Other materials and properties

Other materials and properties, Total:61 items.

The international standard classification for "Other materials and properties" includes: Thermoplastic materials , Other materials for the reinforcement of composites , Thermal insulation , Commercial refrigerating appliances .

The Chinese standard classification for "Other materials and properties" includes: Petrochemical and chemical industry engineering , Basic standards and general methods for synthetic resin and plastic , Basic standards and general methods , Heat insulation, sound absorption, light fireproof material , Refrigeration equipment .

Professional Standard - Building Materials

JC/T 2268-2014 Measurement of copper and other elements in brake friction materials

Professional Standard - Chemical Industry

HG/T 20703.2-2000 engineering design supervision specifications for equipment of chemical units

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33613-2017 Test method for tensile properties of 3D braided fabric and its polymer matrix composites
GB/T 33614-2017 Test method for compression properties of 3D braided fabric and its polymer matrix composites
GB/T 34445-2017 Test method of hot-tack property for heat sealing surfaces of thermoplastic polymer and thermoplastic composite material
GB/T 33621-2017 Test method for bending properties of 3D braided fabric and its polymer matrix composites

Taiwan Provincial Standard of the People's Republic of China

CNS 8423-1982 Orange Shellac and Other Lacs
CNS 5885-1980 Method of Test for Hygroscopic Moisture (And Other Matter Volatile Under the Test Condition) in Pigments
CNS 2825-1985 Hog and Other Animal Hairs, Not Carded or Combed

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 17146-2015 Test methods for water vapour transmission properties of building materials and products
GB/T 28493-2012 Test method for rating vending machines for bottled,canned and other sealed beverages

未注明发布机构

AS 4049.4:2006(R2016) Paints and related materials - Pavement marking materials - High performance pavement marking systems

国家质量监督检验检疫总局

SN/T 4879-2017 Test methods for determining flammability characteristics of polymer and its composite materials—Microscale combustion calorimetry method

Association Francaise de Normalisation

NF G62-001:1982 FOOTWEAR. DETERMINATION OF THE ABRASION RESISTANCE OF SOLING MATERIALS (LEATHER AND VARIOUS MATERIALS) USED IN THE FOOTWEAR INDUSTRY.
NF J95-046-3:2002 Small craft - Hull constructions and scantlings - Part 3 : materials : steel, aluminium alloys, wood, other materials.
NF T56-106:1979 Cellular materials based on rubber or plastics. Determination of the content of water and other materials volatile at 70 degrees C in rigid cellular materials.
NF T54-978:2008 Plastics piping systems - Buried and above ground systems for water and other fluids under pressure - Performance characteristics for pipes, fittings and their joints.

VDI - Verein Deutscher Ingenieure

VDI 2020-1972 Plastic materials; preparation of material performance sheets and hints for their application

British Standards Institution (BSI)

BS EN ISO 12215-3:2002 Small craft. Hull construction and scantlings. Materials. Steel, aluminium alloys, wood, other materials
BS EN ISO 12215-3:2018 Small craft. Hull construction and scantlings. Materials: Steel, aluminium alloys, wood, other materials
BS 2782-8 Method 826A:1992 Methods of testing plastics - Other properties - Determination of adhesion of print on plastics sheet
BS EN 15014:2007 Plastics piping systems - Buried and above ground systems for water and other fluids under pressure - Performance characteristics for pipes, fittings and their joints
BS EN 15014:2008 Plastics piping systems. Buried and above ground systems for water and other fluids under pressure. Performance characteristics for pipes, fittings and their joints
BS ISO 20370:2009 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of acetate content

ZA-SANS

SANS 12215-3:2008 Small craft - Hull construction and scantlings Part 3: Materials: Steel, aluminium alloys, wood, other materials

CEN - European Committee for Standardization

EN ISO 12215-3:2018 Small craft - Hull construction and scantlings - Part 3: Materials: Steel@ aluminium alloys@ wood@ other materials

International Organization for Standardization (ISO)

ISO 21702:2019 Measurement of antiviral activity on plastics and other non-porous surfaces
ISO 12215-3:2002 Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloys, wood, other materials

AR-IRAM

IRAM OFICIAL 11 N I O-1949 Diameter and other linear standard volumes

Japanese Industrial Standards Committee (JISC)

JIS F 1034-3:2006 Small craft -- Hull construction and scantlings -- Part 3: Materials: Steel, aluminium alloys, wood, other materials
JIS B 5201:1989 Jig bushings and accessories

SCC

BS 3120:1959 Specification for performance requirements of flameproof materials for clothing and other purposes
CIE 038-1977 Radiometric and photometric characteristics of materials and their measurement

European Committee for Standardization (CEN)

EN ISO 12215-3:2002 Small Craft - Hull Construction and Scantlings - Part 3: Materials: Steel, Aluminium Alloys, Wood, Other Materials ISO 12215-3:2002
EN 15014:2007 Plastics piping systems - Buried and above ground systems for water and other fluids under pressure - Performance characteristics for pipes, fittings and their joints

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC MI-660 5.0-1984 Resists and Other Coatings
IPC MI-660 SECTION 5 Resists and Other Coatings

CH-SNV

SN 640 284 Beil-1985 Textiles: Specific provisions for moth and beetle protection on wool and other keratin-containing materials

SE-SIS

MNC 310 E-1989 Metallic materials — Testing — General physical, chemical, electrical and other properties — Summary
MNC 310-1989 Metallic materials — Testing — Generalphysical, chemical, electrical and other properties — Summary
SIS SS-ISO 3882:1988 Metaliic and other non-organic coatings - Review of methods of measurement of thickness

Society of Automotive Engineers (SAE)

SAE J2975-2020 Measurement of Copper and Other Elements in Brake Friction Materials
SAE J2975-2011 Measurement of Copper and Other Elements in Brake Friction Materials
SAE J2975-2013 Measurement of Copper and Other Elements in Brake Friction Materials
SAE AS4716B-2011 Gland Design, O-ring and Other Elastomeric Seals

SAE - SAE International

SAE J2975-2015 Measurement of Copper and Other Elements in Brake Friction Materials

Standard Association of Australia （SAA）

AS 4049.4:2006 Paints and related materials - Pavement marking materials - High performance pavement marking systems

VN-TCVN

TCVN 4326-2001 Animal feeding stuffs.Determination of moisture and other volatile matter content

German Institute for Standardization

DIN 16781-2:1989 Plastics moulding materials; polyoxymethylene (POM) moulding materials; preparation of specimens and determination of their properties
DIN 53246:1997 Solvents for paints and varnishes - Acetic esters - Delivery specification, further requirements and methods of test

American Society for Testing and Materials (ASTM)

ASTM B479-00 Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications
ASTM B479-06 Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications
ASTM D7001-04 Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
ASTM D7001-05 Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
ASTM A479/A479M-16 Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

RO-ASRO

STAS SR EN 22063-1995 Metallic and other inorganic coatings. Thermal spraying. Zinc, aluminium and their alloys

ES-AENOR

UNE 53-522-1991 Rubber test mixes. Preparation, mixing and vulcanizatoin. Equipment and procedures
UNE 59-013-1986 Determination of water and other volatile substances in leather
UNE 53-567-1989 Specification for non-honeycomb pre-sectioned materials for window gaskets, panels and other similar building structures

Canadian General Standards Board （CGSB)

CGSB 1-GP-71 METH 69.3-1982 Methods of Testing Paints and Pigments Ash Content of Varnish, Tar-Base and Other Coatings

American National Standards Institute （ANSI)

ANSI/ASTM E1740:2010 Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter

Others: Other materials and properties