curve material

curve material, Total:93 items.

The international standard classification for "curve material" includes: Testing of metals , Electric tools , Mechanical testing of metals , Saws .

The Chinese standard classification for "curve material" includes: Metal mechanical property test method , Electric tool , Metal processing property test method , Cutting tools .

Military Standard of the People's Republic of China-General Armament Department

GJB 5309.24-2004 Test methods for pyrotechnics Part 24: Determination of ignition pressure-time curve
GJB 736.16-1994 Pyrotechnics Test Method Ignition Pressure-Time Curve Determination
GJB 736.16A-2019 Test methods for pyrotechnics Part 16: Determination of ignition pressure-time curve

Jilin Provincial Standard of the People's Republic of China

DB22/T 2053-2014 A real-time fluorescent PCR method for the determination of Aspergillus nidulans in feed

Professional Standard - Aviation

HB 5261-2023 Standard test method for K-R curve determination of metallic materials
HB 5488-1991 Metal Material Stress - Determination Method for Strain Curve

Group Standards of the People's Republic of China

T/SDAQI 044-2021 Detection of aflatoxigenic strains of Aspergillus in animal feed by Real-time PCR
T/ZZB 0496-2018 Jig saws
T/ZZB 2043-2021 Jigsaw blades

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 238-2013 Metallic materials—Wire—Reverse bend test
GB/T 22680-2008 Jig saws
GB/T 238-2002 Metallic materials - Wire - Reverse bend test

Professional Standard - Light Industry

QB/T 4267-2011 Curve saw blade

British Standards Institution (BSI)

BS ISO 22183:2023 Plastics. Validation of force-time curves obtained from high-speed tensile tests
22/30427884 DC BS ISO 22183. Plastics. Validation of force-time curve of tensile testing at high speed
PD ISO/TS 28660:2022 Plastics. Determination of J-R curves. Fracture toughness
BS ISO 11357-5:2001 Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
BS ISO 11357-5:1999 Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
BS EN ISO 6721-3:2021 Plastics. Determination of dynamic mechanical properties. Flexural vibration. Resonance-curve method
BS EN ISO 11357-5:2014 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
BS ISO 11357-5:2013 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion

International Organization for Standardization (ISO)

ISO 22183:2023 Plastics — Validation of force-time curves obtained from high-speed tensile tests
ISO 6133:1981 Rubber and plastics; Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
ISO/DIS 7801:2023 Metallic materials — Wire — Reverse bend test
ISO 7801:1984 Metallic materials; Wire; Reverse bend test
ISO/CD 7801 Metallic materials — Wire — Reverse bend test
ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
ISO/TS 28660:2022 Plastics — Determination of J-R curves — Fracture toughness

CH-SNV

VSM 14331-1949 When the drop of the inclined line is large, the longitudinal drop decreases curve
VSM 16109-1970 Paint and dye industry. Paint testing. Curve

ESDU - Engineering Sciences Data Unit

ESDU 89008 C-1990 Normal-force-curve and pitching-moment-curve slopes of forebody-cylinder combinations at zero angle of attack for Mach numbers up to 5.
STRUCT 02.01.09 B-1976 Inter-rivet buckling curves for specific materials.

American National Standards Institute （ANSI)

ANSI/IEEE C37.112:1996 Standard Inverse-Time Characteristic for Overcurrent Relays

American Welding Society (AWS)

WRC 557:2016 Buckling and Post Buckling of Plate Girders in Bending

AASHTO - American Association of State Highway and Transportation Officials

DIVISION I 10.12-1996 Flexural Members (Interim 1999; Interim 2000;)
DIVISION I 13.6-1996 Bending Members (Interim 1998)
DIVISION I 8.17-1996 Reinforcement of Flexural Members (Interim 1997)

YU-JUS

JUS D.C8.108-1983 Testing ofparticle boards. Determination modu/us ofelasticity in bending
JUS G.S2.640-1991 Plastics and abonite.Determination of temperature of deflection under load
JUS U.C4.052-1990 Caaages of direction in the borizontal plane. Traosition curve. Horizontal cur~ es. Compound curves
JUS U.J1.070-1986 Fire protection. Standard time-temperature curve in fire resistance test furnaces for constructions

AREMA - American Railway Engineering and Maintenance-of-Way Association

CHAPTER 5/PART 3-1995 Curves (Current from August 1@ 1997 to July 31@ 1998; Volume 1/Track)
CHAPTER 5/PART 3-2001 Curves (Volume 1/Track)
CHAPTER 5/PART 3-2000 Curves (Volume 1/Track)

RU-GOST R

GOST R 52740-2007 Paint materials. Method for determination of film strength while bending around cylindrical mandrel
GOST 300-1969 Curvemeters
GOST 33359-2015 Residual fuel oils. Test for straight-run. Determination of distillation curve at pressure of 0,133 kPa (1 mm Hg)
GOST 16483.4-1973 Wood. Methods for determination of impact bending strength

Association Francaise de Normalisation

NF T51-120-6:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 6 : essai de flexion par flambement.
NF T30-302:1969 Paints. Determination of the evaporation curve of a solvent.
NF B51-124*NF EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength.

SCC

AENOR UNE-EN ISO 6721-3:1996 Plastics. Determination of mechano-dynamic properties. Part 3: Vibration in flexion. Resonance curve method. (ISO 6721-3:1994 + Technical Corrigendum 1:1995).
BS PD ISO/TS 28660:2022 Plastics. Determination of J-R curves. Fracture toughness

Danish Standards Foundation

DS/ISO 6133:1981 Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

Japanese Industrial Standards Committee (JISC)

JIS K 6274:2006 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
JIS K 6274:2018 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

RO-ASRO

STAS SR ISO 7801:1993 Metallic materials. Wire. Reverse bend test

American Railway Engineering and Maintenance-of-Way Association (AREMA)

AREMA CH 5-3-1995 Curves

CZ-CSN

CSN 34 6318-1987 Testing of ceramic elektrotechnic materials.Test of long time loading in the flexure
CSN ISO 7801:1994 Metallic materials. Wire. Reverse bend test
CSN 02 2928-1967 Lock wire rings curved

Korean Agency for Technology and Standards (KATS)

KS B ISO 7801-2015 Metallic materials－Wire－Reverse bend test
KS B ISO 7801:2002 Metallic materials-Wire-Reverse bend test
KS B ISO 7801:2015 Metallic materials－Wire－Reverse bend test
KS B ISO 7801-2002(2012) Metallic materials－Wire－Reverse bend test

VN-TCVN

TCVN 1826-2006 Metallic materials.Wire.Reverse bend test

GSO

GSO ISO 7801:2015 Metallic materials -- Wire -- Reverse bend test
OS GSO ISO 7801:2015 Metallic materials -- Wire -- Reverse bend test
GSO ISO 21914:2022 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
BH GSO ISO 21914:2023 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test

GM North America

GM 9986115-2003 Oil - Axle Lubricant, Fuel-Efficient Hypoid Revision A
GM GM4380P-1988 Viscosity of Crankcase Oil at-17.8 C

ZA-SANS

SANS 7801:2003 Metallic materials - Wire - Reverse bend test

IPC - Association Connecting Electronics Industries

IPC TM-650 2.4.3D-1998 Flexural Endurance@ Flexible Printed Wiring Materials
IPC TM-650 2.4.3C-1988 Flexural Endurance@ Flexible Printed Wiring Materials

TH-TISI

TIS 2175-2004 Reverse bend test for metallic wire [iso title: metallic materials.wire.reverse bend test]

Indonesia Standards

SNI 07-4611-1998 Reverse bend test for metallic material wires

HU-MSZT

MSZ 1541-1963 hand curve

SE-SIS

SIS SS 11 26 22-1983 Metallic materials - Wire - Reverse bend test

VDI - Verein Deutscher Ingenieure

VDI 2900-1985 Time estimate on short notice for punching and bending tools

American Society for Testing and Materials (ASTM)

ASTM D6068-96(2002)e1 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D6068-10 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D3813/D3813M-98(2003) Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes
ASTM D3813/D3813M-98 Standard Test Method for Curling and Twisting on Unwinding of Pressure-Sensitive Tapes

European Committee for Standardization (CEN)

prEN 310-1992 Wood-based panels; determination of modulus elasticity, in bending and bending strength

ES-AENOR

UNE 7-468-1988 metallic material. metal wire. single twist test
UNE 7-468 ERRATUM-1988 metallic material. metal wire. single twist test

IT-UNI

UNI S 195-1943 Insulation material standards. Numerical charts and graphs

Association of German Mechanical Engineers

DVS 2205-1 Beiblatt 23-2006 Calculation of creep modulus curves for containers and equipment made of thermoplastic PE 80 at different operating times
DVS 2205-1 Beiblatt 24-2007 Calculation of creep modulus curves for containers and equipment made of thermoplastic PE 100 at different operating times
DVS 2205-1 Beiblatt 23-2007 Calculation of creep modulus curves for containers and equipment made of thermoplastic PE 80 at different operating times
DVS 2205-1 Beiblatt 24-2006 Calculation of creep modulus curves for containers and equipment made of thermoplastic PE 100 at different operating times

Society of Automotive Engineers (SAE)

SAE AS84D-2014 Splines, Involute (Full Fillet)