bend bend

bend bend, Total:215 items.

The international standard classification for "bend bend" includes: Road vehicle systems , Playgrounds , Road vehicles in general , Petroleum products and natural gas handling equipment .

The Chinese standard classification for "bend bend" includes: Automobiles in general , Toys , Basic standards and general methods , Petroleum and gas gathering and transportation , Oil and gas gathering and transportation equipment .

---

Group Standards of the People's Republic of China

• T/CTS 20-2024 Curve road warning system
• T/ITS 0091-2018 Commercial vehicle curve speed warning systems (CSWS) performance requirements and test procedures
• T/CCTAS 85-2023 Code of practice for laser high-speed deflection detection of civil airport subgrade and pavement

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

• GB 18879-2008 Safety code for summer toboggan run
• GB/T 12540-2009 Measurement method of minimum turning diameter, minimum turning circle diameter and sway value of automobiles
• GB/T 18878-2008 Technology directory for summer toboggan run
• GB/T 12540-2009 Minimum turning circle diameter minimum turning clearance circle diameter and out value test method for motor vehicles
• GB/T 39323-2020 Performance requirement and testing method for lane keeping assist (LKA) system of passenger cars
• GB/T 18879-2020 Specifications of summer toboggan run
• GB/T 29168.4-2024 Petroleum and natural gas industries—Bends, fittings and flanges for pipeline transportation systems—Part 4: Cold bends
• GB/T 12540-2024 Minimum turning circle diameter, turning clearance circle and swing-out value test method for motor vehicles and combination of vehicles

Anhui Provincial Standard of the People's Republic of China

• DB34/T 3447-2019 Inspection rules for slideway amusement facilities

Professional Standard - Agriculture

• 第2．4．5章OIE陆生动物诊断试验和疫苗手册-第七版 Cattle disease - campylobacteriosis of bovine genital tract

Taiwan Provincial Standard of the People's Republic of China

• CNS 9387-1982 Service Brake Curved Road Test Procedure for Combinations
• CNS 9244-1982 Pylon Course Slalom Test Procedure for Automobiles

Professional Standard - Civil Aviation

• MH/T 6052-2009 Baggage Handling System - Curve Belt Convoy

Professional Standard - Coal

• MT/T 557-1996 Cold-formed Square Hollow Steel for Vertical Shaft Guide

Professional Standard - Petroleum

• SY/T 0084-1994 Standard test method for ring bendability of pipeline coatings
• SY/T 0084-2012 Standard Test Methods for Ring Bendabity of Pipeline Coatings
• SY/T 4127-2018 Specifications for fabrication and acceptance of steel cold bending pipe
• SY/T 0038-1997 Test method for specific bendability of pipeline coatings
• SY/T 0038-2013 Test Method for Specific Bendability of Pipeline Coatings
• SY/T 4127-2014 Specifications for fabrication and acceptance of steel cold bending pipe

Professional Standard - Commodity Inspection

• SN/T 1086-2011 Quarantine Protocol for Bovine Genital Campylobacteriosis

Professional Standard - Chemical Industry

• HG/T 2131～2135-2021 Glass-lined 30° elbow, 45° elbow, 60° elbow, 90° elbow and 180° elbow (2021)

Magyar Szabványügyi Testület

• MNOSZ 8841-1955 The flue turns
• MSZ MI 10 137-1981 Curved steel pipe structure for small equipment

Defense Logistics Agency

• DLA AN915 REV 13-2013 ELBOW, PIPE, 45°
• DLA MS39230 REV B VALID NOTICE 5-2012 Elbow, Pipe-Street, 90 DEG (150 and 300 LBS)
• DLA A-A-59450 A-2013 ELBOWS, TUBE, STREET, 90 AND 45 DEGREE, SOLDER-JOINT, REFRIGERATION
• DLA AN915 REV 12-2011 ELBOW, PIPE, 45?[Use: SAE AS4855A, SAE AS4855A, SAE AS4855, SAE AS4855]
• DLA MIL-DTL-52618/1 E-2012 FITTINGS, PIPE, ALUMINUM-ALLOY THREADED, 150-POUND, 90-DEGREE ELBOWS, TEES, CROSSES, 45-DEGREE ELBOWS AND COUPLINGS (STRAIGHT SIZES)
• DLA MS51845 REV D-2009 ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 90-DEG STRAIGHT, CLASS 125
• DLA MS14307 REV B REINST NOTICE 2-2000 ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 45-DEG., STREET, CLASS 125
• DLA MS14307 REV C-2009 ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 45-DEG., STREET, CLASS 125
• DLA MS14307 REV B-1994 ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 45-DEG., STREET, CLASS 125

ESDU - Engineering Sciences Data Unit

• ESDU 83037 C-1995 Pressure losses in curved ducts: single bends
• ESDU 83037 D-2007 Pressure losses in curved ducts: single bends.
• ESDU 77029-1977 PRESSURE LOSSES IN CURVED DUCTS: COILS
• ESDU 77029 C-2007 Pressure losses in curved ducts: coils.
• ESDU 77009 B-2007 Pressure losses in curved ducts: interaction factors for two bends in series.
• ESDU 77009 A-1990 PRESSURE LOSSES IN CURVED DUCTS: INTERACTION FACTORS FOR TWO BENDS IN SERIES

SCC

• ADS AS47841-848 Adaptor, Elbow, Pipe
• ADS AS47981-988 Adaptor, Elbow, Pipe
• ADS AS47851-858 Adaptor, Elbow, Pipe
• ADS AS47861-868 Adaptor, Elbow, Pipe
• ADS AS47971-978 Adaptor, Elbow, Pipe
• ADS AS47991-998 Adaptor, Elbow, Pipe
• ADS AS27650-699 Adaptor, Elbow, Pipe (for Inch Pipes)
• ADS AS63050-099 Adaptor, Elbow, Pipe (for Inch Pipes)
• ADS AS63000-049 Adaptor, Elbow, Pipe (for Inch Pipes)
• ADS AS27700-749 Adaptor, Elbow, Pipe (for Metric Pipes)
• ADS AS63150-199 Adaptor, Elbow, Pipe (for Metric Pipes)
• ADS AS27750-799 Adaptor, Elbow, Pipe (for Metric Pipes)
• PIP PLE00005-2021 Pipeline System Bends [New Practice]

CZ-CSN

• CSN ON 13 2657-1966 Pipe elbow R? 4JS Jt40
• CSN 23 0463-1961 Pliers for beuding casing couduits
• CSN ON 13 2659-1966 Pipe Elbow R
• CSN 06 8618-1966 Smoke pipes, elbows and accessories of smoke flues
• CSN 13 2604-2001 Pipe bends - Technical delivery code
• CSN 13 2116-1983 Pipe-Bend with Round Clean-out Holes
• CSN 13 2605-1962 Pipe welded bends. Technical delivery code
• CSN ON 26 4114-1964 Vertical outer elbow track conveying and derived types

Military Standards (MIL-STD)

• MIL MIL-F-1183/5-1983 FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING; ELBOW, PIPE
• MIL MIL-DTL-1183/5A-2016 FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING; ELBOW, PIPE
• DOD A-A-50990 A-1987 SOUND, URETHRAL, VAN-BUREN (CURVED)
• MIL MIL-PRF-32107/3-2002 HOSE, AIR DUCT ELBOW, ROUND
• MIL MIL-STD-1627C-1994 BENDING OF PIPE OR TUBE FOR SHIP PIPING SYSTEMS (SUPERSEDING MIL-STD-1627B)
• MIL MIL-PRF-32107/4-2002 HOSE, AIR DUCT ELBOW, HALF-ROUND
• MIL MIL-DTL-1183/11B-2016 FITTING, PIPE, CAST BRONZE, SILVER BRAZING, UNION ELBOW, PIPE & UNION TEE, PIPE
• MIL MIL-STD-1627B-1981 BENDING OF PIPE OR TUBE FO RSHIP PIPING SYSTEMS (S/S BY MIL-STD-1627C)

Society of Automotive Engineers (SAE)

• SAE AS47861-2 AS47861-868 Adaptor, Elbow, Pipe
• SAE AS47981-2 AS47981-988 Adaptor, Elbow, Pipe
• SAE AS47971-2 AS47971-978 Adaptor, Elbow, Pipe
• SAE AS47991-2 AS47991-998 Adaptor, Elbow, Pipe
• SAE AS47851-2 AS47851-858 Adaptor, Elbow, Pipe
• SAE AS47841-3 AS47841-848 Adaptor, Elbow, Pipe
• SAE AS47841-3-1990 AS47841-848 Adaptor, Elbow, Pipe
• SAE AS4856 Elbow, 90 Degrees, Pipe, Internal Thread
• SAE AS47981-2-1988 AS47981-988 Adaptor, Elbow, Pipe
• SAE AS47971-2-1988 AS47971-978 Adaptor, Elbow, Pipe
• SAE AS47851-2-1989 AS47851-858 Adaptor, Elbow, Pipe
• SAE AS4856-1995 Elbow@ 90 Degree@ Pipe@ Internal Thread
• SAE AS47991-2-1988 AS47991-998 Adaptor, Elbow, Pipe
• SAE AS47861-2-1989 AS47861-868 Adaptor, Elbow, Pipe
• SAE AS63050-1 AS63050-099 Adaptor, Elbow, Pipe (for inch Pipes)
• SAE AS5186-2015 FITTING, ELBOW, 45°, PIPE TO HOSE
• SAE AS5195C-2015 FITTING, ELBOW, 90°, FLARED TO PIPE
• SAE AS4856A-2013 FITTING, ELBOW, 90°, PIPE, INTERNAL THREAD
• SAE AS5196C Fitting, Elbow, 45°, Flared to Pipe
• SAE AS5195B Fitting, Elbow, 90°, Flared to Pipe
• SAE AS5196 Fitting, Elbow, 45°, Flared to Pipe
• SAE AS27750-4-1988 AS27750-799 Adaptor, Elbow, Pipe (for Metric Pipes)
• SAE AS5195D-2020 FITTING, ELBOW, 90°, FLARED TO PIPE
• SAE AS5186 Fitting, Elbow, 45°, Pipe to Hose
• SAE AS5195D FITTING, ELBOW, 90°, FLARED TO PIPE
• SAE AS63000-1 AS63000-049 Adaptor, Elbow, Pipe (for inch Pipes)
• SAE AS27750-4 AS27750-799 Adaptor, Elbow, Pipe (for Metric Pipes)
• SAE AS5196B Fitting, Elbow, 45°, Flared to Pipe
• SAE AS63150-1 AS63150-199 Adaptor, Elbow, Pipe (for Metric Pipes)
• SAE AS5195 Fitting, Elbow, 90°, Flared to Pipe
• SAE AS5196A Fitting, Elbow, 45°, Flared to Pipe
• SAE AS5195C Fitting, Elbow, 90°, Flared to Pipe
• SAE AS63100-1-1991 AS63100-149 Adaptor, Elbow, Pipe (for Metric Pipes)
• SAE AS63100-1 AS63100-149 Adaptor, Elbow, Pipe (for Metric Pipes)
• SAE AS5185A-2021 FITTING, ELBOW, 90°, PIPE TO HOSE
• SAE AS4854 Elbow, 90 Degrees, Pipe, Internal and External Thread
• SAE AS5196E-2022 FITTING, ELBOW, 45°, FLARED TO PIPE
• SAE AS130B-2024 Pipe bending radius (October 2024)
• SAE AS5195A Fitting, Elbow, 90°, Flared to Pipe
• SAE AS27700-4-1988 AS27700-749 Adaptor, Elbow, Pipe (for Metric Pipes)
• SAE AS5185-2015 FITTING, ELBOW, 90°, PIPE TO HOSE
• SAE AS5186A-2021 FITTING, ELBOW, 45°, PIPE TO HOSE
• SAE AS5185A Fitting, Elbow, 90°, Pipe to Hose
• SAE AS5196E FITTING, ELBOW, 45°, FLARED TO PIPE
• SAE AS27650-7 AS27650-699 Adaptor, Elbow, Pipe (for Inch Pipes)
• SAE AS27700-4 AS27700-749 Adaptor, Elbow, Pipe (for Metric Pipes)
• SAE AS63150-1-1991 AS63150-199 Adaptor, Elbow, Pipe (for Metric Pipes)
• SAE AS5196D-2020 FITTING, ELBOW, 45°, FLARED TO PIPE
• SAE AS5196C-2015 FITTING, ELBOW, 45°, FLARED TO PIPE
• SAE AS5185 Fitting, Elbow, 90°, Pipe to Hose
• SAE AS5196D FITTING, ELBOW, 45°, FLARED TO PIPE
• SAE AS5186A FITTING, ELBOW, 45°, PIPE TO HOSE
• SAE AS63050-1-1991 AS63050-099 Adaptor, Elbow, Pipe (for inch Pipes)
• SAE AS63000-1-1991 AS63000-049 Adaptor, Elbow, Pipe (for inch Pipes)
• SAE AS5196-1999 Fitting@ Elbow@ 45 Degree@ Flared to Pipe
• SAE AS27650-7-1992 AS27650-699 Adaptor, Elbow, Pipe (for Inch Pipes)
• SAE AS5195-1999 Fitting@ Elbow@ 90 Degree@ Flared to Pipe
• SAE AS5195A-2000 FITTING, ELBOW, 90 DEGREES, FLARED TO PIPE FSC 4730
• SAE AS5195C-2005 FITTING, ELBOW, 90 DEGREES, FLARED TO PIPE FSC 4730
• SAE AS5186-2000 Fitting@ Elbow@ 45 Degrees@ Pipe to Hose
• SAE AS5196C-2005 FITTING, ELBOW, 45 DEGREES, FLARED TO PIPE FSC 4730; Should be used instead of MS20823, which was Cancelled 29 Sept 2000
• SAE AS5195B-2003 FITTING@ ELBOW@ 90°@ FLARED TO PIPE
• SAE AS4854A-2003 FITTING, ELBOW, 90°, PIPE, INTERNAL AND EXTERNAL THREAD
• SAE AS4855A-2013 FITTING, ELBOW, 45°, PIPE, INTERNAL AND EXTERNAL THREAD
• SAE AS4854A-2013 FITTING, ELBOW, 90°, PIPE, INTERNAL AND EXTERNAL THREAD
• SAE J2429-2004 Free-Rolling Cornering Test for Truck Tires

German Institute for Standardization

• DIN 50139:1965 Flanging test on steel tubes
• DIN 2430-1:2009-02 Piping for pigging systems - Part 1: Pipes and elbows
• DIN 28637:1970 Cast iron pressure main pipes and flange elbows
• DIN 86090:2024 Fittings for butt welding into copper-nickel-alloy pipelines - Elbows
• DIN 86090:2024-10 Fittings for butt welding into copper-nickel-alloy pipelines Elbows
• DIN EN 1680:2023 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms; German and English version prEN 1680:2023
• DIN EN 1680:1997 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism; German version EN 1680:1997
• DIN 2430-1:2009 Piping for pigging systems - Part 1: Pipes and elbows
• DIN EN 1680:2023-11 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms; German and English version prEN 1680:2023 / Note: Date of issue 2023-10-13*Intended as re...
• DIN EN 1680:1997-03 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism; German version EN 1680:1997
• DIN 86090:2022-12 Fittings for butt welding into copper-nickel-alloy pipelines - Elbows / Note: Date of issue 2022-11-11*Intended as replacement for DIN 86090 (2008-02).
• DIN 86090:2008-02 Fittings for butt welding into copper-nickel-alloy pipelines - Elbows / Note: To be replaced by DIN 86090 (2022-12).
• DIN EN 1680 E:2023-11 Draft Document - Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms; German and English version prEN 1680:2023
• DIN EN 1680 E:2023 Draft Document - Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms; German and English version prEN 1680:2023

WRC - Welding Research Council

• BULLETIN 482-2003 SPECIAL FINITE ELEMENTS FOR PIPING ELBOWS AND BENDS AT HIGH TEMPERATURES WITH CREEP
• BULLETIN 472-2002 USING FINITE ELEMENT ANALYSIS TO DETERMINE PIPING ELBOW BENDING MOMENT (B2) STRESS INDICES
• BULLETIN 448-2000 EVALUATION OF WELDED ATTACHMENTS ON PIPE AND ELBOWS

AR-IRAM

• IRAM 2582-1962 Bendability testing of steel pipes
• IRAM 2549-1967 Pipe Elbows for Series 10 Threaded Malleable Iron Pipe Fittings
• IRAM 2550-1967 Pipe Bends for Series 10 Threaded Malleable Iron Pipe Fittings

BE-NBN

• NBN-EN 10235-1994 Metallic materials. Tube. Flanging test

Standards Norway

• NS 847:1951 Sheet metal flue or smoke pipes - Bends
• NS-EN 1680:1997 Plastics piping systems — Valves for polyethylene (PE) piping systems — Test method for leaktightness under and after bending applied to the operating mechanisms

IX-UIC

• IRS 70710-2020 Railway application Minimum track gauge in curves

RO-ASRO

• STAS 474-1984 Malleable cast iron pipes ELBOWS Dimensions
• STAS 8832-1985 Expansion bends for gas pipes U AND Z EXPANSION BENDS Dimensions

GM North America

• GM GMM108-1988 45 Degree Street Elbows General Specifications
• GM GMM109-1988 90 Degree Street Elbows General Specifications

American Welding Society (AWS)

• WRC 482:2003 Special Finite Elements for Piping Elbows and Bends at High Temperatures with Creep

YU-JUS

• JUS M.R4.031-1982 Flue gas tubes bends. Shapes and dimensions
• JUS U.C4.309-1995 Designing of roads - The roads of rare traffic - Hairpin bend

Ente Nazionale Italiano di Unificazione

• UNI 804:2007 Fire fighting equipment - Wired hose fittings
• UNI EN ISO 8331:2017 Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance
• UNI EN 16821:2017 Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Silicone rubber hoses

FI-SFS

• SFS 8963-1986 In case of interpretation disputes the Finnish text applies
• SFS 8970-1986 In case of interpretation disputes the Finnish text applies

Gosstandart of Russia

• GOST 25681-1983 Threaded pipeline connections. Rotary nipples. Design
• GOST 21859-1978 Threaded pipeline connections. Union passage elbows. Construction
• GOST 12934-1983 Roll bending machines. Parameters
• PNST 79-2016 Automobile roads of general use. Viscous petroleum road bitumens. The method determining of the flexural creep stiffness using the bending beam rheometer (BBR)
• GOST 21797-2014 Two-turn spring washers for railway track. Specifications
• GOST 25683-1983 Rotary threaded pipeline connections with a hollow bolt. Construction

International Federation of Trucks and Engines

• NAVISTAR ESP M-7.121-PP-2015 VOID - Pipe and Street Elbows - Preferred Parts (Noun Code - 2940)
• NAVISTAR ESP M-7.221-NPP-2015 VOID - Pipe and Street Elbows - Non-Preferred Parts (Noun Code - 2940)

Swedish Institute for Standards

• SS 1109:1991 Fittings for piping - Elbow nipples for PN 10 - Externally threaded

US-FCR

• FCR COE HL-92-9 FINAL REPORT-1992 DEPTH-AVERAGED NUMERICAL MODELING FOR CURVED CHANNELS

AREMA - American Railway Engineering and Maintenance-of-Way Association

• 920-1951 Turnout and Crossover Data for Curved Split Switches ((See AREMA PORTFOLIO OF TRACKWORK PLANS))

American Society for Testing and Materials (ASTM)

• ASTM G10-83(2002) Standard Test Method for Specific Bendability of Pipeline Coatings
• ASTM G10-10(2024) Standard Test Method for Specific Bendability of Pipeline Coatings
• ASTM G10-10 Standard Test Method for Specific Bendability of Pipeline Coatings
• ASTM G10-10(2019) Standard Test Method for Specific Bendability of Pipeline Coatings
• ASTM G10-83(1996)e1 Standard Test Method for Specific Bendability of Pipeline Coatings

American Petroleum Institute (API)

• ANSI/API Spec 5LIB:2009 Specification for Induction Bends

British Standards Institution (BSI)

• BS EN 1680:2025 Plastics piping systems. Valves for polyethylene (PE) piping systems. Test method for leaktightness under and after bending applied to the operating mechanisms
• BS EN 1680:1997 Plastics piping systems. Valves for polyethylene (PE) piping systems. Test method for leaktightness under and after bending applied to the operating mechanism
• BS AU 189:1983 Method of test for steady state cornering behaviour for road vehicles
• 23/30478865 DC BS EN 1680 Plastics piping systems. Valves for polyethylene (PE) piping systems. Test method for leaktightness under and after bending applied to the operating mechanisms
• BS 5911-110:1992 Precast concrete pipes, fittings and ancillary products-Specification for ogee pipes and fittings (including perforated)

American Society of Mechanical Engineers (ASME)

• ASME A112.4.14-2004 Manually Operated, Quarter-Turn Shutoff Valves for Use in Plumbing Systems

PL-PKN

• PN H93461-15-1987 Cold-bent steel open sections for determined purposes Rood railing sections, type B
• PN H93464-14-1987 Cold-bent steel open sections for determined purposes Channel section

Association Francaise de Normalisation

• NF EN 1680:1997 Plastic pipeline systems - Valves for polyethylene (PE) pipeline systems - Leak test method under and after bending applied to the drive mechanism
• NF P36-403:1989 Évacuation des eaux pluviales - Tuyaux, coudes et cuvettes métalliques - Spécifications.
• NF T47-203:1993 Rubber or plastics hoses and tubing. Bending tests.
• NF T54-920*NF EN 1680:1997 Plastics piping systems. Valves for polyethylene (PE) piping systems. Test method for leaktightness under and after bending applied to the operating mechanism.

Danish Standards Foundation

• DANSK DS/EN 1680:1997 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism
• DS/EN 1680:1998 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism

SE-SIS

• SIS 38 01 15-1957 Mining and industrial tracks. Inspection rail, curved rail 98.4/24.8
• SIS SS 1109-1991 Fittings for piping — Elbow nipples for PN 10 — Externally threaded

BR-ABNT

• ABNT NBR 16165-2013 Onshore pipeline - induction heating bend process pipeline
• ABNT NBR 16165-2017 Induction bends for process piping - Requirements

Lithuanian Standards Office

• LST EN 1680-2002 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms

Spanish Association for Standardization (UNE)

• AENOR UNE-EN 1680:1997 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms
• UNE-EN 1680:1997 PLASTICS PIPING SYSTEMS. VALVES FOR POLYETHYLENE (PE) PIPING SYSTEMS. TEST METHOD FOR LEAKTIGHTNESS UNDER AND AFTER BENDING APPLIED TO THE OPERATING MECHANISM.

American Water Works Association (AWWA)

• AWWA JAW10545 Journal AWWA — Axial and Bending Behavior of Pipeline Joints

American National Standards Institute （ANSI)

• ANSI B11.15-2001 Machine Tools - Safety Requirements for Pipe, Tube, and Shape Bending Machines

Association of German Mechanical Engineers

• DVS 2203-1 Beiblatt 3-2001 Testing procedures for welded joints on panels and pipes made of thermoplastic materials Requirements for bend testing; bend angle/bend path
• DVS 2203-1 Beiblatt 3-2012 Testing of welded joints between panels and pipes made of thermoplastics - Requirements in the technological bending test - Bending angle/bending path

Others: bend,bend bend