Carrying capacity

Carrying capacity, Total:273 items.

The international standard classification for "Carrying capacity" includes: Data communication networks , Switching and signalling systems , Plastics in general , Plastics , Other rubber and plastics products , Plain bearings , Rolling bearings , Timber structures , Clothes , Other standards related to road engineering .

The Chinese standard classification for "Carrying capacity" includes: Data communication equipment , Communication network number, signal and connection , Basic standards and general methods for synthetic resin and plastic , Dedicated processing equipment , Other rubber products , Sliding bearing , Rolling bearing , Timber engineering , Technical Management , Operating equipment, instrument and meter .

Professional Standard - Post and Telecommunication

YD/T 1920-2009 The Architecture of IPTV Bearing Network
YD/T 1309-2004 Bearer independent call bearer control specification
YD/T 4455-2023 Overall technical requirements for IP bearer networks based on SRv6
YD/T 2146-2010 Technical framework for carrier network-aware P2P traffic optimization
YD/T 4610-2023 Fine granularity slicing technical specification forSlicing Packet Network(SPN)

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 14484-1993 Test methods for bearing strength of plastics
GB/T 4662-2012/ISO 76:2006 Rated static load of rolling bearing
GB/T 4662-2003 Rolling bearings - Static load ratings
GB/T 21897-2008 Load-bearing waterproof sheet
GB/T 4662-2012 Rolling bearings - Static load ratings
GB/T 13840-1992 Wafer carriers
GB 9198-1988 Carrier--Determination of particle size by dry sieving method
GB/T 43324-2023 Foil bearings—Performance of hydrodynamic gas thrust bearings—Testing of static load capacity, bearing torque , friction coefficient and lifetime
GB/Z 3480.22-2024 Calculation of load capacity of spur and helical gears—Part 22: Calculation of micropitting load capacity
GB/T 14484-2008 Plastics - Determination of bearing strength
GB/T 4662-2012/ISO 76-2006 Rated static load of rolling bearing

Professional Standard - Railway

TB/T 2884.2-1998 D-type bearing saddle measuring tool saddle width sample
TB/T 2884.5-1998 D-type bearing saddle measuring tool symmetrical measuring tool
TB/T 2603-1996 D-type bearing saddle maintenance measuring tool
TB/T 3267-2011 Adapter or Railway Freight Car

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40116-2021 Foil bearings - Performance of hydrodynamic gas journal bearings - Testing of static load capacity, friction coefficient and lifetime
GB/T 39271.2-2020 Rolling bearings—Load ratings for hybrid bearings with rolling elements made of ceramic—Part 2:Static load ratings
GB/T 39271.1-2020 Rolling bearings—Load ratings for hybrid bearings with rolling elements made of ceramic—Part 1: Dynamic load ratings
GB/T 39422-2020 Determination methods of characteristic values for dowel-bearing strength and withdrawal capacity of nails and screws in timber structure
GB/T 41425-2022 Test method for overall impact resistance of baby walking harness

Professional Standard - Electron

SJ 3118-1988 Wafer holder

Professional Standard - Automobile

QC/T 997-2015 Structural requirements of integral body for buses

Group Standards of the People's Republic of China

T/CASME 1396-2024 Carrying furring for suspended ceiling
T/ZZB 1098-2019 High load plastic plain bearing

Professional Standard - Traffic

JT/T 835-2012 California Bearing Ratio Instrument

国家机械工业局

JB/T 8264.1-1999 Test method for bulk density of carrier

未注明发布机构

NR TEF 3279 ISSUE 2-2023 Longitudinal Bearer Management Plan

Taiwan Provincial Standard of the People's Republic of China

CNS 13594-1995 Methods of Test for Loss of Thickness by Loading of Textile Floor Coverings

Military Standard of the People's Republic of China-General Armament Department

GJB 2757-1996 Carrier-based aircraft strength and stiffness specifications airframe retention

Professional Standard - Machinery

JB/T 8567-2010 Spherical plain bearings-Static load ratings
JB/T 8567-1997 Rated static load of oscillating bearings

Professional Standard - Commodity Inspection

SN/T 2438.1-2010 Rules for the inspection toys for import and export—Part 1:Toys intended to bear the mass of a child

Standard Association of Australia （SAA）

AS 1717:1975 Unitized microfilm carriers
AS 1717:1975(R2016) Unitized microfilm carriers
AS 4171:1994 Rolling bearings - Static load ratings

Association Francaise de Normalisation

NF L31-211:1965 Airframe bearings. Rigid ball bearings for light loads.
NF L31-211:1966 AIRFRAME BEARINGS. RIGID BALL BEARINGS FOR LIGHT LOADS. (RECH.). DIMENSIONS AND LOADS.
NF L31-212:1965 Airframe bearings. Rigid ball bearings for average loads. (rech.). Dimensions and loads.
NF E48-674:1988 Hydraulic fluid power. Filter elements. Method for end load test.
NF E48-674*NF ISO 3723:2015 Hydraulic fluid power - Filter elements - Method for end load test
NF ISO 76:2006 Bearings - Basic static loads
XP R18-904-4:2008 Road vehicles - Rear load carrier devices - Part 4 : rear bicycles carriers
NF P23-304:1984 Wooden interior landing doors. Specifications.
NF E23-030-6:2006 Calculation of load capacity of spur and helical gears - Part 6 : calculation of service life under variable load.
NF D69-309*NF EN 15939:2019 Hardware for furniture - Strength and loading capacity of wall attachment devices
NF E22-391:1991 ROLLING BEARINGS. STATIC LOAD RATINGS.
XP ISO/PAS 11154:2007 Road vehicles - Roof load carriers
CWA 15846:2008 Measuring method for Dynamic Compactness & Bearing Capacity with SP-LFWD (Small - plate Light Falling Weight Deflectometer)

British Standards Institution (BSI)

BS PD ISO/TS 10300-20:2021 Calculation of load capacity of bevel gears. Calculation of scuffing load capacity. Flash temperature method
BS EN 3058:1994 Bearings, airframe rolling - Rigid double row ball bearings in corrosion resisting steel - Dimensions and loads
BS EN 846-4:2002(2005) Methods of test for ancillary components for masonry — Part 4 : Determination of load capacity and load - deflection characteristics of straps
BS EN 3053:1994 Bearings, airframe rolling - Single row self-aligning roller bearings in steel - Dimensions and loads
BS EN 3057:1994 Bearings, airframe rolling - Rigid double row ball bearings in steel, cadmium plated - Dimensions and loads
BS ISO 4384-2:2011 Plain bearings. Hardness testing of bearing metals. Solid materials
BS EN 3054:1994 Bearings, airframe rolling - Single row self-aligning roller bearings in steel, cadmium plated - Dimensions and loads
BS ISO 10300-3:2014 Calculation of load capacity of bevel gears. Calculation of tooth root strength
BS ISO 10300-3:2023 Calculation of load capacity of bevel gears - Calculation of tooth root strength
BS ISO 4384-2:2022 Plain bearings. Hardness testing of bearing metals. Solid materials
PD ISO/TS 10300-20:2021 Calculation of load capacity of bevel gears. Calculation of scuffing load capacity. Flash temperature method
BS PD ISO/TS 6336-22:2018 Calculation of load capacity of spur and helical gears. Calculation of micropitting load capacity
BS ISO 76:2006+A1:2017 Rolling bearings. Static load ratings
BS PD ISO/TR 6336-31:2018 Calculation of load capacity of spur and helical gears. Calculation examples of micropitting load capacity
BS EN 2585:2019 Aerospace series. Bearing, spherical plain in corrosion resisting steel with self-lubricating liner. Wide series. Elevated load at ambient temperature. Dimensions and loads

American National Standards Institute （ANSI)

ANSI/ASTM D953:1992 Test Method for Bearing Strength of Plastics (08.01)
ANSI/ATIS 1000676-2001 BICC IP Bearer Control Protocol (IPBCP)
ANSI/ATIS 1000677-2001 BICC Bearer Control Tunneling Protocol
ANSI/ATIS 1000672-2000 Bearer Independent Call Control (BICC)

SCC

ISO/IEC 23001-10:2015/FDAmd 1 Information technology — MPEG systems technologies — Part 10: Carriage of timed metadata metrics of media in ISO base media file format — Amendment 1: Carriage of spatial information
MIL MIL-L-46150-1971 LUBRICANT, WEAPONS, SEMI-FLUID (HIGH LOAD-CARRYING CAPACITY)
NS-EN 846-10:2000 Methods of test for ancillary components for masonry — Part 10: Determination of load capacity and load deflection characteristics of brackets
DANSK DS/ISO/TS 10300-20:2021 Calculation of load capacity of bevel gears – Part 20: Calculation of scuffing load capacity – Flash temperature method
NS-EN 846-4:2001 Methods of test for ancillary components for masonry — Part 4: Determination of load capacity and load-deflection characteristics of straps
BS ISO 10300-3:2001 Calculation of load capacity of bevel gears-Calculation of tooth root strength
BS PD ISO/TS 6336-21:2022 Calculation of load capacity of spur and helical gears-Part 21: Calculation of scuffing load capacity — Integral temperature method
NS-EN 16337:2013 Hardware for furniture — Strength and loading capacity of shelf supports
DANSK DS/EN 16337:2013 Hardware for furniture - Strength and loading capacity of shelf supports
VDI 2341-2007 Belt conveyors for bulk materials — support rollers and support roller spacing
DIN EN 16337 E:2011 Draft Document - Hardware for Furniture - Strength and loading capacity of shelf supports; German version prEN 16337:2011
BS ISO 10300-2:2001 Calculation of load capacity of bevel gears-Calculation of surface durability (pitting)
DIN EN 15939 E:2015 Draft Document - Hardware for furniture - Strength and loading capacity of wall attachment; German and English version prEN 15939:2015
NS-EN 15939:2011+A1:2014 Hardware for furniture — Strength and loading capacity of wall attachment devices
DIN ISO 76 Supplement 2 E:2011 Draft Document - Rolling bearings - Static load ratings - Supplement 2: Load ratings for hybrid bearings
11/30251691 DC BS EN 16337. Hardware for furniture. Strength and loading capacity of shelf supports
ASD-STAN PREN 2585:2017 Aerospace Series Bearings, Spherical Plain in Corrosion Resisting Steel with Self-Lubricating Liner, Wide Series Elevated Loads at Ambient Temperature Dimensions and Loads
BS PD ISO/TS 6336-20:2022 Calculation of load capacity of spur and helical gears-Calculation of scuffing load capacity. Flash temperature method
BS PD ISO/TS 6336-4:2019 Calculation of load capacity of spur and helical gears-Calculation of tooth flank fracture load capacity
DANSK DS/ISO 10300-3:2014 Calculation of load capacity of bevel gears – Part 3: Calculation of tooth root strength
DIN 3991-3 E:2023 Draft Document - Calculation of load capacity of bevel gears - Part 3: Calculation of tooth root strength

U.S. Military Regulations and Norms

ARMY QPL-46150-2013 Lubricant, Weapons, Semi-Fluid (High Load-Carrying Capacity)
ARMY QPL-46150-19 NOTICE 1-2008 Lubricant, Weapons, Semi-Fluid (High Load-Carrying Capacity)
ARMY MIL-L-46150 (1)-1986 LUBRICANT, WEAPONS, SEMI-FLUID (HIGH LOAD-CARRYING CAPACITY)
ARMY MIL-L-46150-1971 LUBRICANT, WEAPONS, SEMI-FLUID (HIGH LOAD-CARRYING CAPACITY)
ARMY QPL-46150-2012 LUBRICANT, WEAPONS, SEMI-FLUID (HIGH LOAD-CARRYING CAPACITY)

German Institute for Standardization

DIN 20400:1951 Knuckle threads for the mining; threads with large load-bearing depth
DIN 20400:1990 Knuckle threads for the mining; threads with large load-bearing depth
DIN ISO 20056-2 E:2018-11 Rolling bearings - Load ratings for hybrid bearings with rolling elements made of ceramic - Part 2: Static load ratings
DIN EN 846-10:2000-08 Methods of test for ancillary components for masonry - Part 10: Determination of load capacity and load deflection characteristics of brackets; German version EN 846-10:2000
DIN EN 846-4:2005-01 Methods of test for ancillary components for masonry - Part 4: Determination of load capacity and load-deflection characteristics of straps; German version EN 846-4:2001 + A1:2004
DIN ISO 20056-1 E:2018-11 Rolling bearings - Load ratings for hybrid bearings with rolling elements made of ceramic - Part 1: Dynamic load ratings
DIN 7805-6:1988 Tyres for commercial vehicles and their trailers; relationship between load-carrying capacity and speed
DIN ISO 20056-2:2019 Rolling bearings - Load ratings for hybrid bearings with rolling elements made of ceramic - Part 2: Static load ratings (ISO 20056-2:2017)
DIN 3990-3:1987 Calculation of load capacity of cylindrical gears; calculation of tooth strength
DIN 3990-3:1987-12 Calculation of load capacity of cylindrical gears; calculation of tooth strength
DIN ISO 20056-1:2019 Rolling bearings - Load ratings for hybrid bearings with rolling elements made of ceramic - Part 1: Dynamic load ratings (ISO 20056-1:2017)
DIN EN 16337:2013-08 Hardware for furniture - Strength and loading capacity of shelf supports; German version EN 16337:2013
DIN ISO 4384-2:1982 Plain bearings; hardness testing of bearing metals; solid materials
DIN 3990-4:1987 Calculation of load capacity of cylindrical gears; calculation of scuffing load capacity
DIN 3990-4:1987-12 Calculation of load capacity of cylindrical gears; calculation of scuffing load capacity
DIN 4019-2:1961 Subsoil; Settlement Calculations in the Case of Inclined and Eccentrically Acting Loading
DIN 4019-2:1981 Subsoil; Settlement Calculations in the Case of Inclined and Eccentrically Acting Loading
DIN ISO 4384-2:2014-07 Plain bearings - Hardness testing of bearing metals - Part 2: Solid materials (ISO 4384-2:2011)
DIN EN 15939:2019 Hardware for furniture - Strength and loading capacity of wall attachment devices
DIN EN 3056:1994 Aerospace series; bearings, airframe rolling, rigid double row ball bearings in steel; dimensions and loads; German version EN 3056:1994
DIN 19702:2013 Solid structures in hydraulic engineering.Bearing capacity, serviceability and durability
DIN ISO 4384-2:2014 Plain bearings - Hardness testing of bearing metals - Part 2: Solid materials (ISO 4384-2:2011)
DIN ISO 4384-2 E:2013-05 Plain bearings - Hardness testing of bearing metals - Part 2: Solid materials
DIN 19702:2010 Solid structures in hydraulic engineering - Bearing capacity, serviceability and durability
DIN 1926-1:1973 Platform scales; capacity, platform sizes
DIN 15002:1980 Lifting appliances; Load carrying devices; Vocabulary
DIN ISO 76:1988-10 Rolling bearings - Static load ratings
DIN EN 3057:1994 Aerospace series; bearings, airframe rolling, rigid double row ball bearings in steel, cadmium plated; dimensions and loads; German version EN 3057:1994
DIN ISO 76:2019-04 Rolling bearings - Static load ratings (ISO 76:2006 + Amd.1:2017)
DIN 6310:2002 Spring-loaded catch for jigs
DIN 19702 Solid structures in hydraulic engineering - Bearing capacity, serviceability and durability
DIN 19702:1966 Solid structures in hydraulic engineering - Bearing capacity, serviceability and durability
DIN 19702 E:2009-02 Solid structures in hydraulic engineering - Bearing capacity, serviceability and durability
DIN 3991-3:2023-08 Calculation of load capacity of bevel gears - Part 3: Calculation of tooth root strength / Note: Date of issue 2023-07-14*Intended as replacement for DIN 3991-3 (1988-09).
DIN EN 3058:1994 Aerospace series; bearings, airframe rolling; rigid double row ball bearings in corrosion resisting steel; dimensions and loads; German version EN 3058:1994
DIN ISO 76 Bb.2:2011 Rolling bearings - Static load ratings - Supplement 2: Load ratings for hybrid bearings
DIN EN 2584:2019-05 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads; German and English version EN 2584:2019
DIN 19702:2013-02 Solid structures in hydraulic engineering - Bearing capacity, serviceability and durability
DIN EN 2585:2019-05 Aerospace series - Bearing, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads; German and English version EN 2585:2019

International Organization for Standardization (ISO)

ISO/TS 10300-20:2021 Calculation of load capacity of bevel gears — Part 20: Calculation of scuffing load capacity — Flash temperature method
ISO/TS 6336-20:2022 Calculation of load capacity of spur and helical gears — Part 20: Calculation of scuffing load capacity — Flash temperature method
ISO/TS 6336-21:2022 Calculation of load capacity of spur and helical gears — Part 21: Calculation of scuffing load capacity — Integral temperature method
ISO/TR 5047:1982 Continuous mechanical handling equipment; Chain conveyors with bearing devices or load carriers; Examples of protection against injuries by load carriers
ISO 10300-3:2023 Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength
ISO/FDIS 10300-3 Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength
ISO 10300-3:2011 Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength
ISO 14946:2001 Small craft - Maximum load capacity
ISO 14946:2021 Small craft - Maximum load capacity
ISO 4384-2:2011 Plain bearings - Hardness testing of bearing metals - Part 2: Solid materials
ISO 4384-2:2022 Plain bearings — Hardness testing of bearing metals — Part 2: Solid materials
ISO 11154:2023 Road vehicles — Roof load carriers
ISO 76:1987 Rolling bearings; Static load ratings
ISO 10300-3:2014 Calculation of load capacity of bevel gears - Part 3: Calculation of tooth root strength

Lithuanian Standards Office

LST EN 846-10-2000 Methods of test for ancillary components for masonry - Part 10: Determination of load capacity and load deflection characteristics of brackets
LST EN 15939-2012 Hardware for furniture - Strength and loading capacity of wall attachment devices

Danish Standards Foundation

DS/EN 846-10:2002 Methods of test for ancillary components for masonry - Part 10: Determination of load capacity and load deflection characteristics of brackets
DS/EN 16337:2013 Hardware for furniture - Strength and loading capacity of shelf supports
DS/EN 15939:2012 Hardware for furniture - Strength and loading capacity of wall attachment devices
DS/ISO/TS 10300-20:2021 Calculation of load capacity of bevel gears – Part 20: Calculation of scuffing load capacity – Flash temperature method

GSO

GSO ISO/TS 10300-20:2023 Calculation of load capacity of bevel gears — Part 20: Calculation of scuffing load capacity — Flash temperature method
BH GSO ISO 10300-3:2022 Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength
GSO ISO 10300-3:2021 Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength
GSO ISO 14242-3:2015 Implants for surgery -- Wear of total hip-joint prostheses -- Part 3: Loading and displacement parameters for orbital bearing type wear testing machines and corresponding environmental conditions for test
BH GSO ISO/TS 10300-20:2023 Calculation of load capacity of bevel gears — Part 20: Calculation of scuffing load capacity — Flash temperature method
BH GSO ISO 4384-2:2016 Plain bearings -- Hardness testing of bearing metals -- Part 2: Solid materials
BH GSO ISO 76:2016 Rolling bearings -- Static load ratings
GSO ISO 76:2015 Rolling bearings -- Static load ratings
OS GSO ISO 4384-2:2015 Plain bearings -- Hardness testing of bearing metals -- Part 2: Solid materials
GSO ISO 14243-3:2015 Implants for surgery -- Wear of total knee-joint prostheses -- Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications

CEPT T/GSI 02-02 E-1987 Bearer Services

International Telecommunication Union (ITU)

ITU-T Q.1950 AMD 1-2006 Bearer independent call bearer control protocol Amendment 1: New Annex G Call bearer control International Emergency Preference Scheme Study Group 11
ITU-T Q.1950 SPANISH-2002 Bearer independent call bearer control protocol
ITU-T Q.1950 FRENCH-2002 Bearer independent call bearer control protocol
ITU-T SERIE Q SUPP 19 SPANISH-1999 Technical Report TRQ.2300: Bearer control Signalling requirements - Root-party bearer control
ITU-T SERIE Q SUPP 20 SPANISH-1999 Technical Report TRQ.2310: Bearer control signalling requirements – Leaf-party bearer control
ITU-T Q SUPP 19-1999 Technical Report TRQ.2300: Bearer control signalling requirements - Root-party bearer control
ITU-T Q SUPP 20-1999 Technical Report TRQ.2310: Bearer control signalling requirements - Leaf-party bearer control
ITU-T SERIE Q SUPP 19 FRENCH-1999 Technical Report TRQ.2300: Bearer control Signalling requirements - Root-party bearer control
ITU-T SERIE Q SUPP 20 FRENCH-1999 Technical Report TRQ.2310: Bearer control signalling requirements – Leaf-party bearer control
ITU-T SERIE Q SUPP 21 SPANISH-1999 Technical Report TRQ.2320: Bearer Control Signalling Requirements - Third-party Bearer Control
ITU-T Q SUPP 21-1999 Technical Report TRQ.2320: Bearer control signalling requirements - Third-party bearer control
ITU-T SERIE Q SUPP 21 FRENCH-1999 Technical Report TRQ.2320: Bearer Control Signalling Requirements - Third-party Bearer Control
ITU-T I.233.1*ITU-T I.233.2-1991 Frame mode bearer services
ITU-T SERIES Q SUPP 12-1999 Technical Report TRQ.2100: Coordinated Call Control and Bearer Control Signalling Requirements - Root-Party Coordinated Call and Bearer Control Study Group 11
ITU-T Q.1950 AMD 1 FRENCH-2006 Bearer independent call bearer control protocol Amendment 1: New Annex G – Call bearer control – International Emergency Preference Scheme
ITU-T Q.1970-2006 BICC IP bearer control protocol Study Group 11
ITU-T Q.1950 AMD 1 SPANISH-2006 Bearer independent call bearer control protocol Amendment 1: New Annex G – Call bearer control – International Emergency Preference Scheme
ITU-T Q.1990-2001 BICC Bearer Control Tunnelling Protocol Series Q: Switching and Signalling Specifications of Signalling Related to Bearer Independent Call Control (BICC) Study Group 11
ITU-T I.230 SPANISH-1988 Definition of Bearer Service Categories
ITU-T I.230 FRENCH-1988 Definition of Bearer Service Categories
ITU-T I.231.2 FRENCH-1988 CIRCUIT-MODE BEARER SERVICE CATEGORIES CIRCUIT-MODE 64 kbit/s 8 kHz STRUCTURED BEARER SERVICE USABLE FOR SPEECH INFORMATION TRANSFER
ITU-T I.231.9-1993 CIRCUIT MODE 64 Kbit/s 8 kHz STRUCTURED MULTI-USE BEARER SERVICE CATEGORY
ITU-T I.231.2 SPANISH-1988 CIRCUIT-MODE BEARER SERVICE CATEGORIES CIRCUIT-MODE 64 kbit/s 8 kHz STRUCTURED BEARER SERVICE USABLE FOR SPEECH INFORMATION TRANSFER
ITU-T Y.1391 SPANISH-2006 Architecture of service management in multi bearer, multicarrier environment
ITU-T Y.1391 FRENCH-2006 Architecture of service management in multi bearer, multicarrier environment
ITU-T G.8601/Y.1391-2006 Architecture of service management in multi-bearer, multi-carrier environment

AT-ON

ONORM M 6320 Beib.1-1989 Load carrying capacity of rolling bearings; static load ratings; calculation method of static load carrying capacity
ONORM M 6745-3-1994 Calculation of load capacity of bevel gears without offset - Tooth strength
ONORM M 6745-4-1994 Calculation of load capacity of bevel gears without offset - Scuffing load capacity
ONORM M 6320 Teil.1-1982 Load carrying capacity of rolling bearings; calculation methods
ONORM M 6320 Teil.2-1984 Load carrying capacity of rolling bearings; minimum load ratings
ONORM B 4100 Teil.2-1981 Wooden Structures; load bearing — timber structures

Korean Agency for Technology and Standards (KATS)

KS M 3708-2014 Testing method for bearing strength of carbon fiber reinforced plastics
KS W ISO 1002-2004(2019) Rolling bearings－Airframe bearings－Characteristics, boundary dimensions, tolerances, static load ratings
KS G 3211-2014 Plastic carrying vessels
KS F 2156-2017 Method of dowel-bearing strength test for wood and wood-based products
KS F 2156-2022 Method of dowel-bearing strength test for wood and wood-based products
KS B ISO 10300-3-2009(2019) Calculation of load capacity of bevel gears－Part 3：Calculation of tooth root strength
KS B ISO 10300-3-2019 Calculation of load capacity of bevel gears－Part 3：Calculation of tooth root strength
KS B ISO 10766-2003(2008) Hydraulic fluid power－Cylinders－Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
KS B 2020-2023 Rolling bearings — Static load ratings

SE-SIS

SIS SS 421 10 06-1983 Bare conductors of aluminium — Current carrying capacity in continuous duty
SIS SS 421 10 07-1983 Bare conductors of copper — Current carrying capacity in continuous duty
SIS SS 81 51 13-1989 Ceilings — Load bearing structure — Classification

IX-SA

AS 508:1972 pavement bearing capacity

HU-MSZT

MNOSZ 5289-1953 Carrying capacity of flat collection truck (with carrying capacity of 25 Q)
MSZ 7347-1960 Main information and operating speed of electric hoisting machinery that can carry two people

US-FCR

FCR COE EM 1110-1-1905-1992 BEARING CAPACITY OF SOILS

ITU-T - International Telecommunication Union/ITU Telcommunication Sector

ITU-T Q.1950-2002 Bearer independent call bearer control protocol (Study Group 11)
SERIE Q SUPP 21 FRENCH-1999 Technical Report TRQ.2320: Bearer Control Signalling Requirements - Third-party Bearer Control

VDI - Verein Deutscher Ingenieure

VDI 3571-1977 Manufacturing tolerances of bridge cranes carrying-wheel; bearing of carryingwheel and trolley-track
VDI 2341-2005 Belt conveyors for bulk material - Idler rolls and idler roll distances

YU-JUS

JUS M.C3.325-1988 Plain bearings. Hardness testing of bearing metals. Solid materials

KR-KS

KS B 2059-2019(2024) Plain bearings — Hydrodynamic oilless plain bearing — Foil journal bearing — Testing of load capacity, friction coefficient and lifetime
KS B 2060-2019(2024) Plain bearings — Hydrodynamic oilless plain bearing — Foil thrust bearing — Testing of load capacity, bearing torque, friction coefficient and lifetime
KS B ISO 4384-2-2023 Plain bearings — Hardness testing of bearing metals — Part 2: Solid materials
KS B ISO 76-2023 Rolling bearings — Static load ratings

Defense Logistics Agency

DLA MIL-L-40064 E NOTICE 1-1999 LOADING PLATES, STEEL, AND ALUMINUM
DLA MIL-L-40064 E-1986 LOADING PLATES, STEEL, AND ALUMINUM
DLA MS35689 REV A VALID NOTICE 1-2003 V-BEARING (SPRING LOADED)
DLA MS35689 REV A-1993 V-BEARING (SPRING LOADED)
DLA MS35689 REV A VALID NOTICE 3-2012 V-Bearing (Spring Loaded)
DLA MS35688 REV A-1993 V - BEARING (SPRING, LOADED THROW OUT TYPE)

RU-GOST R

GOST 31846-2012 Special rolling stock. Requirements for bearing structure strength and for dynamic properties
GOST R 53337-2009 Special rolling stock. Requirements for bearing structure stength and for dynamic properties
GOST R 52857.5-2007 Vessels and apparatus. Norms and methods of strength calculation. Calculation of shells and heads from influence of support loads
GOST 18855-1982 Rolling bearings. Methods of calculation of dynamic load ratings and rating life
GOST 18855-1994 Rolling bearings. Dinamic load ratings and rating life

CEN - European Committee for Standardization

PREN 15939-2015 Hardware for furniture - Strength and loading capacity of wall attachment

Spanish Association for Standardization (UNE)

UNE-EN 16337:2013 Hardware for furniture - Strength and loading capacity of shelf supports
UNE-EN 15939:2012+A1:2014 Hardware for furniture - Strength and loading capacity of wall attachment devices
UNE-EN 2585:2019 Aerospace series - Bearing, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads (Endorsed by Asociación Española de Normalización in April of 2019.)
UNE-EN 2584:2019 Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads (Endorsed by Asociación Española de Normalización in April of 2019.)

GM Europe

GME QE 061002-1995 An Tr鋑erblech vulkanisierte Elastomere f黵 Dichtungen im Motorbereich bis +175癈 Elastomers Vulcanized to Carrier Sheet for Gaskets in Engine Compartment to +175 Degrees C English/German
GME QE 061001-1995 An Tr鋑erblech vulkanisierte Elastomere f黵 Dichtungen im Motorbereich bis +150癈 Elastomers Vulcanized to Carrier Sheet for Gaskets in Engine Compartment to +150 Degrees C English/German

American Society for Testing and Materials (ASTM)

ASTM RR-D01-1017 1978 D1210-Test for Fineness of Dispersion of Pigment-Vehicle Systems
ASTM D6393-14 Standard Test Method for Bulk Solids Characterization by Carr Indices
ASTM D6393-08 Standard Test Method for Bulk Solids Characterization by Carr Indices
ASTM D5764-24 Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products

DIN

DIN 743-3:2024 Calculation of load capacity of shafts and axles - Part 3: Strength of materials
DIN 3991-3:2024 Calculation of load capacity of bevel gears - Part 3: Calculation of tooth root strength

AASHTO - American Association of State Highway and Transportation Officials

DIVISION I 14.7-1996 Load Plates and Anchorage for Bearings (Interim 1997; Interim 1998)

ATIS - Alliance for Telecommunications Industry Solutions

T1.TR.76-2001 Operation of the Bearer Independent Call Control Protocol with IP Bearer Control Protocol
1000672-2000 Bearer Independent Call Control (BICC)
T1.676-2001 BICC IP Bearer Control Protocol (IPBCP)
T1.672-2000 Bearer Independent Call Control (BICC)
1000677-2001 BICC Bearer Control Tunneling Protocol
T1.677-2001 BICC Bearer Control Tunneling Protocol

South African Bureau of Standard

SANS 14946:2008 Small craft - Maximum load capacity
SANS 4384-2:2005 Plain bearings - Hardness testing of bearing metals Part 2: Solid materials

Japanese Industrial Standards Committee (JISC)

JIS F 1041:2004 Small craft -- Maximum load capacity
JIS B 1519:2023 Rolling bearings -- Static load ratings

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 4040-1996 Aerospace Series Bearings@ Spherical Plain in Corrosion Resisting Steel with Self-Lubricating Liner with Wide Inner Ring Elevated Loads at Ambient Temperature Dimensions and Loads (Edition P 1)

United States Navy

NAVY MS21944 REV C-1987 BODY, CLUSTER FITTING, TWO WAY, 180 DEG, FLARELESS

European Committee for Standardization (CEN)

DD ENV 1991-3-1995 Eurocode 1: Basis of Design and Actions on Structures - Part 3: Traffic Loads on Bridges Superseded by EN 1991-2:2003 [Superseded By: CEN EN 1991-2]