Metal potentiometer

Metal potentiometer, Total:358 items.

The international standard classification for "Metal potentiometer" includes: Hydraulic energy engineering , Wires , Corrosion of metals , Fluorescent lamps. Discharge lamps , Electrical equipment of ships and of marine structures , Other non-ferrous metals and their alloys , Metallic coatings , Chemical analysis of metals , Diagnostic, maintenance and test equipment , Mechanical testing of metals , Petroleum products in general , Surface treatment , Equipment for processing of minerals , Other mining equipment , Occupational safety. Industrial hygiene , Measurement of fluid flow , Electricity. Magnetism. Electrical and magnetic measurements , Equipment for petroleum and natural gas industries in general , Exploratory and extraction equipment .

The Chinese standard classification for "Metal potentiometer" includes: Water power engineering , Power station engineering , Wire with insulation layer , Electronic components , Pipe fittings, clamps and seals , Mechanical gadgets and components , Hot processing technology , Metal chemical property test method , Electric light source products , Electrical installation parts for vessel , Precious metals and their alloys , Material Protection , Steel and iron alloy analysis method , Highway vehicle servicing installation , Metal mechanical property test method , Petroleum products in general , Washing equipment , Material and component for instrument and meter , Hygiene, safety and labor protection , Hygiene, safety and labor protection , Precious metals and its alloy analysis method , Mechanics Measurement , Electromagnetic Measurement , Operating equipment, instrument and meter , Petroleum drilling & production equipment and instrument , Technical management , Vessel materials and their inspection methods .

Professional Standard - Energy and Power Planning

DL/T 5060-1996 Standard for furnishing instruments, apparatus and architectural area of metallic laboratory in fossil fuel power plant
DL/T 1104-2009 Potentiometric Readout
DL/T 2220-2021 Technical specifications for instrumented indentation method for testing mechanical properties of metal materials in power stations
DL/T 1104-2024 Potentiometer type instrument measuring instrument
DL/T 1273-2013 Photoelectric Type (CCD) Remote Reading Bimetal Benchmark Station

Professional Standard - Military and Civilian Products

WJ 651-1995 Specification for non-ferrous alloy metal mold castings for optical instruments
WJ 456-1995 Metal coating. Specifications for chromium electroplated coatings of optical instrument
WJ 461-1995 Metal coating. Specifications for ferrous metal oxidizing coatings of optical instrument
WJ 2016-1991 Metallic and non-metallic coatings Stainless steel passivation film for military optical instruments
WJ 1855-1989 Gold electroplating for metal cladding optical instruments
WJ 467-1995 Metal and non-metal coatings Pre-painting surface preparation for optical instrument
WJ 458-1995 Metal coating. Specifications for zinc electroplated coatings of optical instrument
WJ 466-1995 Metal coating. Specifications for paint coatings of optical instrument
WJ 454-1995 Metal coating. Specifications for black nickel electroplated coatings of optical instrument
WJ 2015-1991 Aluminum and aluminum alloy chemical conversion coatings for metal and non-metal coatings for military optical instruments
WJ 460-1995 Metal coating. Specifications for tin electroplated coatings of optical instrument
WJ 459-1995 Metal coating. Specifications for silver electroplated coatings of optical instrument
WJ 465-1995 Metal coating. Specifications for copper electroplated coatings of optical instrument
WJ 455-1995 Metal coating. Specifications for nickel electroplated coatings of optical instrument
WJ 457-1995 Metal coating. Specifications for cadmium electroplated coatings of optical instrument
WJ 464-1995 Metal coating. Specifications for ferrous metal phosphate coating coatings of optical instrument

Professional Standard - Aviation

HB 8281-2002 Metal plain bush used for instrument (8281)
HB 8282-2002 Non-metal bush with flange for instrument
HB 5291-1984 Precious Alloy Wire Packeted with Oil Paint Used for Aviation Potentiometer
HB 8278-2002 Metal plain bush used for instrument (8278)
HB 8110-2002 Nonmetal smooth bush
HB 8280-2002 Metal plain bush used for instrument (8280)
HB 8276-2002 Metal plain bush used for instrument (8276)
HB 6383-1989 Small-sized rectangular electrical connector for locating metal shell
HB 5187-1996 Bare wires of precious metals and their alloy potentiometers for aviation
HB 8279-2002 Metal plain bush used for instrument (8279)
HB/Z 352-2002 Stabilizing treatment for metallic parts of precise equipment & instrument for aviation
HB 5187-1981 Bare wires of precious metals and their alloy potentiometers for aviation
HB 8277-2002 Metal plain bush used for instrument (8277)

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 32550-2016 Corrosion of metals and alloys―Determination of the critical pitting temperature under potentiostatic control
GB/T 24196-2009 Corrosion of metals and alloys—Electrochemical test methods—Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
GB/T 13825-2008 Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area
GB/T 15072.5-2008 Test method of precious metal alloys - Determination of silver content for gold and palladium alloys - Potentionmeter titration with potassium iodide
GB/T 15072.5-2008(英文版) Test method of precious metal alloys—Determination of silver content for gold and palladium alloys—Potentionmeter titration with potassium iodide
GB/T 29088-2012 Corrosion of metals and alloys—Electrochemical potentiokinetic reactivation measurement using the double loop method
GB/T 33570-2017 Four-wheel aligner
GB/T 24213-2009 General rules for original position statistic distribution analysis method
GB/T 19780-2005 Capacity calibration of spherical metal tank - Total station external measuring method
GB/T 11378-2005 Metallic coatings - Measurement of costing thickness-Profilometric method
GB/T 15072.1-2008 Test method of precious alloys - Determination of gold content for gold platinum and palladium alloys - Potentiometric titration using ferrous sulfate
GB/T 17899-2023 Corrosion of metals and alloys—Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
GB/T 35705-2017 Acoustic positioning system
GB/T 22935-2008 Metal-halide lamps for projecting apparatus
GB/T 37619-2019 Corrosion of metals and alloys—Potentiostatic test and evaluation method for determination of susceptibility to grooving corrosion of high frequency electric resistance welded steel pipes
GB/T 15072.2-2008(英文版) Chemical analysis methods for precious metal alloys - Determination of silver content in silver alloys - Sodium chloride potentiometric titration method
GB/T 8654.7-1988 Methods for chemical analysis of manganese metal--The potentiometric titration method for the determination of manganese content
GB/T 15072.2-2008 Test method of precious metal alloys - Determination of silver contents for silver alloys - Potentionmeter titration with sodium chloride
GB/T 21838.4-2008 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
GB/T 21838.4-2020 Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 4: Test method for metallic and non-metallic coatings

Military Standard of the People's Republic of China-General Armament Department

GJB 8674-2015 General specification for multi-metal dewars for thermal imaging cameras
GJB 955A-2021 Specifications for bare wire materials for potentiometer windings of precious metals and their alloys
GJB 955-1990 Precious metals and their alloy potentiometer winding bare wires for aerospace use
GJB 955A-2003 Specifications for bare wire materials for potentiometer windings of precious metals and their alloys

Group Standards of the People's Republic of China

T/ZJCX 0023-2022 Metal cold heading multi station intelligent forming machine
T/CSTM 00900-2023 Calibration specification for food heavy metal analyzer
T/SAS 0022-2023 Marine potentiostat
T/JSEE 002-2020 Technical guidelines for live location of grounding defects in metal sheath of high-voltage cables
T/CBMMAS 009-2022 Spatial potential sleep aid product and evaluation method
T/SCS 000018-2024 Portable Spectroscopy for Heavy Metals in Water Based on Solution Cathode Glow Discharge
T/SXCAA 034-2024 Automatic Potentiometric Titrator Period Verification Procedure

Guangxi Provincial Standard of the People's Republic of China

DB45/T 1489-2017 Energy consumption quota per unit product of electrolytic manganese metal

Professional Standard - Machinery

JB/T 5326-1991 Test Method of Crevice Corrosion of Metallic Material for Instrument
JB/T 11117-2010 Metal detector for separate material
JB/T 6819.6-1993 Instrument Material Terminology - Expansion Alloy, Thermal Bimetal, Electrical Vacuum Material and Sealing Material
JB/T 11605-2013 Non-destructive testing instruments — Metal magnetic memory instrument - technical requirments
JB/T 11606-2013 Non-destructive testing instruments — Metal magnetic memory instrument - Performance testing method

Professional Standard-Safe Production

AQ/T 2051-2016 General technical requirements of personnel regional positioning system in metal and nonmetal underground mine
AQ 2032-2011 Regulations for the Construction of Personnel Regional Positioning System in Metal and Nonmetal Underground Mine
AQ/T 2080-2023 Safety inspection-testing specification of the system for the positioning of the personnel in metal and nonmetal underground mine
AQ/T 2064-2018 The applicable guide of standardized specification of work safetyfor geological exploration of metal and nonmetal mineral resourc

Professional Standard - Ocean

HY/T 192-2015 Test method of potentiodynamic polarization resistance of metallic materials in seawater

Professional Standard - Non-ferrous Metal

YS/T 372.1-2006 Methods for elementary analysis of precious alloy -- Determination of silver content -- Potentiometer titration with potassium iodide
YS/T 1543-2022 The norm of energy consumption per unit production of lithium
YS/T 372.14-1994 Methods for elementary analysis of precious alloy. Determination of manganese content. Potentiometer titration using potassium permanganate
YS/T 372.14-2006 Methods for elementary analysis of precious alloy -- Determination of magnesium content -- Potentiometer titration using potassium permanganate
YS/T 1433-2021 Energy consumption limit per unit product of precious metal smelting in the non-ferrous metal industry
YS/T 372.1-1994 Methods for elementary analysis of precious alloy. Determination of silver content. Potentiometer titration with potassium iodide

National Metrological Verification Regulations of the People's Republic of China

JJG 988-2004 Verification Regulation of Vertical Metal Tank Diametrical Deviation Measuring Instrument
JJG 505-2004 Verification Regulation of D.C.Comparator potentiometers
JJG(交通) 027-2004 Water Transport Engineering-Nonmetal Ultrasonic Detector
JJG 814-2015 Verification Regulation of Automatic Potentiometric Titrators
JJG 027-2015 Non-metallic acoustic wave detector for water transport engineering
JJG 800-1993 Verification Regulation of Potential Stripping Analyzer
JJG(交通) 027-2015 Water Transport Engineering.Nonmetal Ultrasonic Detector
JJG 814-1993 Verification Regulation of Automatic Potentiometric Titrator

Professional Standard - Traffic

JT/T 576-2004 Water transport engineering - Nonmetal ultrasonic detector
JT/T 576-2015 Water Transport Engineering - Nonmetal Ultrasonic Detector
JT/T 504-2024 Wheel alignment instrument
JT/T 504-2004 Front - Wheel alignmenter
JT/T 505-2004 Four-wheel alignmenter

Professional Standard - Petroleum

SY 6973-2013 Petroleum Rock Induced Polarization Potential Measuring Instrument
SY/T 6973-2013 Petroleum Core Induced Polarization Potential Measurement Instrument
SY/T 6368-1998 Detector on buried metal pipelines anti - Corrosion coating faults
SY 6368-1998 Underground metal pipeline anti-corrosion layer leak detector
SY/T 7326-2016 General technical conditions for potentiostats

Professional Standard - Geology

DZ 57.9-1987 Time quota for geological instruments and meters industry - Non-ferrous metal casting
DZ/T 0101.9-1994 Manufacture time quata for geological instrument meter - cast of nonferrous metal

Professional Standard-Ships

CB* 3220-1984 Technical Specifications for Marine Potentiostat
CB 1085.1-1989 Non-ferrous metal sand casting with man-hour quota for instrumentation manufacturing
CB 3220-1984 Specifications for marine potentiostat

Hebei Provincial Standard of the People's Republic of China

DB13/T 5721-2023 Specifications for construction of high-precision personnel positioning system for metal and non-metal underground mines

Professional Standard - Environmental Protection

HJ 1208-2021 Self-monitoring technology guidelines for pollution sources -Non-ferrous metal metallurgy industry-secondary non-ferrous metal

Hunan Provincial Standard of the People's Republic of China

DB43/T 401-2020 Energy consumption quota and calculation method per unit product of electrolytic manganese metal

Shandong Provincial Standard of the People's Republic of China

DB37/T 2853-2016 Specification for safety inspection and inspection of in-service personnel positioning system in metal and nonmetal underground mines
DB37/T 4640-2023 Guidelines for in-situ remediation of heavy metal contaminated sediments

National Metrological Technical Specifications of the People's Republic of China

JJF 1565-2016 Calibration Specification for Water Quality On-line Analyzers of Heavy Metals
JJF 1090-2002 Calibration Specification for Nonmetal Building Materials Plastic Limit Measuring Instruments

Professional Standard - Energy

DL/T 2850-2024 Gas-Insulated Metal-Enclosed Transmission Line Breakdown Discharge Monitoring and Location Guide

Jilin Provincial Standard of the People's Republic of China

DB22/T 1930-2013 Metal Rockwell Hardness Tester Depth Sounding Device Detector

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 5372-2005 Metal material dynamic impact test-instrumental method

Taiwan Provincial Standard of the People's Republic of China

CNS 7387-1981 Method for analysis of radioisotopes - Heavy metals spot test

Hubei Provincial Standard of the People's Republic of China

DB42/T 1681-2021 Calibration technical specification for lightning location detector

Spanish Association for Standardization (UNE)

UNE-EN 23909:1993 HARDMETALS. DETERMINATION OF COBALT. POTENTIOMETRIC METHOD. (Endorsed by AENOR in January of 1994.)
UNE-EN ISO 17475:2009 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005/Cor 1:2006)
AENOR UNE-EN ISO 17475:2009 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005/Cor 1:2006)
UNE 20-099-1990 Instruments under metal packaging for alternating current with voltage greater than 1kV and less than or equal to 72.5kV
UNE-EN ISO 17864:2009 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005)
AENOR UNE-EN ISO 17864:2009 Corrosion of metals and alloys - Determination of the critical pitting temperature under potentiostatic control (ISO 17864:2005)
UNE-EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) (ISO 12732:2006) (Endorsed by AENOR in June of 2008.)

British Standards Institution (BSI)

BS EN 23909:1994 Hardmetals. Determination of cobalt. Potentiometric method
BS ISO 19376-1:2025 Jewellery and precious metals. Vocabulary - Precious metals and units
BS 3466:1962 Methods of test for resistance per unit length of metallic electrical resistance material
BS ISO 17475:2005 Corrosion of metals and alloys. Electrochemical test methods. Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
BS 1244-1:1956 Metal sinks for domestic purposes-Imperial units with metric equivalents
BS 1244-2:1972 Metal sinks for domestic purposes. Metric units
BS EN ISO 17864:2008 Corrosion of metals and alloys. Determination of the critical pitting temperature under potientiostatic control
BS ISO 17864:2005 Corrosion of metals and alloys. Determination of the critical pitting temperature under potentiostatic control
BS EN ISO 17864:2006 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
24/30472584 DC BS ISO 19376-1 Jewellery and precious metals - Vocabulary - Part 1: Precious metals and units
BS ISO 15158:2014 Corrosion of metals and alloys. Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
12/30215316 DC BS ISO 15158. Corrosion of metals and alloys. Method of measuring the pitting potential for stainless steels by potentiokinetic control in sodium chloride solution
BS ISO 17864:2006 Corrosion of metals and alloys - Determination of the critical pitting temperature under potentiostatic control
BS EN ISO 14577-4:2007 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method for metallic and non-metallic coatings
BS EN ISO 14577-4:2016 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method for metallic and non-metallic coatings
BS EN ISO 1797-1:2011 Dentistry. Shanks for rotary instruments. Shanks made of metals
BS EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
BS EN ISO/ASTM 52909:2024 Additive manufacturing of metals. Finished part properties. Orientation and location dependence of mechanical properties for metal parts
BS EN ISO 17475:2006 Corrosion of metals and alloys. Electrochemical test methods. Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
BS EN ISO /ASTM 52909:2024 Additive manufacturing of metals. Finished part properties. Orientation and location dependence of mechanical properties for metal parts
BS EN ISO 11427:2024 Jewellery and precious metals. Determination of silver. Potentiometry using potassium bromide
BS ISO 12732:2006 Corrosion of metals and alloys. Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
BS EN ISO 4518:1980 Metallic coatings - Measurement of coating thickness - Profilometric method
BS ISO 18089:2015 Corrosion of metals and alloys. Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control
BS 3680-9B:1981 Methods of measurement of liquid flow in open channels. Water level instruments-Float-operated water level recorders (mechanical and electromechanical)
BS EN ISO/ASTM 52909:2022 Additive manufacturing of metals. Finished part properties. Orientation and location dependence of mechanical properties for metal powder bed fusion
05/30091636 DC ISO 14577-4. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 4. Test method for metallic and non-metallic coatings
BS EN ISO 14577-3:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
BS EN 13523-3:2014 Coil coated metals. Test methods. Colour difference. Instrumental comparison
BS EN 13523-3:2001 Coil coated metals - Test methods - Colour difference - Instrumental comparison
BS EN 13523-3:2021 Coil coated metals. Test methods. Colour difference and metamerism. Instrumental comparison
BS EN ISO 14577-3:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks

Association Francaise de Normalisation

NF EN 23909:1994 Hard metals - Determination of cobalt - Potentiometric method
NF A05-403*NF EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements.
NF ISO 19376-1:2025 Jewellery and precious metals - Vocabulary - Part 1 : precious metals and units
NF A91-149*NF EN ISO 15720:2001 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography.
NF A05-119*NF EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
NF A05-207*NF ISO 15158:2014 Corrosion of metals and alloys - Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
NF EN ISO 11427:2024 Jewellery and precious metals - Determination of silver - Potentiometry using potassium bromide
NF A06-202*NF EN ISO 11427:2024 Jewellery and precious metals - Determination of silver - Potentiometry using potassium bromide
NF A03-155-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4 : test method for metallic and non-metallic coatings.
NF A03-155-4*NF EN ISO 14577-4:2017 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4 : test method for metallic and non-metallic coatings
NF A05-172*NF ISO 18089:2016 Corrosion of metals and alloys - Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control
NF E63-517:1986 Material of moulding and extrusion. Metal mould components. Location pins.
NF E66-307*NF ISO 883:2014 Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole - Dimensions
NF EN ISO 1460:2020 Metallic coatings - Hot-dip galvanizing coatings on ferrous metals - Gravimetric determination of mass per unit area

Swedish Institute for Standards

SIS SS IEC 250:1982 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
SIS SS IEC 248:1988 Nuclear instrumen ta tion — Dimensions of planchets usedin nuclear electronic instruments
SS-ISO 17475:2005 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarisation measurements (ISO 17475:2005,IDT)
SS-ISO 17864:2005 Corrosion of metals and alloys - Determination of the critical pitting temperature under potentiostatic control (ISO 17864:2005, IDT)
SS-EN 60523:1994 Electrical measuring instruments - Direct-current potentiometers
SS-EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005/Cor 1:2006)
SS-EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potentiostatic control (ISO 17864:2005)
SS-ISO 15158:2014 Corrosion of metals and alloys - Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution (ISO 15158:2014, IDT)
SIS SS-EN 10 071-1989 Chemical analysis of ferrous materials — Determination of manganese in steels and irons — Electrometric titration method
SIS SS 01 66 02-1982 Swedish metal standards - Quantities and units - Symbols and designations

U.S. Air Force

AIR FORCE A-A-58033-1994 REFLECTOMETER, METALLIC, TIME DOMAIN

Korean Agency for Technology and Standards (KATS)

KS D ISO 17475-2017(2022) Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
KS D ISO 17475-2017 Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
KS B 5551-2019 Impact testing machines for metallic materials－Instrumentation
KS B 5551-2024 Impact testing machines for metallic materials－Instrumentation
KS D ISO 17475-2023 Corrosion of metals and alloys — Electrochemical test methods — Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
KS B 5551-2004(2024) Impact testing machines for metallic materials－Instrumentation
KS B 5551-2004(2019) Impact testing machines for metallic materials－Instrumentation
KS D ISO 14577-4:2011 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 4:Test method for metallic and non-metallic coatings
KS D ISO 14577-4-2021 Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 4：Test method for metallic and non-metallic coatings
KS D ISO 17475:2017 Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
KS D ISO 17475:2008 Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
KS B 5551-2004 Impact testing machines for metallic materials－Instrumentation
KS D ISO 14577-4-2011(2016) Metallic materials － Instrumented indentation test for hardness and materials parameters － Part 4: Test method for metallic and non-metallic coatings
KS D ISO 14577-4-2011(2021) Metallic materials － Instrumented indentation test for hardness and materials parameters － Part 4: Test method for metallic and non-metallic coatings
KS D ISO 4518-2012(2017) Metallic coatings－Measurement of coating thickness－Profilometric method
KS C 5393-4-2001 Potentiometers for use in electronic equipment － Part 4: Sectional specification: Single － turn rotary power potentiometers

Ente Nazionale Italiano di Unificazione

UNI EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
UNI ISO 3909:1987 Sintered metal carbides. Determination of cobalt. Potentiometric method
UNI CEI 6:1992 Cathodic protection of buried metallic structures.Potential measurements.
UNI 5975-1967 Methods for chemical analysis of ferrous metal materials. Determination of copper and lead in wear-resistant white metals. controlled potential electrolysis
UNI EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
UNI EN ISO 7539-7:1997 Corrosion of metals and alloys. Stress corrosion testing. Slow strain rate testing.
UNI 5976-1967 Methods for chemical analysis of ferrous metal materials. Determination of copper in wear-resistant white metals, lead alloys for printing and tin-lead soldering alloys. controlled potential electrolysis
UNI EN ISO 11427:2024 Jewellery and precious metals - Determination of silver - Potentiometry using potassium bromide
UNI 6772-1970 Casting tools. Positioning bolts for metal profile plates
UNI 10166:1993 Cathodic protection of buried metallic structures. Test posts.
UNI EN ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
UNI EN ISO 14577-4:2017 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
UNI EN 13523-3:2001 Coil coated metals - Test methods - Colour difference - Instrumental comparison

International Organization for Standardization (ISO)

ISO 17475:2005 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
ISO 19376-1:2025 Jewellery and precious metals — Vocabulary — Part 1: Precious metals and units
ISO 17475:2005/cor 1:2006 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements; Technical Corrigendum 1
ISO 15158:2014 Corrosion of metals and alloys - Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
ISO/PRF 11427:2024 Jewellery and precious metals — Determination of silver — Potentiometry using potassium bromide
ISO/DIS 11427 Jewellery and precious metals — Determination of silver in silver alloys — Potentiometry using potassium bromide
ISO 17864:2005 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
ISO 4518:1980 Metallic coatings; Measurement of coating thickness; Profilometric method
ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
ISO/DIS 13756 Jewellery and precious metals — Determination of silver in silver alloys — Potentiometry using sodium chloride or potassium chloride
ISO 14577-4:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
ISO 18089:2015 Corrosion of metals and alloys - Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control
ISO 1460:1992 Metallic coatings; hot dip galvanized coatings on ferrous materials; gravimetric determination of the mass per unit area

Canadian General Standards Board （CGSB)

CAN/CGSB 8.2-M88-1988 Wire cloth control sieves, metric

Bureau of Indian Standards

IS 5901-1970 Specification for bimetallic thermal imaging cameras
IS 11121-1984 Pyrolysis Apparatus Specification Bimetallic
IS 7265-1973 Coating materials (metals, alloys and dielectrics) used in the optical instrument industry
IS 17144-4-2019 Metallic Materials —— Instrumented Indentation Test for Hardness and Materials Parameters Part 4 Test Method for Metallic and Non-Metallic Coatings

Czech Standards Institute (UNMZ)

CSN 42 0890 Cast.8-1981 Testing of metal powders. Determination of water content in metal powders by elektrometric titration
CSN 25 0252-1964 Calibration of machines for creep testing of metals.
CSN 42 0648 Cast.1-1986 Chemical analysis of metallic chromium. Determination of chromium by the potentiometric titration
CSN 42 0624-1987 Chemical analysis of non-ferrous metals and alloys. Nonferrous metals and alloys. Determination of sulphur by automatic analyzers
CSN 42 0611 Cast.7-1986 Chemical analysis of non-ferrous metals. Copper-base bearing metals. Determination of silver by the potentiometric method and atomic absorption method
CSN ISO 4518:1994 Metallic coatings. Measurement of coating thickness. Profilometric method
CSN 42 0348-1977 Metallic materials. Method for crack opening dixplacement (CUD) testing

Magyar Szabványügyi Testület

MSZ KGST 1185-1978 Location diagram of metal spring
MSZ 18096/8-1982 Potential measurement of buildings with corrosion hazards of underground metal electrical equipment
MNOSZ 13981-1954 Pressure measuring instruments, low pressure measuring instruments, low pressure and pressure measuring instruments made of metal film
MNOSZ 15596-1953 water level measuring instrument
MNOSZ 1733-1951 metal cable
MNOSZ 22306-1955 water level measuring instrument

National Standardisation Body (ASRO)

STAS 2426-1988 RIGID METALLIC MEASURING RODS
STAS 7365-1974 METAL WELDING Fundamental welding positlons
STAS 11587-1983 Metal welding FLUX CORED WIRES FOR WELDING AND SURFACING
STAS E 12803-1990 Tests of metals CRACK OPENING DISPLACEMENT TESTING
STAS SR ISO 1797-1:1992 Dental rotary instrumente - Shahks Part 1: Shanks made of metals

Japanese Industrial Standards Committee (JISC)

JIS B 7755:2011 Charpy pendulum impact test for metal -- Instrumentation
JIS B 5111:2000 Locating rings of moulds for plastics
JIS B 5111:1994 Locate rings of moulds for plastics
JIS B 7741:1991 Extensometers used in metallic material tensile testing
JIS B 7755:1993 Impact testing machines for metallic materials -- Instrumentation
JIS T 5504-1:2001 Dental rotary instruments -- Shanks -- Part 1: Shanks made of metals
JIS C 4902:1998 High voltage power capacitors and attached apparatus
JIS T 5504-1:2014 Dental rotary instruments .Shanks.Part 1: Shanks made of metals

European Committee for Standardization (CEN)

EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
CEN EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005)
prEN ISO 11427 Jewellery and precious metals - Determination of silver in silver alloys - Potentiometry using potassium bromide (ISO/DIS 11427:2023)
EN ISO 11427:2024 Jewellery and precious metals - Determination of silver - Potentiometry using potassium bromide (ISO 11427:2024)

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 17475:2013 Corrosion of metals and alloys -- Electrochemical test methods -- Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
OS GSO ISO 17864:2013 Corrosion of metals and alloys -- Determination of the critical pitting temperature under potientiostatic control
OS GSO ISO 14577-4:2014 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 4: Test method for metallic and non-metallic coatings
OS GSO ISO 12732:2014 Corrosion of metals and alloys -- Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)

German Institute for Standardization

DIN EN ISO 17475:2008-07 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005+Cor. 1:2006); German version EN ISO 17475:2008
DIN 4967-1:1987 Indexable hard metal cutting disc
DIN EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005+Cor. 1:2006); English version of DIN EN ISO 17475:2008-07
DIN 12893:1976 Metal laboratory ware; stand rods
DIN EN ISO 17475 E:2007 Draft Document - Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005); German version prEN ISO 17475:2007
DIN EN ISO 17475 E:2007-12 Draft Document - Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005); German version prEN ISO 17475:2007
DIN 12895-2:1978 Metal laboratory ware; hook connector
DIN 12894:1997 Metal laboratory ware - Clamps
DIN EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005);English version of DIN EN ISO 17864:2008-07
DIN EN ISO 17864:2008-07 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005); German version EN ISO 17864:2008
DIN EN ISO 21968:2005-10 Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method (ISO 21968:2005)
DIN EN ISO 11427:2024-08 Jewellery and precious metals - Determination of silver - Potentiometry using potassium bromide (ISO 11427:2024)
DIN EN ISO 14577-4:2017-04 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016); German version EN ISO 14577-4:2016
DIN EN ISO 7153-1:2001 Surgical instruments - Metallic materials - Part 1: Stainless steel (ISO 7153-1:1991, including Amendment 1:1999); English version of DIN EN ISO 7153-1:2001-02
DIN EN ISO 11427:2023 Jewellery and precious metals - Determination of silver in silver alloys - Potentiometry using potassium bromide (ISO/DIS 11427:2023); German and English version prEN ISO 11427:2023
DIN EN ISO 11427:2023-03 Jewellery and precious metals - Determination of silver in silver alloys - Potentiometry using potassium bromide (ISO/DIS 11427:2023); German and English version prEN ISO 11427:2023 / Note: Date of issue 2023-02-17*Intended as replacement for DIN EN IS...
DIN EN ISO 14577-4 E:2015-05 Instrumental indentation tests for hardness and material parameters of metallic materials Part 4: Test methods for metallic and non-metallic coatings (draft)
DIN EN ISO 12732:2008-07 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) (ISO 12732:2006); German version EN ISO 12732:2008
DIN 53531-1:1972 Testing the adhesion of elastomers to metal bonds using a sheet of metal
DIN EN ISO 17864 E:2007-12 Draft Document - Corrosion of metals and alloys - Determination of critical pitting temperature under potentiostatic control (ISO 17864:2005); German version prEN ISO 17864:2007
DIN EN ISO 17864 E:2007 Draft Document - Corrosion of metals and alloys - Determination of critical pitting temperature under potentiostatic control (ISO 17864:2005); German version prEN ISO 17864:2007
DIN EN ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2007); English version of DIN EN ISO 14577-4:2007-08
DIN 50157-1:2008 Metallic materials - Hardness testing with portable measuring instruments operating with mechanical penetration depth - Part 1: Test method
DIN EN ISO 11427:2024 Jewellery and precious metals - Determination of silver - Potentiometry using potassium bromide (ISO 11427:2024)

Danish Standards Foundation

DANSK DS/EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
DS/EN ISO 17475:2009 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
DS/EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
DANSK DS/EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control
DANSK DS/ISO 11427:2024 Jewellery and precious metals – Determination of silver – Potentiometry using potassium bromide
DS/EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
DS/EN ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
DANSK DS/EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)

American Water Works Association (AWWA)

AWWA C700-2020 Cold-Water Meters - Displacement Type, Metal Alloy Main Case
ANSI/AWWA C700-2020 Cold-Water Meters— Displacement Type, Metal Alloy Main Case
ANSI/AWWA C700-2024 Cold-Water Meters—Displacement Type, Metal Alloy Main Case
AWWA C700-2015 Cold-Water Meters - Displacement Type, Metal Alloy Main Case

Gosstandart of Russia

GOST 16249-1970 Chill moulds. Fixator of metal cores. Construction and dimensions
GOST 19126-1979 Medical metallic instruments. General specifications
GOST 27880-1988 Sectional gas-fired furnaces for iron-and-steel heating. Specific energy consumption
GOST 11679.2-2019 Rubber-metal instrument shock-absorbers. Fittings. Specifications
GOST 11679.2-1976 Rubber-metal shock-absorbers for instruments. Fitting. Specifications
GOST 8.398-1980 State system for ensuring the uniformity of measurements. Hardness testing machines for metals and alloys. Methods and means of verification
GOST 20340-1974 Metal casting patterns. Fixing patterns by pins on metal pattern plates. Design and dimensions
GOST 27843-2006 Test code for machine tools. Determination of accuracy and repeatability of positioning numerically controlled axes
GOST 27843-1988 Metalcutting machine tools. Test methods for positioning accuracy
GOST 11679.1-2018 Rubber-metal instrument shock-absorbers. Specifications
GOST 11679.1-1976 Rubber-metal shock-absorbers for instruments. Specifications
GOST 8.044-1980 State system for ensuring the uniformity of measurements. Diamond indentors of the hardness testing machines for metal and alloys. Verification methods and means

Lithuanian Standards Office

LST EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005/Cor 1:2006)
LST EN ISO 17864:2008 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005)

Defense Logistics Agency

DLA MIL-N-3336 A-1964 NUT, SHEET SPRING, INSTRUMENT MOUNTING
DLA MIL-N-3336 A (2)-1973 NUT, SHEET SPRING, INSTRUMENT MOUNTING
DLA MIL-N-3336 A NOTICE 2-2000 NUT, SHEET SPRING, INSTRUMENT MOUNTING
DLA MIL-N-3336 A VALID NOTICE 1-1991 NUT, SHEET SPRING, INSTRUMENT MOUNTING
DLA SMD-5962-87763 REV A-2004 MICROCIRCUIT, LINEAR, CMOS, DUAL 12-BIT, DIGITAL-TO-ANALOG CONVERTER, MONOLITHIC SILICON
DLA SMD-5962-89446-1991 MICROCIRCUIT, DIGITAL, CMOS, 8-BIT VARIABLE LENGTH SHIFT REGISTERS, MONOLITHIC SILICON
DLA SMD-5962-89462 REV B-2005 MICROCIRCUIT, DIGITAL, HIGH SPEED CMOS, 16-BIT AND 8/16-BIT MICROPROCESSOR MONOLITHIC SILICON

General Motors do Brasil

GMSA EMS 9309663-2011 Metal - metal adhesive - medium resistance - high tixotropy - medium expansion Adesivo metal-metal - m閐ia resist阯cia - alta tixotropia - m閐ia expans鉶 Do Not use on New Programs; No Replacement

Standards Norway

NS-EN ISO 17475:2008 Corrosion of metals and alloys — Electrochemical test methods — Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005/Cor 1:2006)
NS-EN ISO 17864:2008 Corrosion of metals and alloys — Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005)
NS-EN ISO 11427:2024 Jewellery and precious metals - Determination of silver - Potentiometry using potassium bromide (ISO 11427:2024)

South African Bureau of Standard

CKS 160-1971 Non-metallic sanitary pails

Standard Association of Australia （SAA）

AS 1184:1972 Preferred metric sizes of ferrous and non-ferrous plates - Metric units
AS 1713D:1974 1-litre glass milk bottles of the metal foil cap type Metric Units

U.S. Military Regulations and Norms

ARMY MIL-P-48494 A-1995 POSITIONER, MIRROR, AZIMUTH
ARMY MIL-P-48494 A REINST NOTICE 2-2000 POSITIONER, MIRROR, AZIMUTH

American Society for Testing and Materials (ASTM)

ASTM B636-84(2001) Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
ASTM E251-92(2003) Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
ASTM B636-84(2006)e1 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
ASTM B636-84(1992)e1 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
ASTM E608/E608M-24 Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples
ASTM B636-84(2010) Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
ASTM F2939-13(2019) Standard Specification for High Voltage Phasing Testers
ASTM F2939-13(2019)e1 Standard Specification for High Voltage Phasing Testers
ASTM F2939-13 Standard Specification for High Voltage Phasing Testers
ASTM F2939-13(2025) Standard Specification for High Voltage Phasing Testers

GM Europe

GME GMI 60459-2010 Voltage potential measurements between organic and metallic materials (English/German)

Belgian Standards Institute

NBN C 73-215-1979 Household appliances, similar instruments and accessories
NBN EN ISO 3868:1995 Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam nterferometry method (ISO 3868:1976)
NBN I 07-003-1986 Metal anti-corrosion protective layer (by hot electroplating of ferrous metals). Determination of the amount of zinc coating per unit area. gravimetry

Indonesia Standards

SNI 06-6596-2001 Water treatment for metal analysis by atomic absorption spectrophotometers

Electronic Components, Assemblies and Materials Association

ECA 377-1970 Metallized Dielectric Capacitors in Metallic and Non-Metallic Cases for Direct Current Application ANSI C83.62-71

GCC Standardization Organization

GSO ISO 10097-1:2013 Wireline diamond core drilling equipment – System A – Part 1: Metric units
GSO ISO 18089:2021 Corrosion of metals and alloys — Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control
GSO IEC 62374-1:2013 Semiconductor devices - Part 1: Time-dependent dielectric breakdown (TDDB) test for inter-metal layers

Society of Automotive Engineers (SAE)

SAE J339-1994 Seat Belt Hardware Webbing Abrasion Test Procedure
SAE AGS2119-1-1962 AGS2119 Cap, Sealing - Deep Drawn B.S.P.F. - Metal. (For Inhibited Units)

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 12732:2016 Corrosion of metals and alloys -- Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
BH GSO ISO 18089:2022 Corrosion of metals and alloys — Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control