Liquid Flow Meter Installation

Liquid Flow Meter Installation, Total:235 items.

The international standard classification for "Liquid Flow Meter Installation" includes: Flow in closed conduits , Volumetric equipment and measurements , Natural gas , Measurement of fluid flow .

The Chinese standard classification for "Liquid Flow Meter Installation" includes: Flow capacity and material level instrument , Oil and gas gathering and transportation equipment , Natural gas , Marking, packaging, transport and storage , Mechanics Measurement .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 44398-2024 Refrigerated hydrocarbon fluids—Dynamic measurement—Requirements and guidelines for the calibration and installation of flowmeters used for liquefied natural gas (LNG) and other refrigerated hydrocarbon fluids
GB/T 18660-2002 Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters
GB/T 35138-2017 Measurement of fluid flow in closed conduits-Ultrasonic transit-time meters for liquid
GB/T 25922-2023 Measurement of fluid flow in closed conduits—Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
GB/T 25922-2010 Measurement of fluid flow in closed conduits—Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
GB/T 9109.2-1988 Dynamic measurement of crude oil--The technical requirement of displacement meter installation
GB/T 9109.2-2014 Dynamic Measurement of Petroleum and Liquid Petroleum Products - Part 2: Technical Requirements of Meter Installation
GB/T 17288-1998 Liquid hydrocarbons--Volumetric measurement by displacement meter systems other than dispensing pumps
GB/T 20728-2006 Measurement of fluid flow in closed conduits - Guidance to the selection installation and use of Coriolis meters
GB/T 17288-2009 Liquid hydrocarbons - Volumetric measurement by displacement meter systems
GB/T 20729-2006 Measurement of conductive liquid flow in closed conduits - Flanged electromagnetic flowmeters - Overall length
GB/T 20728-2021 Measurement of fluid flow in closed conduits—Guidance to the selection, installation and use of Coriolis flowmeters
GB/T 17289-1998 Liquid hydrocarbons --Volumetric measurement by turbine meter system
GB/T 17289-2009 Liquid hydrocarbons - Volumetric measurement by turbine meter systems

Professional Standard - Machinery

JB/T 12959-2016 Roots flowmeters for liquids
JB/T 11929-2014 Flow-metering Intermittent Liquid Adding System

Henan Provincial Standard of the People's Republic of China

DB4102/T 011-2020 Gas turbine flowmeter installation and construction requirements
DB4102/T 010-2020 Installation and construction requirements of gas Roots flowmeter
DB4102/T 009-2020 Gas ultrasonic flowmeter installation and construction requirements

未注明发布机构

Vortex Shedding Flowmeter for Measurement of Hydrocarbon Fluids 2007 Vortex Shedding Flowmeter for Measurement of Hydrocarbon Fluids
JIS B 7552:1982 Proving Methods for Liquid Flowmeters

National Metrological Verification Regulations of the People's Republic of China

JJG 2063-2007 Verification Scheme of Measuring Instruments for Liquid Flow
JJG 667-1997 Verification Regulation of Liquid Positive Displacement Flow Meter
JJG 164-2000 Verification Regulation of Standard Facilities for Liquid Flowrate
JJG 667-2010 Liquid Positive Displacement Flowmeter

Professional Standard - Petroleum

SY/T 5671-1993 Handover measurement rules for flow meters of petroleum and liquid petroleum products
SY/T 6890.1-2012 Operation and Maintenance Regulations for Flowmeter-Part 1: Liquid Positive Displacement Flowmeter
SY/T 5671-2018 Petroleum and liquid petroleum products. Procedures for custody transfer measurement by meter

Group Standards of the People's Republic of China

T/CSMT-YB010-2024 Liquid flow standard device measurement and control system

AT-ON

ONORM M 5922-1982 Heatmeters (meters for quantities of heat) for liquid carrier fluids; directives for dimensioning and installation
ONORM EN 29104-1993 Measurement of fluid flow in closed conduits - Methods of evaluating the Performance of electromagnetic flow-meters forliquids (ISO 9104:1991)
ONORM M 5921-1988 Heatmeters (meters for quantities of heat) for liquid heat carrier fluids; requirements for measurement
ONORM B 2403-1998 Liquid flow measurement in using propeller-type current meters
ONORM M 5920-1988 Heatmeters (meters for quantities of heat) for liquid heat carrier fluids; general basic Information

International Organization for Standardization (ISO)

ISO 13359:1998 Measurement of conductive liquid flow in closed conduits - Flanged electromagnetic flowmeters - Overall length
ISO 10790:2015 Measurement of fluid flow in closed conduits - Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)
ISO 21903:2020 Refrigerated hydrocarbon fluids — Dynamic measurement — Requirements and guidelines for the calibration and installation of flowmeters used for liquefied natural gas (LNG) and other refrigerated hydro
ISO 10574:1993 Refrigerated light-hydrocarbon fluids; mesaurement of liquid levels in tanks containing liquefied gases; float-type level gauges
ISO 748:2007 Hydrometry - Measurement of liquid flow in open channels using current-meters or floats
ISO 20456:2017 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids
ISO 10790:1999/Amd 1:2003 Measurement of fluid flow in closed conduits - Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements); Amendment 1: Guidance for gas measurement
ISO 9104:1991 Measurement of fluid flow on closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids
ISO 12242:2012 Measurement of fluid flow in closed conduits - Ultrasonic transit-time meters for liquid
ISO 2715:2017 Liquid hydrocarbons. Volumetric measurement by turbine flowmeter. Volumetric measurement by turbine meter systems
ISO 6418:1985 Liquid flow measurement in open channels — Ultrasonic (acoustic) velocity meters
ISO 2715:1981 Liquid hydrocarbons; Volumetric measurement by turbine meter systems
ISO 748:2021 Hydrometry — Measurement of liquid flow in open channels — Velocity area methods using point velocity measurements
ISO 4375:1979 Measurement of liquid flow in open channels; Cableway system for stream gauging
ISO/DIS 24062 Measurement of fluid flow in closed conduits — Clamp-on ultrasonic transit-time meters for liquids and gases
ISO/FDIS 24062:2023 Measurement of fluid flow in closed conduits — Clamp-on ultrasonic transit-time meters for liquids and gases
ISO 10790:1999 Measurement of fluid flow in closed conduits - Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
ISO 8316:1987 Measurement of liquid flow in closed conduits; Method by collection of the liquid in a volumetric tank

RO-ASRO

STAS R 12091-1982 MEASUREMENT OF FLUID FLOW Estimation of uncertainty af a flow-rate measurement
STAS 12440/5-1986 Hydraulic fluid power MOUNTING SURFACES FOR COM- PENSATED FLOW CONTROL VALVES Dimensions

CN-STDBOOK

图书 a-4420 liquid flow meter

Korean Agency for Technology and Standards (KATS)

KS B ISO 748:2021 Hydrometry — Measurement of liquid flow in open channels using current-meters or floats
KS B ISO 748-2021 Hydrometry — Measurement of liquid flow in open channels using current-meters or floats
KS B ISO 18320:2022 Hydrometry — Measurement of liquid flow in open channels — Determination of the stage–discharge relationship
KS B ISO 18320-2022 Hydrometry — Measurement of liquid flow in open channels — Determination of the stage–discharge relationship
KS B ISO 6263-2004(2009) Hydraulic fluid power－Compensated flow－control valves－Mounting surfaces
KS B 5325-2024 Proving methods for liquid flowmeters
KS B ISO TR 11974-2005(2015) Measurement of liquid flow in open channels－Electromagnetic current meters
KS B ISO TR 11974-2023 Measurement of liquid flow in open channels－Electromagnetic current meters
KS B 5325-2019 Proving methods for liquid flowmeters
KS B 5325-2009(2024) Proving methods for liquid flowmeters
KS B 5325-1994 Proving methods for liquid flowmeters
KS B ISO 2537:2021 Hydrometry — Rotating-element current-meters
KS B ISO 2537-2021 Hydrometry — Rotating-element current-meters
KS B ISO 10790-2003(2023) Measurement of fluid flow in closed conduits－Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
KS B ISO 10790-2023 Measurement of fluid flow in closed conduits－Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
KS B ISO 10790-2003(2018) Measurement of fluid flow in closed conduits－Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
KS B 5325-2009(2019) Proving methods for liquid flowmeters
KS B ISO TR 11627-2014 Measurement of liquid flow in open channels — Computing stream flow using an unsteady flow model
KS M ISO 2715-2003(2008) Liquid hydrocarbons－Volumetric measurement by turbine meter systems
KS B ISO 13359:2004 Measurement of conductive liquid flow in closed conduits-Flanged electromagnetic flowmeters-Overall length
KS B ISO 13359:2014 Measurement of conductive liquid flow in closed conduits — Flanged electromagnetic flowmeters — Overall length
KS B ISO 10790:2003 Measurement of fluid flow in closed conduits－Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
KS M ISO 13689-2013 Refrigerated light hydrocarbon fluids－Measurement of liquid levelsin tanks containing liquefied gases－Microwave-type level gauge

Association Francaise de Normalisation

NF ISO 6263:2013 Hydraulic transmissions - Flow regulators - Installation plan
NF X10-301:2009 Hydrometry - Measurement of liquid flow in open channels using current-meters or floats.
NF X10-121:1993 Measurement of fluid flow in closed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids.
NF X10-121*NF EN ISO 20456:2019 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids
NF EN ISO 20456:2019 Mesurage du débit des fluides dans les conduites fermées - Lignes directrices pour l'utilisation des débitmètres électromagnétiques dans les liquides conducteurs
NF X10-120:1995 Measurement of conductive liquid flow in closed conduits. Method using electromagnetic flow meters.
NF X10-320:1989 Liquid flow measurement in open channels. Rotating element current-meters.
NF M08-038*NF ISO 2715:2020 Liquid hydrocarbons - Volumetric measurement by turbine flowmeter
NF C46-503*NF EN 60534-2-1:2011 Industrial-process control valves - Part 2-1 : flow capacity - Sizing equations for fluid flow under installed conditions.

American Society of Mechanical Engineers (ASME)

ASME MFC-6M-1987 Measurement of fluid flow in pipes using vortex flow meters
ASME MFC-22-2007(R2014) Measurement of Liquid by Turbine Flowmeters
ASME MFC-22-2007 Measurement of Liquid by Turbine Flowmeters
ASME MFC-11M-1989 Measurement of fluid flow by means of Coriolis mass flowmeters
ASME MFC-6M Errata-1987 Measurement of fluid flow in pipes using vortex flow meters; Errata
ASME MFC-11-2006 Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters
ASME MFC-11M-2003 Measurement of fluid flow by means of Coriolis mass flowmeters
ASME MFC-11M-2006 Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters
ASME MFC-16-2007 Measurement of Liquid Flow in Closed Conduits with Electromagnetic Flowmeters
ASME MFC-16-2014(R2019) Measurement of Liquid Flow in Closed Conduits with Electromagnetic Flowmeters
ASME MFC-16-2014 Measurement of Liquid Flow in Closed Conduits with Electromagnetic Flowmeters
ASME MFC-16M-1995 Measurement of fluid flow in closed conduits by means of electromagnetic flowmeters
ASME MFC-14M-1995 Measurement of fluid flow using small bore precision orifice meters
ASME MFC-14M-2003 Measurement of Fluid Flow Using Small Bore Precision Orifice Meters
ASME MFC-10M-2000(R2021) Method for Establishing Installation Effects on Flow Meters
ASME MFC-5.1-2011(R2024) Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters
ASME MFC-5.1-2011(R2018) Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters
ASME MFC-5M-1985(R2006) Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters
ASME MFC-5.1-2011 Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters
ASME MFC-5.3-2013(R2018) Measurement of Liquid Flow in Closed Conduits Using Doppler Ultrasonic Flowmeters
ASME MFC-10M-2000 Method for Establishing Installation Effects on Flowmeters

American National Standards Institute （ANSI)

ANSI/ASME MFC-6M-1998 Fluid Flow in Pipes Using Vortex Flow Meters, Measurement of
ANSI/ASME MFC-22-2007 Measurement of Liquid by Turbine Flowmeters
ANSI/ASME MFC-18M-2001 Measurement of Fluid Flow in Pipes Using Variable Area Meters
ANSI/ASME MFC-10M-2000 Method for Establishing Installation Effects on Flowmeters

British Standards Institution (BSI)

BS ISO 10790:2015 Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)
BS ISO/TR 11974:1997(1999) Measurement of liquid flow in open channels — Electromagnetic current meters
BS ISO 6263:1997 Hydraulic fluid power. Compensated flow-control valves. Mounting surfaces
BS ISO 10790:1999 Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
BS 6494-5:1989 Hydraulic fluid power valve mounting surfaces-Specification for compensated flow-control valves
BS EN ISO 8316:1988 Method of liquid flow in closed conduits - Method by collection of the liquid in a volumetric tank
BS EN 29104:1993 Measurement of fluid flow in closed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids
BS EN 29104:1991 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids
BS EN ISO 20456:2019 Measurement of fluid flow in closed conduits. Guidance for the use of electromagnetic flowmeters for conductive liquids
BS EN ISO 6817:1993 Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters
11/30215947 DC BS ISO 12242. Measurement of fluid flow in closed conduits. Ultrasonic meters for liquid
BS ISO/TS 15768:2000 Measurement of liquid velocity in open channels - Design, selection and use of electromagnetic current meters
BS EN ISO 748:2007 Hydrometry - Measurement of liquid flow in open channels using current-meters or floats
BS 3680-5:1992 Measurement of liquid flow in open channels - Slope area method of estimation
BS 8452:2010 Use of clamp-on (externally mounted) ultrasonic flow-metering techniques for fluid applications. Guide
BS EN 60534-2-1:2011 Industrial-process control valves. Flow capacity. Sizing equations for fluid flow under installed conditions
BS ISO 21903:2020 Refrigerated hydrocarbon fluids. Dynamic measurement. Requirements and guidelines for the calibration and installation of flowmeters used for liquefied natural gas (LNG) and other refrigerated hydrocarbon fluids
16/30323541 DC BS ISO 20456. Measurement of fluid flow in closed conduits. Guidance for the use of electromagnetic flowmeters for conductive liquids
12/30258979 DC BS ISO 10790. Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
BS ISO 6264:1998 Hydraulic fluid power - Pressure-relief valves - Mounting surfaces
BS 7117-2:1991 Metering pumps and dispensers to be installed at filling stations and used to dispense liquid fuel - Guide to installation
BS ISO 24062:2023 Measurement of fluid flow in closed conduits. Clamp-on ultrasonic transit-time meters for liquids and gases
BS ISO TS 15768:2000 Measurement of liquid velocity in open channels - Design , selection and use of electromagnetic current meters
BS ISO 13689:2001 Refrigerated light hydrocarbon fluids — Measurement of liquid levels in tanks containing liquefied gases — Microwave - type level gauge
BS EN ISO 6817:1997(1999) Measurement of conductive liquid flow in closed conduits — Method using electromagnetic flowmeters
BS EN ISO 6817:1997 Measurement of conductive liquid flow in closed conduits. Method using electromagnetic flowmeters
BS ISO 13359:1998 Measurement of conductive liquid flow in closed conduits - Flanged electromagnetic flowmeters - Overall length
18/30350536 DC BS ISO 21903. Refrigerated Hydrocarbon Fluids. Dynamic Measurement. Guidance for the calibration, installation and use of flow meters for LNG and other refrigerated hydrocarbon fluids
BS ISO 12242:2012 Measurement of fluid flow in closed conduits. Ultrasonic transit-time meters for liquid
10/30173459 DC BS 8452. Use of clamp-on (externally mounted) ultrasonic flow-metering techniques for fluid applications. Guide
BS ISO 16873:2002 Hydraulic fluid power. Pressure switches. Mounting surfaces
BS 3680-3Q:1993 Measurement of liquid flow in open channels. Stream flow measurement-Code of practice for safe practice in stream gauging

Japanese Industrial Standards Committee (JISC)

JIS B 8357:2022 Hydraulic fluid power -- Compensated flow-control valves -- Mounting surfaces
JIS B 7552:1993 Liquid flowmeters -- Proving methods
JIS B 8666:2001 Hydraulic fluid power -- Pressure-relief valves -- Mounting surfaces

United States Navy

NAVY MIL-F-24259 A-1987 FLUID FLOWMETER, VOLUME VELOCITY TYPE
NAVY MIL-F-24291 C NOTICE 1-1998 FLOWMETER, FLUID ELECTROMAGNETIC TYPE
NAVY MIL-F-24291 C-1990 FLOWMETER, FLUID ELECTROMAGNETIC TYPE
NAVY MIL-F-24701-1988 FLOWMETER, LIQUID, ULTRASONIC, NON-INTRUSIVE

Ente Nazionale Italiano di Unificazione

UNI ISO 6263:1992 Hydraulic fluid power. Compensated flow- control valves. Mounting surfaces.
UNI EN ISO 20456:2020 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids
UNI EN 29104:1994 Measurement of fluid flow in closed conduits. Method of evaluating the performance of electromagnetic flow- meters for liquids.
UNI EN ISO 748:2008 Hydrometry - Measurement of liquid flow in open channels using current-meters or floats
UNI EN 1359:2001 Gas meters - Diaphragm gas meters
UNI 8157:1984 Heat meters for heating plants based on thermal balance of heat conveying liquid.

GCC Standardization Organization

GSO ISO 6263:2015 Hydraulic fluid power -- Compensated flow-control valves -- Mounting surfaces
GSO ISO 21903:2024 Refrigerated hydrocarbon fluids — Dynamic measurement — Requirements and guidelines for the calibration and installation of flowmeters used for liquefied natural gas (LNG) and other refrigerated hydrocarbon fluids
GSO OIML D25:2012 Vortex meters used in measuring systems for fluids
GSO ISO 20456:2021 Measurement of fluid flow in closed conduits — Guidance for the use of electromagnetic flowmeters for conductive liquids
GSO ISO 10790:2016 Measurement of fluid flow in closed conduits -- Guidance to the selection, installation and use of Coriolis flow meters (mass flow, density and volume flow measurements)
GSO ISO 12242:2015 Measurement of fluid flow in closed conduits -- Ultrasonic transit-time meters for liquid
GSO ISO 6817:2008 Measurement of conductive liquid flow in closed conduits-Method using electromagnetic, flowmeters
GSO ISO 748:2008 Hydrometry — Measurement of liquid flow in open channels using current-meters or floats
GSO ISO 6264:2015 Hydraulic fluid power -- Pressure-relief valves -- Mounting surfaces

IN-BIS

IS 4477 Pt.1-1967 Methods for measuring fluid flow using Venturi flow meters Part Ⅰ Liquids

Bureau of Indian Standards

IS 4477-1-1967 Method of Measurement of Fluid Flow by Means of Venturi Meters - Part I : Liquids
IS 1192-2013 Hydrometry - Measurement of Liquid Flow in Open Channels Using Current-Meters or Floats
IS 16138-2013 Measurement of Liquid Velocity in Open Channels - Design, Selectio and Use of Electromagnetic Current Meters

German Institute for Standardization

DIN EN 29104:1993 Measurement of fluid flow in closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991); German version EN 29104:1993
DIN EN ISO 20456:2020-09 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017); German version EN ISO 20456:2019
DIN EN ISO 748:2008 Hydrometry - Measurement of liquid flow in open channels using current-meters or floats (ISO 748:2007); English version of DIN EN ISO 748:2008-02
DIN EN ISO 20456 E:2019-06 Measurement of Fluid Flow in Closed Pipes Guidelines for the Use of Conductive Liquid Electromagnetic Flowmeters (Draft)
DIN EN ISO 20456:2020 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)
DIN EN ISO 20456 E:2019 Draft Document - Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017); German and English version prEN ISO 20456:2019
DIN 24336:1980-06 Fluidpower; hydraulic cylinder 100 bar, mounting dimensions
DIN 24336:1980 Fluidpower; hydraulic cylinder 100 bar, mounting dimensions

American Petroleum Institute (API)

API MPMS 21.2-1998(2016) Electronic metering systems for fluid measurement Volumetric and turbine liquid flow meters Electronic liquid quantity measurement
API TR 2577-2018 Performance of Full-bore Vortex Meters for Measurement of Liquid Flows (FIRST EDITION)

European Committee for Standardization (CEN)

EN ISO 748:2021 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements (ISO 748:2021)
EN ISO 748:2007 Hydrometry - Measurement of liquid flow in open channels using current-meters or floats
EN ISO 748:2000 Measurement of Liquid Flow in Open Channels - Velocity-Area Methods ISO 748:1997
EN 29104:1993 Measurement of fluid flow in closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991)
EN ISO 20456:2019 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)

Underwriters Laboratories (UL)

UL 25-1990 Meters for flammable and combustible liquids and LP-gas
UL 25-1996 Meters for flammable and combustible liquids and LP-gas
UL 2585 BULLETIN-2008 UL Standard for Safety OUTLINE OF INVESTIGATION FOR REBUILT FLAMMABLE LIQUID METERS

Swedish Institute for Standards

SS-ISO 21903:2020 Refrigerated hydrocarbon fluids - Dynamic measurement - Requirements and guidelines for the calibration and installation of flowmeters used for liquefied natural gas (LNG) and other refrigerated hydrocarbon fluids (ISO 21903:2020, IDT)
SS-ISO 6264:2003 Hydraulic fluid power - Pressure-relief valves - Mounting surfaces
SS-EN ISO 20456:2019 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)

ET-QSAE

ES A.D5.100-1973 Flowmeter Liquid Fuel Measuring Equipment

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 12242:2015 Measurement of fluid flow in closed conduits -- Ultrasonic transit-time meters for liquid
OS GSO ISO 6817:2008 Measurement of conductive liquid flow in closed conduits-Method using electromagnetic, flowmeters
OS GSO ISO 748:2008 Hydrometry — Measurement of liquid flow in open channels using current-meters or floats
OS GSO ISO/TS 15768:2015 Measurement of liquid velocity in open channels -- Design, selection and use of electromagnetic current meters

Danish Standards Foundation

DANSK DS/ISO 9104:1993 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids
DANSK DS/EN 29104:1993 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids
DS/EN 29104:1994 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids
DS/ISO 9104:1994 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids
DS/EN 29104:1993 Measurement of fluid flow in closed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids
DANSK DS/EN ISO 6817:1996 Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters
DANSK DS/EN ISO 20456:2019 Measurement of fluid flow in closed conduits – Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)
DS/EN ISO 748:2008 Hydrometry - Measurement of liquid flow in open channels using current-meters or floats
DANSK DS/ISO 21903:2020 Refrigerated hydrocarbon fluids – Dynamic measurement – Requirements and guidelines for the calibration and installation of flowmeters used for liquefied natural gas (LNG) and other refrigerated hydrocarbon fluids
DS/EN ISO 6817:1996 Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters
DANSK DS/ISO 24062:2024 Measurement of fluid flow in closed conduits – Clamp-on ultrasonic transit-time meters for liquids and gases
DANSK DS/EN ISO 748:2007 Hydrometry – Measurement of liquid flow in open channels using current-meters or floats

Standards Norway

NS-ISO 9104:1991 Measurement of fluid flow in closed conduits — Methods of evaluating the performance of electromagnetic flow-meters for liquids
NS-ISO 4373:1995 Measurement of liquid flow in open channels — Water-level measuring devices
NS-EN 29104:1993 Measurement of fluid flow in closed conduits — Methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991)
NS-EN ISO 20456:2019 Measurement of fluid flow in closed conduits — Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)

Gosstandart of Russia

GOST 8.451-2024 State system for ensuring the uniformity of measurements. Chamber liquid meters. Verification methodology
GOST 15528-1986 Instruments for measuring flowrate, volume or mass of flowing fluid and gas. Terms and definitions
GOST 8.407-1980 State system for ensuring the uniformity of measurements incompressible liquid flowmeters. Standardizes metrological characteristics

Spanish Association for Standardization (UNE)

UNE-EN ISO 20456:2021 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)
UNE-EN 29104:1996 MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS. METHODS OF EVALUATING THE PERFORMANCE OF ELECTROMAGNETIC FLOW-METERS FOR LIQUIDS. (ISO 9104:1991).
UNE-ISO 13689:2005 Refrigerated light hydrocarbon fluids -- Measurement of liquid levels in tanks containing liquefied gases -- Microwave-type level gauge.
UNE-ISO 10574:2005 Refrigerated light-hydrocarbon fluids -- Measurement of liquid levels in tanks containing liquefied gases -- Float-type level gauges

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 20456:2022 Measurement of fluid flow in closed conduits — Guidance for the use of electromagnetic flowmeters for conductive liquids
BH GSO ISO 10790:2017 Measurement of fluid flow in closed conduits -- Guidance to the selection, installation and use of Coriolis flow meters (mass flow, density and volume flow measurements)
BH GSO ISO 6264:2016 Hydraulic fluid power -- Pressure-relief valves -- Mounting surfaces

Aerospace, Security and Defence Industries Association of Europe (ASD)

ASD-STAN TR 2674:1970 Design and construction of pipeline for fluids in liquid or gaseous condition - Rigid lines, installation

NL-NEN

NEN-ISO 9104:1994 Measurement of fluid flow in xlosed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991)

Lithuanian Standards Office

LST EN 29104-2001 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991)

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 41.8-1989 Standard Methods of Measurement of Flow of Liquids in Pipes Using Orifice Flowmeters

Association of German Mechanical Engineers

VDI VDE 2642-1991 Measurement of Liquid Flow by Means of Ultrasonic Flowmeters in Fully Filled Circular Cross-Section Closed Conduits
VDI VDE 3513 Blatt 3-1989 Variable-Area Flowmeters - Selection and Installation
VDI/VDE 2642-1989 Ultraschall-Durchflussmessung von Fluessigkeiten in voll durchstroemten Rohrleitungen

Military Standards (MIL-STD)

MIL MIL-F-24701-1988 FLOWMETER, LIQUID, VLTRASONIC, NON INTRUSIVE

CENELEC - European Committee for Electrotechnical Standardization

EN 60534-2-1:1998 Industrial-Process Control Valves - Part 2-1: Flow Capacity - Sizing Equations for Fluid Flow under Installed Conditions

IT-UNI

UNI ISO 5783:2020 Hydraulic fluid power -- Code for identification of valve mounting surfaces and cartridge valve cavities

VN-TCVN

TCVN 6816-2001 Measurement of fluid flow in closed conduits.Methods using transit-time ultrasonic flowmeters

BE-NBN

NBN E 17-102-1984 Flow meter for drinking cold water. Installation conditions

ISA - International Society of Automation

ISA RP31.1-1977 Specification@ Installation@ and Calibration of Turbine Flowmeters

Others: Applications of Liquid Flow Meters,Use of liquid flow meters,Flange Mounted Liquid Flow Meters,A Better Liquid Flow Meter,Liquid flow meter installation requirements,Development of Liquid Flow Meter,Liquid Flow Meter Installation,Liquid Flow Meter Design,How to install the liquid flow meter,Liquid flow meter installation requirements,Measurement method of liquid flowmeter,Practical Liquid Flow Meter,Symbols for liquid flow meters,How to install the liquid flow meter,The quality of the liquid flow meter,Future Development of Liquid Flow Meters,Flowmeters for measuring liquids,Liquid Flow Meter Installation,Installation requirements for turbine flowmeters