About Establishment Analysis

About Establishment Analysis, Total:149 items.

The international standard classification for "About Establishment Analysis" includes: Sensory analysis , Coals , Abrasives , Fuels .

The Chinese standard classification for "About Establishment Analysis" includes: Basic standards and general methods , Coal analysis methods , Grinding material and apparatus .

Taiwan Provincial Standard of the People's Republic of China

CNS 14943-2005 Essential oils ? General guidance on chromatographic profiles ? Part 1: Preparation of chromatographic profiles for presentation in standards

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1574-2007 Test method for analysis of coal ash
GB/T 16861-1997 Sensory analysis - Identification and selection of descriptors for establishing a sensory profile by a multidimensional approach
GB/T 13868-1992 Sensory analysis－General guidance for the design of test rooms
GB/T 1574-1995 Analysis of coal ash
GB/T 13868-2009 analysis - General guidance for the design of test rooms

Professional Standard - Machinery

JB/T 7994-1999 Chemical analysis methods of cubic boron nitride

未注明发布机构

SAE ARP5758A-2017 Trend Analysis for Maintaining Correlation of Gas Turbine Engine Test Cells

工业和信息化部/国家能源局

JB/T 13196-2017 Vertical shafts crushing and screening complete set of equipment

Professional Standard - Agriculture

ISPM No.10(1999) Requirements for Establishing Pest-Free Origins and Pest-Free Production Sites (Chinese)
ISPM No.22(2005) Requirements for Establishing Areas with Low Pest Occurrence Rates (Chinese)
空气和废气监测分析方法 7.5.1-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter
空气和废气监测分析方法 7.5.2-2003 Part Seven Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter

Professional Standard - Electricity

DL/T 1037-2016 Standard test method for major and minor elements in coal ash
DL/T 1037-2007 Stand test method for major and minor elements in coal ash

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 4637-2003 A Parametric Analysis of a Grid-Independent BCHP System - Focusing on Impact of Technological Advancements
ASHRAE QC-06-059-2006 Performance Analysis of Standing Column Well Ground Geat Exchanger Systems
ASHRAE LV-11-C001-2011 New Analytical and Numerical Solutions for the Short-term Analysis of Vertical Ground Heat Exchangers

SCC

AWWA WQTC60633 Establishing Correlations Between Membrane Fouling and Water Composition
NEMA BS 31035-2023 Position Paper on Carbon Monoxide
NEMA EL 80001-2023 NEMA Position Paper on Electronic Labeling
AWWA ACE90099 American Water Works Association Update on Employee Relations Legislation
VDI 4405 BLATT 1-2003 Process-oriented cost analysis in internal logistics
DANSK DS/EN 726-4:1995 Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 4: Application independent card related terminal requirements
NS-EN 726-4:1994 Identification card systems — Telecommunications integrated circuit(s) cards and terminals — Part 4: Application independent card related terminal requirements
BS PD ISO/TR 22281:2018 Welding consumables. International Institute of Welding (IIW) position statement on the use of trace element analyses in welding consumable specifications
DANSK DS/CEN/TR 15508:2007 Key properties on solid recovered fuels to be used for establishing a classification system
SN-CEN/TR 15508:2006 Key properties on solid recovered fuels to be used for establishing a classification system
AWWA SOURCES59264 Critical Components of Conservation Programs That Get Results: A National Analysis
BS 5259:1976 Recommendations for the order of reporting elements in the analysis of steel
NEMA BS 31049-2024 NEMA Position Paper on 10-Year Battery Mandates
VDI 4405 BLATT 2-2003 Process-oriented cost analysis in internal logistics — example
AAMI TIR43:2021 Ultrapure dialysis fluid for hemodialysis and related therapies
AAMI TIR43:2011 Ultrapure dialysate for hemodialysis and related therapies
VDI 4006 BLATT 3-2013 Human reliability — methods for event analysis
BS PD CEN/TR 17421:2019 Animal feeding stuffs: Methods of sampling and analysis. Recommendations for the organization and evaluation of collaborative studies for multi-analyte methods of analysis
CIDA 05-1993 Creating Productive Partnerships: A Win-Win Guide to Enterprise Bargaining
DANSK DS/ISO 16087:2015 Implants for surgery - Roentgen stereophotogrammetric analysis for the assessment of migration of orthopaedic implants
DANSK DS/IEC PAS 63313:2021 Position statement on germicidal UV-C irradiation – UV-C safety guidelines
AWWA DPOC56509 Component Analysis of Apparent Losses
BS PD IEC PAS 63313:2021 Position statement on germicidal UV-C irradiation UV-C safety guidelines
AENOR UNE-EN ISO 11663:2016 Quality of dialysis fluid for haemodialysis and related therapies (ISO 11663:2014)
NS-EN ISO 11663:2015 Quality of dialysis fluid for haemodialysis and related therapies (ISO 11663:2014)

British Standards Institution (BSI)

BS EN 60747-16-4:2004 Discrete semiconductor devices - Microwave integrated circuits - Switches
BS DD ISO/TS 29041:2009 Gas mixtures - Gravimetric preparation - Mastering correlations in composition
PD CEN/TR 17421:2019 Animal feeding stuffs: Methods of sampling and analysis. Recommendations for the organization and evaluation of collaborative studies for multi-analyte methods of analysis
BS EN ISO 16133:2018 Soil quality. Guidance on the establishment and maintenance of monitoring programmes
BS ISO 18431-2:2004 Mechanical vibration and shock. Signal processing - Time domain windows for Fourier Transform analysis
PD IEC PAS 63313:2021 Position statement on germicidal UV-C irradiation UV-C safety guidelines

European Committee for Standardization (CEN)

82/434/EEC on the approximation of the laws of the Member States relating to methods of analysis necessary for checking the composition of cosmetic products
CEN/TR 15508:2006 Key properties on solid recovered fuels to be used for establishing a classification system
EN ISO 8589:2010 Sensory analysis - General guidance for the design of test rooms (Incorporates Amendment A1: 2014)

IET - Institution of Engineering and Technology

HOW TO BLD SUCC BUSS RELAT-2009 How to Build Successful Business Relationships

IX-EU/EC

85/490/EEC-1985 Fourth Commission Directive on the Approximation of the Laws of the Member States Relating to Methods of Analysis Necessary for Checking the Composition of Cosmetic Products
2007/C 306/01-2007 TREATY OF LISBON AMENDING THE TREATY ON EUROPEAN UNION AND THE TREATY ESTABLISHING THE EUROPEAN COMMUNITY
93/1/EEC-1993 Commission Directive Amending Directive 77/535/EEC on the Approximation of the Laws of the Member States Relating to Methods of Sampling and Analysis for Fertilizers (Analysis Methods for Trace Elements)
83/514/EEC-1983 Third Commission Directive on the Approximation of the Laws of the Member States Relating to Methods of Analysis Necessary for Checking the Composition of Cosmetic Products
COM(1999) 614 FINAL-1999 Creation of the Single European Sky
EEC/1969/88-1988 Council Regulation Establishing a Single Facility Providing Medium-Term Financial Assistance for Member States' Balances of Payments
96/335/EC-1996 Commission Decision Establishing an Inventory and a Common Nomenclature of Ingredients Employed in Cosmetic Products
78/436/EEC-1978 Commission Decision Establishing a Scientific Committee for Pesticides
NO 294/2008-2008 REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL establishing the European Institute of Innovation and Technology
2005/681/JHA-2005 COUNCIL DECISION establishing the European Police College (CEPOL) and repealing Decision 2000/820/JHA
73/44/EEC-1973 Council Directive on the Approximation of the Laws of the Member States Relating to the Quantitative Analysis of Ternary Fibre Mixtures
90/207/EEC-1990 Commission Directive Amending the Second Directive 82/434/EEC on the Approximation of the Laws of the Member States Relating to Methods of Analysis Necessary for Checking the Composition of Cosmetic Products
80/1335/EEC-1980 First Commission Directive on the Approximation of the Laws of the Member States Relating to Methods of Analysis Necessary for Checking the Composition of Cosmetic Products
NO 768/2005-2005 COUNCIL REGULATION establishing a Community Fisheries Control Agency and amending Regulation (EEC) No 2847/93 establishing a control system applicable to the common fisheries policy
2008/147/EC-2008 COUNCIL DECISION on the conclusion on behalf of the European Community of the Agreement between the European Community and the Swiss Confederation concerning the criteria and mechanisms for establishing the State responsible for examining a request for as
89/117/EEC-1989 Council Directive on the Obligations of Branches Established in a Member State of Credit Institutions and Financial Institutions Having their Head Offices Outside That Member State Regarding the Publication of Annual Accounting Documents
NO 460/2004-2004 REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL establishing the European Network and Information Security Agency (Text with EEA relevance)
77/535/EEC-1977 Commission Directive on the Approximation of the Laws of the Member States Relating to Methods of Sampling and Analysis for Fertilizers ((Amended by 89/519/EEC and 93/1/EEC))
82/434/EEC-1982 Second Commission Directive on the Approximation of the Laws of the Member States Relating to Methods of Analysis Necessary for Checking the Composition of Cosmetic Products ((Amended by 90/207/EEC))
M 335-2003 STANDARDIZATION MANDATE ASSIGNED TO THE CEN CONCERNING THE MODERNISATION OF THE METHODS OF ANALYSIS OF FERTILIZERS
87/143/EEC-1987 Commission Directive Amending the First Directive 80/1335/EEC on the Approximation of the Laws of the Member States Relating to Methods of Analysis Necessary for Checking the Composition of Cosmetic Products
COM(2003) 258 FINAL-2003 REPORT FROM THE COMMISSION TO THE COUNCIL Called for by the Joint Action on New Synthetic Drugs (97/396/JAI) concerning TMA-2 Called for by the Joint Action on New Synthetic Drugs (97/396/JAI) concerning 2C-I Called for by the Joint Action on New Syntheti
2007/467/EC-2007 COMMISSION DECISION setting up the Expert Group on Radio Frequency Identification
2004/551/CFSP-2004 COUNCIL JOINT ACTION on the establishment of the European Defence Agency

National Electrical Manufacturers Association（NEMA)

NEMA IRSC 101-2021 NEMA Position on Conformity Assessment

Association Francaise de Normalisation

FD ISO/TR 22281:2018 Welding Consumables - International Institute of Welding (IIW) Position on the Use of Trace Element Analysis When Specifying Consumables
FD A81-059*FD ISO/TR 22281:2018 Welding consumables - International Institute of Welding (IIW) position statement on the use of trace element analyses in welding consumable specifications
FD CEN/TR 15508:2007 Key properties of solid recovered fuels to use in establishing a classification system
FD X34-204*FD CEN/TR 15508:2007 Key properties of solid recovered fuels to be used for establishing a classification system

API - American Petroleum Institute

API STATEMENT OF POSITION-1974 STATEMENT OF POSITION ON DYEING OF HEATING OILS
API STATEMENT OF POSITION-1982 STATEMENT OF POSITION ON DYEING OF HEATING OILS

NEMA - National Electrical Manufacturers Association

NEMA EL P1-2018 NEMA Position Paper on Electronic Labeling

American Society for Testing and Materials (ASTM)

ASTM D8200-22 Standard Practice for Creating a Correlation to Compare Particle Size Distribution Results of Proppants by Dynamic Imaging Analyzers and Sieves
ASTM E473-14 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E135-09 Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E2363-06a Standard Terminology Relating to Process Analytical Technology in the Pharmaceutical Industry
ASTM E2363-06 Standard Terminology Relating to Process Analytical Technology in the Pharmaceutical Industry
ASTM D7235-21 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM D7235-21a Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM D7235-10 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM E2161-15(2019) Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology

KR-KS

KS I ISO TS 29041-2016 Gas mixtures－Gravimetric preparation－Mastering correlations in composition
KS P ISO 11663-2017 Quality of dialysis fluid for haemodialysis and related therapies

Korean Agency for Technology and Standards (KATS)

KS A ISO/IEC GUIDE 15:2003 ISO/IEC code of principles on “reference to standards”
KS I ISO TS 29041-2016(2021) Gas mixtures－Gravimetric preparation－Mastering correlations in composition
KS I ISO/TS 29041:2016 Gas mixtures-Gravimetric preparation-Mastering correlations in composition
KS I ISO/TS 29041:2010 Gas mixtures-Gravimetric preparation-Mastering correlations in composition
KS I ISO TS 29041:2016 Gas mixtures－Gravimetric preparation－Mastering correlations in composition
KS M 1996-2005 Determination of residual solvents in plastic film for packaging

GSO

BH GSO ISO/TS 29041:2016 Gas mixtures -- Gravimetric preparation -- Mastering correlations in composition
OS GSO ISO/TS 29041:2013 Gas mixtures -- Gravimetric preparation -- Mastering correlations in composition
GSO ISO 16087:2015 Implants for surgery -- Roentgen stereophotogrammetric analysis for the assessment of migration of orthopaedic implants
BH GSO ISO 16087:2017 Implants for surgery -- Roentgen stereophotogrammetric analysis for the assessment of migration of orthopaedic implants
SD 323-1989 Coal ash composition analysis method
OS GSO ISO 16087:2015 Implants for surgery -- Roentgen stereophotogrammetric analysis for the assessment of migration of orthopaedic implants

International Organization for Standardization (ISO)

ISO/IEC GUIDE 16:1978 Code of principles on third party certification systems and related standards
ISO/TR 21900:2018 Guidance for uncertainty analysis regarding the application of ISO/TS 10974
ISO/TS 29041:2008 Gas mixtures - Gravimetric preparation - Mastering correlations in composition
ISO/TR 22281:2018 Welding consumables - International Institute of Welding (IIW) position statement on the use of trace element analyses in welding consumable specifications
ISO/TR 19588:2017 Background information and guidance on environmental cyanide analysis

International Telecommunication Union (ITU)

ITU-T SERIES D SUPP 3-1993 Supplement 3; Handbook on the Methodology for Determining Costs and Establishing National Tariffs; Series D: General Tariff Principles Study Group III; 45 pp
ITU-T SERIE D SUPP 3 SPANISH-1996 Supplement 3 Handbook on the methodology for determining costs and establishing national tariffs
ITU-T SERIE D SUPP 3 FRENCH-1996 Supplement 3 Handbook on the methodology for determining costs and establishing national tariffs

WRC - Welding Research Council

BULLETIN 353-1990 POSITION PAPER ON NUCLEAR PLANT PIPE SUPPORTS
BULLETIN 487-2003 PVRC POSITION ON ENVIRONMENTAL EFFECTS ON FATIGUE LIFE IN LWR APPLICATIONS

American Welding Society (AWS)

WRC 353:1990 Position Paper On Nuclear Plant Pipe Supports

GB-REG

REG NASA-LLIS-4416-2012 Critical System Maturity Requirements, Critical System Analytic Model, and Critical System Certification Proces

AENOR

UNE-ISO/TS 29041:2010 EX Gas mixtures - Gravimetric preparation - Mastering correlations in composition.
UNE-EN 12883:2001 FOUNDING. EQUIPMENT FOR THE PRODUCTION OF LOST PATTERNS FOR THE LOST WAX CASTING PROCESS.
UNE-EN 12892:2001 FOUNDING. EQUIPMENT FOR THE PRODUCTION OF LOST PATTERNS FOR THE LOST FOAM CASTING PROCESS.

Danish Standards Foundation

DS/CEN/TR 15508:2007 Key properties on solid recovered fuels to be used for establishing a classification system
DS/IEC PAS 63313:2021 Position statement on germicidal UV-C irradiation – UV-C safety guidelines

UY-UNIT

UNIT 635-1981 Measurement of fiber content in animal feed
UNIT 641-1982 Measurement of cellulose content in animal feed
UNIT 642-1982 Measurement of hydrogen peroxide content in animal feed
UNIT 649-1982 Measurement of readily soluble chloride components in animal feed

ABS - American Bureau of Shipping

ABS 225-2016 GUIDANCE NOTES ON STRUCTURAL ANALYSIS OF SELF-ELEVATING UNITS
ABS 215-2015 GUIDANCE NOTES ON FAILURE MODE AND EFFECTS ANALYSIS (FMEA) FOR CLASSIFICATION
ABS 215 CORR-2015 GUIDANCE NOTES ON FAILURE MODE AND EFFECTS ANALYSIS (FMEA) FOR CLASSIFICATION
ABS 104-2005 GUIDANCE NOTES ON SPECTRAL-BASED FATIGUE ANALYSIS FOR FLOATING OFFSHORE STRUCTURES

Institute of Electrical and Electronics Engineers (IEEE)

AIEE No 1F-1958 AIEE Report on Guide for Statistical Analysis of Test Data

RO-ASRO

STAS SR 13300-2-1994 Starches. Methods of analysis.Origin establishement
STAS SR EN 602-1995 Aluminium and aluminium alloys. Wrought products. Chemical composition of semi products used for fabrication of articles for use in contact with food

Society of Automotive Engineers (SAE)

SAE ARP5758-2011 Trend Analysis for Maintaining Correlation of Gas Turbine Engine Test Cells

EU/EC - European Union/Commission Legislative Documents

75/318/EEC-1975 COUNCIL DIRECTIVE on the approximation of the laws of Member States relating to analytical@ pharmacotoxicological and clinical standards and protocols in respect of the testing of proprietary medicinal products
2009/C 46/06-2009 Notice concerning the implementation of Article 5 of Regulation (EC) No 551/2004 of the European Parliament and of the Council on the organisation and use of the airspace in the single European sky (Publication of Member States' decisions establishing fun

PT-IPQ

E E 16-1971 Thermal analysis method. Expansion analysis. Relevant quantitative analysis
E 233-1969 Aggregate. Ingredient analysis
E 234-1969 Aggregate. Ingredient analysis

American Society of Quality Control （ASQC)

ASQ Q3-1988 Sampling Procedures and Tables for Inspection of Isolated Lots by Attributes T36

(U.S.) Plastic Pipe Association

PPI STATEMENT V-2009 Position Statement on Recommended Color Code for Solid Wall Plastic Pipe
PPI STATEMENT W-2004 Position Statement on Improved Material Categories for Polyethylene Pressure Pipe

The Aluminum Association

AA T-5-1987 Position on Fracture Toughness Requirements and Quality Control Testing

ITE - Institute of Transportation Engineers

LP-222-1992 Single Point Urban Interchange Design and Operations Analysis

International Electrotechnical Commission (IEC)

IEC TS 62607-6-19:2021 Nanomanufacturing - Key control characteristics - Part 6-19: Graphene-based material - Elemental composition: CS analyser, ONH analyser
IEC PAS 63313:2021 Position statement on germicidal UV-C irradiation - UV-C safety guidelines