Microcavity Observation

Microcavity Observation, Total:213 items.

The international standard classification for "Microcavity Observation" includes: Geology. Meteorology. Hydrology , Ophthalmic equipment , Surgical instruments and materials , Crude petroleum , Birth control. Mechanical contraceptives , Chemical analysis , Electrical and electronic testing , Respiratory protective devices , Services in general , Powder metallurgy , Rubber .

The Chinese standard classification for "Microcavity Observation" includes: Meteorology , Medical optical instrument and endoscope , General and microsurgical devices , Crude petroleum , Other special devices , Industrial gas and chemical gas , Articles for labor protection , Social and public safety in general , Technical Management , Metallographic testing method , Synthetic rubber .

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34415-2017 Cavity ring-down spectroscopy system for measurement of atmospheric carbon dioxide
GB/T 33672-2017 Cavity Ring-Down Spectroscopy system for measurement of atmospheric methane

Professional Standard - Medicine

YY 0672.2-2011 Endoscopy instruments—Part 2:Laparoscopy scissors
YY/T 0672.2-2011 Endoscopy instruments―Part 2:Laparoscopy scissors
YY 1075-2007 Rigid hysteroscope
YY/T 0864-2011 Medical endoscopes.Endoscope functional supply units.Irrigation pump

未注明发布机构

DIN 19410 E:2017-06 Dentistry - Intraoral camera
ISO 643:2019/Amd 1:2020 Steels — Micrographic determination of the apparent grain size
JIS T 5916:2024 Dentistry -- Intraoral camera
DIN EN ISO 643 E:2015-06 Photomicrographic determination of apparent grain size of steel (draft)
DIN EN ISO 23450:2021 Dentistry - Intraoral camera
DIN EN ISO 18556 E:2015-02 Dental Intraoral Tongue Depressor (Draft)
DIN EN 1321:1996 Destructive testing of welded joints on metallic materials. Macroscopic and microscopic examinations

Professional Standard - Petroleum

SY/T 0521-2008 Determination of wax appearance temperature in crude petroleum-Test method by microscopic observation
SY 0521-2008 Microscopic observation method for determination of wax precipitation point of crude oil
SY/T 0521-1993 Microscopic Observation Method for Determination of Wax Precipitation Point of Crude Oil

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 7265.2-1987 Test method for the complex permittivity of solid dielectric materials at microwave frequencies;
GB 11234-1995 Uterine cavity form intrauterine devices
GB 11234-2006 Uterine cavity form intra-uterine devices
GB/T 5832.3-2011 Determination of moisture in gases—Part 3:The method of Cavity Ring-Down Spectroscopy
GB/T 7265.2-1987 Test method for the complex permittivity of solid dielectric materials at microwave frequencies--
GB/T 6224.3-1986 Test method for the dead space of filtering particle respirator

未注明发布机构

ISO 643:2019/Amd 1:2020 Steels — Micrographic determination of the apparent grain size
DIN EN 1321:1996 Destructive testing of welded joints on metallic materials. Macroscopic and microscopic examinations
DIN EN ISO 23450:2021 Dentistry - Intraoral camera
DIN 19410 E:2017-06 Dentistry - Intraoral camera
DIN EN ISO 643 E:2015-06 Photomicrographic determination of apparent grain size of steel (draft)
JIS T 5916:2024 Dentistry -- Intraoral camera
DIN EN ISO 18556 E:2015-02 Dental Intraoral Tongue Depressor (Draft)

Group Standards of the People's Republic of China

T/CSTM 00751-2022 Measurement of dielectric properties of solid-state dielectric materials in microwave frequency range—The closed cavity method
T/CAMS /CICEIA109-2022 Internal combustion engine — Plastics housing thermostat assemblies
T/CIET 246-2023 Quality requirements for oral micro-ecological regulating products
T/CSIQ 3101-2015 Stereo microscope method for testing surface microstructure of ceramic works of art
T/CSIQ 3103-2015 X-ray computed tomography method for testing the internal microstructure of ceramic works of art
T/CSTM 00563-2022 Determination of microplastics in scenic environment use water —Fourier transform infrared microspectroscopy
T/ZZB 0820-2018 High definition rigid intraperitoneal endoscopes

Professional Standard - Energy

NB/SH/T 6022-2020 Water-based anti-corrosion cavity wax for motor vehicle

Professional Standard - Aerospace

QJ 2507-1993 Test method for microstructural parameters of carbon materials

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 4547-2023 Specification of naikan therapy for drug rehabilitation
DB32/T 1853-2011 Determination method of cold resistance of indoor foliage plants

Professional Standard - Aviation

HBm 66.18-1988 Mini-truck - Tandem Double-cavity Brake Master Cylinder

中国气象局

QX/T 429-2018 Greenhouse gases—Observation specification for carbon dioxide and methane—Off-axis integrated cavity output spectroscopy method

Tianjin Provincial Standard of the People's Republic of China

DB12/T 804-2018 Microbiological Standards for Water in Dental Comprehensive Treatment Units

民政部

MZ/T 177-2021 General requirements for prosthetic liner

Professional Standard - Electron

SJ/T 10143-1991 Test methods for complex permittivity of solid dielectric in microwave frequency band - Method for reentering into gravity

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40067-2021 Microstructure and defect determination of tungsten carbide powder

Professional Standard - Petrochemical Industry

SH/T 1727-2004 Butadiene rubber - Determination of microstructure by infra - red spectrometry
SH/T 1727-2017 Determination of Microstructure of Butadiene Rubber by Infrared Spectroscopy

Professional Standard - Meteorology

QX/T 91-2008 Observation methods of indoor microclimate. air temperature, relative humidity and indoor-outdoor-air temperature difference

Military Standard of the People's Republic of China-General Armament Department

GJB 5695-2006 General specification for low light level observation scope

Association Francaise de Normalisation

NF EN ISO 23450:2021 Médecine bucco-dentaire - Caméra intrabuccale
NF EN 60705:2015 Microwave ovens for domestic use - Methods for measuring fitness for function
NF EN 60705/A2:2018 Microwave ovens for domestic use - Methods for measuring fitness for function
NF S91-450*NF EN ISO 23450:2021 Dentistry - Intraoral camera
NF X43-404-25*NF ISO 16000-25:2011 Indoor air - Part 25 : determination of the emission of semi-volatile organic compounds for building products - Micro-chamber method.
NF A04-102:2003 Steels - Micrographic determination of the apparent grain size.
NF A04-102:2013 Steels - Micrographic determination of the apparent grain size
NF A04-102*NF EN ISO 643:2020 Steels - Micrographic determination of the apparent grain size
NF EN 14119:2004 Textile testing - Evaluation of the action of microscopic fungi
NF EN ISO 22598:2020 Oral medicine - Shade plates for intraoral tooth shade determination
NF ISO 12965:2016 Butadiene rubber - Determination of microstructure by infrared spectrometry
NF EN ISO 17639:2022 Essais destructifs des soudures sur matériaux métalliques - Examens macroscopique et microscopique des assemblages soudés
NF ISO 9136-2:1999 Abrasive grains - Determination of apparent density - Part 2: micrograins
NF S91-015:1999 Intrabuccal digitized image radiographic prints.
NF EN ISO 14801:2016 Oral medicine - Implants - Dynamic load testing for endosseous dental implants
NF A95-186-1*NF EN ISO 4499-1:2020 Hardmetals - Metallographic determination of microstructure - Part 1 : photomicrographs and description
NF A95-186-3*NF EN ISO 4499-3:2016 Hardmetals - Metallographic determination of microstructure - Part 3 : measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals
NF T46-063*NF ISO 12965:2016 Butadiene rubber - Determination of microstructure by infra-red spectrometry

KR-KS

KS P ISO 9873-2018 Dentistry — Intra-oral mirrors
KS P ISO 9873-2021 Dentistry — Intra-oral mirrors
KS P ISO 23450-2022 Dentistry — Intraoral camera
KS P ISO 22598-2021 Dentistry — Colour tabs for intraoral tooth colour determination

VN-TCVN

TCVN 4107-1985 Outside micrometers.Cavity micrometers.Basic dimensions
TCVN 5052-1-2009 Hardmetals.Metallographic determination of microstructure.Part 1: Photomicrographs and description

International Organization for Standardization (ISO)

ISO 9873:2017 Dentistry - Intra-oral mirrors
ISO 9873:2019 Dentistry — Intra-oral mirrors
ISO 23450:2021 Dentistry - Intraoral camera
ISO 18556:2016 Dentistry - Intraoral spatulas
ISO/DIS 643:2023 Steels — Micrographic determination of the apparent grain size
ISO/CD 643 Steels — Micrographic determination of the apparent grain size
ISO 22598:2020 Dentistry — Colour tabs for intraoral tooth colour determination
ISO 17639:2003 Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds
ISO 12965:2000 Butadiene rubber - Determination of microstructure by infra-red spectrometry
ISO 8600-3:1997 Optics and optical instruments - Medical endoscopes and endoscopic accessories - Part 3: Determination of field of view and direction of view of endoscopes with optics
ISO 5837-2:1980 Implants for surgery; Intramedullary nailing systems; Part 2 : Medullary pins
ISO 21561:2005 Styrene-butadiene rubber (SBR) - Determination of the microstructure of solution-polymerized SBR

British Standards Institution (BSI)

BS EN ISO 9873:2019 Dentistry. Intra-oral mirrors
BS ISO 16000-25:2011 Indoor air. Determination of the emission of semi-volatile organic compounds by building products. Micro-chamber method
BS EN ISO 23450:2021 Dentistry. Intraoral camera
BS EN ISO 18556:2016 Dentistry. Intraoral spatulas
BS EN ISO 643:2020 Steels. Micrographic determination of the apparent grain size
BS EN ISO 643:2012 Steels. Micrographic determination of the apparent grain size
20/30380661 DC BS EN ISO 23450. Dentistry. Intraoral camera
BS EN ISO 22598:2020 Dentistry. Colour tabs for intraoral tooth colour determination
BS 748:1982 Specification for haemacytometer and particle counting chambers
20/30420698 DC BS EN ISO 17639. Destructive tests on welds in metallic materials. Macroscopic and microscopic examination of welds
17/30363662 DC BS EN ISO 643 Steels. Micrographic determination of the apparent grain size
23/30464953 DC BS EN ISO 643. Steels. Micrographic determination of the apparent grain size
BS PD ISO/TR 945-3:2016 Microstructure of cast irons. Matrix structures
BS ISO 12965:2000 Butadiene rubber - Determination of microstructure by infra-red spectrometry
BS ISO 21561:2005+A1:2010 Styrene-butadiene rubber (SBR). Determination of the microstructure of solution-polymerized SBR

SCC

DANSK DS/ISO 9873:2019 Dentistry – Intra-oral mirrors
DANSK DS/ISO 23450:2021 Dentistry – Intraoral camera
BS EN ISO 643:2003 Steels. Micrographic determination of the apparent grain size
DANSK DS/ISO 643:2020 Steels – Micrographic determination of the apparent grain size
DIN 19410 E:2017 Draft Document - Dentistry - Intraoral camera
NS-EN ISO 23450:2021 Dentistry - Intraoral camera (ISO 23450:2021)
DANSK DS/EN ISO 23450:2021 Dentistry – Intraoral camera (ISO 23450:2021)
CEI 46-13:1998 Radio frequency cables - General requirements and tests for single coaxial cables for use in cable distribution systems
UNE-EN ISO 643:2004 Steels - Micrographic determination of the apparent grain size (ISO 643:2003)
NS-EN ISO 643:2012 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)
NS-EN ISO 643:2003 Steels - Micrographic determination of the apparent grain size (ISO 643:2003)
DANSK DS/EN ISO 643:2020 Steels – Micrographic determination of the apparent grain size (ISO 643:2019)
UNE-EN 24499:2001 HARDMETALS. METALLOGRAPHIC DETERMINATON OF MICROSTRUTURE. (ISO 4499:1978).
AENOR UNE-EN ISO 10370:2015 Petroleum products. Determination of the carbon residue. Micro-method. (ISO 10370:2014).
DANSK DS/EN ISO 4499-3:2016 Hardmetals - Metallographic determination of microstructure - Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals
DANSK DS/ISO 4499-1:2020 Hardmetals – Metallographic determination of microstructure – Part 1: Photomicrographs and description

Korean Agency for Technology and Standards (KATS)

KS P ISO 9873:2018 Dentistry — Intra-oral mirrors
KS B 5236-1999(2019) Microindicators
KS B 5236-2019 Microindicators
KS P ISO 9873:2021 Dentistry — Intra-oral mirrors
KS P ISO 22598:2021 Dentistry — Colour tabs for intraoral tooth colour determination
KS P ISO 5837-2:2010 Implants for surgery－Intramedullary nailing systems－Part 2：Medullary pins
KS M ISO 12965-2022 Butadiene rubber－Determination of microstructure by infra－red spectrometry
KS M ISO 12965-2007(2022) Butadiene rubber－Determination of microstructure by infra－red spectrometry
KS X 5912-2009(2020) Density of silver-gelatin type microfilms for micrographics
KS M ISO 12965:2007 Butadiene rubber－Determination of microstructure by infra－red spectrometry
KS B ISO 8600-3:2006 Optics and optical instruments－Medical endoscopes and endoscopic accessories－Part 3：Determination of field of view and direction of view of endoscopes with optics

IT-UNI

UNI EN ISO 23450:2021 Dentistry - Intraoral camera
UNI 3493-1954 Microscopic examination of lead. preparation
UNI 3652-1965 Microscopic examination of ferrous materials. Macrophotographic method for sulfide partitioning measurement. According to Baumann
UNI EN ISO 22598:2021 Dentistry - Colour tabs for intraoral tooth colour determination
UNI 5683-1969 Microscopic examination of ferrous materials. Determination of the presence and distribution of lead. Macrophotography method. According to Wragge

Japanese Industrial Standards Committee (JISC)

JIS G 0551:2020 Steels -- Micrographic determination of the apparent grain size
JIS G 0551:2013 Steels.Micrographic determination of the apparent grain size
JIS G 0551:2005 Steels -- Micrographic determination of the apparent grain size
JIS K 6239:2007 Rubber, raw, S-SBR -- Determination of the microstructure
JIS T 3229:2011 Single use puncture needle for internal organs and abdominal cavity
JIS T 3229:2005 Single use puncture needle for internal organs and abdominal cavity

GSO

BH GSO ISO 23450:2023 Dentistry — Intraoral camera
GSO ISO 23450:2023 Dentistry — Intraoral camera
GSO ISO 17639:2008 Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds
GSO ISO 21561:2014 Styrene-butadiene rubber (SBR) -- Determination of the microstructure of solution-polymerized SBR
BH GSO ISO 4499-3:2022 Hardmetals — Metallographic determination of microstructure — Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals
GSO ISO 4499-3:2021 Hardmetals — Metallographic determination of microstructure — Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals
OS GSO ISO 21561:2014 Styrene-butadiene rubber (SBR) -- Determination of the microstructure of solution-polymerized SBR

ES-UNE

UNE-EN ISO 23450:2021 Dentistry - Intraoral camera (ISO 23450:2021)
UNE-EN ISO 4499-3:2016 Hardmetals - Metallographic determination of microstructure - Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals (ISO 4499-3:2016)
UNE-EN ISO 4499-1:2021 Hardmetals - Metallographic determination of microstructure - Part 1: Photomicrographs and description (ISO 4499-1:2020)

HU-MSZT

MSZ 16341-1955 Printing dot microscopic ruler microscopic ruler. Printing point calculation form
MSZ 9656-1981 Surface Microgeometry Detection Methods
MSZ 450/2-1977 Definition of drinking water quality. Microbiological testing
MSZ 6575/15-1982 Coating surface inspection. Multilayer thickness content, microscopic
MSZ 6699-1957 Microscopic inspection of cover plate

Danish Standards Foundation

DS/ISO 23450:2021 Dentistry – Intraoral camera
DS/EN ISO 23450:2021 Dentistry – Intraoral camera (ISO 23450:2021)
DS/EN ISO 643:2013 Steels - Micrographic determination of the apparent grain size
DS/ISO 5837/2:1983 Implants for surgery. Intramedullary nailing systems. Part 2: Medullary pins

Defense Logistics Agency

DLA A-A-54474-1991 MICROSCOPE, SURGICAL (CO-OBSERVATION, BINOCULAR)

European Committee for Standardization (CEN)

EN ISO 23450:2021 Dentistry - Intraoral camera (ISO 23450:2021)
EN 1321:1996 Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds
EN ISO/TR 16060:2014 Destructive tests on welds in metallic materials - Etchants for macroscopic and microscopic examination
EN ISO 22598:2020 Dentistry - Colour tabs for intraoral tooth colour determination (ISO 22598:2020)
EN ISO 643:2003 Steels - Micrographic determination of the apparent grain size ISO 643: 2003
prEN ISO 643 Steels - Micrographic determination of the apparent grain size (ISO/DIS 643:2023)

German Institute for Standardization

DIN 19410:2018 Dentistry - Intraoral camera
DIN EN ISO 643:2020-06 Steels - Micrographic determination of the apparent grain size (ISO 643:2019, Corrected version 2020-03); German version EN ISO 643:2020
DIN EN ISO 643:2003 Steels - Micrographic determination of the apparent grain size (ISO 643:2003); German version EN ISO 643:2003
DIN EN ISO 23450:2021-07 Dentistry - Intraoral camera (ISO 23450:2021); German version EN ISO 23450:2021
DIN EN ISO 23450:2020 Dentistry - Intraoral camera (ISO/DIS 23450:2020); German and English version prEN ISO 23450:2020
DIN SPEC 91284:2012 Principles of microscopic evacuation analyses
DIN EN ISO 643:2023 Steels - Micrographic determination of the apparent grain size (ISO/DIS 643:2023); German and English version prEN ISO 643:2023
DIN EN ISO 643:2023-08 Steels - Micrographic determination of the apparent grain size (ISO/DIS 643:2023); German and English version prEN ISO 643:2023 / Note: Date of issue 2023-07-07*Intended as replacement for DIN EN ISO 643 (2020-06).
DIN EN ISO 4499-3:2016-10 Hardmetals - Metallographic determination of microstructure - Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals (ISO 4499-3:2016); German version EN ISO 4499-3:2016
DIN ISO 8600-3:2004 Optics and optical instruments - Medical endoscopes and endoscopic accessories - Part 3: Determination of field of view and direction of view of endoscopes with optics (ISO 8600-3:1997 + AMD 1:2003)
DIN EN ISO 643:2017 Steel - Micrographic determination of the apparent grain size (ISO/DIS 643:2017); German and English version prEN ISO 643:2017

PL-PKN

PN T06561-1971 Microwave measuring instruments Cavity wavemeter General requirements and tests
PN-EN ISO 23450-2021-09 E Dentistry -- Intraoral camera (ISO 23450:2021)
PN R04014-1991 Agrochemical plant analyse. Methods of mineralization of plant material for determination macro- and microelements
PN R64754-1972 Feedstu?fs Microscopic examinalion of industrial feeds?ut?

RU-GOST R

GOST R ISO 643-2011 Steels. Micrographic determination of the apparent grain size
GOST R ISO 643-2015 Steels. Micrographic determination of the apparent grain size
GOST 32392-2013 Petroleum products. Determination of carbon residue by micro method
GOST R 53853-2010 Poultry meat. Methods of histological and microscopic analysis

RO-ASRO

STAS 8264/2-1983 HARD METALS etallographic determination of microstructure

American Society for Testing and Materials (ASTM)

ASTM D8075-16(2021) Standard Guide for Categorization of Microstructural and Microtextural Features Observed in Optical Micrographs of Graphite
ASTM D8075-16 Standard Guide for Categorization of Microstructural and Microtextural Features Observed in Optical Micrographs of Graphite
ASTM E1197-87(1998) Standard Guide for Conducting a Terrestrial Soil-Core Microcosm Test
ASTM E1197-12(2021) Standard Guide for Conducting a Terrestrial Soil-Core Microcosm Test

Lithuanian Standards Office

LST EN ISO 23450:2021 Dentistry - Intraoral camera (ISO 23450:2021)
LST EN ISO 643:2013 Steels - Micrographic determination of the apparent grain size (ISO 643:2012)

AT-ON

OENORM EN ISO 23450:2021 Dentistry - Intraoral camera (ISO 23450:2021)
ONORM ISO 7368:1990 Hydraulic fluid power; two-port slip-in cartridge valves; cavities

YU-JUS

JUS E.B8.034-1978 Specification of wheat for milling industry. Determination of raw protein content macro-micro method according to Kjeldahl

GOSTR

GOST R 57180-2016 Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure

CH-SNV

SN EN ISO 23450:2021 Dentistry - Intraoral camera (ISO 23450:2021)

CZ-CSN

CSN 42 0892 Cast.10-1983 Testing of sintered carbides Determlnation of microstructure
CSN 25 1430-1974 Inside micrometer callipers

American National Standards Institute （ANSI)

ANSI/ASTM E1842:1996 Test Method for Macro-Rockwell Hardness Testing of Metallic Materials

Society of Automotive Engineers (SAE)

SAE AS1814C-2007 Terminology for Titanium Microstructures

BE-NBN

NBN G 51-001-1990 Textiles - Evaluation of maturity of cotton fibres - Microscopic method

IN-BIS

IS 11959-1987 Metallographic determination method of cemented carbide microstructure
IS 3600 Pt.9-1985 Test methods for fusion joints and weld metal in steel Part 9 Macroscopic and microscopic examination

AR-IRAM

IRAM 120-1958 Microscopic tests on iron-containing raw materials

Indonesia Standards

SNI 13-4117-1996 Polished specimen preparation for ore microscopic

International Telecommunication Union (ITU)

ITU-T P.54 FRENCH-1988 SOUND LEVEL METERS (APPARATUS FOR THE OBJECTIVE MEASUREMENT OF ROOM NOISE)
ITU-T P.54-1988 SOUND LEVEL METERS (APPARATUS FOR THE OBJECTIVE MEASUREMENT OF ROOM NOISE)
ITU-T P.54 SPANISH-1988 SOUND LEVEL METERS (APPARATUS FOR THE OBJECTIVE MEASUREMENT OF ROOM NOISE)