Infrared unstable

Infrared unstable, Total:109 items.

The international standard classification for "Infrared unstable" includes: Other equipment for petroleum and natural gas industries , Rubber , Coals , Medical Sciences and health care facilities in general .

The Chinese standard classification for "Infrared unstable" includes: Petroleum exploration, development, gathering and transportation engineering in general , Basic standard and general method for synthetic rubber , Basic standard and general method on forestry , Rubber products in general , Coal analysis methods , Marking, packaing, transport and storage .

Professional Standard - Aerospace

QJ 2942-1997 Verification Regulations for Infrared Target Simulator
QJ 2452-1993 General specification for infrared seeker gyro stabilization system

工业和信息化部

YB/T 6059-2022 Infrared radiation coatings at high temperature--The measuringmethod for stability of suspensions

Group Standards of the People's Republic of China

T/GDSBME 007-2023 Medical near-infrared optical positioning system
T/BPCT 001-2020 Identification of fresh ginger Infrared spectroscopic method
T/CAQI 73-2019 Infrared Spectroscopy for Identification of Jewelry and Jade
T/QGCML 4000-2024 Low infrared transmittance infrared cut filter

Shandong Provincial Standard of the People's Republic of China

DB37/T 4114-2020 Infrared Spectroscopy for Identification of Jewelry and Jade

Professional Standard - Petroleum

SY/T 6363-1998 Technical requirement for transient well testing

Professional Standard - Petrochemical Industry

SH/T 1762-2008 Rubber-Determination of residual unsaturation of hydrogenated nitrile rubber(HNBR) by infrared spectroscopy

Professional Standard - Forestry

LY/T 2151-2013 Method for determination of holocellulose and acid-insoluble lignin in wood—Near infrared spectroscopy

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 7764-2017 Rubber indentification--Infrared spectrometric method

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 7764-2001 Rubber--Identification--Infra-red spectrometric method
GB/T 25214-2010 Determination of total sulfur in coal by IR spectrometry

Military Standard of the People's Republic of China-General Armament Department

GJB/J 3351-1998 Infrared target simulator calibration procedures
GJB 5674.1-2006 Assessment criteria of jamming effectiveness for IR decoy flare.Part 1:Airborne IR decoy flare
GJB 9925-2021 External field radiation calibration method of spaceborne infrared camera

Professional Standard - Pharmaceutical Packaging

YBB 00262004-2015 Infrared spectroscopy of packaging materials
YBB 0026-2004 Baozhuangcailiao Hongwaiguangpu Cedingfa The test method for infrared spectrum in packaging materia

U.S. Military Regulations and Norms

ARMY MIL-P-670 A-1966 PHOSPHORUS, RED, STABILIZED
ARMY MIL-P-670 A VALID NOTICE 1-1988 PHOSPHORUS, RED, STABILIZED

SCC

MIL MIL-P-670A-1966 PHOSPHORUS, RED, STABILIZED (SUPERSEDING MIL-P-670)
CAN/CGSB-53.138-M89-1989 Loose leaf, settled and unsettled
CAN/CGSB-53.138-1996 Loose leaf, settled and unsettled
HOLDEN HN 1096-2009 POLYPROPYLENE UV STABILISED
CSA Z902-15:2015 Blood and labile blood products

GM North America

GM GMP.PA66.079-2012 NYLON 66 - UV STABILIZED, HIGH IMPACT MODIFIED, HEAT STABILIZED (Issue 3; Do Not Use on New Programs; Replaced by GMW16558)
GMP.PVC.042-2011 PVC ?UV Stabilized, Heat Stabilized, Castable Powder Issue 3; Do Not Use on New Programs; Replaced by GMW16081
GMP.ABS+PC.002-2010 ABS+PC, Heat Stable, Injection Molded, Low UV Stable Issue 4; Do Not Use on New Programs; Replaced by GMW15581
GMP.ABS+PC.017-2010 ABS+PC, UV Stable, Heat Stable, Injection Molded Issue 4; Do Not Use on New Programs; Replaced by GMW15581
GM GMP.PVC.042-2000 PVC - UV Stabilizes, Heat Stabilized, Castable Power
GM GMP.ABS+PC.017-1995 ABS + PC - UV Light Stabilized
GMP.PA6.025R-2011 Nylon 6 ?Recycled, 34% Mineral Filled, UV Stable, Heat Stabilized Issue 2; Do Not Use on New Programs; No Replacement
GM GMP.PP.002-1994 Polypropylene - Heat Stabilized, UV Stabilized, Impact Modified
GM GMP.PA6.025R-1996 Nylon 6 - 34% Mineral Filled, UV Stable, Heat Stabilized
GM GMP.SAN.001-1996 San - UV Stabilized, Clear
GM GMP.PA6.045-2013 Nylon 6 - 33% Glass Fiber Reinforced, UV Stabilized, Heat Stabilized Issue 4; Do Not Use on New Programs; Replaced by GMW16582
GM GMP.PA6.002-1995 Nylon 6 - UV Stabilized, Heat Stabilized, Impact Modified (Revision B)
GM GMP.PA66/6.004-2013 Nylon 66/6 - 33% Glass Fiber Reinforced, UV Stable, Heat Stabilized Issue 5; Do Not Use on New Programs; No Replacement
GM GMP.ABS.017-1992 ABS - UV Stabilized, General Purpose
GM GMP.PA6.025R-2011 Nylon 6 - Recycled, 34% Mineral Filled, UV Stable, Heat Stabilized (Issue 2; Do Not Use on New Programs; No Replacement)
GM GMP.PP+PMMA.001-2000 GMP.PP+PMMA-High Impact, Heat Stabilized, UV Stabilized Copolymer
GM GMP.PA6.055R-2011 Nylon 6 - Recycled, 40% Mineral Filled, UV Stable, Heat Stabilized (Issue 2; Do Not Use on New Programs; No Replacement)
GM GMP.ABS.004-1990 ABS - Ultraviolet Light Stabilized, Low Gloss
GM GMP.ABS+PC.019-2012 ABS + PC - UV Stabilized, Impact Modified (Issue 2; Do Not Use on New Programs; No Replacement)
GM GMP.PA6.055R-1997 Nylon 6 - Recycled, 40% Mineral Filled, UV Stable, Heat Stabilized
GM GMP.PA6.045-1997 Nylon 6 - 33% Glass Fiber Reinforced, UV Stabilized, Heat Stabilized
GM GMP.ABS.002-1990 ABS - Ultraviolet Light Stabilized, Low Gloss
GM GMP.PA66/6.004-1997 Nylon 66/6 - 33% Glass Fiber Reinforced, UV Stabilized, Heat Stabilized (Issue 5; Do Not Use on New Programs; No Replacement)
GM GMP.ABS.017-2011 ABS - UV Stabilized, General Purpose (Issue 3; Do Not Use on New Programs; Replaced by GMW15572)
GM GMP.ABS+PC.010-2012 ABS + PC - High Impact, Heat Stabilized, Exterior Grade (Issue 2; Do Not Use on New Programs; No Replacement)
GMP.ABS.004-2010 ABS - Ultraviolet Light Stabilized, Low Gloss Issue 4; Do Not Use on New Programs; Replaced by GMW15572
GM GMP.ABS.016-1991 ABS - High Impact, UV Stabilized
GM GMP.ABS.010-1990 ABS - Medium Heat Resistant, UV Stabilized
GM GMP.ABS.003-1993 ABS - Medium High Heat Resistant, Ultraviolet Light Stabilized
GM GMP.PA66.014-1997 Nylon 66 - UV Stabilized, Heat Stabilized
GM GMP.POM.017-1997 Acetal - Homopolymer, UV Stabilized

RU-GOST R

GOST 28447.0-1990 Pneumotextured threads. Methods for the determination of structure and tensile strength instability
GOST R 57986-2017 Polymer composites. Infrared spectroscopy. Near infrared qualitative analysis
GOST 18986.21-1978 Reference diodes and stabistors. Method for measuring time drift of working voltage
GOST 21316.5-1975 Photocells. Method of instability measurement
GOST 26490-1985 Soils. Determination of mobile sulfur by CINAO method

Building Officials and Code Administrators International(U.S.)

BOCA CHAPTER 42 NFPC-1993 Unstable (Reactive) Materials
BOCA CHAPTER 42 NFPC COMM-1993 Unstable (Reactive) Chemicals

Association Francaise de Normalisation

NF X20-361:1976 Gas analysis. Determination of carbon monoxide by absorption of a non dispersive infra-red radiation beam.
NF T43-024*NF ISO 14558:2016 Rubber - Determination of residual unsaturation of hydrogenated nitrile butasiene rubber (HNBR) by infrared spectroscopy
NF ISO 14558:2016 Rubber - Determination of residual unsaturation of hydrogenated nitrile butadiene rubber (HNBR) by infrared spectroscopy
NF X20-301:1978 Gas analysis by absorption of a non dispersive infra-red radiation beam.
NF EN 120002:1992 Particular framework specification: infrared emitting diodes, networks of infrared emitting diodes
NF T46-054:2007 Rubber - Identification - Infra-red spectrometric method.

SE-SIS

SIS 18 41 22-1974 Paints. Determination of the mass volatile and non-volatile matter

European Committee for Standardization (CEN)

EN 13187:1998 Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method (ISO 6781:1983, modified)
prEN 26781-1992 Thermal insulation; qualitative detection of thermal irregularities in building envelopes; infrared method (ISO 6781:1983)

GM Europe

GME QK 000198-1983 Polycarbonat -Formmasse, UV-stabilisiert Polycarbonate - Moulding Compounds, UV Stabilized

Korean Agency for Technology and Standards (KATS)

KS M ISO 14558-2022 Rubber — Determination of residual unsaturation of hydrogenated nitrile butadiene rubber(HNBR) by infrared spectroscopy
KS M ISO 14558:2007 Rubber－Determination of residual unsaturation of hydrogenated nitrile rubber(HNBR) by infrared spectroscopy
KS M ISO 14558:2017 Rubber — Determination of residual unsaturation of hydrogenated nitrile butadiene rubber(HNBR) by infrared spectroscopy
KS M ISO 14558-2017(2022) Rubber — Determination of residual unsaturation of hydrogenated nitrile butadiene rubber(HNBR) by infrared spectroscopy
KS M ISO 4650-2014(2019) Rubber — Identification — Infrared spectrometric method
KS F 2829-2020 Thermal performance of buildings－Quantitative detection of thermal irregularities in building envelopes－Infrared method
KS F 2829-2005(2020) Thermal performance of buildings－Quantitative detection of thermal irregularities in building envelopes－Infrared method
KS B ISO TR 11332-2015 Hydrometric determination－Unstable channels and ephemeral streams

International Organization for Standardization (ISO)

ISO 14558:2016 Rubber - Determination of residual unsaturation of hydrogenated nitrile butadiene rubber (HNBR) by infrared spectroscopy
ISO 14558:2000 Rubber - Determination of residual unsaturation of hydrogenated nitrile rubber (HNBR) by infrared spectroscopy
ISO 4650:2012 Rubber - Identification - Infrared spectrometric methods

YU-JUS

JUS G.C1.303-1996 Plastics - Determination vinylidene unsaturation in polyethylene - Infrared spectrophotometric method

ES-AENOR

UNE 53-633-1991 Rubber. Identification infra-red spectrometric method

AENOR

UNE 53633:1991 RUBBER. IDENTIFICATION INFRA-RED SPECTROMETRIC METHOD.

KR-KS

KS M ISO 14558-2017 Rubber — Determination of residual unsaturation of hydrogenated nitrile butadiene rubber(HNBR) by infrared spectroscopy

GSO

GSO ISO 14558:2015 Rubber -- Determination of residual unsaturation of hydrogenated nitrile rubber (HNBR) by infrared spectroscopy

German Institute for Standardization

DIN EN 13187:1999 Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method (ISO 6781:1983, modified); German version EN 13187:1998

Japanese Industrial Standards Committee (JISC)

JIS C 7514:1985 Infrared lamps
JIS K 6230:2006 Rubber -- Identification -- Infrared spectrometric method
JIS K 6230:2018 Rubber -- Identification -- Infrared spectrometric methods

GM Global

GMW 16948-2013 Polyamide 6 - Heat Stabilized, Impact Modified, UV Stabilized Issue 1; English

National Fire Protection Association (NFPA)

NFPA 1H PART 6 CHAPTER 72-2003 Unstable (Reactive) Solids and Liquids

ESDU - Engineering Sciences Data Unit

ESDU 82020 A-2001 Introduction to unsteady aerodynamics.

CZ-CSN

CSN 58 8785-1994 Methods of test for fats and oils Determination of content of isolated trans-unsaturated compounds by infrared spectroscopy
CSN 57 0536-1999 Determination of milk composition by mid-infrared analyzer

American National Standards Institute （ANSI)

ANSI/TIA/EIA 526-17-1993 Output Jitter Measurement
ANSI/TIA/EIA 526-15-1993 Jitter Tolerance Measurement

CN-QIYE

Q/GDW 468-2010 Calibration specifications for infrared thermometers and infrared thermal imaging cameras

British Standards Institution (BSI)

BS ISO 14558:2016 Rubber. Determination of residual unsaturation of hydrogenated nitrile butadiene rubber (HNBR) by infrared spectroscopy
BS ISO 14558:2000 Rubber - Determination of residual unsaturation of hydrogenated nitrile rubber (HNBR) by infrared spectroscopy
BS ISO 4650:2006 Rubber - Identification - Infrared spectrometric method
BS ISO 4650:2012 Rubber. Identification. Infrared spectrometric methods

ES-UNE

UNE-EN 13187:1998 Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method (ISO 6781:1983 modified)

Society of Automotive Engineers (SAE)

SAE J359-1991 Infrared Testing

SAE - SAE International

SAE J359-2018 Infrared Testing