How to calculate the detection limit of an analytical method

How to calculate the detection limit of an analytical method, Total:74 items.

The international standard classification for "How to calculate the detection limit of an analytical method" includes: Non-destructive testing , Optical measuring instruments .

The Chinese standard classification for "How to calculate the detection limit of an analytical method" includes: Basic standards and general methods , Basic standards and general methods , Electron optics and other physical optics instrument .

未注明发布机构

ASTM RR-D02-1636 2008 D7215-Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels
DIN 51733 E:2015-07 Testing of solid mineral fuels - Ultimate analysis and calculation of oxygen content
ASTM RR-E54-1000 2014 E2677-Test Method for Estimating Limits of Detection in Trace Detectors for Explosives and Drugs of Interest

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 36232-2018 Non-destructive testing of welds—Test method on electron-beam welded joints by industrial computed tomography(CT)
GB/T 29071-2012 Non-destructive testing—Test method for industrial computed tomography(CT)examination of initiating explosive device
GB/T 38535-2020 Test method on fiber reinforced resin matrix composites by industrial computed tomography (CT)
GB/T 29069-2012 Non-destructive testing—Test method for measurement of industrial computed tomography (CT) system performance
GB/T 26642-2011 Non-destructive testing - Test method for computed radiography of metallic materials
GB/T 15075-1994 Method for testing EPMA instrument
GB/T 27415-2013 Estimate of detection and quantitation limit for analytical method
GB/T 29067-2012 Non-destructive testing—Test method for measuring industrial computed tomography(CT)image

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35390-2017 Non-destructive testing—Test method of ammunition density by industrial computed tomography(CT)
GB/T 35839-2018 Non-destructive testing—Test method for measuring industrial computed tomography(CT) density
GB/T 35391-2017 Non-destructive testing—Spatial resolution phantom for industrial computed tomography(CT)testing
GB/T 35386-2017 Non-destructive testing—Density resolution phantom for industrial computed tomography(CT)testing

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 12604.12-2021 Non-destructive testing—Terminology—Part 12:Radiation methods for industrial computed tomography
GB/T 37166-2018 Non-destructive testing—Test method of composite materials for industrial computed tomography(CT)
GB/T 41123.3-2021 Non-destructive testing—Radiation methods for industrial computed tomography—Part 3:Qualification
GB/T 37158-2018 Non-destructive testing—Test method for measuring the maximum detectable steel thickness by industrial computed tomography (CT)

交通运输部

JT/T 1341-2020 Test and calculation method for energy consumption of cutter suction dredger

Group Standards of the People's Republic of China

T/CSTM 00994-2024 Calculation standards and analysis methods for carbon emissions of industrial buildings

German Institute for Standardization

DIN 51733:2016-04 Testing of solid mineral fuels - Ultimate analysis and calculation of oxygen content
DIN 32645:2008-11 Chemical analysis - Decision limit, detection limit and determination limit under repeatability conditions - Terms, methods, evaluation
DIN 32645:1994 Chemical analysis; decision limit; detection limit and determination limit; estimation in case of repeatability; terms, methods, evaluation

Danish Standards Foundation

DS/ISO 12828-1:2012 Validation method for fire gas analysis - Part 1: Limits of detection and quantification
DS 256:1977 Water analysis. Components of the carbonate system. (Calculation method)

AT-ON

ONORM M 6245-1997 Water analysis - Summary of methods - Limits of detection, fields of application, Statistical data

American Gear Manufacturers Association

AGMA 94FTM2-1994 Analytical Method for the Calculation of the Efficiency of Planetary Gears

API - American Petroleum Institute

API PUBL 4721-2002 Analytical Detection and Qualification Limits: Survey of State and Federal Approaches

European Committee for Standardization (CEN)

EN ISO 11290-2:2017 Microbiology of the food chain - Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp. - Part 2: Enumeration method

British Standards Institution (BSI)

BS ISO 12828-1:2011 Validation method for fire gas analysis. Limits of detection and quantification
BS DD CEN/TS 15296:2006 Solid biofuels - Calculation of analyses to different bases
BS 3900-J8:1993 Methods of test for paints - Testing of coating powders - Calculation of lower explosion limit of coating powders

International Organization for Standardization (ISO)

ISO 13319:2000 Determination of particle size distributions - Electrical sensing zone method

RU-GOST R

GOST 30530-1997 Noise. Methods for calculation of limit admissible nose characteristics of stationary machines

Association Francaise de Normalisation

NF ISO 12828-1:2012 Validation method for fire gas analyzes - Part 1: limits of detection and quantification

GSO

OS GSO ISO 12828-1:2015 Validation method for fire gas analysis -- Part 1: Limits of detection and quantification
BH GSO ISO 12828-1:2017 Validation method for fire gas analysis -- Part 1: Limits of detection and quantification
GSO ISO 12828-1:2015 Validation method for fire gas analysis -- Part 1: Limits of detection and quantification
GSO ISO 15708-2:2013 Non-destructive testing -- Radiation methods -- Computed tomography -- Part 2: Examination practices
OS GSO ISO 15708-2:2013 Non-destructive testing -- Radiation methods -- Computed tomography -- Part 2: Examination practices

SCC

DANSK DS/ISO 12828-1:2012 Validation method for fire gas analysis - Part 1: Limits of detection and quantification
AWWA WQTC69463 Monitoring Algal Toxins in French Freshwaters: What Are the Most Relevant Toxins and the Best Analytical Methods?
AWWA ACE59929 Detection Limits for Security-Based Rapid Analytical Techniques

VN-TCVN

TCVN 6661-1-2000 Water quality.Calibration and evaluation of analytical methods and estimation of performance characteristics.Part 1: Statistical evaluation of the linear calibration functions
TCVN 4172-1985 Rolling bearings.Method of calculation of limited rotation frequency

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 140 ADD A-2014 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs
ASHRAE 140-2017 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs
ASHRAE 140-2014 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs
ASHRAE 140 ADD B-2007 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs
ASHRAE 140 ADD A-2008 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs
ASHRAE 140 ADD A-2006 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 140-2001 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs
ASHRAE 140 ADD B-2020 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs

American National Standards Institute （ANSI)

ANSI/ASHRAE 140 Addendum B-2020 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs
ANSI/ASHRAE 140c-2011 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs

Indonesia Standards

SNI 19-1654-1989 Weighted sound pressure level (weighted A), Measurement and analysis method

AGMA - American Gear Manufacturers Association

94FTM2-1994 Analytical Method for the Calculation of the Efficiency of Planetary Gears

American Society for Testing and Materials (ASTM)

ASTM D3238-95(2000) Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
ASTM D3238-17 Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
ASTM D3238-95(2000)e1 Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
ASTM D3238-17a Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
ASTM D4460-22a Standard Practice for Calculating Precision Limits Where Values Are Calculated from Other Test Methods
ASTM D4460-22 Standard Practice for Calculating Precision Limits Where Values Are Calculated from Other Test Methods
ASTM D4460-97 Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods
ASTM D4460-97(2005) Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods
ASTM D4460-97(2009) Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods

HU-MSZT

MSZ 3780/16.lap-1961 Oxygen balance calculation using industrial explosive detection methods
MSZ 260/15.lap-1967 Determination of waste water, calculation method of dissolved oxygen and oxygen saturation percentage

Society of Automotive Engineers (SAE)

SAE AMS2269F-2006 Chemical Check Analysis Limits Nickel, Nickel Alloys, and Cobalt Alloys [Superseded: SAE AMS 2268B]

Korean Agency for Technology and Standards (KATS)

KS E 3712-1996(2001) METHODS FOR ULTIMATE ANALYSIS OF COAL AND COKE

ES-UNE

UNE 136021:2019 Finite Element Calculation Method for the determination of the thermal transmittance of masonry built from clay masonry units.

KR-KS

KS B ISO 15708-1-2018(2023) Non-destructive testing — Radiation methods for computed tomography — Part 1: Terminology
KS I ISO 12213-2-2023 Natural gas — Calculation of compression factor — Part 2: Calculation using molar- composition analysis

Others: