Withstand voltage test to remove and test leakage

Withstand voltage test to remove and test leakage, Total:111 items.

The international standard classification for "Withstand voltage test to remove and test leakage" includes: Electricity. Magnetism. Electrical and magnetic measurements , Measurement of electrical and magnetic quantities , Lifts. Escalators .

The Chinese standard classification for "Withstand voltage test to remove and test leakage" includes: Electromagnetic Measurement , Electrical instrument and meter in general , Elevator , Technical Management .

Taiwan Provincial Standard of the People's Republic of China

CNS 9801-2001 Pressure and leak for pressure vessels

National Metrological Verification Regulations of the People's Republic of China

JJG 795-2004 Verification Regulation of Withstanding Voltage Testers
JJG 795-1992 Verification Regulation of Withstanding Voltage Tester
JJG 1137-2017 Verification Regulation of High Voltage Relative Dielectric Loss and Capacitance Testers
JJG 843-2022 Leakage Current Tester
JJG 1188-2022 Medical Leakage Current Testers
JJG 795-2016 Withstanding Voltage Testers

Military Standard of the People's Republic of China-General Armament Department

GJB 360.27-1987 Test methods for electronic and electrical components Dielectric withstand voltage test

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 32192-2015 Withstanding voltage tester
GB/T 24480-2009 Landing doors fire resistance test—Methods for leakage rate,thermal insulation and radiation
GB/T 32191-2015 Leakage current tester
GB/T 38514-2020 Test methods for electrodeionization stacks
GB/T 38514-2020(英文版) Test methods for electrodeionization stacks

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB/J 5415-2005 Verfication regulation for withstanding voltage tester

未注明发布机构

ANSI/ANS 56.8-2020 Containment System Leakage Testing Requirements

Group Standards of the People's Republic of China

T/CPSS 1008-2020 Voltage Dip and Short Interruption Immunity Testing Method for Low Voltage Electrical Equipment

Professional Standard - Electricity

DL/T 1694.4-2017 Calibration specification for high voltage testing instruments. Part 4: Insulation oil voltage withstanding tester

工业和信息化部

JB/T 13998-2020 Requirements and test methods for permanence of copying on paper

Professional Standard - Electron

SJ 449-1973 Methods of measurement for voltage with standing test for high-voltage rectifier tubes

GM Europe

GME L-9D-2-1984 Durability Test and Leakage Test of Steering Boots
GME 7557-2007 Compression nut leak test
GME7557-2007 Dichtheitspr眉fung an Einpressmuttern Leak Test on Press Nuts English/German; This specification may be applied only for current projects incl. Global Epsilon e (37

CN-STDBOOK

图书 A-4743 Detection technology and application of withstand voltage tester

WRC - Welding Research Council

BULLETIN 468-2002 LEAK TESTING OF A RAISED FACE WELD NECK FLANGE
BULLETIN 431-1998 SUMMARY OF GASKET STEAM LEAKAGE TESTS: I) GASKET STEAM LEAKAGE TESTS ; II) LEAK TESTS CONDUCTED ON GRAPHITE GASKETS; III) LONG DURATION AIR AND STEAM SCREENING TESTS ON ELASTOMERIC SHEET GASKET MATERI

American Welding Society (AWS)

WRC 468:2002 Leak Testing of a Raised Face Weld Neck Flange

SAE - SAE International

SAE J1336-2021 Hydraulic Cylinder Leakage Test@ Recommended Practice

Society of Automotive Engineers (SAE)

SAE J1336-2014 Hydraulic Cylinder Leakage Test
SAE TS323-1-1985 TS323 Test for Electrical Connectors Dielectric Withstand

Korean Agency for Technology and Standards (KATS)

KS B 6730-1995 Pressure and leak tests for pressure vessels
KS C IEC 60512-4-1-2014 Connectors for electronic equipment－Tests and measurements－Part 4－1：Voltage stress tests－Test 4a：Voltage proof
KS K 0749-2021 Test method for compression behavior of prefabricated drain boards
KS C 2127-1996(2016) Testing method for proof-voltage testing of thin solid electrical insulating materials

HU-MSZT

MSZ KGST 2582-1980 Packaging material testing Water leakage testing under water pressure

SCC

DIN 51811:2017 Testing of lubricants - Testing of corrosiveness to copper of greases - Copper strip tarnish test
DIN 51811 E:2013 Draft Document - Testing of lubricants - Testing of corrosiveness to copper of greases - Copper strip tarnish test
AENOR UNE-EN 13184:2001 NON DESTRUCTIVE TESTING - LEAK TESTING - PRESSURE CHANGE METHOD.
DANSK DS/EN 60112:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
ANS 56.8-1987 Containment System Leakage Testing Requirements
CEI EN 60512-4-3:2003 Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels
CEI EN 60512-4-1:2003 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests Test 4a: Voltage proof
DIN EN IEC 60112:2022 Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 60112:2020); German version EN IEC 60112:2020
DANSK DS/EN 60512-4-3:2002 Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels
ANS 56.8-1994 Containment System Leakage Testing Requirements
ANS 56.8-1981 Containment System Leakage Testing Requirements
ANS 56.8-2002(R2016) Containment System Leakage Testing Requirements
BS EN 2591-B7:1994 Elements of electrical and optical connection. Test methods-Voltage proof test
AS C110:1951 Approval and test specification for earth leakage circuit-breakers (excluding earth leakage relays)
DIN EN IEC 61810-7-43 E:2022 Draft Document - All-or-nothing electrical relays - Tests and Measurements - Part 7-43: Proof tracking test (IEC 94/643/CD:2022); Text in German and English

American Society for Testing and Materials (ASTM)

ASTM F2786-16(2021) Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing)
ASTM D2043-94(2002) Standard Test Method for Silver Tarnishing by Paper
ASTM D2043-94(2007) Standard Test Method for Silver Tarnishing by Paper

VE-FONDONORMA

NORVEN 459-1974 Air and mechanical strength testing of electronic equipment and electronic components (Part 2: Testing, Ec test: drop and tumble testing of major equipment)
COVENIN 720-1974 Air and mechanical strength testing of electronic equipment and electronic components (Part 2: Tests, Test M: Low Atmospheric Pressure)
COVENIN 396-1973 Air and mechanical strength testing of electronic equipment and electronic components (Part 2: Test, b-test, damp heat test)

YU-JUS

JUS N.H9.101-1987 Current transformers. General reguirements and tests
JUS N.L4.204-1980 High-pressure mercwy vapour lamps. Reguirements and testing

International Federation of Trucks and Engines

NAVISTAR TMS 9545-2013 Cab Leakage - Testing Requirements

AENOR

UNE-EN 13184:2001 NON DESTRUCTIVE TESTING - LEAK TESTING - PRESSURE CHANGE METHOD.
UNE-EN 1518:1999 NON-DESTRUCTIVE TESTING. LEAK TESTING. CHARACTERIZATION OF MASS SPECTROMETER LEAK DETECTORS.
UNE-EN 13192:2002 Non destructive testing. Leak testing. Calibration of reference leaks for gases.
UNE-EN 2591-207:1996 AEROSPACE SERIES. ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION. TEST METHODS. PART 207: VOLTAGE PROOF TEST.
UNE-EN 60512-4-3:2002 Connectors for electronic equipment - Tests and measurements -- Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels.

CZ-CSN

CSN 34 5615-1984 Test methods for testing of resistance of electrical apparatus and accessories to heat and fire
CSN 65 6313-1959 Oil removal test

GSO

GSO IEC 60512-14-6:2015 Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing
BH GSO IEC 60512-4-1:2016 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof
GSO IEC 60512-4-1:2015 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof
OS GSO IEC 60512-4-1:2015 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof
OS GSO IEC 60512-4-3:2015 Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels
BH GSO IEC 60512-4-3:2016 Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels
GSO IEC 60512-4-3:2015 Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels
GSO IEC 60512-14-4:2015 Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof

Association Francaise de Normalisation

NF EN 60512-14-4:2006 Connecteurs pour équipements électroniques - Essais et mesures - Partie 14-4 : essais d'étanchéité - Essai 14d : immersion sous pression d'eau
NF EN 60512-14-5:2006 Connecteurs pour équipements électroniques - Essais et mesures - Partie 14-5 : essais d'étanchéité - Essai 14e : immersion à basse pression atmosphérique
NF EN 13160-5:2017 Leak detection systems - Part 5: requirements and methods of testing/evaluation of tank leak detection systems and pressure piping systems
NF EN 60512-4-3:2002 Connectors for electronic equipment - Tests and measurements - Part 4-3: dielectric stress tests - Test 4c: withstand voltage for pre-insulated crimping drums
NF EN IEC 60512-99-003:2023 Connectors for electrical and electronic equipment - Tests and measurements - Part 99-003: endurance test programs - Test 99c: test program for symmetrical single pair connectors during separation (uncoupling...

German Institute for Standardization

DIN EN 13184:2001-07 Non-destructive testing - Leak test - Pressure change method; German version EN 13184:2001
DIN EN 60512-4-1:2004-01 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof (IEC 60512-4-1:2003); German version EN 60512-4-1:2003 / Note: DIN IEC 60512-2 (1994-05) remains valid alongside this standard until ...

JP-JEC

JEC 0221-2007 INSTRUMENTS USED FOR MEASUREMENTS IN IMPULSE VOLTAGE AND CURRENT TESTS Requirement for instruments

Japanese Industrial Standards Committee (JISC)

JIS Z 2332:1993 Test method for leaks using the pressure change measurement
JIS Z 2332:2012 Leak testing method using pressure change
JIS T 8023:2006 Clothing and equipment for protection against heat -- Test method for convective heat resistance using a hot air circulating oven

ANS - American Nuclear Society

56.8-1987 CONTAINMENT SYSTEM LEAKAGE TESTING REQUIREMENTS
56.8-2002 Containment System Leakage Testing Requirements
56.8-1981 CONTAINMENT SYSTEM LEAKAGE TESTING REQUIREMENTS
56.8-1994 Containment System Leakage Testing Requirements

TR-TSE

TS 684-1969 IMPULSE TESTS ON CABLES AND THEIR ACCESSORIES

American Nuclear Society (ANS)

ANS 56.8-2020 Containment System Leakage Testing Requirements
ANS 56.8-2002 Containment System Leakage Testing Requirements

GM Global

GMW 14503-2012 Leak Test on Press Nuts Issue 2; English

RO-ASRO

STAS 5540/6-1977 TESTS OF BUTT WELDED JOINTS Flattening test

CO-ICONTEC

ICONTEC 2743-1990 Electronics. Transformer test procedures and test platforms, minimum requirements and related classifications

British Standards Institution (BSI)

BS EN 13160-2:2016 Leak detection systems. Requirements and test/assessment methods for pressure and vacuum systems
BS EN 13160-4:2016 Leak detection systems. Requirements and test/assessment methods for sensor based leak detection systems
BS EN 13160-7:2016 Leak detection systems. Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets

Lithuanian Standards Office

LST EN 13192-2002 Non destructive testing - Leak testing - Calibration of reference leaks for gases
LST EN 13192-2002/AC-2004 Non destructive testing - Leak testing - Calibration of reference leaks for gases

ECIA - Electronic Components Industry Association

EIA-364-78A-2002 TP-78A Cavity-To-Cavity Leakage Bonding Integrity Test Procedure for Electrical Connectors
364-78-1991 TP-78 Cavity-To-Cavity Leakage Bonding Integrity Test Procedure for Electrical Connectors

Danish Standards Foundation

DS/EN 13192:2002 Non destructive testing - Leak testing - Calibration of reference leaks for gases
DS/EN 60512-4-1:2003 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof
DS/EN 60512-4-3:2002 Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels

Electronic Components, Assemblies and Materials Association

ECA 186-4E-1978 Passive Electronic Component Parts, Test Methods for; Method 4: Dielectric Test (Withstanding Voltage)

DIN

DIN EN 60112:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 60112:2003); German version EN 60112:2003

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 4-1942 MEASUREMENT OF TEST VOLTAGE IN DIELECTRIC TESTS
IEEE 4-1940 MEASUREMENT OF TEST VOLTAGE IN DIELECTRIC TESTS

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0303-11-2010 Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 60112:2003 + A1:2009); German version EN 60112:2003 + A1:2009
VDE 0303-11-2016 Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 112/369/CD:2016)

Electronic Industrial Alliance (U.S.)

EIA RS-186-4E-1978 STANDARD TEST METHODS FOR PASSIVE ELECTRONIC CQMPONENT PARTS METHOD 4: DIELECTRIC TEST (WITHSTAND VOLTAGE)

Others: