Hexapod Collision Cell

Hexapod Collision Cell, Total:35 items.

The international standard classification for "Hexapod Collision Cell" includes: Road vehicles in general , Electrical engineering in general , Bolts, screws, studs .

The Chinese standard classification for "Hexapod Collision Cell" includes: Hygiene, safety and labor protection , Electrical equipment and tool in general , Fastener .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 31.2-1988 Hex Head Screw Bolt with Hole Thin Rod Grade B
GB/T 44131-2024 Post-crash safety requirement for fuel cell electric vehicle
GB/T 31.2-1988 Hexagon bolts with split pin hole on shank-Reduced shank-Product grade B
GB/T 5784-1986 Hexagon head bolts; Reduced shank; Product grades B
GB/T 20138-2023 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
GB/T 20138-2006 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)

DB44/T 1481-2014 Integral crash requirements and test methods for power battery packs used in electric vehicles

T/HNNMIA 3-2023 Determination of silicon content in primary agricultural products of plant origin - Microwave digestion-collision cell inductively coupled plasma mass spectrometry

NF S83-202:1995 Watchmaking - Lever escapements - Crashing of the blank
NF R10-215:2002 Road vehicles - Frontal fixed barrier or pole impact test procedure.
NF EN 1317-3:2010 Road restraint systems - Part 3: performance classes, crash test acceptance criteria and test methods for crash attenuators
XP ENV 1317-4:2002 Road restraint systems - Part 4: performance classes, acceptance criteria for impact tests and methods of testing crash barrier ends and connections
NF C20-015:1995 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (ik code).

ISC-C92-054A-2010 Polypropylene material for car door trims for side impact bars

KS R ISO 3560-2014(2024) Road vehicles — Frontal fixed barrier or pole impact test procedure

BH GSO ISO 15829:2016 Road vehicles -- Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation
GSO ISO 3560:2015 Road vehicles -- Frontal fixed barrier or pole impact test procedure
BH GSO ISO 3560:2017 Road vehicles -- Frontal fixed barrier or pole impact test procedure

SPC GB/T 37337-2019 Protection of the occupants in the event of a lateral pole collision (TEXT OF DOCUMENT IS IN CHINESE)

EN 1317-3:2010 Road restraint systems - Part 3: Performance classes@ impact test acceptance criteria and test methods for crash cushions

KS R ISO 15829-2020 Road vehicles — Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation
KS R ISO 3560-2019 Road vehicles — Frontal fixed barrier or pole impact test procedure
KS C IEC 62262:2005 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts(IK code)

EN 1317-3:2000 Road restraint Systems - Part 3: Performance Classes, Impact Test Acceptance Criteria and Test Methods for Crash Cushions

SAE J2418-2003 Occupant Restraint System EvaluationFrontal Impact Component-Level Heavy Trucks
SAE J1766-2005 Recommended Practice for Electric and Hybrid Electric Vehicle Battery Systems Crash Integrity Testing
SAE J1766-1996 RECOMMENDED PRACTICE FOR ELECTRIC AND HYBRID ELECTRIC VEHICLE BATTERY SYSTEMS CRASH INTEGRITY TESTING
SAE J1766-1998 (R) Recommended Practice for Electric and Hybrid Electric Vehicle Battery Systems Crash Integrity Testing
SAE J1766-2014 Recommended Practice for Electric, Fuel Cell and Hybrid Electric Vehicle Crash Integrity Testing

SAE J2418-2020 Occupant Restraint Dynamic System Evaluation - Frontal Impact Heavy Trucks
SAE J2418-1998 Occupant Restraint System EvaluationFrontal Impact Component-Level Heavy Trucks
SAE J2418-2015 Occupant Restraint Dynamic System Evaluation - Frontal Impact Heavy Trucks

IEC 62262:2002 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)

ONORM EN 24015-1992 Hexagon head bolts - Reduced shank (Shank diameter = pitch diameter) - Product grade B

SNI 05-3063-1992 Hexagon head bolts - Product grade B, with shank diameter = pitch diameter