Connector Test Equipment

Connector Test Equipment, Total:425 items.

The international standard classification for "Connector Test Equipment" includes: Ground service and maintenance equipment .

The Chinese standard classification for "Connector Test Equipment" includes: Ground test equipment .

Professional Standard - Aerospace

QJ 2687A-2004 Communication specification for electrical ground support equipment of satellite

Defense Logistics Agency

DLA MIL-C-28777 A SUPP 1A-1985 CABLE ASSEMBLY, ELECTRONIC TEST EQUIPMENT, (3 WIRES, 125 AND 250 VOLTS AC AND 28 VOLTS DC) GROUNDING PLUG CONNECTOR, GENERAL SPECIFICATION FOR
DLA MIL-C-28777 A NOTICE 1-2003 CABLE ASSEMBLY, ELECTRONIC TEST EQUIPMENT, (3 WIRES, 125 AND 250 VOLTS AC AND 28 VOLTS DC) GROUNDING PLUG CONNECTOR, GENERAL SPECIFICATION FOR
DLA MIL-C-28777 A-1978 CABLE ASSEMBLY, ELECTRONIC TEST EQUIPMENT, (3 WIRES, 125 AND 250 VOLTS AC AND 28 VOLTS DC) GROUNDING PLUG CONNECTOR, GENERAL SPECIFICATION FOR

German Institute for Standardization

DIN EN 60512-15-4:2009-03 Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force (IEC 60512-15-4:2008); German version EN 60512-15-4:2008 / Note: DIN IEC 60512-8 (1994-05...
DIN EN 60512-15-5:2009-03 Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation (IEC 60512-15-5:2008); German version EN 60512-15-5:2008 / Note: DIN IEC 60512-8 (1994-05) re...
DIN EN 60512-15-1:2009-03 Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert (IEC 60512-15-1:2008); German version EN 60512-15-1:2008 / Note: DIN IEC 60512-8 (1994-05) remains valid alon...
DIN EN 60512-15-3:2009-03 Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional) (IEC 60512-15-3:2008); German version EN 60512-15-3:2008 / Note: DIN IEC 60512-8 (1994-05) remain...
DIN EN 60512-15-7:2009-03 Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment (IEC 60512-15-7:2008); German version EN 60512-15-7:2008 / Note: DIN IEC 60512-8 (1994-05) rema...
DIN EN 60512-15-6:2009-03 Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices (IEC 60512-15-6:2008); German version EN 60512-15-6:2008 / Note: DIN IEC 60512-8 (1994-05) re...
DIN EN 60512-24-1:2013-05*VDE 0687-512-24-1:2013-05 Connectors for electronic equipment – Tests and measurements
DIN EN 60512-27-100:2012-09*VDE 0687-512-27-100:2012-09 Connectors for electronic equipment – Tests and measurements
DIN EN 60512-9-3:2012-04*VDE 0687-512-9-3:2012-04 Connectors for electronic equipment – Tests and measurements
DIN EN 60512-8-2:2012-02*VDE 0687-512-8-2:2012-02 Connectors for electronic equipment – Tests and measurements
DIN EN 60512-20-1:2010-12*VDE 0687-512-20-1:2010-12 Connectors for electronic equipment – Tests and measurements
DIN EN 60512-16-21:2012-11*VDE 0687-512-16-21:2012-11 Connectors for electronic equipment – Tests and measurements
DIN EN 60512-22-1:2010-12*VDE 0687-512-22-1:2010-12 Connectors for electronic equipment – Tests and measurements
DIN EN 60512-17-1:2011-06*VDE 0687-512-17-1:2011-06 Connectors for electronic equipment – Tests and measurements
DIN EN 60512-17-4:2011-06*VDE 0687-512-17-4:2011-06 Connectors for electronic equipment – Tests and measurements
DIN EN 60512-17-2:2012-02*VDE 0687-512-17-2:2012-02 Connectors for electronic equipment – Tests and measurements
DIN EN 60512-29-100:2016-03*VDE 0687-512-29-100:2016-03 Connectors for electronic equipment – Tests and measurements
DIN EN 60512-26-100:2011-12*VDE 0687-512-26-100:2011-12 Connectors for electronic equipment – Tests and measurements
DIN EN 60512-23-2:2011-06*VDE 0687-512-23-2:2011-06 Connectors for electronic equipment – Tests and measurements
DIN EN 60512-21-1:2010-12*VDE 0687-512-21-1:2010-12 Connectors for electronic equipment – Tests and measurements
DIN EN 60512-99-001:2013-05*VDE 0687-512-99-001:2013-05 Connectors for electronic equipment – Tests and measurements
DIN EN 60512-9-4:2012-02*VDE 0687-512-9-4:2012-02 Connectors for electronic equipment – Tests and measurements
DIN EN 60512-7-2:2012-09*VDE 0687-512-7-2:2012-09 Connectors for electronic equipment – Tests and measurements
DIN EN 60512-20-3:2010-12*VDE 0687-512-20-3:2010-12 Connectors for electronic equipment – Tests and measurements
DIN EN 60512-7-1:2010-12*VDE 0687-512-7-1:2010-12 Connectors for electronic equipment – Tests and measurements
DIN EN 60512-9-1:2010-12*VDE 0687-512-9-1:2010-12 Connectors for electronic equipment – Tests and measurements
DIN EN 60512-9-2:2012-09*VDE 0687-512-9-2:2012-09 Connectors for electronic equipment – Tests and measurements
DIN EN 60512-1-100:2012-10*VDE 0687-512-1-100:2012-10 Connectors for electronic equipment – Tests and measurements
DIN EN 60512-19-1:2010-12*VDE 0687-512-19-1:2010-12 Connectors for electronic equipment – Tests and measurements
DIN EN 60512-8-1:2011-06*VDE 0687-512-8-1:2011-06 Connectors for electronic equipment – Tests and measurements
DIN EN 60512-17-3:2011-06*VDE 0687-512-17-3:2011-06 Connectors for electronic equipment – Tests and measurements
DIN EN IEC 60512-99-003:2024-06*VDE 0687-512-99-003:2024-06 Connectors for electrical and electronic equipment – Tests and measurements
DIN EN IEC 60512-23-3:2020-02*VDE 0687-512-23-3:2020-02 Connectors for electrical and electronic equipment – Tests and measurements
DIN EN IEC 60512-15-2:2018-10*VDE 0687-512-15-2:2018-10 Connectors for electrical and electronic equipment – Tests and measurements
DIN EN IEC 60512-99-002:2023-08*VDE 0687-512-99-002:2023-08 Connectors for electrical and electronic equipment – Tests and measurements
DIN EN IEC 60512-8-3:2018-10*VDE 0687-512-8-3:2018-10 Connectors for electrical and electronic equipment – Tests and measurements
DIN EN IEC 60512-9-5:2021-02*VDE 0687-512-9-5:2021-02 Connectors for electrical and electronic equipment – Tests and measurements
DIN EN IEC 60512-27-200:2023-07*VDE 0687-512-27-200:2023-07 Connectors for electrical and electronic equipment – Tests and measurements
DIN EN IEC 60512-1:2019-09*VDE 0687-512-1:2019-09 Connectors for electrical and electronic equipment – Tests and measurements
DIN EN IEC 60512-28-100:2020-08*VDE 0687-512-28-100:2020-08 Connectors for electrical and electronic equipment – Tests and measurements
DIN EN 60512-12-7:2001-11 Connectors for electronic equipment - Tests and measurements - Part 12-7: Soldering tests; Test 12g: Solderability, wetting balance method (IEC 60512-12-7:2001); German version EN 60512-12-7:2001
DIN EN 60512-10-4:2004-06 Connectors for electronic equipment - Tests and measurements - Part 10-4: Impact tests (free components), static load tests and overload tests - endurance tests and overload tests - Test 10d: Electrical overload (connectors) (IEC 60512-10-4:2003); Germ...
DIN EN 60512-11-2:2003-01 Connectors for electronic equipment - Tests and measurements - Part 11-2: Climatic tests; Test 11b: Combined/sequential cold, low air pressure and damp heat (IEC 60512-11-2:2002); German version EN 60512-11-2:2002 / Note: DIN IEC 60512-6 (1994-05) rema...
DIN EN 60512-11-3:2003-01 Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests; Test 11c: Damp heat, steady state (IEC 60512-11-3:2002); German version EN 60512-11-3:2002 / Note: DIN IEC 60512-6 (1994-05) remains valid alongside this standard...
DIN EN 61076-4-115:2004-02 Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment (IEC 61076-4-115:2003); German version EN 61076-4-115:2003
DIN EN 60512-23-7:2005-10 Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors (IEC 60512-23-7:2005); German version EN 60512-23-7:2005
DIN 18720:1995 Instrument and tripod connectors on surveying instruments
DIN EN 60512-15-6:2009 Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices (IEC 60512-15-6:2008); German version EN 60512-15-6:2008
DIN EN 60512-2-5:2004-01 Connectors for electronic equipment - Tests and measurements - Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance (IEC 60512-2-5:2003); German version EN 60512-2-5:2003 / Note: DIN IEC 60512-2 (1994-05) remains ...
DIN EN 60603-7-1:2012-01*VDE 0687-603-7-1:2012-01 Connectors for electronic equipment
DIN EN 60603-7-2:2011-03*VDE 0687-603-7-2:2011-03 Connectors for electronic equipment
DIN EN 60603-7-4:2011-03*VDE 0687-603-7-4:2011-03 Connectors for electronic equipment
DIN EN 60603-7-82:2017-07*VDE 0687-7-82:2017-07 Connectors for electronic equipment
DIN EN 60603-7-41:2011-01*VDE 0687-603-7-41:2011-01 Connectors for electronic equipment
DIN EN 60603-7-5:2011-03*VDE 0687-603-7-5:2011-03 Connectors for electronic equipment
DIN EN 60603-7-81:2016-10*VDE 0687-603-7-81:2016-10 Connectors for electronic equipment
DIN EN 60603-7-51:2011-01*VDE 0687-603-7-51:2011-01 Connectors for electronic equipment
DIN EN IEC 60603-7:2022-10*VDE 0627-603-7:2022-10 Connectors for electronic equipment
DIN EN 60603-7-71:2011-06*VDE 0687-603-7-71:2011-06 Connectors for electronic equipment
DIN EN 60512-12-5:2006-11 Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method (IEC 60512-12-5:2006); German version EN 60512-12-5:2006
DIN EN 60512-12-4:2006-11 Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method (IEC 60512-12-4:2006); German version EN 60512-12-4:2006
DIN EN 60512-16-8:2009-03 Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections) (IEC 60512-16-8:2008); German version EN 60512-16-8:2008 / Note: ...
DIN EN 60603-7-7:2011-06*VDE 0687-603-7-7:2011-06 Connectors for electronic equipment
DIN EN 60603-7-3:2011-03*VDE 0687-603-7-3:2011-03 Connectors for electronic equipment
DIN EN 60512-12-5 Berichtigung 1:2008-11 Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method (IEC 60512-12-5:2006); German version EN 60512-12-5:2006, Corrigendum to DIN EN 60512-12-5:2006-11...
DIN EN 60512-12-4 Berichtigung 1:2008-11 Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method (IEC 60512-12-4:2006); German version EN 60512-12-4:2006, Corrigendum to DIN EN 60512-12-4:2006-11; G...
DIN EN 12275 E:2010 Draft Document - Mountaineering equipment - Connectors - Safety requirements and test methods; German version prEN 12275:2010
DIN EN 60512-25-1:2002-08 Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a: Crosstalk ratio (IEC 60512-25-1:2001); German version EN 60512-25-1:2001 / Note: To be replaced by DIN IEC 60512-25-1 (2004-10).
DIN EN 60512-99-002 E:2015 Draft Document - Connectors for electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for engaging and separating connectors under electrical load connectors (IEC 48B/2438/CD:2015)
DIN EN 60512-12-3 Berichtigung 1:2008-11 Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting (IEC 60512-12-3:2006); German version EN 60512-12-3:2006, Corrigendum to DIN EN 60512-12-3:2006-11; German version CENELEC-C...
DIN EN 60512-23-4:2002-07 Connectors for electronic equipment - Tests and measurements - Part 23-4: Screening and filtering tests; Test 23d: Transmission line reflections in the time domain (IEC 60512-23-4:2001); German version EN 60512-23-4:2001
DIN EN 60512-25-4:2002-08 Connectors for electronic equipment - Tests and measurements - Part 25-4: Test 25d: Propagation delay (IEC 60512-25-4:2001); German version EN 60512-25-4:2001
DIN EN 60512-12-3:2006-11 Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting (IEC 60512-12-3:2006); German version EN 60512-12-3:2006
DIN EN 60512-1:2001 Connectors for electronic equipment - Tests and measurements - Part 1: General (IEC 60512-1:2001); German version EN 60512-1:2001

Comitato Elettrotecnico Italiano

CEI EN 60512-15-6:2010 Connectors for electronic equipment - Tests and measurements Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices
CEI EN 60512-16-8:2009 Connectors for electronic equipment - Tests and measurements Part 16-8: Mechanical tests on connections and terminations Test 16h: Insulating grip effectiveness (crimped connections)
CEI EN 60512-7-1:2011 Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)
CEI EN 60512-15-7:2010 Connectors for electronic equipment - Tests and measurements Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment
CEI EN 60512-1:2001 Connectors for electronic equipment - Test and measurements - Part 1: General
CEI EN 61076-4-115:2004 Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment
CEI EN 60512-23-7:2006 Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors
CEI EN 60512-8-1:2011 Connectors for electronic equipment - Tests and measurements Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse
CEI EN 60512-8-2:2012 Connectors for electronic equipment - Tests and measurements Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial
CEI EN 60512-15-1:2010 Connectors for electronic equipment - Tests and measurements Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert
CEI EN 60512-15-4:2010 Connectors for electronic equipment - Tests and measurements Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force
CEI EN 60512-8-3:2012 Connectors for electronic equipment - Tests and measurements Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever
CEI EN 60512-12-5:2006 Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, iron method
CEI EN 60512-25-1:2003 Connectors for electronic equipment - Tests and measurements - Part 25-1: Tests 25a - Crosstalk ratio
CEI EN 60512-26-100/A1:2010 Connectors for electronic equipment - Tests and measurements Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g
CEI EN 60512-15-3:2010 Connectors for electronic equipment - Tests and measurements Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional)
CEI EN 60512-26-100:2010 Connectors for electronic equipment - Tests and measurements Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g
CEI EN 60512-2-3:2003 Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests Test 2c: Contact resistance variation
CEI EN 60512-16-4:2010 Connectors for electronic equipment - Tests and measurements Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)
CEI EN IEC 60512-8-3:2018 Connectors for electrical and electronic equipment - Tests and measurements Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever
CEI EN 60512-15-5:2010 Connectors for electronic equipment - Tests and measurements Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation
CEI EN 60512-15-2:2010 Connectors for electronic equipment - Tests and measurements Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial)
CEI EN 60512-29-100:2016 Connectors for electronic equipment - Tests and measurements Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g
CEI EN 60512-22-1:2011 Connectors for electronic equipment - Tests and measurements Part 22-1: Capacitance tests - Test 22a: Capacitance
CEI EN 60512-25-5:2006 Connectors for electronic equipment - Tests and measurements - Part 25-5: Test 25e - Return loss
CEI EN 60512-2-6:2003 Connectors for electronic equipment - Tests and measurements - Part 2-6: Electrical continuity and contact resistance tests Test 2f: Housing (shell) electrical continuity
CEI EN 60512-25-4:2003 Connectors for electronic equipment - Tests and measurements - Part 25-4: Test 25d - Propagation delay
CEI EN 60512-24-1:2013 Connectors for electronic equipment - Tests and measurements Part 24-1: Magnetic interference tests - Test 24a: Residual magnetism
CEI EN 60512-99-001:2013 Connectors for electronic equipment - Tests and measurements Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power
CEI EN 60512-11-11:2003 Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests - Test 11k: Low air pressure

British Standards Institution (BSI)

BS EN 60512-10-4:2003 Connectors for electronic equipment - Tests and measurements - Test 10d - Electrical overload (connectors)
BS EN 60512-15-6:2008 Connectors for electronic equipment - Tests and measurements -Part 15-6: Connector tests (mechanical) - Test 15f - Effectiveness of connector coupling devices
BS EN 60512-25-1:2001 Connectors for electronic equipment. Test and measurements. Test 25a. Crosstalk ratio
BS EN 60512-11-13:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11n. Gas tightness, solderless wrapped connections
BS EN 60512-2-5:2003 Connectors for electronic equipment - Tests and measurements - Test 2e - Contact disturbance
BS EN 60512-25-4:2001 Connectors for electronic equipment. Test and measurements. Test 25d. Propagation delay
BS EN 60512-8-3:2011 Connectors for electronic equipment. Tests and measurements. Static load tests (fixed connectors). Test 8c. Robustness of actuating lever
BS EN 60512-29-100:2015 Connectors for electronic equipment. Tests and measurements - Signal integrity tests up to 500 MHz on M12 style connectors. Tests 29a to 29g
BS EN IEC 60512-8-3:2018 Connectors for electrical and electronic equipment. Tests and measurements. Static load tests (fixed connectors). Test 8c: Robustness of actuating lever
BS EN 60512-1-3:1997 Connectors for electronic equipment. Tests and measurements. General. Test 1c. Electrical engagement length
BS EN 60512-25-3:2001 Connectors for electronic equipment. Test and measurements. Test 25c. Rise time degradation
BS EN 60512-8-1:2010 Connectors for electronic equipment. Tests and measurements. Static load tests (fixed connectors). Test 8a. Static load, transverse
BS EN 60512-8-2:2011 Connectors for electronic equipment. Tests and measurements. Static load tests (fixed connectors). Test 8b. Static load, axial
BS EN 60512-9-1:2010 Connectors for electronic equipment - Tests and measurements - Endurance tests - Test 9a - Mechanical operation
BS EN 60512-19-3:1998 Connectors for electronic equipment. Tests and measurements. Chemical resistance tests. Fluid resistance
BS EN 60512-7-1:2010 Connectors for electronic equipment - Tests and measurements - Impact tests (free connectors) - Test 7a - Free fall (repeated)
BS EN IEC 60512-1:2018 Connectors for electrical and electronic equipment. Tests and measurements. Generic specification
BS EN IEC 60512-15-2:2018 Connectors for electrical and electronic equipment. Tests and measurements. Connector tests (mechanical). Test 15b: Insert retention in housing (axial)
BS EN 60512-7-2:2012 Connectors for electronic equipment. Tests and measurements. Impact tests (free connectors). Test 7b. Mechanical strength impact
BS EN 60512-15-1:2008 Connectors for electronic equipment. Tests and measurements. Connector tests (mechanical). Test 15a. Contact retention in insert
BS EN 60512-2-6:2002 Connectors for electronic equipment - Tests and measurements - Electrical continuity and contact resistance tests - Test 2f - Housing (shell) electrical continuity
BS IEC 60512-29-100:2015 Connectors for electronic equipment. Tests and measurements. Signal integrity tests up to 500 MHz on M12 style connectors. Tests 29a to 29g
BS EN 60512-11-9:2002 Connectors for electronic equipment - Tests and measurements - Climatic tests - Test 11i - Dry heat
BS EN 60512-11-10:2002 Connectors for electronic equipment - Tests and measurements - Climatic tests - Test 11j - Cold
BS EN 60512-16-4:2008 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations — Test 16d: Tensile strength (crimped connections)
05/30140229 DC IEC 60512-15-6. Connectors for electronic equipment. Tests and measurements. Part 15-6. Connector tests (mechanical). Test 15f. Effectiveness of connector coupling devices
BS EN 60512-15-7:2008 Connectors for electronic equipment. Tests and measurements. Connector tests (mechanical). Test 15g. Robustness of protective cover attachment
BS EN 60512-25-5:2004 Connectors for electronic equipment - Tests and measurements - Test 25e - Return loss
BS EN 60512-12-3:2006 Connectors for electronic equipment - Tests and measurements - Soldering tests - Solderability, de-wetting
BS IEC 60512-1-101:2015 Connectors for electronic equipment. Tests and measurements. Blank detail specification
BS EN 60512-26-100:2008+A1:2011 Connectors for electronic equipment. Tests and measurements. Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 Tests 26a to 26g
BS EN 60512-16-13:2008 Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations — Test 16m: Un-wrapping, solderless wrapped connections
05/30140234 DC IEC 60512-15-7. Connectors for electronic equipment. Tests and measurements. Part 15-7. Connector tests (mechanical). Test 15g. Robustness of protective cover attachment
BS EN 60512-11-11:2002 Connectors for electronic equipment - Tests and measurements - Climatic tests - Test 11k - Low air pressure
BS EN IEC 60512-11-1:2019 Connectors for electrical and electronic equipment. Tests and measurements - Climatic tests. Test 11a. Climatic sequence
BS EN 60512-2-3:2002 Connectors for electronic equipment - Tests and measurements - Electrical continuity and contact resistance tests - Test 2c - Contact resistance variation
BS EN 60512-23-7:2005 Connectors for electronic equipment - Tests and measurements - Screening and filtering tests - Test 23g - Effective transfer impedance of connectors
BS EN IEC 60512-23-3:2019 Connectors for electrical and electronic equipment. Tests and measurements. Screening and filtering tests. Test 23c: Shielding effectiveness of connectors and accessories. Line injection method
BS EN 60512-12-3:2006(2007) Connectors for electronic equipment — Tests and measurements — Part 12 - 3 : Soldering tests — Test 12c : Solderability, de - wetting
BS EN 60512-17-1:2010 Connectors for electronic equipment. Tests and measurements. Cable clamping tests. Test 17a. Cable clamp robustness
BS EN 60512-26-100:2008 Connectors for electronic equipment — Tests and measurements — Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 — Tests 26a to 26g
BS EN 60512-1-1:2002 Connectors for electronic equipment - Tests and measurements - General - Test 1a - Visual examination
BS EN 60512-15-2:2008 Connectors for electronic equipment - Tests and measurements -Part 15-2: Connector tests (mechanical) - Test 15b - Insert retention in housing (axial)
BS EN 60512-26-100:2009 Connectors for electronic equipment. Tests and measurements. Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7. Tests 26a to 26g
BS EN 60512-1-100:2012 Connectors for electronic equipment. Tests and measurements. General. Applicable publications
BS EN 60512-6-2:2002 Connectors for electronic equipment - Tests and measurements - Dynamic stress tests - Test 6b - Bump
BS EN 60512-15-3:2008 Connectors for electronic equipment. Tests and measurements. Connector tests (mechanical). Test 15c. Insert retention in housing (torsional)
BS EN IEC 60512-99-003:2023 Connectors for electrical and electronic equipment. Tests and measurements - Endurance test schedules. Test 99c: Test schedule for balanced single-pair connectors separating (unmating) under electrical load
BS EN 60512-3-1:2002 Connectors for electronic equipment - Tests and measurements - Insulation tests - Test 3a - Insulation resistance
BS EN 60512-5-1:2002 Connectors for electronic equipment - Tests and measurements - Current-carrying capacity tests - Test 5a - Temperature rise
BS EN 60512-6-3:2002 Connectors for electronic equipment - Tests and measurements - Dynamic stress tests - Test 6c - Shock
BS EN 60512-11-5:2002 Connectors for electronic equipment - Tests and measurements - Climatic tests - Test 11e - Mould growth
BS EN 60512-11-12:2002 Connectors for electronic equipment - Tests and measurements - Climatic tests - Test 11m - Damp heat, cyclic
BS EN 60512-11-6:2002 Connectors for electronic equipment - Tests and measurements - Climatic tests - Test 11f - Corrosion, salt mist

Danish Standards Foundation

DANSK DS/EN 60512-15-6:2008 Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices
DS/EN 60512-15-6:2008 Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices
DANSK DS/EN 60512-16-8:2008 Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections)
DS/EN 60512-16-8:2008 Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections)
DANSK DS/EN 60512-7-1:2010 Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)
DANSK DS/EN 60512-7-2:2012 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact
DANSK DS/EN 61076-4-115:2003 Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment
DS/EN 60512-15-1:2008 Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert
DANSK DS/EN 60512-1:2001 Connectors for electronic equipment – Tests and measurements – Part 1: General
DANSK DS/EN 60512-15-7:2008 Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment
DS/EN 60512-15-7:2008 Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment
DANSK DS/EN 60512-8-1:2010 Connectors for electronic equipment - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse
DS/EN 61076-4-115:2003 Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment
DANSK DS/EN 60512-23-7:2005 Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors
DS/EN 60512-15-2:2008 Connectors for electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial)
DS/EN 60512-15-4:2008 Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force
DANSK DS/EN 60512-15-4:2008 Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force
DS/EN 60512-8-2:2011 Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial
DANSK DS/EN 60512-8-2:2011 Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial
DANSK DS/EN 60512-15-1:2008 Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert
DS/EN 60512-11-13:2002 Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections
DS/EN 60512-8-1:2010 Connectors for electronic equipment - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse
DS/EN 60512-15-3:2008 Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional)
DANSK DS/EN 60512-11-13:2002 Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections
DS/EN 60512-23-7:2005 Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors
DS/EN 60512-2-5:2003 Connectors for electronic equipment - Tests and measurements - Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance
DANSK DS/EN 60512-2-5:2003 Connectors for electronic equipment - Tests and measurements - Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance
DS/EN 60512-16-4:2008 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)
DANSK DS/EN 60512-8-3:2011 Connectors for electronic equipment – Tests and measurements – Part 8-3: Static load tests (fixed connectors) – Test 8c: Robustness of actuating lever
DS/EN 60512-8-3:2012 Connectors for electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever
DANSK DS/EN 60512-2-3:2002 Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation
DS/EN 60512-25-1:2002 Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a - Crosstalk ratio
DS/EN 60512-12-3/Corr. 1:2007 Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting
DS/EN 60512-12-3:2006 Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting
DS/EN 60512-1:2001 Connectors for electronic equipment - Tests and measurements - Part 1: General
DANSK DS/EN 60512-22-1:2010 Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance
DANSK DS/EN 60512-26-100:2008 Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g
DS/EN 60512-26-100/A1:2011 Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g
DANSK DS/EN 60512-26-100/A1:2008 Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g
DS/EN 60512-26-100:2009 Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g
DS/EN 60512-2-3:2002 Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation
DANSK DS/EN 60512-15-3:2008 Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional)
DANSK DS/EN 60512-29-100:2015 Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g
DANSK DS/EN 60512-16-4:2008 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)
DS/EN 60512-12-5:2006 Connectors for electronic equipment – Tests and measurements – Part 12-5: Soldering tests – Test 12e: Resistance to soldering heat, soldering iron method
DS/EN 60512-12-4/Corr. 1:2008 Connectors for electronic equipment – Tests and measurements – Part 12-4: Soldering tests – Test 12d: Resistance to soldering heat, solder bath method
DS/EN 60512-12-4:2006 Connectors for electronic equipment – Tests and measurements – Part 12-4: Soldering tests – Test 12d: Resistance to soldering heat, solder bath method
DS/EN 60512-23-4:2001 Connectors for electronic equipment - Tests and measurements - Part 23-4: Screening and filtering tests - Test 23d: Transmission line reflections of connectors in the time domain
DANSK DS/EN 60512-23-4:2001 Connectors for electronic equipment - Tests and measurements - Part 23-4: Screening and filtering tests - Test 23d: Transmission line reflections of connectors in the time domain
DANSK DS/EN 60512-15-5:2008 Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation
DANSK DS/EN IEC 60512-8-3:2018 Connectors for electrical and electronic equipment – Tests and measurements – Part 8-3: Static load tests (fixed connectors) – Test 8c: Robustness of actuating lever
DS/EN 60512-12-5/Corr. 1:2007 Connectors for electronic equipment – Tests and measurements – Part 12-5: Soldering tests – Test 12e: Resistance to soldering heat, soldering iron method
DS/EN 60512-15-5:2008 Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation
DANSK DS/EN 60512-15-2:2008 Connectors for electronic equipment – Tests and measurements – Part 15-2: Connector tests (mechanical) – Test 15b: Insert retention in housing (axial)
DANSK DS/EN 60512-2-6:2002 Connectors for electronic equipment - Tests and measurements - Part 2-6: Electrical continuity and contact resistance tests - Test 2f: Housing (shell) electrical continuity
DS/EN 60512-22-1:2010 Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance
DS/EN 60512-25-5:2004 Connectors for electronic equipment - Tests and measurements - Part 25-5: Test 25e - Return loss
DANSK DS/EN 60512-25-4:2001 Connectors for electronic equipment - Testing and measurements - Part 25-4: Test 25d - Propagation delay
DS/EN 60512-25-4:2002 Connectors for electronic equipment - Testing and measurements - Part 25-4: Test 25d - Propagation delay
DS/EN 60512-16-11:2008 Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections
DS/EN 60512-16-13:2008 Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections
DANSK DS/EN 60512-24-1:2012 Connectors for electronic equipment - Tests and measurements - Part 24-1: Magnetic interference tests - Test 24a: Residual magnetism
DS/EN 60512-7-1:2010 Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)
DS/EN 60512-7-2:2012 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact
DANSK DS/EN 60512-2-1:2002 Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method
DANSK DS/EN 60512-11-11:2002 Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests - Test 11k: Low air pressure
DS/EN 60512-11-11:2002 Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests - Test 11k: Low air pressure
DANSK DS/EN 60512-27-100:2012 Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors - Tests 27a to 27g

Spanish Association for Standardization (UNE)

UNE-EN 60512-15-6:2008 Connectors for electronic equipment - Tests and measurements -- Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices (Endorsed by AENOR in December of 2008.)
UNE-EN 60512-16-8:2008 Connectors for electronic equipment - Tests and measurements -- Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections) (Endorsed by AENOR in November of 2008.)
UNE-EN 60512-7-2:2011 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact (Endorsed by AENOR in April of 2012.)
UNE-EN 60512-7-1:2010 Connectors for electronic equipment - Tests and measurements -- Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated) (Endorsed by AENOR in September of 2010.)
UNE-EN 12275:1999 MOUNTAINEERING EQUIPMENT. CONNECTORS. SAFETY REQUIREMENTS AND TEST METHODS
UNE-EN 60512-1:2003 Connectors for electronic equipment - Tests and measurements. Part 1: General.
UNE-EN 60512-15-7:2008 Connectors for electronic equipment - Tests and measurements -- Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment (Endorsed by AENOR in December of 2008.)
UNE-EN 61076-4-115:2003 Connectors for electronic equipment -- Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment (Endorsed by AENOR in December of 2003.)
UNE-EN 60512-15-1:2008 Connectors for electronic equipment - Tests and measurements -- Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert (Endorsed by AENOR in December of 2008.)
UNE-EN 60512-8-2:2011 Connectors for electronic equipment - Tests and measurements -- Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial (Endorsed by AENOR in September of 2011.)
UNE-EN 60512-15-4:2008 Connectors for electronic equipment - Tests and measurements -- Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force (Endorsed by AENOR in December of 2008.)
UNE-EN 60512-8-1:2010 Connectors for electronic equipment - Tests and measurements -- Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse (Endorsed by AENOR in November of 2010.)
UNE-EN 60512-11-13:2003 Connectors for electronic equipment - Tests and measurement -- Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections.
UNE-EN 60512-12-4:2006 CORR:2007 Connectors for electronic equipment - Tests and measurements -- Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method
UNE-EN 60512-25-1:2002 Connectors for electronic equipment - Tests and measurements -- Part 25-1: Test 25a - Crosstalk ratio.
UNE-EN 60512-12-5:2006 CORR:2007 Connectors for electronic equipment - Tests and measurements -- Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method
UNE-EN 60512-15-3:2008 Connectors for electronic equipment - Tests and measurements -- Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional) (Endorsed by AENOR in December of 2008.)
UNE-EN 60512-29-100:2015 Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g (Endorsed by AENOR in November of 2015.)
UNE-EN 60512-2-3:2002 Connectors for electronic equipment - Tests and measurements -- Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation.
UNE-EN 60512-26-100:2008 Connectors for electronic equipment - Tests and measurements -- Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g (Endorsed by AENOR in February of 2009.)
UNE-EN 60512-26-100:2008/A1:2011 Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g (Endorsed by AENOR in September of 2011.)
UNE-EN 60512-16-4:2008 Connectors for electronic equipment - Tests and measurements -- Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections) (Endorsed by AENOR in November of 2008.)
UNE-EN IEC 60512-8-3:2018 Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever (Endorsed by Asociación Española de Normalización in May of 2018.)
UNE-EN 60512-22-1:2010 Connectors for electronic equipment - Tests and measurements -- Part 22-1: Capacitance tests - Test 22a: Capacitance (Endorsed by AENOR in October of 2010.)
UNE-EN 60512-12-3:2006 CORR:2007 Connectors for electronic equipment - Tests and measurements -- Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting
UNE-EN 60512-15-5:2008 Connectors for electronic equipment - Tests and measurements -- Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation (Endorsed by AENOR in December of 2008.)
UNE-EN 60512-25-4:2002 Connectors for electronic equipment - Tests and measurements -- Part 25-4: Test 25d - Propagation delay.
UNE-EN 60512-25-5:2005 Connectors for electronic equipment - Tests and measurements -- Part 25-5: Test 25e - Return loss
UNE-EN 60512-2-6:2002 Connectors for electronic equipment - Tests and measurements -- Part 2-6: Electrical continuity and contact resistance tests - Test 2f: Housing (shell) electrical continuity.
UNE-EN 60512-11-11:2003 Connectors for electronic equipment - Tests and measurements -- Part 11-11: Climatic tests - Test 11k: Low air pressure.
AENOR UNE-EN IEC 60512-15-2:2018 Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial) (Endorsed by Spanish Association for Standardization in May of 2018.)
UNE-EN IEC 60512-15-2:2018 Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial) (Endorsed by Asociación Española de Normalización in May of 2018.)
UNE-EN 60512-24-1:2012 Connectors for electronic equipment - Tests and measurements - Part 24-1: Magnetic interference tests - Test 24a: Residual magnetism (Endorsed by AENOR in January of 2013.)

Austrian Standards

ONORM L 5261-1981 Testing of milking installations; connection for testing
ONORM E 1351-1986 Test equipment; jointed test finger

Association Francaise de Normalisation

NF EN 60512-15-6:2008 Connectors for electronic equipment - Tests and measurements - Part 15-6: (Mechanical) tests of connectors - Test 15f: Effectiveness of connector mating devices
NF EN 60512-26-100:2009 Connectors for electronic equipment - Tests and measurements - Part 26-100: measurement setup, test and reference devices and measurements for connectors conforming to IEC 60603-7 - Tests 26a to 26g
NF EN 60512-26-100/A1:2011 Connectors for electronic equipment - Tests and measurements - Part 26-100: measurement setup, test and reference devices and measurements for connectors conforming to IEC 60603-7 - Tests 26a to 26g
NF EN 61076-4-115:2003 Connectors for electronic equipment - Part 4-115: connectors for printed boards - Backplane connector for InfiniBand equipment
NF C93-400-26-100/A1*NF EN 60512-26-100/A1:2011 Connectors for electronic equipment - Tests and measurements - Part 26-100 : measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g.
NF EN 60512-10-4:2004 Connectors for electronic equipment - Tests and measurements - Part 10-4: impact tests (free components), impact tests under static load (fixed components), endurance tests and overload tests - Test 10d: electrical overload. .
NF C93-400-15-6*NF EN 60512-15-6:2008 Connectors for electronic equipment - Tests and measurements - Part 15-6 : connector tests (mechanical) - Test 15f : effectiveness of connector coupling devices.
NF EN 60512-11-3:2002 Connectors for electronic equipment - Tests and measurements - Part 11-3: climatic tests - Tests 11c: continuous damp heat test
NF EN 60512-15-3:2008 Connectors for electronic equipment - Tests and measurements - Part 15-3: (mechanical) tests of connectors - Test 15c: retention of insulation in the housing (torsion)
NF EN 60512-23-7:2005 Connectors for electronic equipment - Tests and measurements - Part 23-7: screening and filtering tests - Test 23g: effective transfer impedance of connectors
NF EN 60512-15-7:2008 Connectors for electronic equipment - Tests and measurements - Part 15-7: (mechanical) tests of connectors - Test 15g: robustness of the protective cover fixing
NF EN 60512-15-1:2008 Connectors for electronic equipment - Tests and measurements - Part 15-1: (Mechanical) tests of connectors - Test 15a: Contact retention in insulation
NF EN 60512-11-13:2002 Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wound connections
NF EN 60512-2-5:2003 Connectors for electronic equipment - Tests and measurements - Part 2-5: electrical continuity and contact resistance tests - Test 2e: contact disturbance
NF EN 60512-25-1:2002 Connectors for electronic equipment - Tests and measurements - Part 25-1: test 25a - Crosstalk rate
NF EN 60512-12-4:2006 Connectors for electronic equipment - Tests and measurements - Part 12-4: soldering tests - Test 12d: resistance to soldering heat, solder bath method
NF EN 60512-12-5:2006 Connectors for electronic equipment - Tests and measurements - Part 12-5: soldering tests - Test 12e: resistance to soldering heat, soldering iron method
NF EN IEC 60799/A1:2023 Small electrical equipment - Connector cords and interconnection connector cords
NF EN IEC 60512-15-2:2018 Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: (mechanical) tests of connectors - Test 15b: retention of insulation in the housing (axial)
NF C93-400-7-2*NF EN 60512-7-2:2012 Connectors for electronic equipment - Tests and measurements - Part 7-2 : impact Tests (free connectors)- Test 7b : mechanical strength impact
NF EN 60512-15-4:2008 Connectors for electronic equipment - Tests and measurements - Part 15-4: (mechanical) tests of connectors - Test 15d: force of insertion, unlocking and extraction of contacts
NF EN 60512-16-4:2008 Connectors for electronic equipment - Tests and measurements - Part 16-4: mechanical tests of contacts and outputs - Test 16d: tensile strength (crimped connections)
NF EN 60512-22-1:2011 Connectors for electronic equipment - Tests and measurements - Part 22-1: capacitance tests - Test 22a: capacitance
NF EN 60512-29-100:2015 Connectors for electronic equipment - Tests and measurements - Part 29-100: signal integrity tests up to 500 MHz on M12 type connectors - Tests 29a to 29g
NF C93-400-29-100*NF EN 60512-29-100:2015 Connectors for electronic equipment - Tests and measurements - Part 29-100 : signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g
NF EN 60512-99-001:2013 Connectors for electronic equipment - Tests and measurements - Part 99-001: test program relating to connections and disconnections under electrical load - Test 99a: connectors used in twisted pair communications cabling...
NF EN 60512-11-9:2002 Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat
NF EN 60512-25-5:2004 Connectors for electronic equipment - Tests and measurements - Part 25-5: test 25e - Return loss
NF EN 60512-11-10:2002 Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11d: cold
NF EN 60512-11-5:2002 Connectors for electronic equipment - Tests and measurements - Part 11-5: Climatic tests - Test 11e: Mold
NF EN 60512-12-3:2006 Connectors for electronic equipment - Tests and measurements - Part 12-3: soldering tests - Test 12c: solderability, dewetting
NF EN 60512-25-4:2002 Connectors for electronic equipment - Tests and measurements - Part 25-4: test 25d - Propagation delay
NF EN 60512-2-3:2002 Connectors for electronic equipment - Tests and measurements - Part 2-3: electrical continuity and contact resistance tests - Test 2c: variation of contact resistance
NF EN 12275:2013 Mountaineering and climbing equipment - Connectors - Safety requirements and test methods
NF C93-400-1:2001 Connectors for electronic equipment - Test and measurements - Part 1 : general.
NF EN 60512-11-11:2002 Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests - Test 11k: Low atmospheric pressure
NF C93-400-16-8*NF EN 60512-16-8:2008 Connectors for electronic equipment - Tests and measurements - Part 16-8 : mechanical tests on connections and terminations - Test 16h : insulating grip effectiveness (crimped connections)
NF C93-400-15-1*NF EN 60512-15-1:2008 Connectors for electronic equipment - Tests and measurements - Part 15-1 : connector tests (mechanical) - Test 15a : contact retention in insert
NF EN 60512-2-1:2002 Connectors for electronic equipment - Tests and measurements - Part 2-1: electrical continuity and contact resistance test - Test 2a: contact resistance - Millivolt level method
NF EN 60512-16-8:2008 Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests of contacts and outputs - Test 16h: Effectiveness of the insulating sleeve (crimped connections)
NF EN 60512-25-6:2004 Connectors for electronic equipment - Tests and measurements - Part 25-6: test 25f: eye diagram and jitter

Japanese Industrial Standards Committee (JISC)

JIS C 5402-15-6:2014 Connectors for electronic equipment.Tests and measurements.Part 15-6: Connector tests (mechanical tests).Test 15f: Effectiveness of connector coupling devices
JIS C 5402-15-1:2014 Connectors for electronic equipment.Tests and measurements.Part 15-1: Connector tests (mechanical).Test 15a: Contact retention in insert
JIS C 5402-1:2002 Connectors for electronic equipment -- Tests and measurements -- Part 1: General
JIS C 5402:1992 Method for test of connectors for use in electronic equipment
JIS C 5402-7-2:2019 Connectors for electronic equipment -- Tests and measurements -- Part 7-2: Impact tests (free connectors) -- Test 7b: Mechanical strength impact

Swedish Institute for Standards

SS-EN 60512-15-6:2010 Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices
SS-EN 60512-15-1:2010 Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert
SS-EN 61076-4-115:2004 Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment
SS-EN 60512-15-7:2010 Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment
SS-EN 60512-26-100:2009 Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g
SS-EN 60512-2-3:2002 Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation
SS-EN 60512-29-100:2016 Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g
SS-EN 60512-25-1:2002 Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a Crosstalk ratio
SS-EN 60512-25-5:2004 Connectors for electronic equipment - Tests and measurements - Part 25-5: Test 25e - Return loss
SS-EN 60512-16-11:2009 Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections
SS-EN 60512-27-100:2012 Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors - Tests 27a to 27g
SS-EN 60512-7-1:2010 Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)
SS-EN 60512-7-2:2012 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact test (free connectors) - Test 7b: Mechanical strength impact
SS-EN 60512-25-6:2004 Connectors for electronic equipment - Tests and measurements - Part 25-6: Test 25f: Eye pattern and jitter
SS-EN 60512-15-4:2010 Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force
SS-EN 60512-16-13:2009 Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections

Lithuanian Standards Office

LST EN 60512-15-6-2008 Connectors for electronic equipment - Tests and measurements -- Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices (IEC 60512-15-6:2008)
LST EN 61076-4-115-2004 Connectors for electronic equipment. Part 4-115: Printed board connectors. Backplane connector for InfiniBand equipment
LST EN 60512-16-8-2008 Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections) (IEC 60512-16-8:2008)
LST EN 60512-7-1-2010 Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated) (IEC 60512-7-1:2010)
LST EN 60512-15-7-2008 Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment (IEC 60512-15-7:2008)
LST EN 60512-16-4-2008 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections) (IEC 60512-16-4:2008)

Korean Agency for Technology and Standards (KATS)

KS C 6040-2004 Method for test of connectors for use in electronic equipment
KS C 6040-2014(2024) Method for test of connectors for electronic equipment
KS C IEC 60512-11-13-2014(2019) Connectors for electronic equipment — Tests and measurements — Part 11-13: Climatic tests — Test 11n: Gas tightness, solderless wrapped connections
KS C 6040-2014 Method for test of connectors for electronic equipment
KS C IEC 60512-23-7:2009 Connectors for electronic equipment-Tests and measurements-Part 23-7:Screening and filtering tests-Test 23g:Effective transfer impedance of connectors
KS C IEC 60512-23-7:2014 Connectors for electronic equipment － Tests and measurements － Part 23-7: Screening and filtering tests － Test 23g: Effective transfer impedance of connectors
KS C 6040-2024 Method for test of connectors for electronic equipment
KS C IEC 60512-23-7-2014 Connectors for electronic equipment－Tests and measurements－Part 23-7：Screening and filtering tests－Test 23g：Effective transfer impedance of connectors
KS C 6040-2019 Method for test of connectors for electronic equipment
KS C IEC 60512-1-2004(2009) Connectors for electronic equipment－Tests and measurements－Part 1：General
KS C IEC 60512-1-2014 Connectors for electronic equipment－Tests and measurements－Part 1：General
KS C IEC 60512-3:2002 Electromechanical components for electronic equipment-Basic testing procedures and measuring methods-Part 3:Current-carrying capacity tests
KS C IEC 60512-25-1-2004(2009) Connectors for electronic equipment － Tests and measurements － Part 25 － 1: Test 25a － Crosstalk ratio
KS C IEC 60512-3:2014 Electromechanical components for electronic equipment － Basic testing procedures and measuring methods － Part 3: Current － carrying capacity tests
KS C IEC 60512-12-3-2014 Connectors for electronic equipment － Tests and measurements － Part 12-3: Soldering tests － Test 12c: Solderability, de-wetting
KS C IEC 60512-25-4-2014 Connectors for electronic equipment－Tests and measurements－Part 25－4：Test 25d－Propagation delay
KS C IEC 60512-25-5-2014 Connectors for electronic equipment－Tests and measurements－Part 25-5：Test 25e－Return loss

GCC Standardization Organization

GSO IEC 60512-16-8:2015 Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections)
GSO IEC 60512-15-1:2015 Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert
GSO IEC 60512-2-1:2015 Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method
GSO IEC 60512-12-4:2015 Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method
GSO IEC 60512-25-1:2015 Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a - Crosstalk ratio
GSO IEC 60512-16-4:2015 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)
GSO IEC 60512-11-10:2015 Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold
GSO IEC 60512-12-3:2015 Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting
GSO IEC 60512-25-4:2015 Connectors for electronic equipment - Tests and measurements - Part 25-4: Test 25d - Propagation delay

The Directorate General of Specifications and Metrology (DGSM)

OS GSO IEC 60512-1:2015 Connectors for electronic equipment - Tests and measurements - Part 1: General
OS GSO IEC 60512-15-7:2015 Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment
OS GSO IEC 61076-4-115:2014 Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment
OS GSO IEC 60512-11-13:2015 Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections
OS GSO IEC 60512-15-1:2015 Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert
OS GSO IEC 60512-23-7:2015 Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors
OS GSO IEC 60512-8-2:2013 Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial
OS GSO IEC 60512-26-100:2013 Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g
OS GSO IEC 60512-16-4:2015 Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)
OS GSO IEC 60512-15-5:2015 Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation
OS GSO IEC 60512-2-6:2015 Connectors for electronic equipment - Tests and measurements - Part 2-6: Electrical continuity and contact resistance tests - Test 2f: Housing (shell) electrical continuity
OS GSO IEC 60512-12-3:2015 Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting
OS GSO IEC 60512-11-9:2015 Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat
OS GSO IEC 60512-11-10:2015 Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold
OS GSO IEC 60512-15-3:2015 Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional)
OS GSO IEC 60512-25-4:2015 Connectors for electronic equipment - Tests and measurements - Part 25-4: Test 25d - Propagation delay
OS GSO IEC 60512-99-001:2013 Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power

International Electrotechnical Commission (IEC)

IEC 60512-15-6:2008 Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices
IEC 60512-7-2:2011 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact
IEC 60512-29-100:2015 Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g
IEC 60512-1:2001 Connectors for electronic equipment - Tests and measurements - Part 1: General
IEC 60512-8-1:2010 Connectors for electronic equipment - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse
IEC 60512-16-8:2008 Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections)

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO IEC 60512-1:2016 Connectors for electronic equipment - Tests and measurements - Part 1: General
BH GSO IEC 60512-15-7:2016 Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment
BH GSO IEC 61076-4-115:2016 Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment
BH GSO IEC 60512-15-1:2016 Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert
BH GSO IEC 60512-2-5:2016 Connectors for electronic equipment - Tests and measurements - Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance
BH GSO IEC 60512-12-4:2016 Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method
BH GSO IEC 60512-25-1:2016 Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a - Crosstalk ratio
BH GSO IEC 60512-11-10:2016 Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold
BH GSO IEC 60512-26-100:2016 Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g
BH GSO IEC 60512-2-3:2016 Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation
BH GSO IEC 60512-12-3:2016 Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting
BH GSO IEC 60512-25-4:2016 Connectors for electronic equipment - Tests and measurements - Part 25-4: Test 25d - Propagation delay
BH GSO IEC 60512-11-9:2016 Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat
BH GSO IEC 60512-2-6:2016 Connectors for electronic equipment - Tests and measurements - Part 2-6: Electrical continuity and contact resistance tests - Test 2f: Housing (shell) electrical continuity
BH GSO IEC 60512-11-11:2016 Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests - Test 11k: Low air pressure
BH GSO IEC 60512-2-1:2016 Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method

Bureau of Indian Standards

IS/IEC 61076-4-115-2003 Connectors for electronic equipment Part 4-115: Printed board connectors Backplane connector for InfiniBand equipment
IS/IEC 60512-2-5-2003 Connectors for Electronic Equipment - Tests and Measurements - Part 2 Electrical Continuity and Contact Resistance Tests - Section 5 Test 2e: Contact Disturbance
IS/IEC 60512-2-6-2002 Connectors for Electronic Equipment - Tests and Measurements - Part 2 Electrical Continuity and Contact Resistance Tests - Section 6 Test 2f: Housing (Shell) Electrical Continuity
IS/IEC 60512-2-3-2002 Connectors for Electronic Equipment - Tests and Measurements - Part 2 Electrical Continuity and Contact Resistance Tests - Section 3 Test 2c: Contact Resistance Variation

European Committee for Electrotechnical Standardization（CENELEC）

EN 60512-15-6:2008 Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices
EN 60512-8-1:2010 Connectors for electronic equipment - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse
EN 60512-8-2:2011 Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial
EN 60512-7-2:2012 Connectors for electronic equipment - Tests and measurements Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact
EN IEC 60512-15-2:2018 Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial)
EN 60512-29-100:2015 Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g
EN 60512-16-8:2008 Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections)
EN 60512-27-100:2012 Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors - Tests 27a to 27g
EN 60512-7-1:2010 Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)

International Organization for Standardization (ISO)

ISO/CD TS 22175:2023 Connectors for respiratory devices

Standard Association of Australia （SAA）

AS C109:1941 Approval and test specification for apparatus connectors
AS C109:1946 Approval and test specification for apparatus connectors
AS C109:1948 Approval and test specification for apparatus connectors

SE-SIS

SIS SEN 43 13-1962 Connectors for electronic epuipment

European Telecommunications Standards Institute (ETSI)

ETSI ETR 143-1994 Equipment Engineering (EE); Connectors for test and disconnection points Display of alarms
ETSI ETR 143 ed.1 (1994-10)-1994 Equipment Engineering (EE); Connectors for test and disconnection points Display of alarms

TIA - Telecommunications Industry Association

RS-455-1980 STANDARD TEST PROCEDURES FOR FIBER OPTIC FIBERS@ CABLES@ TRANSDUCERS@ CONNECTING AND TERMINATING DEVICES

PT-IPQ

NP 1141-1976 Wires and electrical equipment. Copper conductor connectors, bracket connectors, related properties and tests
NP 1142-1976 Wires and electrical equipment. Copper conductor connector class, observe connectors, related properties and tests
NP 1143-1976 Wires and electrical equipment. Copper conductor connector class, covering connectors, related properties and tests
NP 1140-1976 Wires and electrical equipment. Copper conductor connector classes, bolt connectors, related properties and tests
NP 1139-1976 Wires and electrical equipment. Copper conductor connectors, screw connectors, related properties and tests

TH-TISI

TIS 2036-2009 Connectors for electronic equipment.tests and measurements.part 1: general