polycarbonate polymer

polycarbonate polymer, Total:169 items.

The international standard classification for "polycarbonate polymer" includes: Raw materials for rubber and plastics , Elements of buildings , Films and sheets , Thermoplastic materials , Agricultural machines, implements and equipment , Surface active agents , Rubber and plastics products in general .

The Chinese standard classification for "polycarbonate polymer" includes: Synthetic resin and plastic , Plastic components and accessorie , Basic standards and general methods for synthetic resin and plastic , Daily use plastic products , Farming and foresting machinery and tools , Chemical additive .

Professional Standard - Chemical Industry

HG/T 2503-1993 Specification for polycarbonate resins by melt method

工业和信息化部

HG/T 2503-2022 Polycarbonate resin

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 31124-2014 Poly propylene carbonate(PPC)

Taiwan Provincial Standard of the People's Republic of China

CNS 13629-1996 Polycarbonate Moulding Materials
CNS 11335-1995 Polycarbonate Sheets

Group Standards of the People's Republic of China

T/SHPTA 087-2024 Glass fiber reinforced polycarbonate plastic particles
T/HBTL 011-2020 Polyurethane/Polyacrylate Latex Interpenetrating Network Polymer Emulsion
T/HZAS 19-2021 Determination of Phenolic Compounds in Polycarbonate Materials by Gas Chromatography-Mass Spectrometry
T/CSHX 0002-2022 Nanoscale Calcium carbonate for polyurethane adhesive
T/JSBIA 003-2021 Seaiing cover of drinking water tank
T/CSRA 22-2023 Bisphenol A as recycled-content product from polycarbonate resin production
T/JSBIA 002-2021 Polycarbonate (PC) drinking water tank
T/FSNZ 12-2021 Polycarbonate (PC) board production technical regulations
T/ZZB 0233-2017 Recycled polycarbonate resin
T/CPCIF 0080-2020 By-product sodium chloride of polycarbonate

Professional Standard - Construction Industry

JG/T 347-2012 Polycarbonate Solid Sheet
JG/T 116-2012 Polycarbonate Multiwall Sheet

未注明发布机构

SAE AMS-P-83310A-1998 Plastic Sheet@ Polycarbonate@ Transparent

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35516-2017 Light diffusion polycarbonate for LED luminaire
GB/T 35450-2017 Polycarbonate film and sheet
GB/T 33897-2017 Biopolyester―Polyhydroxyalkanoates(PHA) blowing film

Professional Standard - Light Industry

QB 2460-1999 Polycarbonate (PC) Drinking Water Tank
QB/T 2460-1999 Polycarbonate (PC) drinking water tank

Professional Standard - Machinery

JB/T 12423-2015 Polycarbonate (PC) films used for electrical insulation

Professional Standard - Agriculture

NY/T 1362-2007 Polycarbonate Hollow Sheet for Greenhouse

Shanghai Provincial Standard of the People's Republic of China

DB31/ 45-1990 Polycarbonate resin for food packaging
DB31/ 189-1997 Polycarbonate bottle for purified water packaging

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 36792-2018 Flame retardant chemical—Brominated polycarbonate
GB/T 41000-2021 General requirement of polycarbonate (PC) drinking water pitcher

SCC

HOLDEN HN 1978-2012 Moulding Compound - Polycarbonate Polyester Alloys
HOLDEN HN 1978-2004 MOULDING COMPOUND - POLYCARBONATE POLYESTER ALLOYS
SAE AMSP46144-2000 Plastic Sheet, Polycarbonate
HOLDEN HN 1647-2008 PAINT SYSTEMS FOR EXTERIOR POLYCARBONATE ALLOYS
HOLDEN HN 1598-2012 ABS/Polycarbonate Moulding Compounds
ASD-STAN prEN 3779:1970 Polycarbonate sheet - Dimensions
HOLDEN HN 1598-2006 ABS/Polycarbonate Moulding Compounds
SAE AMSP83310-1998 Plastic Sheet, Polycarbonate, Transparent
MIL MIL-I-10903-1951 ISOBUTYL METHACRYLATE POLYMER, AE

GM Europe

GME QK 000171-2005 Polycarbonat Polycarbonate English/German
GME QK 000187-2005 Polycarbonat Polycarbonate English/German
GME QK 000168-2005 Polycarbonat Polycarbonate English/German
GME QK 000640-1998 Polycarbonat-Polybutylenterephthalat-Blend Polycarbonate Polybutylene Terephthalate Blend English/German
GME QK 000634-1996 Polycarbonat-Polybutylenterephthalat - Blend Polycarbonate Polybutylenterephthalate Blend English/German
GME QK 000694-1998 Mixture of polyetherimide and polycarbonate English/German
GME QK 000194-2009 Blend of Polycarbonate (PC) and Polybuthylene Terephthalate (PBT) (English/German)
GME QK 000170-2005 Blend from PC and PBT (English/German)
GME QK 001902-2004 Blend from PC and PBT Blend from PC and PBT English/German
GME QK 000654-2004 Blend of polycarbonate (PC) and polytetrafluoroethylene (PTFE) English/German
GME QK 000245-2010 High Temperature-Polycarbonate-Copolymers (Issue 1; English/German)
GME QK 000714-2010 Mixtures of polycarbonate and polyethylene terephthalate with mineral materials English/German. 1st edition
GME QK 000230-1996 ASA + PC - Blend ASA + PC - Blend English/German
GME QK 000198-1983 Polycarbonat -Formmasse, UV-stabilisiert Polycarbonate - Moulding Compounds, UV Stabilized
GME QK 000218-2005 Polycarbonate (English/German)
GME QK 001906-2003 Polycarbonat Polycarbonate English/German
GME QK 001906-2009 Polycarbonat Polycarbonate English/German
GME QK 000177-2005 Polycarbonate (English/German)
GME QK 000168-2007 PolycarbonateEnglish/German
GME QK 000175-2004 Polycarbonate (English/German)
GME QK 000244-2009 PolycarbonateEnglish/German
GME QK 000187-2007 PolycarbonateEnglish/German
GME QK 000198-2007 PolycarbonateEnglish/German
GME QK 000060-2009 PolycarbonateEnglish/German
GME QK 000171-2007 Polycarbonate (English/German)
GME QK 000195-1997 (PC + ABS) - Blend (PC + ABS) - Blend English/German
GME QK 000227-1997 (PC + ABS) - Blend (PC + ABS) - Blend English/German
GME QK 000230-2010 ASA + PC - Blend (Issue 3; English/German)
GME QK 001955-2003 Blend from ABS and PC Blend from ABS and PC English/German
GME QK 000216-2005 Blend from ABS and PC (English/German)
GME QK 001961-2005 Blend from ABS and PC Blend from ABS and PC English/German
GME QK 000195-2010 Blend from PC and ABS (English/German)
GME QK 000188-2003 Blend from PC and ABS Blend from PC and ABS English/German
GME QK 000208-1983 Polycarbonat-Formmase, modifiziert Polycarbonate Moulding Compounds, Modified German
GME QK 000228-1987 ABS/PC - Blend mit Glasfasern ABS/PC - Blend with Glass Fibres German
GME STD 518654-1994 Plastic 8654 ASA+PC Plast 8654 ASA+PC English/Swedish
GME QK 000231-1997 (PC + ABS) - Blend (PC + ABS) - Blend English/German [Replaced: GME QK 000215]
GME QK 006100-1984 Filled polycarbonate material German
GME QK 000185-1983 Polycarbonat - Formmasse niederer Schmelzviskosit鋞 Polycarbonate - Moulding Compound Low Melting Viscosity German

GM North America

GM GMP.ABS+PC.003-1992 ABS + Polycarbonate - Alloy
GM GMP.ABS+PC.009-1991 ABS + Polycarbonate - High Impact Blend
GM 9986047-1995 Polyurethane Isocyanate, Low Density Polymer
GM GM6059M-1986 Polycarbonate Plastics
GM GMP.PC+PBT.008-2000 PC+PBT - Impact Modified, Alloy
GM GMP.PC+PBTP.001-1994 PC + PBTP - Impact Modified, Weatherable, Alloy
GM GMP.PC.011-1990 Polycarbonate - High Viscosity
GM GMP.ABS+PC.016-1993 ABS + PC - 8% Mineral Filled
GM GMP.PC+PETP.005R-1998 PC+PET Alloy - Recycled, Heat Stabilized
GM GMP.PC+PBT.009-1999 PC+PBT - Blow Moldable, Impact Modified Alloy
GM GMP.PEI+PPC.002-2002 Polyetherimide + Polycarbonate Ester - Medium Heat Resistance
GM GMP.ABS+PC.002-1989 ABS + Polycarbonate - Heat Stabilized
GM GMP.PC+ S/MA.001-1988 Polycarbonate + Styrene Maleic Anhydride - General Purpose, Blend
GM GMP.PC.009-1998 Polycarbonate - Exterior Lens
GM GMP.PC.001-1999 Polycarbonate - General Purpose, Colorable
GM GMP.ABS+PC.011-1991 ABS + Polycarbonate - Heat Resistant, Black
GM GMP.PC+ S/MA.002-1988 Polycarbonate + Styrene Maleic Anhydride - Blend, Heat Stabilized
GM GMP.PC+PETP.007-1999 PC+PETP - 20% Glass Filled
GM GMP.PC.003-1989 Polycarbonate - High Heat, Impact Modified
GM GMP.PC+PBTP.003-1988 Polycarbonate + Poly (Butylene Terephthalate) - 10% Glass Fiber Reinforced, Impact Modified, Alloy
GM 9985574-1994 Adhesive, Urethane, Polymer
GM GMP.PC.004-1989 Polycarbonate - Medium Heat, Impact Modified
GM GMP.ABS+PC.008-1990 ABS + PC - High Heat, High Impact Blend
GM 9985573-1994 Adhesive, Urethane, Polymer
GM GMP.PC+PBT.006-2002 PC + PBT, 11 % - GFR, EPDM Modified, Weatherable
GM GMP.ABS+PC.013-1992 ABS + PC - Blow Molding Grade
GM GMP.PC.015-1997 Polycarbonate - Low Viscosity, Colorable
GM GMP.PBT.009-1998 PBT - 30% Glass Fiber Reinforced, Polycarbonate Modified
GM GMP.ABS+PC.015R-1998 ABS + PC - 8% Mineral Filled, Painted Regrind
GM GMP.PC+PBTP.005-1995 PC + PBTP - Impact Modified, Paintable, Polyester Alloy Do Not Use on New Drawings; Scheduled for Deletion; Replaced by GMP.PC+PBTP.008
GM GMP.PP.102-1999 Polypropylene - 33% Calcium Carbonate Filled, Homopolymer
GM GMP.PBT.031R-1999 PBT - Recycled, 30% Glass Fiber Reinforced, Polycarbonate Modified (Revision A)

TH-TISI

TIS 1348-1996 Polycarbonate
TIS 655.2-2011 Plastic utensils for food.part 2: poly (vinyl chloride) polycarbonate polyamide and poly (methyl methacrylate)

GM Daewoo

GMKOREA EDS-M-4644-2012 Acrylonitrile Butadiene Styrene Copolymer / Polycarbonate Blend (III)
GMKOREA EDS-M-5751-2014 Polycarbonate and polybutylene terephthalate blend (Version 11; English/Korean)
GMKOREA EDS-M-5302-2006 High heat-resistant polycarbonate
GMKOREA EDS-M-5761-2014 Polycarbonate, polybutylene terephthalate, and acrylonitrile butadiene styrene copolymer blend (Version 6; English/Korean)
GMKOREA EDS-M-5762-2014 Blow molded polycarbonate, polybutylene terephthalate, and acrylonitrile butadiene styrene copolymer blend (Version 4; English/Korean)
GMKOREA EDS-M-5763-2014 10% talc-filled blend of polycarbonate and polybutylene terephthalate (Version 2; English/Korean)
GMKOREA EDS-M-4642-2012 Acrylonitrile Butadiene Styrene Copolymer / Polycarbonate Blend for Metal Plating

SE-SIS

SIS 16 44 11-1970 Polycarbonate injection moulding and extrusion compounds
SIS 16 44 20-1970 Polycarbonate injection moulding and extrusion compounds. General information
SIS 16 67 11-1968 Polyester moulding compounds (alkyd moulding compounds)

Indonesia Standards

SNI 03-4515-1998 Polycarbonate sheet for roof

Society of Automotive Engineers (SAE)

SAE AMS-P-46144A-2015 Plastic Sheet, Polycarbonate
SAE AMS3611B-1969 PLASTIC SHEET Polycarbonate
SAE AMS3611A-1966 PLASTIC SHEET Polycarbonate
SAE AMS3611-1964 PLASTIC SHEET Polycarbonate
SAE AMS3611E-2011 Plastic Sheet, Polycarbonate, General Purpose
SAE AMS3611D-2003 Plastic Sheet, Polycarbonate General Purpose
SAE AMS3101-1998 Adhesion Promoter for Polysulfide Sealants, Non-Crazing of Acrylic and Polycarbonate
SAE AMS3101B-2011 Adhesion Promotoer for Polysulfide Sealants, Non-crazing of Acrylic and Polycarbonate
SAE AMS-P-83310-1998 Plastic Sheet, Polycarbonate, Transparent
SAE AMS3510A-1993 COATING, ABRASION RESISTANT For Polycarbonate Parts
SAE AMS3611D-1994 Plastic Sheet, Polycarbonate General Purpose
SAE AMS3510-1995 COATING, ABRASION RESISTANT For Polycarbonate Parts
SAE AMS3510B-1993 Coating, Abrasion Resistant for Polycarbonate Parts
SAE AMS3611C-2011 PLASTIC SHEET, POLYCARBONATE General Purpose

(U.S.) Ford Automotive Standards

FORD ESB-M4D442-A-1983 POLYCARBONATE, POLYBUTYLENE TEREPHTHALATE MOLDING COMPOUND
FORD SJ-M98D9610-A-1994 POLYCARBONATE FILM, TRANSLUCENT
FORD WSB-M4D650-A-2005 THERMOPLASTIC POLYURETHANE/POLYCARBONATE (TPU+PC) BLEND MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D718-A4-2010 POLYCARBONATE + POLYBUTYLENE THEREPHTALATE (PC+PBT) BLEND FILM, TRANSLUCENT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4D650-A-2009 THERMOPLASTIC POLYURETHANE/POLYCARBONATE (TPU+PC) BLEND MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D775-A1-2014 POLYCARBONATE (PC), MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D879-A3-2010 POLYCARBONATE + POLYETHYLENE TEREPHTHALATE BLEND (PC + PET) MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M4D442-A3-1986 PC/PBT ALLOY, RUBBER MODIFIED MOLDING COMPOUND - PAINTABLE
FORD WSB-M4D928-A1-2006 POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC +PBT), MODIFIED MOLDING COMPOUND, RECYCLATE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1053-A1-2014 POLYCARBONATE (PC) COPOLYMER, HIGH HEAT RESISTANCE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D858-A-2010 POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC+PBT), MODIFIED MOLDING COMPOUND, RECYCLATE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D1053-A1-2010 POLYCARBONATE COPOLYMER, HIGH HEAT RESISTANCE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4D928-A1-2010 POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC+PBT), MODIFIED MOLDING COMPOUND, RECYCLATE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D762-A2-2014 POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC+PBT), MODIFIED MOLDING COMPOUND, HIGH IMPACT PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***

Japanese Industrial Standards Committee (JISC)

JIS K 6719:1994 Polycarbonate moulding materials

Korean Agency for Technology and Standards (KATS)

KS M 3153-1997 POLYCARBONATE MOULDING MATERIALS
KS M 3153-1982 POLYCARBONATE MOULDING MATERIALS

RO-ASRO

STAS E 12471-1986 Plastics POLYCARBONATE Coding

SAE - SAE International

SAE AMS-P-83310A-2016 Plastic Sheet@ Polycarbonate@ Transparent
SAE AMS3510B-1995 COATING@ ABRASION RESISTANT FOR POLYCARBONATE PARTS

RU-GOST R

GOST R 56712-2015 Panel multilayer polycarbonate. Specifications
GOST 28843-1990 Polyurethane thread spandex. Test methods

American Society for Testing and Materials (ASTM)

ASTM F997-10 Standard Specification for Polycarbonate Resin for Medical Applications
ASTM D2615-70(1976)e1 Method of Free Toluene Diisocyanate in Urethane Polymers by Distillation
ASTM F997-98a Standard Specification for Polycarbonate Resin for Medical Applications
ASTM F997-98ae1 Standard Specification for Polycarbonate Resin for Medical Applications

U.S. Military Regulations and Norms

ARMY MIL-G-48090 A VALID NOTICE 2-2003 GROMMETS, POLYCARBONATE (FOR SEPARATE LOADED PROJECTILE)
ARMY MIL-G-48090 A-1988 GROMMETS, POLYCARBONATE (FOR SEPARATE LOADED PROJECTILE)
ARMY MIL-G-48090 A (1)-1991 GROMMETS, POLYCARBONATE (FOR SEPARATE LOADED PROJECTILE)
ARMY MIL-G-48090 A NOTICE 1-1998 GROMMETS, POLYCARBONATE (FOR SEPARATE LOADED PROJECTILE)

GM Global

GMW 15582-2013 Acrylonitrile Butadiene Styrene and Polycarbonate Blend, Filled Issue 2; English

Defense Logistics Agency

DLA MIL-DTL-43511 D-2006 VISORS, FLYER'S HELMET, POLYCARBONATE

Association Francaise de Normalisation

NF F12-445:1988 Rolling stock. Light diffusers made of polycarbonate.