Wiring method of withstand voltage tester

Wiring method of withstand voltage tester, Total:264 items.

The international standard classification for "Wiring method of withstand voltage tester" includes: Measurement of electrical and magnetic quantities , Plug-and-socket devices. Connectors , Nuclear energy engineering , Non-destructive testing , Refractories , Environmental testing , Wires , Raw skins, hides and pelts , Textile fibres , Industrial process measurement and control , Glass in general , Electricity. Magnetism. Electrical and magnetic measurements , Electrical wires and cables , Equipment for petroleum and natural gas industries , Glass products , Other standards related to analytical chemistry , Geology. Meteorology. Hydrology , Data storage devices in general , Lines, connections and circuits .

The Chinese standard classification for "Wiring method of withstand voltage tester" includes: Electrical instrument and meter in general , Connector , Nuclear instrument and detector in general , X ray, magnetic powder, fluorescent light and other defectoscope , Fireproof material in general , Material composition analysis instrument and environment detection instrument in general , Wire with insulation layer , Livestock and poultry product , Basic standards and general methods , Industrial automation and control device in general , Laboratory glass, ceramic and plastic vessel , Unshaped refractory , Electromagnetic Measurement , Cable and its accessory , Other electronic instrument and equipment , Technical Management , Technical management , Railway passenger coaches , Daily use glass, ceramic, enamel and plastic products in general , Petroleum exploration, development, gathering and transportation equipment in general , Industrial technical glass , Meteorology , Iron ore , Magnetic recording material , Telecommunication technical requirements and interface .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 10261-1988 Test procedures for stabilized d.c high/low voltage power for nuclear instruments
GB/T 12272-1990 Measuring method of radio-frequency high potential withstanding voltage for radio frequency coaxial connectors
GB/T 5072-2008 Refractories - Determination of cold compressive strength
GB/T 11606.10-1989 The method of environmental test for analytical instruments--Low air pressure test
GB/T 25926-2010 Industrial-process measurement and control instrument panels—Methods of drawing the wiring and piping diagrams
GB/T 16256-1996 Textile fibres―Determination of linear density―Vibroscope method
GB 12272-1990 RF coaxial connector resistance to RF high potential voltage test method
GB/T 25880-2010 Measurement of fallen hair for fur—Method of instrument for fallen hair
GB/T 5073-1985 Test method for creep in compression of refractory products
GB/T 5072-2023 Refractory products—Determination of cold compressive strength
GB/T 11462-1989 Test methods of spectrum analyzers
GB/T 26592-2011 Non-destructive testing instruments—Properties test methods of industrial X-ray apparatus
GB/T 26594-2011 Non-destructive testing instruments—Properties test methods of industrial X-ray tube
GB/T 32192-2015 Withstanding voltage tester
GB/T 4074.21-2018 Winding wires test methods—Part 21:Electrical endurance under high frequency voltage impulses
GB/T 5073-2005 Refractory products—Test method of creep in compression
GB/T 42413-2023 Glassware—Test method for freezing resistance of glass containers

National Metrological Verification Regulations of the People's Republic of China

JJG 795-1992 Verification Regulation of Withstanding Voltage Tester
JJG 795-2004 Verification Regulation of Withstanding Voltage Testers
JJG 795-2016 Withstanding Voltage Testers

Group Standards of the People's Republic of China

T/GDCKCJH 063-2022 Performance requirements and testing methods for ultra-low frequency withstand voltage testers
T/CSAE 303-2023 Test methods for automotive low-voltage wire harness design validation
T/QGCML 188-2021 High-voltage transmission line conductor connection method
T/CAIA YQ003-2016 Testing Methods for Optical/Electrical Characteristics of Linear Charge Coupled Imaging Device for Spectrometer
T/HBJLXH 006-2023 Ball pressure tester calibration method
T/GDCKCJH 064-2022 Performance requirements and testing methods for cable plug testers
T/QGCML 159-2021 Calibration method of helmet splash resistance molten metal splash tester

Professional Standard - Machinery

JB/T 4279.11-2008 Verification procedure for test equipment of enamelled winding wire Part11:Breakdown voltage tester
JB/T 4278.4-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 4:Abrasion test device
JB/T 4278.4-1993 Rubber plastic wire and cable test equipment verification method wear-resistant test device
JB/T 4279.12-1994 Enamelled winding wire test equipment and equipment verification method Low-voltage paint film continuity tester
JB/T 4279.13-1994 Enamelled winding wire test equipment and equipment verification method High-voltage paint film continuity tester
JB/T 4279.13-2008 Verification procedure for test equipment of enamelled winding wire Part13:Continuity of insulation tester(high-voltage method)
JB/T 4279.12-2008 Verification procedure for test equipment of enamelled winding wire Part12:Continuity of insulation tester(low voltage method)
JB/T 4279.18-2008 Verification procedure for test equipment of enamelled winding wire Part1: Resistance to refrigerants tester
JB/T 4279.11-1994 Enamelled winding wire test equipment equipment verification method breakdown voltage tester
JB/T 12457-2015 Non-destructive testing instruments-Testing method of X-ray delector for circuit board detection
JB/T 4279.3-1994 Enamelled winding wire test equipment and equipment verification method elongation tester
JB/T 7481-1994 Wave Instrument Test Methods
JB/T 4278.14-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 14:Fire-resisting test device
JB/T 4279.6-1994 Enamelled winding wire test equipment equipment verification method peeling tester
JB/T 4278.19-2011 Verification procedure for test equipment of rubber plastic wire and cable-Part 19:Insulation scrape abrasion test device
JB/T 4279.10-2008 Verification procedure for test equipment of enamelled winding wire Part10:Tester for resistance to solvents
JB/T 4279.10-1994 Enamelled winding wire test equipment verification method solvent resistance tester
JB/T 7480-1994 Current instrument test method

Professional Standard - Electron

SJ 449-1973 Methods of measurement for voltage with standing test for high-voltage rectifier tubes
SJ/T 10300-1991 Test methods for capacitance measuring instruments
SJ/T 11384-2008 General specification of withstanding voltage tester
SJ/T 10298-1991 Test methods for LCR measuring instruments

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB/J 5415-2005 Verfication regulation for withstanding voltage tester

Taiwan Provincial Standard of the People's Republic of China

CNS 13306.2-2000 Specification for radio disturbance and immunity measuring apparatus and methods Part2: Methods of measurement of disturbances and immunity
CNS 13306.1-1998 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1:Radio disturbance and immunity measuring apparatus
CNS 13306-1-1998 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1: Radio disturbance and immunity measuring apparatus (→CNS 13306-1-1、13306-1-2、13306-1-3、13306-1-4、13306-1-5)
CNS 13306-2-2000 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2: Methods of measurement of disturbances and immunity (→CNS 13306-2-1、13306-2-2、13306-2-3、13306-2-4)

Professional Standard - Railway

TB/T 2227-1996 Test Method for Pressure Resistance of Vehicle Electrical Wiring of Passenger Train

National Metrological Technical Specifications of the People's Republic of China

JJF 1378-2012 Program of Pattern Evaluation of Withstanding Voltage Testers
JJF(机械) 1018-2018 Calibration specification for winding turn-to-turn withstand voltage tester
JJF(机械)1018-2018 Calibration specification for winding turn-to-turn withstand voltage tester
JJF(纺织) 050-2015 Calibration Specification for Yarn Abrasion Measuring Instrument
JJF(纺织)050-2015 Calibration Specification for Yarn Abrasion Measuring Instrument

Professional Standard - Electricity

DL/T 1694.4-2017 Calibration specification for high voltage testing instruments. Part 4: Insulation oil voltage withstanding tester
DL/T 1694.2-2017 Calibration specification for high voltage testing instruments Part 2: Power transformer tap-changers tester
DL/T 2007-2019 Electric test integrated wiring test method for power transformer

Professional Standard - Water Conservancy

SL 124-1995 Ccalibration method for cement hydration heat (direct method) tester

Professional Standard - Light Industry

QB/T 3724-1999 Inner containers of the vacuum flask--Resistance to vertical load--Test method

未注明发布机构

ASTM RR-E37-1050 2010 E2744-Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM RR-D01-1135 2007 D4060-Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM RR-D09-1021 1986 D3032-Test Methods for Hookup Wire Insulation
SEMI F33-0708-2008 TEST METHOD FOR CALIBRATION OF ATMOSPHERIC PRESSURE IONIZATION MASS SPECTROMETER (APIMS)
GJB 3383-1998 Adhesive durability test method
ASTM RR-D09-1032 1992 D3032-Test Methods for Hookup Wire Insulation
ASTM RR-B07-1002 2010 B0648-Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor

工业和信息化部

WJ/T 751-2014 Test method for solvent resistance of glue for optical instruments
YD/T 3682-2020 Test methods for remote electric-downtilt antenna interface

Professional Standard - Petroleum

SY 6865-2012 Calibration method of pressure filtration loss tester in drilling fluid
SY/T 6865-2012 Calibration Method of Mid-pressure Drilling Fluid Filter Press
SY 7074-2016 Calibration method of high temperature and high pressure fluid loss tester for drilling fluid
SY/T 7074-2016 Calibration method of HTHP drilling fluid filter press

Professional Standard - Military and Civilian Products

WJ 751-1994 Test method for solvent resistance of adhesives for optical instruments

Professional Standard - Textile

FZ/T 01069-1999 Measuring method of yarn diameter CCD measuring instrument method

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 37983-2019 Testing methods of X-ray diffraction for determining the orientation of crystal materials by rotation
GB/T 37929-2019 Non-destructive testing instruments—Testing methods for life of X-ray tubes
GB/T 37991-2019 Measuring method for ultra-thin glass reheating line shrinkage—Dilatometer method

中国轻工总会

ZBW 0017-1989 Yarn diameter measurement method CCD measuring instrument method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33691-2017 Test method for cup anemometer
GB/T 33693-2017 Test method for ultrasonic anemometer
GB/T 34218-2017 Refractory products--Determination of compressive strength at elevated temperature

Professional Standard - Ocean

HY/T 269-2018 Testing method of ocean pressure measuring instrument

Professional Standard - Chemical Industry

HG/T 4089～4093-2022 Plastic lining equipment hydrostatic test method, electric spark test method, temperature resistance test method, thermal expansion and contraction test method and lining negative pressure test method (2022)
HG/T 2353.5-1992 Filter Element for Magnetic Paint Filtration - Method of Test for Compressive Strength

Military Standard of the People's Republic of China-General Armament Department

GJB 570.7-1988 Typical test methods for meteorological instruments - barometric pressure measurement sensors
GJB 360.27-1987 Test methods for electronic and electrical components Dielectric withstand voltage test
GJB 570.13-1988 Meteorological instrument final test method cloud meter
GJB 2427-1995 Laser Gyroscope Test Method
GJB 7952-2012 Measurement methods for vibratory gyros

Professional Standard - Pharmaceutical Packaging

YBB 0017(03)-2003 Internal Pressure Resistance Determination Method (Trial)

Professional Standard - Agriculture

QB/T 5993-2024 Insulated containers - test method for pressure resistance performance of glass bottles

Professional Standard - Aviation

HBm 66.48-1990 Mini-truck - Test Method for Dust Proof and Dust Resistance of Instrument

Professional Standard - Automobile

QC/T 433-1999 Test method for ceramic insulators of spark plugs - Test method for pressure resistance

Hunan Provincial Standard of the People's Republic of China

DB43/T 2129-2021 Test method for trace carbon residual detector

Professional Standard - Post and Telecommunication

YD/T 1197-2002 Test specification for access network--3.5GHz fixed wireless access

SCC

BS EN 2591-B7:1994 Elements of electrical and optical connection. Test methods-Voltage proof test
CAN/CGSB 4.2 No.11.1-1994(R2013) Textile testing methods - Bursting resistance - Membrane burst meter test (Confirmed 2013)
AS 1635.17.1:1974 Methods of testing pressure sensitive adhesive tape - Resistance to solvent
DANSK DS/ISO 21546:2019 Paints and varnishes – Determination of the resistance to rubbing using a linear abrasion tester (crockmeter)
DANSK DS/EN 60068-2-20:2008 Environmental testing – Part 2-20: Tests – Test T: Test methods for solderability and resistance to soldering heat of devices with leads
AS 2925.5:1987 Methods of testing thermosetting laminated sheet, Method 5: Method for determining resistance to dry heat
CEI EN 60068-2-20:2009 Environmental testing Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
CEI 45-35:1997 Standardized test methods of semiconductor X-ray spectrometers
BS ISO 21546:2019 Paints and varnishes. Determination of the resistance to rubbing using a linear abrasion tester (crockmeter)
AS 2925.3:1987 Methods of testing thermosetting laminated sheet, Method 3: Method for determining resistance to surface wear
AS 1580.483.1:1973 Paints and related materials - Methods of test, Method 483.1: Resistance to artificial weathering (carbon-arc type instruments)
DANSK DS/EN IEC 60068-2-20:2021 Environmental testing – Part 2-20: Tests – Test Ta and Tb: Test methods for solderability and resistance to soldering heat of devices with leads
AS 1635.15.1:1974 Methods of testing pressure sensitive adhesive tape - Dielectric breakdown and proof voltage
AS 1774.1:1981 Refractories and refractory materials - Physical test methods, Method 1: The determination of cold compressive strength
DANSK DS/EN ISO 21546:2020 Paints and varnishes – Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019)
AS 1774.1:1991 Refractories and refractory materials - Physical test methods, Method 1: Determination of cold compressive strength
NS-EN ISO 7458:2004 Glass containers — Internal pressure resistance — Test methods (ISO/FDIS 7458:2004)
AS 1774.1:1976 Methods for physical testing of refractories and refractory materials, Method 1: The determination of cold compressive strength
AS 2925.4:1987 Methods of testing thermosetting laminated sheet, Method 4: Method for determining resistance to immersion in boiling water
AS Z24.17.1:1968 Methods of test for pressure sensitive adhesive tapes, Method 17.1: Resistance to solvents - Resistance to solvent
AS Z24.17.1:1970 Methods of test for pressure sensitive adhesive tapes, Method 17.1: Resistance to solvents - Resistance to solvent
AS 2925.11:1987 Methods of testing thermosetting laminated sheet, Method 11: Method for determining resistance to cigarette burns
NS-EN ISO 21546:2020 Paints and varnishes — Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019)

RU-GOST R

GOST 22091.4-1986 X-ray devices. The methods of measuring of the voltage of X-ray tube
GOST 22091.1-1984 X-ray devices. The methods of measuring of heater current and heater voltage
GOST 22091.15-1986 X-ray devices. The method of electric strenght test
GOST ISO 13402-2011 Surgical and dental hand instruments. Determination of resistance against autoclaving, corrosion and thermal exposure. Test methods
GOST 22091.5-1986 X-ray devices. The methods of measuring X-ray tube current
GOST 15634.4-1970 Magnet wire. Methods of the breakdown voltage test
GOST 30630.1.8-2002 Test methods for resistance to environmental factors of machines, instruments and other articles. Time-history vibration tests
GOST 22091.11-1980 X-ray devices. The method of the measuring of the time operation readiness of the device
GOST 22091.2-1984 X-ray devices. The methods of measuring of the current and the voltage of injection of X-ray betatrons
GOST 31175-2003 Refractory mortars. Methods of testing
GOST 14340.7-1974 Enamelled round winding wires. Method of the breakdown voltage test

Korean Agency for Technology and Standards (KATS)

KS F 2296-1999 Windows and doorsets - Wind resistance test
KS K 0650-1-2022 Test method for color fastness to rubbing : Crock meter method
KS C 8111-2023 Testing methods for wiring devices
KS W 6062-1990 WEATHERABILITY Test methods for aeronautical instrument
KS C 8111-2008(2018) Testing methods for wiring devices
KS L 2325-1996 GLASS CONTAINERS - Internal pressure resistance－Test methods
KS D 0079-2010 Differential pressure testing method of titanium welded tubes
KS L 3129-2020 Testing method for coefficient of linear variation of refractory mortar
KS L 3115-1-2010 Testing method for cold compressive strength of refractory bricks-Part 1:Test without packing
KS L 3115-1-2015 Testing method for cold compressive strength of refractory bricks — Part 1: Test without packing
KS L 3115-2-2012 Testing method for cold compressive strength of refractory bricks-Part 2:Test with packing
KS B 5648-2022 Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
KS C 6301-2002 TESTING METHODS FOR LOW FREQUENCY TRANSFORMERS AND INDUCTORS
KS C 6301-1987 TESTING METHODS FOR LOW FREQUENCY TRANSFORMERS AND INDUCTORS
KS D 0079-2010(2020) Differential pressure testing method of titanium welded tubes
KS C 6811-1979 MEASUREMENT METHODS OF RECEIVING ANTENNA FOR UHF TELEVISION BROADCAST TRANSMISSIONS
KS C 6811-1982 MEASUREMENT METHODS OF RECEIVING ANTENNA FOR UHF TELEVISION BROADCAST TRANSMISSIONS
KS L 3117-2020 Testing method for residual linear expansion and contraction of refractory bricks
KS C 6811-1979(2002) MEASUREMENT METHODS OF RECEIVING ANTENNA FOR UHF TELEVISION BROADCAST TRANSMISSIONS
KS L 3305-2012 Testing method for compressive strength of insulating fire bricks
KS B 5550-2013 Testing method of patable speed measuring instrument
KS L 3305-1982 Testing method for compressive strength of insulating fire bricks
KS L 3305-1987 Testing method for compressive strength of insulating fire bricks
KS L 3116-1995 Testing method for thermal linear expansion of fire bricks
KS T 1322-2017 Testing method for pressure sensitive adhesive resistance of processed papers for packaging
KS L 3140-2016(2021) Testing method for compressive creep of refractry bricks
KS L 3140-2021 Testing method for compressive creep of refractry bricks
KS L 3506-2001 TESTING METHOD FOR REFRACTORINESS OF REFRACTORY RAW MATERIALS
KS L 3140-2016 Testing method for compressive creep of refractry bricks
KS B 5648-2002(2022) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
KS K 0470-1980 TESTING METHOD FOR COLOR FASTNESS TO SWEAT OF DYED YARN:PERSPIROMETER method
KS C 1310-2019 Earth testers
KS L 3140-2006 Testing method for compressive creep of refractry bricks

Japanese Industrial Standards Committee (JISC)

JIS P 8114:1994 Testing method for folding endurance of paper and paperboard by schopper tester
JIS Z 4511:1991 Methods of calibration for exposure meters and dose-equivalent meters
JIS R 2658:1995 Testing method for compressive creep of refractory bricks
JIS C 60068-2-20:2022 Environmental testing -- Part 2-20: Tests -- Tests Ta and Tb: Test methods for solderability and resistance to soldering heat of devices with leads
JIS R 2206:1991 Testing method for cold crushing strength of refractory bricks
JIS A 1515:1994 Test method for wind resistance of windows and doors
JIS R 2618:1995 Testing method for thermal conductivity of insulating fire bricks by hot wire

CN-STDBOOK

图书 A-4743 Detection technology and application of withstand voltage tester

Standard Association of Australia （SAA）

AS 1774.1:2000 Refractories and refractory materials - Physical test methods - Determination of cold compressive strength
AS/NZS 4275.3:1995 Methods of testing underground marking tape - Impact resistance
AS/NZS 4275.4:1995 Methods of testing underground marking tape - Chemical resistance
AS/NZS 4275.2:1995 Methods of testing underground marking tape - Tear resistance

GSO

GSO ISO 7458:2011 Glass containers – internal pressure resistance - test methods
OS GSO ISO 7458:2011 Glass containers – internal pressure resistance - test methods
OS GSO IEC 60068-2-20:2017 Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
GSO IEC 60068-2-20:2017 Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
BH GSO OIML R145-2:2022 Ophthalmic instruments – Impression and applanation tonometers – Part 2 – Test methods
GSO OIML R145-2:2021 Ophthalmic instruments – Impression and applanation tonometers – Part 2 – Test methods

German Institute for Standardization

DIN EN ISO 7458:2004-05 Glass containers - Internal pressure resistance - Test methods (ISO 7458:2004); German version EN ISO 7458:2004
DIN EN ISO 21546:2021-02 Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019); German version EN ISO 21546:2020
DIN EN 2591-207:1998-03 Aerospace series - Elements of electrical and optical connection; test methods - Part 207: Voltage proof test; German version EN 2591-207:1996 / Note: Applies in conjunction with DIN EN 2591 (1992-12).
DIN EN 1052-1:1998 Methods of test for masonry - Part 1: Determination of compressive strength; German version EN 1052-1:1998

JP-JCS

JCS 7507-2007 Heat proof test methods for wire and cable joints
JCS 7504-2009 Heat proof test methods for wires and cables
JCS 7501-2011 Test methods for OPGW (Composite Fiber-Optic Ground Wire)

Association Francaise de Normalisation

NF EN ISO 7458:2004 Glass containers - Resistance to internal pressure - Test methods

American Society for Testing and Materials (ASTM)

ASTM D3883-04(2016) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM D3883-04(2020) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM D6587-12 Standard Test Method for Yarn Number Using Automatic Tester
ASTM D6587-12(2018) Standard Test Method for Yarn Number Using Automatic Tester
ASTM E2744-16e1 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM D6612-00(2022) Standard Test Method for Yarn Number and Yarn Number Variability Using Automated Tester
ASTM D6611-16 Standard Test Method for Wet and Dry Yarn-on-Yarn Abrasion Resistance
ASTM D6611-00 Standard Test Method for Wet and Dry Yarn-on-Yarn Abrasion Resistance
ASTM D3032-16 Standard Test Methods for Hookup Wire Insulation
ASTM D5591-22 Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM D3032-21a Standard Test Methods for Hookup Wire Insulation
ASTM D3032-21 Standard Test Methods for Hookup Wire Insulation
ASTM B648-10 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM D2670-95(2004) Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)
ASTM D2670-95(2010) Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)
ASTM D7594-24 Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM D7594-24e1 Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

RO-ASRO

STAS SR ISO 7458:1995 Glass containers - Internai pressure resistance - Test methods
STAS 815-1988 LABORATORY PORCELAIN Test methods

NZ-SNZ

AS/NZS 1580.483.2:1994 Paints and Related Materials - Methods of Test Method 483.2: Resistance to Artificial Weathering - Fluorescent UV-Condensation Type Instruments
AS/NZS 1580.403.2:1994 Paints and Related Materials - Methods of Test Method 403.2: Abrasion Resistance - Taber Abraser

Canadian General Standards Board （CGSB)

CAN/CGSB-4.2 NO.26.5-M89-1989 Textile Test Methods Water Resistance - High-Pressure Penetration Test
CGSB 4.2 NO 26.3-2010-CAN/CGSB-2010 Methods for testing textile fabrics - Determination of resistance to water penetration - Hydrostatic pressure testing

Society of Automotive Engineers (SAE)

SAE TS323-1-1985 TS323 Test for Electrical Connectors Dielectric Withstand
SAE J1742-2022 Connections for High Voltage On-Board Vehicle Electrical Wiring Harnesses - Test Methods and General Performance Requirements

PL-PKN

PN G04026-1987 Liquids applied in hydraulik systems of mining machinery and equipment Tesi methods and fire resistant evaluation
PN E04063-11-1987 On-load tap-changers Test methods Mechanical endurance test
PN E04164-10-1988 Enamelled winding round wires Methods of test Heat bonding test

AENOR

UNE-EN 2591-207:1996 AEROSPACE SERIES. ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION. TEST METHODS. PART 207: VOLTAGE PROOF TEST.
UNE-EN 1534:2011 Wood flooring - Determination of resistance to indentation - Test method
UNE-EN ISO 7458:2004 Glass containers - Internal pressure resistance - Test methods (ISO 7458:2004)
UNE 103602:1996 TEST METHOD FOR ONE-DIMENSIONAL SWELL PRESSURE OF A SOIL IN CONSOLIDOMETER.

CH-SNV

SN ISO 105/E08:1984 Textiles — Tests for colour fastness Section B02: Colour fastness to light: Xenon arc

CZ-CSN

CSN 72 6031-1982 Refractory materials. Method of test for linear thermal expansion

ES-UNE

UNE-EN ISO 21546:2021 Paints and varnishes - Determination of the resistance to rubbing using a linear abrasion tester (crockmeter) (ISO 21546:2019)
UNE-EN IEC 60068-2-20:2021 Environmental testing - Part 2-20: Tests - Test Ta and Tb: Test methods for solderability and resistance to soldering heat of devices with leads (Endorsed by Asociación Española de Normalización in June of 2021.)
UNE 41250-4:2016 Test methods for measurement of pavement deflection. Part 4: Curviameter

European Association of Aerospace Industries

AECMA PREN 2591-B7-1992 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part B7 - Voltage Proof Test Edition 1

Danish Standards Foundation

DS/EN 60068-2-20:2008 Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
DS/EN 1534:2011 Wood flooring - Determination of resistance to indentation - Test method

HU-MSZT

MSZ KGST 2566-1980 General industrial requirements and test methods for differential pressure measuring instruments

Electronic Industrial Alliance (U.S.)

EIA RS-186-4E-1978 STANDARD TEST METHODS FOR PASSIVE ELECTRONIC CQMPONENT PARTS METHOD 4: DIELECTRIC TEST (WITHSTAND VOLTAGE)

Electronic Components, Assemblies and Materials Association

ECA 186-4E-1978 Passive Electronic Component Parts, Test Methods for; Method 4: Dielectric Test (Withstanding Voltage)

British Standards Institution (BSI)

BS EN ISO 21546:2020 Paints and varnishes. Determination of the resistance to rubbing using a linear abrasion tester (crockmeter)
17/30345182 DC BS ISO 2100-207. Aerospace elements of electrical and optical connection. Test methods. Part 207. Voltage proof test
BS EN 14187-5:2019 Cold applied joint sealants. Test methods. Determination of the resistance to hydrolysis
BS 7976-3:2002 Pendulum testers - Method of calibration
BS 1902-9.1:1987 Methods of testing refractory materials - Chemical analysis by instrumental methods - Analysis of alumino-silicate refractories by X-ray fluorescence

Lithuanian Standards Office

LST EN 1534-2011 Wood flooring - Determination of resistance to indentation - Test method
LST EN ISO 7458:2004 Glass containers - Internal pressure resistance - Test methods (ISO/FDIS 7458:2004)
LST EN 60068-2-20-2008 Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads (IEC 60068-2-20:2008)

European Committee for Standardization (CEN)

EN 14231:2003 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester

US-ACEI

IPC TM-650 2.6.1-1997 Fungus Resistance Printed Wiring Materials(Test Methods Manual)

Electronic Components, Assemblies and Materials Association

ECA EIA-448-22-1990 Resistance to Soldering Heat, Soldering Method
ECA 448-22-1990 Resistance to Soldering Heat, Soldering Method

American National Standards Institute （ANSI)

ANSI/EIA 448-22:1990 Resistance to Soldering Heat, Soldering Method
ANSI/SCTE 63-2009 Test Method for Voltage Withstand of Outer Jacket

Indonesia Standards

SNI 19-6463-2000 Method for calibration of bourdon manometers by dead weight tester
SNI 06-2482-1991 Water, Test method for flouride content by spectrophotometer in a red alazaryn manuver

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 853-1985 IEEE Recommended Practice for Voltage-Endurance Testing of Enameled Wire

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 2591-B7-1992 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part B7 - Voltage Proof Test (Edition 1)

VN-TCVN

TCVN 5241-1990 Sewing thread.Method for determination of diameter on thickness tester
TCVN 6530-1-1999 Refractories.Methods of test.Part 1: Determination of cold compressive strength

ECIA - Electronic Components Industry Association

RS-364-20A-1983 TP-20A Withstanding Voltage Test Procedure for Electrical Connectors

Defense Logistics Agency

DLA MIL-DTL-13169 D-2006 WIRE, ELECTRICAL (FOR INSTRUMENT TEST LEADS)

SG-SPRING SG

SS 78 Pt.A16-1987 Testing Concrete Part A16 : Method For Determination Of Compressive Strength

YU-JUS

JUS L.G1.009-1994 Direct acting indicating analogue electrical measuring instruments and their accessories- Test methods

SAE - SAE International

SAE J1742-2005 Connections for High Voltage On-Board Vehicle Electrical Wiring Harnesses - Test Methods and General Performance Requirements

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NASM1312-5-1997 Fastener Test Methods; Method 5 Stress Durability

PH-BPS

PTS 47-1969 Standardization of Method of Test for Color Fastness to Pressing:Hot Pressing

Others: