carbon unstable

carbon unstable, Total:153 items.

The international standard classification for "carbon unstable" includes: Carbon materials , Sugar and sugar products , Chemical analysis of metals , Optoelectronics. Laser equipment , Other equipment for petroleum and natural gas industries , Fruits and derived products , Protection against dangerous goods , Steel wire, wire ropes and link chains .

The Chinese standard classification for "carbon unstable" includes: Glass fibre , Sugar refining , Metallographic testing method , Laser device , Petroleum exploration, development, gathering and transportation engineering in general , Beverages in general , Marking, packaging, transport and storage in general , Basic standards and general methods , Steel wire and wire rope .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 7193.5-1987 Unsaturated polyester resin--Determination of heat stability at 80 Centigrade
GB/T 10304.7-1988 Determination of nonsolute for chloricacid in cathode carbonate
GB/T 14979-1994(英文版) Evaluation method for eutectic carbide inhomogeneity of steel
GB/T 18932.1-2002 Method for the determination of C-4 plant sugars in honey--Stable carbon isotope ratio mehtod
GB/T 13863-2011 Test methods for laser radiation power and its instability
GB/T 14979-1994 Eutectic carbide of steel - Micrographic method using Standard diagrams
GB/T 14979-1994e Eutectic carbide of steel—Micrographic method using standard diagrams
GB/T 31959-2015 Determination of thermal oxidative resistance of carbon fiber

Professional Standard - Petroleum

SY/T 6363-1998 Technical requirement for transient well testing

Group Standards of the People's Republic of China

T/LTIA 17-2022 Guidelines for the detection of genomic instability in human cells
T/CSTM 00509-2021 Hydrolysis resistant agent— 2,2′,6,6′-Tetraisopropyldiphenyl carbodiimide
T/NAIA 0208-2023 Determination of Stable Isotope Ratio of Carbon and Nitrogen in Lycium Barbarum by Stable Isotope Analyzer Method

Professional Standard - Light Industry

QB/T 4852-2015 Determination of the carbon isotope ratio(13C/12C)of CO2 in sparkling wines. Method using isotope ratio mass spectrometry

未注明发布机构

DIN 4084 E:2002-11 Soil - Calculation of embankment failure and overall stability of retaining structures
DIN 4084 E:2021-05 Soil - Calculation of embankment failure and overall stability of retaining structures

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34711-2017 Testing method for classification of chemically unstable gases

Professional Standard - Agriculture

241药典化学药和生物制品卷-2010 Chapter III Psychotropic Drugs IV. Mood Stabilizer Lithium Carbonate
SN/T 5035-2018 Method for the determination of carbon stable isotope ratio inalcoholic beverage ethanol for export - Gas chromatography-combustion - Isotope ratio mass spectrometer method (GC-C-IRMS)

国家质量监督检验检疫总局

SN/T 4675.3-2016 Dertermination of the stable carbon isotope ratio of ethanol in wine for export

交通运输部

JT/T 1190-2018 Technical regulations of oil fingerprint identification of water oil spill based on stable isotope analysis

海关总署

SN/T 4675.31-2019 Determination of carbon stable isotope ratio of glycerol in wine for expore LC-IRMS method

Professional Standard - Ferrous Metallurgy

YB/T 096-1997 High carbon chromium stainless steel wire High carbon chromium stainless steel wire
YB/T 096-2015 High carbon chromium stainless steel wires

国家能源局

NB/T 10068-2018 Specification for post weld heat treatment of stainless steel piping with stabilizing elementsOll

工业和信息化部

QB/T 5164-2017 Determination of the stable carbon isotope ratio C13C/12C of ethanol in Baijiu--Gas chromatography-combustion-isotope ratio mass spectrometry
QB/T 5299-2018 Determination of the 13C/12C isotope ratio of glycerol in wines. Method using liquid chromatography coupled to isotope ratio mass spectrometry
QB/T 5163-2017 Determination of the stable carbon isotope ratio(13C/12C ) of acetic acid in vinegar-Gas chromatography-combustion-isotope ratio mass spectrometry

GM Europe

GME QK 000198-1983 Polycarbonat -Formmasse, UV-stabilisiert Polycarbonate - Moulding Compounds, UV Stabilized

GM North America

GM GMP.ABS+PC.002-1989 ABS + Polycarbonate - Heat Stabilized
GM GMP.PC.008-2012 POLYCARBONATE - UV STABILIZED, INJECTION MOLDING GRADE (Issue 2; Do Not Use on New Programs; Replaced by GMW16728)
GM GMP.E/P.008-1992 Polyolefin Alloy - 32% Calcium Carbonate Filled, Heat Stabilized
GM GMP.PC.008-1999 Polycarbonate - UV Stabilized, Injection Molding Grade
GM GMP.ABS+PC.019-1999 ABS + PC - UV Stabilized, Impact Modified
GM GMP.PC+ S/MA.002-1988 Polycarbonate + Styrene Maleic Anhydride - Blend, Heat Stabilized
GM GMP.ABS+PC.010-1990 ABS + PC - High Impact, Heat Stabilized, Exterior Grade
GM GMP.PA66.079-2012 NYLON 66 - UV STABILIZED, HIGH IMPACT MODIFIED, HEAT STABILIZED (Issue 3; Do Not Use on New Programs; Replaced by GMW16558)
GMP.PVC.042-2011 PVC ?UV Stabilized, Heat Stabilized, Castable Powder Issue 3; Do Not Use on New Programs; Replaced by GMW16081
GMP.ABS+PC.002-2010 ABS+PC, Heat Stable, Injection Molded, Low UV Stable Issue 4; Do Not Use on New Programs; Replaced by GMW15581
GMP.ABS+PC.017-2010 ABS+PC, UV Stable, Heat Stable, Injection Molded Issue 4; Do Not Use on New Programs; Replaced by GMW15581
GM GMP.PA46.004-2000 Nylon 46 - 5% Stainless Steel Filled, Impact Modified , Heat Stabilized

RU-GOST R

GOST 28447.0-1990 Pneumotextured threads. Methods for the determination of structure and tensile strength instability
GOST R 51154-1998 Beer and beer beverages. Methods for determination of carbon dioxide and stability
GOST 18986.21-1978 Reference diodes and stabistors. Method for measuring time drift of working voltage
GOST 21316.5-1975 Photocells. Method of instability measurement
GOST 26490-1985 Soils. Determination of mobile sulfur by CINAO method
GOST 12790-1981 Beer. Methods of determination of carbonic oxideand stability
GOST 11612.11-1985 Photomultipliers. Measuring method of instability
GOST R 55332-2012 Milk and milk products. Methods for determination of free (destabilization) fat
GOST 27395-1987 Soils. Determination of mobile two-triwalent iron compounds after Verigina Arinushkina
GOST 31714-2012 Juices and juice products. Identification. Determination of stable carbon isotopes by mass-spectrometry method

Building Officials and Code Administrators International(U.S.)

BOCA CHAPTER 42 NFPC-1993 Unstable (Reactive) Materials
BOCA CHAPTER 42 NFPC COMM-1993 Unstable (Reactive) Chemicals
BOCA CHAPTER 42 NFPC-1999 Liquid and Solid Unstable (Reactive) Materials
BOCA CHAPTER 42 NFPC-1996 Liquid and Solid Unstable (Reactive) Materials

SE-SIS

SIS 18 41 22-1974 Paints. Determination of the mass volatile and non-volatile matter
SIS OK R 601 S and R 605 S 19/12/2.5 Stainless steel electrode for arc welding of chromium-nickel-molybdenum stabilized steel.

SCC

CAN/CGSB-53.138-M89-1989 Loose leaf, settled and unsettled
CAN/CGSB-53.138-1996 Loose leaf, settled and unsettled
CSA Z902-15:2015 Blood and labile blood products
AS C344:1963 Fixed carbon composition resistors. Type II - Normal stability
AWWA JAW23983 Journal AWWA — Ozone-Induced Particle Destabilization
AWWA JAW39523 Journal AWWA — Revenue Instability Induced by Conservation Rates
SAE AMSP46144A-2015 Plastic Sheet, Polycarbonate (Stabilized: Apr 2015)
SAE AMST5066B-2020 Tubing, Carbon Steel (1025) (Aircraft Quality) (Stabilized: Jul 2020)
SAE AMSQQW428/1B-2017 Wire, Steel, High Carbon, Round, Type I (Stabilized: Aug 2017)
SAE AMSP83310A-2016 Plastic Sheet, Polycarbonate, Transparent (Stabilized: Jul 2016)
DANSK DS/ISO 24185:2022 Evaluation of the uncertainty of measurements from a stationary autocorrelated process
SAE AMSQQW428B-2017 Wire, Steel, Carbon (High Carbon, Round, For Mechanical Springs, General Purpose) (Stabilized: Aug 2017)
IEC 60813:1985 Test method for evaluating the oxidation stability of hydrocarbon insulating liquids
SAE AMSC19853A-2021 Carbon Removing Compound (For Use in Agitated Tank) (Stabilized: May 2021)
SAE AMSQQW428/2B-2017 Wire, Steel, High Carbon, Round, Type III (Stabilized: Aug 2017)
AWWA JAW30318 Journal AWWA — A Mechanistic Study of Ozone-Induced Particle Destabilization
BS 642:1935 Carbide of calcium (graded sizes)
BS 642:1951 Calcium carbide (graded sizes)
SAE AS7205A-2024 Spring Pins, Tubular, Carbon Steel, Procurement Specification for (Stabilized: Apr 2024)
MIL MIL-T-25193B-1961 TRANSMITTER, REMOTE COMPASS, TYPE C-2 (UNSTABILIZED) (SUPERSEDING MIL-T-25193A)

Danish Standards Foundation

DS 236:1977 Water analysis. Stability with respect to calcium carbonate
DS/EN ISO 3908:2009 Hardmetals - Determination of insoluble (free) carbon - Gravimetric method

National Fire Protection Association (NFPA)

NFPA 1H PART 6 CHAPTER 72-2003 Unstable (Reactive) Solids and Liquids

ESDU - Engineering Sciences Data Unit

ESDU 82020 A-2001 Introduction to unsteady aerodynamics.
STRUCT 01.01.24 A-1976 The compressive instability of hydraulic jacks.
STRUCT 01.01.10 B-1978 Torsional instability of stringers and struts of angle section.
STRUCT 01.01.08 C-1990 Local instability of struts with flat sides.
ESDU 80010-1980 Local instability of truss core sandwich panels under longitudinal compression.

American National Standards Institute （ANSI)

ANSI/TIA/EIA 526-17-1993 Output Jitter Measurement
ANSI/TIA/EIA 526-15-1993 Jitter Tolerance Measurement
ANSI/TIA/EIA 526-16-1993 Jitter Transfer Function Measurement
ANSI/TIA/EIA 526-18-1993 Systematic Jitter Generation Measurement

U.S. Air Force

AIR FORCE MIL-T-8606 C-1973 TUBING, STEEL, CORROSION-RESISTANT (18-8 STABILIZED AND EXTRA LOW CARBON)
AIR FORCE MIL-T-8606 C (2)-1979 TUBING, STEEL, CORROSION-RESISTANT (18-8 STABILIZED AND EXTRA LOW CARBON)
AIR FORCE MIL-T-8606 C VALID NOTICE 4-2000 TUBING, STEEL, CORROSION-RESISTANT (18-8 STABILIZED AND EXTRA LOW CARBON)

Korean Agency for Technology and Standards (KATS)

KS B ISO TR 11332-2015 Hydrometric determination－Unstable channels and ephemeral streams
KS B ISO TR 11332-2003(2013) Hydrometric determination－Unstable channels and ephemeral streams
KS K 0261-2010 Tes method for labile sulfur in textile materials
KS K 0261-1985 Test method for labile sulfur in textile materials
KS K 0261-2018 Test method for labile sulfur in textile materials
KS B ISO TR 11332:2003 Hydrometric determination-Unstable channels and ephemeral streams
KS B ISO TR 11332:2015 Hydrometric determination－Unstable channels and ephemeral streams
KS D ISO 3908-2020 Hardmetals－Determination of insoluble(free) carbon－Gravimetric method
KS D ISO 3908-2010(2020) Hardmetals－Determination of insoluble(free) carbon－Gravimetric method

RO-ASRO

STAS 11576-1983 FLUXES FOR SOLDERING OF METALS Classification
STAS SR EN 23908-1995 Hardmetals. Determination of insoluble (free) carbon con-tent. Gravimetric method

International Telecommunication Union (ITU)

ITU-T Q.32 SPANISH-1988 REDUCTION OF THE RISK OF INSTABILITY BY SWITCHING MEANS
ITU-T Q.32 FRENCH-1988 REDUCTION OF THE RISK OF INSTABILITY BY SWITCHING MEANS
ITU-T Q.32-1988 REDUCTION OF THE RISK OF INSTABILITY BY SWITCHING MEANS
ITU-R TF.538-3-1994 Measures for Random Instabilities in Frequency and Time (Phase)
ITU-R TF.538-4-2017 Measures for random instabilities in frequency and time (phase)
ITU-R TF.538-3 FRENCH-1994 Measures for Random Instabilities in Frequency and Time (Phase)
ITU-R TF.538-3 SPANISH-1994 MEASURES FOR RANDOM INSTABILITIES IN FREQUENCY AND TIME (PHASE)

AT-ON

ONORM M 9810 Teil.8-1986 Stability of litt trucks; rough terrain fork litt trucks

German Institute for Standardization

DIN 4084:2009 Soil - Calculation of embankment failure and overall stability of retaining structures

SAE - SAE International

SAE AMS7440E-2016 Balls@ Steel@ Low-Chromium@ High Carbon Hardened and Tempered (Stabilzed Type)

TN-INNORPI

NT 19.13-1983 Leather. Determination of water and other unstable materials.
NT 19.14-1983 Leather. Determination of water and other unstable materials.

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JEP184-2021 Guideline for evaluating Bias Temperature Instability of Silicon Carbide Metal-Oxide-Semiconductor Devices for Power Electronic Conversion
JEDEC JESD90-2004 A Procedure for Measuring P-Channel MOSFET Negative Bias Temperature Instabilities
JEDEC JESD241-2015 Procedure for Wafer-Level DC Characterization of Bias Temperature Instabilities

ES-AENOR

UNE 48-088-1985 Determination of water-insoluble chlorinated carbon compounds
UNE 55-535-1989 Determination of stable anionic active neutral non-hydrolyzable substances in detergents

Association Francaise de Normalisation

NF A95-482*NF EN ISO 3908:2009 Hardmetals - Determination of insoluble (free) carbon - Gravimetric method
NF ISO 24185:2022 Evaluation of the measurement uncertainty of an autocorrelated stationary process
NF EN ISO 3908:2009 Métaux-durs - Dosage du carbone insoluble (libre) - Méthode gravimétrique

International Organization for Standardization (ISO)

ISO/TR 11332:1998 Hydrometric determinations - Unstable channels and ephemeral streams
ISO 24185:2022 Evaluation of the uncertainty of measurements from a stationary autocorrelated process
ISO 746:1976 Sodium carbonate for industrial use; Determination of matter insoluble in water at 50 degrees C

AENOR

UNE 48088:1985 DETERMINATION OF INSOLUBLE IN CARBON TETRACHLORIDE ("BREAK")

PL-PKN

PN C85047-1957 dye. Determination of the stability and colorfastness of iron and copper salts in dyeing baths
PN C85048-1957 dye. Determination of the stability and colorfastness of hexavalent chromium salts in dyeing baths

American Society for Testing and Materials (ASTM)

ASTM D6791-11(2017)e1 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
ASTM A923-08 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
ASTM A923-14 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
ASTM A923-06 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
ASTM A923-01 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels
ASTM D6605-00 Standard Practice for Determining the Color Stability of Hydrocarbon Resins After Heating
ASTM E476-87(2001) Standard Test Method for Thermal Instability of Confined Condensed Phase Systems (Confinement Test)

National Aeronautics and Space Administration (NASA)

NASA NACA-TM-1375-1954 On the three-dimensional instability of laminar boundary layers on concave walls
NASA NACA-TR-496-1935 General theory of aerodynamic instability and the mechanism of flutter

(U.S.) Ford Automotive Standards

FORD ESA-M1A64-A-2013 STEEL, STAINLESS (TITANIUM STABILIZED) MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A***

GB-REG

REG NASA-TR-R-30-1959 LOCAL INSTABILITY OF THE ELEMENTS OF A TRUSS-CORE SANDWICH PLATE

British Standards Institution (BSI)

BS ISO 24185:2022 Evaluation of the uncertainty of measurements from a stationary autocorrelated process

BE-NBN

NBN B 14-219-1983 Mortar testing, new mortar content, unsteady pressure method
NBN-EN 23908-1993 Hardmetals. Determination of insoluble (free) carbon content. Gravimetric method (ISO 3908: 1985)

European Committee for Standardization (CEN)

HD 486 S1-1987 Test method for evaluating the oxidation stability of hydrocarbon insulating liquids

CZ-CSN

CSN 50 0316-1966 Paper testing methods - Hydrostabilily i páper and board

YU-JUS

JUS N.R1.900-1980 Digital integrated circuits. Acceptance and reSability. Ekctrical tests
JUS N.R3.102-1981 Carbon film resistors, fixed, low power, high stability. Cl imat ic severities 55/125/56

GSO

GSO ISO 746:2016 Sodium carbonate for industrial use -- Determination of matter insoluble in water at 50 degrees C
OS GSO ISO 746:2016 Sodium carbonate for industrial use -- Determination of matter insoluble in water at 50 degrees C
BH GSO ISO 746:2017 Sodium carbonate for industrial use -- Determination of matter insoluble in water at 50 degrees C

Defense Logistics Agency

DLA MIL-S-55689 NOTICE 2-1999 SUPPRESSOR, ELECTRICAL TRANSIENT, MX-7778( )/GRC
DLA MIL-S-55689-1969 SUPPRESSOR, ELECTRICAL TRANSIENT, MX-7778( )/GRC
DLA MIL-S-55689 VALID NOTICE 1-1987 SUPPRESSOR, ELECTRICAL TRANSIENT, MX-7778( )/GRC

GM Global

GMW 16867-2012 Determine Permanent Growth Potential in Aluminum Due to Metallurgical Instability Issue 1; English