Styrene liquid phase detection

Styrene liquid phase detection, Total:405 items.

The international standard classification for "Styrene liquid phase detection" includes: Raw materials for rubber and plastics , Plastics , Thermoplastic materials , Latex and raw rubber , Rubber , Road construction materials , Ambient atmospheres , Adhesives , Surface active agents , Plastics in general , Aromatic hydrocarbons , Workplace atmospheres , Cosmetics. Toiletries , Protection against crime , Occupational safety. Industrial hygiene , Animal feeding stuffs , Essential oils .

The Chinese standard classification for "Styrene liquid phase detection" includes: Basic standards and general methods , Synthetic resin and plastic , Basic standards and general methods for synthetic resin and plastic , Basic Subject in general , Synthetic materials in general , Synthetic rubber , Basic standard and general method for synthetic rubber , Road material , Analysis methods for toxic substances in atmosphere , Rubber products in general , Adhesives , Basic standards and general methods for chemical additive , Organic chemicals in general , Papermaking in general , Basic organic chemicals , Labor sanitation , Cosmetics , Crime judging technology , Basic standards and general methods , Livestock and poultry feed and additive , Plastic profile , Fragrances and flavors .

Professional Standard - Commodity Inspection

SN/T 4113-2015 Determination of acetophenon in plastic and plastic products-High performance liquid chromatography
SN/T 5244-2020 Import and export textile processing detergent-Determination of alkylphenols and alkylphenol polyethoxylates-High performance liquid chromatography method
SN/T 4471-2016 Inspection rules for import and export dangerous chemical products - Styrene
SN/T 1850.1-2006 Determination of alkylphenols and alkylphenol polyethoxylates in textiles-Part 1:High performance liquid chromatography method
SN/T 1752-2006 Inspection of stilbenes residues in food of animal origin for import and export-Liquid chromatography mass spectrometry method
SN/T 4156-2015 Determination of divinyl benzene in the imported and exported polystyrene poke-Gas chromatography-mass spectrometry
SN 0625.2-1997 Inspection rules of imported plastic scrap as raw material. Polymer scrap of ethylene|| styrene|| vinyl chloride respective and others
SN/T 2451-2010 Determination of Sodium Nifurstyrenate Residues in Food of Animal Origin - LC-MS/MS Method
SN/T 3716-2013 Determination of nonyl phenol and nonylphenoxy polyethoxy ethanol in electrical and electronic products
SN/T 1850.3-2010 Determination of alkylphenols and alkylphenol polyethoxylates in textiles—Part 3:NP-HPLC and LC-MS/MS methods
SN/T 2889-2011 Food contact materials for export. Polymers. Determination of toluene|| ethylbenzene|| propylbenzene|| isopropylbenzene|| styrene and total volatile substances in polystyrene. Gas chromatography method

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 8661-2008 Plastics - Styrene/acrylonitrile copolymers - Determination of residual acrylonitrile monomer content - Gas chromatography method
SPC GB/T 37388-2019 Solution-polymerized styrene butadiene rubber (SSBR) (TEXT OF DOCUMENT IS IN CHINESE)
GB/T 14670-1993 Air quality－Determination of styrene－Gas chromatography
GB/T 8656-1998 Styrene-butadiene rubber(SBR)-Emulsion and solution - Polymerized types-Evaluation procedures
GB/T 14677-1993 Air quality. Determination of toluene, dimethyl benzene and styrene. Gas chromatography
GB/T 16054-1995 Workplace air--Determination of styrene--Thermal desorption gas chromatographic method
GB/T 8655-2006 Styrene - butadiene rubber (SBR) 1500
GB/T 38286-2019 Polyethylene(PE),polypropylene(PP)and polystyrene(PS)resin—Determination of peroxide value
GB 3915-1998 Styrene for industrial use
GB/T 45464-2025 Test method for modifier content of SBS modified asphalt for road engineering
GB/T 23972-2009 Determination of alkylphenols and alkylphenol polyethoxylates in textile dyeing and finishing auxiliaries—LC/MS method
GB/T 43778-2024 Determination of styrene and 2-chloroethanol in cell culture medium—Gas chromatography-mass spectrometry (GC-MS）
GB/T 12688.9-2011 Test method of styrene for industrial use—Part 9:Determination of trace benzene—Gas chromatographic method
GB/T 3915-2021 Styrene for industrial use
GB/T 3915-2011 Styrene for industrial use
GB/T 12688.1-1998 Styrene for industrial use-Determinaiton of purity-Gas chromotographic method
GB/T 44790-2024 Nanotechnologies—Detection method for solid phase extraction performance of polystyrene nanofibers
GB/T 39998-2021 Paper, board and paper products—Determination of alkylphenol polyethoxylates—HPLC-MS method
GB/T 8658-1998 Rubber, raw styrene-butadiene, emulsion - Polymerized - Determination of bound styrene content-Refractive index method
GB/T 16052-1995 Workplace air―Determination of styrene―Direct injection gas chromatographic method
GB/T 38271-2019 Plastics—Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I)—Gas chromatography
GB/T 9353-1988 Determination of residual styrene monomer in Acrylonitrile-Butadiene-Styrene(ABS) resin by gas chromatography
GB/T 12824-2002 Rubberm,styrene-butadiene (SBR) 1502
GB/T 16053-1995 Workplace air--Determination of styrene--Solvent desorption gas chromatographic method
GB/T 29613.2-2014 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 2:Determination of styrene/butadiene/isoprene ratio
GB/T 28728-2012 Determination of the microstructure of solution-polymerized SBR
GB/T 37388-2019 Solution-polymerized styrene butadiene rubber(SSBR)
GB 12671-1990 Polystyrene resin
GB/T 4614-1984 Determination of residual styrene monomer in polystyrene by gas chromatography
GB/T 37641-2019 Determination of 2,3,5,4'-tetrahydroxystilbene-O-β-D-glucoside in cosmetics―High performance liquid chromatography
GB/T 8656-2018 Emulsion-and solution-polymerized styrene-butadiene rubber(SBR)—Evaluation procedures
GB/T 27561-2011 Styrene-butadiene-styrene block copolymers(SBS) adhesives
GB/T 8658-2025 Rubber, raw styrene-butadiene, emulsion-polymerized—Determination of bound styrene content—Refractive index method
GB/T 16867-1997 Determination of residual styrene monomer in polystyrene and acrylonitrile-Butadiene-Styrene resins by gas chromatography

Professional Standard - Public Safety Standards

GA/T 204-2019 Forensic sciences—Examination method for benzene,toluene,ethylbenzene and dimethyl benzene in blood and urine—HSGC
GA/T 1927-2021 Forensic sciences-Examination methods for 7 phenylethylamines including 4-ethyl-2,5-dimethoxyphenethylamine in suspected drugs- LC and LC-MS

Group Standards of the People's Republic of China

T/CPPIA 6-2021 Determination of Hexabromocyclododecane in Expanded Polystyrene and Extruded Polystyrene--Gas Chromatography-Mass Spectrometry
T/GZPPIA 01-2018 Polystyrene buoyancy
T/SDSES 028-2023 Sodium p-styrenesulfonate by-product sodium bromide aqueous solution
T/SDAS 791-2024 Recycling styrene
T/CBPIA 0009-2025 Polystyrene-divinylbenzene cross-linked resin for peptide solid phase synthesis
T/NAIA 0273-2023 divinylbenzene
T/ZZB 2752-2022 Styrene for polymerization-specificatioan
T/JTAIT 10-2021 Infrared spectroscopic method for rapid detection of polyethylene, polypropylene, polystyrene, polyvinyl chloride, ethylene-vinyl acetate copolymer and polyethylene terephthalate in plastic products
T/NBSL 002-2022 Flame Retardant ABS
T/ZZB 1652-2020 Disposable serological pipettes（Polystyrene）
T/SDSES 005-2023 Sodium p-styrenesulfonate by-product sodium bromide aqueous solution
T/CSRA 21-2022 Determination of plastic composition—Qualitative method of PE,PP,PS,PVC,EVA,PET in plastics
T/SDEPI 013-2021 α-methyl styrene which recycled from phenol of residual liquid
T/CAMDI 004-2016 Acrylonitrile-butadiene-styrene copolymer (ABS) special material for infusion and blood transfusion equipment
T/CIPR 064-2022 Styrene-ethylene-ethylene-propylene block copolymer modified foam

Professional Standard - Petrochemical Industry

SH/T 1819-2018 Determination of residual styrene in carboxyl styrene-butadiene rubber latex-Capillary-column gas chromatography
SH/T 1051-1991 Designation of Styrene-Butadiene Series Impact Polystyrene (SB) Molding and Extrusion Materials
SH/T 1590-1994 Styrene-butadiene series impact-resistant polystyrene (SB) resin
SH/T 1485.2-1995 Determination for each component content in industrial divinylbenzene - Gas chromatography method
SH 1590-1994 Anti-impact resin of styrene-butadiene series
SH 1051-1991 Designation of Styrene-Butadiene Series Impact Polystyrene (SB) Molding and Extrusion Materials
SH/T 1502-1992 Determination for bound styrene content in styrene butadiene latex
SH/T 1485.1-1995 Industrial divinylbenzene
SH/T 1626-2005 Rubber styrene-butadiene(SBR)1712
SH/T 1848-2025 Determination of residual styrene monomer content in styrene-butadiene rubber—Gas chromatography-mass spectrometry method

Taiwan Provincial Standard of the People's Republic of China

CNS 13159-1995 Method of Test for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipes for Water Works
CNS 3637-1980 Phenyl Ethylene (Styrene) Monomer
CNS 3894-1975 Method of Test for Styrene Monomer
CNS 11337-1985 Acrylonitrile-Butadiene-Styrene (ABS) Sheets
CNS 4013-1976 Method of Test for Polystyrene Moulding Materials
CNS 10351-1983 Method of Test for Synthetic Rubber Sbr
CNS 11338-1985 Method of Test for Acrylonitrile-Butadiene-Styrene Sheets
CNS 11286-1985 Method of Test for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Plastics
CNS 2536-1992 Method of Test for Thermal Insulation Material Made of Polystyrene Foam
CNS 10350-1983 Method of Test for Synthetic Rubber Sbr Latex

Professional Standard - Hygiene

WS/T 54-1996 Urine - Determination of phenylglyoxylic acid and mandelic adid - High performance liquid chromatographic method

Professional Standard - Chemical Industry

HG/T 4999-2016 Tristyrylphenol ethoxylates
HG/T 4998~4999-2016 Oleic acid ethoxylates and tristyrylphenol ethoxylates (2016)
HG/T 6011-2022 Powered styrene-butadiene rubber

Military Standard of the People's Republic of China-General Armament Department

GJB 4782A-2020 Determination of Benzene Chloroacetophenone by High Performance Liquid Chromatography
GJB 533.28-1988 Detection methods for 45 components of submarine cabin air. Determination of benzene, toluene, ethylbenzene, xylene, and 1,2-dichloroethane content by gas chromatography.
GJB 4782-1997*GJBz 20414-1997 Determination of Benzene Chloroacetophenone by High Performance Liquid Chromatography

National Health Commission of the People's Republic of China

GBZ/T 300.68-2017 Determination of toxic substances in workplace air—Part 68: Styrene, methylstyrene and divinyl benzene

Professional Standard - Agriculture

NY/T 3140-2017 Determination of phenylethanolamine A in feeds- High performance liquid chromatography
JAP-163 Ethoxyfen detection method
NY/T 4305-2023 Determination of 2,6-dimethoxy-4-vinylphenol in vegetable oils-High performance liquid chromatography

Fujian Provincial Standard of the People's Republic of China

DB35/T 1817-2019 Determination of Benzene, Vinyl Chloride and Oxygenated Organic Compounds in Liquid Carbon Dioxide by Gas Chromatography

Guangxi Provincial Standard of the People's Republic of China

DB45/T 1013-2014 Determination of Phenylethanolamine A in Urine by Liquid Chromatography-Mass Spectrometry/Mass Spectrometry

Sichuan Provincial Standard of the People's Republic of China

DB51/T 1175-2010 Determination of phenylethanolamine A in feed by high performance liquid chromatography

Agricultural Standard of the People's Republic of China

农业部1879号公告-1-2012 Determination of phenylethanolamine A in animal urine.Liquid chromatography-tandem mass spectrometry

Liaoning Provincial Standard of the People's Republic of China

DB21/T 2836-2017 Method for rapid on-site testing of molded polystyrene foam for weight gain insulation with aqueous penetrant

Professional Standard - Light Industry

QB/T 4216-2011 Allyl phenoxyacetate
QB/T 2029-1994 ABS/PVC Sheet Material

Gosstandart of Russia

GOST 35015-2023 Products made of polystyrene, styrene copolymers and rubber-latex compositions. Determination of acetophenone in aqueous extracts by gas chromatography..
GOST 34945-2023 Polystyrene and styrene copolymer products. Determination of butadiene in air and water environments
GOST 15820-1982 Polystyrole and copolymers of styrole. Gas chromatographic method for determination of resictual monomers and non-polymerizing impurities
GOST R 54551-2011 Rubber styrene-butadiene. Determination of bound styrene content. Refractive index method
GOST 24654-1981 Synthetic rubbers. Method for determination of bound styrene content and alpha-methylstyrene
GOST 22019-1985 Synthetic rubbers. Method for determination of free styrene and alpha-methyl styrene
GOST ISO 2322-2013 Styrene-butadiene rubber (SBR) emulsion- and solution- polymerized types. Evaluation methods
GOST ISO 2322-2018 Emulsion- and solution-polymerized styrene-butadiene rubber (SBR). Evaluation procedures
GOST 10003-1990 Styrene. Specifications
GOST 23492-1983 Synthetic rubbers, butadiene-styrene SKS-30ARKPN and butadiene-methylstyrene SKMS-30ARKPN. Specifications
GOST 23492-2019 Butadiene-methylstyrene SKMS-30ARKPN and butadiene-styrene SKS-30ARKPN rubbers. Specifications
GOST 12998-1985 Polystyrene film. Specifications

Türk Standardları Enstitüsü

TS 340-1966 PLASTICS DETERMINATION OF THE PERCENTAGE OF STYRENE ?N POLYSTYRENE WITH WIJS SOLUTION
TS 2610-1977 STYRENE - BUTEDIEN COPOLYMERS - DETERMINATION OF BOUND STYRENE CONTENT
TS 2492-1977 PLASTICS DETERMINATION OF RESIDUAL STYRENE MONOMER ?N POLYSTYRENE BY GAS CHROMATOGRAPHY
TS 3486-1980 ?RAW STYRENE — BUTADIENE RUBBER (SBR) — DETERMINATION OF SOAP CONTENT-
TS 3247-1978 Sanayide Kullan?lan Stiren
TS 3487-1980 RAW STYRENE BUTADIENE RUBBER (SBR) — DETERMINATION OF VOLATILE MATTER

Swedish Institute for Standards

SIS 16 66 02-1966 Polystyrene. Determination of the percentage of styrene with Wijs solution
SS-ISO 2453:2001 Rubber, raw styren-butadiene, emulsion-polymerized - Determination of bound styrene content - Refractive index method
SIS SS-ISO 2561:1987 Plastics - Determination of residual styrene monomer in polystyrene by gas chromatography
SS-EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile (ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
SS-ISO 2561:2013 Plastics - Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography (ISO 2561:2012, IDT)
SS-EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
SS-EN ISO 6402-1:2001 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificati...
SS-EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificati...
SS-ISO 21561:2005 Styrene-butadiene rubber (SBR) - Determination of the microstructure of solution-polymerized SBR (ISO 21561:2005, IDT)
SIS 16 66 60-1966 Styrene moulding and extrusion compounds. General information

International Organization for Standardization (ISO)

ISO/R 173:1961 Withdrawal of ISO/R 173-1961
ISO/DIS 2561:1975 Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO/FDIS 2561:2023 Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO 2561:2012 Plastics - Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO 2561:1974 Plastics; Determination of residual styrene monomer in polystyrene by gas chromatography
ISO 2561:2006 Plastics - Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO/PRF 3136 Rubber latex — Styrene-butadiene — Determination of bound styrene content
ISO 2453:1975 Styrene-butadiene copolymers — Determination of bound styrene content
ISO 3136:2023 Rubber latex — Styrene-butadiene — Determination of bound styrene content
ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
ISO/PRF 7382 Ethylene for industrial use — Sampling in the liquid and the gaseous phase
ISO 7382:1986 Ethylene for industrial use; Sampling in the liquid and the gaseous phase
ISO 7382:2023 Ethylene for industrial use — Sampling in the liquid and the gaseous phase
ISO 2453:2020 Rubber, raw styrene-butadiene, emulsion-polymerized — Determination of bound styrene content — Refractive index method
ISO 2322:2014 Styrene-butadiene rubber (SBR) - Emulsion- and solution-polymerized types - Evaluation procedures
ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 24048:2022 Plastics — Determination of bound acrylonitrile content in the continuous phase of acrylonitrile-butadiene-styrene (ABS) by Dumas combustion method
ISO 2322:2023 Styrene-butadiene rubber (SBR) — Emulsion- and solution-polymerized types — Evaluation procedures
ISO 4581 Plastics - Styrene/acrylonitrile copolymers - Determination of residual acrylonitrile monomer content Gas chromatography method
ISO 6402-1:2001 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 19065-2:2019 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials —
ISO 4581:1987 Plastics; Styrene/acrylonitrile copolymers; Determination of residual acrylonitrile monomer content; Gas chromatography method
ISO 4581:1994 Plastics - Styrene/acrylonitrile copolymers - Determination of residual acrylonitrile monomer content - Gas chromatography method
ISO 7270-2:2012 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 2: Determination of styrene/butadiene/isoprene ratio
ISO 2322:1981 Rubber, raw styrene-butadiene, emulsion polymerized — Test recipe and method of evaluation

Korean Agency for Technology and Standards (KATS)

KS M ISO 2561:2003 Plastics-Determination of residual styrene monomer in polystyrene(PS) and inpact-resistant polystyrene(PS-I) by gas chromatography
KS M ISO 2561-2023 Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS M ISO 2561:2013 Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS M ISO 2561-2013(2023) Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS M ISO 2453-2014(2024) Rubber, raw styrene-butadiene, emulsion-polymerized — Determination of bound styrene content — Refractive index method
KS M ISO 2453-2025 Rubber, raw styrene-butadiene, emulsion-polymerized — Determination of bound styrene content — Refractive index method
KS M ISO 2561-2013(2018) Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS M ISO 2453-2019 Rubber, raw styrene-butadiene, emulsion-polymerized — Determination of bound styrene content — Refractive index method
KS M ISO 3136-2019 Rubber latex－Styrene-butadiene－Determination of bound styrene content
KS M ISO 3136-2025 Rubber latex — Styrene-butadiene — Determination of bound styrene content
KS M ISO 3136:2009 Rubber latex－Styrene-butadiene－Determination of bound styrene content
KS M 3349-2011 Styrene
KS M 3349-2016 Styrene
KS M 3349-2021 Styrene
KS M 3349-1981 Styrene
KS M ISO 7382:2002 Ethylene for industrial use-Sampling in the liquid and the gaseous phase
KS M ISO 2453-2014(2019) Rubber, raw styrene-butadiene, emulsion-polymerized — Determination of bound styrene content — Refractive index method
KS M ISO 7382-2013 Ethylene for industrial use－Sampling in the liquid and the gaseous phase
KS M ISO 7382:2013 Ethylene for industrial use－Sampling in the liquid and the gaseous phase
KS M ISO 4655:2009 Rubber－Reinforced styrene-butadiene latex－Determination of total bound styrene content
KS M 3011-1990(2001) TESTING METHODS FOR POLYSTYRENES
KS M 3011-1985 TESTING METHODS FOR POLYSTYRENES
KS M 3203-1976 POLYSTYRENE SHEETS
KS M 3203-2003 POLYSTYRENE SHEETS
KS M 3203-1997 POLYSTYRENE SHEETS
KS M ISO 4581-2021 Plastics — Styrene/acrylonitrile copolymers — Determination of residual acrylonitrile monomer content — Gas chromatography method
KS M ISO 4581:2016 Plastics — Styrene/acrylonitrile copolymers — Determination of residual acrylonitrile monomer content — Gas chromatography method
KS M ISO 4581-2016(2021) Plastics — Styrene/acrylonitrile copolymers — Determination of residual acrylonitrile monomer content — Gas chromatography method
KS M ISO 4581-2016 Plastics — Styrene/acrylonitrile copolymers — Determination of residual acrylonitrile monomer content — Gas chromatography method
KS M ISO 4581:2006 Plastics — Styrene/acrylonitrile copolymers-Determination of residual acrylonitrile monomer content-Gas chromatography method
KS M 3203-2004 POLYSTYRENE SHEETS
KS M 1941-2009 Butadiene for industrial use－Determination of active tert-butyl-catechol(TBC)[4-(1,1-dimethylethyl)-1,2 benzenediol]－High performance liquid chromatographic method
KS M 1941-2002(2007) Butadiene for industrial use－Determination of active tert-butyl-catechol(TBC)[4-(1,1-dimethylethyl)-1,2 benzenediol]－High performance liquid chromatographic method
KS M ISO 3136-2009(2019) Rubber latex－Styrene-butadiene－Determination of bound styrene content
KS M ISO 3136-2009(2024) Rubber latex－Styrene-butadiene－Determination of bound styrene content
KS M 3347-2022 Acrylonitrile-butadiene-styrene(ABS) sheets
KS M 3351-1979(1997) ACRYLONITRILE-BUTADIENE-STYRENE(ABS) RESIN
KS M ISO 7270-2:2017 Rubber — Analysis by pyrolytic gas-chromatographic methods — Part 2: Determination of styrene/butadiene/isoprene ratio
KS M 3347-1986 Acrylonitrile-butadiene-styrene(ABS) sheets
KS M 3347-2011 Acrylonitrile-butadiene-styrene(ABS) sheets
KS M ISO 7270-2:2007 Rubber － Analysis by pyrolytic gas-chromatographic methods － Part 2: Determination of styrene/butadiene/isoprene ratio

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 2561:2015 Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
OS GSO ISO 7382:2008 Ethylene for industrial use - Sampling in the liquid and the gaseous phase
OS GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
OS GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
OS GSO ISO 4581:2013 Plastics-Styrene/acrylonitrile copolymers - Determination of residual acrylonitrile monomer content - Gas chromatography method

GCC Standardization Organization

GSO ISO 2561:2015 Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
GSO ISO 2453:2015 Rubber, raw styrene-butadiene, emulsion-polymerized -- Determination of bound styrene content -- Refractive index method
GSO ISO 3136:2015 Rubber latex -- Styrene-butadiene -- Determination of bound styrene content
BH GSO ISO 7382:2024 Ethylene for industrial use - Sampling in the liquid and the gaseous phase
GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
GSO ISO 4581:2013 Plastics-Styrene/acrylonitrile copolymers - Determination of residual acrylonitrile monomer content - Gas chromatography method
BH GSO ISO 2322:2024 Styrene-butadiene rubber (SBR) — Emulsion- and solution-polymerized types — Evaluation procedures
OS GSO ISO 2322:2024 Styrene-butadiene rubber (SBR) — Emulsion- and solution-polymerized types — Evaluation procedures

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 2561:2016 Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BH GSO ISO 6402-2:2016 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
BH GSO ISO 4581:2016 Plastics-Styrene/acrylonitrile copolymers - Determination of residual acrylonitrile monomer content - Gas chromatography method

Japanese Industrial Standards Committee (JISC)

JIS K 6869:1999 Plastics -- Determination of residual styrene monomer in polystyrene by gas chromatography
JIS K 6869:2009 Plastics -- Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
JIS K 6727:1977 Styrene
JIS K 6876-2:2007 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determinati
JIS K 6876-1:2006 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
JIS K 6872:1995 Polystyrene sheets
JIS K 6873:1975 Acrylonitrile-butadiene-styrene (ABS) sheets
JIS K 6727 AMD 1:2006 Styrene (Amendment 1)
JIS K 6239-2:2017 Styrene-butadiene rubber(SBR) -- Determination of the microstructure of solution-polymerized SBR -- Part 2: FTIR with ATR method

British Standards Institution (BSI)

BS ISO 2561:2023 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BS ISO 2561:2006 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BS ISO 2561:2012 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PSI) by gas chromatography
BS ISO 2453:2020 Rubber, raw styrene-butadiene, emulsion-polymerized. Determination of bound styrene content. Refractive index method
ASTM D4026-06(2025)-25 Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene
23/30428206 DC BS ISO 2561. Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
10/30211408 DC BS ISO 2561. Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
18/30358631 DC BS ISO 2453. Rubber, raw styrene-butadiene, emulsion-polymerized. Determination of bound styrene content. Refractive index method
ASTM D3314-02(2025)-25 Standard Test Method for Rubber—Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices
BS ISO 21561:2005 Styrene-butadiene rubber (SBR). Determination of the microstructure of solution-polymerized SBR
BS EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Preparation of test specimens and determination of prop
22/30446382 DC BS ISO 3136. Rubber latex. Styrene-butadiene. Determination of bound styrene content
BS EN ISO 6402-2:2003(2004) Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
BS ISO 3136:2023 Rubber latex. Styrene-butadiene. Determination of bound styrene content (British Standard)
BS ISO 7382:2023 Ethylene for industrial use. Sampling in the liquid and the gaseous phase
BS ISO 7270-2:2024 Rubber. Analysis by pyrolytic gas-chromatographic method - Determination of styrene/butadiene/isoprene ratio
BS ISO 2322:2014 Styrene-butadiene rubber (SBR). Emulsion- and solution-polymerized types. Evaluation procedures
BS EN ISO 19065-1:2014 Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Designation system and basis for specifications
BS ISO 21561-2:2016 Styrene-butadiene rubber (SBR). Determination of the microstructure of solution-polymerized SBR. FTIR with ATR method
BS 4661:1971 Specification for emulsion polymerized anionic styrene-butadiene rubber latices
BS ISO 2322:2009 Styrene-butadiene rubber (SBR). Emulsion- and solution-polymerized types. Evaluation procedures
BS ISO 7270-2:2012 Rubber. Analysis by pyrolytic gas-chromatographic methods. Determination of styrene/butadiene/isoprene ratio
BS 2782-4 Method 453A:1978 Methods of testing plastics - Chemical properties - Determination of residual styrene monomer in polystyrene by gas chromatography
22/30452605 DC BS ISO 7382. Ethylene for industrial use. Sampling in the liquid and the gaseous phase
08/30176630 DC BS ISO 2322. Styrene-butadiene rubber (SBR). Emulsion and solution polymerized types. Evaluation procedures
BS ISO 24048:2022 Plastics. Determination of bound acrylonitrile content in the continuous phase of acrylonitrile-butadiene-styrene (ABS) by Dumas combustion method

Yugoslav Association for Standardization

JUS G.C1.073-1984 Rubber, raw styrene — butadien, emulsion polymerized. Test recipe and method of evaluation.
JUS ISO 2561:1992 Plastics. Determination of residual styrene monomer in polystyrene. Gas chromatographic method
JUS ISO 4581:1992 Plastics. Styrene/acrylonitrile copolymers. Determination of residual acrylonitrile monomer content. Gas chromatography method

Spanish Association for Standardization (UNE)

UNE-ISO 2561:2014 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
AENOR UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 2: Preparation of test specimens and determinat...
UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
AENOR UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 1: Designation system and basis for specificati...
UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
UNE-EN ISO 6402-1:2003 Plastics. Acrylonitrile-styrene-acrylate-(ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Part 1: Designation system and basis for specification...
UNE 53259:1975 PLASTICS MATERIALS. DETERMINATION OF RESIDUAL MONOMER IN POLYSTYRENE BY GAS CHOMATOGRAPHY
UNE-EN ISO 19065-2:2020 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...

Polski Komitet Normalizacyjny (PKN)

PN C89068-1961 Polystyrene Determination of styrene content
PN BN 6041-11-1966 Polystyrene fuels and pigments. Detection method
PN Z04152-02-1986 Air purity protection Tests for styrene Determination of styrene in work places by gas chromatography with sample enrichment
PN Z04152-05-1993 Air purity protection. Tests for styrene content. Determination of styrene in ambient air (imission) by gas chromatography
PN BN 6113-26-1966 Styrene primer
PN C04641-04-1989 Water and wastewater Aromatic hydrocarbon content testing Determination of benzene, toluene, (m+p)-xylene, o-xylene, styrene by gas chromatography using the headspace technique
PN BN 6115-35-1966 artificial styrene glaze
PN Z04152-10-1992 Air purity protection ests for styrene etermination of styrene in permanent esidence area air by gas hromatography with sample nrichment
PN BN 6022-01-1966 Organic products. Styrene
PN C89416-1990 Plastics Determination of resistance of polystyrene and styrene copolymers to attack by trichlorofluoromethane
PN C89292-1971 Polystytene (homopolymer)

Ente Nazionale Italiano di Unificazione

UNI ISO 2453:2020 Rubber, raw styrene-butadiene, emulsion-polymerized - Determination of bound styrene content - Refractive index method
UNI ISO 2453:2007 Rubber, raw styrene-butadiene, emulsion- polymerized - Determination of bound styrene content - Refractive index method
UNI 9263:1988 Elastomers. Determination of polystyrene blocks in styrene-butadiene rubber and styrene-reinforced latices.
UNI EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determina...
UNI 8689:1984 Elastomers. Raw materials and compounding ingredients. styrene- butadiene rubbers. Determination of bound styrene content.
UNI EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificat...
UNI EN ISO 6402-2:2006 Plastics - Acrylonitrile-styrene- acrylate (ASA), acrylonitrile-(ethylene- propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determ...
UNI ISO 2322:2010 Styrene-butadiene rubber (SBR) - Emulsion- and solution-polymerized types - Evaluation procedures
UNI EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene- acrylate (ASA), acrylonitrile-(ethylene- propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Designation system and basis for specifications

Association Francaise de Normalisation

NF T46-071*NF ISO 2453:2020 Rubber, raw styrene-butadiene, emulsion-polymerized - Determination of bound styrene content - Refractive index method
NF T51-901:1981 Plastics. Determination of residual styrene monomer in polystyrene by gas chromatography.
NF ISO 7382:1987 Ethylene for industrial use - Liquid and gas phase sampling
NF ISO 2453:2020 Raw emulsion polymerized butadiene-styrene rubber - Determination of bound styrene content - Refractive index method
NF T20-817*NF ISO 7382:1987 Ethylene for industrial use. Sampling in the liquid and the gaseous phase.
NF T53-037-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2 : preparation of test specimens and determinatio
NF T43-010*NF ISO 2322:2014 Styrene-butadiene rubber (SBR) - Emulsion- and solution-polymerized types - Evaluation procedures
NF EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) materials for molding and extrusion - Part 2: Preparation of
NF T53-037-1:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
NF EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA) plastic, acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) plastic and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) plastic for molding and extrusion - Part 1: s
NF T53-039-1*NF EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
NF T46-051-2*NF ISO 7270-2:2012 Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 2: determination of styrene/butadiene/isoprene ratio

American National Standards Institute （ANSI)

ANSI/ASTM D4322:1996 Test Method for Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymers and Nitrile Rubber by Headspace Gas Chromatography
ANSI/ASTM D5524:1994 Test Method for Determination of Phenolic Antioxidants in High Density Polyethylene Using Liquid Chromatography
ANSI/ASTM D5508:1994 Test Method for Quantitation of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymers and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (08.03)
ANSI/ASTM D4225:1997 Specification for Styrene-Butadiene Sheeting (08.03)

Bureau of Indian Standards

IS 4105-1988 Styrene (vinylbenzene) specifications
IS 4105-2023 Styrene (Vinyl Benzene)-Specification
IS 4511-4-2023 Methods of Test for Styrene Butadiene Rubber (SBR) Latices - Part 4 Determination of Bound Styrene
IS 3928-1986 Specification for styryl acetate
IS 4518-3-2024 Styrene-Butadiene Rubbers-Methods of Test - Part 3 Determination of Bound Styrene Content-Refractive Index Method
IS 4511-7-1967 Methods of test for styrene-butadiene rubber (SBR) latices: Part 7 Determination of dry polymer, total solids, density, residual styrene, bound styrene and soap content

National Standardisation Body (ASRO)

STAS 7459/1-1982 STYRENE-BUTADIENE COPOLY- MERS Delerinination of bound styrene conlvnt
STAS 7459/2-1974 Rubbcrs RAW BUTADIENE-STYRENE RUBBER Detcrmination of bound a-methyl styrene monomer content
STAS 7862-1980 POLYSTYRENE
STAS SR ISO 3136:1994 Rubber Latex - Styrene-Butadiene Determination of bound styrene content
STAS 12207-1984 TECHNICAL STYRENE
STAS 10045-1989 PLASTICS Styrefte determination ol polystyrene
STAS 8365/2-1990 Rubber. Test recipe for butadiene-styrene and butadiene-alphamethyil styrene rubbers testing
STAS 9410-1980 SHOCK-RESISTANT POLYSTYRENE PLATES

American Society for Testing and Materials (ASTM)

ASTM UOP913-92 Impurities in Styrene by Gas Chromatography
ASTM D4590-18 Standard Test Method for Colorimetric Determination of p-tert -Butylcatechol In Styrene Monomer or AMS (α–Methylstyrene) by Spectrophotometry
ASTM D4026-87(2002)e1 Standard Test Method for Rubber Latex-Styrene-Butadiene Copolymer-Determination of Residual Styrene
ASTM D4026-06(2025) Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene
ASTM RR-D16-1031 2003 D5135-Test Method for Analysis of Styrene by Capillary Gas Chromatography
ASTM D4026-06(2021) Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene
ASTM D4026-06 Standard Test Method for Rubber Latex8212;Styrene-Butadiene Copolymer8212;Determination of Residual Styrene
ASTM D4225-97 Standard Specification for Styrene-Butadiene Sheeting
ASTM D4026-06(2012) Standard Test Method for Rubber Latexmdash;Styrene-Butadiene Copolymermdash;Determination of Residual Styrene
ASTM D3314-02(2021) Standard Test Method for Rubber—Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices
ASTM D3314-02(2025) Standard Test Method for Rubber—Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices
ASTM D5775-95(2023) Standard Test Method for Rubber—Determination of Bound Styrene in Styrene Butadiene Rubber by Refractive Index
ASTM D4275-17 Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene–Vinyl Acetate (EVA) Copolymers by Gas Chromatography
ASTM D4322-96(2001)e1 Standard Test Method for Residual Acrylonitrile Monomer Styrene-Acrylonitrile Copolymers and Nitrile Rubber by Headspace Gas Chromatography
ASTM D4275-02 Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene-Vinyl Acetate (EVA) Copolymers By Gas Chromatography
ASTM D4275-96 Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene-Vinyl Acetate (EVA) Copolymers By Gas Chromatography
ASTM D4026-06(2017) Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene
ASTM D4275-09 Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene x2013; Vinyl Acetate (EVA) Copolymers By Gas Chromatography

Magyar Szabványügyi Testület

MSZ 21862/21-1980 Definition of air contaminants for gas-fired workplaces, detecting benzene; toluene; xylene; ethylbenzene and styrene
MSZ 7452-1961 Detecting soluble components in polystyrene to detect plastics

German Institute for Standardization

DIN 53741:1971 Testing of Plastics; Determination of Volatile Aromatic Hydrocarbons in Polystyrene; Gas chromatographic Method
DIN 53743:1979-07 Testing of plastics; gaschromatographical determination of vinyl chloride (VC) in polyvinyl chloride (PVC)
DIN EN ISO 6402-2:2004-05 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DIN EN ISO 19065-2 E:2018 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specime...
DIN ISO 4655:2004-11 Rubber - Reinforced styrene-butadiene latex - Determination of total bound styrene content (ISO 4655:1985)
DIN EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN 7741-1:1968 Poly(styrene) moulding materials based on styrene homopolymers
DIN EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specification
DIN EN ISO 19065-1 E:2013 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basi...
DIN EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN EN ISO 19065-2:2018-03 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specime...
DIN EN ISO 6402-1:2003-02 Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DIN 53743:1979 Testing of plastics; gaschromatographical determination of vinyl chloride (VC) in polyvinyl chloride (PVC)
DIN EN ISO 19065-1 E:2013-07 Plastics acrylonitrile styrene acrylate, acrylonitrile (ethylene propylene diene) styrene and acrylonitrile (chlorinated polyethylene) styrene molded and extruded materials Part 1: Nomenclature system and basis for specifications (draft)
DIN 16891:1980 Pipes of acrylnitrile-butadiene-styrene (ABS) or acrylnitrile-styrene-acrylester (ASA); dimensions
DIN 7741 Beiblatt:1968 Polystyrene Moulding Compound Properties of Polystyrene Moulding Compound Test Pieces
DIN 55471-1:1983 Cellular polystyrene for packaging; requirements and testing
DIN 55471-1 Cellular polystyrene for packaging; requirements and testing
DIN EN ISO 19065-2:2019-06 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...

Argentine Institute of Standardization

IRAM 13 310-1962 Determination of soluble styrene content in polystyrene
IRAM 1049-N.I.O.-1949 Styrene resin

Indonesia Standards

SNI 06-1446-1989 Determination of "Styrene" Content in Natural Rubber "Styrene Butadiene Rubber"
SNI 8994:2021 Monomer Styrene
SNI 06-0177-2000 Expandable polistirena

Standard Association of Australia （SAA）

AS 2508.3.012:1982 Safe storage and handling information card - Styrene (vinyl benzene, styrene monomer)

United States Navy

NAVY MIL-S-14195 A-1970 STYRENE MONOMER
NAVY MIL-S-14195 A REINST NOTICE 2-1990 STYRENE MONOMER
NAVY MIL-S-14195 A NOTICE 4-2003 STYRENE MONOMER

Universal Oil Products Company (UOP)

UOP 913-1992 Impurities in Styrene by Gas Chromatography

Finnish Standards Institute

SFS 4388-1979 plastic. Polystyrene. Determination of styrene content depicted by vaporized chromium

Danish Standards Foundation

DANSK DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DANSK DS/ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
DANSK DS/EN ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
DS/EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DANSK DS/EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination

Standards Norway

NS-EN ISO 6402-2:2003 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 2: Preparation of test specimens and determinat...
NS-EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
NS-EN ISO 19065-1:2014 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
NS-EN ISO 6402-1:2002 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
NS-EN ISO 6402-1:2001 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...

The Standards, Productivity and Innovation Board

SS 323 Pt.D6-1987 Methods Of Test For Flexible Plastic Packaging Materials Part D6 : Determination Of Residual Styrene Monomer In Polystyrene By Gas Chromatography

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4585.1:1999 Low styrene emission resins - Determination of styrene evaporation from unsaturated polyester and vinyl ester resins
AS/NZS 3879:2006 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and fittings

European Committee for Standardization (CEN)

EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-( ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-( chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat
EN ISO 6402-2:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA, AES, ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 6420-2:1994
EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile- (ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile- (chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificatio
EN ISO 6402-1:2001 Plastics - Acrylonitrile-Styrene-Acrylate (ASA)@ Acrylonitrile-(Ethylene-Propylene-Diene)-Styrene (AEPDS) and Acrylonitrile-(Chlorinated Polyethylene)-Styrene (ACS) Moulding and Extrusion Materials - Part 1: Designation Systems and Basis for Specification
EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
EN ISO 6402-1:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA,AES,ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 1: Designation System and Basis for Specifications ISO 6402-1:1997
EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA)@ acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination

US Federal Contractor Registration (USFCR)

FCR VA 07 52 16-2010 STYRENE-BUTADIENE-STYRENE MODIFIED BITUMINOUS MEMBRANE ROOFING, HOT-APPLIED
FCR VA 07 52 16.13-2010 STYRENE-BUTADIENE-STYRENE MODIFIED BITUMINOUS MEMBRANE ROOFING, COLD-APPLIED

United States Department of Veterans Affairs (VA)

VA 07 52 16.13-2010 STYRENE-BUTADIENE-STYRENE MODIFIED BITUMINOUS MEMBRANE ROOFING, COLD-APPLIED

GM Europe

GME QK 000753-1998 Modified thermoplastic elastomer materials based on styrene-ethylene/butylene-styrene. English/German
GME QK 000223-1996 Styrol-Acrylnitril-Copolymerisat Styrene-Acrylonitrile-Copolymer English Translation Available
GME QK 002400-2006 ABS-, ASA- resp. SAN-Blends (English/German)
GME QK 000222-1996 Styrol-Acrylnitril-Copolymerisat Styrene-Acrylonitrile-Copolymer English Translation Available
GME QK 000225-1996 Styrol-Acrylnitril-Copolymerisat Styrene-Acrylonitrile-Copolymer English Translation Available

Standards Institution of Israel

S.I.533-1967 POLYSTYRENE SHEETS

Lithuanian Standards Office

LST EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
LST EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

American Association of Medical Assistants (AAMA)

AAMA 304-2007 Voluntary Specification for Acrylonitrile-Butadiene-Styrene(ABS) Exterior Profiles Capped with ASA or ASA/PVC Blends

Engineering Sciences Data Unit (ESDU)

ESDU 99007-2000 Vapour pressures and critical points of liquids: Halogenated alkylbenzenes and halogenated styrenes.

GM North America

GM 9985206-1980 Adhesive - Styrene

Instituto Colombiano de Normas Técnicas y Certificación

ICONTEC 1524-1980 Ordinary impact-resistant polystyrene, related specifications

Thai Industrial Standards Institute (TISI)

TIS 655.3-2011 Plastic utensils for food.part 3: acrylonitrile-butadiene-styrene and styrene.acrylonitrile

GM Holden Ltd

HOLDEN HN 1854-2009 EXPANDED POLYSTYRENE
HOLDEN HN 1577-2001 Moulding Compound - Styrene Acrylonitrile (SAN)

Association of German Mechanical Engineers

DVS 2204-3-1981 Glueing of thermoplastics; polystyrene and allied plastics

GM Daewoo

GMKOREA EDS-M-4626-2014 Polypropylene and Styrene Butadiene Styrene Copolymer Blend (Version 10; English/Korean)
GMKOREA EDS-M-4624-2014 Polypropylene and styrene, ethylene, butadiene, styrene copolymer blend Shore A 70 (Version 2; English/Korean)

Czech Standards Institute (UNMZ)

CSN 64 3510 Z1-1995 brick expanded polystyrene

Canadian General Standards Board （CGSB)

CAN3-A451.1-M86-1986(R2001) Polystyrene Insulation Adhesives
CAN3 A451.1-M86-1986(R2001) Polystyrene Insulation Adhesives

Others: Liquid detection,Liquid detection,Styrene liquid chromatography,Gas-liquid phase detection,What does liquid phase detection,Liquid detection line,Styrene liquid phase detection,Styrene detection liquid phase,Styrene liquid phase,Styrene liquid chromatography,Styrene liquid phase,Solid phase detection Liquid phase detection,Styrene liquid chromatography,Gas-liquid phase detection,Styrene liquid phase detection,Styrene liquid phase detection,Liquid and solid phase detection,Liquid Chromatography Styrene,Styrene liquid phase in water