three-point bending rate

three-point bending rate, Total:129 items.

The international standard classification for "three-point bending rate" includes: Raw materials and raw glass , Other rubber and plastics products , Refractories , Advanced ceramics , Plastics in general , Paper and board .

The Chinese standard classification for "three-point bending rate" includes: Ceramic and glass in general , Other rubber products , Fireproof material in general , Special ceramics , Papermaking in general .

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33099-2016 Test methods of stiff’ness for dipped reinforcing material一Three-point bending
GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass--Three-point bending method

未注明发布机构

ASTM RR-E37-1025 2000 E2092-Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
DIN EN 1966:2003 Structural adhesives — Characterization of a surface by measuring adhesion by means of the three point bending method
DIN EN 1966 E:2008-07 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
DIN 51902 E:2020-05 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
ASTM RR-E37-1032 2003 E2092-Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ANSI/ASAE S459-1992(2017) Shear and Three-Point Bending Test ofAnimal Bone
ASTM RR-E37-2002 2022 E2769-Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）
GB/T 39826-2021 Fine ceramics—Determining flexural bond strength—Four-point bending method

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 23144-2023 Paper and board—Determination of bending stiffness—General principles for two-point|| three-point and four-point methods
GB/T 11546.2-2022 Plastics—Determination of creep behaviour—Part 2:Flexural creep by three-point loading
GB/T 22906.6-2008 Testing of cores—Part 6:Determination of bending strength by three-point method

Professional Standard - Medicine

YY/T 0858-2011 Standard guide for three-point bending of balloon expandable vascular stents and stent systems

工业和信息化部

QB/T 5559-2020 Bending resistance tester with constant rate of deflection

Group Standards of the People's Republic of China

T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural

British Standards Institution (BSI)

BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS ISO 11093-7:2011 Paper and board. Testing of cores. Determination of flexural modulus by the three-point method
BS ISO 5628:2012 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
18/30356322 DC BS ISO 21914. Test methods for fibre-reinforced cementitious composites. Bending moment-curvature curve by four-point bending test
BS EN ISO 899-2:2003+A1:2015 Plastics. Determination of creep behaviour. Flexural creep by three-point loading
BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
BS ISO 5628:2019 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
DD ENV 1966-1996 Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method
BS EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)
BS 2782-10 Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method
BS EN 2831:1993 Hydrogen embrittlement of steels - Test by slow bending

FI-SFS

SFS-ISO 6602 E:1986 This standard is approved in English

German Institute for Standardization

DIN EN 2746:1998-10 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN 53293:1982-02 Testing of sandwiches; Bending test
DIN EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN ISO 11093-6:2005-09 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN EN ISO 899-2:2015-06 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003 + Amd.1:2015); German version EN ISO 899-2:2003 + A1:2015 / Note: To be replaced by DIN EN ISO 899-2 (2023-03) (in preparation).
DIN EN ISO 899-2:2003 Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003); German version EN ISO 899-2:2003

SCC

NS-EN 2746:1998 Aerospace series — Glass fibre reinforced plastics — Flexural test — Three point bend method
DANSK DS/EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
BS ISO 11093-6:1996 Paper and board. Testing of cores-Determination of bending strength by the three-point method
BS ISO 11093-7:1997 Paper and board. Testing of cores-Determination of flexural modulus by the three-point method
BS EN ISO 899-2:1997 Plastics. Determination of creep behaviour-Flexural creep by three-point loading
BS DD ENV 1966:1996 Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method
AENOR UNE 57163-7:2004 Paper and cardboard cores. Part 7: Determination of flexural strength using the three-point method.
AENOR UNE-ISO 11093-6:2017 Paper and paperboard. Mandrel test. Part 6: Determination of flexural strength by the three-point method.
10/30205404 DC BS ISO 5628. Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
UNE-EN 1966:2003 Structural adhesives - Characterisation of a surface by measuring adhesion by means of the three point bending method.
NS-EN 1966:2009 Structural adhesives — Characterization of a surface by measuring adhesion by means of the three point bending method
DANSK DS/EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
NS-EN 1966:2002 Structural adhesives — Characterisation of a surface by measuring adhesion by means of the three point bending method

American Society for Testing and Materials (ASTM)

ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM E2769-22 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM D5934-96 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2769-13 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-18 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-16 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-15 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E2769-11 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading

AENOR

UNE-EN 2746:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. FLEXURAL TEST. THREE POINT BEND METHOD.
UNE-EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method

American National Standards Institute （ANSI)

ANSI/ASAE S459-1993 Shear and Three-Point Bending Test of Animal Bones
ANSI/TAPPI T836 om-2013 Bending stiffness, four point method
ANSI/ASTM D5023:2001 Test Method for Measuring the Dynamic Mechanical Properties of Plastics Using Three Point Bending (08.03)
ANSI/ASTM D5934:1997 Test Method for Determination of the Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three Point Bending

RU-GOST R

GOST 34368.2-2017 Plastics. Method of determination of flexural creep by three-point loading

Association Francaise de Normalisation

NF T51-120-3:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 3 : essai en flexion trois points sur éprouvettes non encastrées.
NF Q03-127:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods.
NF T30-010:1992 Paints and varnishes. Evaluation of adhesion or cohesion. Three point bending method.
NF EN ISO 899-2:2003 Plastiques - Détermination du comportement au fluage - Partie 2 : fluage en flexion par mise en charge en trois points
NF EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion using the three-point bending method

Lithuanian Standards Office

LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
LST EN 1966-2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method

HU-MSZT

MNOSZ 1247-1950 high speed bending
MSZ 1265-1960 high speed bending
MSZ 1273-1960 high speed bending
MSZ 1260-1960 high speed bending

European Committee for Standardization (CEN)

EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
EN 63:1977 Glass Reinforced Plastics: Determination of Flexural Properties; Three Point Method
EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method
EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
EN ISO 899-2:1996 Plastics - Determination of Creep Behaviour - Part 2: Flexural Creep by Three-Point Loading ISO 899-2: 1993

Danish Standards Foundation

DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DS/EN 1966:2009 Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method

GSO

BH GSO ISO 14679:2016 Adhesives -- Measurement of adhesion characteristics by a three-point bending method
GSO ISO 14679:2015 Adhesives -- Measurement of adhesion characteristics by a three-point bending method
GSO ISO 21914:2022 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
BH GSO ISO 21914:2023 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
OS GSO ISO 11093-6:2008 Paper and board -- Testing of cores -- Part 6: Determination of bending strength by the three-point method
OS GSO ISO 11093-7:2014 Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method
BH GSO ISO 11093-7:2015 Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method
OS GSO ISO 899-2:2016 Plastics -- Determination of creep behaviour -- Part 2: Flexural creep by three-point loading
GSO ISO 11093-6:2008 Paper and board -- Testing of cores -- Part 6: Determination of bending strength by the three-point method
GSO ISO 899-2:2016 Plastics -- Determination of creep behaviour -- Part 2: Flexural creep by three-point loading

Korean Agency for Technology and Standards (KATS)

KS M ISO 14679-2022 Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679-2007(2022) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679-2007(2017) Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 14679:2007 Adhesives－Measurement of adhesion characteristics by a three－point bending method
KS M ISO 5628-2023 Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
KS M ISO 899-2-2016(2021) Plastics－Determination of creep behavior－Part 2：Flexural creep by three-point loading
KS M ISO 11093-6:2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 899-2-2021 Plastics－Determination of creep behavior－Part 2：Flexural creep by three-point loading
KS M ISO 11093-7:2014 Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
KS M ISO 11093-6:2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method

International Organization for Standardization (ISO)

ISO 6602:1985 Plastics; Determination of flexural creep by three-point loading
ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
ISO 14679:1997 Adhesives - Measurement of adhesion characteristics by a three-point bending method
ISO 5628:2019 Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
ISO 5628:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods

ESDU - Engineering Sciences Data Unit

ESDU 71004 B-1980 Flange efficiency factors for curved beams under bending in the plane of curvature.

AT-ON

ONORM EN 63-1979 Glass reinforced plastics. Determination of flexural properties. Three point method.

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 2746-1990 Aerospace Series Glass Fibre Reinforced Plastics Determination of Flexural Properties Three Point Bend Method (Issue P 1)

KR-KS

KS M ISO 899-2-2016 Plastics－Determination of creep behavior－Part 2：Flexural creep by three-point loading
KS M ISO 11093-6-2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-6-2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method

Malaysia Standards

MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending

Japanese Industrial Standards Committee (JISC)

JIS K 6272:2003 Rubber -- Tensile, flexural and compression test equipment (constant rate of traverse) -- Specification

Standard Association of Australia （SAA）

AS/NZS 1301.453s:1998 Methods of test for pulp and paper - Bending resistance of paper and board - Constant rate of deflection

CEN - European Committee for Standardization

DD ENV 1966-1995 Structural Adhesives - Characterization of a Surface by a Measuring Adhesion by Means of the Three Point Bending Method