Compression pressure

Compression pressure, Total:148 items.

The international standard classification for "Compression pressure" includes: Measurement of force, weight and pressure , Pumps and motors , Protection against dangerous goods , Reinforced plastics , Integrated circuits. Microelectronics , Aircraft and space vehicles in general .

The Chinese standard classification for "Compression pressure" includes: Temperature and pressure instrument , Hydraulic and pneumatic device , Material and component for instrument and meter , Marking, packaging, transport and storage in general , Fibre reinforced composites , Microcircuit in general , Engine , Time measurement instrument .

---

Professional Standard - Machinery

• JB/T 14436-2022 Steam flaking mill
• JB/T 5491-2005 Diaphragm pressure gauge
• JB 20022-2004 Punch and die for tablet press
• JB/T 2834-2000 Tooth support
• JB/T 7039-2006 Hydraulic vane pumps

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

• GB/T 5351-2005 Fiber-reinforced thermosetting plastic composites pipe—Determination of short-time hydraulic failure pressure
• GB/T 21579-2008 Dangerous goods - Test method of time/pressure
• GB/T 24179-2009(英文版) Metallic materials—Residual stress determination—The indentation straingage method
• GB/T 5351-1985 Test method for short-time hydraulic failure pressure of fiber-reinforced thermosetting plastic pipe
• GB/T 28856-2012 Silicon piezoresistive pressure-sensitive chip

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

• GB/T 33922-2017 Wafer level test methods for MEMS piezoresistive pressure-sensitive die performances

Group Standards of the People's Republic of China

• T/CPSS 1008-2020 Voltage Dip and Short Interruption Immunity Testing Method for Low Voltage Electrical Equipment
• T/ZHAS 17-2023 Low-pressure capping type pressure cooker
• T/KYFX 8-2022 Kaiyang selenium-enriched tablets (pressed candy)
• T/SAAMM 1016-2023 Pressure compensated silicon film for emitters

Professional Standard - Military and Civilian Products

• WJ/Z 384-1995 Processing time quota for powerful spinning of rockets

Professional Standard - Aerospace

• QJ 710(1)-1982 side pressure reed
• QJ 1047-1992 Data Processing Specifications for Pressure - Time and Thrust - Time of Solid Rocket Engine
• QJ 1047-1986 Solid rocket motor pressure-time, thrust-time data processing specification
• QJ 576-1981 Cold-pressed solder tab

National Metrological Technical Specifications of the People's Republic of China

• JJF 1658-2017 Calibration Specification for Loss-of-voltage Timers

Professional Standard - Electricity

• DL/T 566-1995 Technical requirements for loss - of - Voltage timers

Professional Standard - Business

• SB 10347-2001 Tablet Candy

Military Standard of the People's Republic of China-General Armament Department

• GJB 2533-1995 Permissible atmosphere pressure limits' of submarine compartment for torpedo launching
• GJB 736.16-1994 Pyrotechnics Test Method Ignition Pressure-Time Curve Determination

Professional Standard - Aviation

• HB 3353-1981 Pressure blade screw

Professional Standard - Agriculture

• 药品检验补充检验方法和检验项目批准件编号2006002 Qingnao Jiangya Tablets

Japanese Industrial Standards Committee (JISC)

• JIS B 8275:1993 Cover plate for pressure vessels
• JIS B 8351:1999 Vane pumps for hydraulic use

SCC

• AWWA DSS63726 What Happens When the Pressure Drops
• HOLDEN HN 2424-2014 Deadener Patch - Pressure Sensitive
• SAE AMSDTL22499B-2018 Shim Stock, Laminated (Stabilized: May 2018)
• MIL MIL-G-46898-1974 GASKETING, RF AND PRESSURE (NO S/S DOCUMENT)
• BS 3757-2:1965 Rigid PVC sheet. Calendered and extruded sheet
• NS-EN 837-3:1996 Pressure gauges — Part 3: Diaphragm and capsule pressure gauges — Dimensions, metrology, requirements and testing
• CSA B137.2-1993 PVC Injection-Moulded Gasketed Fittings for Pressure Applications
• CAN/CSA-B137.2-M89-1989 PVC Injection-Moulded Gasketed Fittings for Pressure Applications
• DANSK DS/EN ISO 2556:2000 Plastics - Determination of the gas transmission rate of films and thin sheets under atmospheric pressure - Manometric method
• MIL MIL-DTL-9395J-2014 Switches, Pressure, (Absolute, Gage, and Differential), General Specification for
• MIL MIL-DTL-9395K-2016 Switches, Pressure, (Absolute, Gage, and Differential), General Specification for
• NS 2551:1969 Shipbuilding - Full face gaskets - Nominal pressures PN 10 to PN 40
• NS 3549:1987 Watertight flexible sheets — Test for impermeability to water pressure upon slits
• VDI 3004-2014 Forcing pins with steel pressure spring or gas pressure spring
• BS 3757-1:1964 Rigid PVC sheet. Pressed sheet

HU-MSZT

• MSZ 7412-1960 Temporary cast steel valve rated for 100 pressure
• MSZ 7418-1960 Temporary irreversible steel valve rated for pressure 160
• MSZ 7410-1960 Temporary irreversible steel valve rated pressure 25/40
• MSZ 7398-1960 Temporary closed steel valve with rated pressure 160
• MNOSZ 12938-1952 Chemical machinery and equipment sheet extrusion can be closed edge pressure 6.100
• MSZ 7419-1960 Rated pressure 250, temporary cast steel irreversible valve
• MNOSZ 12999-1954 Chemical machinery and equipment round gasket pressure 64
• MNOSZ 11054-1952 Rubber hose pressure gasket wire connection
• MSZ 7411-1960 64 pressure rated cast steel temporary faucet valve
• MSZ 7414-1960 Temporary cast steel irreversible valve rated for pressure 250
• MSZ 8473-1958 Temporary closed iron valve with rim pressure rating of 6
• MSZ 7397-1960 64/100 pressure rated temporary closure cast steel valve
• MSZ 7399-1960 250 edge pressure cast steel temporary seal valve

National Aeronautics and Space Administration (NASA)

• NASA NACA-RM-L52K06-1952 Pressure distribution and pressure drag for a hemispherical nose at Mach numbers 2.05, 2.54, and 3.04
• NASA-TP-3358 SUPP-1993 Experimental cavity pressure measurements at subsonic and transonic speeds Static-pressure results Includes Supplement
• NASA NACA-RM-A50E02-1950 Pressure-distribution and ram-recovery characteristics of NACA submerged inlets at high subsonic speeds
• NASA NACA-RM-A55K09-1956 Force, moment, and pressure-distribution characteristics of rectangular wings at high angles of attack and supersonic speeds

IN-BIS

• IS 7466-1994 Rubber gaskets for pressure cookers - specification
• IS 7466-1974 Specification for rubber gaskets for pressure cookers
• IS 12208-1987 How to measure earth pressure with hydraulic pressure sensor

SE-SIS

• SIS SMS 1149-1959 Food pipe, gasket, pressure rating: 6
• SIS SMS 1561-1952 Pressure gauges, displays, pictures and scales
• SIS SMS 1560-1952 Pressure gauge, display, picture and center scale
• SIS SMS 1230-1975 Pipeline systems. Nominal pressure, PN. Working pressure. Test pressure

General Motors Corporation (GM)

• GM 9985882-1992 Adhesive, Patch, Elastomeric, Pressure Sensitive

American Society of Mechanical Engineers (ASME)

• ASME PVHO-1-1997 Safety standards for pressure vessels for human occupancy
• ASME PVHO-1a Addenda-1997 Safety standards for pressure vessels for human occupancy; Addenda

CZ-CSN

• CSN ON 07 1124-1966 Manliole Covers 420X320 for Construclional Prcssures to 45 at
• CSN ON 10 5104-1963 Piston compressors and air coolers Compressor power 25-200 nr/h/Compressor power and pressure/
• CSN ON 07 1125-1966 Manhole Cover 420X320 far Constructional Pressures over 45 to 78 at
• CSN ON 07 1127-1966 Manhtfle Caver 420X320 for Constructional Pressures over 78 to 166 at
• CSN 25 7011 Za-1996 Pressure gauges. Terminology of pressure gauges
• CSN 25 7864-1967 Diaphragm gas meters for working pres- sure up to 250 kp/m2
• CSN 25 7863-1967 Diaphragm gas meters for working pres^ sure up to 500 kp/m2

Aerospace Industries Association

• AIA NAS 1494-1961 Terminal, Lug - Single Hole Tongue, Single Barrel, Pressure Grip Type R(1980)

BE-NBN

• NBN G 55-003-1975 Determination of burst pressure and burst deformation pressure. Diaphragm Burst Gauge Method
• NBN C 42-502-1983 pressure transformer
• NBN 629-1972 Boiler steel plates, sheets and strips for high temperature pressure vessels

American National Standards Institute （ANSI)

• ANSI/ASTM D1599:1999 Test Method for Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
• ANSI/ASME B40.100-2013 Pressure Gauges and Gauge Attachments

YU-JUS

• JUS M.E2.231-1984 Pressure vessels. Nonalloyed and alloyed steel plates
• JUS M.E2.250-1991 Pressure vessels. Design of pressure vessels
• JUS M.E2.254-1991 Pressure vessels. Design of pressure vessels
• JUS M.E2.259-1991 Pressure vessels. Design of pressure vessels
• JUS M.E2.252-1991 Pressure vessels. Desigv of pressure vessels
• JUS M.E2.256-1991 Pressure vessels. ?eslgv of pressure vessels
• JUS M.E2.251-1991 Pressure vessels. Design of pressure vessels

AIA/NAS - Aerospace Industries Association of America Inc.

• NAS1494-1961 Terminal@ Lug - Single Hole Tongue@ Single Barrel@ Pressure Grip Type

U.S. Military Regulations and Norms

• ARMY A-A-52468 VALID NOTICE 1-2004 GASKET: FILTER, FLUID, PRESSURE, AUTOMOTIVE FUEL
• ARMY A-A-52468-1993 GASKET: FILTER, FLUID, PRESSURE, AUTOMOTIVE FUEL

Aeronautical Radio Inc.

• ARINC 413A SEC 3.0 Voltage Transients

TR-TSE

• TS 14-1977 Cast ?ron with Lamellar Graphite Pipes And Fittings, For Pressure Main Lines

VDI - Verein Deutscher Ingenieure

• VDI 3145 Blatt 1-1984 Presses for cold forging; mechanical and hydraulic presses

American Society for Testing and Materials (ASTM)

• ASTM F2467-06(2013) Standard Practice for Measuring Static Sealing Pressure Using Pressure-Indicating Film (PIF) in Transportation Applications
• ASTM F2467-06 Standard Practice for Measuring Static Sealing Pressure Using Pressure-Indicating Film (PIF) in Transportation Applications
• ASTM F2467-05 Standard Practice for Measuring Static Sealing Pressure Using Pressure-Indicating Film (PIF) in Transportation Applications

Society of Automotive Engineers (SAE)

• SAE AMS2615E-2002 Pressure Testing, Hydraulic, Pressure as Specified
• SAE ARP510-1995 MOMENT WEIGHT OF TURBINE AND COMPRESSOR ROTOR BLADES
• SAE ARP510A-2012 Moment Weight of Turbine and Compressor Rotor Blades
• SAE ARP1323A-1990 Type Measurements of Airplane Interior Sound Pressure Levels During Cruise

Aerospace Industries Association/ANSI Aerospace Standards

• AIA/NAS NAS1494-2014 TERMINAL, LUG, SINGLE HOLE TONGUE, SINGLE BARREL, PRESSURE GRIP TYPE (Rev 2)
• AIA/NAS NAS1494-2010 TERMINAL, LUG, SINGLE HOLE TONGUE, SINGLE BARREL, PRESSURE GRIP TYPE Rev. 1
• AIA/NAS NAS 1494-1961 Terminal, Lug - Single Hole Tongue, Single Barrel, Pressure Grip Type

Spanish Association for Standardization (UNE)

• UNE 19 002 pipeline. Pressure segment setting. Rated pressure; working pressure; test pressure

RU-GOST R

• GOST 4.58-1985 System of product quality indices. Pressure gauges, vacuum gauges, pressure-and-vacuum gauges, braught gauges, head gauges, draught-and-head gauges. Nomenclature of indices
• GOST 21023-1975 Power transformers. Methods of measuring partial discharge characteristics during power frequency voltage testing
• GOST 29012-1991 Powder metallurgy. Method of determination of compacts dimensional changes after compacting pressure relief and at the time of sintering
• GOST 26605-1993 Polymeric materials cellular flexible. Determination of stress-strain characteristics in compression and compression stress
• GOST 17245-1979 Soils. Method of laboratory determination of temporary resistance for single-exial compression

German Institute for Standardization

• DIN EN 837-3:1997 Pressure gauges - Part 3: Diaphragm and capsule pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-3:1996
• DIN 14421:2017-04 Pressure gauges (manometer) for fire pumps
• DIN 14421 E:2016-05 Pressure gauges (manometer) for fire pumps
• DIN EN 837-3:2019-08 Pressure gauges - Part 3: Diaphragm and capsule pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-3:1996

CU-NC

• NC 90-11-1971 Manometer Accessories. Connecting Piece with Doubles Sided Metric Thread.

ESDU - Engineering Sciences Data Unit

• ESDU 82028-1982 Pressure drag of spherically-blunted conical forebodies at zero incidence for Mach numbers of 3 and above.
• ESDU 80021 B-1989 Pressure drag of blunt forebodies at zero incidence for Mach numbers up to 10.

FI-SFS

• SFS 5368-1987 Pipe rack. Tablet pressing

Korean Agency for Technology and Standards (KATS)

• KS B ISO 18084-2007(2012) Press tools for tablets－Punches and dies
• KS G 3602-2014 Domestic pressure pans and pressure pots
• KS R ISO 6310:2014 Road vehicles — Brake linings — Compressive strain test methods
• KS G 3602-1995 Domestic pressure pans and pressures pots
• KS R ISO 6310:2008 Road vehicles-Brake linings-Compressive strain test method
• KS G 3602-2007 Domestic pressure pans and pressure pots
• KS G 3602-2019 Domestic pressure pans and pressure pots

SAE - SAE International

• SAE ARP510A-2001 Moment Weight of Turbine and Compressor Rotor Blades
• SAE ARP510B-2019 Moment Weight of Turbine and Compressor Rotor Blades
• SAE ARP510-1959 Moment Weight of Turbine and Compressor Rotor Blades

US-FCR

• FCR FED H-08-4 VOL 4-E-G-1-1988 TRANSFORMER SCHEDULE

GOSTR

• GOST 26605-2017 Cellular flexible polymeric materials. Determination of stress-strain characteristics in compression and compression stress

GB-REG

• REG NACA-TN-2612-1952 Stress Problems in Pressurized Cabins

Association Francaise de Normalisation

• NF E15-038:1989 INDUSTRIAL PRESSURE GAUGES. METALLIC PRESSURE GAUGE INDICATORS. ABSOLUTE PRESSURE GAUGES.
• NF E15-034:2000 Industrial pressure gauges - Metallic pressure gauge indicators - Differential gauges.
• NF E15-034:1989 INDUSTRIAL PRESSURE GAUGES. METALLIC PRESSURE GAUGE INDICATORS. DIFFERENTIAL GAUGES.

Institute of Electrical and Electronics Engineers (IEEE)

• IEEE Std C57.12.10/COR 1-2012 Standard Requirements for Liquid-Immersed Power Transformers Corrigendum 1: Correction of 5.1.9 Sudden Pressure Relay

GSO

• GSO ISO 2556:2015 Plastics -- Determination of the gas transmission rate of films and thin sheets under atmospheric pressure -- Manometric method

British Standards Institution (BSI)

• ASME B40.100-2022 Pressure Gauges and Gauge Attachments

International Organization for Standardization (ISO)

• ISO 6310:2009 Road vehicles - Brake linings - Compressive strain test methods
• ISO 6310:2001 Road vehicles - Brake linings - Compressive strain test method

DE-GPVA

• AD 2000-Merkblatt HP801 No.39-2002 Manufacture and testing of pressure vessels.Special pressure vessels.Pressure vessels in isostatic presses

The American Road & Transportation Builders Association

• AASHTO T 226-1990 Standard Method of Test for Triaxial Compressive Strength of Undrained Rock Core Specimens without Pore Pressure Measurements

United States Navy

• NAVY MS28077 REV D VALID NOTICE 1-1987 GAGE-PRESSURE, DIAL INDICATING, MANIFOLD PRESSURE
• NAVY MS28077 REV D-1980 GAGE-PRESSURE, DIAL INDICATING, MANIFOLD PRESSURE

Association of German Mechanical Engineers

• VDI 3145 Blatt 2-1985 Presses for cold forging; multi-stage presses

AASHTO - American Association of State Highway and Transportation Officials

• DIVISION I 13.7-1996 Compression Members (Interim 1998)

Others: Compression pressure,pressure negative pressure,Pressure during pressing,Compression pressure,piezoresistive pressure sensor,Differential pressure transmitter,column pressure,Differential Pressure Transmitter Pressure,Absolute pressure sensor