Accuracy in Analytical Methods

Accuracy in Analytical Methods, Total:369 items.

The international standard classification for "Accuracy in Analytical Methods" includes: Application of statistical methods , Salts , Physicochemical methods of analysis , Geology. Meteorology. Hydrology , Protection against dangerous goods , Chemical analysis , Metrology and measurement in general , Coals , Cement. Gypsum. Lime. Mortar , Medical Sciences and health care facilities in general , Water quality .

The Chinese standard classification for "Accuracy in Analytical Methods" includes: Mathematics , Light metals and their alloys analysis method , Electron optics and other physical optics instrument , Hydrogeological survey , Marking, packaging, transport and storage in general , Basic standards and general methods , Analysis and test methods for radioactive substances and radiation intensity , Measurement in general , Coal analysis methods , Cement , Metal physical property test method , Sanitation in general , Spacecraft power system .

Group Standards of the People's Republic of China

T/GDAQI 84-2022 Methodological comparison and evaluation of the accuracy of in vitro diagnostic reagents
T/CRES 0002-2018 Test Method for Solar Heliostat Tracking Accuracy
T/CSTM 00961-2022 Chemical composition quantitative analytical methods - General rules for evaluation of accuracy　（trueness and precision）compliance
T/JNM 0003-2024 Calibration Method of Oxygen in Hydrogen (Hydrogen in Oxygen) Analyzer

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 32495-2016 Surface chemical analysis—Secondary-ion mass spectrometry—Method for depth profiling of arsenic in silicon
GB/T 8158.7-1987 Methods for chemical analysis of sodium fluoride--The neutral titration for the determination of acidity
GB/T 6379.3-2012 Accuracy(trueness and precision) of measurement methods and results - Part 3：Intermediate measures of the precision of a standard measurement method
GB/T 43087-2023 Microbeam analysis—Analytical electron microscopy—Method for the determination of interface position in the cross-sectional image of the layered materials
GB/T 6379.1-2004 Accuracy(trueness and precision) of measurement methods and results - Part 1: General principles and definitions
GB/T 6379.4-2006 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method
GB/T 6379.6-2009 Accuracy(trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values
GB/T 6379.5-2006 Accuracy(trueness and precision) of measurement methods and results -Part 5: Alternative methods for the determination of the precision of a standard measurement method
GB/T 12375-1990 Analytical method of tritium in water
GB/T 11224-1989 Analytical method of thonium in water
GB/T 6379.2-2004 Accuracy (trueness and precision) ofmeasurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
GB/T 13072-1991 Method for measuring the activity ratios of 226Ra to 228Ra in geological water samples
GB/T 21780-2008 Partical size analysis - Sedimentation analysis in the gravitational field - Pipette method
GB/T 11225-1989 Analytical method of plutonium in water
GB/T 14502-1993 method of nickel-63 in water

Professional Standard - China Metal Association

CSM 01 01 01 06-2006 CSM 01 01 01 06-2006 Uncertainty assessment specification of measurement result of gas analysis method in iron，steel and alloy
CSM 01010106-2006 Specification for Uncertainty Evaluation of Measurement Results of Gas Analysis Methods in Iron, Steel and Alloys

Professional Standard - Agriculture

CNAS-GL006-2019 Guidence on Quantifying Uncertainty in Chemical Analysis

国家市场监督管理总局

RB/T 030-2020 Guidance of quantifying measurement uncertainty in chemical analysis

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34326-2017 Surface chemical analysis - Depth profiling - Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
GB/T 33303-2016 Guide for evaluation of measurement uncertainty in coal analysis

工业和信息化部

JC/T 1084-2019 Methods for chemical analysis of China ISO standard sand

Professional Standard - Building Materials

JC/T 1084-2008 Methods for chemical analysis of China ISO standard sand

Military Standard of the People's Republic of China-General Armament Department

GJB 6378-2008 Methods of spacecraft real-time orbit determination and analysis
GJB 1485-1992 Precision, accuracy and uncertainty of material physical property testing methods

Professional Standard - Non-ferrous Metal

YS/T 535.7-2009 Chemical analysis methods of sodium fluoride - Part 7: Determination of acidity - Neutral titration method
YS/T 535.7-2006 Sodium Fluoride Chemical Analysis Method for Determination of Acidity by Neutralization Method

农业农村部

NY/T 2887-2016 Guidelines for Validation of Pesticide Product Quality Analysis Methods

Professional Standard - Hygiene

WS/T 409-2013 Estimation of total analytical error for clinical laboratory methods

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40109-2021 Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth profiling of boron in silicon

Professional Standard - Energy

NB/Z 20326-2014 Analysis methodology for uncertainty of setpoints for instrumentation of safety system in nuclear power plants

Professional Standard - Aerospace

QJ 2838.1-1996 Analysis Method for Methyl Hydrazine Purity and Water - Methyl Hydrazine Purity (Potassium Iodate Method)

Professional Standard - Nuclear Industry

EJ/T 1047-1997 Analytical determination of tritium in urine
EJ/T 274-1987 Analysis method of plutonium in urine

Professional Standard - Environmental Protection

HJ 1126-2020 Analysis method for tritium in water

中华人民共和国环境保护部

GB 11225-1989 Analytical method of plutonium in water
GB 12375-1990 Analytical method of tritium in water

Shanxi Provincial Standard of the People's Republic of China

DB14/T 2797-2023 Specifications for confirmation of chemical analysis methods in testing laboratories

GSO

OS GSO ISO 5725-4:2010 Accuracy (trueness and precision) of measurement methods and results -- Part 4: Basic methods for the determination of the trueness of a standard measurement method
OS GSO ISO 5725-3:2010 Accuracy (trueness and precision) of measurement methods and results -- Part 3: Intermediate measures of the precision of a standard measurement method
GSO ISO 5725-3:2010 Accuracy (trueness and precision) of measurement methods and results -- Part 3: Intermediate measures of the precision of a standard measurement method
GSO ISO/TR 19319:2013 Surface chemical analysis -- Fundamental approaches to determination of lateral resolution and sharpness in beam-based methods
BH GSO ISO/TR 19319:2016 Surface chemical analysis -- Fundamental approaches to determination of lateral resolution and sharpness in beam-based methods
OS GSO ISO 5725-5:2010 Accuracy (trueness and precision) of measurement methods and results -- Part 5: Alternative methods for the determination of the precision of a standard measurement method
OS GSO ISO 5725-6:2010 Accuracy (trueness and precision) of measurement methods and results -- Part 6: Use in practice of accuracy values
OS GSO ISO 12406:2013 Surface chemical analysis -- Secondary-ion mass spectrometry -- Method for depth profiling of arsenic in silicon
BH GSO ISO 17560:2016 Surface chemical analysis -- Secondary-ion mass spectrometry -- Method for depth profiling of boron in silicon
OS GSO ISO 5725-1:2010 Accuracy (trueness and precision) of measurement methods and results -- Part 1: General principles and definitions
OS GSO ISO 8196-1:2014 Milk -- Definition and evaluation of the overall accuracy of alternative methods of milk analysis -- Part 1: Analytical attributes of alternative methods
GSO ISO 8196-1:2014 Milk -- Definition and evaluation of the overall accuracy of alternative methods of milk analysis -- Part 1: Analytical attributes of alternative methods
GSO ISO 13322-2:2013 Particle size analysis -- Image analysis methods -- Part 2: Dynamic image analysis methods
BH GSO ISO 13322-1:2016 Particle size analysis -- Image analysis methods -- Part 1: Static image analysis methods
BH GSO ISO 13322-2:2016 Particle size analysis -- Image analysis methods -- Part 2: Dynamic image analysis methods
BH GSO ISO 6143:2016 Gas analysis -- Comparison methods for determining and checking the composition of calibration gas mixtures
OS GSO ISO 13322-1:2013 Particle size analysis -- Image analysis methods -- Part 1: Static image analysis methods
OS GSO ISO 13322-2:2013 Particle size analysis -- Image analysis methods -- Part 2: Dynamic image analysis methods
GSO ISO 13322-1:2013 Particle size analysis -- Image analysis methods -- Part 1: Static image analysis methods
GSO ISO 6143:2013 Gas analysis -- Comparison methods for determining and checking the composition of calibration gas mixtures
NB/T 20326-2014 Analysis Method of Uncertainty of Instrument Trigger Setting Values in Nuclear Power Plant Safety System
GSO ISO 5725-5:2010 Accuracy (trueness and precision) of measurement methods and results -- Part 5: Alternative methods for the determination of the precision of a standard measurement method

Danish Standards Foundation

DS/ISO 5725-6/Corr. 1:2010 Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values
DS/ISO 5725-3/Corr.1:2002 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method
DS/ISO 5725-5/Corr. 1:2005 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
DS/ISO 5725-5:2000 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
DS/ISO 5725-3:1995 Accuracy (trueness and precision) of measurement methods and results- Part 3: Intermediate measures of the precision of a standard measurement method
DS/ISO 5725-2/Corr.1:2002 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
DS/ISO 5725-6:1995 Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values
DS/ISO 5725-1/Cor.1:2000 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions
DS/CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
DS 260:1978 Water analysis. Aluminium in water. Photometric method
DS/ISO/TR 22971:2005 Accuracy (trueness and precision) of measurement methods and results - Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results
DS/EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
DS/ISO 5725-4:1995 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method

British Standards Institution (BSI)

BS ISO 5725-3:1994(2002) Accuracy (trueness and precision) of measurement methods and results — Part 3 : Intermediate measures of the precision of a standard measurement method
BS ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results - Basic methods for the determination of the trueness of a standard measurement method
BS ISO 5725-4:1995 Accuracy (trueness and precision) of measurement methods and results - Basic methods for the determination of the trueness of a standard measurement method
BS ISO 5725-3:1995 Accuracy (trueness and precision) of measurement methods and results. Intermediate measures of the precision of a standard measurement method
BS ISO 5725-2:2019 Accuracy (trueness and precision) of measurement methods and results - Basic method for the determination of repeatability and reproducibility of a standard measurement method
PD ISO/TR 19319:2013 Surface chemical analysis. Fundamental approaches to determination of lateral resolution and sharpness in beam-based methods
BS ISO 8196-1:2009 Milk - Definition and evaluation of the overall accuracy of alternative methods of milk analysis - Analytical attributes of alternative methods
BS ISO 16531:2020 Surface chemical analysis. Depth profiling. Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
BS ISO 12787:2012 Cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques
22/30329297 DC BS ISO 5725-1. Accuracy (trueness and precision) of measurement methods and results - Part 1. General principles and definitions
24/30477549 DC BS ISO 5725-5 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
19/30399949 DC BS ISO 16531. Surface chemical analysis. Depth profiling. Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
BS ISO 5725-6:1994(2002) Accuracy (trueness and precision) of measurement methods and results — Part 6 : Use in practice of accuracy values
15/30291643 DC BS ISO 18516. Surface chemical analysis. Determination of lateral resolution and sharpness in beam based methods
BS ISO 13322-2:2021 Particle size analysis. Image analysis methods. Dynamic image analysis methods
BS ISO 8196-3:2009 Milk - Definition and evaluation of the overall accuracy of alternative methods of milk analysis - Protocol for the evaluation and validation of alternative quantitative methods of milk analysis
BS ISO 13322-1:2005 Particle size analysis - Image analysis methods - Static image analysis methods
BS ISO 13322-1:2014 Particle size analysis. Image analysis methods. Static image analysis methods
22/30380920 DC BS ISO 5725-3. Accuracy (trueness and precision) of measurement methods and results - Part 3. Intermediate precision and alternative designs for collaborative studies
24/30497177 DC BS ISO 5725-2 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
BS ISO 20263:2017 Microbeam analysis. Analytical electron microscopy. Method for the determination of interface position in the cross-sectional image of the layered materials
BS ISO 5725-6:1994 Accuracy (trueness and precision) of measurement methods and results. Use in practice of accuracy values
BS EN ISO 6143:2006(2007) Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
BS 4289-8:1988 Methods for analysis of oilseeds - Check of the calibration of moisture meters
BS PD CEN/TR 10350:2009 Analysis of steels and irons — Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
BS ISO 5725-5:1998 Accuracy (trueness and precision) of measurement methods and results - Alternative methods for the determination of the precision of a standard measurement method
BS 1748-8:1960 Methods for the analysis of copper alloys - Method for the determination of phosphorus in copper alloys (photometric method)

Korean Agency for Technology and Standards (KATS)

KS A ISO 5725-3-2022 Accuracy(trueness and precision) of measurement methods and results－Part 3：lntermediate measures of the precision of a standard measurement method
KS A ISO 5725-4:2021 Accuracy(trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method
KS A ISO 5725-5-2022 Accuracy(trueness and precision) of measurement methods and results－Part 5：Alternative methods for the determination of the precision of a standard measurement method
KS H ISO 8196-1:2021 Milk — Definition and evaluation of the overall accuracy of indirect methods of milk analysis —Part 1: Analytical attributes of indirect methods
KS A ISO 5725-1-2022 Accuracy(trueness and precision) of measurement methods and results－Part 1：General principles and definitions
KS A ISO 5725-3-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 3：lntermediate measures of the precision of a standard measurement method
KS A ISO 5725-4-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 4：Basic methods for the determination of the trueness of a standard measurement method
KS A ISO 5725-5-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 5：Alternative methods for the determination of the precision of a standard measurement method
KS D ISO 1053:2012 Zinc－Determination of copper content?Spectrophotometric method
KS A ISO 5725-6-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 6：Use in practice of accuracy values
KS A ISO 5725-4:2012 Accuracy(trueness and precision) of measurement methods and results-Part 4:Basic methods for the determination of the trueness of a standard measurement method
KS B 0822-1992 Standard test method for determination of aggregates impacting value ? Method of test FOR CHEMICAL ANALYSIS
KS A ISO 5725-2-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 2：Basic method for the determination of repeatability and reproducibility of a standard measurement method
KS H ISO 8196-1:2006 Milk－Definition and evaluation of the overallaccuracy of indirect methods of milk analysis－Part 1：Analytical attributes of indirect methods
KS H ISO 8196-1-2006(2016) Milk -- Definition and evaluation of the overall accuracy of indirect methods of milk analysis - Part 1: Analytical attributes of indirect methods
KS H ISO 8196-1-2023 Milk — Definition and evaluation of the overall accuracy of alternative methods of milk analysis — Part 1: Analytical attributes of alternative method
KS M 2105-2005 Methods of measuring dust concentration in flue gas
KS Q ISO 11056-2014(2019) Sensory analysis — Methodology — Magnitude estimation method

German Institute for Standardization

DIN ISO 5725-3:2003-02 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method (ISO 5725-3:1994 including Technical Corrigendum 1:2001)
DIN ISO 5725-5:2002-11 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method (ISO 5725-5:1998)
DIN ISO 5725-4:2003 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method (ISO 5725-4:1994)
DIN ISO 5725-3:2003 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method (ISO 5725-3:1994 including Technical Corrigendum 1:2001)
DIN ISO 5725-5:2002 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method (ISO 5725-5:1998)
DIN 66111 Beiblatt 1:1989 Particle size analysis; sedimention analysis; principles; evaluation equations for determination of quantities in the field of centrifugal force
DIN 66111 Beiblatt 1:1989-02 Particle size analysis; sedimention analysis; principles; evaluation equations for determination of quantities in the field of centrifugal force
DIN ISO 5725-5 Berichtigung 1:2006 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method (ISO 5725-5:1998), Corrigenda to DIN ISO 5725-5:2002-11 (ISO 5725-5:1998/Cor. 1:2005
DIN ISO 5725-6:2002-08 Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values (ISO 5725-6:1994 including Technical Corrigendum 1:2001)
DIN ISO 5725-6:2002 Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values (ISO 5725-6:1994 including Technical Corrigendum 1:2001)
DIN ISO 5725-2:2020 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:2019); Text in German and English
DIN ISO 5725-2:2022-05 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
DIN ISO 5725-1 Berichtigung 1:1998-09 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions
DIN ISO 5725-1:1997-11 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions (ISO 5725-1:1994)
DIN ISO 5725-2:2002 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:1994 including Technical Corrigendum 1:2002)
DIN EN ISO 6143:2006-11 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001); German version EN ISO 6143:2006

Association Francaise de Normalisation

NF ISO 5725-4:2020 Accuracy (trueness and precision) of measurement results and methods - Part 4: basic methods for determining the accuracy of a standardized measurement method
NF X06-041-4*NF ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results - Part 4 : basic methods for the determination of the trueness of a standard measurement method
NF X06-041-5*NF ISO 5725-5:1998 Application statistics - Accuracy (trueness and precision) of measurement methods and results - Part 5 : alternative methods for the determination of the precision of a standard measurement methods.
NF X06-041-2*NF ISO 5725-2:2020 Accuracy (trueness and precision) of measurement methods and results - Part 2 : basic method for the determination of repeatability and reproducibility of a standard measurement method
NF ISO 5725-2:2020 Accuracy (trueness and precision) of measurement results and methods - Part 2: basic method for determining the repeatability and reproducibility of a standardized measurement method
NF V03-110:2010 Analysis of agricultural and food products - Characterization protocol for the validation of a quantitative analysis method by construction of the accuracy profile
NF T75-612*NF ISO 12787:2012 Cosmetics - Analytical methods - Validation criteria for analytical results using chromatographic techniques
FD A06-500*FD CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
NF ISO 17560:2006 Chemical analysis of surfaces - Mass spectrometry of secondary ions - Determination of boron in silicon by thickness profiling
NF V03-110:1998 Analysis of agri-foodstuffs. Intralaboratory validation procedure for an alternative method compared to ? reference method. Case of quantitative analysis methods.
NF ISO 8196-1:2009 Milk - Definition and evaluation of the overall precision of alternative milk analysis methods - Part 1: analytical attributes of alternative methods

VN-TCVN

TCVN 6910-3-2001 Accuracy (Trueness and precision) of measurement methods and results.Part 3: Intermediate measures of the precision of a standard measurement method
TCVN 6910-4-2001 Accuracy (trueness and precision) of measurement methods and results.Part 4: Basic methods for the determination of the trueness of a standard measurement method
TCVN 6910-5-2002 Accuracy (trueness and precision) of measurement methods and results.Part 5: Alternative methods for the determination of the precision of a standard measurement method
TCVN 6910-6-2002 Accuracy (trueness and precision) of measurement methods and results.Part 6: Use in practice of accuracy values
TCVN 6910-2-2001 Accuracy (trueness and precision) of measurement methods and results.Part 2: Basic methos for the determination of repeatability and reproducibility of a standard measurement method
TCVN 6910-1-2001 Accuracy (trueness and precision) of measurement methods and results.Part 1: General principles and definitions

IT-UNI

UNI ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method
UNI ISO 5725-2:2020 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

KR-KS

KS A ISO 5725-4-2021 Accuracy(trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method
KS A ISO 5725-6-2023 Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values
KS H ISO 8196-1-2021 Milk — Definition and evaluation of the overall accuracy of indirect methods of milk analysis —Part 1: Analytical attributes of indirect methods
KS K ISO 7211-3-2015 Textiles — Woven fabrics — Construction — Methods of analysis — Part 3: Determination of crimp of yarn in fabric

SCC

DANSK DS/ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results – Part 4: Basic methods for the determination of the trueness of a standard measurement method
BS ISO 5725-4:1994 Accuracy (trueness and precision) of measurement methods and results-Basic methods for the determination of the trueness of a standard measurement method
DANSK DS/ISO 5725-2:2019 Accuracy (trueness and precision) of measurement methods and results – Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
AWWA QTC98245 Analysis of Metals by Inductively Coupled Plasma-Mass Spectrometry: Effect of Concentration on Accuracy and Precision
DANSK DS/ISO 5725-6:1995 Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values
DANSK DS/ISO 5725-5:2000 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
BS PD ISO/TR 19319:2013 Surface chemical analysis. Fundamental approaches to determination of lateral resolution and sharpness in beam-based methods
DANSK DS/ISO 5725-3:1995 Accuracy (trueness and precision) of measurement methods and results – Part 3: Intermediate measures of the precision of a standard measurement method
BS 1121-32:1954 Methods for the analysis of iron and steel. Tunsten in steel (absorptiometric method)
07/30162536 DC BS ISO 8196-1. Milk. Definition and evaluation of the overall accuracy of alternative methods of milk analysis. Part 1. Analytical attributes of alternative methods
BS 1121-48:1966 Methods for the analysis of iron and steel. Molybdenum in iron, steel Photometric
BS 1121-45:1966 Methods for the analysis of iron and steel. Phosphorus in iron and steel Photometric
VDI 2449 BLATT 3-2001 Test criteria for measurement procedures — General method for determining the uncertainty of calibrated measurement procedures
BS 1121-36:1956 Methods for the analysis of iron and steel. Copper in iron and steel (absorptiometric method)
AWWA WQTC57118 Determination of Fluence Rate Distribution in UV Reactors Using Spherical Actinometry and Mathematical Analysis Approaches
VDI 2449 BLATT 3-2001 Test criteria for measurement procedures — General method for determining the uncertainty of calibrated measurement procedures
BS 1121-23:1951 Methods for the analysis of iron and steel. Manganese in iron and steel (absorptiometric method)
BS 1121-30:1954 Methods for the analysis of iron and steel. Cobalt in iron and steel (absorptiometric method)
BS 1121-34:1955 Methods for the analysis of iron and steel. Molybdenum in iron and steel (absorptiometric method)
BS 1121-24:1967 Methods for the analysis of iron and steel. Manganese in iron and steel (absorptiometric method)
DANSK DS/ISO 13322-1:2014 Particle size analysis - Image analysis methods - Static image analysis methods
BS 1121-24:1952 Methods for the analysis of iron and steel. Small amounts of chromium in irion and steel (absorptiometric method)
AASHTO T 88-2019 Standard Method of Test for Particle Size Analysis of Soils
DANSK DS/CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
AWPA A46-20 Standard Method for Determining MCS Concentration in EL2 Treatment Solution Samples by Turbidity Measurement
AASHTO T 88-2013(2017) Standard Method of Test for Particle Size Analysis of Soils
AASHTO T 88-2022 Standard Method of Test for Particle Size Analysis of Soils
AASHTO T 88-2000(2004) Standard Method of Test for Particle Size Analysis of Soils
BS PD CEN/TR 10350:2013 Analysis of steels and irons. Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
DANSK DS/ISO 13322-2:2021 Particle size analysis – Image analysis methods – Part 2: Dynamic image analysis methods
AWWA WQTC64116 Analytical Method Development for Minimizing Uncertainty in Cryptosporidium and Microsphere Enumeration from Large Water Volumes
07/30162549 DC BS ISO 8196-3. Milk. Definition and evaluation of the overall accuracy of alternative methods of milk analysis. Part 3. Protocol for the evaluation and validation of alternative quantitative methods of milk analysis
VDI/VDE/DGQ/DKD 2622 BLATT 2-2021 Calibrating measuring equipment for electrical quantities - methods for determining measurement uncertainty
VDI 4009 BLATT 10-1986 Analytical methods of error detection for reliability assurance
12/30241146 DC BS ISO 16531. Surface chemical analysis. Depth profiling. Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
DIN ISO 5725-2 E:2020 Draft Document - Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:2019); Text in German and English
DANSK DS/EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
BS ISO 6143:2001 Gas analysis. Comparison methods for determining and checking the composition of calibration gas mixtures
SN-CEN/TR 10350:2013 Analysis of steels and irons — Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
SN-CEN/TR 10350:2009 Analysis of steels and irons — Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
AWPA A91-12 Standard Method for Determination of Iodine and Chlorine in Wood Using Neutron Activation Analysis
AWPA A91-24 Standard Method for Determination of Iodine and Chlorine in Wood Using Neutron Activation Analysis
AWPA A46-14 Standard Method for Determining MCS Stabilizer Concentration in EL2 Treatment Solution Samples by Turbidity Measurement
BS 1121-47:1966 Methods for the analysis of iron and steel. Titanium in iron, steel and permanent magnet alloys Photometric
DANSK DS/ISO 19430:2016 Particle size analysis – Particle tracking analysis (PTA) method
AWPA A91-18 Standard Method for Determination of Iodine and Chlorine in Wood Using Neutron Activation Analysis

International Organization for Standardization (ISO)

ISO/AWI 5725-5 Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
ISO/CD 5725-5:2023 Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
ISO 5725-3:1994 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method
ISO 5725-4:1994 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method
ISO 5725-5:1998 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
ISO 5725-3:1994/cor 1:2001 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method; Technical Corrigendum 1
ISO 5725-6:1994 Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO 5725-5:1998/cor 1:2005 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method; Technical Corrigendum 1
ISO 12787:2011 Cosmetics - Analytical methods - Validation criteria for analytical results using chromatographic techniques
ISO 5725-6:1994/cor 1:2001 Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values; Technical Corrigendum 1
ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method
ISO 5725-1:2023 Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
ISO 8196-1:2000 Milk - Definition and evaluation of the overall accuracy of indirect methods of milk analysis - Part 1: Analytical attributes of indirect methods
ISO 16531:2020 Surface chemical analysis — Depth profiling — Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
ISO 8196-1:2009 Milk - Definition and evaluation of the overall accuracy of alternative methods of milk analysis - Part 1: Analytical attributes of alternative methods
ISO 8196-1:2009|IDF 128-1:2009 Definition and evaluation of the overall accuracy of mutation methods for cow milk analysis Part 1: Analytical characteristics of mutation methods
ISO 8196-3:2022 Milk — Definition and evaluation of the overall accuracy of alternative methods of milk analysis — Part 3: Protocol for the evaluation and validation of alternative quantitative methods of milk analys
ISO 17560:2014 Surface chemical analysis — Secondary-ion mass spectrometry — Method for depth profiling of boron in silicon
ISO 5725-1:1994 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions
ISO 8196-1:2009 | IDF 128-1:2009 Milk — Definition and evaluation of the overall accuracy of alternative methods of milk analysis — Part 1: Analytical attributes of alternative methods
ISO/CD 20263:2023 Microbeam analysis — Analytical electron microscopy — Method for the determination of interface position in the cross-sectional image of the layered materials
ISO 13322-2:2021 Particle size analysis — Image analysis methods — Part 2: Dynamic image analysis methods
ISO/CD 6143 Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures
ISO 5725-2:1994/cor 1:2002 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method; Technical Corrigendum 1
ISO/DIS 6143:2023 Gas analysis — Comparison methods for determining and checking the composition of calibration gas mixtures

RU-GOST R

GOST R ISO 5725-4-2002 Accuracy (trueness and precision) of measurement methods and results. Part 4. Basic methods for the determination of the trueness of a standard measurement method
GOST R ISO 5725-6-2002 Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values
GOST R ISO 5725-2-2002 Accuracy (trueness and precision) of measurement methods and results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method
GOST R ISO 5725-5-2002 Accuracy (trueness and precision) of measurement methods and results. Part 5. Alternative methods for the determination of the precision of a standard measurement method
GOST 27981.5-2015 Copper of high purity. Methods of photometric analysis
GOST 30159-1994 Wood chemical products. Provision of accuracy for testing methods

Spanish Association for Standardization (UNE)

UNE 82009-6:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 6: USE IN PRACTICE OF ACCURACY VALUES.
UNE 22-147-1990 Iron minerals. Determination of moisture absorption in analytical samples. Gravimetry
UNE 82009-5:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 5: ALTERNATIVE METHODS FOR THE DETERMINATION OF THE PRECISION OF A STANDARD MEASUREMENT METHOD.
UNE 82009-3:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 3: INTERMEDIATE MEASURES OF THE PRECISION OF A STANDARD MEASUREMENT METHOD.
UNE 36-331 Pt.1-1989 Chemical analysis of materials in the steel industry. Determination of niobium in steel. Spectrophotometry
UNE 82009-4:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 4: BASIC METHODS FOR THE DETERMINATION OF THE TRUENESS OF A STANDARD MEASUREMENT METHOD.
UNE 36-317 Pt.1-1985 Determination of nitrogen in steel. Spectrophotometry
UNE 82009-2:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 2: BASIC METHOD FOR THE DETERMINATION OF REPEATABILITY AND REPRODUCIBILITY OF A STANDARD MEASUREMENT METHOD.
UNE 36-315 Pt.1-1991 Chemical analysis of materials in the steel industry. Determination of sulfur in steel and cast iron. Spectrophotometry
UNE 77035:1983 WATER ANALYSIS METHODS IN INDUSTRIAL WASTES. DETERMINATION OF ACIDITY
UNE 36-317 Pt.2-1989 Chemical analysis of materials in the steel industry. Determination of nitrogen (design) content in steel. Spectrophotometry
UNE 77247:2003 Gas analysis -- Comparison methods for determining and checking the composition of calibration gas mixtures.

GOSTR

GOST R 58946-2020 System of ensuring geometrical parameters accuracy in construction. Statistical analysis of accuracy
GOST 8.662-2018 State system for ensuring the uniformity of measurements. Dissolved hydrogen analyzers. Calibration methods

American Welding Society (AWS)

WRC 564:2020 The MPC Lot-Centered Analysis Method for Determining High Temperature Strength Parameters

American Society for Testing and Materials (ASTM)

ASTM E1545-11(2016) Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
ASTM E1545-22 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
ASTM D3173-03(2008) Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
ASTM RR-E37-1014 1994 E1545-Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
ASTM E2549-14 Standard Practice for Validation of Seized-Drug Analytical Methods
ASTM D4822-88(2008) Standard Guide for Selection of Methods of Particle Size Analysis of Fluvial Sediments (Manual Methods)
ASTM RR-E37-1015 1994 E1640-Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM E2008-99 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM D7482-08 Standard Practice for Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis
ASTM E2808-21a Standard Guide for Microspectrophotometry in Forensic Paint Analysis
ASTM E3406-24 Standard Guide for Microspectrophotometry in Forensic Fiber Analysis
ASTM D5542-04(2009) Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
ASTM E2808-19e1 Standard Guide for Microspectrophotometry in Forensic Paint Analysis
ASTM D422-63(2007) Standard Test Method for Particle-Size Analysis of Soils
ASTM E180-99 Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial and Specialty Chemicals
ASTM D422-63(2007)e2 Standard Test Method for Particle-Size Analysis of Soils
ASTM E2808-19 Standard Guide for Microspectrophotometry in Forensic Paint Analysis
ASTM E2808-21 Standard Guide for Microspectrophotometry in Forensic Paint Analysis
ASTM E2038-99 Standard Test Method for Temperature Calibration of Dielectric Analyzers
ASTM D4422-19 Standard Test Method for Ash in Analysis of Petroleum Coke
ASTM D4422-13 Standard Test Method for Ash in Analysis of Petroleum Coke
ASTM E2038-99(2004) Standard Test Method for Temperature Calibration of Dielectric Analyzers
ASTM E112-96e2 Standard Test Methods for Determining Average Grain Size
ASTM E1582-21 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM E885-88(1996) Standard Test Methods for Analyses of Metals in Refuse-Derived Fuel by Atomic Absorption Spectroscopy
ASTM C1156-03 Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials
ASTM E112-13(2021) Standard Test Methods for Determining Average Grain Size
ASTM E885-88(2004) Standard Test Methods for Analyses of Metals in Refuse-Derived Fuel by Atomic Absorption Spectroscopy
ASTM D4422-03(2008) Standard Test Method for Ash in Analysis of Petroleum Coke
ASTM C1156-03(2011) Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials
ASTM E1363-18 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E1582-17 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM E1363-16 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E1363-23 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E1363-03 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM D6426-18 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils
ASTM D5713-00 Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography
ASTM D4422-03 Standard Test Method for Ash in Analysis of Petroleum Coke
ASTM E1363-13 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E2808-11 Standard Guide for Microspectrophotometry and Color Measurement in Forensic Paint Analysis
ASTM RR-E37-1017 1996 E1582-Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM D6034-17 Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test
ASTM E1363-08 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM RR-E37-1007 1984 E1582-Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM D4483-99 Standard Practice for Determining Precision for Test Method Standards in the Rubber and Carbon Black Industries
ASTM D5263-08 Standard Test Method for Determining the Relative Degree of Oxidation in Bituminous Coal by Alkali Extraction
ASTM E2040-08 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E1867-22 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E2113-02 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM E1363-97e1 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E1867-97 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM RR-E37-1011 1990 E1363-Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E1867-18 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E2567-16a(2023) Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis
ASTM D5713-09 Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography
ASTM E2567-12a Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis
ASTM E346-24 Standard Test Method for Analysis of Carbonizables in Methanol
ASTM D5713-05 Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography
ASTM E611-08 Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography
ASTM E2040-99 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2040-08(2014) Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E1867-16 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM E2040-03 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E1867-01 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
ASTM D4483-05a(2011) Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries

Society of Automotive Engineers (SAE)

SAE ARP4252-1989 Instrumental Methods of Determining Surface Cleanliness R(1995)

HU-MSZT

MSZ 14141/47-1981 Methods for measuring accuracy characteristics of metal plate machines. location accuracy
MSZ 14141/5-1979 The metal plate of the machine. Accuracy measurement method. straightness

DIN

DIN ISO 5725-2:2022 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:2019); Text in German and English

VDI - Verein Deutscher Ingenieure

VDI 2449 Blatt 3-1999 Pruefkriterien von Messverfahren - Allgemeine Methode zur Ermittlung der Unsicherheit kalibrierfaehiger Messverfahren
VDI 4009 Blatt 10-1985 Analytische Methoden der Fehlererkennung zur Zuverlaessigkeitssicherung
VDI/VDE/DGQ/DKD 2622 BLATT 2-2013 Kalibrieren von Messmitteln fuer elektrische Groessen - Methoden zur Ermittlung der Messunsicherheit

European Committee for Standardization (CEN)

PD CEN/TR 10350:2009 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
PD CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials

South African Bureau of Standard

SANS 5725-3:2009 Accuracy (trueness and precision) of measurement methods and results Part 3: Intermediate measures of the precision of a standard measurement method
SANS 5725-5:2009 Accuracy (trueness and precision) of measurement methods and results Part 5: Alternative methods for the determination of the precision of a standard measurement method
SANS 5725-6:2009 Accuracy (trueness and precision) of measurement methods and results Part 6: Use in practice of accuracy values
SANS 5725-4:2009 Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method

Japanese Industrial Standards Committee (JISC)

JIS Z 8402-5:2002 Accuracy (trueness and precision) of measurement methods and results -- Part 5: Alternative methods for the determination of the precision of a standard measurement method
JIS K 0164:2023 Surface chemical analysis -- Secondary-ion mass spectrometry -- Method for depth profiling of boron in silicon
JIS K 1800:1978 Analytical methods for trace of impurities in high purity ethylene
JIS Z 8829:2021 Particle size analysis -- Particle tracking analysis (PTA) method

Compressed Gas Association (U.S.)

CGA M-6-2007 GUIDELINE FOR ANALYTICAL METHOD VALIDATION FIRST EDITION

Standard Association of Australia （SAA）

AS 1050.27:1971 Methods for the analysis of iron and steel, Part 27: Titanium in steel (spectrophotometric method)
AS K1.17:1961 Methods for the analysis of iron and steel, Part 17: Copper in iron and steel (absorptiometric method)
AS 1696.1:1974 Methods for the analysis of copper, Part 1: Phosphorus in copper (Spectrophotometric Method)
AS K1.7:1968 Methods for the analysis of iron and steel, Part 7: Method for the determination of chromium in iron and steel: photometric
AS 2850:1986 Chemical analysis - Interlaboratory test programs - For determining precision of analytical method(s) - Guide to the planning and conduct
AS K1.22:1965 Methods for the analysis of iron and steel, Part 22: Cobalt in iron and steel (Photometric method for trace amounts)
AS K1.21:1965 Methods for the sampling and analysis of iron and steel, Part 21: Cobalt in iron and steel (photometric method)
AS K1.7:1956 Methods for the analysis of iron and steel, Part 7: Small amounts of chromium in iron and steel (Absorptiometric method)
AS 1050.31:1981 Methods for the analysis of iron and steel, Part 31: Determination of niobium in steel (spectrophotometric method)
AS K1.24:1968 Methods for the sampling and analysis of iron and steel, Part 24: Method for the determination of aluminium in iron and steel (photometric method)
AS K1.8:1956 Methods for the analysis of iron and steel, Part 8: The determination of manganese in iron and steel (Absorptiometric method)
AS 1050.26:1978 Methods for the analysis of iron and steel, Part 26: Determination of silicon in iron and steel (spectrophotometric method)
AS K1.6:1956 Methods for the analysis of iron and steel, Part 6: The determination of manganese in iron and steel (absorptiometric method)
AS 1050.27:1984 Methods for the analysis of iron and steel, Part 27: Determination of titanium in iron and steel (spectrophotometric method)

The American Road & Transportation Builders Association

AASHTO T 88-2013 Standard Method of Test for Particle Size Analysis of Soils
AASHTO T 88-2020 Standard Method of Test for Particle Size Analysis of Soils
AASHTO T 88-2010 Standard Method of Test for Particle Size Analysis of Soils
AASHTO T 30-2008 Standard Method of Test for Mechanical Analysis of Extracted Aggregate

AASHTO - American Association of State Highway and Transportation Officials

T 88-2010 Standard Method of Test for Particle Size Analysis of Soils
T 88-2013 Standard Method of Test for Particle Size Analysis of Soils
T88-1993 Standard Method of Test for Particle Size Analysis of Soils
T 88-2000 Standard Method of Test Particle Size Analysis of Soils

Lithuanian Standards Office

LST ISO 5725-3+AC1:2007 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method (identical ISO 5725-3:1994 including technical corrigendum ISO 5725-3:1994/Cor.1:2001)
LST ISO 5725-2+AC1:2006 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (identical ISO 5725-2:1994 including technical corrigendum ISO 5725:1994/
LST ISO 5725-1+AC:2002 Accuracy (trueness and precision) of measurement methods and results. Part 1: General principles and definitions (identical ISO 5725-1:1994)

Canadian General Standards Board （CGSB)

CAN/CGSB-4.2 NO.1-M87-1987 Textile Test Methods Precision and Accuracy of Measurements

BELST

STB 1923-2008 System of ensuring geometrical рarameters accuracy in construction. Statistical analysis of accuracy

International Telecommunication Union (ITU)

ITU-R S.1554 FRENCH-2002 Methodology for determining the overall accuracy of epfd downlink measurements
ITU-R S.1554 SPANISH-2002 Methodology for determining the overall accuracy of epfd downlink measurements

AR-IRAM

IRAM 7506-1959 How to determine width in fabric

YU-JUS

JUS B.G8.056-1982 Methods of analysh ofiron ore?. Experimental methods for checking theprecision of sampling