Pitch carbon isotope measurement method
Pitch carbon isotope measurement method, Total:411 items.
The international standard classification for "Pitch carbon isotope measurement method" includes: Sugar and sugar products , Soil quality and pedology in general , Fissile materials , Coals , Organic chemicals , Radiation measurements , Fruits and derived products , General methods of tests and analysis for food products , Construction equipment , Measurement of volume, mass, density, viscosity , Carbon materials .
The Chinese standard classification for "Pitch carbon isotope measurement method" includes: Sugar refining , Soil and fertilizer in general , Basic standard and general method , Radioactive metal ore , Coal for vehicle, vessel and coal gas , Coal tar processed products , Petroleum geology exploration , Ionizating Radiation Measurement , Beverages in general , Basic standards and general methods , Architectural engineering construction machinery , Hydrogeological survey , Carbon material in general .
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 18340.2-2001 Organic geochemical measurements geological samples--Method for the analysis the organic matters for stable carbon isotopic composition
- GB/T 42490-2023 Soil quality—Determination of total content and isotope ratio of organic carbon and nitrogen of soil and biological samples—Stable isotope ratio mass spectrometry
- GB/T 18932.25-2005 Method for the determination of penicilin G,penicillin V,nafcillin,oxacillin,cloxacillin,dicloxacillin residues in honey—LC-MS-MS method
- GB/T 2295-1980 Method for determination of coal tar pitch ash content
- GB/T 3816-1983 Determination of asphalt in montane wax
- GB/T 17672-1999 Determinations for isotopes of lead, strontium and neodymium in rock samples
- GB/T 18932.1-2002 Method for the determination of C-4 plant sugars in honey--Stable carbon isotope ratio mehtod
- GB/T 18340.2-2010 Organic geochemical analysis method for geological samples—Part 2:Determination of organic carbon stable isotopic component—Isotopic mass spectrometry
Professional Standard - Petroleum
- SY/T 5239-1991 Methods for Hydrogen and Carbon Isotope Analysis of Petroleum and Sedimentary Organic Matter
- SY/T 5238-1991 Hydrogen, carbon and oxygen isotope sample preparation method in natural gas
- SY/T 6039-1994 Carbonate Rock Carbon Oxygen Isotope Determination Phosphoric Acid Method
- SY/T 5238-2008 Analysis method for carbon and oxygen isotope of organic matter and carbonate
National Metrological Technical Specifications of the People's Republic of China
- JJF 1267-2010 Primary method of isotope dilution mass spectrometry
- JJF 1508-2015 Primary Method of Isotopic Abundance Measurement
Professional Standard - Machinery
- JB/T 6774-1993 Method for determination of fixed carbon in coal tar pitch
Professional Standard - Light Industry
- QB/T 4852-2015 Determination of the carbon isotope ratio(13C/12C)of CO2 in sparkling wines. Method using isotope ratio mass spectrometry
- QB/T 4853-2015 Determination of the oxygen isotope ratio(18O/16O) of water in wines . Method using isotopic equilibrium exchange reaction
- QB/T 4855-2015 Determination of the oxygen isotope ratio (180/160) of water in fruit juices. Method using isotopic equilibrium exchange reaction
- QB/T 4854-2015 Determination of the carbon isotope ratio (13C/12C) of total sugar and pulp in orange juice. Method using isotope ratio mass spectrometry
国家能源局
- SY/T 7359-2017 The method for isotopic ratio determination of noble gases by mass spectrometry
- SY/T 5238-2019 Analysis method for carbon and oxygen isotope in organic matter and carbonate
Group Standards of the People's Republic of China
- T/CNFIA 142-2022 Determination of the 13C/12C isotope ratio of ascorbic acid in vitamin C products
- T/HBJLXH 003-2023 Calibration method for asphalt wax content tester
- T/CCMA 0152-2023 Operation quality test method of synchronous fiber and chip seal truck
- T/GRM 048-2022 Determination of Mercury in Source Rock
- T/NAIA 0208-2023 Determination of Stable Isotope Ratio of Carbon and Nitrogen in Lycium Barbarum by Stable Isotope Analyzer Method
能源部
- SY 5238-1991 Methods for sample preparation of hydrogen, carbon and oxygen isotopes in natural gas
未注明发布机构
- DIN EN 12697-13 E:2015-05 Bituminous mixtures - Test methods for hot mix asphalt - Part 13: Temperature measurement
- DIN CEN/TS 17481:2020 Bitumen and bituminous binders - Determination of salt content in bitumen - Electrical conductivity method
- GJB 8791-2018 Mass spectrometric method for measuring abundances of lithium isotope
- NF T66-023*NF EN 1428:2012 Bitumen and bituminous binders - Determination of water content in bitumen emulsions - Azeotropic distillation method.
- ASTM RR-D04-1042 2018 D8078-Test Method for Ash Content of Asphalt and Emulsified Asphalt Residues
- DIN EN 16849 E:2015-04 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance
- DIN CEN/TS 17482:2020 Bitumen and bituminous binders - Determination of acid number of bitumen - Potentiometric method
Inner Mongolia Provincial Standard of the People's Republic of China
- DB15/T 1705-2019 Detection method of isotope abundance value of "Xilinguole mutton"
- DB15/T 975-2016 Detection method of carbon and nitrogen isotope abundance ratio in beef and mutton of livestock products
工业和信息化部
- QB/T 5299-2018 Determination of the 13C/12C isotope ratio of glycerol in wines. Method using liquid chromatography coupled to isotope ratio mass spectrometry
- QB/T 5164-2017 Determination of the stable carbon isotope ratio C13C/12C of ethanol in Baijiu--Gas chromatography-combustion-isotope ratio mass spectrometry
- QB/T 5163-2017 Determination of the stable carbon isotope ratio(13C/12C ) of acetic acid in vinegar-Gas chromatography-combustion-isotope ratio mass spectrometry
Professional Standard - Geology
- DZ/T 0184.18-1997 Determination of carbon and oxygen isotopic composition of carbonate in trace paleontological fossils
- DZ/T 0184-1997 Isotopic geological sample analysis method
- DZ/T 0064.77-1993 Groundwater quality test methods - the determination ofoxygen isotope with CO2-H2O balance method
- DZ/T 0184.21-1997 Determination of carbon dioxide of oxygen isotope in natural water - water balance method
- DZ/T 0184.17-1997 Determination of carbon and oxygen isotopic composition in carbonate mineral or rock in phosphoric acid method
Taiwan Provincial Standard of the People's Republic of China
- CNS 2489-1965 Determination of Fixed Carbon in Asphalt and Coal Tar
海关总署
- SN/T 4675.31-2019 Determination of carbon stable isotope ratio of glycerol in wine for expore LC-IRMS method
Professional Standard - Agriculture
- SN/T 5035-2018 Method for the determination of carbon stable isotope ratio inalcoholic beverage ethanol for export - Gas chromatography-combustion - Isotope ratio mass spectrometer method (GC-C-IRMS)
Professional Standard - Aerospace
- QJ 2781-1995 Method for Determination of Carbon, Hydrogen and Nitrogen Content in Carbon Materials
- QJ 2781A-2004 Determination of the carbon content the hydrogen content and the nitrogen content of carbonaceous material
Professional Standard - Ferrous Metallurgy
- YB/T 031-1992 Method for determination of naphthalene content in coal tar pitch road oil
- YB/T 1430-1997 Carbon materials. Determination of the sulphur content
National Metrological Verification Regulations of the People's Republic of China
- JJG 2096-2017 Concentration of Element Based on Isotope Dilution Mass Spectrometry
Professional Standard - Energy
- NB/T 11338-2023 Shale gas一Determination of the ratio of adsorbed gas to free gas一Methane carbon isotope quantitative method
Professional Standard - Nuclear Industry
- EJ/T 842-1994 Zinc Isotope Ratio and Zinc Content Measurement Double Dilution Mass Spectrometry
Professional Standard - Commodity Inspection
- SN/T 2096-2008 Determination of acrylamide in food—Isotope internal standard
Professional Standard - Petrochemical Industry
- SH/T 0266-1992 Petroleum Asphaltene Content Determination Method
Korean Agency for Technology and Standards (KATS)
- KS F 2354-1982 Standard test method for asphalt content from asphalt paving mixtures
- KS M ISO 9055:2004 Carbonaceous materials for the production of aluminium-Pitch for electrodes-Determination of sulfur content by the bomb method
- KS F 2354-2013 Standard test method for asphalt content from asphalt paving mixtures
- KS M ISO 9055:2013 Carbonaceous materials for the production of aluminium-Pitch for electrodes-Determination of sulfur content by the bomb method
- KS M ISO 6999:2003 Carbonaceous materials for the production of aluminium-Pitch for electrodes-Determination of density-Pyknometric method
- KS F 2490-2006 Standard test method for asphalt content of hot-mix asphalt by ignition method
- KS M ISO 6376:2003 Carbonaceous materials for the production of aluminium-Pitch for electrodes-Determination of content of toluene-insoluble material
- KS M ISO 6791:2017 Determination of quinoline-insoluble(QI) material of pitch
- KS F 2354-2023 Standard test method for asphalt content from asphalt paving mixtures
- KS M ISO 6791:2007 Determination of quinoline-insoluble(QI) material of pitch
- KS M 2254-2007 Testing method for ductility of bituminous materials
- KS M ISO 5939:2013 Carbonaceous materials for the production of aluminium-Pitch for electrodes-Determination of water content-Azeotropic distillation (Dean and Stark) method
- KS F 2490-2016(2021) Standard test method for asphalt content of hot-mix asphalt by ignition method
- KS F 2490-2022 Standard test method for asphalt content of hot-mix asphalt by ignition method
- KS F 2365-2002 TESTING METHOD FOR QUANTITATIVE EXTRACTION OF BITUMEN FROM BITUMINOUS PAVING MIXTURES
- KS M 2248-2005(2020) Testing method for kinematic viscosity of asphalts(bitumens)
- KS F 2490-2016 Standard test method for asphalt content of hot-mix asphalt by ignition method
- KS F 2365-1995 Testing Method for Quantitative Extraction of Bitumen from Bitminous Paving Mixtures
- KS M ISO 6998:2013 Carbonaceous materials for the production of aluminium-Pitch for electrodes-Determination of coking value
- KS M ISO 6998:2003 Carbonaceous materials for the production of aluminium-Pitch for electrodes-Determination of coking value
- KS M ISO 5940:2003 Carbonaceous materials for the production of aluminium-Pitch for electrodes-Determination of softening point by the ring-and-ball method
- KS F 2365-1995(2000) TESTING METHOD FOR QUANTITATIVE EXTRACTION OF BITUMEN FROM BITUMINOUS PAVING MIXTURES
- KS M ISO 10238:2004 Carbonaceous materials used in the production of aluminium-Pitch for electrodes-Determination of sulfur content by an instrumental method
- KS M ISO 10238:2013 Carbonaceous materials used in the production of aluminium-Pitch for electrodes-Determination of sulfur content by an instrumental method
- KS F 2493-2007 Standard test method of binder run-off test for porous asphalt mixtures
- KS M ISO 9055-2004(2009) Carbonaceous materials for the production of aluminium-Pitch for electrodes-Determination of sulfur content by the bomb method
- KS F 2354-2013(2018) Standard test method for asphalt content from asphalt paving mixtures
- KS M ISO 9055-2013 Carbonaceous materials for the production of aluminium-Pitch for electrodes-Determination of sulfur content by the bomb method
- KS M ISO 10238-2004(2009) Carbonaceous materials used in the production of aluminium-Pitch for electrodes-Determination of sulfur content by an instrumental method
Indonesia Standards
- SNI 03-3640-1994 Test method of asphalt content in asphalt mixture by extraction use soklet instrument
- SNI 03-6894-2002 Test method for asphalt content from asphalt mixtures by centrifuge
- SNI 03-3641-1994 Test method for water content of emulsified asphalt
SCC
- DANSK DS/CEN/TS 17482:2020 Bitumen and bituminous binders – Determination of acid number of bitumen – Potentiometric method
- BS PD CEN/TS 17482:2020 Bitumen and bituminous binders. Determination of acid number of bitumen. Potentiometric method
- SN-CEN/TS 17482:2020 Bitumen and bituminous binders — Determination of acid number of bitumen — Potentiometric method
- AS 2891.9.3:1993 Methods of sampling and testing asphalt, Method 9.3: Determination of bulk density of compacted asphalt - Mensuration method
- AENOR UNE 104281-1-8:1990 Bituminous and modified bituminous materials. Bituminous and mastic raw materials. Test methods. Water content.
- NS-ENV 13070:1998 Fruit and vegetable juices — Determination of the stable carbon isotope ratio (13C/12C) in the pulp of fruit juices — Method using isotope ratio mass spectrometry
- NS-ENV 12140:1996 Fruit and vegetable juices — Determination of the stable carbon isotope ratio (13C/12C) of sugars from fruits juices — Method using isotope ratio mass spectrometry
- UNE 104281-1-8:1990 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. BITUMINOUS RAW MATERIALS AND MASTICS. TESTING METHODS. WATER CONTENT.
- AS 2891.1:1986 Methods of sampling and testing asphalt, Method 1: Sampling of asphalt
- UNE 104281-1-11:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. BITUMINOUS RAW MATERIALS AND MASTICS. TESTING METHODS. LOSS OF HEATING
- BS 6043-1-1.6:1984 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch-Determination of coking value
- AENOR UNE 104281-2-7:1986 Bituminous and modified bituminous materials. Tars and pitches. Test methods. Naphthalene.
- NS-EN 13702-2:2003 Bitumen and bituminous binders — Determination of dynamic viscosity of modified bitumen — Part 2: Coaxial cylinders method
- AENOR UNE-EN 16849:2017 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance
- NS-EN 12697-47:2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts
- AENOR UNE 104281-2-6:1986 Bituminous and modified bituminous materials. Tars and pitches. Test methods. Phenols.
- SN-CEN/TS 17481:2020 Bitumen and bituminous binders — Determination of salt content in bitumen — Electrical conductivity method
- UNE-EN 13702-2:2004 Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen - Part 2: Coaxial cylinders method
- AASHTO T 287-2014(2018) Standard Method of Test for Asphalt Binder Content of Asphalt Mixtures by the Nuclear Method
- NS-EN 16849:2016 Bitumen and bituminous binders — Determination of water content in bituminous emulsions — Method using a drying balance
- AENOR UNE 104281-2-1:1986 Bituminous and modified bituminous materials. Tars and pitches. Test methods. Sampling.
- DANSK DS/EN 16849:2016 Bitumen and bituminous binders – Determination of water content in bituminous emulsions – Method using a drying balance
- NS-EN 12697-40:2005 Bituminous mixtures — Test methods for hot mix asphalt — Part 40: In situ drainability
- AASHTO T 287-2006(2010) Standard Method of Test for Asphalt Binder Content of Asphalt Mixtures by the Nuclear Method
- AASHTO T 287-2022 Standard Method of Test for Asphalt Binder Content of Asphalt Mixtures by the Nuclear Method
- DANSK DS/CEN/TS 17481:2020 Bitumen and bituminous binders – Determination of salt content in bitumen – Electrical conductivity method
- BS PD CEN/TS 17481:2020 Bitumen and bituminous binders. Determination of salt content in bitumen. Electrical conductivity method
- NS-EN 12697-40:2012 Bituminous mixtures — Test methods for hot mix asphalt — Part 40: In situ drainability
- UNE 104281-2-1:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. TARS AND PITCHES. TESTING METHODS. SAMPLING
- AENOR UNE 104281-2-4:1986 Bituminous and modified bituminous materials. Tars and pitches. Test methods. Distillation.
- DANSK DS/EN 12697-47:2010 Bituminous mixtures – Test methods for hot mix asphalt – Part 47: Determination of the ash content of natural asphalts
- AASHTO T 355-2016 Standard Method of Test for In-Place Density of Asphalt Mixtures by Nuclear Methods
- UNE-EN 12697-40:2006 Bituminous mixtures - Test methods for hot mix asphalt - Part 40: In situ drainability
- DIN EN 12697-47 E:2009 Draft Document - Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of Lake Asphalt; German version prEN 12697-47:2009
- UNE 104281-2-4:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. TARS AND PITCHES. TESTING METHODS. DESTILATION
- AENOR UNE 104281-5-8:1986 Bituminous and modified bituminous materials. Paints and adhesives. Test methods. Water content.
- AENOR UNE 104281-6-4:1985 Bituminous and modified bituminous materials. Armor, sheets and plates. Test methods. Foldability at different temperatures.
- AENOR UNE 104281-1-4:1986 Bituminous and modified bituminous materials. Bituminous and mastic raw materials. Test methods. Penetration.
- DIN EN 16849 E:2015 Draft Document - Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance; German and English version prEN 16849:2015
- AENOR UNE 104281-6-9:1986 Bituminous and modified bituminous materials. Armor, sheets and plates. Test methods. Moisture content.
- NS-EN 12606-2:1999 Bitumen and bituminous binders — Determination of the paraffin wax content — Part 2: Method of extraction
- UNE 104281-6-10:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS, FELTS, SHEETS AND SHINGLES. TESTING METHODS. ANTHRACENE OIL ABSORPTION
- DANSK DS/EN 1428:2012 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method
- AENOR UNE 104281-1-3:1986 Bituminous and modified bituminous materials. Bituminous and mastic raw materials. Test methods. Softening point.
- AENOR UNE 104281-1-5:1986 Bituminous and modified bituminous materials. Bituminous and mastic raw materials. Test methods. Penetration rate.
- AENOR UNE 104281-2-3:1986 Bituminous and modified bituminous materials. Tars and pitches. Test methods. Equiviscosity temperature.
- NS-EN 1428:2012 Bitumen and bituminous binders — Determination of water content in bituminous emulsions — Azeotropic distillation method
- DANSK DS/EN 12697-42:2021 Bituminous mixtures – Test methods – Part 42: Amount of foreign matter in reclaimed asphalt
- AENOR UNE 104281-6-8:1986 Bituminous and modified bituminous materials. Armor, sheets and plates. Test methods. Quantitative composition.
- NS-EN 1428:1999 Bitumen and bituminous binders — Determination of water content in bitumen emulsions — Azeotropic distillation method
- UNE-EN 1428:2000 BITUMEN AND BITUMINOUS BINDERS. DETERMINATION OF WATER CONTENT IN BITUMEN EMULSIONS. AZEOTROPIC DISTILLATION METHOD.
- AS 2891.3.3:1991 Methods of sampling and testing asphalt, Method 3.3: Bitumen content and aggregate grading - Pressure filter method
- AASHTO T 308-2009 Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method
- AS 2891.3.1:1991 Methods of sampling and testing asphalt, Method 3.1: Bitumen content and aggregate grading - Reflux method
- DANSK DS/EN 12697-40:2020 Bituminous mixtures – Test methods – Part 40: In situ drainability
- AENOR UNE 104281-1-10:1986 Bituminous and modified bituminous materials. Bituminous and mastic raw materials. Test methods. Ductility.
- AASHTO T 308-2016 Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method
- 09/30194902 DC BS EN 12697-47. Bituminous mixtures. Test methods for hot mix asphalt. Part 47. Determination of the ash content of lake asphalt
- AASHTO T 308-2010(2015) Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method
- NS-EN 12697-42:2012 Bituminous mixtures — Test methods for hot mix asphalt — Part 42: Amount of foreign matter in reclaimed asphalt
- NS-EN 12697-47:2023 Bituminous mixtures - Test methods - Part 47: Determination of the ash content of natural asphalts
- UNE 104281-6-9:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. SHEET AND REINFORCING MATERIALS. TESTING METHODS. HUMIDITY CONTENT
- AENOR UNE 104281-1-2:1986 Bituminous and modified bituminous materials. Bituminous and mastic raw materials. Test methods. Relative density.
- DIN 51013 E:2023 Draft Document - Isotope analysis - Vocabulary and methods
- UNE-EN 12697-39:2006 Bituminous mixtures - Test methods for hot mix asphalt - Part 39: Binder content by ignition
- DIN EN 1428 E:2011 Draft Document - Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method; German version FprEN 1428:2011
- BS 3680-2C:1967 Measurement of liquid flow in open channels. Dilution methods. Radioisotope techniques
- BS 4690:1971 Method for the determination of solubility of bitumen
- BS 4691:1971 Method for determination of penetration of bitumen
- NS-EN 12697-39:2012 Bituminous mixtures — Test methods for hot mix asphalt — Part 39: Binder content by ignition
- NS-EN 12697-13:2000 Bituminous mixtures — Test methods for hot mix asphalt — Part 13: Temperature measurement
- NS-EN 12697-39:2004 Bituminous mixtures — Test methods for hot mix asphalt — Part 39: Binder content by ignition
- UNE 104281-1-10:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. BITUMINOUS RAW MATERIALS AND MASTICS. TESTING METHODS. DUCTILITY
- AS 2891.3.2:1991 Methods of sampling and testing asphalt, Method 3.2: Bitumen content and aggregate grading - Centrifugal extraction method
British Standards Institution (BSI)
- PD CEN/TS 17482:2020 Bitumen and bituminous binders. Determination of acid number of bitumen. Potentiometric method
- BS EN 12697-13:2000 Bituminous mixtures - Test methods for hot mix asphalt - Temperature measurement
- BS EN 12697-40:2020 Bituminous mixtures. Test methods. In situ drainability
- BS EN 12697-47:2010 Bituminous mixtures.Test methods for hot mix asphalt. Part 47:Determination of the ash content of natural asphalts
- BS 2000-536:2005 Methods of test for petroleum and its products. Bitumen and bituminous binders — Determination of complex shear modulus and phase angle — Dynamic Shear Rheometer (DSR) (Identical with IP 536:2005)
- BS EN 12697-47:2023 Bituminous mixtures. Test methods - Determination of the ash content of natural asphalts
- DD ENV 12140-1997 Method for determination of stable carbon isotope ratio (
C/ C) of sugars from fruit juices, using isotope ratio mass spectrometry - BS EN 13702-2:2004 Methods of test for petroleum and its products - BS 2000-514: Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen - Coaxial cylinders method
- DD ENV 12140:1997 Method for determination of stable carbon isotope ratio (<sup>13</sup>C/<sup>12</sup>C) of sugars from fruit juices, using isotope ratio mass spectrometry
- DD ENV 13070:1998 Fruit and vegetable juices. Determination of the stable carbon isotope ratio (<sup>13</sup>C/<sup>12</sup>C) in the pulp of fruit juices. Method using isotope ratio mass spectrometry
- PD CEN/TS 17481:2020 Bitumen and bituminous binders. Determination of salt content in bitumen. Electrical conductivity method
- BS EN 12697-39:2004 Bituminous mixtures - Test methods for hot mix asphalt - Binder content by ignition
- BS EN 12697-39:2012 Bituminous mixtures. Test methods for hot mix asphalt. Binder content by ignition
- BS EN 12697-13:2017 Bituminous mixtures. Test methods. Temperature measurement
- BS EN 16849:2016 Bitumen and bituminous binders. Determination of water content in bituminous emulsions. Method using a drying balance
- BS EN 12697-4:2023 Bituminous mixtures. Test methods. Bitumen recovery. Fractionating column
- BS EN 12697-42:2005 Bituminous mixtures - Test methods for hot mix asphalt - Amount of coarse foreign matter in reclaimed asphalt
- BS EN 12697-42:2012 Bituminous mixtures. Test methods for hot mix asphalt. Amount of foreign matter in reclaimed asphalt
- BS EN 1428:2012 Bitumen and bituminous binders. Determination of water content in bituminous emulsions. Azeotropic distillation method
- BS EN 12697-42:2021 Bituminous mixtures. Test methods. Amount of foreign matter in reclaimed asphalt
- BS ISO 13166:2020 Water quality. Uranium isotopes. Test method using alpha-spectrometry
- BS EN 12606-1:2015 Bitumen and bituminous binders. Determination of the paraffin wax content. Method by distillation
- BS EN 12697-12:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 12:Determination of the water sensitivity of bituminous specimens
- BS EN 12606-1:2015*BS 2000-459.1:2015 Bitumen and bituminous binders. Determination of the paraffin wax content. Method by distillation
- BS EN 12606-1:2007 Bitumen and bituminous binders - Determination of the paraffin wax content - Method by distillation
- BS EN 12606-2:2000 Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of the paraffin wax content - Method by extraction
- BS EN 12606-2:2000*BS 2000-459.2:2000 Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of the paraffin wax content - Method by extraction
- BS EN 13303:2003 Methods of test for petroleum and its products - BS 2000-506: Bitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumens
- BS EN 12697-8:2018 Bituminous mixtures. Test methods. Determination of void characteristics of bituminous specimens
- BS EN 12697-3:2013+A1:2018 Bituminous mixtures. Test methods - Bitumen recovery. Rotary evaporator
AT-ON
- ONR CEN/TS 17482-2020 Bitumen and bituminous binders - Determination of acid number of bitumen - Potentiometric method
- ONR CEN/TS 17481-2020 Bitumen and bituminous binders - Determination of salt content in bitumen - Electrical conductivity method
- OENORM EN 12697-47-2021 Bituminous mixtures - Test methods - Part 47: Determination of the ash content of natural asphalts
Association Francaise de Normalisation
- XP T66-084*XP CEN/TS 17482:2020 Bitumen and bituminous binders - Determination of acid number of bitumen - Potentiometric method
- XP CEN/TS 17482:2020 Bitumens and bituminous binders - Determination of the acid number of a bitumen - Potentiometric method
- XP CEN/TS 17481:2020 Bitumens and bituminous binders - Determination of the salt content of bitumens - Conductivity measurement method
- NF T66-001:1984 Determination of bitumen-content in natural rock-asphalt powders and masitc asphalts with "kumagawa-asphalt" method.
- NF ISO 13166:2020 Water quality - Uranium isotopes - Alpha spectrometry test method
- NF EN 12697-47:2010 Bituminous mixtures - Test methods for hot hydrocarbon mixture - Part 47: determination of the ash content of natural bitumens
- NF T66-082*NF EN 16849:2016 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance
- XP T66-083*XP CEN/TS 17481:2020 Bitumen and bituminous binders - Determination of salt content in bitumen - Electrical conductivity method
- NF P98-818-47*NF EN 12697-47:2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 47 : determination of the ash content of natural asphalts.
- NF EN 16849:2016 Bitumens and bituminous binders - Determination of the water content of bitumen emulsions - Desiccant balance evaporation method
- NF EN 12697-40:2020 Mélanges bitumineux - Méthodes d'essai - Partie 40 : drainabilité in situ
- NF P98-818-13:2001 Bituminous mixtures - Test methods for hot mix asphalt - Part 13 : temperature measurement.
- NF T66-042:1997 Hydrocarbon binders. Determination of the carbochemical heavy distillates content of mixed bitumens. Densimeter method.
- FD T66-042-2016 Hydrocarbon binders - Determination of the carbochemical heavy distillates content of mixed bitumens - Densimeter method
- NF EN 1428:2012 Bitumens and bituminous binders - Determination of water content in bitumen emulsions - Azeotropic distillation method
- NF EN 12697-42:2021 Bituminous mixtures - Test methods - Part 42: quantity of foreign materials present in asphalt aggregates
- NF P98-818-42:2013 Bituminous mixtures - test methods for hot mix asphalt - Part 42: amount of foreign matter in reclaimed asphalt
- NF T66-028:1997 Bituminous binders. Mixed bitumen. Determination of tar content of bituminous tar and tar pitch. Gel permeation chromatography method.
IT-UNI
- UNI CEN/TS 17482-2020 Bitumen and bituminous binders - Determination of acid number of bitumen - Potentiometric method
German Institute for Standardization
- DIN CEN/TS 17482:2020-10 Bitumen and bituminous binders - Determination of acid number of bitumen - Potentiometric method; German version CEN/TS 17482:2020
- DIN V ENV 13070:1998 Fruit and vegetable juices - Determination of stable carbon isotope ratio (<(hoch)13>C/<(hoch)12>C) in the pulp of fruits juices - Method using isotope ratio mass spectrometry; German version ENV 13070:1998
- DIN CEN/TS 17481:2020-10 Bitumen and bituminous binders - Determination of salt content in bitumen - Electrical conductivity method; German version CEN/TS 17481:2020
- DIN 51013:2023-07 Isotope analysis - Vocabulary and methods / Note: Date of issue 2023-06-02
- DIN EN 12697-47:2010-12 Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts; German version EN 12697-47:2010 / Note: To be replaced by DIN EN 12697-47 (2021-10).
- DIN EN 16849:2016-12 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance; German version EN 16849:2016
- DIN EN 1428:2012-03 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method; German version EN 1428:2012
- DIN EN 1428:1999 Bitumen and bituminous binders - Determination of water content in bitumen emulsions - Azeotropic distillation method; German version EN 1428:1999
- DIN EN 12697-47:2021-10 Bituminous mixtures - Test methods - Part 47: Determination of the ash content of natural asphalts; German and English version prEN 12697-47:2021 / Note: Date of issue 2021-09-03*Intended as replacement for DIN EN 12697-47 (2010-12).
- DIN EN 12697-47:2023 Bituminous mixtures - Test methods - Part 47: Determination of the ash content of natural asphalts
- DIN EN 12697-8:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of the air voids content of bituminous specimen; German version EN 12697-8:2003
- DIN V ENV 12140:1996 Fruit and vegetable juices - Determination of the stable carbon isotope ratio (<(hoch)13>C/<(hoch)12>C) of sugars from fruit juices - Method using isotope ratio mass spectrometry; German version ENV 12140:1996
International Organization for Standardization (ISO)
- ISO 10238:1999 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of sulfur content by an instrumental method
- ISO 9055:1988 Carbonaceous materials for the production of aluminium; pitch for electrodes; determination of sulfur content by the bomb method
- ISO 6999:1983 Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of density; Pycnometric method
- ISO 6791:1981 Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of contents of quinoline-insoluble material
- ISO 5939:1980 Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of water content; Azeotropic distillation (Dean and Stark) method
- ISO 6376:1980 Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of content of toluene-insoluble material
- ISO 8006:1985 Carbonaceous materials used in the production of aluminium; Pitch for electrodes; Determination of ash
- ISO 5940:1981 Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of softening point by the ring-and-ball method
- ISO 6998:1997 Carbonaceous materials for the production of aluminium - Pitch for electrodes - Determination of coking value
- ISO 12977:1999 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of volatile matter content
- ISO 8003:1985 Carbonaceous materials used in the production of aluminium; Pitch for electrodes; Measurement of dynamic viscosity
- ISO 13166:2020 Water quality — Uranium isotopes — Test method using alpha-spectrometry
- ISO 5940-1:2019 Carbonaceous materials for the production of aluminium — Pitch for electrodes — Part 1: Determination of softening point by the ring-and-ball method
American Society for Testing and Materials (ASTM)
- ASTM C1380-04 Standard Test Method for Determination of Uranium Content and Isotopic Composition by Isotope Dilution Mass Spectrometry
- ASTM C1380-97 Standard Test Method for Determination of Uranium Content and Isotopic Composition by Isotope Dilution Mass Spectrometry
- ASTM C1380-04(2011) Standard Test Method for Determination of Uranium Content and Isotopic Composition by Isotope Dilution Mass Spectrometry
- ASTM D6307-04 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
- ASTM D6307-05 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
- ASTM D71-24 Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)
- ASTM D4125/D4125M-10(2016) Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method
- ASTM D6307-10 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
- ASTM D4125/D4125M-21 Standard Test Methods for Asphalt Content of Asphalt Mixtures by the Nuclear Method
- ASTM D4125-94(2000) Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method
- ASTM D71-94(2004) Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)
- ASTM D71-94(2009) Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)
- ASTM D71-94(1999) Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)
- ASTM D6307-98 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
- ASTM D4-86(2004) Standard Test Method for Bitumen Content
- ASTM D6307-16 Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method
- ASTM D6307-19 Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method
- ASTM D4125/D4125M-10 Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method
- ASTM D3972-97 Standard Test Method for Isotopic Uranium in Water by Radiochemistry
- ASTM D3972-02 Standard Test Method for Isotopic Uranium in Water by Radiochemistry
- ASTM D4125-05 Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method
- ASTM D6307-05(2010) Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
- ASTM C1473-00 Standard Test Method for Radiochemical Determination of Uranium Isotopes in Urine by Alpha Spectrometry
- ASTM D6866-04 Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis
- ASTM D6866-05 Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis
European Committee for Standardization (CEN)
- CEN/TS 17482:2020 Bitumen and bituminous binders - Determination of acid number of bitumen - Potentiometric method
- DD ENV 13070-1998 Fruit and vegetable juices - Determination of the stable carbon isotope ratio (13C/12C) in the pulp of fruits juices - Method using isotope ratio mass spectrometry
- DD ENV 12140-1996 Fruit and Vegetable Juices - Determination of the Stable Carbon Isotope Ratio (13C/12C) of Sugars from Fruits Juices - Method Using Isotope Ratio Mass Spectrometry
- DD ENV 12 140-1996 Fruit and Vegetable Juices - Determination of the Stable Carbon Isotope Ratio (13C/12C) of Sugars from Fruits Juices - Method Using Isotope Ratio Mass Spectrometry
- CEN/TS 17481:2020 Bitumen and bituminous binders - Determination of salt content in bitumen - Electrical conductivity method
- EN 12697-47:2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts
- EN 12697-39:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 39: Binder content by ignition
- EN 12697-8:2003 Bituminous mixtures Test methods for hot mix asphalt Part 8: Determination of void characteristics of bituminous specimens
- EN 12697-13:2017 Bituminous mixtures - Test methods - Part 13: Temperature measurement
- EN 16849:2016 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance
- EN 12697-47:2023 Bituminous mixtures - Test methods - Part 47: Determination of the ash content of natural asphalts
- prEN 12697-47-2021 Bituminous mixtures - Test methods - Part 47: Determination of the ash content of natural asphalts
- EN 12697-42:2021 Bituminous mixtures - Test methods - Part 42: Amount of foreign matter in reclaimed asphalt
- EN 12697-42:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of foreign matter in reclaimed asphalt
- EN 12697-6:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens
- EN 12697-6:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens
- EN 12697-26:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness
AASHTO - American Association of State Highway and Transportation Officials
- T229-1985 Standard Method of Test for Density of Solid Pitch and Asphalt (Displacement Method) (R 1993)
- T 287-2014 Standard Method of Test for Asphalt Binder Content of Asphalt Mixtures by the Nuclear Method
- T 287-2006 Standard Method of Test for Asphalt Binder Content of Asphalt Mixtures by the Nuclear Method
- T 287-2005 Standard Method of Test for Asphalt Binder Content of Asphalt Mixtures by the Nuclear Method
- TP53-1997 Standard Test Method for Determining the Asphalt Content of Hot Mix Asphalt (HMA) by the Ignition Method
- T 287-2004 Standard Method of Test for Asphalt Binder Content of Asphalt Concrete Mixtures by the Nuclear Method
- T 164-2008 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)
- T 164-2010 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)
- T 164-2011 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)
- TP53-1995 Standard Test Method for Determining the Asphalt Content of Hot Mix Asphalt (HMA) by the Ignition Method (First Edition)
- T 164-2013 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)
- T 164-2006 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot-Mix Asphalt (HMA)
- T 164-2014 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)
- T 308-2010 Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method
- T 308-2005 Standard Method of Test for Determining the Asphalt Binder Content of Hot-Mix Asphalt (HMA) by the Ignition Method
- T 308-2004 Standard Method of Test for Determining the Asphalt Binder Content of Hot-Mix Asphalt (HMA) by the Ignition Method
- T 308-2009 Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method
- T 308-2016 Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method
- T 78-2010 Standard Method of Test for Distillation of Cutback Asphaltic (Bituminous) Products
- T 308-2008 Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method
- T 78-2005 Standard Method of Test for Distillation of Cutback Asphaltic (Bituminous) Products
- T 229-1997 Standard Method of Test for Density of Solid Pitch and Asphalt (Displacement Method) (HM-22; PART IIB; ASTM D 71-94(1999); No Replacement)
AENOR
- UNE 104281-3-2:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. BITUMINOUS EMULSIONS. TESTING METHODS WATER CONTENT
- UNE-ENV 13070:2001 FRUIT AND VEGETABLE JUICES - DETERMINATION OF THE STABLE CARBON ISOTOPE RATIO (13C/12C) IN THE PULP OF FRUIT JUICES - METHOD USING ISOTOPE RATIO MASS SPECTROMETRY.
- UNE-ENV 12140:1997 Fruit and vegetable juices - Determination of the stable carbon isotope ratio (13C/12C) of sugars from fruits juices - Method using isotope ratio mass spectrometry
- UNE 104281-1-7:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. BITUMINOUS RAW MATERIALS AND MASTICS. TESTING METHODS. ASH CONTENT
- UNE 104281-0-4:1987 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. NON BITUMINOUS RAW MATERIALS. TESTING METHODS. MEDIA MASS AND THICKNESS
- UNE 104281-3-9:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. BITUMINOUS EMULSIONS. TESTING METHODS. HARDENING
- UNE 104281-3-13:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. BITUMINOUS EMULSIONS. TESTING METHODS. WATER RESISTANCE
- UNE 104281-3-12:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. BITUMINOUS EMULSIONS. TESTING METHODS. DIRECT FLAME TEST
- UNE 104281-3-11:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. BITUMINOUS EMULSIONS. TESTING METHODS. FLEXIBILITY
- UNE 104281-3-8:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. BITUMINOUS EMULSIONS. TESTING METHODS. ASHES CONTENT (REFER TO NON VOLATILE MATTER)
- UNE 104281-3-10:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. BITUMINOUS EMULSIONS. TESTING METHODS. HEATING TO 100oC
- UNE 104281-2-2:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. TARS AND PITCHES. TESTING METHODS. VISCOSITY BRTA
- UNE 104281-3-3:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. BITUMINOUS EMULSIONS. TESTING METHODS. VISCOSITY SAYBOLT FUROL
- UNE 104281-3-5:1986 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. BITUMINOUS EMULSIONS. TESTING METHODS. RELATIVE DENSITY
- UNE 104281-0-1:1987 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. NOT BITUMINOUS RAW MATERIALS. TESTING METHODS. SAMPLING
- UNE 104281-0-3:1987 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. NO BITUMINOUS RAW MATERIALS. TESTING METHODS. SIEVE ANALYSIS
- UNE-EN 1428:2012 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method
- UNE 104281-0-2:1987 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS NO BITUMINOUS RAW MATERIALS TESTING METHODS. DETERMINATION OF FILLER MOISTURE
- UNE-EN 12697-47:2011 Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts
- UNE-EN 12697-13:2001 Bituminous mixtures - Test methods for hot mix asphalt - Part 13: Temperature measurement.
ES-UNE
- UNE-EN IEC 62793:2022 Fruit and vegetable juices. Determination of the stable carbon isotope ratio (13C/12C) in the pulp of fruit juices. Method using isotope ratio mass spectrometry.
- UNE 34101:2022 Fruit and vegetable juices. Determination of the stable carbon isotope ratio (13C/12C) in the pulp of fruit juices. Method using isotope ratio mass spectrometry.
- UNE 34102:2022 Fruit and vegetables juices. Determination of the stable carbon isotope ratio (13C/12C) of sugars from fruits juices. Method using isotope ratio mass spectrometry.
- UNE-EN 16849:2017 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance
- UNE-EN 12697-40:2022 Bituminous mixtures - Test methods - Part 40: In situ drainability
YU-JUS
- JUS B.H8.617-1980 Testing of bitumen. Insoluble content of bitumen in carbon tetrachloride
- JUS U.M3.020-1996 Bitumen emulsions - Methods of tesling
- JUS U.M8.080-1990 Bitumen strip for vvaterproffing. Method of testing
Danish Standards Foundation
- DS/ENV 13070:1998 Fruit and vegetable juices - Determination of the stable carbon isotope ratio (13C/12C) in the pulp of fruit juices - Method using isotope ratio mass spectrometry
- DS/ENV 12140:1997 Fruit and vegetable juices - Determination of the stable carbon isotope ratio (13C/12C) of sugars from fruit juices - Method using isotope ratio mass spectrometry
- DS/EN 1428:2012 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method
- DS/EN 12697-47:2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts
- DS/EN 12697-13:2000 Bituminous mixtures - Test methods for hot mix asphalt - Part 13: Temperature measurement
- DS/EN 12697-13/AC:2001 Bituminous mixtures - Test methods for hot mix asphalt - Part 13: Temperature measurement
Lithuanian Standards Office
- LST L ENV 13070-2000 Fruit and vegetable juices - Determination of the stable carbon isotope ratio (13C/12C) in the pulp of fruit juices - Method using isotope ratio mass spectrometry
- LST L ENV 12140-2000 Fruit and vegetable juices - Determination of the stable carbon isotope ratio (13C/12C) of sugars from fruits juices - Method using isotope ratio mass spectrometry
- LST EN 12606-2-2000 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 2: Method of extraction
- LST EN 1428-2012 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method
- LST EN 12697-47-2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts
- LST EN 12697-13+AC-2002 Bituminous mixtures - Test methods for hot mix asphalt - Part 13: Temperature measurement
AR-IRAM
- IRAM 6585-1956 How to measure the amount of bitumen dissolved in carbon tetrachloride
- IRAM 6584-1956 How to measure asphalt content
BR-ABNT
- ABNT P-MB-166-1964 experiment method. Asphalt content detection
The American Road & Transportation Builders Association
- AASHTO T 287-2006 Standard Method of Test for Asphalt Binder Content of Asphalt Mixtures by the Nuclear Method
- AASHTO T 287-2014 Standard Method of Test for Asphalt Binder Content of Asphalt Mixtures by the Nuclear Method
- AASHTO T 319-2008 Standard Method of Test for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures
- AASHTO T 287-2020 Standard Method of Test for Asphalt Binder Content of Asphalt Mixtures by the Nuclear Method
- AASHTO T 355-2018 Standard Method of Test for In-Place Density of Asphalt Mixtures by Nuclear Methods
- AASHTO T 164-2014 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)
- AASHTO T 164-2013 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)
- AASHTO T 164-2010 Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)
- AASHTO T 164-2014(R2018) Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA)
- AASHTO T 308-2022 Standard Method of Test for Determining the Asphalt Binder Content of Asphalt Mixtures by the Ignition Method
- AASHTO T 308-2018 Standard Method of Test for Determining the Asphalt Binder Content of Asphalt Mixtures by the Ignition Method
- AASHTO T 308-2010 Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method
- AASHTO T 78-2010 Standard Method of Test for Distillation of Cutback Asphaltic (Bituminous) Products
- AASHTO T 308-2008 Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method
- AASHTO T 59-2001 Standard Method of Test for Testing Emulsified Asphalts
ES-AENOR
- UNE 104-281 Pt.1-8-1990 Method for determination of water content in asphalt and modified asphalt raw materials
- UNE 104-281 Pt.1-7-1986 Determination method of gray matter content in asphalt and modified asphalt raw materials
- UNE 104-281 Pt.1-11-1986 Asphalt materials and modified asphalt emulsion materials. Asphalt raw materials and frankincense. Test Methods. Loss on ignition
- UNE 104-281 Pt.6-2-1986 Asphalt and modified asphalt materials. Armatures, sheets and plates, test methods, dimensions and masses per unit area
- UNE 104-281 Pt.6-2-1985 Asphalt and modified asphalt materials. Armatures, sheets and plates, test methods. Dimensions and mass per unit area
- UNE 104-281 Pt.0-3-1987 Test methods for asphalt and modified asphalt raw materials
- UNE 104-281 Pt.0-4-1987 Asphalt materials and modified asphalt emulsion materials. Asphalt raw materials and frankincense. Test Methods. Quality and average thickness
- UNE 104-281 Pt.6.4-1985 Asphalt and modified asphalt materials. Armatures, sheets and plates, test methods. Flexibility at different temperatures
Standard Association of Australia (SAA)
- AS/NZS 2891.3.1:1997 Methods of sampling and testing asphalt - Bitumen content and aggregate grading - Reflux method
- AS 2891.1.3:2023 Methods of sampling and testing asphalt, Method 1.3: Sampling — Asphalt from slabs
- AS/NZS 2891.10:2015 Sampling and testing methods for bitumen Moisture content of bitumen
- AS/NZS 2891.13.1:2013 Bitumen sampling and testing methods Determination of elastic modulus of bitumen Indirect tensile method
- AS/NZS 2891.3.3:1997 Methods of sampling and testing asphalt - Bitumen content and aggregate grading - Pressure filter method
- AS/NZS 2891.3.2:1997 Methods of sampling and testing asphalt - Bitumen content and aggregate grading - Centrifugal extraction method
- AS 2891.7.1:2004 Methods of sampling and testing asphalt - Determination of maximum density of asphalt - Water displacement method
- AS/NZS 2891.9.3:2014 Asphalt Sampling and Testing Methods for Determination of Bulk Density of Compacted Asphalt
- AS 2891.13.1:1995 Methods of sampling and testing asphalt - Determination of the resilient modulus of asphalt - Indirect tensile method
IN-BIS
- IS 10512-1983 Method for determination of wax content in asphalt
- IS 10511-1983 Method for determination of asphaltenes in bitumen using n-heptane precipitation method
RU-GOST R
- GOST EN 13303-2013 Bitumens and bituminous binders. Method for determination of loss of mass after heating
- GOST R 53586-2009 Juices and juice products. Identification. Determination of stable carbon isotopes by mass-spectrometry
- GOST 11504-1973 Petroleum bitumens. Method for determination of diluent quantity vaporized from liquid bitumens
- GOST 17789-1972 Petroleum bitumens. Method for determination of paraffin content
- GOST 17623-1987 Concrete. Radioisotope method of average densiti determination
- GOST 28967-1991 Petroleum bitumens. X-ray phase method for determination of paraffins
- GOST R 55398-2013 Reinforced bitumen sheets for waterproofing of bridge decks. Method for determination of thickness and mass per unit area
- GOST 31714-2012 Juices and juice products. Identification. Determination of stable carbon isotopes by mass-spectrometry method
- GOST 11507-1978 Petroleum bitumen. Method for determination of Fraas break point
- GOST 23061-2012 Soils. Methods for radioisotope measurement of density and humidity
- GOST 9090-1981 Petroleum wax. Methods for oil determination
- GOST 9090-2000 Petroleum paraffins. Method for determination of oil content
CEN - European Committee for Standardization
- PREN 16849-2015 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance
- EN 12697-8:2018 Bituminous mixtures - Test methods - Part 8: Determination of void characteristics of bituminous specimens
- EN 12697-39:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 39: Binder content by ignition
- EN 12697-6:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens (Incorporates Amendment A1: 2007)
- EN 12697-26:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness
DIN
- DIN EN 13702-2:2004 Bitumen and bituminous binders - Determination of dynamic viscosity of modified bitumen - Part 2: Coaxial cylinders method
GSO
- GSO ISO 13166:2015 Water quality -- Uranium isotopes -- Test method using alpha-spectrometry
- OS GSO ISO 10238:2013 Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Determination of sulfur content by an instrumental method
- OS GSO ISO 9055:2013 Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of sulfur content by the bomb method
- BH GSO ISO 10238:2016 Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Determination of sulfur content by an instrumental method
FI-SFS
- SFS 3049-1977 Determination of basic production and basic production capacity of phytoplankton using carbon radioactive isotope method
HU-MSZT
- MSZ MI 19389-1978 Detection of iodine isotopes in water. Iodine replacement method
TR-TSE
- TS 125-1964 STANDARD METHODS OF TEST FOR BITUMEN
BELST
- STB 2188-2011 Bitumen and bituminous binder. Method for determination of dynamic viscosity
GOST
- GOST R 70542-2022 Coal tar pitch. Method for the determination of ash content
VN-TCVN
- TCVN 7499-2005 Bitumen.Test method for determination of loss on heating
GOSTR
- GOST R 58406.5-2020 Automobile roads of general use. Asphalt mixtures and asphalt. Method for determination of abrasion
KR-KS
- KS F 2354-2013(2023) Standard test method for asphalt content from asphalt paving mixtures
SG-SPRING SG
- SS 86-1988 Methods Of Sampling And Testing Bitumens