High and low temperature test plastic

High and low temperature test plastic, Total:235 items.

The international standard classification for "High and low temperature test plastic" includes: Reinforced plastics , Hoses and hose assemblies , Coated fabrics , Equipment for the chemical industry , Environmental testing , Energy and heat transfer engineering in general , Rubber , Photographic equipment. Projectors .

The Chinese standard classification for "High and low temperature test plastic" includes: Fibre reinforced composites , Rubber tube, rubber belt and tape , Non-metal chemical machinery equipment , Basic standards and general methods , Basic laboratory equipment , Technical management , Basic standards and general methods , Rubber products in general , Technical management , Camera and photograph instrument , Railway signals in general .

未注明发布机构

FORD FLTM BO 151-2-2001 LOW TEMPERATURE IMPACT TEST FOR PLASTICS
FORD FLTM BO 151-02-2001 LOW TEMPERATURE IMPACT TEST FOR PLASTICS

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 10592-2023 Specifications for high/low temperature testing chambers
GB/T 9979-2005 rule of test for mechanical properties of fiber - Reinforced plastics at elevated and reduced temperatures
GB/T 2423.63-2019 Environmental testing—Part 2:Test methods—Test:combined temperature(cold and heat)/low air pressure/vibration(mixed mode)
GB/T 23711.2-2009 Low temperature test method for pressure vessels lined with fluoroplastics
GB/T 10591-1989 Specification for high temperature/low air pressure test chambers
GB/T 9868-1988 Rubber-General directions for achieving elevated or subnormal temperatures for test purposes
GB/T 39933-2021 Rotational moulding—Test method for low temperature impact
GB/T 5565.3-2017 Rubber and plastics hoses and tubing--Measurement of flexibility and stiffness--Part 3: Bending tests at high and low temperatures
GB/T 18426-2021 Rubber-or plastics-coated fabrics—Low-temperature bend test
GB/T 9979-1988 Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reduced temperatures
GB/T 10592-2008 Specification for low/high temperature test chambers
GB/T 10590-2006 Specifications for high and low temperature/low air pressure testing chambers
GB/T 2424.24-1995 Basic environmental testing procedures for electric and electronic products Guidance for combined temperature(cold and heat)/low air pressure/vibration (sinusoidal)test
GB/T 10591-2006(英文版) Specifications for high temperature/low air pressure testing chambers
GB/T 5564-1994 Rubber and plastics hoses－Subambient temperature flexibility tests
GB/T 10592-1989 Specification for low/high temperature test chambers
GB/T 12584-2008 Rubber or plastics coated fabrics - Low-temperature impact test
GB/T 23711.3-2009 High temperature test method for pressure vessels lined with fluoroplastics
GB/T 2424.1-2005 Environmental testing for electric and electronic products - Guidance for high temperature and low temperature tests
GB/T 10590-2006(英文版) Specifications for high and low temperature/low air pressure testing chambers
GB/T 2424.1-1989 Basic environmental testing procedures for electric and electronic products Guidance for high temperature and low temperature tests
GB/T 33861-2017 Testing method of energy efficiency for temperature test chambers
GB/T 10591-2006 Specifications for high temperature/low air pressure testing chambers
GB/T 23711.3-2019 Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection
GB/T 33861-2017(俄语版) Energy efficiency test method for high and low temperature test chambers
GB/T 23711.2-2019 Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing
GB/T 2423.102-2008 Environmental testing for electric and electronic products - Part 2: Test methods - Test: combined temperature (cold and heat)/low air pressure/vibration (sinusoidal)
GB/T 12584-2001 Rubber or plastics coated fabrics--Low-temperature impact test
GB/T 5564-2006 Rubber and plastics hoses - Subambient temperature flexibility tests
GB/T 33861-2017(法语版) Energy efficiency test method for high and low temperature test chambers
GB/T 18426-2001 Rubber or plastics-coated fabrics - Low - Temperature bend test

Professional Standard - Chemical Industry

HG/T 2-163-1965 Plastic low temperature elongation test method
HG/T 3613-1999 Rubber or plastics coated fabrics Low-temperature bend test
HG/T 2-162-1965 Low temperature impact compression test method for plastics

Professional Standard - Aerospace

QJ 1621-1989 Low temperature compression test method for rigid foamed plastics
QJ 20052-2011 Cryogenic test method for high pressure helium valve
QJ 1620-1989 Low temperature tensile test method for rigid foamed plastics

Professional Standard - Electron

SJ 2326-1983 Generic specification for high and low temperature low pressure test chambers
SJ/T 10212-1991 Climate testing equipment-High and low temperature/Low air pressure test equipment for Type Y60600 - G

Group Standards of the People's Republic of China

T/CAS 263-2017 Rotational molding—Low temperature impact test

Professional Standard - Machinery

JB/T 4278.2-1993 Rubber plastic wire and cable test equipment verification method low temperature impact test device
JB/T 4278.8-1993 Rubber plastic wire and cable test equipment verification method low temperature test chamber
JB/T 13702.1-2019 Environmental testing for cameras. Part1:High-temperature and low-temperature test method
JB/T 13229-2017 High and low temprature environmentai chambers used in testing machine
JB/T 8250.5-1999 High-temperature and low-temperature test method for cameras

Taiwan Provincial Standard of the People's Republic of China

CNS 5434-1989 Method of Test for High and Low Temperature for Automobile Parts
CNS 13786-1996 Method of Test for Brittleness Temperature of Plastics
CNS 11788-1986 Method of Test for Fiber Optic Devices (FOTP-37 Cable Bend Test Low and High Temperature)

Professional Standard - Aviation Industry

Q/HBm 109-1994 High temperature and low temperature test methods for auto parts

Professional Standard - Military and Civilian Products

WJ/T 749-2014 Test methods for water immersion, low temperature, high temperature and high humidity for glue used in optical instruments
WJ 749-1994 Water immersion, low temperature, high temperature and high humidity test methods for glue used in optical instruments

Professional Standard - Aviation

HBm 60-1987 High-temperature and low-temperature test methods for instrumentation of miniature automobiles

Liaoning Provincial Standard of the People's Republic of China

DB21/T 2761-2017 High and low temperature test specification for wind power gearbox

Professional Standard - Ocean

HY 21.1-1992 The basic method of environmental test for oceanographic instruments - Guideline for high and low temperature test
HY 21.2-1992 The basic method of environmental test for oceanographic instruments - Guideline for high and low temperature storage test

Professional Standard - Railway

TB/T 2953-1999 Test Method for Railway Ground Signal Product at High and Low Temperature

Standards Norway

NS-INSTA 213:1988 Plastics pipes — Elevated temperature cycling test
NS-EN 12814-6:2000 Testing of welded joints of thermoplastics semi-finished products — Part 6: Low temperature tensile test
NS-EN 1876-1:1997 Rubber- or plastics-coated fabrics — Low-temperature tests — Part 1: Bending test
NS-EN 1876-2:1997 Rubber- or plastics- coated fabrics — Low temperature tests — Part 2: Impact test on loop
NS-EN ISO 10619-3:2011 Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
NS-ENV 13801:2000 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure — Thermoplastics — Recommended practice for installation

International Organization for Standardization (ISO)

ISO 4672:1988 Rubber and plastics hoses; sub-ambient temperature flexibility tests
ISO 4672:1997 Rubber and plastics hoses - Sub-ambient temperature flexibility tests
ISO 4646:1978 Rubber or plastics coated fabrics — Low temperature impact test
ISO 4675:2017 Rubber- or plastics-coated fabrics - Low-temperature bend test
ISO 4675:1979 Fabrics coated with rubber or plastics — Low temperature bend test
ISO 4646:1989 Rubber- or plastics-coated fabrics; low-temperature impact test
ISO 4675:1990 Rubber- or plastics-coated fabrics; low-temperature bend test
ISO 4646:2022 Rubber- or plastics-coated fabrics — Low-temperature impact test
ISO 13257:2010 Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling
ISO 10619-3:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures
ISO/TS 7024:2005 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Thermoplastics - Recommended practice for installation
ISO 15579:2000 Metallic materials - Tensile testing at low temperature

Ente Nazionale Italiano di Unificazione

UNI EN 24672:1993 Rubber and plastic hoses. Sub-ambient temperature flexibility tests.
UNI ISO 4672:1990 Rubber and plastic hoses. Low temperature flexibility tests
UNI EN 1876-1:1999 Rubber- or plastics-coated fabrics - Low-temperature tests - Bending test
UNI 5111-1969 Mechanical tests of ferrous materials. Creep test for steel at elevated temperatures.
UNI EN 1876-2:2000 Rubber- or plastics- coated fabrics - Low temperature tests - Impact test on loop
UNI EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures
UNI EN ISO 4589-3:1998 Plastics - Determination of burning behaviour by oxygen index - Elevated- temperature test.
UNI EN 12814-6:2001 Testing of welded joints of thermoplastics semi-finished products - Low temperature tensile test.
UNI EN ISO 4672:2000 Rubber and plastics hoses - Sub-ambient temperature flexibility tests
UNI EN ISO 6892-3:2015 Metallic materials - Tensile testing - Method of test at low temperature
UNI EN 1186-13:2003 Materials and articles in contact with foodstuffs - Plastics - Test methods for overall migration at high temperatures
UNI ENV 13801:2002 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation
UNI ENV 1186-13:1999 Materials and articles in contact with foodstuffs - Plastics - Test method for overall migration at high temperatures
UNI 5814-1966 Plastic material testing. Determination of maximum temperature and rate of temperature increase during hardening of unsaturated polyester resin

Association Francaise de Normalisation

NF T51-196:1980 Plastics. Guide to cold and dry heat tests.
NF G37-111-1*NF EN 1876-1:1998 Rubber- or plastics-coated fabrics. Low temperature tests. Part 1 : bending test.
NF ISO 18766:2014 Vulcanized or thermoplastic rubber - Low temperature testing - General introduction and guidelines
NF EN ISO 10619-3:2012 Rubber and plastic hoses and tubes - Measurement of flexibility and stiffness - Part 3: bend tests at low and high temperatures
NF T47-203-3*NF EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3 : bending tests at high and low temperatures.
NF G37-111-2*NF EN 1876-2:1998 Rubber- or plastics-coated fabrics. Low temperature tests. Part 2 : impact test on loop.
NF EN 1876-1:1998 Textile supports coated with rubber or plastic - Low temperature tests - Part 1: folding test
NF EN ISO 13257:2018 Thermoplastic piping systems for non-pressure applications - Test method for resistance to high temperature cycling
NF EN 1876-2:1998 Textile supports coated with rubber or plastic - Low temperature tests - Part 2: loop impact test
NF T51-071-3*NF EN ISO 4589-3:2017 Plastics - Determination of burning behaviour by oxygen index - Part 3 : Elevated-temperature test

British Standards Institution (BSI)

BS EN 24672:1993 Rubber and plastics hoses. Sub-ambient temperature flexibility tests
BS EN 1876-1:1998 Rubber- or plastics-coated fabrics - Low temperature tests - Bending test
07/30164313 DC ISO 28702. Rubber and plastics hoses. Sub-ambient temperature crush test
BS ISO 4646:2022 Rubber- or plastics-coated fabrics. Low-temperature impact test
BS EN 1876-2:1998 Rubber- or plastics-coated fabrics - Low temperature tests - Impact test on loop
BS ISO 10619-3:2011 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at high and low temperatures
16/30334089 DC BS ISO 4675. Rubber- or plastics-coated fabrics. Low-temperature bend test
21/30410903 DC BS ISO 4646. Rubber- or plastics-coated fabrics. Low-temperature impact test
BS EN ISO 13257:2017 Thermoplastics piping systems for non-pressure applications. Test method for resistance to elevated temperature cycling
BS DD ENV 1186-12:1995 Materials and articles in contact with foodstuffs. Plastics-Test methods for overall migration at low temperatures
BS EN 12814-6:2000 Testing of welded joints of thermoplastics semi-finished products - Low temperature tensile test
BS PD CEN/TR 13801:2014 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Thermoplastics. Recommended practice for installation
BS DD ENV 1186-13:1999 Materials and articles in contact with foodstuffs. Plastics-Test method for overall migration at high temperatures

Magyar Szabványügyi Testület

MSZ 7535-1984 Plastic transport box. High temperature resistance test and detection

American National Standards Institute （ANSI)

ANSI/TIA-455-37-A-1993 Low or High Temperature Bend Test
ANSI/TIA-455-37A-1993 Fiber Optic Cable Bend Test, Low and High Temperature
ANSI/EIA/TIA 455-37A:1993 Fiber Optic Cable Bend Test, Low and High Temperature
ANSI/TIA/EIA-455-37-A-1993(2005) FOTP-37 Low or High Temperature Bend Test for Fiber Optic Cable
ANSI/EIA 364-105-A:2008 Altitude - Low Temperature Test Procedure for Electrical Connectors

Swedish Institute for Standards

SIS SS-ISO 4672:1990 Rubber and plastics hoses — Sub-ambient temperature flexibility tests
SS-EN 12814-6:2000 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test�
SS-EN 1876-1:1997 Rubber-or plastic-coated fabrics - Low-temperature tests - Part 1: Bending test
SS-EN 1876-2:1997 Rubber-or plastic-coated fabrics - Low-temperature tests - Part 2: Impact test on loop
SS-ISO 4675:2018 Rubber- or plastics-coated fabrics - Low-temperature bend test (ISO 4675:2017, IDT)
SIS-ISO/TS 7024:2006 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Thermoplastics - Recommended practice for installation

U.S. Military Regulations and Norms

ARMY MIL-P-43038 B NOTICE 4-2000 PLASTIC MOLDING MATERIAL, POLYESTER, LOW-PRESSURE LAMINATING, HIGH TEMPERATURE RESISTANT
ARMY MIL-P-43038 B VALID NOTICE 5-2013 Plastic Molding Material, Polyester, Low-Pressure Laminating, High Temperature Rresistant
ARMY MIL-P-43038 B REINST NOTICE 3-2000 PLASTIC MOLDING MATERIAL, POLYESTER, LOW-PRESSURE LAMINATING, HIGH TEMPERATURE RESISTANT

Korean Agency for Technology and Standards (KATS)

KS M ISO 4675-2012(2017) Rubber- or plastics-coated fabrics－Low-temperature bend test
KS M ISO 4646-2024 Rubber- or plastics-coated fabrics－Low-temperature impact test
KS M ISO 4675-2023 Rubber- or plastics-coated fabrics — Low-temperature bend test
KS M ISO 4646-2009(2019) Rubber- or plastics-coated fabrics－Low-temperature impact test
KS M ISO 4675-2012(2022) Rubber- or plastics-coated fabrics－Low-temperature bend test
KS M ISO 4675:2012 Rubber- or plastics-coated fabrics－Low-temperature bend test
KS M ISO 4646:2009 Rubber- or plastics-coated fabrics-Low-temperature impact test
KS M 6676-2008 Rubber, vulcanized or thermoplastic－Determination of low temperature properties
KS C 0277-1997 Background information, Section 0ne -Cold and dry heat tests
KS M ISO 4672-2013 Rubber and plastics hoses－Sub-ambient temperature flexibility tests
KS M ISO 10619-3-2019 Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 3: Bending tests at high and low temperatures
KS R 0016-1971 Method of high and low temperature test for automobile parts
KS M ISO 10619-3:2014 Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 3: Bending tests at high and low temperatures
KS M ISO 10619-3-2014(2019) Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 3: Bending tests at high and low temperatures
KS M ISO 10619-3-2014(2024) Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 3: Bending tests at high and low temperatures
KS M ISO 4646-2019 Rubber- or plastics-coated fabrics－Low-temperature impact test
KS R 9191-1996 High and low temperature testing methods for parts of railway signaling
KS R 0016-2015 Method of high and low temperature test for automobile parts
KS M ISO 4589-3-2023 Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test
KS R 9213-2007 Railway rolling stock－High and low temperature test methods of parts
KS R 9191-2022 High and low temperature testing methods for parts of railway signaling

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 4675:2015 Rubber- or plastics-coated fabrics -- Low-temperature bend test
OS GSO ISO 10619-3:2013 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures
OS GSO ISO 15579:2008 Metallic materials - Tensile testing at low temperature
OS GSO ISO/TS 7024:2009 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings-thermoplastics- Recommended practice for installation

Polski Komitet Normalizacyjny (PKN)

PN C89055-1986 Plastic foils Methods of testing resistance to low temperatures

Gosstandart of Russia

GOST ISO 4675-2019 Rubber- or plastics-coated fabrics. Low-temperature bend test
GOST 28788-1990 Rubber- or plastics-coated fabrics. Low-temperature impact test
GOST 28789-1990 Rubber- or plastics-coated fabrics. Low temperature bend test
GOST 33519-2015 Polymer composites. Test method for compression at normal, low and high temperatures
GOST 25.602-1980 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for compression properties at normal, elevated and low temperatures
GOST 25.603-1982 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for tensile properties of ring specimens at normal, elevated and low temperatures
GOST 25.604-1982 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for bending properties at normal, elevated and low temperatures
GOST 9454-1978 Metals. Method for testing the impact strength at low, room and high temperature
GOST R ISO 18766-2017 Vulcanized rubber and thermoplasts. Low temperature testing. General requirements

German Institute for Standardization

DIN EN 12814-6:2000-03 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test; German version EN 12814-6:2000
DIN EN 1876-1:1998 Rubber or plastics coated fabrics - Low temperatures tests - Part 1: Bending test; German version EN 1876-1:1997
DIN EN 12814-6:2000 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test; German version EN 12814-6:2000
DIN EN ISO 4589-2:2006 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:1996 + Amd. 1:2005)(includes Amendment A1:2006) English version of DIN EN ISO 4589-2:1999 + A1:2006-06
DIN EN ISO 4589-3:1996 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test (ISO 4589-3:1996); German version EN ISO 4589-3:1996
DIN EN 1876-1:1998-01 Rubber or plastics coated fabrics - Low temperatures tests - Part 1: Bending test; German version EN 1876-1:1997
DIN EN 1876-2:1998-01 Rubber or plastics coated fabrics - Low temperatures tests - Part 2: Impact test on loop; German version EN 1876-2:1997
DIN EN 1876-2:1998 Rubber or plastics coated fabrics - Low temperatures tests - Part 2: Impact test on loop; German version EN 1876-2:1997
DIN EN ISO 10619-3:2012-03 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011); German version EN ISO 10619-3:2011

Danish Standards Foundation

DANSK DS/EN 12814-6:2000 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test
DS/EN 12814-6:2000 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test
DANSK DS/EN 1876-1:1997 Rubber- or plastics-coated fabrics - Low-temperature tests - Part 1: Bending test
DS/EN 1876-1:1998 Rubber- or plastics-coated fabrics - Low-temperature tests - Part 1: Bending test
DANSK DS/EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures
DANSK DS/EN 1876-2:1998 Rubber- or plastics-coated fabrics - Low temperature tests - Part 2: Impact test on loop
DS/EN 1876-2:1998 Rubber- or plastics-coated fabrics - Low temperature tests - Part 2: Impact test on loop
DS/EN 24672:1993 Rubber and plastics hoses. Sub-ambient temperature flexibility tests
DS/EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures

European Committee for Standardization (CEN)

EN ISO 4672:1999 Rubber and Plastics Hoses - Sub-Ambient Temperature Flexibility Tests
EN 12814-6:2000 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test
prEN 495-5-1991 Thermoplastic and elastomeric roofing and sealing sheets; low temperature folding test
EN 1876-1:1997 Rubber- or Plastics-Coated Fabrics - Low-Temperature Tests - Part 1: Bending Test
EN 24672:1993 Rubber and plastics hoses; sub-ambiant temperature flexibility tests (ISO 4672:1988)
EN 1876-2:1997 Rubber- or plastics-coated fabrics - Low temperature tests - Part 2: Impact test on loop
EN ISO 13257:2017 Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling
EN ISO 10619-3:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
EN ISO 13257:2018 Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling
EN 1186-12:2002 Materials and articles in contact with foodstuffs - Plastics - Part 12: Test methods for overall migration at low temperatures

Spanish Association for Standardization (UNE)

AENOR UNE-EN 12814-6:2001 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test.
AENOR UNE-EN 1876-1:1998 Rubber- or plastics-coated fabrics - Low-temperature tests - Part 1: Bending test
UNE-EN 12814-6:2001 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test.
UNE-EN 1876-1:1998 Rubber- or plastics-coated fabrics - Low-temperature tests - Part 1: Bending test
AENOR UNE-EN 1876-2:1998 Rubber- or plastics- coated fabrics - Low temperature tests - Part 2: Impact test on loop
UNE-EN 1876-2:1998 Rubber- or plastics- coated fabrics - Low temperature tests - Part 2: Impact test on loop
UNE 53511:2001 Rubber, vulcanized or thermoplastic. Determination of compresion set at ambient, elevates or low temperatures.

Lithuanian Standards Office

LST EN 12814-6-2000 Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test
LST EN 1876-1-2000 Rubber- or plastics-coated fabrics - Low-temperature tests - Part 1: Bending test
LST EN 1876-2-2000 Rubber- or plastics- coated fabrics - Low temperature tests - Part 2: Impact test on loop

GCC Standardization Organization

GSO ISO 10619-3:2013 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures
GSO ISO 4675:2015 Rubber- or plastics-coated fabrics -- Low-temperature bend test
GSO ISO 4646:2015 Rubber- or plastics-coated fabrics -- Low-temperature impact test
GSO ISO 15579:2008 Metallic materials - Tensile testing at low temperature
BH GSO ISO/TS 7024:2024 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings-thermoplastics- Recommended practice for installation
BH GSO ISO 15579:2024 Metallic materials - Tensile testing at low temperature
GSO ISO/TS 7024:2009 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings-thermoplastics- Recommended practice for installation

(U.S.) Telecommunications Industries Association

EIA/TIA-455-37A-1993 FOTP-37 Low or High Temperature Bend Test for Fiber Optic Cable
TIA-455-37-A-2000(2013) FOTP-37 Low or High Temperature Bend Test for Fiber Optic Cable
TIA-455-37-A-1993 FOTP-37 Low or High Temperature Bend Test for Fiber Optic Cable

Japanese Industrial Standards Committee (JISC)

JIS Z 2279:1992 Method of high temperature low cycle fatigue testing for metallic materials
JIS K 6404-13:1999 Testing methods for rubber-or plastics-coated fabrics -- Part 13: Low-temperature bend test
JIS K 7201-3:2008 Plastics -- Determination of burning behaviour by oxygen index -- Part 3: Elevated-temperature test
JIS K 6261:1997 Low temperature testing methods for rubber, vulcanized or thermoplastic
JIS E 3019:1979(2001) High and low temperature testing methods for parts of railway signaling
JIS K 6404-20:1999 Testing methods for rubber-or plastics-coated fabrics -- Part 20: Torsion test at low temperature
JIS E 3019:2018 High and low temperature testing methods for parts of railway signalling
JIS D 0204:1967 Method of high and low temperature test for automobile parts
JIS E 4035:1995 Railway rolling stock.High and low temperature test methods of parts

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 10619-3:2016 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures
BH GSO ISO 13257:2016 Thermoplastics piping systems for non-pressure applications -- Test method for resistance to elevated temperature cycling

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 1462.16:2006 Methods of test for plastics pipes and fittings - Method for high temperature testing of pipe
AS/NZS 1462.16:2006(R2017) Methods of test for plastics pipes and fittings - Method for high temperature testing of pipe (FOREIGN STANDARD)

American Society for Testing and Materials (ASTM)

ASTM D793-49(2076)e1 Method of Test for Short-Time Stability at Elevated Temperatures of Plastics Containing Chlorine
ASTM D7735-11(2016) Standard Test Method for Type A Durometer Hardness Testing of Road Marking Thermoplastic at Elevated Temperatures
ASTM D793-49(1976)e1 Method of Test for Short-Time Stability at Elevated Temperatures of Plastics Containing Chlorine

Bureau of Indian Standards

IS 7016-10-2022 Methods of Test for Rubber or Plastics Coated Fabrics - Part 10 Low-Temperature Bend test
IS 7016-14-2024 Rubber or Plastics Coated Fabrics - Methods of Test - Part 14 Low Temperature Impact Test

Austrian Standards

ONORM EN 24672-1993 Rubber and plastics hoses - Sub-ambiant temperature flexibility tests (ISO 4672:1988)

Czech Standards Institute (UNMZ)

CSN 64 0617-1979 Determination of esistance of plastics to ow temperature
CSN 34 7010 Cast.69-1972 Low and high temperature endurance test of fibrous impregnated coveringa
CSN 34 7010 Cast.68-1972 Low and high temperature endurance test of fibrous impregnated coverings

Military Standards (MIL-STD)

MIL MIL-P-43038B-1973 PLASTIC MOLDING MATERIAL, POLYESTER, LOW-PRESSURE LAMINATING, HIGH TEMPERATURE RESISTANT (SUPERSEDING MIL-P-43038A)

Standard Association of Australia （SAA）

AS 2291:2020 Metallic materials — Tensile testing — Test at elevated temperature