photon proton dot

photon proton dot, Total:143 items.

The international standard classification for "photon proton dot" includes: Medical Sciences and health care facilities in general , Electronic display devices , Soil quality. Pedology , General methods of tests and analysis for food products , Miscellaneous domestic and commercial equipment , Astronomy. Geodesy. Geography , Physicochemical methods of analysis , Optics and optical measurements .

The Chinese standard classification for "photon proton dot" includes: Medical science , Basic standards and general methods for synthetic resin and plastic , Analysis methods for environmental quality of soils , Basic standards and general methods , Daily-use hardware , Photogrammetry and Remote Sensing , Synthetic materials in general , Basic Subject in general , Pressure vessel .

Group Standards of the People's Republic of China

T/CSTM 00198-2021 Graphene quantum dots—Determination of enzyme-like activities — Ultraviolet-visible spectrophotometry
T/CSTM 00197-2021 Graphene quantum dots — Determination of relative fluorescence quantum efficiency for the blue emission — Molecular fluorescence spectroscopy
T/CI 027-2021 Quantum Dot Diffusion Plate for LCD Backlight Module
T/SLDA 012-2023 Assessment requirements for quality grading and forerunner—LED pixel light source

Military Standard of the People's Republic of China-General Armament Department

GJB 7367-2011 Methodology of measurement for high-energy laser beam quality factor β

Professional Standard - Hygiene

WS 340-2011 Quality standards for excimer laser corneal refractive surgery

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 25723-2010 Utility lighters—Safety and quality
GB/T 42977-2023 Nanotechnology—Nano-enabled optoelectrical display—Optical reliability assessment for quantum dot enabled light conversion film
GB/T 36081-2018(英文版) Nanotechnology: Characterization of Cadmium Selenide Quantum Dot Nanocrystals by Fluorescence Emission Spectroscopy
GB/T 42976-2023 Nanotechnology—Nano-enabled optoelectrical display— Measurement of optical performance for quantum dot enabled light conversion film
GB/T 17141-1997 Soil quality-Determination of lead, cadmium-Graphite furnace atomic absorption spectrophotometry
GB/T 17136-1997 Soil quality - Determination of total mercury - Cold atomic absorption spectrophotometry
GB/T 36081-2018e Nanotechnology—Characterization of CdSe quantum dot nanocrystal—Fluorescence spectroscopy
GB/T 17139-1997 Soil quality-Determination of nickel-Flame atomic absorption spectrophotometry
GB/T 24370-2009 Characterization of CdSe quantum dot nanocrystals - UV - Vis absorption spectroscopy
GB/T 17138-1997 Soil quality - Determination of copper, zinc - Flame atomic absorption spectrophotometry
GB/T 23780-2009 Quality examination methods of the pastry
GB/T 36100-2018 Indices and computation method of quality assessment for airborne LiDAR point cloud data
GB/T 17137-1997 Soil quality-Determination of total chromium-Flame atomic absorption spectrophotometry

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 36081-2018 Nanotechnology—Characterization of CdSe quantum dot nanocrystal—Fluorescence spectroscopy

工业和信息化部

SJ/T 11460.4-2018 Backlight units for liquid crystal displays Part 4:Quantum dots backlight unit - Blank detail specification

Professional Standard - Labor and Labor Safety

LD/T 69-1994 Key Points for Quality Control of Welded Steel Gas Cylinders

Jiangxi Provincial Standard of the People's Republic of China

DB36/T 898-2016 Part-time worker service quality specification

Anhui Provincial Standard of the People's Republic of China

DB34/T 833-2008 Requirements for jasmine seed quality

Chongqing Provincial Standard of the People's Republic of China

DB50/T 1328-2022 Gardenia seed quality grading

Association Francaise de Normalisation

NF EN ISO 17852:2008 Water quality - Mercury dosage - Atomic fluorescence spectrometry method
NF X43-275:2002 Air quality - Air in workplaces - Determination of elements present in the air in workplaces by atomic spectrometry
NF T90-139*NF EN ISO 17852:2008 Water quality - Determination of mercury - Method using atomic fluorescence spectrometry
NF EN 1233:1996 Water quality - Chromium dosage - Atomic absorption spectrometry methods
NF S10-042*NF ISO 9039:2009 Optics and photonics - Quality evaluation of optical systems - Determination of distortion
NF ISO 15795:2002 Optics and photonics - Quality assessment of optical systems - Estimation of image quality degradation due to chromatic aberrations
NF EN ISO 7980:2000 Water quality - Calcium and magnesium dosage - Atomic absorption spectrometry method
NF EN ISO 12020:2000 Water quality - Aluminum determination - Atomic absorption spectrometry methods
NF ISO 9039:2009 Optics and photonics - Quality assessment of optical systems - Determination of distortion
NF T90-113-1:2007 Water quality - Determination of mercury - Method using atomic absorption spectrometry.
NF EN 26777:1993 Water quality - Nitrite dosage - Molecular absorption spectrometry method
NF T90-007:2001 Water quality - Determination of soluble silicates - Molecular absorption spectrometric method.
NF T51-241:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)

German Institute for Standardization

DIN IEC/TS 62607-3-2:2018-09*DIN SPEC 42607-3-2:2018-09 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion (IEC/TS 62607-3-2:2017)
DIN 6809-1:2010 Clinical dosimetry - Part 1: Radiation quality of photon and electron radiation
DIN IEC/TS 62607-3-2:2014 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion (IEC 113/203/CD:2013)
DIN ISO 15795:2008-04 Optics and photonics - Quality evaluation of optical systems - Assessing the image quality degradation due to chromatic aberrations (ISO 15795:2002+Cor. 1:2007)
DIN ISO 15795:2008 Optics and photonics - Quality evaluation of optical systems - Assessing the image quality degradation due to chromatic aberrations (ISO 15795:2002+Cor. 1:2007);English version of DIN ISO 15795:2008-04
DIN IEC/TS 62607-3-2:2018 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion (IEC/TS 62607-3-2:2017)
DIN ISO 9039:2008-08 Optics and photonics - Quality evaluation of optical systems - Determination of distortion (ISO 9039:2008)
DIN ISO 9039:2008 Optics and photonics - Quality evaluation of optical systems - Determination of distortion (ISO 9039:2008)
DIN 6809-1:2010-03 Clinical dosimetry - Part 1: Radiation quality of photon and electron radiation
DIN 6809-1 E:2008-04 Clinical dosimetry - Part 1: Radiation quality of photon and electron radiation
DIN EN ISO 17852:2008 Water quality - Determination of mercury - Method using atomic fluorescence spectrometry (ISO 17852:2006); English version of DIN EN ISO 17852:2008-04
DIN EN ISO 12020:2000 Water quality - Determination of aluminium - Atomic absorption spectrometric methods (ISO 12020:1997); German version EN ISO 12020:2000
DIN 53131-3:2010 Testing of paper - Inkjet mediums - Part 3: Print image quality - optical cancellation, optical density, optical tristimulus values, point image disturbance
DIN EN 1233:1996 Water quality - Determination of chromium - Atomic absorption spectrometric methods; German version EN 1233:1996
DIN 53131-3:2010-11 Testing of paper - Inkjet mediums - Part 3: Print image quality - optical cancellation, optical density, optical tristimulus values, point image disturbance
DIN 53131-3:2009-11 Testing of paper - Inkjet mediums - Part 3: Print image quality - optical cancellation, optical density, optical tristimulus values, point image disturbance
DIN EN 17124:2022-12 Hydrogen fuel - Product specification and quality assurance for hydrogen refuelling points dispensing gaseous hydrogen - Proton exchange membrane (PEM) fuel cell applications for vehicles; German version EN 17124:2022 / Note: This standard is part of t...
DIN 55674:2006 Synthetic Polymers - Determination of molecular mass and molecular mass distribution of polymers by matrix assisted laser desorption/ionization-time-of-flight-mass spectrometry
DIN EN ISO 10927:2018-10 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018); German version EN ISO 10927:2018

GSO

BH GSO IEC TS 62607-3-2:2022 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion
GSO IEC TS 62607-3-2:2021 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion
GSO ISO 9039:2015 Optics and photonics -- Quality evaluation of optical systems -- Determination of distortion
BH GSO ISO 9039:2017 Optics and photonics -- Quality evaluation of optical systems -- Determination of distortion
OS GSO ISO 9039:2015 Optics and photonics -- Quality evaluation of optical systems -- Determination of distortion
GSO ISO/TS 16727:2015 Soil quality -- Determination of mercury -- Cold vapour atomic fluorescence spectrometry (CVAFS)
NB/SH/T 0970-2018 Determination of arsenic content in light fractions - Atomic fluorescence spectrometry
BH GSO ISO/TS 16727:2017 Soil quality -- Determination of mercury -- Cold vapour atomic fluorescence spectrometry (CVAFS)
OS GSO ISO/TS 16727:2015 Soil quality -- Determination of mercury -- Cold vapour atomic fluorescence spectrometry (CVAFS)
GSO ISO 10927:2013 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
GSO ISO 17852:2008 Water quality- Determination of mercury- Method using atomic fluorescence spectrometry
OS GSO ISO 10927:2013 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
GSO ISO/TS 17466:2017 Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots
GSO ISO 16772:2014 Soil quality -- Determination of mercury in aqua regia soil extracts with cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry

IEC - International Electrotechnical Commission

TS 62607-3-2-2017 Nanomanufacturing – Key control characteristics – Part 3-2: Luminescent nanoparticles – Determination of mass of quantum dot dispersion (Edition 1.0)

International Organization for Standardization (ISO)

ISO 17470:2004 Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
ISO 9039:2008 Optics and photonics - Quality evaluation of optical systems - Determination of distortion
ISO 15795:2002 Optics and photonics - Quality evaluation of optical systems - Assessing the image quality degradation due to chromatic aberrations
ISO 16727:2013 Soil quality — Determination of mercury — Cold vapour atomic fluorescence spectrometry (CVAFS)
ISO 17852:2006 Water quality - Determination of mercury - Method using atomic fluorescence spectrometry
ISO/TS 17466:2015 Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots
ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
ISO 10927:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)

Japanese Industrial Standards Committee (JISC)

JIS K 0190:2010 Microbeam analysis -- Electron probe microanalysis -- Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
JIS K 0400-55-20:1998 Water quality -- Determination of cadmium by atomic absorption spectrometry

International Electrotechnical Commission (IEC)

IEC 113/203/CD:2013 IEC/TS 62607-3-2: Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion
IEC TS 62607-3-2:2017 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion

AT-ON

ONORM V 2010-2001 Light signal transmitters for traffic lights - Dimensions, masses and characteristics

CZ-CSN

CSN 75 7400-1998 Water quality - Determination of silver by atomic absorption spectrometric methods

PH-BPS

PNS IEC/TS 62607-3-2:2021 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion

British Standards Institution (BSI)

BS ISO 9039:2008 Optics and photonics. Quality evaluation of optical systems. Determination of distortion
BS ISO 9039:2007 Optics and photonics - Quality evaluation of optical systems - Determination of distortion
PD ISO/TS 16727:2013 Soil quality. Determination of mercury. Cold vapour atomic fluorescence spectrometry (CVAFS)
BS EN 12947:2000 Liming materials - Determination of magnesium content - Atomic absorption spectrometric method
BS EN ISO 12020:2000 Water quality - Determination of aluminium - Atomic absorption spectrometric methods
BS PD ISO/TS 17466:2015 Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots
BS EN ISO 10927:2011 Plastics. Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
PD ISO/TS 17466:2015 Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots
BS EN ISO 10927:2018 Plastics. Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
BS EN ISO 15586:2003(2008)*BS 6068-2.84:2003 Water quality — Determination of trace elements using atomic absorption spectrometry with graphite furnace
BS EN ISO 15586:2003 Water quality. Determination of trace elements using atomic absorption spectrometry with graphite furnace

VN-TCVN

TCVN 7724-2007 Water quality.Determination of merdury.Method using atomic fluorescence spectrometry

Spanish Association for Standardization (UNE)

UNE 81-569-1991 Air quality. Workplace atmospheres. Determination of metallic lead and their ionic compounds. Flame atomic absorption spectrometric method
UNE-EN ISO 10927:2019 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018)
UNE-EN 13506:2002 Water quality - Determination of mercury by atomic fluorescence spectrometry.

Korean Agency for Technology and Standards (KATS)

KS B ISO 15795:2011 Optics and photonics-Quality evaluation of optical systems-Assessing the image quality degradation due to chromatic aberrations
KS B ISO 15795-2011(2021) Optics and photonics — Quality evaluation of optical systems —Assessing the image quality degradation due to chromatic aberrations
KS B ISO 15795-2011(2016) Optics and photonics — Quality evaluation of optical systems —Assessing the image quality degradation due to chromatic aberrations
KS B ISO 9039:2018 Optics and photonics — Quality evaluation of optical systems — Determination of distortion
KS D ISO 9441:2002 Steel－Determination of niobium content－PAR spectrophotometric method
KS I ISO 17852:2011 Water quality－Determination of mercury－Method using atomic fluorescence spectrometry
KS I ISO 15586-2010(2015) Water quality－Determination of trace elements using atomic absorption spectrometry with graphite furnace

KR-KS

KS B ISO 9039-2018 Optics and photonics — Quality evaluation of optical systems — Determination of distortion
KS B ISO 9039-2023 Optics and photonics — Quality evaluation of optical systems — Determination of distortion

SCC

DIN IEC /TS 62607-3-2 E:2014 Draft Document - Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion (IEC 113/203/CD:2013)
DANSK DS/ISO/TS 16727:2013 Soil quality - Determination of mercury - Cold vapour atomic fluorescence spectrometry (CVAFS)
BS PD ISO/TS 16727:2013 Soil quality. Determination of mercury. Cold vapour atomic fluorescence spectrometry (CVAFS)
DANSK DS/ISO/TS 17466:2015 Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots
NS-EN 13506:2001 Water quality — Determination of mercury by atomic fluorescence spectrometry
DANSK DS/EN ISO 15586:2004 Water quality - Determination of trace elements using atomic absorption spectrometry with graphite furnace

Indonesia Standards

SNI 06-2513-1991 Water, Test methods for chromium content by carbon stove atomic absorption spectrophotometer apparatus
SNI 06-2472-1991 Test methods for cobalt content in water by carbon stoves atomic absorption spectrophotometer apparatus
SNI 06-2515-1991 Water, Test method for copper content by atomic absorption spectrophotometer in an extraction manuver
SNI 06-2516-1991 Water, Test method for copper content by carbon stove atomic absorption spectrophotometer apparatus

BELST

STB 1149-99 Electron beam and laser welding. Welder joints. Quality levels

RU-GOST R

GOST R 57060-2016 Copper. Measurement of impurities mass fraction in copper by an inductively coupled plasma atomic emission spectrometry method

Danish Standards Foundation

DS/ISO/TS 16727:2013 Soil quality - Determination of mercury - Cold vapour atomic fluorescence spectrometry (CVAFS)
DS/EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
DS/EN ISO 15586:2004 Water quality - Determination of trace elements using atomic absorption spectrometry with graphite furnace

European Committee for Standardization (CEN)

EN 12947:2000 Liming materials - Determination of magnesium content - Atomic absorption spectrometric method
EN 1233:1996 Water Quality - Determination of Chromium - Atomic Absorption Spectrometric Methods
EN ISO 17852:2008 Water quality - Determination of mercury - Method using atomic fluorescence spectrometry (ISO 17852:2006)
EN ISO 10927:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011)

Consumer Electronics Association （U.S.)

CEA-600.42-1998 Node Medium Access Control Sublayer

Association of German Mechanical Engineers

DVS 3208-1994 Quality assurance measures for electronic and laser beam welding
DVS 3210-2007 Test procedures for the quality assurance of electron and laser beam welds
DVS 3210-1995 Test methods for quality assurance of electron beam and laser beam welds

GOSTR

GOST R 59016-2020 Mineral natural drinking waters. Determination of the mass concentration of bromide ions by the photometric method

RO-ASRO

STAS SR 13315-1996 Water quality - Iron determination - Spectrometric method of atomic absorption

HU-MSZT

MSZ 17060-1976 Measurement of optical technical characteristics of electric light sources

PL-PKN

PN M69020-1974 Welding Quality classification of spot welds

International Federation of Trucks and Engines

NAVISTAR MPAPS P-9516-2016 Quality Requirements for Resistance Spot Welds
NAVISTAR MPAPS P-9516-2014 Quality Requirements For Resistance Spot Welds

South African Bureau of Standard

SANS 5980:2007 Softening point of the non-volatile matter of wax polishes
SANS 6777:1984 Water quality - Determination of nitrite - Molecular absorption spectrometric method

Others: photon proton dot