Cable Tester Quality

Cable Tester Quality, Total:309 items.

The international standard classification for "Cable Tester Quality" includes: Coaxial cables. Waveguides , Electrical wires and cables , Measurement of electrical and magnetic quantities , Test conditions and procedures in general , Analytical chemistry in general , Education , Environmental testing , Paper and board , Non-destructive testing , Power stations in general , Measuring instruments , Exploratory and extraction equipment .

The Chinese standard classification for "Cable Tester Quality" includes: Wave guide coaxial component and accessory , Cable and its accessory , Electronic measurement and equipment in general , Basic standards and general methods , Electrochemical, thermochemistry and optical profile type analyzer , Special instruments for teaching , Basic laboratory equipment , Paper , X ray, magnetic powder, fluorescent light and other defectoscope , Electric power testing technique , Machinery and instrument manufacturing industry engineering , Power station engineering , Petroleum drilling & production equipment and instrument , Material composition analysis instrument and environment detection instrument in general , Standardization and quality management .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 11463-1989 Reliability test for electronic measuring instruments
GB/T 6833.2-1987 Electromagnetic compatibility test specification for electronic measuring instruments--Magnetic field susceptibility test
GB/T 6587.3-1986 Humidity tests for electronic measuring instruments
GB/T 11463-1989 Reliability test for electronic measuring instruments
GB/T 27762-2011 Standard test method for mass scale calibration of thermogravimetric analyzers
GB/T 6587.5-1986 Shock tests for electronic measuring instruments
GB/T 3334-1999 Method of test for dissipation factor （ tgδ）of cable paper at power frequence （Schering bridge method）
GB/T 6833.9-1987 Electromagnetic compatibility test specification forelectronic measuring instruments--Conduced interference test
GB/T 29252-2012 Rule of the quality inspection of laboratory instruments and equipments
GB/T 17737.105-2018 Coaxial communication cables—Part 1-105: Electrical test methods—Test for withstand voltage of cable dielectric
GB/T 6833.10-1987 Electromagnetic compatibility test specification for electronic measuring instruments--Radiated interference test
GB/T 6587.2-1986 Temperature tests for electronic measuring instruments
GB/T 25472-2010 Quality inspection provisions for analyzers
GB/T 13166-1991 Design margin and abuse tests for electronic measuring instruments
GB/T 6593-1996 Quality inspection provisions for electronic measuring instruments
GB/T 17737.102-2018 Coaxial communication cables—Part 1-102: Electrical test methods—Test for insulation resistance of cable dielectric
GB/T 6587.7-1986 Basic safety tests for electronic measuring instruments
GB/T 6587.1-1986 Environmental tests program for electronic measuring instruments
GB/T 6587.8-1986 Line frequency and voltage tests for electronic measuring instruments
GB/T 3048.11-1994 Test methods for determining electrical properties of electric cables and wires-Dielectric dissipation factor measurement
GB/T 6587.4-1986 Vibration tests for electronic measuring instruments
GB/T 6833.5-1987 Electromagnetic compatibility test specification for electronic measuring instruments--Radiated susceptibility test
GB/T 32195-2015 Non-destructive testing instruments―Quality inspection provisions
GB/T 3048.11-2007 Test methods for electrical properties of electric cables and wires—Part 11:Test for dielectric dissipation factor
GB/T 6587.6-1986 Transportation tests for electronic measuring instruments
GB/T 6833.6-1987 Electromagnetic compatibility test specification for electronic measuring instruments--Conducted susceptibility test
GB/T 6833.3-1987 Electromagnetic compatibility test specification for electronic measuring instruments--Electrostatic discharge susceptibility test
GB/T 40890-2021 General quality requirements and test methodsfor the teaching vitreous equipment

Hubei Provincial Standard of the People's Republic of China

DB42/T 401-2006 Verification Criterion Of Voltage Quality Monitoring Meter

Professional Standard - Energy and Power Planning

DL/T 1028-2006 Verification code for power quality analyzer
DL/T 5161.5-2002 Specification for construction quality checkout and evaluation of electric equipment installation Part 5: Cable line
DL/T 913-2005 Quality inspection guide for water quality analyzers in thermal power plant
DL/T 1029-2022 Guideline for laboratory quality management of water quality instruments in power plants
DL/T 1029-2006 Laboratory quality management guide for water quality analyzers in thermal power plant
DL/T 913-2020 Quality inspection guide for water quality analyzers in power plant
DL/T 5161.5-2018 Specification for construction quality checkout and evaluation of electric equipment installation-Part 5:Cable line
DL/T 1694.6-2020 Calibration specification for high voltage testing instruments一Part 6: Very low frequency dielectric loss detector for power cable

Professional Standard - Petroleum

SY/T 6482-2019 Data transmission cable tester
SY/T 6482-2000 Data transmission cable tester

Professional Standard - Machinery

JB/T 4278.8-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 8:Low temperature test oven
JB/T 4278.19-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 19:Insulation scrape abrasion test device
JB/T 4278.1-1993 General rules for verification methods of rubber and plastic wire and cable test equipment
JB/T 4278.3-1993 Rubber plastic wire and cable test equipment verification method flexural test device
JB/T 4278.7-1993 Rubber plastic wire and cable test equipment verification method constant temperature water tank
JB/T 4278.5-1993 Rubber plastic wire and cable test equipment verification method single wire and cable vertical combustion DZ-1 method test device
JB/T 4278.18-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 18:Copper single insulated wire and cable vertical burning test device
JB/T 4278.11-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 11:Low temperature bendingt test device
JB/T 4278.10-1993 Rubber plastic wire and cable test equipment verification method spark testing machine
JB/T 4278.6-1993 Rubber plastic wire and cable test equipment verification method natural ventilation thermal aging test chamber
JB/T 6851-1993 Analysis Instrument Quality Inspection Rules?
JB/T 4278.4-1993 Rubber plastic wire and cable test equipment verification method wear-resistant test device
JB/T 4278.2-1993 Rubber plastic wire and cable test equipment verification method low temperature impact test device
JB/T 4278.16-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 16:Smoke density test device
JB/T 4278.4-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 4:Abrasion test device
JB/T 4278.14-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 14:Fire-resisting test device
JB/T 4278.3-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 3:Flexing test device
JB/T 4278.10-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 10:Spark tester
JB/T 4278.9-1993 Rubber plastic wire and cable test equipment verification method Oxygen bomb, air bomb aging test chamber
JB/T 4278.8-1993 Rubber plastic wire and cable test equipment verification method low temperature test chamber
JB/T 4278.5-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 5:Single insulated wire and cable vertical burning test device
JB/T 4278.17-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 17:Carbon black content test device

Group Standards of the People's Republic of China

T/JSEE 004-2024 Coiled cable field tester
T/CAMS 127-2023 Cable insulation thickness tester

Professional Standard - Geology

DZ 0041-1992 Quality inspection rule of geological instrument product
DZ 30-1984 Quality Inspection Rules for Geological Instrument Products

National Metrological Technical Specifications of the People's Republic of China

JJF(机械) 1042-2020 Calibration Specifications for Cable Fault Testers
JJF(机械)1042-2020 Calibration Specifications for Cable Fault Testers

Professional Standard - Education

JY/T 0423-2011 General quality requirements and test methods for teaching glass instruments

Taiwan Provincial Standard of the People's Republic of China

CNS 5477-1980 Method of Test for Constancy of Mass on Ignition for Porcelain Laboratory Apparatus

Professional Standard - Earthquake

DB/T 27-2008 quality inspection provision for earthquake observation instrument

American National Standards Institute （ANSI)

ANSI/NEMA ICEAT-27-581-2008 Standard Test Methods for Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test
ANSI/ICEA T-26-465-2013 Guide For Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test
ANSI/ASTM D6113:2010 Test Method for Using a Cone Calorimeter to Determine Fire-test-response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ANSI/ASTM D6113:2009 Test Method for Using a Cone Calorimeter to Determine Fire-test-response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ANSI/IEEE 532:2007 Guide for Selecting and Testing Jackets for Power, Instrumentation and Control Cables
ANSI/ASTM D5537:2010 Test Method for Heat Release, Flame Spread and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
ANSI/ICEA S-532-1973 Control, Thermocouple Extension and Instrumentation Cables
ANSI/TIA-1152-2009 Requirements for Field Test Instruments and Measurements for Balanced Twisted-Pair Cabling

PL-PKN

PN E04160 ArkusZ05-1973 Electric caibles Methods of testing Verification of the ?uality of the silvering
PN E04160 ArkusZ37-1973 Elec?rlc cables Me?hods ot ?es?ing Test for resistance to the action of chemical subs?ances vapours
PN-EN IEC 60332-3-10-2018-12/A11-2021-07 E Tests on electric and optical fibre cables under fire conditions -- Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables -- Apparatus
PN E04160-25-1989 Electric cables Methods of testing Bending test for the flexible cables
PN E08120-1986 Electrical measuring instruments Safety requirements and tests

Bureau of Indian Standards

IS 10810-10-1984 Methods of test for cables:Part 10 Loss of mass test
IS 10810-41-1984 Methods of test for cables:Part 41 Mass of zinc coating on steel armour
IS 10810-24-1984 Methods of test for cables:Part 24 Water soluble impurities test of insulating paper
IS 10810-32-1984 Methods of test for cables:Part 32 Carbon content test for polyethylene
IS 10810-33-1984 Methods of test for cables:Part 33 Water absorption test (Gravimetric)
IS 10810-27-1984 Methods of Test for Cables - Part 27 : Ash Content Test of Insulating Paper
IS 10810-62-1993 Methods of test for cables: Part 62 Fire resistance test for bunched cables

German Institute for Standardization

DIN VDE 0472-801:1986 Testing of cables, wires and flexible cords; quality of zinc coatings
DIN EN 62052-11:2003 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment (IEC 62052-11:2003); German version EN 62052-11:2003
DIN VDE 0472-801:1986-03 Testing of cables, wires and flexible cords; quality of zinc coatings
DIN EN 50267-1:1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 1: Apparatus; German version EN 50267-1:1998
DIN EN 50267-1 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 1: Apparatus
DIN EN 60811-409 E:2010-10 Draft Document - Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths (IEC 20/1145/CDV:2010); German version FprEN 60811-409:2010
DIN EN 60885-3:2004 Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables (IEC 60885-3:1988); German version EN 60885-3:2003
DIN EN 4057-202:2007 Aerospace series - Cable ties for harnesses - Test methods - Part 202: Examination of mass and dimensions; German and English version EN 4057-202:2005
DIN EN 50399:2012 Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results; German version EN 50399:2011
DIN EN 60811-407 E:2010-10 Draft Document - Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds (IEC 20/1143/CDV:2010); German version FprEN 60811-4...

British Standards Institution (BSI)

BS EN 3475-414:2005 Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
BS EN 3475-414:2006 Aerospace series. Cables, electrical, aircraft use. Test methods. Differential scanning calorimeter (DSC test)
BS EN 3475-202:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Mass
BS EN 60811-409:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Loss of mass test for thermoplastic insulations and sheaths
BS EN 60811-407:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Measurement of mass increase of polyethylene and polypropylene compounds
BS EN 60512-17-2:2011 Connectors for electronic equipment. Tests and measurements. Cable clamping tests. Test 17b. Cable clamp resistance to cable rotation
BS EN 50399:2011+A1:2016 Common test methods for cables under fire conditions. Heat release and smoke production measurement on cables during flame spread test. Test apparatus, procedures, results
BS EN 50399:2011 Common test methods for cables under fire conditions. Heat release and smoke production measurement on cables during flame spread test. Test apparatus, procedures, results
BS EN 60332-3-10:2009 Tests on electric and optical fibre cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
BS EN 60332-3-10:2010 Tests on electric and optical fibre cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Apparatus
BS EN 60885-3:2003 Electrical test methods for electric cables - Test methods for partial discharge measurements on lengths of extruded power cables
09/30192998 DC BS EN 60811-409. Electric and optical fibre cables. Test methods for non-metallic materials. Part 409. Environmental tests. Loss of mass test for thermoplastic insulations and sheaths
BS EN 62586-1:2017 Power quality measurement in power supply systems. Power quality instruments (PQI)
08/30178414 DC BS EN 60512-17-2. Connectors for electronic equipment. Tests and measurements. Part 17-2. Cable clamping tests. Test 17b. Cable clamp resistance to cable rotation
BS EN 60811-203:2012 Electric and optical fibre cables. Test methods for non-metallic materials. General tests. Measurement of overall dimensions
09/30192990 DC BS EN 60811-407. Electric and optical fibre cables. Test methods for non-metallic materials. Part 407. Environmental tests. Measurement of mass increase of polyethylene and polypropylene compounds
BS EN 6059-202:2016 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Dimensions and mass
08/30178422 DC BS EN 60512-17-4. Connectors for electronic equipment. Tests and measurements. Part 17-4. Cable clamping tests. Test 17d. Cable clamp resistance to cable torsion
BS EN 60811-201:2012 Electric and optical fibre cables. Test methods for non-metallic materials. General tests. Measurement of insulation thickness
BS EN 4057-202:2005 Cable ties for harnesses — Test methods — Part 202: Examination of mass and dimensions
BS EN 4057-202:2006 Aerospace series - Cable ties for harnesses - Test methods - Examination of mass and dimensions
09/30198606 DC BS EN 60332-3-10. Tests on electric and optical fibre cables under fire conditions. Part 3-10. Test for vertical flame spread of vertically-mounted bunched wires or cables. Apparatus
08/30178418 DC BS EN 60512-17-3. Connectors for electronic equipment. Tests and measurements. Part 17-3. Cable clamping tests. Test 17c. Cable clamp resistance to cable pull (tensile)
BS EN 60885-3:2015 Electrical test methods for electric cables. Test methods for partial discharge measurements on lengths of extruded power cables
11/30257861 DC BS EN 60885-3. Electrical test methods for electric cables. Part 3. Test methods for partial discharge measurements on lengths of extruded power cables

RO-ASRO

STAS 11190/3-1980 Electronic measuring instruments STABILIZED POWER SUPPLIES FOR MEASURING General prescriptions lor measuring tests

IT-UNI

UNI 7648-1976 Lead alloy for cable braiding. Quality, regulations, sampling and testing

Ente Nazionale Italiano di Unificazione

UNI EN 3475-302:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Mass
UNI EN 3475-414:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
UNI EN ISO 18674-2:2016 Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 2: Measurement of displacements along a line: Extensometers

Association Francaise de Normalisation

NF C32-011-409*NF EN 60811-409:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 409 : miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths
NF C93-400-17-2*NF EN 60512-17-2:2012 Connectors for electronic equipment - Tests and measurements - Part 17-2 : cable clamping tests - Test 17b : cable clamp resistance to cable rotation
NF C93-400-17-3*NF EN 60512-17-3:2011 Connectors for electronic equipment - Tests and measurements - Part 17-3 : cable clamping tests - Test 17c : cable clamp resistance to cable pull (tensile).
NF L52-250-202*NF EN 3475-202:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 202 : mass
NF C93-400-17-4*NF EN 60512-17-4:2011 Connectors for electronic equipment - Tests and measurements - Part 17-4 : cable clamping tests - Test 17d : cable clamp resistance to cable torsion
NF C32-073-1:1993 MEASUREMENT OF SMOKE DENSITY OF ELECTRIC CABLES BURNING UNDER DEFINED CONDITIONS. PART 1 : TEST APPARATUS.
NF EN 60811-407:2012 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 407: miscellaneous tests - Measurement of the increase in mass of polyethylene and polypropylene blends
NF C32-011-407*NF EN 60811-407:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407 : miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
NF EN 60811-409:2012 Electrical and fiber optic cables - Test methods for non-metallic materials - Part 409: miscellaneous tests - Mass loss test of insulating envelopes and thermoplastic sheaths
NF C93-400-17-1*NF EN 60512-17-1:2011 Connectors for electronic equipment - Tests and measurements - Part 17-1 : cable clamping tests - Test 17a : cable clamp robustness
NF L52-252-202*NF EN 4057-202:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 202 : examination of mass and dimensions.
NF C32-049-3:2004 Electrical test methods for electric cables - Part 3 : test methods for partial discharge measurements on lengths of extruded power cables.
NF C32-041/A1*NF EN 50396/A1:2012 Non electrical test methods for low voltage energy cables
NF C32-073-1:2000 Common test methods for cables under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 1 : apparatus.
NF C32-074-1:2000 Common test methods for cables under fire conditions - Test on gases evolved during combustion of materials from cables - Part 1 : apparatus.
NF C32-075-1:1999 Common test methods for cables under fire conditions - Test for resistance to vertical flame propagation for a single insulated conductor or cable - Part 1 : apparatus.
NF C32-030/A2:2004 Insulating and sheathing materials of electric and optical cables - Common test methods - Part 3-2 : methods specific to PVC compounds - Loss of mass test - Thermal stability test.
NF C32-049-3*NF EN 60885-3:2015 Electrical test methods for electric cables - Part 3 : test methods for partial discharge measurements on lengths of extruded power cables
NF C93-537-1-3*NF EN 50289-1-3:2001 Communication cables - Specifications for test methods - Part 1-3 : electrical test method - Dielectric strengh
NF EN 60885-3:2015 Electrical test methods for electrical cables - Part 3: test methods for measuring partial discharges on lengths of extruded power cables
NF EN 50399:2022 Common test methods for cables subjected to fire - Measurement of heat and smoke released by cables during the flame propagation test - Test apparatus, procedure and results

Korean Agency for Technology and Standards (KATS)

KS C IEC 61196-1-105-2014(2024) Coaxial communication cables — Part 1-105: Electrical test methods — Test for withstand voltage of cable dielectric
KS C IEC 61196-1-105:2014 Coaxial communication cables — Part 1-105: Electrical test methods — Test for withstand voltage of cable dielectric
KS C IEC 61034-1:2008 Measurement of smoke density of cables burning under defined conditions － Part 1: Test apparatus
KS C IEC 61196-1-105-2019 Coaxial communication cables — Part 1-105: Electrical test methods — Test for withstand voltage of cable dielectric
KS C IEC 60885-3-2019(2024) Electrical test methods for electric cables — Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
KS C IEC 60332-3-10-2021 Tests on electric and optical fibre cables under fire conditions —Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables — Apparatus
KS C IEC 60811-407-2016(2021) Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 407: Miscellaneous tests ― Measurement of mass increase of polyethylene and polypropylene compounds
KS C IEC 60332-3-10:2021 Tests on electric and optical fibre cables under fire conditions —Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables — Apparatus
KS C IEC 60332-3-10:2003 Tests on electric cables under fire conditions － Part 3 － 10: Test for vertical flame spread of vertically － mounted bunched wires of cables, apparatus
KS C IEC 60811-409-2020 Electric and optical fibre cables — Test methods for non-metallic materials — Part 409: Miscellaneous tests — Loss of mass test for thermoplastic insulations and sheaths
KS C IEC 60885-3:2003 Electrical test methods for electric cables － Part 3: Test methods for partial discharge measurements on lengths of extruded power cables

Danish Standards Foundation

DANSK DS/IEC 61196-1-105:2006 Coaxial communication cables - Part 1-105: Electrical test methods - Test for withstand voltage of cable dielectric
DS/EN 3475-414:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
DANSK DS/IEC 61196-1-102:2006 Coaxial communication cables - Part 1-102: Electrical test methods - Test for insulation resistance of cable dielectric
DS/EN 60512-17-4:2010 Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion
DANSK DS/EN 60332-1-1/A1:2004 Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
DANSK DS/EN 60332-1-1:2004 Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
DS/EN 60332-1-1:2005 Tests on electric and optical fibre cables under fire conditions -- Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
DS/EN 60512-17-3:2010 Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)
DS/EN IEC 60332-3-10:2020 Tests on electric and optical fibre cables under fire conditions – Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables – Apparatus
DS/EN 60512-17-2:2011 Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation
DS/EN 60811-409:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths
DS/EN 3475-202:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 202: Mass
DS/EN 60811-407:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
DS/EN 60332-2-1:2005 Tests on electric and optical fibre cables under fire conditions -- Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus
DANSK DS/EN 3475-202:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 202: Mass
DANSK DS/EN 50267-1:1998 Common test methods for cables under fire conditions – Tests on gases evolved during combustion of material from cables – Part 1: Apparatus
DS/EN 60885-3:2007 Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
DANSK DS/EN 60885-3:2015 Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
DANSK DS/EN 60811-409:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths

Japanese Industrial Standards Committee (JISC)

JIS C 3665-1-1:2007 Tests on electric and optical fibre cables under fire conditions -- Part 1-1: Test for vertical flame propagation for a single insulated wire or cable -- Apparatus
JIS C 5402-17-4:2015 Connectors for electronic equipment -- Tests and measurements -- Part 17-4: Cable clamping tests -- Test 17d: Cable clamp resistance to cable torsion
JIS C 5402-17-2:2015 Connectors for electronic equipment -- Tests and measurements -- Part 17-2: Cable clamping tests -- Test 17b: Cable clamp resistance to cable rotation
JIS C 5402-17-1:2015 Connectors for electronic equipment -- Tests and measurements -- Part 17-1: Cable clamping tests -- Test 17a: Cable clamp robustness
JIS B 7615:2013 Electronic measuring instruments.Electromagnetic environment test method
JIS C 5402-17-3:2018 Connectors for electronic equipment -- Tests and measurements -- Part 17-3: Cable clamping tests -- Test 17c: Cable clamp resistance to cable pull (tensile)

The Directorate General of Specifications and Metrology (DGSM)

OS GSO IEC 61196-1-105:2014 Coaxial communication cables - Part 1-105: Electrical test methods - Test for withstand voltage of cable dielectric
OS GSO IEC 61196-1-102:2014 Coaxial communication cables - Part 1-102: Electrical test methods - Test for insulation resistance of cable dielectric
OS GSO IEC 61196-1-102:2016 Coaxial communication cables - Part 1-102: Electrical test methods - Test for insulation resistance of cable dielectric
OS GSO IEC 60885-3:2002 Electical test methods for electric cables - Part 3 : Test methods for partial discharge measurements on lengths of extruded power cable .

European Committee for Electrotechnical Standardization（CENELEC）

EN 50399:2022 Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results
EN 50399:2011 Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results
EN 60512-17-4:2010 Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion
EN 60512-17-3:2010 Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)
EN 60811-409:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths
EN 60811-407:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
EN 60512-17-2:2011 Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation
EN 60885-3:2015 Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
EN 60885-3:2003 Electrical test methods for electric cables Part 3: Test methods for partial discharge measurements on lengths of extruded power cables (Remains Current)
EN 50289-1-3:2001 Communication Cables - Specifications for Test Methods Part 1-3: Electrical Test Methods - Dielectric Strength

International Electrotechnical Commission (IEC)

IEC 60811-409:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths
IEC 61196-1-102:2025 RLV Coaxial communication cables - Part 1-102: Electrical test methods - Test for insulation resistance of cable dielectric
IEC 61196-1-102:2005 Coaxial communication cables - Part 1-102: Electrical test methods - Test for insulation resistance of cable dielectric
IEC 61196-1-105:2005 Coaxial communication cables - Part 1-105: Electrical test methods - Test for withstand voltage of cable dielectric
IEC 61034-1:1990 Measurement of smoke density of electric cables burning under defined conditions; part 1: test apparatus
IEC 60512-17-2:2011 Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation
IEC 61196-1-103:2015 Coaxial communication cables - Part 1-103: Electrical test methods - Test for capacitance of cable
IEC 60512-17-4:2010 Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion
IEC 61196-1-103:2005 Coaxial communication cables - Part 1-103: Electrical test methods - Test for capacitance of cable
IEC 60512-17-3:2010 Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)
IEC 60332-3-10:2018 RLV Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
IEC 60512-17-1:2010 Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness
IEC 60332-3-10:2000+AMD1:2008 CSV Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
IEC 60885-3:2015 RLV Electrical test methods for electric cables — Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
IEC 60885-3:1988 Electrical test methods for electric cables; part 3: test methods for partial discharge measurements on lengths of extruded power cable
IEC 60332-3-10:2009 Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
IEC 60885-3:2015 Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
IEC 60332-3-10:2000/AMD1:2008 Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunches wires or cables - Apparatus
IEC 60332-3-10:2000 Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
IEC 60332-3-10:2018 Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus

GCC Standardization Organization

GSO IEC 61196-1-102:2016 Coaxial communication cables - Part 1-102: Electrical test methods - Test for insulation resistance of cable dielectric
BH GSO IEC 60885-3:2024 Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
GSO IEC 60885-3:2002 Electical test methods for electric cables - Part 3 : Test methods for partial discharge measurements on lengths of extruded power cable .

Lithuanian Standards Office

LST EN 3475-414-2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
LST EN 3475-202-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 202: Mass
LST EN 60811-407-2012 Electric and optical fibre cables - Test methods for non-metallic materials -- Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds (IEC 60811-407:2012)

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO IEC 61196-1-102:2017 Coaxial communication cables - Part 1-102: Electrical test methods - Test for insulation resistance of cable dielectric
BH GSO IEC 61196-1-102:2016 Coaxial communication cables - Part 1-102: Electrical test methods - Test for insulation resistance of cable dielectric
BH GSO IEC 61083-1:2023 Instruments and software used for measurements in high-voltage and high-current tests - Part 1: Requirements for instruments for impulse tests

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0472-612 DIN VDE 0472-612-1983*DIN 57472-612:1983 Testing of cables, wires and flexible cords; loss of mass by evaporation
VDE 0473-811-409-2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths (IEC 60811-409:2012); German version EN 60811-409:2012
VDE 0472-801-1986 Testing of cables@ wires and flexible cords; quality of zinc coatings
VDE 0482-332-1-1-2005 Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus (IEC 60332-1-1:2004); German version EN 60332-1-1:2004
VDE 0482-332-1-1/A1-2015 Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus (IEC 20/1477/CDV:2014); German version EN 60332-1-1:2004/FprA1:2014
VDE 0473-811-407-2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds (IEC 60811-407:2012); German version EN 60811-407:2012
VDE 0687-512-17-4-2011 Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion (IEC 60512-17-4:2010); German version EN 60512-17-4:2010
VDE 0482-332-2-1-2005 Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus (IEC 60332-2-1:2004); German version EN 60332-2-1:2004
VDE 0687-512-17-2-2012 Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation (IEC 60512-17-2:2011); German version EN 60512-17-2:2011
VDE 0482-332-1-1-2017 Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus (IEC 60332-1-1:2004 + A1:2015); German version EN 60332-1-1:2004 + A1:2015
VDE 0687-512-17-3-2011 Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile) (IEC 60512-17-3:2010); German version EN 60512-17-3:2010
VDE 0687-512-17-1-2011 Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness (IEC 60512-17-1:2010); German version EN 60512-17-1:2010
VDE 0482-399-2017 Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus@ procedures@ results; German version EN 50399:2011 + A1:2016

National Electrical Manufacturers Association（NEMA)

NEMA WC 53-2008 STANDARD TEST METHODS FOR EXTRUDED DIELECTRIC POWER, CONTROL, INSTRUMENTATION, AND PORTABLE CABLES FOR TEST

Swedish Institute for Standards

SS-EN 60332-1-1:2004 Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
SS-EN 60811-409:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths
SS-EN 60512-17-2:2011 Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation
SS-EN 60811-407:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
SS-EN 60885-3:2015 Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
SS-EN 60512-17-3:2011 Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)
SS-EN 3475-202:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 202: Mass
SS-EN 50399:2011 Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results
SS-EN 50399:2022 Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results

Spanish Association for Standardization (UNE)

UNE-EN 60332-1-1:2005 Tests on electric and optical fibre cables under fire conditions -- Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
UNE-EN 60811-409:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths
UNE-EN 60332-3-10:2009 Tests on electric and optical fibre cables under fire conditions -- Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
UNE-EN 60811-407:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
UNE-EN 60332-2-1:2005 Tests on electric and optical fibre cables under fire conditions -- Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus
UNE-EN 60811-3-2:1996 INSULATING AND SHEATHING MATERIALS OF ELECTRIC AND OPTICAL CABLES. COMMON TEST METHODS. PART 3-2: METHODS SPECIFIC TO PVC COMPOUNDS. LOSS OF MASS TEST. THERMAL STABILITY TEST.
UNE-EN 60885-3:2015 Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
UNE-EN 60885-3:2004 Electrical test methods for electric cables -- Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
UNE-EN 62586-1:2017 Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI) (Endorsed by Asociación Española de Normalización in December of 2017.)

South African Bureau of Standard

SANS 1816:2005 Electricity supply - Quality of supply: Power quality instruments
SANS 1697:2007 Verification standards for the verification of mass-measuring instruments, including commercial standard masspieces
SANS 60332-1-1:2005 Tests on electric and optical fibre cables under fire conditions Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
SANS 60332-2-1:2005 Tests on electric and optical fibre cables under fire conditions Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus

American Society for Testing and Materials (ASTM)

ASTM F1593-08(2016) Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer
ASTM F1710-08(2016) Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
ASTM D5537-99 Standard Test Method for Heat Release, Flame Spread and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
ASTM F2405-04 Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer
ASTM F2405-04(2011) Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer
ASTM D5537-08 Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
ASTM F1845-08 Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Resolution Glow Discharge Mass Spectrometer
ASTM F1845-97 Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Reduction Glow Discharge Mass Spectrometer
ASTM F1845-97(2002) Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Reduction Glow Discharge Mass Spectrometer
ASTM E2402-11 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM E2402-05 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM F1710-97(2002) Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
ASTM F1710-97 Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
ASTM D5537-18 Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable T
ASTM D5537-10 Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
ASTM E2040-08 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2040-03 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM D5537-23 Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable T
ASTM E2040-99 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2040-08(2014) Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2402-19 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers

European Association of Aerospace Industries

AECMA PREN 3475-202-1992 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 202 - Mass Issue P 1
AECMA PREN 3475-414-1999 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 414: Differential Scanning Calorimeter (DSC Test) Edition P 1

CENELEC - European Committee for Electrotechnical Standardization

EN 50268-1:1999 Common Test Methods for Cables under Fire Conditions - Measurement of Smoke Density of Cables Burning under Defined Conditions - Part 1: Apparatus
EN 50266-1:2001 Common Test Methods for Cables under Fire Conditions - Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cables - Part 1: Apparatus

International Organization for Standardization (ISO)

ISO 17123-4:2001 Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 4: Electro-optical distance meters (EDM instruments)

IN-BIS

IS 10810 Pt.10-1984 Cable Test Methods Part 10 Mass Loss Test
IS 10810 Pt.24-1984 Cable test methods Part 24 Test for water-soluble impurities in insulating paper

Gosstandart of Russia

GOST IEC 60811-407-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 407. Miscellaneous tests. Measurement of mass increase of polyethylene and polypropylene compounds
GOST IEC 60811-409-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 409. Miscellaneous tests. Loss of mass test for thermoplastic insulations and sheaths
GOST R 8.689-2009 Quality factors of electric power measuring instruments. State system for ensuring the uniformity of measurements. Test methods and equipment
GOST R IEC 60332-3-10-2005 Tests on electric and optical cables under fire conditions. Part 3-10. Flame spread of vertically-mounted bunched wires or cables. Apparatus
GOST R IEC 60332-3-10-2011 Tests on electric and optical fibre cables under fire conditions. Part 3-10. Flame spread of vertically-mounted bunched wires or cables. Apparatus
GOST R IEC 60811-3-2-1994 Methods specific to PVC compaunds of insulating and sheathing materials of electric cables. Loss of mass test. Thermal stability test

Comitato Elettrotecnico Italiano

CEI EN 60885-3:2016 Electrical test methods for electric cables Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
CEI EN 60811-409:2014 Electric and optical fibre cables - Test methods for non-metallic materials Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths

European Committee for Standardization (CEN)

EN 3475-414:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)

Standards Norway

NS-EN 3475-202:2002 Aerospace series — Cables, electrical, aircraft use — Test methods — Part 202: Mass

Magyar Szabványügyi Testület

MNOSZ 272-1951 Outdoor antenna cable quality

NL-NEN

NEN 11034-1-1993 Insulated electric cables.Measurement of smoke density when burned under defined conditions.Part 1:Test apparatus(IEC 1034-1:1990)

Indonesia Standards

SNI 04-6951.3-2003 Electrical test methods for electric cables. Part 3: Test methods for partial discharge measurement on lengths extruded power cables

CU-NC

NC 60-31-1985 Electrotechnics. Microphone Cable Quality Specifications

U.S. Air Force

AIR FORCE DI-QCIC-81611-2001 PRECISION MEASUREMENT EQUIPMENT LABORATORY (PMEL) QUALITY MANUAL

Others: Standard test method for mass loss and residual mass measurement verification of thermogravimetric analyzers,Cable Tester Quality,Wire and cable flame retardant tester