Environmental thermal desorption instrument

Environmental thermal desorption instrument, Total:129 items.

The international standard classification for "Environmental thermal desorption instrument" includes: Pesticides and other agrochemicals , Environmental testing , Workplace atmospheres , Test conditions and procedures in general , Geology. Meteorology. Hydrology , Measurement of fluid flow .

The Chinese standard classification for "Environmental thermal desorption instrument" includes: Fertilizer and soil conditioner , Material composition analysis instrument and environment detection instrument in general , Labor sanitation , Basic standards and general methods , Environmental Condition and General Test Method , Meteorological instrument , Ionizating Radiation Measurement , Coal mine special equipment .

Professional Standard - Environmental Protection

HJ 8.5-2023 Specification for management of ecological and environmental archives――Ecological and environmental instruments and equipment
HJ 583-2010 Ambient air—Determination of benzene and its analogies using sorbent adsorption thermal desorption and Gas Chromatography
HJ/T 8.5-1994 Specification for Management of Environmental Protection Archives - Instruments and Equipments for Environmental Protection
HJ 584-2010 Ambient air—Determination of benzene and its analogies by activated charcoal adsorption carbon disulfide desorption and gas chromatography
HJ 645-2013 Ambient air - Determination of volatile halogenated hydrocarbons-Activated charcoal adsorption and carbon disulfide desorption/gas chromatographic method

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 14093.1-2009 Environmental technical requirements of machinery products for the warm-damp environments
GB/T 16075-1995 Workplace air--Determination of ethylene oxide--Thermal desorption gas chromatographic method
GB/T 14093.5-2009 Environmental technical requirements of machinery products for dry heat environments
GB/T 11606.7-1989 The method of environmental test for analytical instruments--Damp heat, cyclic
GB/T 11606-2007 Methods of environmental test for analytical instruments
GB/T 14093.5-1997 Environmental technical requirements of machinery products for dry heat environment
GB/T 12085.2-1989 Optics and optical instruments--Environmental test methods--Cold, heat, humidity
GB/T 14093.1-1993 Environmental technical requirements of machinery products for the warm-damp environments
GB/T 31270.4-2014 Test guidelines on environmental safety assessment for chemical pesticides. Part 4: Adsorption/desorption in soils

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40233-2021 Ergonomics of the thermal environment—Instruments for measuring physical quantities

Military Standard of the People's Republic of China-General Armament Department

GJB 595.5-1988 Environmental test methods for artillery optical instruments - damp heat test

Professional Standard - Machinery

JB/T 9464-1999 Ocean environmental conditions for instrumentation
JB/T 9449-1999 Environmental conditions of work for meteorological instrument

Group Standards of the People's Republic of China

T/CAQI 143-2020 Indoor environment comfort detector
T/LNEMA 005-2022 Determination of Monochloroethane in Ambient Air and Exhaust Gas Adsorption on Activated Carbon/Desorption of Methanol - Gas Chromatography
T/CAB 0276-2023 Smart indoor environmental sensing device

National Metrological Verification Regulations of the People's Republic of China

JJG 521-2006 Verification Regulation of X and Gadiation Air Kerma Ratemeters for Environmental Monitoring
JJG 521-1988 X and Gamma Radiation Air Absorbed Dose Rate for Environmental Monitoring
JJG 921-2021 Environmental Vibration Instruments

Professional Standard - Urban Construction

CJ/T 20-1999 Specific equipments for municipal environmental sanitation - Incineration gasification pyrolysis of refuse

Beijing Provincial Standard of the People's Republic of China

DB11/T 1566-2018 Determination of Trimethylbenzene in Ambient Air and Exhaust Gas Adsorption on Activated Carbon/Desorption of Carbon Disulfide-Gas Chromatography

Professional Standard - Ocean

HY 21.3-1992 The basic method of environmental test for oceanographic instruments - Guideline for damp/heat test

Professional Standard - Aviation

HB 7401-1996 Test method for moisture absorption of resin matrix composite laminates in hot and humid environment

Professional Standard - Coal

MT/T 854-2000 Technical condition about the electronic instrumen determining gas desorption index with equating volume principle

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 32065.7-2015 Environmental test methods for oceanographic instruments―Part 7:Damp heat,cyclic
GB/T 32065.6-2015 Enviromental test methods for oceanographic instruments―Part 6:Damp heat,steady state

未注明发布机构

DIN EN ISO 7933 E:2002-12 Thermal Environmental Ergonomics Determining and Interpreting Thermal Stress Analytically Using Predicted Thermal Strain Models (Draft)

VDI - Verein Deutscher Ingenieure

VDI 2465 BLATT 2-2015 Messen von Russ (Immission) - Thermografische Bestimmung des elementaren Kohlenstoffs nach Thermodesorption des organischen Kohlenstoffs

US-FCR

FCR COE ETL 1110-1-173-1996 THERMAL DESORPTION

Lithuanian Standards Office

LST EN 14662-1-2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1 : Pumped sampling followed by thermal desorption and gas chromatography
LST EN 14662-4-2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
LST EN ISO 7726:2002 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998)

AENOR

UNE-EN 14662-1:2006 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography
UNE-EN 14662-4:2006 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
UNE-EN ISO 7726:2002 Ergonomics of the thermal environment - Instruments for measuring physical quantities. (ISO 7726:1998)

Danish Standards Foundation

DS/EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography
DS/EN 27726:1994 Thermal environments-Instruments and methods for measuring physical quantities
DS/EN ISO 7726:2001 Ergonomics of the thermal environment - Instruments for measuring physical quantities
DS/EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
DS/EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography
DS/EN ISO 7933:2004 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
DS 474 E:1995 Norm for specifikation af termisk indeklima

GSO

BH GSO ISO 7726:2017 Ergonomics of the thermal environment -- Instruments for measuring physical quantities
GSO ISO 7726:2016 Ergonomics of the thermal environment -- Instruments for measuring physical quantities
OS GSO ISO 7726:2016 Ergonomics of the thermal environment -- Instruments for measuring physical quantities
OS GSO ISO 10551:2015 Ergonomics of the thermal environment -- Assessment of the influence of the thermal environment using subjective judgement scales

CZ-CSN

CSN ISO 7726:1993 Thermal environments. Instruments and methods for measuring physical quantities
CSN 03 8011-1986 Environmental factors. Terms and definitions

SCC

NS-ISO 7726:1985 Thermal environments — Instruments and methods for measuring physical quantities
BS EN 27726:1994 Thermal environments. Instruments and methods for measuring physical quantities
DANSK DS/EN ISO 7726:2001 Ergonomics of the thermal environment - Instruments for measuring physical quantities
BS ISO 9022-21:1998 Optics and optical instruments. Environmental test methods-Combined low pressure and ambient temperature or dry heat
BS ISO 9022-2:1994 Optics and optical instruments. Environmental test methods-Cold, heat, humidity
NS-EN 14662-4:2005 Ambient air quality — Standard method for measurement of benzene concentrations — Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
DANSK DS/EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
AENOR UNE-EN ISO 7726:2002 Ergonomics of the thermal environment - Instruments for measuring physical quantities. (ISO 7726:1998)
NS-EN ISO 7726:2001 Ergonomics of the thermal environment — Instruments for measuring physical quantities (ISO 7726:1998)
NS-EN 14662-1:2023 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography
BS ISO 9022-18:1994 Optics and optical instruments. Environmental test methods-Combined damp heat and low internal pressure
AWWA ACE94070 Educating Customers About Lead in the Environment
DANSK DS/EN 14662-1:2005 Ambient air quality – Standard method for measurement of benzene concentrations – Part 1: Pumped sampling followed by thermal desorption and gas chromatography
DIN EN 14662-1 E:2022 Draft Document - Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German and English version prEN 14662-1:2022

Association Francaise de Normalisation

NF X35-202:1994 Thermal environments. Instruments and methods for measuring physical quantities.
NF X35-202*NF EN ISO 7726:2002 Ergonomics of the thermal environment - Instruments for measuring physical quantities
NF X10-800:1995 Marine environment-Oceanographic instrumentation-Guide for environmental tests
FD X43-070-5:2008 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 5 : Estimation of the uncertainties on measurements of benzene conducted in situ by pumping followed by a thermal desorption and
NF EN 14662-1:2005 Ambient air quality - Standard method for measuring benzene concentrations - Part 1: pump sampling followed by thermal desorption and a gas chromatography method
NF X10-811:1995 Marine environment-Oceanographic instrumentation-Environmental tests and recommendations for equipments in marine atmosphere
NF EN 14662-2:2005 Ambient air quality - Standard method for measuring benzene concentration - Part 2: sampling by pumping followed by solvent desorption and a gas chromatography method
NF EN ISO 7933:2005 Ergonomics of thermal environments - Analytical determination and interpretation of thermal stress based on the calculation of the predictable thermal stress
NF X43-029-1*NF EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1 : pumped sampling followed by thermal desorption and gas chromatography
NF EN 14662-4:2005 Ambient air quality - Standard method for measuring benzene concentrations - Part 4: diffusion sampling followed by thermal desorption and gas chromatography

RO-ASRO

STAS SR EN 27726-1996 Thermal environments - Instruments and methods for measuring physical quantities

International Organization for Standardization (ISO)

ISO 7726:1985 Thermal environments — Instruments and methods for measuring physical quantities
ISO/DIS 7726 Ergonomics of the thermal environment — Instruments for measuring and monitoring physical quantities
ISO/FDIS 7933 Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
ISO/FDIS 8025:2011 Ergonomics of the thermal environment : Management of working conditions in hot environments
ISO/DIS 8025 Ergonomics of the thermal environment : Management of working conditions in hot environments

European Committee for Standardization (CEN)

EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography
EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
EN 14662-1:2023 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography

GOST

GOST 33060-2014 Method of testing the chemicals hazardous to the environment. Adsorption-desorption using а batch equilibrium method

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 3743-1994 Vapor Compression Cycle with Solution Circuit and Desorber/Absorber Heat Exchange
ASHRAE HI-02-5-2-2002 University Combined Heat and Power (CHP) Systems: Exploring Technical@ Financial@ and Environmental Solutions

British Standards Institution (BSI)

BS EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by thermal desorption and gas chromatography
BS EN 14662-1:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by thermal desorption and gas chromatography
BS EN ISO 7726:2001(2002) Ergonomics of the thermal environment — Instruments for measuring physical quantities
BS EN ISO 7726:2001 Ergonomics of the thermal environment - Instruments for measuring physical quantities
BS EN 14662-4:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by thermal desorption and gas chromatography
BS EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by thermal desorption and gas chromatography
BS EN ISO 16017-1:2001 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Pumped sampling
BS ISO 9022-2:2002 Optics and optical instruments - Environmental test methods - Cold, heat and humidity
BS EN 14662-1:2023 Ambient air quality. Standard method for measurement of benzene concentrations. Pumped sampling followed by thermal desorption and gas chromatography
BS ISO 9022-2:1995 Optics and optical instruments - Environmental test methods - Cold, heat, humidity
BS EN ISO 16017-2:2003 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Diffusive sampling
BS IEC 61577-4:2009 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Equipment for the production of reference atmospheres containing radon isotopes and their decay products (STAR)
BS ISO 9022-18:1995 Optics and optical instruments. Environmental test methods. Combined damp heat and low internal pressure
BS EN ISO 14505-3:2006 Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Evaluation of thermal comfort using human subjects

AT-ON

ONORM EN 27726-1994 Thermal environments. Instruments and methods for measuring physical quantities (ISO 7726:1985)
OENORM EN ISO 7726:2021 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998)

German Institute for Standardization

DIN EN ISO 7726:2021-03 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998); German version EN ISO 7726:2001
DIN EN 14662-1:2022-09 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German and English version prEN 14662-1:2022 / Note: Date of issue 2022-07-29*Intended as r...
DIN EN 14662-4:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography; German version EN 14662-4:2005
DIN EN 14662-1:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German version EN 14662-1:2005 / Note: To be replaced by DIN EN 14662-1 (2022-09).
DIN EN ISO 10551:2002 Ergonomics of the thermal environment - Assessment of the influence of the thermal environment using subjective judgement scales (ISO 10551:1995); German version EN ISO 10551:2001
DIN EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German version EN 14662-1:2005
DIN EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography; German version EN 14662-4:2005
DIN EN ISO 16017-1:2001 Indoor, ambiant and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling (ISO 16017-1:2000); German version EN ISO 16017-1:2000
DIN EN ISO 7933:2004-12 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004); German version EN ISO 7933:2004 / Note: To be replaced by DIN EN ISO 7933 (2018-05), DIN ...

BE-NBN

NBN X 10-002-1986 Specifications relating to the appliances and methods
NBN-EN 27726-1994 Thermal environments. Instruments and methods for measuring physical quantities (ISO 7726:1985)

IN-BIS

IS 11121-1984 Pyrolysis Apparatus Specification Bimetallic

Japanese Industrial Standards Committee (JISC)

JIS H 7203:1995 Method for assessing the characteristics of cyclic hydrogen absorption/desorption of hydrogen absorbing alloys
JIS H 7203:2007 Method for measuremet of hydrogen absorption/desorption cycle characteristic of hydrogen absorbing alloys

SAE - SAE International

SAE ARP6287-2018 Environmental Degradation of Composite Materials

SE-SIS

SIS SS 64 12 21-1984 Surveying instruments - Environmental testing

Korean Agency for Technology and Standards (KATS)

KS B ISO 9022-21-2002(2017) Optics and optical instruments－Environmental test methods－Part 21：Combined low pressure and ambient temperature or dry heat
KS B ISO 9022-21-2002(2022) Optics and optical instruments－Environmental test methods－Part 21：Combined low pressure and ambient temperature or dry heat
KS B ISO 9022-21-2022 Optics and optical instruments－Environmental test methods－Part 21：Combined low pressure and ambient temperature or dry heat
KS A ISO 7933-2021 Ergonomics of the thermal environment－Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
KS A ISO 7933-2005(2021) Ergonomics of the thermal environment－Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
KS I ISO 16017-1-2023 Indoor, ambient and workplace air－Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/ capillary gas chromatography－Part 1：Pumped sampling

DIN

DIN EN 14662-1:2024 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German version EN 14662-1:2023

RU-GOST R

GOST 32382-2013 Testing of chemicals of environmental hazard. Hydrolysis