roughness film

roughness film, Total:157 items.

The international standard classification for "roughness film" includes: Paper and board , Rubber and plastics products , Properties of surfaces , Iron and steel castings , Films and sheets .

The Chinese standard classification for "roughness film" includes: Paper pulp and paperboard , Basic standards and general methods for synthetic resin and plastic , Basic standards and general methods , Casting , Plastic profile , Nonmetal material testing machine .

Group Standards of the People's Republic of China

T/SBX 064-2022 Virtual roughness meter system for skin pass unit
T/CPIA 0064-2024 Photovoltaic packaging film surface roughness test method

Taiwan Provincial Standard of the People's Republic of China

CNS 10794-1984 Instruments for the Measurement of Surface Roughness by the Stylus Method
CNS 7868-1981 Surface Roughness
CNS 10793-1984 Roughness Comparison Specimens

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1031-1995 Surface rouglness--Parameters and their values
GB/T 14234-1993 roughness for plastic parts
GB/T 13841-1992 roughness for electronic ceramic parts
GB/T 31227-2014 Test method for the surface roughness by atomic force microscope for sputtered thin films
GB/T 2679.4-1994 Paper and board—Determination of the roughness (Bendtsen method)
GB/T 15056-1994 Evaluation method on cast surface roughness
GB/T 15056-2017 Casting surface roughness-Appraising method
GB/T 14495-1993 Roughness comparison specimens for wooden pieces
GB/T 7220-1987 Surface roughness--Terminology--Measurement of surface roughness parameters

Professional Standard - Chemical Industry

HG/T 2348-1992 Tracer Method for Measurement of Surface Roughness of Polyester Film for Tape

Professional Standard - Aviation

HB 6172-1988 General Surface Roughness

Professional Standard - Military and Civilian Products

WJ/Z 314-1991 Fuze parts surface roughness

Professional Standard - Light Industry

QB/T 1056-1991 Bendtsen Roughometer
QB 1056-1991 Bentson roughness tester

National Metrological Technical Specifications of the People's Republic of China

JJF 1099-2018 Calibration Specification for Roughness Comparison Specimens

RO-ASRO

STAS R 6859-1968 Surface roughness. Roughness selection criteria
STAS 9331-1973 FINISHED PRODUCTS FROM PAPER INDUSTRY Determination of loughness by Bendtsen appawatus
STAS 7087-1982 ROUGIINESS COMPAR ISONSPEGIMENS
STAS 5730/1-1985 Surlace conditions SURFACE ROUGHNESS Terminology
STAS 12192-1984 G?ARS Choice or precisions and roughness gear
STAS 11124-1978 GROUND TALC General technical requirements for crudity

NL-NEN

NEN 3636-1980 Surface roughness - Roughness comparison specimens
NEN 3635-1980 Surface roughness - Measurement of fla roughness value
LUN 8008-1970 op documenten van de Koninklijke Luchtmacht.
NEN 3632-1986 Surface roughness - Evaluation of Ra value
NPR 3637-1994 Surface roughness. Guideline for the relation between the function of a workpiece surface and the roughness value
NEN 2012-1989 Paper and board - Determination of roughness - Bendtsen method

American Society for Testing and Materials (ASTM)

ASTM D7466-08 Standard Test Method for Measuring the Asperity Height of Textured Geomembrane
ASTM D7466-10 Standard Test Method for Measuring the Asperity Height of Textured Geomembrane
ASTM RR-D35-1012 2010 D7466-Standard Test Method for Measuring the Asperity Height of Textured Geomembrane

Standards Norway

NS 982:1969 Surface roughness, reference lengths and roughness values
NS-ISO 4287-2:1984 Surface roughness - Terminology - Part 2: Measurement of surface roughness parameters

SE-SIS

SIS SS 674-1989 Surface roughness — Guidance for the choice of surface roughness
SIS SS-ISO 4287/2:1988 Surface roughness - Terminology - Part 2: Measurement of surface rough- ness parameters
SIS 81 20 04-1973 Concrete surfaces. Roughness
SIS SS 675-1989 Surface roughness — Measurement of surface roughness by means of electrical profile recording instruments
SIS 81 20 05-1973 Concrete surfaces. Determination of surface roughness
SIS SS 81 73 46-1989 Doors — Sizes, flatness, squareness and roughness — Requirements
SIS SMS 672-1964 Drawing Rules, Declaration of Surface Roughness

Korean Agency for Technology and Standards (KATS)

KS B 0504-1975 Instruments for the measurement of surface roughness (by the nf roughness method)
KS B 0502-1976 Instruments for the measurement of surface roughness (by indicating method of Surface roughness)
KS B 0162-1999 Surface roughness-Terminology-Part 1:Surface and its parameters
KS B 0162-1999(2009) Surface roughness－Terminology－Part 1：Surface and its parameters
KS B 0507-2016 Roughness Comparison Specimens
KS B 0507-1975 Roughness Comparison Specimens
KS B 0507-1986 Roughness Comparison Specimens
KS B 0501-2001 Instruments for the measurement of surfaceroughness by the stylus method-Profile method
KS B 0161-1999(2009) Surface roughness－Definitions and designation
KS B 0161-1999 Surface roughness-Definitions and designation
KS M 3817-1982 Methods for comparison of surface roughness of plastics
KS M 3817-2004 Methods for comparison of surface roughness of plastics
KS B 0506-2016 Instruments for the Measurement of Surface Roughness by the Interferometric Method
KS B 0505-1975 Instruments for the measurement of surface roughness (by the capacitance method)
KS M 3817-2002 Methods for comparison of surface roughness of plastics
KS B 0162-2013 Surface roughness－Terminology－Part 1：Surface and its parameters
KS B 0503-1976 Instruments for the measurement of surface roughness (by light cutting method)
KS B 0506-1975 Instruments for the Measurement of Surface Roughness by the Interferometric Method
KS B 0507-1975(2011) Roughness Comparison Specimens

German Institute for Standardization

DIN 3969-1:1991-10 Surface roughness of tooth flanks; roughness parameters, surface grades
DIN 3969-1:1991 Surface roughness of tooth flanks; roughness parameters, surface grades
DIN 38455:2022-11 Calculation of the auditory sensation roughness / Note: Date of issue 2022-10-21
DIN 38455:2024 Calculation of the auditory sensation roughness
DIN 4766-1:1978 Surface roughness manufacturing method
DIN 38455 E:2022 Draft Document - Calculation of the auditory sensation roughness
DIN 4762:1989 Surface roughness terms, surfaces and their parameters

Ente Nazionale Italiano di Unificazione

UNI ISO 4287-2:1991 Surface roughness. Terminology. Measurement of surface roughness parameters.
UNI ISO 2632-3:1992 Roughness comparison specimens. Cast surfaces.
UNI ISO 248:2007 Rubber, raw - Determination of volatile- matter content

Magyar Szabványügyi Testület

MSZ 9654-1966 Surface roughness
MSZ KGST 849-1978 Roughness sample cut surface
MSZ 9654/1-1986 Cut surface roughness sample
MSZ 15-1968 Technical drawing. Mechanical drawing roughness
MSZ KGST 1632-1979 Surface roughness marking on technical drawings
MSZ KGST 638-1977 Surface roughness parameters and main values
MSZ 4722-1984 Surface roughness parameters and main parameter values

British Standards Institution (BSI)

BS 6741-2:1987 Glossary of surface roughness terms-Measurement of surface roughness parameters

CU-NC

NC 03-04-1967 Surface roughness
NC 02-10-1967 Indication of surface roughness on drawings

TR-TSE

TS 971-1971 SURFACE ROUGHNESS
TS 929-1976 INSTRUMENTS FOR THE MEASUREMENT OF SURFACE ROUGHNESS BY THE PROF?LE METHOD-VOCABULARY

Society of Automotive Engineers (SAE)

SAE AS291E-1991 Surface Texture@ Roughness@ Waviness and Lay (Reaffirmed Noncurrent May 2006)
SAE AS291A-1955 SURFACE ROUGHNESS (AA)
SAE AS291C-1963 SURFACE ROUGHNESS (AA)
SAE AS291B-1960 SURFACE ROUGHNESS (AA)
SAE AS291F Surface Texture, Roughness, Waviness and Lay
SAE AS291E Surface Texture, Roughness, Waviness and Lay
SAE AS291B Surface Texture, Roughness, Waviness and Lay
SAE AS291D Surface Texture, Roughness, Waviness and Lay
SAE AS291A Surface Texture, Roughness, Waviness and Lay
SAE AS291 Surface Texture, Roughness, Waviness and Lay
SAE AS291C Surface Texture, Roughness, Waviness and Lay
SAE AS291D-1964 Surface Texture@ Roughness@ Waviness and Lay
SAE AS291E-2001 Surface Texture, Roughness, Waviness and Lay
SAE AS291E-2006 Surface Texture, Roughness, Waviness and Lay
SAE AS291D-1995 SURFACE TEXTURE, ROUGHNESS, WAVINESS AND LAY
SAE AS291F-2014 Surface Texture, Roughness, Waviness and Lay

CH-SNV

VSM 15338.1-1955 Surface roughness. Evaluation of workpiece surfaces based on roughness

SCC

AIA NAS30 Surface Roughness Designation
AIA NAS31 Conversion Table, Surface Roughness Designations

YU-JUS

JUS M.A1.025-1981 Surface roghness of industrial products. Correlation bettveen surface roughness grade numbers and to- grade lerance grades
JUS M.A1.026-1981 Sur face roghness ofindustrial products. Correlation between the surface roughness and surface finishing process

CZ-CSN

CSN 01 4456-1983 Surface rouglmess of castings
CSN 73 2520-1993 Surface roughness of stmctures
CSN ON 01 4452-1962 Surface roughness of water pipe parts
CSN 01 4451-1980 Surface roughness. Basic pnrameters, numerical values
CSN 01 4451 Zb-1990 Surface roughness. Basic characteristic values
CSN 01 4450-1980 Surface roughness. Basic pnrameters, numerical values
CSN ON 28 2109-1964 Surface roughness of electric two-wheel parts
CSN 50 0424-1980 Roughness of páper (Parker print-surf tester)
CSN 01 3144-1980 Technical drawings. Indieation of surface roughness
CSN 02 1301-1961 Rough hexagon bolts

Danish Standards Foundation

DS/ISO 4287/2:1986 Surface roughness — Terminology Part 2: Parametres and characteristics of surface roughness

Gosstandart of Russia

GOST 7016-2013 Products of wood and wood materials. Roughness parameters
GOST R 70117-2022 Surface roughness. Selection recommendations
GOST 19948-1974 Wax-pattern dies. Surface roughness
GOST 2789-1973 Surface roughness. Parameters and characteristics
GOST 25142-1982 Surface roughness. Terms and definitions
GOST 16241-1970 Chill moulds. Roughness of surface

IN-BIS

IS 3073-1967 Assessment of surface roughness
IS 9894-1981 Test method for paper smoothness/roughness

Japanese Industrial Standards Committee (JISC)

JIS B 0659:1996 Roughness comparison specimens
JIS K 7104:1976 Methods for comparison of surface roughness of plastics
JIS R 1683:2014 Test method for surface roughness of ceramic thin films by atomic force microscopy
JIS R 1683:2007 Test method for surface roughness of ceramic thin films by atomic force microscopy

The American Road & Transportation Builders Association

AASHTO PP 37-2004 Standard Practice for Determination of International Roughness Index (IRI) to Quantify Roughness of Pavements

AASHTO - American Association of State Highway and Transportation Officials

PP 37-2004 Standard Practice for Determinination of International Roughness Index (IRI) to Quantify Roughness of Pavements

International Organization for Standardization (ISO)

ISO 4287-2:1984 Surface roughness; Terminology; Part 2 : Measurement of surface roughness parameters Trilingual edition

AT-ON

ONORM M 1117-1989 Surface roughness and workpiece function Rugosit? de surface et fonction de pi6ce usin?e
ONORM M 1116-1988 Surface roughness and ISO-tolerance quality Rugosite des surfaces et qualite de tolerance ISO
ONORM M 1118-1986 Technical surjaces; roughness comparison specimens

Standard Association of Australia （SAA）

AS 2382:1981 Surface roughness comparison specimens

BR-ABNT

ABNT NB-93-1964 Surface roughness. Brazilian Norms

Canadian Standards Association (CSA)

CSA B95-1962(R2002) Surface Texture (Roughness, Waviness and Lay)

GM North America

GM GMY220-1988 Surface Texture - Roughness, Waviness and Lay

AIA/NAS - Aerospace Industries Association of America Inc.

NAS30-1956 Surface Roughness Designation (Rev 4)

Indonesia Standards

SNI 03-1765-1990 Coarse aggregates for concrete, Test method for flat and long grains.

(U.S.) Ford Automotive Standards

FORD FLTM BA 003-1-2001 DETERMINATION OF THE SURFACE ROUGHNESS OF COLD ROLLED SHEET STEEL

United States Navy

NAVY UFGS-06 10 00-2012 ROUGH CARPENTRY

South African Bureau of Standard

SANS 938:2003 Unpolished twines

American Water Works Association (AWWA)

AWWA JAW24296 Journal AWWA — Predicting Internal Roughness in Water Mains

Spanish Association for Standardization (UNE)

UNE 56743:1988 HARDBOARDS. DETERMINATION OF SURFACE FINISH (ROUGHNESS)

CO-ICONTEC

ICONTEC 1510/1-1979 Rough thread of high hardness polyester fiber

American National Standards Institute （ANSI)

ANSI/ASME B46.1-2009 Surface Texture, Surface Roughness, Waviness and Lay

VN-TCVN

TCVN 3226-2001 Paper and board.Determination of roughness.Bendtsen method

AGMA - American Gear Manufacturers Association

12FTM20-2012 The Effect of the Surface Roughness Profile on Micropitting

National Association of Corrosion Engineers (NACE)

NACE SP0616-2022 Standard for Hull Roughness Measurements on Ship Hulls in Dry Dock

PL-PKN

PN M82030-1959 Rough plain washers

Swedish Institute for Standards

SS 817346:1989 Doors - Sizes, flatness, squareness and roughness- Requirements

American Society of Mechanical Engineers (ASME)

ASME B46.1-1985 Surface texture (surface roughness, waviness, and lay)
ASME B46.1-1978 Surface Texture (Surface Roughness, Waviness, and Lay)
ASME B46.1-1962 Surface Texture (Surface Roughness, Waviness, and Lay)

Association of German Mechanical Engineers

VDI/VDE 2602 Blatt 2-2008 Roughness measurement - Roughness measurement using contact (stylus) instruments - Profile method - Setup, measurement conditions, procedure