three-point bending mode

three-point bending mode, Total:70 items.

The international standard classification for "three-point bending mode" includes: Raw materials and raw glass , Other rubber and plastics products , Refractories , Advanced ceramics , Moulding equipment , Plastics in general , Paper and board .

The Chinese standard classification for "three-point bending mode" includes: Ceramic and glass in general , Other rubber products , Combination grippers , Fireproof material in general , Special ceramics , Moulds , Papermaking in general .

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass--Three-point bending method
GB/T 33099-2016 Test methods of stiff’ness for dipped reinforcing material一Three-point bending

未注明发布机构

ANSI/ASAE S459-1992(2017) Shear and Three-Point Bending Test ofAnimal Bone
ASTM RR-E37-1032 2003 E2092-Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis

Professional Standard - Aviation

HB 4343-1989 Curved Female Frame
HB 4369-1989 Curved Die Block

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39826-2021 Fine ceramics—Determining flexural bond strength—Four-point bending method
GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）

Professional Standard - Aerospace

QJ 773.30-1983 Small-sized Combination Die � Bent-shaped Bent Male Die
QJ 2533.4-1993 Small Combination Bending Die Components Bending Die

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 23144-2023 Paper and board—Determination of bending stiffness—General principles for two-point|| three-point and four-point methods
GB/T 22906.6-2008 Testing of cores—Part 6:Determination of bending strength by three-point method
GB/T 11546.2-2022 Plastics—Determination of creep behaviour—Part 2:Flexural creep by three-point loading

British Standards Institution (BSI)

BS ISO 11093-7:2011 Paper and board. Testing of cores. Determination of flexural modulus by the three-point method
BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS ISO 5628:2012 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
BS EN ISO 899-2:2003+A1:2015 Plastics. Determination of creep behaviour. Flexural creep by three-point loading
BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
BS ISO 5628:2019 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods

FI-SFS

SFS-ISO 6602 E:1986 This standard is approved in English

SCC

BS ISO 11093-7:1997 Paper and board. Testing of cores-Determination of flexural modulus by the three-point method
NS-EN 2746:1998 Aerospace series — Glass fibre reinforced plastics — Flexural test — Three point bend method
DANSK DS/EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
BS ISO 11093-6:1996 Paper and board. Testing of cores-Determination of bending strength by the three-point method
BS EN ISO 899-2:1997 Plastics. Determination of creep behaviour-Flexural creep by three-point loading

German Institute for Standardization

DIN EN 2746:1998-10 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN ISO 11093-7:2012-10 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method (ISO 11093-7:2011)
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters

American Society for Testing and Materials (ASTM)

ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test

AENOR

UNE-EN 2746:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. FLEXURAL TEST. THREE POINT BEND METHOD.

American National Standards Institute （ANSI)

ANSI/ASAE S459-1993 Shear and Three-Point Bending Test of Animal Bones
ANSI/TAPPI T836 om-2013 Bending stiffness, four point method
ANSI/ASTM D5023:2001 Test Method for Measuring the Dynamic Mechanical Properties of Plastics Using Three Point Bending (08.03)

RU-GOST R

GOST 34368.2-2017 Plastics. Method of determination of flexural creep by three-point loading

GSO

OS GSO ISO 11093-7:2014 Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method
BH GSO ISO 11093-7:2015 Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method
BH GSO ISO 14679:2016 Adhesives -- Measurement of adhesion characteristics by a three-point bending method
GSO ISO 14679:2015 Adhesives -- Measurement of adhesion characteristics by a three-point bending method
GSO ISO 11093-7:2014 Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method
GSO ISO 16978:2009 Wood-based panels- Determination of modulus of elasticity in bending and of bending strength

Association Francaise de Normalisation

NF T51-120-3:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 3 : essai en flexion trois points sur éprouvettes non encastrées.
NF Q03-127:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods.

Lithuanian Standards Office

LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method

European Committee for Standardization (CEN)

EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
EN 63:1977 Glass Reinforced Plastics: Determination of Flexural Properties; Three Point Method

Danish Standards Foundation

DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method

Korean Agency for Technology and Standards (KATS)

KS M ISO 14679-2022 Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 11093-7:2014 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-7:2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 14679-2007(2022) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679-2007(2017) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679:2007 Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 11093-7:2008 Paper and board-Testing of cores-Part 7:Determination of flexural modulus by the three-point method
KS M ISO 5628-2023 Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods

International Organization for Standardization (ISO)

ISO 6602:1985 Plastics; Determination of flexural creep by three-point loading
ISO 11093-7:1997 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method
ISO 14679:1997 Adhesives - Measurement of adhesion characteristics by a three-point bending method
ISO 5628:2019 Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
ISO 5628:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods

KR-KS

KS M ISO 11093-7-2020 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method

AT-ON

ONORM EN 63-1979 Glass reinforced plastics. Determination of flexural properties. Three point method.

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method (Issue P 1)

DIN

DIN ISO 11093-7:1998 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method (ISO 11093-7:1997)

RO-ASRO

STAS SR EN 310-1996 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength

WRC - Welding Research Council

BULLETIN 180-1973 ELASTIC-PLASTIC BENDING OF A CONSTRAINED CIRCULAR PERFORATED PLATE UNDER UNIFORM PRESSURE (TRIANGULAR PENETRATION PATTERN)

American Welding Society (AWS)

WRC 180:1973 Elastic-Plastic Bending of a Constrained Circular Perforated Plate Under Uniform Pressure (Triangular Penetration Pattern)