In Vitro Test System Validation

In Vitro Test System Validation, Total:389 items.

The international standard classification for "In Vitro Test System Validation" includes: Fire-fighting , Laboratory medicine , Energy and heat transfer engineering in general , Thermal and sound insulating materials , On-board equipment and instruments , Product and company certification. Conformity assessment .

The Chinese standard classification for "In Vitro Test System Validation" includes: Medical laboratory equipment , Fire-fighting equipment and devices , Marking, packaging, transport and storage in general , Technical management , Heat insulation, sound absorption, light fireproof material , Basic standards and general methods , Spacecraft telemetering and remote sensing system , Takeoff and landing devices .

Professional Standard - Commodity Inspection

SN/T 3526-2013 Chemicals - Validation basic requirements of alternative methods for in vitro toxicological testing
SN/T 3898-2014 Guidance on the validation and acceptance of cosmetics alternative testing methods in vitro

Professional Standard - Medicine

YY/T 0690-2008 Clinical laboratory testing and in vitro medical devices—Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 30256-2013 Technical Requirements of Measurement and Verification of Energy Savings, Pumped Liquid Delivery System
GB/T 35169-2017 Test method of weatherability for external thermal insulation composite systems of building
GB/T 19634-2005(XG1-2006) In vitro diagnostic test systems-General technical requirements for blood-glucose monitoring systems for self-testing AMD 1
GB/Z 34603-2017 Gaseous-media fire-extinguishing systems-Engineered extinguishing systems-Flow calculation implementation method and flow verification and testing for approval
GB/T 19634-2005 In vitro diagnostic test systems - General technical requirements for blood-glucose monitoring systems for self-testing
GB/T 36585-2018 Method of dynamic wind uplift test for external thermal insulation composite systems
GB/T 37663.3-2019 Outdoor empirical test requirements for distributed photovoltaic in warm damp climate—Part 3:Grid-connection photovoltaic system
GB/T 19634-2021 In vitro diagnostic test systems—General technical requirements for blood-glucose monitoring systems for self-testing
GB/T 34713-2017 Chemicals-Validation process and principles of alternative methods for in vitro toxicological testing

Shanxi Provincial Standard of the People's Republic of China

DB14/T 2987-2024 Overall structure of Shanxi e-government extranet electronic authentication system

Professional Standard - Aerospace

QJ 2688-1994 Maching Test Procedure and Method for Exterior Measuring Safety System

Professional Standard - Construction Industry

JG/T 429-2014 External Wall Thermal Insulation System - Weathering Test Method

Professional Standard - Aviation

HB 7666-2000 Test Requirements for Performance of Landing Gear System

Professional Standard - Certification and Accreditation

RB/T 183-2017 System diagrams of laboratory proficiency testing

Military Standard of the People's Republic of China-General Armament Department

GJB/Z 9003-1996 Quality System – Quality Assurance Model for Final Inspection and Testing
GJB 9935.1-2021 Relay satellite system field docking test method Part 1: Single-site system

Group Standards of the People's Republic of China

T/ZHCA 009-2019 Method of skin irritation test in vitro for face cream cosmetic products-In vitro skin irritation test with reconstructed skin model

Professional Standard - Post and Telecommunication

YD/T 6419-2025 Testing method for evidence storage and collection system based on big data

Professional Standard - Machinery

JB/T 12992.2-2018 Procedures for measurement and verification of motor-system energy-savings - Part 2: Procedures for measurement and verification of pump-system energy-savings

Gosstandart of Russia

GOST R 8.588-2001 State system for ensuring the uniformity of measurements. Ultraviolet radiometers for ozone monitoring. Methods for verification
GOST R 8.568-1997 State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
GOST R 8.680-2009 State system for ensuring the uniformity of measurements. Volumetric glassware. Verification procedure
GOST R 8.590-2001 State system for ensuring the uniformity of measurements. Instruments measuring the characteristics of ultraviolet radiation in labour safety. Methods for verification
GOST 8.286-1978 State system for ensuring the uniformity of measurements. Electrical timemeters. Methods and means for verification
GOST R 8.708-2010 State system for ensuring the uniformity of measurements. Piezosorbtion hygrometers. Verification procedure
GOST 8.351-1979 State system for ensuring the uniformity of measurements. Slotted lines. Methods and means for verification
GOST R 8.706-2010 State system for ensuring the uniformity of measurements. Embedded and external photometers for laser therapeutic apparatus. Method of verification
GOST 8.216-1988 State system for ensuring the uniformity of measurements. Voltage transformers. Verification methods
GOST 8.627-2013 State system for ensuring the traceability of measurements. In vitro diagnostics medicine test systems for measurement of quantities in biological samples. Part 1. Haematology analyzers. Verification procedure
GOST 8.216-2011 State system for ensuring the uniformity of measurements. Voltage transformers. Verification procedure
GOST 8.046-1985 State system for ensuring the uniformity of measurements. Optical dividing heads. Verification methods
GOST 8.252-1977 State system for ensuring the uniformity of measurements. Tachometric ball flowmeters. Methods and means for verification
GOST 8.366-1979 State system for ensuring the uniformity of measurements. Digital ohmmeters. Methods and means for verification
GOST R 8.705-2010 State system for ensuring the uniformity of measurements. Embedded and external photometers for high-energy laser medical apparatus. Verification procedure
GOST R ISO 17593-2009 Clinical laboratory testing and in vitro medical devices. Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy
GOST R 8.695-2009 State system for ensuring the uniformity of measurements. Metals and alloys. Vickers hardness test. Part 2. Verification and calibration of testing machines
GOST ISO 17593-2011 Clinical laboratory testing and in vitro medical devices. Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy
GOST R 8.568-2017 State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
GOST 8.320-1978 State system for ensuring the uniformity of measurements. Flowmeter electromagnetic industry. Methods and means for verification
GOST R 8.618-2006 State system for ensuring the uniformity of measurements. State verification schedule for means measuring volume and mass flow of gas
GOST R 8.687-2009 State system for ensuring the uniformity of measurements. D. C. measuring voltage dividers. Verification methods
GOST 8.583-2011 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of the refractive index
GOST R 8.631-2007 State system for ensuring the uniformity of measurements. Scanning electron microscopes. Methods for verification
GOST 8.426-1981 State system for ensuring the uniformity of measurements. Shere rebound hardness testing machines. Methods and means of verification
GOST 8.311-1978 State system for ensuring the uniformity of measurements. Cathode-ray oscillographs. Methods and means for verification
GOST R 8.704-2010 State system for ensuring the uniformity of measurements. Working dilatometers. Verification procedure
GOST R 8.683-2009 State system for ensuring the uniformity of measurements. Selective electronic voltmeters. Verification methods
GOST R ISO 16256-2015 Clinical laboratory testing and in vitro diagnostic test systems. Reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases
GOST R ISO 20776-1-2010 Clinical laboratory testing and in vitro diagnostic test systems. Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices. Part 1. Reference method for testing the in vitro activity of antimic
GOST R 8.630-2007 State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Methods for verification
GOST R 8.607-2004 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of the frequency deviation
GOST 8.341-1979 State system for ensuring the uniformity of measurements. Low-pressure pneumatic length gages. Methods and means for verification
GOST R 8.685-2009 State system of ensuring the uniformity of measurements. Diode slideback voltmeters. Verification methods
GOST 8.608-2012 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of chromatic dispersion in optical fiber
GOST R 8.612-2005 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring the surface density of coatings in the range from 0,001 to 1,000 kg/sq m
GOST ISO 15197-2011 In vitro diagnostic test systems. Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
GOST 6.10.7-1990 CMEA unified system of foreign trade documentation. Account
GOST 8.266-1977 State system for ensuring the uniformity of measurements. Goniometers. Methods and means of verification
GOST 8.359-1979 State system for ensuring the uniformity of measurements. Gangs callipers with reading arrangement. Methods and means for verification
GOST 8.229-1981 State system for ensuring the uniformity of measurements. Infrared spectrophotometers. Methods and means of verification
GOST R 8.624-2006 State system for ensuring the uniformity of measurements. Platinum, copper and nickel resistance thermometers. Verification methods
GOST 8.229-2013 State system for ensuring the uniformity of measurements. Infrared spectrophotometers. Verification procedure
GOST R ISO 9003-1996 Quality system. Model for quality assurance in final inspection and test
GOST R 8.792-2012 State system for ensuring the uniformity of measurements. Measuring systems ?Digital level - code surveyor's pole?. Verification procedure
GOST R 8.732-2011 State system for ensuring the uniformity of measurements. State verification schedule for means measuring inductance
GOST 8.236-1977 State system for ensuring the uniformity of measurements. Measuring knives. Methods and means of verification
GOST R 8.597-2003 State system of insuring the uniformity of measurements. Coaxial loads. Method of verification
GOST R 8.671-2009 State system for ensuring the uniformity of measurements. In process gauges of linear parameters. Verification methods
GOST R 8.562-1996 State system for ensuring the uniformity of measurements. State verification schedule for means measuring power of electromagnetic waves within frequency range from 0,03 to 37,50 GHz
GOST 8.340-1978 State system for ensuring the uniformity of measurements. Dead-weight tester type MP-0,4 methods and means of verification
GOST R 8.564-1996 State system for ensuring the uniformity of measurements. State verification schedule for means of electric field intensity measurement within frequency range 0-20 kHz
GOST R 8.562-2007 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the power and voltage of electromagnetic waves
GOST R 8.796-2012 State system for ensuring the uniformity of measurements. Torque measuring devices. Verification procedure
GOST R ISO 15197-2015 In vitro diagnostic test systems. Requirements for blood glucose monitoring systems for self-testing in managing diabetes mellitus
GOST R 8.681-2009 State system for ensuring the uniformity of measurements. State verification schedule for measuring of moisture content of firm and loose materials
GOST 8.459-1982 State system for ensuring the uniformity of measurements. Pitch diference measuring instruments. Methods and means of verification
GOST 8.485-1983 State system for ensuring the uniformity of measurements. Analitical gas laboratory chromatographs. Methods and means of verification
GOST R 8.574-2000 State system for ensuring the uniformity of measurements. State verification schedule for means of electromagnetic field density measurements within frequency range from 0,3 to 178,4 GHz
GOST R 8.606-2004 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of aerosols, suspensions and powdery materials
GOST R 8.914-2016 The state system for ensuring the uniformity of measurements. The gas calorimeters. The verification method
GOST 8.607-2012 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of polarization mode dispersion in optical fiber
GOST R ISO 20776-2-2010 Clinical laboratory testing and in vitro diagnostic test systems. Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices. Part 2. Evaluation of performance of antimicrobial susceptibility tes
GOST 8.261-1977 State system for ensuring the uniformity of measurements. Galvanometers. Methods and means of verification
GOST 8.461-2009 State system for ensuring the uniformity of measurements. Platinum, copper and nickel resistive temperature transducers. Verification methods
GOST 8.461-1982 State system for ensuring the uniformity of measurements. Resistive temperature transducers. Methods and means of calibration
GOST 8.606-2012 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of aerosols, suspensions and powdery materials
GOST 8.292-2013 State system for ensuring the uniformity of measurements. Laboratory conductometers of liquid. Verification procedure
GOST R 8.627-2007 State system for ensuring the uniformity of measurements. Measurements of coefficients of regular and diffuse transmittance of ultraviolet radiation. Methods for measurements
GOST R 8.912-2016 State system for ensuring the uniformity of measurements. Measuring instruments for anesthetic gases. Verification procedure
GOST R 8.629-2007 State system for ensuring the uniformity of measurements. Nanometer range relief measures with trapezoidal profile of elements. Methods for verification
GOST R 8.789-2012 State system for ensuring the uniformity of measurements. The bomb calorimeters. The method of the verification
GOST R 8.593-2002 State system for ensuring the uniformity of measurements. Infrared analysers of grain and forage. Verification procedure
GOST R 8.709-2010 State system for ensuring the uniformity of measurements. The laboratory conductometers of liquid. Methods of verification
GOST 8.234-1977 State system for ensuring the uniformity of measurements. Volumetric glass ware. Methods and means of verification
GOST R 8.690-2009 State system for ensuring the uniformity of measurements. Use of proficiency testing by interlaboratory comparisons for accreditation in testing
GOST R 8.771-2011 State system for ensuring the uniformity of measurements. Analytical gas laboratory chromatographs. The method of verification

US-Unspecified Preparing Activity

DI-EMCS-81846-2011 HEMP TEST PLAN FOR SYSTEM VERIFICATION TEST
DI-EMCS-81847-2011 HEMP TEST REPORT FOR SYSTEM VERIFICATION TEST

Standard Association of Australia （SAA）

AS ISO 20776.1:2017 Clinical laboratory testing and in vitro diagnostic test systems—Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices—Part 1: Reference method for testing the in vitro activity of antimicro

American Water Works Association (AWWA)

AWWA WQTC58923 UV System Cleaning Mechanism Validation
AWWA WQTC71605 New Approaches for Optimizing UV Validation Testing
AWWA WQTC69455 Computational Fluid Dynamics Modeling of UV Reactor Validation Tests
AWWA WQTC58959 Full Scale Bioassay and On-Line Dose Monitoring Validation of a UV Disinfection System
AWWA ACE59898 UV System Validation — from City to Nation to State
AWWA ACE61656 Deployment and Verification Testing of an On-line Security Monitoring System
AWWA ACE61750 Approaches for Validating and Approving Dose Monitoring with UV Disinfection Systems for Drinking Water Applications
AWWA WQTC57119 Environmental Technology Verification of Low- and Medium-Pressure Ultraviolet Systems
AWWA ACE70678 Distribution System Optimization: Beta Testing Experiences
AWWA WQTC62385 Validation and Testing of the Operational Effectiveness of an On-line Security Platform for the Water Distribution System
AWWA ACE58211 On-Site Validation Testing at a Full-Scale UV Disinfection Facility

Japanese Industrial Standards Committee (JISC)

JIS B 7733:1997 Verification of the force measuring system of the compression testing machine
JIS B 7721:1997 Verification of the force measuring system of the tensile testing machine
JIS B 7721:2002 Verification and calibration of the force measuring system of the tension/compression testing machines
JIS B 7721:2018 Tension/compression testing machines -- Calibration and verification of the force-measuring system
JIS B 7721:2009 Tension/compression testing machines -- Verification and calibration of the force-measuring system
JIS Z 9903:1994 Quality systems -- Model for quality assurance in final inspection and test
JIS B 7441:2009 Acceptance and reverification tests for coordinate measuring machines (CMM) with non-contacting probing systems

The Directorate General of Specifications and Metrology (DGSM)

OS GSO OIML R119:2008 Pipe provers for testing measuringSystems for liquids other than water
OS GSO ISO 16256:2016 Clinical laboratory testing and in vitro diagnostic test systems -- Reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases
OS GSO ISO 15197:2014 In vitro diagnostic test systems -- Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
OS GSO ISO 17593:2016 Clinical laboratory testing and in vitro medical devices -- Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy
OS GSO OIML R120:2013 Standard capacity measures for testing measuring systems for liquids other than water
OS GSO ISO 7500-1:2013 Metallic materials -- Verification of static uniaxial testing machines -- Part 1: Tension/compression testing machines -- Verification and calibration of the force-measuring system
OS GSO ISO 20776-1:2016 Clinical laboratory testing and in vitro diagnostic test systems -- Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices -- Part 1: Reference method for testing the in vitro activity of ...

CU-NC

NC 90-13-14-1986 Metrological Assurance. pH Meters. Verification Methods and Means
NC 90-19-18-1987 Metrological AssuranceQuality Gager. Methods and Means of Verification
NC 90-15-36-1988 Standards System for Metrological Assurance. PE-11 Tester. Methods and Means of Verification
NC 90-15-37-1988 Standards System for Metrological Assurance. 1. to 5. Class Measuring Clamps. Methods and Means of Verification
NC 90-08-01-1986 Metrological Assurance, Static Load Machino for Compression Test. Verification Means and Methods
NC 90-19-14-1985 Metrological Assurance. ID 0550 LOGICID Universal igital Tester. Verification ethods and Means
NC-ISO 9003:1995 Quality systems - Model for quality assurance in final inspection and test
NC 90-11-12-1986 Metrological Assurance. Time Delay Measurement. Measurement Methods and Means
NC 90-18-06-1988 Standards System for Metrological Assurance. Gamma Radiation Sources. Exposure Power Measures. Methods and Means of Verification
NC 90-11-13-1987 Metrological Assurance. Installations to Verify Clocks. Methods and Means of Verification
NC 90-13-36-1986 Metrological Assurance Conductometers. Testing Methods

European Committee for Standardization (CEN)

EN 376:1992 In vitro diagnostic systems; requirements for labelling of in vitro diagnostic reagents for self-testing
EN ISO 15197:2003 In vitro diagnostic test systems Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus ISO 15197:2003
EN ISO 15197:2013 In vitro diagnostic test systems - Requirements for bloodglucose monitoring systems for self-testing in managing diabetes mellitus
EN ISO 16256:2012 Clinical laboratory testing and in vitro diagnostic test systems - Reference method for testing the in vitro activity of antimicrobial agents against yeast of fungi involved in infectious diseases (ISO 16256:2012)
EN ISO 16256:2021 Clinical laboratory testing and in vitro diagnostic test systems - Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases (ISO 16256:2021)
EN 10002-2:1991 Metallic materials; tensile testing; part 2: verification of the force measuring system of the tensile testing machines
EN ISO 7500-1:1999 Metallic Materials - Verification of Static Uniaxial Testing Machines - Part 1: Tension/Compression Testing Machines ISO 7500-1:1999
EN ISO 15197:2015 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013)
EN ISO 7500-1:2015 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force- measuring system (ISO 7500-1:2015)
EN 7500-1:2018 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system
EN 375:1992 In vitro diagnostic systems; requirements for labelling of in vitro diagnostic reagents for professional use
prEN 829-1992 In vitro diagnostic systems; transport packages for medical and biological specimens; requirements; tests

Korean Agency for Technology and Standards (KATS)

KS P ISO 17593-2024 Clinical laboratory testing and in vitro medical devices — Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy
KS P ISO 17593-2009(2019) Clinical laboratory testing and in vitro medical devices－Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy
KS P ISO 15197-2017(2022) In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
KS P ISO 15197:2010 In vitro diagnostic test systems－Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
KS B OIMLR 120-2006 Standard capacity measures for testing measuring systems for liquids other than water
KS P ISO 17593:2009 Clinical laboratory testing and in vitro medical devices－Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy
KS P ISO 21474-2-2023 In vitro diagnostic medical devices — Multiplex molecular testing for nucleic acids — Part 2: Validation and verification
KS P ISO TS 17822-1-2018 In vitro diagnostic test systems ─ Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens ─ Part 1: General requirements, terms and defi
KS P ISO TS 17822-1:2018 In vitro diagnostic test systems ─ Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens ─ Part 1: General requirements, terms and defi
KS P ISO 17593-2019 Clinical laboratory testing and in vitro medical devices－Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy
KS P ISO TR 18112-2020 Clinical laboratory testing and in vitro diagnostic test systems－In vitro diagnostic medical devices for professional use－Summary of regulatory requirements for information supplied by the manufacturer
KS A 9003-1998 QUALITY SYSTEMS - MODEL FOR QUALITY ASSURANCE IN FINAL INSPECTION AND TEST
KS P ISO 15197-2017 In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
KS A 9003-1995 Quality systems-Model for quality assurance in final inspection and test
KS P ISO 16256-2022 Clinical laboratory testing and in vitro diagnostic test systems — Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infec
KS A 9003-2003 QUALITY SYSTEMS - MODEL FOR QUALITY ASSURANCE IN FINAL INSPECTION AND TEST
KS P ISO 15197:2017 In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
KS B 50117-2005(2020) Measuring systems for liquids other than water
KS B 50117-2020 Measuring systems for liquids other than water
KS B OIMLR 120-2021 Standard capacity measures for testing measuring systems for liquids other than water
KS P ISO TR 18112-2009(2014) Clinical laboratory testing and in vitro diagnostic test systems－In vitro diagnostic medical devices for professional use－Summary of regulatory requirements for information supplied by the manufacture
KS B ISO 7500-1-2003(2008) Metallic materials － Verification of static uniaxial testing machines － Part 1: Tension/compression testing machines － Verification and calibration of the force-measuring system
KS I ISO 16431-2020 Hydraulic fluid power－Assembled systems－Verification of cleanliness
KS B OIMLR 120-2006(2016) Standard capacity measures for testing measuring systems for liquids other than water
KS B ISO 10360-9-2017 Geometrical product specifications(GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 9: CMMs with multiple probing systems

Ente Nazionale Italiano di Unificazione

UNI EN ISO 16256:2013 Clinical laboratory testing and in vitro diagnostic test systems - Reference method for testing the in vitro activity of antimicrobial agents against yeast of fungi involved in infectious diseases
UNI EN ISO 29701:2010 Nanotechnologies - Endotoxin test on nanomaterial samples for in vitro systems - Limulus amebocyte lysate (LAL) test
UNI EN 10002-2:1993 Metallic materials. Tensile testing. Verification of the force measuring system of the tensile testing machines.
UNI EN ISO 7500-1:2002 Metallic materials - Verification of static uniaxial testing machines - Tension/compression testing machines - Verification and calibration of the force-measuring system
UNI 10242:1993 Small-hydraulic turbines. Filed acceptance tests.
UNI EN 13640:2002 Stability testing of in vitro diagnostic reagents
UNI EN 866-6:2002 Biological systems for testing sterilizers and sterilization processes - Particular systems for use in dry heat sterilizers
UNI 11280:2008 Initial verification and maintenance of gaseous fire-extinguishing systems
UNI 11280:2012 Initial verification and maintenance of gaseous fire-extinguishing systems
UNI 11280:2020 Initial verification and maintenance of gaseous fire-extinguishing systems
UNI EN 13860-3:2004 Non-destructive testing - Eddy current examination - Equipment characteristics and verification - System characteristics and verification
UNI EN 1705:1998 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow.
UNI EN ISO 7500-1:2005 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
UNI EN 375:1993 In vitro diagnostic systems. Requirements for labelling of in vitro diagnostic reagents for professional use.
UNI ISO/TS 13075:2010 Gaseous-media fire-extinguishing systems - Engineered extinguishing systems - Flow calculation implementation method and flow verification and testing for approval
UNI EN ISO 7500-1:2018 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system.
UNI EN ISO 7500-1:2016 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system
UNI ISO 11943:2017 Hydraulic fluid power -- On-line automatic particle-counting systems for liquids -- Methods of calibration and validation

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0470-2-1993*DIN IEC 61032:1993 Test probes to verify protection by enclosures
VDE 0024-2013 Regulations for the Testing and Certification System of the VDE Association for Electrical, Electronic & Information Technologies

GCC Standardization Organization

GSO ISO 16256:2016 Clinical laboratory testing and in vitro diagnostic test systems -- Reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases
GSO IEC 61304:2015 Nuclear instrumentation - Liquid-scintillation counting systems - Performance verification
GSO OIML D36:2023 Pipe provers for verification and calibration of measuring systems for liquids
GSO ISO/TS 13075:2013 Gaseous-media fire-extinguishing systems -- Engineered extinguishing systems -- Flow calculation implementation method and flow verification and testing for approval
GSO OIML R119:2008 Pipe provers for testing measuringSystems for liquids other than water
GSO ISO 17593:2016 Clinical laboratory testing and in vitro medical devices -- Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy
BH GSO OIML R119:2024 Pipe provers for testing measuringSystems for liquids other than water
GSO OIML R120:2013 Standard capacity measures for testing measuring systems for liquids other than water
GSO ISO 7500-1:2013 Metallic materials -- Verification of static uniaxial testing machines -- Part 1: Tension/compression testing machines -- Verification and calibration of the force-measuring system
OS GSO ISO 11608-6:2024 Needle-based injection systems for medical use — Requirements and test methods — Part 6: On-body delivery systems
OS GSO ISO 7500-1:2024 Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system
GSO ISO 20776-1:2016 Clinical laboratory testing and in vitro diagnostic test systems -- Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices -- Part 1: Reference method for testing the in vitro activity of ...
BH GSO ISO 7500-1:2024 Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system
GSO ISO 7278-2:2014 Liquid hydrocarbons -- Dynamic measurement -- Proving systems for volumetric meters -- Part 2: Pipe provers

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 16256:2017 Clinical laboratory testing and in vitro diagnostic test systems -- Reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases
BH GSO OIML D36:2023 Pipe provers for verification and calibration of measuring systems for liquids
BH GSO ISO 15197:2015 In vitro diagnostic test systems -- Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
BH GSO OIML R120:2015 Standard capacity measures for testing measuring systems for liquids other than water
BH GSO ISO 20776-1:2017 Clinical laboratory testing and in vitro diagnostic test systems -- Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices -- Part 1: Reference method for testing the in vitro activity of ...

International Organization for Standardization (ISO)

ISO 17593:2022 Clinical laboratory testing and in vitro medical devices — Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy
ISO 21474-2:2022 In vitro diagnostic medical devices — Multiplex molecular testing for nucleic acids — Part 2: Validation and verification
ISO 15197:2013 In vitro diagnostic test systems.Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
ISO 15197:2003 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
ISO 16256:2021 Clinical laboratory testing and in vitro diagnostic test systems - Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases
ISO 16256:2012 Clinical laboratory testing and in vitro diagnostic test systems - Reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases
ISO 17593:2007 Clinical laboratory testing and in vitro medical devices - Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy
ISO 7500-1:1999 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
ISO 7500-1:2018 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system

Indonesia Standards

SNI ISO 15197:2009 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus

British Standards Institution (BSI)

BS ISO 21474-2:2022 In vitro diagnostic medical devices. Multiplex molecular testing for nucleic acids - Validation and verification
BS ISO 17593:2022 Clinical laboratory testing and in vitro medical devices. Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy
BS EN 16303:2020 Road restraint systems. Validation and verification process for the use of virtual testing in crash testing against vehicle restraint system
BS 3042:1992 Test probes to verify protection by enclosures
BS EN ISO 15197:2003 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
BS EN ISO 15197:2013 In vitro diagnostic test systems. Requirements for blood-glucosemonitoring systems for self-testing in managing diabetes mellitus
BS EN 10002-2:1992 Tensile testing of metallic materials-Verification of the force measuring system of the tensile testing machine
BS ISO 17593:2007 Clinical laboratory testing and in vitro medical devices. Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy
21/30402425 DC BS ISO 17593. Clinical laboratory testing and in vitro medical devices. Requirements for in vitro monitoring systems for selftesting of oral anticoagulant therapy
18/30371552 DC BS EN 16303. Road restraint systems. Validation and verification process for the use of virtual testing in crash testing against vehicle restraint system
BS EN ISO 16256:2012 Clinical laboratory testing and in vitro diagnostic test systems. Reference method for testing the in vitro activity of antimicrobial agents against yeast of fungi involved in infectious diseases
BS EN ISO 7500-1:1999 Metallic materials. Verification of static uniaxial testing machines-Tension/compression testing machines. Verification and calibration of the force-measuring system
BS EN ISO 16256:2021 Clinical laboratory testing and in vitro diagnostic test systems. Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases
DD ISO/TS 13075:2009 Gaseous-media fire-extinguishing systems. Engineered extinguishing systems. Flow calculation implementation method and flow verification and testing for approval
BS EN ISO 7500-1:2018 Metallic materials. Calibration and verification of static uniaxial testing machines. Tension/compression testing machines. Calibration and verification of the force-measuring system
BS EN ISO 9003:1994 Quality systems. Model for quality assurance in final inspection and test
BS EN ISO 15197:2015 In vitro diagnostic test systems. Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
21/30415510 DC BS ISO 21474-2. In vitro diagnostic medical devices. Multiplex molecular testing for nucleic acids. Part 2. Validation and verification
BS EN 10002-2:1992(1998) Metallic materials; tensile testing; part 2: verification of the force measuring system of the tensile testing machines
BS PD ISO/TS 16431:2002 Hydraulic fluid power. Assembled systems. Verification of cleanliness
BS EN ISO 23675:2025 Cosmetics. Sun protection test methods. In vitro determination of sun protection factor (SPF)
BS EN ISO 9003:1994(1998) Quality systems — Model for quality assurance in final inspection and test — Formerly

Spanish Association for Standardization (UNE)

UNE-EN 16303:2021 Road restraint systems - Validation and verification process for the use of virtual testing in crash testing against vehicle restraint system
UNE-EN ISO 16256:2013 Clinical laboratory testing and in vitro diagnostic test systems - Reference method for testing the in vitro activity of antimicrobial agents against yeast of fungi involved in infectious diseases (ISO 16256:2012)
AENOR UNE-EN ISO 16256:2013 Clinical laboratory testing and in vitro diagnostic test systems - Reference method for testing the in vitro activity of antimicrobial agents against yeast of fungi involved in infectious diseases (ISO 16256:2012)
UNE-EN ISO 15197:2015 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013)
AENOR UNE-EN ISO 10485:2006 Proof load test with cone for nuts (ISO 10485:1991)
UNE-EN ISO 16256:2021 Clinical laboratory testing and in vitro diagnostic test systems - Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases (ISO 16256:2021) (Endorsed by Asociac...
UNE-EN ISO 15197:2013 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013)
UNE-EN ISO 20776-1:2007 Clinical laboratory testing and in vitro diagnostic test systems - Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices - Part 1: Reference method for testing the in vitro activity of antim
UNE-EN ISO 7500-1:2018 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2018)
AENOR UNE-EN ISO 15197:2015 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013)
UNE-EN ISO 15197:2004 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2003)
UNE-EN ISO 7500-1:2006 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO 7500-1:2004)
AENOR UNE-EN ISO 20776-1:2007 Clinical laboratory testing and in vitro diagnostic test systems - Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices - Part 1: Reference method for testing the in vitro activity of an...

German Institute for Standardization

DIN EN 16303:2020-10 Road restraint systems - Validation and verification process for the use of virtual testing in crash testing against vehicle restraint system; German version EN 16303:2020
DIN EN 16303:2020 Road restraint systems - Validation and verification process for the use of virtual testing in crash testing against vehicle restraint system
DIN 6855-101 E:2024-08 Draft Document - Acceptance testing of nuclear medical measuring systems - Part 101: Radiation counting systems for measurements in vivo and in vitro
DIN EN 16303 E:2018 Draft Document - Road restraint systems - Validation and verification process for the use of virtual testing in crash testing against vehicle restraint system; German and English version prEN 16303:2018
DIN EN 16303 E:2018-04 Road restraint systems - Validation and verification process for the use of virtual testing in crash testing against vehicle restraint system
DIN EN ISO 15197 E:2011-02 In vitro diagnostic test systems Requirements for self-testing blood glucose monitoring systems in diabetes management (draft)
DIN EN ISO 15197:2004 Test systems for in vitro diagnostics – requirements for blood glucose measuring systems for self-use in diabetes mellitus
DIN EN ISO 7500-1 Supplement 2:1999 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of spring testing m...
DIN EN ISO 9003:1994 Quality systems – Model for quality assurance in final inspection and test
DIN EN ISO 15197:2015-12 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013); German version EN ISO 15197:2015 / Note: DIN EN ISO 15197 (2013-11) remains valid alongside this stand...
DIN EN ISO 7500-1 Supplement 2:1999-11 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system
DIN EN ISO 7500-1 Supplement 3:1999 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of fatigue testing ...
DIN EN ISO 7500-1 Beiblatt 4:2013-03 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system; Supplement 4: Information for taking the uncertainty into account regardi...
DIN 6855-1:2021-11 Constancy testing of nuclear medical measuring systems - Part 1: Radiation counting systems for measurements in vivo and in vitro
DIN EN ISO 7500-1 Supplement 3:1999-11 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system
DIN EN ISO 7500-1 Supplement 1:1999-11 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system
DIN EN ISO 16256:2022-02 Clinical laboratory testing and in vitro diagnostic test systems - Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases (ISO 16256:2021); German version EN I...
DIN EN ISO 7500-1 Supplement 3 E:2023-03 Draft Document - Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system - Supplement 3: General information for r...
DIN EN ISO 7500-1:2004 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO 7500-1:2004); German version EN ISO 7500-1:2004
DIN EN ISO 20776-1:2007-02 Clinical laboratory testing and in vitro diagnostic test systems - Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices - Part 1: Reference method for testing the in vitro activity of an...
DIN EN ISO 7500-1 Supplement 1 E:2021 Draft Document - Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system - Supplement 1: General for requirements, verification an...
DIN EN ISO 15197:2013-11 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013)
DIN EN ISO 7500-1 Supplement 1 E:2021-02 Draft Document - Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system - Supplement 1: General for requirements, verification an...
DIN EN ISO 7500-1:2018-06 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2018); German version EN ISO 7500-1:2018
DIN EN ISO 16256:2013 Clinical laboratory testing and in vitro diagnostic test systems - Reference method for testing the in vitro activity of antimicrobial agents against yeast of fungi involved in infectious diseases (ISO 16256:2012); German version EN ISO 16256:2012
DIN EN ISO 7500-1 Beiblatt 2:2022-06 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system - Supplement 2: General for requirements, verification and...
DIN EN ISO 7500-1 Supplement 2 E:2021-02 Draft Document - Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system - Supplement 2: General for requirements, verification an...
DIN EN ISO 7500-1 Supplement 2 E:2021 Draft Document - Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system - Supplement 2: General for requirements, verification an...
DIN EN ISO 7500-1 Supplement 1:2021-02 Draft Document - Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system - Supplement 1: General for requirements, verification an...
DIN EN ISO 7500-1:2004-11 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO 7500-1:2004)

Danish Standards Foundation

DANSK DS/EN 16303:2020 Road restraint systems – Validation and verification process for the use of virtual testing in crash testing against vehicle restraint system
DANSK DS/ISO 17593:2007 Clinical laboratory testing and in vitro medical devices – Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy
DANSK DS/EN ISO 16256:2013 Clinical laboratory testing and in vitro diagnostic test systems – Reference method for testing the in vitro activity of antimicrobial agents against yeast of fungi involved in infectious diseases
DS/EN ISO 15197:2013 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
DANSK DS/EN ISO 15197:2015 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
DS/EN ISO 7500-1:2004 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
DS/EN ISO 7500-1/AC:2009 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
DANSK DS/ISO/TR 18112:2006 Clinical laboratory testing and in vitro diagnostic test systems - In vitro diagnostic medical devices for professional use - Summary of regulatory requirements for information supplied by the manufacturer
DS/EN 375:1993 In vitro diagnostic systems. Requirements for labelling of in vitro diagnostic reagents for professional use
DS/EN 376:1993 In vitro diagnostic systems - Requirements for labelling of in vitro diagnostic reagents for self-testing

CEN - European Committee for Standardization

PREN 16303-2018 Road restraint systems - Validation and verification process for the use of virtual testing in crash testing against vehicle restraint system

Standards Norway

NS-EN 16303:2020 Road restraint systems - Validation and verification process for the use of virtual testing in crash testing against vehicle restraint system
NS-EN ISO 16256:2012 Clinical laboratory testing and in vitro diagnostic test systems — Reference method for testing the in vitro activity of antimicrobial agents against yeast of fungi involved in infectious diseases (ISO 16256:2012)
NS-ISO 9003:1987 Quality systems — Model for quality assurance in final inspection and test
NS-EN 10002-2:1991 Metallic materials — Tensile testing — Part 2: Verification of the force measuring system of the tensile testing machines
NS-EN 375:1992 In vitro diagnostic systems — Requirements for labelling of in vitro diagnostic reagents for professional use
NS-EN 376:1992 In vitro diagnostic systems — Requirements for labelling of in vitro diagnostic reagents for self-testing
NS-EN ISO 15197:2013 In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013)
NS-EN ISO 15197:2015 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013)
NS-EN ISO 20776-1:2006 Clinical laboratory testing and in vitro diagnostic test systems — Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices — Part 1: Reference method for testing the in vitro activity of an...
NS-EN ISO 7500-1:2004 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO 7500-1:2004)
NS-EN ISO 15197:2003 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2003)

PL-PKN

PN-EN 16303-2021-02 E Road restraint systems -- Validation and verification process for the use of virtual testing in crash testing against vehicle restraint system

Association Francaise de Normalisation

NF S92-026:2004 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus.
NF S92-026:2013 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
NF S92-012*NF EN ISO 16256:2013 Clinical laboratory testing and in vitro diagnostic test systems - Reference method for testing the in vitro activity of antimicrobial agents against yeast of fungi involved in infectious diseases
NF S92-011:1992 IN VITRO DIAGNOSTIC SYSTEMS. REQUIREMENTS FOR LABELLING OF IN VITRO DIAGNOSTIC REAGENTS FOR SELF-TESTING. (EUROPEAN STANDARD EN 376).
NF E48-671:1989 Fluid system. Filter elements. Verification of fabrication integrity and determination of first bubble point.
NF ISO 21474-2:2022 In vitro diagnostic medical devices - Multiplex molecular tests for nucleic acids - Part 2: validation and verification
NF S92-026*NF EN ISO 15197:2015 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
NF EN ISO 20776-2:2022 Laboratory testing and in vitro diagnostic systems - In vitro susceptibility of infectious agents and performance evaluation of antibiogram devices - Part 2: performance evaluation of antibiogram devices...
NF A03-002:1991 METALLIC MATERIALS. TENSILE TESTING. PART 2 : VERIFICATION OF THE FORCE MEASURING SYSTEM OF THE TENSILE TESTING MACHINES. (EUROPEAN STANDARD EN 10002-2).
NF S92-012*NF EN ISO 16256:2021 Clinical laboratory testing and in vitro diagnostic test systems - Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases
NF EN ISO 23675:2025 Cosmetics - Sun protection test methods - In vitro determination of sun protection factor (SPF)
NF A03-002-1:2005 Metallic materials - Verification of static uniaxial testing machines - Part 1: tension/compression testing machines - Verification and calibration of the force measuring system
NF S92-013:1996 In vitro diagnostic systems. Transport packages for medical and biological specimens. Requirements, tests.

Society of Automotive Engineers (SAE)

SAE J3079-1-2021 Validation of Compressibility Test Systems for Friction Materials
SAE J3079/1-2021 Validation of Compressibility Test Systems for Friction Materials
SAE J2869-2010 Mechanical Systems Physics-of-Failure Analysis Experimental Validation
SAE J3079/1_202101 Validation of Compressibility Test Systems for Friction Materials
SAE J2869-2016 Mechanical Systems Physics-of-Failure Analysis Experimental Validation
SAE J1537_201304 Validation Testing of Electric Fuel Pumps for Gasoline Fuel Injection Systems
SAE J1537_199006 Validation Testing of Electric Fuel Pumps for Gasoline Fuel Injection Systems
SAE USCAR7-2 Deembrittlement Verification Test
SAE USCAR7 Deembrittlement Verification Test

BELST

STB 941.3-93 System of accreditation of verification ant testing laboratory of Belarus. General requirements for estimation of technical competence verification and testing laboratory
STB 941.5-96 System of accreditation and testing laboratories of Belarus. Experts on attestation of calibration and testing laboratories
STB 8058-2017 System for ensuring uniformity of measurements of the Republic of Belarus. Ultraviolet-visible-nearinfrared spectrophotometers. Methods of verification

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE NO-94-28-1994 Laboratory HVAC Systems: Design@ Validation@ Commissioning
ASHRAE 4464-2001 Experimental Validation of Tunnel Ventilation System Under Emergency Operation

Bureau of Indian Standards

IS/ISO 9003-1994 Quality Systems - Model for Quality Assurance in Final Inspection Test
IS/ISO 15197-2013 In vitro Diagnostic Test Systems —— Requirements for Blood-Glucose Monitoring System for Self-Testing in Managing Diabetes Mellitus
IS 18298-2023 Clinical Laboratory Testing And In Vitro Medical Devices - Requirements For In Vitro Monitoring Systems For Self-Testing Of Oral Anticoagulant Therapy
IS/ISO 17593-2007 Clinical laboratory testing and in vitro medical devices - Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy
IS 1828-1-2022 METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCE-MEASURING SYSTEM
IS 10201-6-1988 Quality Systems: Part 6 Model for quality assurance in final inspection and test

Association of German Mechanical Engineers

VDI 2631-1968 TESTING INSIDE AND OUTSIDE CONE; TEST METHOD AND TEST MEANS
VDI/VDE 3517 BLATT 3-2003 Validation in process control technology — Retrospective validation of old systems
VDI/VDE 3517 Blatt 3-1999 Validierung in der Prozessleittechnik - Retrospektive Validierung von Altanlagen
VDI/VDE 3517 BLATT 5-2003 Validation in process control technology — Validation support when using control systems
VDI/VDE 3517 Blatt 5-1999 Validierung in der Prozessleittechnik - Validierungsunterstuetzung bei Einsatz von Leitsystemen
VDI/VDE 2629 BLATT 1-2008 Accuracy of contour measuring devices — parameters and their testing — acceptance testing and confirmation testing for contour measuring devices using the tactile stylus method

American Society for Testing and Materials (ASTM)

ASTM E2309/E2309M-20 Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines
ASTM E2847-14 Standard Test Method for Calibration and Accuracy Verification of Wideband Infrared Thermometers
ASTM E2847-13e1 Standard Test Method for ? ?Calibration and Accuracy Verification of Wideband Infrared Thermometers

Canadian Standards Association (CSA)

CAN/CSA-ISO 15197:2005(R2010) In Vitro Diagnostic Test Systems - Requirements for Blood-Glucose Monitoring Systems for Self-Testing in Managing Diabetes Mellitus
CAN/CSA-ISO 9003-1994(R2001) Quality systems - Model for quality assurance in final inspection and test
CSA ISO 15197-05-CAN/CSA:2005 In vitro diagnostic testing systems - Requirements for blood glucose self-monitoring systems for the management of diabetes mellitus
CSA ISO 15197-2015(R2020) In vitro diagnostic test systems - Performance requirements for blood glucose monitoring systems for diabetes self-management
CAN/CSA-ISO 15197:2015 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (Second Edition)

IN-BIS

IS 12421-1988 Performance verification of liquid scintillation counting systems

Institute of Electrical and Electronics Engineers (IEEE)

IEEE N42.15-1990 Performance Verification of Liquid-Scintillation Counting Systems
IEEE N42.15-1980 PERFORMANCE VERIFICATION OF LIQUID-SCINTILLATION COUNTING SYSTEMS (R 1985)

Swedish Institute for Standards

SS-EN 10002-2:1992 Metallic materials - Tensile testing - Part 2: Verification of the force measuring system of the tensile testing machines
SS-ISO 17593:2022 Clinical laboratory testing and in vitro medical devices — Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy (ISO 17593:2022, IDT)
SS-EN ISO 15197:2013 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013)
SS-EN ISO 15197:2016 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013)
SS-EN ISO 7500-1:2018 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2018)

American Petroleum Institute (API)

API MPMS 4.8-1995 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 8 - Operation of Proving Systems

Compressed Gas Association (U.S.)

CGA M-4-2019 Medical Gas Cylinder Filling System Validation Guide

International Electrotechnical Commission (IEC)

IEC TR 61032:1990/COR1:1990 Corrigendum 1 - Test probes to verify protection by enclosures
IEC 61304:1994 Nuclear instrumentation - Liquid-scintillation counting systems - Performance verification

SE-SIS

SIS SS-EN 10 002-2-1992 Meta I lic materials — Tensile testing — Part 2: Verification of the force measuring system of the tensile testing machines

PH-BPS

PNS ISO 29701:2021 Nanotechnologies - Endotoxin test on nanomaterial samples for in vitro systems - Limulus amebocyte lysate (LAL) test

GM Global

GMW 3049-2019 Passenger vehicle defrost system maximum performance verification test procedure

AT-ON

ONORM EN 829-1996 In vitro diagnostic systems-Transport packages for medical and biological specimens-Requirements,test
ONORM EN 376-1993 In vitro diagnostic Systems - Requirements for labelling of in vitro diagnostic reagents for serf-testing
ONORM EN 29003-1990 Quality Systems; modelfor quality assurance in final inspection and test

National Electrical Manufacturers Association（NEMA)

NEMA LSD 63-2012 Measurement Methods and Performance Variation for Verification Testing of General Purpose Lamps and Systems

ABS - American Bureau of Shipping

ABS 189-2014 GUIDE FOR SYSTEMS VERIFICATION
ABS 189-2012 Guide For Systems Verification (Including Hardware-In-The-Loop And Software-In-The-Loop Testing)

Standards New Zealand

NZS 5603:1987 Quality systems - Model for quality assurance in final inspection and test

US-CFR-file

CFR 40-1065.550-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.550:Gas analyzer range verification and drift verification.

YU-JUS

JUS A.K1.014-1987 Quality systems. Model for quality assurance in final inspection and test

Magyar Szabványügyi Testület

MNOSZ 8071-1952 Certification testing, measuring liquids

US-FCR

FCR FED FCGS 02711-1979 OUTSIDE GAS SYSTEM

Lithuanian Standards Office

LST EN ISO 7500-1:2004 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO 7500-1:2004)

European Telecommunications Standards Institute (ETSI)

ETSI TR 103 099 V1.5.1 (2022-03)-2022 Intelligent Transport Systems (ITS); Architecture of conformance validation framework
ETSI TR 103 099 V1.3.1 (2015-07)-2015 Intelligent Transport Systems (ITS); Architecture of conformance validation framework

RO-ASRO

STAS SR EN 10002-2-1995 Metallic materials. Tensile testing. Part 2 : Verification of the force measuring system of the tensile testing machines

Others: In Vitro Test System Validation,in vitro testing,Clinical Laboratory Testing and In Vitro Diagnostic Test Systems,in vitro test meter,In vitro diagnostic tests and servings