Performance Test Granularity

Performance Test Granularity, Total:384 items.

The international standard classification for "Performance Test Granularity" includes: Other non-ferrous metals and their alloys , Ventilation and air-conditioning systems , Particle size analysis. sieving , Solid fuels , cork and cork products , Materials for aluminium production , Chemical analysis , Animal feeding stuffs , Other products of the chemical industry , Textile fabrics , Powder metallurgy , Manufacturing forming processes , Aluminium and aluminium alloys , Road engineering in general , Fertilizers .

The Chinese standard classification for "Performance Test Granularity" includes: Rare metals and their alloys analysis method , Rare metals and their alloys , Heat supply and heating engineering , Sieving, Sieve Plate and Sieve Screen , Coal for coking, chemical and building materials , Charcoal , Artificial board , Light metals and their alloys analysis method , Catalyst , Livestock and poultry feed and additive , Other chemical products in general , Basic standards and general methods , Powder metallurgy in general , Casting , Metal physical property test method , Leather processing and products in general , Highway engineering , Basic standards and general methods on chemical fertilizers .

Professional Standard - Rare Earth

XB/T 701-2007 Test methods samarium cobalt permanent magnet alloy powder Determination of particle size Fisher method
XB/T 701-2015 Samarium cobalt permanent magnet alloy powder test methods. Determination of particle size and distributions

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 6288-1986 Determination of particle size for granular molecular sieve
GB/T 6167.1-1985 Methods for testing the performance of dust particle counter--Calibration for sizing particle
GB 6288-1986 Determiantion of particle size for granular molecular sieve
GB/T 6609.37-2009 Chemical analysis methods and determination of physical performance of alumina - Part 37: Determination of the particles size content less then 20μm
GB/T 6167-2007 Methods for testing the performance of airborne particle counter
GB/T 3789.29-1991 Measurements of the electrical properties of transmitting tubes-Method of measuring the non-linearity in the luminance of the lower frequency
GB/T 6609.27-2004 Chemical analysis methods and Determination of physical performance of alumina Particle size analysis-Sieving method
GB/T 31057.1-2014 Granular materials―The physical properties―Part 1:Determination of apparent density
GB/T 7702.3-2008 Test method for granular activated carbon from coal - Determination of hardness
GB/T 12496.2-1999 Test methods of wooden activated carbon-Determination of particle size distribution
GB/T 6167.2-1985 Methods for testing the performance of dust particle counter; Particle concentration
GB/T 30202.2-2013 Test method for granular coal-based activated carbon for desulfurization and denitration process―Part 2: Particle size
GB/T 43211-2023 Test methods for size of cork granules by mechanical sieving
GB/T 20170.1-2006 Test methods for physical characters of rare earth metals and their compounds - Determination for particle size distribution of rare earth compounds
GB/T 7702.4-1997 Standard test method for packing density of granular activated carbon from coal
GB/T 7702.2-1997 Standard test method for particle size distribution of granular activated carbon from coal
GB/T 7702.3-1997 Standard test method for hardness of granular activated carbon from coal

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38413-2019 Textiles—Test methods for filtration of particulate matter
GB/T 31057.2-2018 Granular materials—Physical properties—Part 2:Determination of tap density
GB/T 40944-2021 Determination of feed particle size—Geometric mean diameter method
GB/T 31057.3-2018 Granular materials—Physical properties—Part 3:Fluidity index
GB/T 6288-2021 Determination of particle size for granular molecular sieve

Military Standard of the People's Republic of China-General Armament Department

GJB 8684.23-2015 Test methods for pyrotechnic properties - Part 23: Determination of particle size distribution of smoke solid particles by electron microscopy
GJB 963-1990 Performance requirements of ejection acceleration test system
GJB 8684.22-2015 Test methods for pyrotechnic properties - Part 22: Determination of smoke solid particle number concentration by electron microscopy
GJB 8684.21-2015 Pyrotechnic powder performance test methods Part 21: Determination of mass concentration of smoke solid particles Filter membrane weighing method
GJB 771.106-1991 Test methods for gunpowder performance. Screening method for determination of propellant particle size distribution.
GJB 772.102-1989 Test methods for explosives Particle size determination microscopy
GJB 1047.11-1990 Black powder test method Determination of particle size
GJB 771.101-1989 Gunpowder Performance Test Methods Determination of Bulk Density
GJB 772.101-1989 Test methods for explosives Particle size determination Water sieve method
GJB 772.108-1990 Test Methods for Explosives Particle Size Determination Dry Sieving Method

Group Standards of the People's Republic of China

T/SZAS 73-2023 Performance verfication of nucleic acid concentration detection kit
T/BTQSA 005-2020 NdFeB permanent magnet alloy powder physical properties test method laser particle size determination
T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter （PM2.5）mass concentration measurement instruments based on light scattering principle

Inner Mongolia Provincial Standard of the People's Republic of China

DB15/T 1408-2018 NdFeB permanent magnet alloy powder physical properties test method laser particle size determination

Professional Standard - Aviation

HB 5441.1-1989 Performance Test for Sintered Metal Product and Powder - Sieve Method for the Determination of Particle Size of Metal Powder
HB 5441.3-1989 Performance Test for Sintered Metal Product and Powder - Test Method for Tensile Strength of Metallic Sintered Material (Except Hard Alloy)
HB 5441.7-1989 Performance Test for Sintered Metal Product and Powder - Methods of Measurement for Density and Percentage of Opening of Permeable Metallic Sintered Material
HB 5441.2-1989 Performance Test for Sintered Metal Product and Powder - Test Method for Oil Content of Permeable Metallic Sintered Material
HB 5351.7-2004 Test method for properties of investment casting slurry -- Part 7: The torque balance sedimentation analytical method for the determination of refractory powder granularity
HB 5441.9-1989 Performance Test for Sintered Metal Product and Powder - Determination for Apparent Hardness of Metallic Sintered Material (Except Hard Alloy)
HB 5441.8-1989 Performance Test for Sintered Metal Product and Powder - Determination for Radial Crushing Strength of Sintered Metal Bushing
HB 5351.8-2004 Test mehtod for properties of investment casting slurry -- Part 8: The laser speedy mensuration method for the determination of refractory powder granularity
HB 5441.6-1989 Performance Test for Sintered Metal Product and Powder - Test Method for Flowability of Metal Powder
HB 5441.4-1989 Performance Test for Sintered Metal Product and Powder - Test Method for Apparent Density of Metal Powder

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 5384.22-2005 Test methods of performance for pyrotechnic composition Part 21: Concentration determination of solid smoke particles quantities Electron microscope method
GJB 5384.21-2005 Test methods of performance for pyrotechnic composition. Part 21: Mass concentration determination of solid smoke particles. Filter paper weighting method
GJB 6239.2-2008 Test method of impregnated activated carbon for military. Part 2: Particle size
GJB 5384.23-2005 Test methods of performance for pyrotechnic composition Part 23: Determination of particles size distribution for solid smoke particles Electron microscope method

Taiwan Provincial Standard of the People's Republic of China

CNS 10437-2000 Test method for grain size of steel fertilizer granules
CNS 7530-1995 Abrasive Particle Size Test Method
CNS 11632-1986 Ferrous alloy particle size sample sampling method and particle size determination method

Professional Standard - Agriculture

124药典四部-2020 0900 Characteristic inspection method 0982 Particle size and particle size distribution measurement method
218药典三部-2020 Physical examination method 0982 Particle size and particle size distribution method
845兽药典一部-2015 Appendix Contents 0900 Characteristic Inspection Method 0982 Particle Size and Particle Size Distribution Determination Method
2354药典二部-2010 APPENDIX IX E DETERMINATION OF PARTICLE SIZE AND PARTICLE SIZE DISTRIBUTION
143药典四部-2015 0900 Characteristic inspection method 0982 Particle size and particle size distribution measurement method

Professional Standard - Military and Civilian Products

WJ 2707.2-2008 Test methods of performance of FAE. Part 2: Granularity

Professional Standard - Non-ferrous Metal

YS/T 438.1-2001 Methods for physical performance determination of sandy alumina - Determination of size distribution - Sieving method
YS/T 438.1-2013 Methods for Physical Performance Determination of Sandy Alumina - Part 1: Determination of Size Distrinbution - Sieving Method

工业和信息化部

YS/T 1065.2-2015 Methods for physical performance determination of zeolite―Part 2:Determination of particle size―Centrifugal sedimentation method

Professional Standard - Meteorology

QX/T 92-2008 Test specification of calibration equipment for humidity instrument

Professional Standard - Light Industry

QB/T 3812.4-1999 Leather. Physical testing. Measurement of thickness
QB/T 3812.7-1999 Leather. Determination of distension and strength of grain. Ball burst test

Professional Standard - Machinery

JB/T 7612-1994 Specification for particle size distribution test of boiler pulverized coal

Professional Standard - Traffic

JT/T 690-2007 Test method for photometric characteristics of retroreflectors

Professional Standard - Nuclear Industry

EJ/T 368-1989 HEPA filter performance test method

Professional Standard - Chemical Industry

HG 2223-1991 Particle Size Determination of Granular Double Superphosphate
HG/T 2223-1991 Granular Triple Superphosphate - Determination of Particle Size

National Metrological Technical Specifications of the People's Republic of China

JJF 2019-2022 Measurement Specification for Temperature Performance of Liquid Constant Temperature Testing Equipment

British Standards Institution (BSI)

BS EN 1097-6:2022 Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption
BS EN 1097-6:2013 Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption
BS EN 1097-7:2022 Tests for mechanical and physical properties of aggregates. Determination of the particle density of filler. Pyknometer method
BS ISO 10155:1995(1999) Stationary source emissions — Automated monitoring of mass concentrations of particles — Performance characteristics, test methods and specifications
BS EN 13205-4:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Laboratory performance test based on comparison of concentrations
BS ISO 20290-5:2023 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of particle size distribution by sieving method
BS ISO 20290-1:2021 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of bulk density, particle density, particle mass-per-volume and water absorption
BS ISO 6344-1:1998 Coated abrasives. Grain size analysis. Grain size distribution test
BS EN 933-1:1997 Tests for geometrical properties of aggregates - Determination of particle size distribution - Sieving method
BS EN 933-1:2012 Tests for geometrical properties of aggregates. Determination of particle size distribution. Sieving method
BS EN 1367-2:2010 Tests for thermal and weathering properties of aggregates. Magnesium sulfate test
BS EN 1367-2:2009 Tests for thermal and weathering properties of aggregates - Magnesium sulfate test
BS EN 13205-2:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Laboratory performance test based on determination of sampling efficiency
19/30373025 DC BS ISO 20290-1. Aggregates for concrete. Test methods for mechanical and physical properties. Part 1. Determination of bulk density, particle density, particle mass-per-volume and water absorption
20/30392580 DC BS EN 1097-6. Tests for mechanical and physical properties of aggregates. Part 6. Determination of particle density and water absorption
BS ISO 15900:2009 Determination of particle size distribution - Differential electrical mobility analysis for aerosol particles
BS EN 933-2:2020 Tests for geometrical properties of aggregates - Determination of particle size distribution. Test sieves, nominal size of apertures
BS EN 933-4:2000 Tests for geometrical properties of aggregates - Determination of particle shape - Shape index
BS EN 933-3:2012 Tests for geometrical properties of aggregates. Determination of particle shape. Flakiness index
BS ISO 9136-2:2000 Abrasive grains - Determination of bulk density - Microgrits
BS EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
BS EN 1097-6:2000 Tests for mechanical and physical properties of aggregates - Determination of particle density and water absorption
20/30424361 DC BS EN 1097-7. Tests for mechanical and physical properties of aggregates - Part 7. Determination of the particle density of filler. Pyknometer method
BS EN 13205-6:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Transport and handling tests
22/30408122 DC BS ISO 20290-5. Aggregates for concrete. Test methods for mechanical and physical properties. Part 5. Determination of particle size distribution by sieving method
BS ISO 6344-3:2013 Coated abrasives. Grain size analysis. Determination of grain size distribution of microgrits P240 to P2500

American Society for Testing and Materials (ASTM)

ASTM RR-D28-1007 2010 D2862-Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM D2862-16(2022) Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM D2862-97(2009) Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM D2862-10 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM D2862-16 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM D2862-97(2009)e1 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM E1772-95 Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
ASTM E1772-95(2001) Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
ASTM E112-96e2 Standard Test Methods for Determining Average Grain Size
ASTM E112-96e1 Standard Test Methods for Determining Average Grain Size
ASTM E112-24 Standard Test Methods for Determining Average Grain Size
ASTM RR-D11-1091 2000 D2240- Standard Test Method for Rubber Property—Durometer Hardness
ASTM E112-10 Standard Test Methods for Determining Average Grain Size
ASTM E112-12 Standard Test Methods for Determining Average Grain Size
ASTM E112-96e3 Standard Test Methods for Determining Average Grain Size
ASTM E112-96(2004)e2 Standard Test Methods for Determining Average Grain Size
ASTM E112-13(2021) Standard Test Methods for Determining Average Grain Size
ASTM D5158-98(2019) Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air-Jet Sieving
ASTM RR-D24-1009 1988 D1937-Test Method for Carbon Black, Pelleted—Mass Strength
ASTM D8541-23 Standard Test Method for Determination of Relative Rotation to Evaluate the Workability of Asphalt Mixture Using Wireless Particle-Size Sensors
ASTM D1366-86(2007) Standard Practice for Reporting Particle Size Characteristics of Pigments
ASTM D8541-24 Standard Test Method for Determination of Relative Rotation to Evaluate the Workability of Asphalt Mixture Using Wireless Particle-Size Sensors
ASTM D6913-04 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913-04(2009) Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis

International Organization for Standardization (ISO)

ISO 105-Z05:1996 Textiles - Tests for colour fastness - Part Z05: Determination of the dusting behaviour of dyes
ISO 20290-1:2021 Aggregates for concrete - Test methods for mechanical and physical properties - Part 1: Determination of bulk density, particle density, particle mass-per-volume and water absorption
ISO 6344-1:1998 Coated abrasives - Grain size analysis - Part 1: Grain size distribution test
ISO 20290-5:2023 Aggregates for concrete — Test methods for mechanical and physical properties — Part 5: Determination of particle size distribution by sieving method
ISO 23278:2015 Non-destructive testing of welds - Magnetic particle testing - Acceptance levels
ISO 15900:2009 Determination of particle size distribution - Differential electrical mobility analysis for aerosol particles
ISO 3379:1976 | IULTCS/IUP 9 Leather — Determination of distension and strength of grain — Ball burst test

Association Francaise de Normalisation

NF P18-622-1/A1:2006 Tests for geometrical properties of aggregates - Part 1 : determination of particle size distribution - Sieving method.
NF P18-622-1*NF EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1 : determination of particle size distribution - Sieving method.
NF X11-632:1990 SIZE DETERMINATION. EXPRESSION FO RESULTS OF SIZE DETERMINATION.
NF P18-650-6:2014 Tests for mechanical and physical properties of aggregates - Part 6 : determination of particle density and water absorption
NF P18-650-6/A1:2006 Tests for mechanical and physical properties of aggregates - Part 6 : determination of particle density and water absorption.
NF EN 13205-4:2014 Exposure in the workplace - Evaluation of the performance of sampling devices for measuring concentrations of airborne particles - Part 4: laboratory performance test by comparison of concentrations...
NF EN 13205-5:2014 Workplace exposure - Performance assessment of sampling devices for measuring airborne particulate matter concentrations - Part 5: performance testing of aerosol samplers, react...
NF P18-650-6*NF EN 1097-6:2022 Tests for mechanical and physical properties of aggregates - Part 6 : determination of particle density and water absorption
NF B41-204:2002 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 3 : determination of grain size and size distribution (characterized by the linear intercept method).
NF X43-283-4*NF EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4 : laboratory performance test based on comparison of concentrations
NF EN 13205-2:2014 Exposure in the workplace - Evaluation of the performance of sampling devices for measuring the concentrations of particles suspended in the air - Part 2: laboratory performance test by determination by the...
NF X11-666:1984 PARTICLE SIZE ANALYSIS OF POWDERS. DIFFRACTION METHOD.
NF X43-283-2*NF EN 13205-2:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2 : laboratory performance test based on determination of sampling efficiency
XP P94-041:1995 Soils: recognition and tests - Particle size identification - Wet sieving method
FD CEN/TR 17856:2022 Measurements of varnish properties of non-grain oriented electrical steels

SCC

NS-EN 933-1:1997 Tests for geometrical properties of aggregates — Part 1: Determination of particle size distribution — Sieving method
NS-EN 933-1:2012 Tests for geometrical properties of aggregates — Part 1: Determination of particle size distribution — Sieving method
BS EN 1097-7:1999 Tests for mechanical and physical properties of aggregates-Determination of the particle density of filler. Pyknometer method
AENOR UNE-EN 933-1/A1:2006 Tests for geometrical properties of aggregates. Part 1: Determination of particle granulometry. Sieving methods
NS-EN 13205-4:2014 Workplace exposure — Assessment of sampler performance for measurement of airborne particle concentrations — Part 4: Laboratory performance test based on comparison of concentrations
AENOR UNE-EN 1097-6:2001 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES. PART 6: DETERMINATION OF PARTICLE DENSITY AND WATER ABSORPTION.
DANSK DS/EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations
DANSK DS/ISO 10155:1996 Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications
12/30259171 DC BS EN 13205-4. Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Part 4. Laboratory performance test based on comparison of concentrations
DIN EN 13205-4 E:2012 Draft Document - Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations; German version prEN 13205-4
DANSK DS/EN 1097-6:2013 Tests for mechanical and physical properties of aggregates – Part 6: Determination of particle density and water absorption
NS-EN 1097-6:2000 Tests for mechanical and physical properties of aggregates — Part 6: Determination of particle density and water absorption
NS-EN 1097-6:2022 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
NS-EN 1097-6:2013 Tests for mechanical and physical properties of aggregates — Part 6: Determination of particle density and water absorption
AENOR UNE-EN 1097-6/A1:2006 Tests to determine the mechanical and physical properties of aggregates. Part 6: Determination of particle density and water absorption.
NS-EN 13205:2001 Workplace atmospheres — Assessment of performance of instruments for measurement of airborne particle concentrations
DANSK DS/EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
AENOR UNE-EN 1097-7:2009 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
NS-EN 1097-7:2022 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
NS-EN 1097-7:1999 Tests for mechanical and physical properties of aggregates — Part 7: Determination of the particle density of filler — Pyknometer method
DANSK DS/EN 1097-7:2008 Tests for mechanical and physical properties of aggregates – Part 7: Determination of the particle density of filler – Pyknometer method
NS-EN 1097-7:2008 Tests for mechanical and physical properties of aggregates — Part 7: Determination of the particle density of filler — Pyknometer method
BS 5551-3-3.5:1988 Fertilizers. Physical properties-Method for determination of particle size distribution by test sieving
NS-EN 13205-2:2014 Workplace exposure — Assessment of sampler performance for measurement of airborne particle concentrations — Part 2: Laboratory performance test based on determination of sampling efficiency
DANSK DS/EN 13205-2:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency
10/30218642 DC BS EN 1097-6. Tests for mechanical and physical properties of aggregates. Part 6. Determination of particle density and water absorption
DANSK DS/EN 13205-6:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests
AWWA ACE94184 Analysis of Pilot and Full Scale Granular Activated Carbon Performance Data
DIN EN 13205-2 E:2012 Draft Document - Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency; German version prEN 13205-2:2012
AASHTO T 88-2013(2017) Standard Method of Test for Particle Size Analysis of Soils
AASHTO T 88-2019 Standard Method of Test for Particle Size Analysis of Soils
AASHTO T 219-1987(2018) Standard Method of Test for Testing Lime for Chemical Constituents and Particle Sizes
11/30228336 DC BS EN 13205. Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations
AASHTO T 88-2000(2004) Standard Method of Test for Particle Size Analysis of Soils
BS 3999-5C:1968 Methods of measuring the performance of household electrical appliances-Shade chart
AASHTO T 219-2022 Standard Method of Test for Testing Lime for Chemical Constituents and Particle Sizes
NS-EN 13205-6:2014 Workplace exposure — Assessment of sampler performance for measurement of airborne particle concentrations — Part 6: Transport and handling tests
DIN EN 13205-6 E:2012 Draft Document - Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests; German version prEN 13205-6
AWWA MTC64559 Paramagnetic Particles in Membrane Integrity Testing
07/30165783 DC BS EN 1097-7. Tests for mechanical and physical properties of aggregates. Part 7. Determination of the particle density of filler. Pyknometer method
12/30259166 DC BS EN 13205-2. Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Part 2. Laboratory performance test based on determination of sampling efficiency
DIN 18123 E:2010 Draft Document - Soil, investigation and testing - Determination of grain-size distribution
DANSK DS/EN 933-1:2013 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
DANSK DS/EN 933-2:2020 Tests for geometrical properties of aggregates – Part 2: Determination of particle size distribution – Test sieves, nominal size of apertures
VDI 4202 BLATT 1-2010 Minimum requirements for automatic immission measuring devices in suitability testing — point measurement method for gaseous and particulate air pollutants

CZ-CSN

CSN 46 7013 Cast.3/2-1977 Testing methods for fodder mixtures. Sensory and physical tests. Determination of granularity
CSN 64 0213-1986 Testing of plastics. Determination of granularity
CSN 46 7092-35-1998 Testing methods for feeding stuffs - Part 35: Determination of granularity
CSN 79 3823-1962 Testing of leather. Strength o? the grain side of leather. Key test
CSN 72 1172-1967 Determination of grain size distribution and of grain form of aggregates
CSN 01 5181-1974 Granularity diagram in functional network RRSB
CSN 72 1172 Z3-1997 Particle size determination and corrugated aggregates
CSN 01 5006-1976 Non-destructive magnetlc particle testing. Glossary of terms
CSN 49 0162 Cast.2-1985 Testing of properties of particleboards. Density. Testing method for density rangc in board area
CSN 46 1011-11-2003 Testing of cereals, pulses and oilseeds - Part 11: Testing of cereals - Determination of the rate of grains with reduced vitreousness of durum wheat (Triticum durum)

Korean Agency for Technology and Standards (KATS)

KS D 4121-2009 TESTING METHOD OF CAST SHOT AND GRIT GRAIN SIZE
KS I ISO 10155-2008(2018) Stationary source emissions－Automated monitoring of mass concentrations of particles－Performance characteristics, test methods and specifications
KS I ISO 10155-2023 Stationary source emissions — Automated monitoring of mass concentrations of particles ― Performance characteristics, test methods and specifications
KS L 6524-2013 TESTING METHOD FOR GRAIN SIZE OF COATED ABRASIVE MICROGRITS(P240-P1200)
KS B 4007-2003 TEST CODE FOR PERFORMANCE AND ACCURACY OF LATHES
KS B 5570-2017(2022) Performance test for UV/Vis spectrophotometer
KS B 4070-1981 Test methods for performance and accuracy of circular saw machines
KS B 4070-2001(2011) Test methods for performance and accuracy of circular saw machines
KS L ISO 6344-1:2005 Coated abrasives-Grain size analysis-Part 1:Grain size distribution test
KS A 4048-1995 Measurementing methods of concentration of airborne radioactive particle
KS I 3213-2009(2019) Testing methods for concentration of fine particles in highly purified water
KS M 0107-1993 Testing methods for concentration of fine particles in highly purified water
KS F 2341-1982 Standard method for wet preparation of soil samples for particle size analysis and determination of soil constants
KS F 2341-2007 Standard method for wet preparation of soil samples for particle size analysis and determination of soil constants
KS L 3504-2008(2018) Testing method for grain size of castable refractories
KS B 5570-2017 Performance test for UV/Vis spectrophotometer
KS B 4404-2008 TEST CODE FOR PERFORMANCE AND ACCURACY OF MACHINING CENTERS
KS L 1618-2-2013 Fine ceramics(advanced ceramics, advanced technical ceramics)－Test methods of properties of ceramic granules－Part 2：Bulk density
KS B 4041-2012 Test code for performance and accuracy of turret lathes
KS B 5570-2022 Performance test for UV/Vis spectrophotometer
KS B 4312-2020 Numerically controlled routing machines — Test methods for performance and accuracy
KS B 4204-2010 Test Code for Performance and Accuracy of Numerically controlled Machine Tools
KS B 4907-2013 Test Methods for Performance and Accuracy of Tenoning Machines
KS L ISO 6344-1-2005(2010) Coated abrasives－Grain size analysis－Part 1：Grain size distribution test
KS L 1623-2022 Testing method for compressive strength of fine ceramic granules
KS I 3213-2019 Testing methods for concentration of fine particles in highly purified water
KS C IEC 61853-1-2023 Photovoltaic Module performance testing and energy rating – Part 1: Irradiance and temperature performance measurements and power rating
KS M ISO 3379-2021 Leather－Determination of distension and strength of grain－Ball burst test

European Committee for Standardization (CEN)

EN 13205:2001 Workplace Atmospheres - Assessment of Performance of Instruments for Measurement of Airborne Particle Concentrations
FprEN 1097-6-2021 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations
EN 1097-6:2022 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
EN 13205-2:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency
EN 1097-7:2022 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
PREN 1097-7-2020 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
EN 933-1:1997 Tests for Geometrical Properties of Aggregates - Part 1: Determination of Particle Size Distribution - Sieving Method including amendment A1:2005
EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
EN 1097-7:1999 Tests for Mechanical and Physical Properties of Aggregates - Part 7: Determination of the Particle Density of Filler - Pyknometer Method
EN 1367-2:2009 Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test
EN 933-1:2012 Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates
EN 1097-2:2010 Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
prEN 933-1-2021 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
EN 13205-6:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests

German Institute for Standardization

DIN EN 933-1:2006 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method; English version of DIN EN 933-1:1997 + A1:2005
DIN EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method; German version EN 933-1:2012
DIN EN 13205-4:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations; German version EN 13205-4:2014
DIN EN 933-1:1997 Test for geometrical properties of aggregates — Part 1: Determination of particle size distribution — Granulometric analysis, Sieving method
DIN EN 1097-6:2022 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
DIN EN 1097-6:2022-05 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German version EN 1097-6:2022
DIN EN 1097-6:2001 Tests for mechanical and physical properties of aggregates — Part 6: Determination of particle density and water absorption
DIN EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids; German version EN 1097-3:1998
DIN EN 933-1 E:2021-07 Test for geometrical properties of aggregates — Part 1: Determination of particle size distribution — Granulometric analysis, Sieving method
DIN EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations; German version EN 13205:2001
DIN EN 1097-6:2020 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German and English version prEN 1097-6:2020
DIN EN 1097-6:2005 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German version EN 1097-6:2000 + AC:2002 + A1:2005
DIN EN 1097-7:2022-12 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method; German version EN 1097-7:2022
DIN EN 932-2:1999 Test for general properties of aggregates - Part 2: Methods for reducing laboratory samples; German version EN 932-2:1999
DIN EN 13205-2:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency; German version EN 13205-2:2014
DIN EN 1097-7:2022 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
DIN EN 1097-7:1999 Tests for mechanical and physical properties of aggregates — Part 7: Determination of the particle density of filler — Pycnometer method
DIN EN 1097-6 E:2010-06 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
DIN EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method; English version of DIN EN 1097-7:2008-06
DIN EN 1097-7:2020 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method; German and English version prEN 1097-7:2020
DIN EN 13205-4 E:2012-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations
DIN EN 933-9:1998 Tests for geometrical properties of aggregates - Part 9: Assessment of fines; methylene blue test; German version EN 933-9:1998
DIN EN 13205-6:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests; German version EN 13205-6:2014
DIN 53325:1974 Testing of leather; ball compression test for determination of grain expansion capacity and the force of fracture with the lastometer
DIN ISO 9136-2:2000 Abrasive grains - Determination of bulk density - Part 2: Microgrits (ISO 9136-2:1999)
DIN ISO 6344-1:2000 Coated abrasives - Grain size analysis - Part 1: Grain size distribution test (ISO 6344-1:1998)
DIN 54407:2015 Testing of ion exchange resins - Determination of bead size distribution
DIN 54407:2003 Testing of ion exchange resins - Determination of bead size distribution
DIN 18123:2011 Soil, investigation and testing - Determination of grain-size distribution
DIN EN 1367-2:1998 Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test
DIN 51103:1975 Testing of ceramic materials; determination of the alkali resistance, method with grained test material
DIN EN 933-1:2021-07 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method; German and English version prEN 933-1:2021 / Note: Date of issue 2021-06-11*Intended as replacement for DIN EN 933-1 (2012-03).
DIN EN 13205-2 E:2012-10 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency
DIN EN 933-1:2012-03 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method; German version EN 933-1:2012 / Note: To be replaced by DIN EN 933-1 (2021-07).
DIN EN 1097-6 Berichtigung 1:2008 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption; German version EN 1097-6:2000 + AC:2002 + A1:2005, Corrigendum to DIN EN 1097-6:2005-12

Spanish Association for Standardization (UNE)

UNE 43751:1978 GLASS RAW MATERIALS. GRANULOMETRIC TEST
UNE 77219:1998 ERRATUM:2009 Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications.
UNE 77219:1998 STACIONARY SOURCE EMISSIONS. AUTOMATED MONITORING OF MASS CONCENTRATIONS OF PARTICLES. PERFORMANCE CHARACTERISTICS, TEST METHODS AND SPECIFICATIONS.
UNE-EN 1097-6:2014 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
UNE 43751:1978 ERRATUM GLASS RAW MATERIALS. GRANULOMETRIC TEST
UNE-EN 13205-4:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations
UNE-EN 1097-6:2001 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES. PART 6: DETERMINATION OF PARTICLE DENSITY AND WATER ABSORPTION.
UNE 56919:1990 GRANULATED CORK. BULK DENSITY TEST.
UNE-EN 1097-7:2009 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
UNE-EN 1097-7:2000 TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES. PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER. PYKNOMETER METHOD.
UNE-EN 13205-2:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency
UNE-EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations.
UNE-EN 13205-6:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests
UNE-EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
UNE-EN 933-2:2022 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
UNE-EN 933-2/1M:1999 TEST FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION. TEST SIEVES, NOMINAL SIZE OF APERTURES.
UNE-EN 933-2:1996 TEST FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION. TEST SIEVES, NOMINAL SIZE OF APERTURES.

Lithuanian Standards Office

LST EN 1097-6-2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
LST ISO 10155:2001 Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications
LST EN 1097-6+AC-2003 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
LST EN 1097-6+AC-2003/A1-2005 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
LST EN 1097-7-2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
LST EN 13205-2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
LST ISO 10155:2001/AC1:2003 Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications (idt ISO 10155:1995/Cor.1:2002)
LST EN 933-1-2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method

IN-BIS

IS 8122 Pt.2-1981 Combine harvester threshing machine test specification part Ⅱ performance test
IS 10960 Pt.2-1984 Particle size of diamond or cubic boron nitride Part 2 Test method for coarse particle size
IS 2720 Pt.4-1986 Soil Testing Methods Part 4 Particle Size Analysis
IS 2720 Pt.4-1985 Soil Testing Methods Part 4 Particle Size Analysis

GOST

GOST R 70378.4-2023 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Part 4. Laboratory performance test based on comparison of concentrations
GOST R 70378.2-2023 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Part 2. Laboratory performance test based on determination of sampling efficiency

Danish Standards Foundation

DS/ISO 10155:1996 Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications
DS/ISO 10155/Corr.1:2002 Stationary source emissions - Automated monitoring of mass concentrations of particles - Performance characteristics, test methods and specifications
DS/EN 1097-6:2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
DS/EN 1097-7:2008 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
DS/EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
DS/EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method

Indonesia Standards

SNI 7543-2009 Animal feed pelletizer (pelletizer). Performance and test methods
SNI 7428-2008 Corn shellers machines - Performance and testing methods
SNI 05-1202-1989 Trial tests for performance and accuracy of machine tools
SNI 07-1348-1989 Magnetic particles, Dry test method
SNI 05-2930-1992 Machine tools, Geometric test for performance and accuracy
SNI 07-1347-1989 Magnetic particles, Wet test method
SNI 07-1346-1989 Magnetic particles, Definition and terminology of test

American Society of Mechanical Engineers (ASME)

ASME PTC 28-1965 Determining the properties of fine particulate matter

GSO

GSO ISO 6344-1:2013 Coated abrasives -- Grain size analysis -- Part 1: Grain size distribution test
GSO EN 1097-6:2024 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
GSO EN 1097-7:2024 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
GSO ISO/TR 29381:2013 Metallic materials -- Measurement of mechanical properties by an instrumented indentation test -- Indentation tensile properties
GSO ISO/TS 17892-4:2014 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
GSO ISO/TS 17892-2:2014 Geotechnical investigation and testing -- Laboratory testing of soil -- Part 2: Determination of density of fine-grained soil
BH GSO ISO 6344-1:2016 Coated abrasives -- Grain size analysis -- Part 1: Grain size distribution test
OS GSO ISO 6344-1:2013 Coated abrasives -- Grain size analysis -- Part 1: Grain size distribution test
GSO EN 933-1:2021 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
BH GSO ASTM D1415:2022 Standard Test Method for Rubber Property—International Hardness
GSO ISO 8840:2015 Refractory materials -- Determination of bulk density of granular materials (grain density)

American National Standards Institute （ANSI)

ANSI/ASME PTC19.3-1974 Performance Test Code - Temperature Measurement
ANSI B74.19-2002 Test for Determining Magnetic Content of Abrasive Grains

YU-JUS

JUS U.B1.018-1980 Testing ofsoils. Determination ofparticle si?e distribution
JUS B.B8.031-1982 Crushed aggregate. Determination of particle density and water absorption

Japanese Industrial Standards Committee (JISC)

JIS G 1641:1985 Methods of sampling for size analysis of ferroalloys and size determination
JIS K 6219:1997 Testing methods of properties of pellets of carbon black for rubber industry
JIS K 6219-4:2006 Carbon black for rubber industry -- Characteristics of pelletized carbon black -- Part 4: Determination of pellet size distribution
JIS G 5904:1966 Testing method of cast shot and grit grain size
JIS R 1620:1995 Testing methods for particle density of fine ceramic powder
JIS R 6002:1987 Testing methods for abrasive grain size
JIS G 1641:1998 Methods of sampling for size analysis of ferroalloys and size determination
JIS B 6159:1998 Universal dividing head -- Testing of accuracy

AT-ON

ONORM A 5482 Teil.2-1981 Packaging testing; Performance fest schedules for transport packages; Intensities of test
ONORM A 5482 Teil.1-1981 Packaging testing; Performance testing schedules for transport packages; principles
OENORM EN 933-1-2021 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method

PL-PKN

PN C87060-03-1987 Fertilizers Determination of physical properties of powder and crystalline fertilizers Determination of size composition
PN Z04002 Arkusz 04-1974 Air purity protection Tests of dust physical properties Determination of static surface and statical surface dimension and pores dimension of dust particles

SE-SIS

SIS SS 13 21 14-1978 Concrete testing — Aggregate — Grain density
SIS 65 00 43-1959 Determination of stiffness properties in tissues. experiment method

Standard Association of Australia （SAA）

AS 1733:1976 Methods for the determination of grain size in metals
AS 4350.1:1995 Heavy mineral sand concentrates - Physical testing - Size analysis
AS 2853:1986 Enclosures - Temperature-controlled - Performance testing and grading
AS 5213:2019 Density tracer testing for measuring performance of coal density separators

KR-KS

KS L 3504-2008(2023) Testing method for grain size of castable refractories
KS C IEC 61853-1-2013(2023) Photovoltaic Module performance testing and energy rating – Part 1: Irradiance and temperature performance measurements and power rating

BE-NBN

NBN B 11-255-1976 Light aggregate test. Particle density and water absorption

SAE - SAE International

SAE J1812-1996 Function Performance Status Classification for EMC Immunity Testing
SAE J1812-1995 Function Performance Status Classification for EMC Immunity Testing
SAE J1812-2007 Function Performance Status Classification for EMC Immunity Testing
SAE J1812-1988 Function Performance Status Classification for EMC Susceptibility Testing of Automotive Electronic and Electrical Devices
SAE J1812-2018 Function Performance Status Classification for EMC Immunity Testing

Society of Automotive Engineers (SAE)

SAE J1812-2003 Function Performance Status Classification for EMC Immunity Testing

IT-UNI

UNI 4869-1961 Wood particle panel testing. Thickness measurement
UNI 4871-1961 Wood particle panel testing. Humidity content determination

PT-IPQ

NP EN 1290-2000 Non-destructive examination of welds Magnetic particle examination of welds

RU-GOST R

GOST R 55961-2014 Activated carbon. Standard test method for particle size distribution
GOST ISO 3378-2014 Leather. Determination of resistance to cracking to grain layer of Flexural and tensile strength of the grain layer

The American Road & Transportation Builders Association

AASHTO T 88-2013 Standard Method of Test for Particle Size Analysis of Soils
AASHTO T 88-2020 Standard Method of Test for Particle Size Analysis of Soils
AASHTO T 88-2010 Standard Method of Test for Particle Size Analysis of Soils
AASHTO T 219-87(R2018) Standard Method of Test for Testing Lime for Chemical Constituents and Particle Sizes

AASHTO - American Association of State Highway and Transportation Officials

T 88-2013 Standard Method of Test for Particle Size Analysis of Soils
T88-1993 Standard Method of Test for Particle Size Analysis of Soils
T 88-2010 Standard Method of Test for Particle Size Analysis of Soils
T 88-2000 Standard Method of Test Particle Size Analysis of Soils
T 219-1987 Standard Method of Test for Testing Lime for Chemical Constituents and Particle Sizes

CEN - European Committee for Standardization

EN 1367-2:1998 Tests for Thermal and Weathering Properties of Aggregates - Part 2: Magnesium Sulfate Test
PREN 13205-2010 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations

(U.S.) Ford Automotive Standards

FORD FLTM BO 004-01-2001 PARTICLE SIZE TEST FOR RESINS