139:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) – Thermophysical properties of ceramic composites – Determination of thermal expansion (ISO 17139:2014)
NS-EN ISO 17139:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of thermal expansion (ISO 17139:2014)
DANSK DS/ISO 19629:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) – Thermophysical properties of ceramic composites – Determination of unidimensional thermal diffusivity by flash method
CAN/CGSB-1.76-M91-1991 Interior and Exterior Heat-Resistant Enamel
DIN EN ISO 17139 E:2022 Draft Document - Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of thermal expansion (ISO 17139:2014); German and English version prEN ISO 17139:2021
CAN/CGSB-1.76-2000 Interior and Exterior Heat-Resistant Enamel
11/30199626 DC BS ISO 11894-1. Fine ceramic (advanced ceramics, advanced technical ceramics). Test method for conductivity measurement of ion-conductive fine ceramics. Part 1. Oxide-ion-conducting solid electrolytes
DANSK DS/EN ISO 19629:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) – Thermophysical properties of ceramic composites – Determination of unidimensional thermal diffusivity by flash method (ISO 19629:2018)
DIN EN ISO 19674 E:2020 Draft Document - Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods of test for ceramic coatings - Determination of internal stress in ceramic coatings by application of the Stoney formula (ISO 19674:2017); German and English vers...
MIL MIL-PRF-19978/2D-1999 CAPACITORS, FIXED, PLASTIC (OR PAPER-PLASTIC) DIELECTRIC (HERMETICALLY SEALED IN CERAMIC OR GLASS CASES) STYLE CQ20 (SUPERSEDING MIL-C-19978/2C)
09/30186157 DC BS ISO 10677. Fine ceramics (advanced ceramics, advanced technical ceramics). Ultraviolet light source for testing semiconducting photocatalytic materials
BS DD ENV 821-3:1994 Advanced technical ceramics. Monolithic ceramics. Thermo-physical properties-Determination of specific heat capacity
CAN/CGSB-1.73-1997 Exterior and Interior Enamel for Floors
AWWA WQTC71491 Ceramic Membranes — Application in U.S. Water Treatment Industry
CAN/CGSB-1.73-M91-1991 Exterior and Interior Enamel For Floors
DIN EN ISO 19629 E:2021 Draft Document - Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of unidimensional thermal diffusivity by flash method (ISO 19629:2018); German and English version prEN IS...
DANSK DS/ISO 6474-1:2019 Implants for surgery – Ceramic materials – Part 1: Ceramic materials based on high purity alumina
AWWA WQTC65928 Low Cost Ceramic Membrane Filtration for Application in Developing Countries: The Ceramic Silver-Impregnated Pot Filter
BS DD ENV 725-2:1994 Advanced technical ceramics. Methods of test for ceramic powders-Determination of impurities in barium titanate
BS EN 725-1:1997 Advanced technical ceramics. Methods of test for ceramic powders-Determination of impurities in alumina
12/30212256 DC BS ISO 14605. Fine Ceramics (Advanced ceramics, advanced technical ceramics). Light source for testing semiconducting photocatalytic materials used under indoor lighting environment
BS DD ENV 1159-3:1995 Advanced technical ceramics. Ceramic composites. Thermophysical properties-Determination of specific heat capacity
BS DD ENV 1159-2:1994 Advanced technical ceramics. Ceramic composites. Thermophysical properties-Determination of thermal diffusivity
UNE 20543-9:1982 FIXED CAPACITOR OF CERAMIC DIELECTRIC, CLASS 2
BS 6431-10:1984 Ceramic floor and wall tiles-Method for determination of dimensions and surface quality
MIL MIL-C-11015F-2008 CAPACITORS, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE)
BS DD ENV 623-3:1993 Advanced technical ceramics. Monolithic ceramics. General and textural properties-Determination of grain size
BS PD ISO/PAS 24565:2022 Petroleum and natural gas industries. Ceramic lined tubing
NS-EN 821-3:2005 Advanced technical ceramics — Monolithic ceramics. Thermo-physical properties — Part 3: Determination of specific heat capacity
13/30246099 DC BS ISO 17094. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antibacterial activity of semiconducting photocatalytic materials under indoor lighting environment
NS-EN 821-1:1995 Advanced technical ceramics — Monolithic ceramics — Thermo-physical properties — Part 1: Determination of thermal expansion
DIN EN ISO 20323 E:2021 Draft Document - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of tensile properties of tubes (ISO 20323:2018); German and...
UNE 20543-8:1983 FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
DANSK DS/CEN/TS 1071-11:2005 Advanced technical ceramics - Methods of test for ceramic coatings - Part 11: Determination of internal stress by the Stoney formula
09/30184697 DC BS ISO 10678. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue

SE-SIS

SIS 82 20 01-1967 Sanitary- vitreous china. Quality and test requirements
SIS 82 20 02-1967 Sanitary vitreous china units. Inspection rules
SIS SS 82 20 11-1986 Sanitary appliances - Vitreous china - Test methods
SIS SS 82 20 12-1986 Sanitary appliances - Vitreous china and enamel coat - Inspection rules
SIS SS IEC 168:1984 Insulators — Indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V - Tests

CZ-CSN

CSN 34 8040-1981 Ceramic insulators. Quality of surface
CSN 72 5150-1975 Eartkenware tiles. Quality, shapes and dimensions
CSN 72 5162-1977 Ceramic mosaic. Quality, shapes and dimensions
CSN EN 98-1994 Ceramic floor and wall tiles.Determination of dimensions and surface quality
CSN 72 5180-1977 Raw fine-body earthenware tiles. Quality, shapes and dimensicms
CSN 35 8330-1972 Ceramie dielectric capacitors type l
CSN 35 8252-1974 Ceramic dielectric capacitors type 3
CSN 35 8250-1969 Ceramic dielectric capacitors type 2
CSN 72 5152 Zb-1991 Revision b. S/1991 Czech National Standard 72 5152 Quality, shape and specification of interior panels of glass tiles
CSN 72 5253-1978 Chemical rcsi.stant stoneware pipes and fittings. Quality, sshapes and dimenssions

Indonesia Standards

SNI 15-1147-1989 Hard fine harthen ware ceramic body mass
SNI 03-0579-1989 Chinesse vitreous type ceramic wash - basins
SNI 15-1851-1990 Dolomite for hard fine ceramic manufacture

United States Navy

NAVY MIL-C-81751 B-1972 COATING, METALLIC-CERAMIC
NAVY MIL-C-81751 B NOTICE 1-1996 COATING, METALLIC-CERAMIC
NAVY MIL-C-81751 B (1)-1994 COATING, METALLIC-CERAMIC
NAVY MS16119-1956 CAPACITORS, FIXED CERAMIC DIELECTRIC, TYPE CC90

British Standards Institution (BSI)

BS 3402:1969(2010) Specification for Quality of vitreous china sanitary appliances
BS 3402:1969 Specification for quality of vitreous china sanitary appliances
BS ISO 19674:2017 Fine ceramics (advanced ceramics, advanced technical ceramics). Methods of test for ceramic coatings. Determination of internal stress in ceramic coatings by application of the Stoney formula
BS ISO 20351:2017 Fine ceramics (advanced ceramics, advanced technical ceramics). Absolute measurement of internal quantum efficiency of phosphors for white light emitting diodes using an integrating sphere
BS ISO 11894-1:2013 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for conductivity measurement of ion-conductive fine ceramics. Oxide-ion-conducting solid electrolytes
BS ISO 19613:2018 Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement of viscosity of ceramic slurry by use of a rotational viscometer
BS ISO 6474-1:2010 Implants for surgery - Ceramic materials - Ceramic materials based on high purity alumina
BS ISO 10677:2011 Fine ceramics (advanced ceramics, advanced technical ceramics). Ultraviolet light source for testing semiconducting photocatalytic materials
BS ISO 21713:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of elastic modulus of ceramics at high temperature by thin wall C-ring method
BS ISO 20379:2018 Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement of thixotropic behaviour of ceramic slurry by use of a rotational viscometer
BS ISO 18550:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Testing method for macroheterogeneity in microstructure
19/30349557 DC BS ISO 21713. Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of elastic modulus of ceramics at high temperature by thin wall C-ring method
BS ISO 20343:2017 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining elastic modulus of thick ceramic coatings at elevated temperature
BS ISO 13915:2023 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for optical properties of ceramic phosphors for white light-emitting diodes with reference materials
BS ISO 19603:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining elastic modulus and bending strength of thick ceramic coatings
BS ISO 17859:2015 Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement method of piezoelectric strain at high electric field
BS ISO 18558:2015 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determining elastic modulus and bending strength of ceramic tube and rings
BS ISO 17561:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance
BS ISO 23738:2021 Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement method of spectral reflectance of fine ceramic thin films under humid conditions
BS ISO 19810:2017 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for self-cleaning performance of semiconducting photocatalytic materials under indoor lighting environment. Measurement of water contact angle
BS ISO 19587:2021 Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at elevated temperature in air atmospheric pressure. Determination of in-plane shear strength
BS ISO 17861:2014 Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement method of spectral transmittance of fine ceramics thin films under humid condition
20/30389596 DC BS ISO 23738. Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement method of spectral reflectance of fine ceramics thin films under humid condition
23/30456750 DC BS ISO 13915. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for optical properties of ceramic phosphors for white light-emitting diodes with reference materials
BS 4789:1972 Specification for ceramic components for use in envelopes for electronic tubes
BS ISO 19810:2023 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for self-cleaning performance of semiconducting photocatalytic materials under indoor lighting environment. Measurement of water contact angle
20/30351676 DC BS ISO 19587. Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at elevated temperature in air atmospheric pressure. Determination of in-plane shear strength
BS ISO 14605:2013 Fine ceramics (advanced ceramics, advanced technical ceramics). Light source for testing semiconducting photocatalytic materials used under indoor lighting environment
BS ISO 22278:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for crystalline quality of single-crystal thin film (wafer) using XRD method with parallel X-ray beam
DD CEN/TS 1071-11:2005 Advanced technical ceramics. Methods of test for ceramic coatings - Determination of internal stress by the Stoney formula
DD ENV 1007-1-1994 Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Determination of size content
BS ISO 4825-1:2023 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for thermal property measurements of metalized ceramic substrates - Evaluation of thermal resistance for use in power modules
BS EN 725-2:2007 Advanced technical ceramics - Methods of test for ceramic powders - Determination of impurities in barium titanate
PD ISO/PAS 24565:2022 Petroleum and natural gas industries. Ceramic lined tubing
BS EN 725-1:2007 Advanced technical ceramics - Methods of test for ceramic powders - Determination of impurities in alumina
BS EN 821-1:1995 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Determination of thermal expansion
BS EN ISO 22459:2022 Fine ceramics (advanced ceramics, advanced technical ceramics). Reinforcement of ceramic composites. Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature
BS ISO 17094:2014 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antibacterial activity of semiconducting photocatalytic materials under indoor lighting environment
20/30349837 DC BS ISO 21820. Fine ceramics (advanced ceramics, advanced technical ceramics). Ultraviolet photoluminescence image test method for analyzing polytypes of boron and nitrogen doped SiC crystals
BS ISO 21820:2021 Fine ceramics (advanced ceramics, advanced technical ceramics). Ultraviolet photoluminescence image test method for analysing polytypes of boron- and nitrogen-doped SiC crystals
BS EN 821-3:2005(2009) Advanced technical ceramics — Monolithic ceramics . Thermophysical properties — Part 3 : Determination of specific heat capacity
BS ISO 5712:2022 Fine ceramics (advanced ceramics, advanced technical ceramics). Method for measuring the power generation characteristics of piezoelectric resonant device for stand-alone power source
BS ISO 24448:2023 Fine ceramics (advanced ceramics, advanced technical ceramics). LED light source for testing semiconducting photocatalytic materials used under indoor lighting environment
BS ISO 10678:2010 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue

RO-ASRO

STAS 10501/1-1980 CERAMIC BLOCKS FOR WALLS Technical requirements for quality
STAS 6686-1980 Ceramic sanitarv appliances PORCELAINE APPLIANCES General technical rcquirements for quality
STAS 1541-1980 Ceramic sanitary appliances SEMI-PORCELAINE APPLIANCES= General technical requirements for quality
STAS 9521-1982 FIXED CAPACITORS OF CEKAMIC DIELECTRIC TYPE 1 General tehnical requirements tor quality
STAS 9507-1982 FIXED CAPACITORS OF CERAMIC DIELECTRIC TYPE 2 General technical requirements for quality
STAS 5963/1-1986 ACID-RESISTANT CERAMIC SANDSTONE RECIPIENTS General technical requirements for quality
STAS 3152-1989 Porcelain household and ornamental goods. General technical requirements for quality
STAS 9278-1976 FELDSPAR FOR FINE CERAMICS INDUSTRI General technical requirements for quality
STAS 10021-1975 CERAMIC DIELECTRIC CAPACIIORS OF TIIE PLVIE TYPE Dimensions
STAS 9216-1973 CLAY FOR FINE CERAMICS INDUSTRY General technical requirements for quality
STAS 9217-1976 KAOLIN FOR FINE CERAMICS INDUSTRY General technical requirements lor quality
STAS 6612/1-1987 GRAPHITE CERAMIC MINES FOR PENClIES WITH WOOD GASE General lechnical lequiremeni s

German Institute for Standardization

DIN 51178:2009 Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing
DIN EN ISO 19674:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods of test for ceramic coatings - Determination of internal stress in ceramic coatings by application of the Stoney formula (ISO 19674:2017); German and English version prEN ISO 19674:2
DIN EN ISO 22459:2024-04 Fine ceramics (advanced ceramics, advanced technical ceramics) - Reinforcement of ceramic composites - Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature
DIN EN ISO 22459:2022-07 Fine ceramics (advanced ceramics, advanced technical ceramics) - Reinforcement of ceramic composites - Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature (ISO 2...
DIN CEN/TS 1071-11:2006 Advanced technical ceramics - Methods of test for ceramic coatings - Part 11: Determination of internal stress by the Stoney formula; German version CEN/TS 1071-11:2005

RU-GOST R

GOST R 54396-2011 Vitreous china ware. Specifications
GOST R ISO 6474-1-2014 Implants for surgery. Ceramic materials. Part 1. Ceramic materials based on high purity alumina
GOST 28529-1990 Ceramic tiles kiln, used for floors and facing. Power consuming indices
GOST 13873-1981 Ceramic insulators. Requirements for surface quality
GOST 21125-1975 Insert from sintered hard metalls for plain plug-gauges. Formes and dimensions

SG-SPRING SG

SS 42-1971 SPECIFICATION FOR QUALITY OF VITREOUS CHINA SANITARY APPLIANCES

International Organization for Standardization (ISO)

ISO 19674:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of test for ceramic coatings — Determination of internal stress in ceramic coatings by application of the Stoney formula
ISO 21822:2019 Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement of iso-electric point of ceramic powder
ISO 19613:2018 Fine ceramics (advanced ceramics, advanced technical ceramics) - Measurement of viscosity of ceramic slurry by use of a rotational viscometer
ISO 20351:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) — Absolute measurement of internal quantum efficiency of phosphors for white light emitting diodes using an integrating sphere
ISO 10677:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) - Ultraviolet light source for testing semiconducting photocatalytic materials
ISO 24369:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of content of coarse particles in ceramic powders by wet sieving method
ISO 21713:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of elastic modulus of ceramics at high temperature by thin wall C-ring method
ISO 11894-1:2013 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for conductivity measurement of ion-conductive fine ceramics - Part 1: Oxide-ion-conducting solid electrolytes
ISO 20379:2018 Fine ceramics (advanced ceramics, advanced technical ceramics) - Measurement of thixotropic behaviour of ceramic slurry by use of a rotational viscometer
ISO 18550:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Testing method for macro-heterogeneity in microstructure
ISO 14605:2013 Fine ceramics (advanced ceramics, advanced technical ceramics).Light source for testing semiconducting photocatalytic materials used under indoor lighting environment
ISO 20343:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining elastic modulus of thick ceramic coatings at elevated temperature
ISO 19587:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at elevated temperature in air atmospheric pressure - Determination of in-plane shear strength
ISO 17561:2002 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance
ISO 6474-1:2010 Implants for surgery - Ceramic materials - Part 1: Ceramic materials based on high purity alumina
ISO 19603:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining elastic modulus and bending strength of thick ceramic coatings
ISO 23738:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Measurement method of spectral reflectance of fine ceramic thin films under humid conditions
ISO 19810:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for self-cleaning performance of semiconducting photocatalytic materials under indoor lighting environment - Measurement of water contact angle
ISO 17861:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) - Measurement method of spectral transmittance of fine ceramics thin films under humid condition
ISO 18558:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining elastic modulus and bending strength of ceramic tube and rings
ISO 17859:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) - Measurement method of piezoelectric strain at high electric field
ISO 19810:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for self-cleaning performance of semiconducting photocatalytic materials under indoor lighting environment — Measurement of water contact angle
ISO 17561:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance
ISO 10545-2:2018 Ceramic tiles - Part 2: Determination of dimensions and surface quality
ISO 10545-2:1995 Ceramic tiles - Part 2: Determination of dimensions and surface quality
ISO 22278:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for crystalline quality of single-crystal thin film (wafer) using XRD method with parallel X-ray beam
ISO 6474:1981 Implants for surgery — Ceramic materials based on alumina
ISO 4282:1992 Acid-grade and ceramic-grade fluorspar; determination of loss in mass at 105 °C
ISO 17561:2002/Cor 1:2007 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance; Technical Corrigendum 1
ISO/PAS 24565:2022 Petroleum and natural gas industries — Ceramic lined tubing
ISO 17094:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for antibacterial activity of semiconducting photocatalytic materials under indoor lighting environment
ISO 24448:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — LED light source for testing semiconducting photocatalytic materials used under indoor lighting environment
ISO 20506:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of the in-plane shear strength of continuous-fibre-reinforced composites at ambient temperature by the Iosipescu test
ISO/CD 10678:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue
ISO 6474:1994 Implants for surgery; ceramic materials based on high purity alumina
ISO 21820:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Ultraviolet photoluminescence image test method for analysing polytypes of boron- and nitrogen-doped SiC crystals
ISO 4825-1:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) --Test method for thermal property measurements of metalized ceramic substrates — Part 1: Evaluation of thermal resistance for use in power modules
ISO 11177:2016 Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing
ISO 10678:2010 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue

GSO

OS GSO ISO 17860:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) -- Determination of drying loss of ceramic granules
BH GSO ISO 19674:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of test for ceramic coatings — Determination of internal stress in ceramic coatings by application of the Stoney formula
GSO ISO 19674:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of test for ceramic coatings — Determination of internal stress in ceramic coatings by application of the Stoney formula
GSO ISO 17860:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) -- Determination of drying loss of ceramic granules
OS GSO ISO 10677:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) -- Ultraviolet light source for testing semiconducting photocatalytic materials
GSO ISO 10677:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) -- Ultraviolet light source for testing semiconducting photocatalytic materials
BH GSO ISO 11894-1:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for conductivity measurement of ion-conductive fine ceramics -- Part 1: Oxide-ion-conducting solid electrolytes
GSO ISO 20343:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining elastic modulus of thick ceramic coatings at elevated temperature
BH GSO ISO 20343:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining elastic modulus of thick ceramic coatings at elevated temperature
GSO ISO 11894-1:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for conductivity measurement of ion-conductive fine ceramics -- Part 1: Oxide-ion-conducting solid electrolytes
OS GSO ISO 17861:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) -- Measurement method of spectral transmittance of fine ceramics thin films under humid condition
BH GSO ISO 17861:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) -- Measurement method of spectral transmittance of fine ceramics thin films under humid condition
GSO ISO 17861:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) -- Measurement method of spectral transmittance of fine ceramics thin films under humid condition
GSO ISO 17859:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement method of piezoelectric strain at high electric field
GSO ISO 19603:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining elastic modulus and bending strength of thick ceramic coatings
BH GSO ISO 17859:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement method of piezoelectric strain at high electric field
GSO ISO 24369:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) -- Determination of content of coarse particles in ceramic powders by wet sieving method
BH GSO ISO 14605:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) -- Light source for testing semiconducting photocatalytic materials used under indoor lighting environment
GSO ISO 11177:2017 Vitreous and porcelain enamels -- Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply -- Quality requirements and testing
OS GSO ISO 14605:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) -- Light source for testing semiconducting photocatalytic materials used under indoor lighting environment
OS GSO ISO 11177:2017 Vitreous and porcelain enamels -- Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply -- Quality requirements and testing
GSO ISO 6474-1:2016 Implants for surgery -- Ceramic materials -- Part 1: Ceramic materials based on high purity alumina
OS GSO ISO 6474-1:2016 Implants for surgery -- Ceramic materials -- Part 1: Ceramic materials based on high purity alumina
GSO ISO 6474-1:2024 Implants for surgery — Ceramic materials — Part 1: Ceramic materials based on high purity alumina
GSO ISO 14720-1:2016 Testing of ceramic raw and basic materials -- Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials -- Part 1: Infrared measurement methods
OS GSO ISO 14720-1:2016 Testing of ceramic raw and basic materials -- Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials -- Part 1: Infrared measurement methods
GSO ISO/PAS 24565:2024 Petroleum and natural gas industries — Ceramic lined tubing
GSO ISO 10678:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) -- Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue
OS GSO ISO 10678:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) -- Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue

YU-JUS

JUS B.D1.300-1983 Ceramic tiles. Pressed ti les for internat covering. Technical requirements
JUS B.D1.301-1983 Ceramic tiles. Pressed ti les for interna! covering. Shape, dimensions and classification
JUS B.D8.098/1-1997 Ceramic tiles - Testing of quality - Amendment
JUS B.D1.210-1988 Ceramic sewer pipes, branches, connections and plates. Quality requirements
JUS U.N5.123-1989 Vitreous shina sanitary ware. Ship's watercloset bowls. Shape and dimensions
JUS B.D8.097-1998 Ceramic sewer pipes, branches, connections andplates - Freauencv of aualitv control

Society of Automotive Engineers (SAE)

SAE AMS2431/7-1988 Peening Media, Ceramic Shot
SAE AMS2431/7B-2013 Peening Media, Ceramic Shot
SAE AMS2431/9-2020 Peening Media Ceramic Shot, High Density

Danish Standards Foundation

DS/ENV 725-2:1994 Advanced technical ceramics. Methods of test for ceramic powders. Part 2: Determination of impurities in barium titanate
DS/EN ISO 14720-1:2013 Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 1: Infrared measurement methods
DS/ENV 821-3:1993 Advanced technical ceramics. Monolithic ceramics. Thermo-physical properties. Part 3: Determination of specific heat capacity

Korean Agency for Technology and Standards (KATS)

KS L 8551-2007(2022) Lightweight swelled ceramic block
KS L 1617-2017 Fine ceramics(advanced ceramics, advanced technical ceramics)－Determination of content of coarse particles in ceramic powders by wet sieving method
KS L 8551-2022 Lightweight swelled ceramic block
KS L 8551-2007(2017) Lightweight swelled ceramic block
KS L 8551-1994 Lightweight swelled ceramic block
KS L 1617-2022 Fine ceramics(advanced ceramics, advanced technical ceramics)－Determination of content of coarse particles in ceramic powders by wet sieving method
KS L 1617-2017(2022) Fine ceramics(advanced ceramics, advanced technical ceramics)－Determination of content of coarse particles in ceramic powders by wet sieving method
KS L ISO 17561-2023 Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance
KS C 3802-1985 Permissible limits of visual defects for insulating porcelains
KS L ISO 17561:2003 Fine ceramics(advanced ceramics, advanced technical ceramics)－Test method for elastic moduli of monolithic ceramics at roomtemperature by sonic resonance
KS C 3802-1977 Permissible limits of visual defects for insulating porcelains
KS E ISO 4282-2004(2009) Acid-grade and ceramic-grade fluorspar－Determination of loss in mass at 105℃
KS L ISO 17561:2018 Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance
KS E ISO 4282:2013 Acid-grade and ceramic-grade fluorspar－Determination of loss in mass at 105℃
KS L ISO 10678-2022 Fine ceramics(advanced ceramics, advanced technical ceramics)－Determination of photocatalytic activity of surface in an aqueous medium by degradation of methylene blue
KS L 9014-1996 Inorganic aggregates for use in gypsum plaster
KS E ISO 4282:2004 Acid-grade and ceramic-grade fluorspar-Determination of loss in mass at 105℃
KS L ISO 10678-2012(2017) Fine ceramics(advanced ceramics, advanced technical ceramics)－Determination of photocatalytic activity of surface in an aqueous medium by degradation of methylene blue
KS L 8551-2007 Lightweight swelled ceramic block
KS P ISO 6474-1:2021 Implants for surgery — Ceramic materials —Part 1: Ceramic materials based on high purity alumina
KS L ISO 10678-2012(2022) Fine ceramics(advanced ceramics, advanced technical ceramics)－Determination of photocatalytic activity of surface in an aqueous medium by degradation of methylene blue

HU-MSZT

MNOSZ 321-1956 The similarities between domestic and foreign steel quality. Alphabetical index
MSZ 111-1957 Mechanical non-alloy steel, hot rolled. Comparison of steel quality at home and abroad

BR-ABNT

ABNT MB-13-1979 Ceramic tube waterproofness and internal pressure
ABNT MB-13-1940 Varnish ceramic tube sealing and internal pressure testing

CU-NC

NC 66-31-1986 Electronics. Ceramic Variable Capacitors. Quality Specifications
NC 54-200-1984 Construction Materials and Products Red Ceramic Facing Brick. Quality Specifications
NC 54-202-1986 Construction Materials and Products. Sanitary Ceramic Pipes and Connections. Quality Specifications

CN-STDBOOK

图书 3-9920 Quality Assurance and Standardization of Distance Education Services at Home and Abroad

KR-KS

KS L ISO 10677-2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Ultraviolet light source for testing semiconducting photocatalytic materials
KS L ISO 17561-2018(2023) Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance
KS L ISO 14605-2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Light source for testing semiconducting photocatalytic materials used under indoor lighting environment
KS L ISO 17561-2018 Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance
KS P ISO 6474-1-2021 Implants for surgery — Ceramic materials —Part 1: Ceramic materials based on high purity alumina

American National Standards Institute （ANSI)

ANSI A118.6-2010 American National Standard Specifications for Standard Cement Grouts for Tile Installation

AT-ON

ONORM B 8240-2001 Chimneys - Ceramic inner liner - Marking of conformity
ONORM ENV 725-2-1994 Advanced technical ceramics. Methods of test for ceramic powders. Part 2: Determination of impurities in barium titanate

Association Francaise de Normalisation

NF EN 1007-2:2002 Advanced technical ceramics - Composite ceramics - Test methods for reinforcements - Part 2: determination of linear mass
NF EN ISO 18757:2006 Technical ceramics - Determination of the specific surface area (mass area) of ceramic powders by gas adsorption using the BET method
NF S94-064-1:2010 Implants for surgery - Ceramic materials - Part 1 : ceramic materials based on high purity alumina.
NF B44-105*NF ISO 14605:2013 Fine Ceramics (advanced ceramics, advanced technical ceramics) - Light source for testing semiconducting photocatalytic materials used under indoor lighting environment
NF B44-103*NF ISO 10677:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) - Ultraviolet light source for testing semiconducting photocatalytic materials
NF ISO 6474-1:2019 Surgical implants - Ceramic materials - Part 1: high-purity alumina-based ceramic materials
NF ISO 17721-1:2021 Quantitative determination of antibacterial activity of ceramic tile surfaces - Test methods - Part 1: ceramic tiles incorporating surface antibacterial agents
NF EN 13069:2005 Flues - Terracotta/ceramic outer casings for flue systems - Requirements and test methods
NF B43-306*NF EN 12289:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at ambiant temperature - Determination of in-plane shear properties

Japanese Industrial Standards Committee (JISC)

JIS R 1709:2014 Fine ceramics (advanced ceramics, advanced technical ceramics) -- Light source for test of photocatalytic materials used under ultraviolet
JIS A 5548:2015 Interior organic adhesives for ceramic tiles
JIS R 1753:2013 Fine ceramics (advanced ceramics, advanced technical ceramics).Test method for self-cleaning performance of photocatalytic materials under indoor lighting environment -- Measurement of water contact angle
JIS R 1752:2013 Fine ceramics (advanced ceramics, advanced technical ceramics).Test method for antibacterial activity of photocatalytic products and efficacy under indoor lighting environment
JIS R 1757:2013 Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method of complete decomposition by photocatalytic materials under indoor lighting environment -- Decomposition of acetaldehyde

IN-BIS

IS 2836-1974 Inspection methods and quality requirements for ceramic laboratory equipment
IS 7775-1975 Specification for Ceramic Grinding Media and Liners

ES-UNE

UNE-EN ISO 11177:2019 Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing (ISO 11177:2019) (Endorsed by Asociación Española de Normalización in June of 2...

GB-REG

REG 46 CFR PART 42-2011 DOMESTIC AND FOREIGN VOYAGES BY SEA
REG 46 CFR PT 42-2008 DOMESTIC AND FOREIGN VOYAGES BY SEA
REG 46 CFR PART 42-2010 DOMESTIC AND FOREIGN VOYAGES BY SEA

US-DOT

DOT 46 CFR PT 42-2010 DOMESTIC AND FOREIGN VOYAGES BY SEA
DOT 46 CFR PT 42-2009 DOMESTIC AND FOREIGN VOYAGES BY SEA

CEN - European Committee for Standardization

EN ISO 11177:2019 Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing

(U.S.) Ford Automotive Standards

FORD FLTM BO 109-01-2010 VISUAL APPEARANCE EVALUATION OF INTERIORS

European Committee for Standardization (CEN)

prEN ISO 22459 Fine ceramics (advanced ceramics, advanced technical ceramics) - Reinforcement of ceramic composites - Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature (ISO/FDIS
EN ISO 11177:2016 Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing
PD CEN/TS 1071-11:2005 Advanced technical ceramics - Methods of test for ceramic coatings - Part 11: Determination of internal stress by the Stoney formula
DD ENV 821-3-1993 Advanced Technical Ceramics - Monolithic Ceramics - Thermo- Physical Properties - Part 3: Determination of Specific Heat Capacity
CEN/TS 1071-11:2005 Advanced technical ceramics - Methods of test for ceramic coatings - Part 11: Determination of internal stress by the Stoney formula

Lithuanian Standards Office

LST EN 821-3-2005 Advanced technical ceramics - Monolithic ceramics. Thermo-physical properties - Part 3: Determination of specific heat capacity

BELST

STB 1354-2002 Ceramic glazed tiles for interior wall facing. Specifications

Defense Logistics Agency

DLA MIL-C-11015 E-2001 CAPACITORS, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE),
DLA MIL-C-11015 E SUPP 1-2001 CAPACITORS, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE),
DLA MIL-PRF-81/1 D-2005 CAPACITORS, VARIABLE, CERAMIC DIELECTRIC, STYLE CV11

Others: Quality analyzer at home and abroad,Ceramic quality at home and abroad,Air quality at home and abroad,Air quality instruments at home and abroad