iec gas release

iec gas release, Total:382 items.

The international standard classification for "iec gas release" includes: Wood-based panels in general , Salts , Inorganic chemicals in general , Textile fabrics , Electronic components in general , Fertilizers , Piping systems .

The Chinese standard classification for "iec gas release" includes: Artificial board , Inorganic salt , Inorganic chemicals in general , Basic standards and general methods , Special electronic technology material , Basic standards and general methods , Electronic element in general , Lubricating oil , Basic standards and general methods on chemical fertilizers , Marine valve fittings .

---

Professional Standard - Forestry

• LY/T 1612-2004 The climate chamber for determination of formaldehyde emission
• LY/T 1981-2011 Testing apparatus for formaldehyde emission by the gas analysis method

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

• GB/T 6626.3-1986 Test methods for the characteristics of getter-mercury dispenser--Test method for gas emission of getter mercury dispenser
• GB/T 23825-2022 Determination of formaldehyde release for wood-based panels and finishing products―Gas analysis method
• GB/T 27802-2011 Solid composition releasing chorine dioxide
• GB/T 25495-2010 Test methods for metal releasing characteristics of getters
• GB/T 33618-2017 Textiles―Test method for visible smoke release and heat release properties during combustion process
• GB/T 27803-2011 Analysis method for solid composition releasing chorine dioxide
• GB/T 23825-2009 Wood-based panels—Determination of formaldehyde release—Gas analysis method
• GB/Z 5169.32-2013 Fire Hazard Testing for Electric and Electronic Products - Part 32: Heat Release - Heat Release of Insulating Liquids
• GB/T 37757-2019 Determination of emission rate of volatile organic compounds from materials and components used in electrical and electronic products—Emission test chamber-gas chromatography mass spectrometry
• GB/T 33043-2016 Standard test method for determining formaldehyde concentrations in air and emission rates from wood products using a large chamber

Professional Standard - Agriculture

• 110兽药国家标准化学药品、中药卷第一册-2013 Part 1 Chemicals Jiuhua Luteinizing hormone releasing hormone A3 Luteinizing hormone releasing hormone A3 for injection
• 农业部公告第1945号 Luteinizing hormone releasing hormone A3
• 108兽药国家标准化学药品、中药卷第一册-2013 Part 1 Chemicals Jiuhua Luteinizing hormone releasing hormone A2 Luteinizing hormone releasing hormone A2 for injection
• NY/T 3040-2016 Slow-release fertilizers-Determination of nutrient release ratios
• SC 126-1984 Luteinizing hormone releasing hormone analogue for fish (LRH-A)

未注明发布机构

• CGA S-1.1-2025 Pressure Relief Device Standards - Part 1 - Cylinders for Compressed Gases
• CGA S-8-2018 Compressed Gas Association Part 3: Pressure relief devices for compressed gases in stationary storage vessels
• CGA S-1.3-2024 Compressed Gas Association Part 3: Pressure relief devices for compressed gases in stationary storage vessels
• CGA S-9-2018 Compressed Gas Association Part 3: Pressure relief devices for compressed gases in stationary storage vessels
• CGA S-1.2-2024 Standard for Pressure Relief Devices Part 2: Portable Containers for Compressed Gases
• VdS CEA 4009:2001-05 VdS Guidelines for Gas Fire Extinguishing Systems - Area Valves and their Release Mechanisms - Requirements and Testing Methods
• CGA S-7-2025 Standard Method for Selecting Pressure Relief Devices for Compressed Gas Mixtures in Cylinders
• CGA S-1.1-2019 Compressed Gas Association Part 3: Pressure relief devices for compressed gases in stationary storage vessels

Professional Standard - Petrochemical Industry

• SH/T 0308-1992 Determination Method for Air Release Value of Lubricating oils

Professional Standard - Chemical Industry

• HG/T 4216-2011 Fast methods to determine longevity and release rate of slow/controlled release fertilizers

Professional Standard - Commodity Inspection

• SN/T 2307-2009 Rapid determination of formaldehyde release of Wood-based panels and products - Gas analysis method

Hubei Provincial Standard of the People's Republic of China

• DB42/T 733-2011 IFN-γin vitro release assay

Shandong Provincial Standard of the People's Republic of China

• DB37/T 3827-2019 Technical regulations for field testing of nutrient release rate and release period of slow and controlled release fertilizers

Professional Standard-Ships

• CB/T 3843-2000 Pressure relief valve
• CB 3843-2000 Pressure relief valve

Group Standards of the People's Republic of China

• T/HZSM 0002-2023 Calibration method of air release value analyzers for lubricants
• T/HIS 013-2022 Pyroelectric infrared gas sensor

Professional Standard - Aquaculture

• SC 1012-1984 Luteinizing hormone releasing hormone analogue for fish (LRH-A)

International Association of Plumbing and Mechanical Officials

• IAPMO PS 101-2019 Suction relief valve
• IAPMO IGC 297-2013 Pressure relief valve

Danish Standards Foundation

• DS/EN 717-2/AC:2002 Wood-based panels - Determination of formaldehyde release - Part 2: Formaldehyde release by the gas analysis method
• DS/EN 717-2:1995 Wood-based panels - Determination of formaldehyde release - Part 2: Formaldehyde release by the gas analysis method
• DS/ISO 12460-3:2020 Wood-based panels – Determination of formaldehyde release – Part 3: Gas analysis method
• DANSK DS/ISO 12460-3:2020 Wood-based panels – Determination of formaldehyde release – Part 3: Gas analysis method
• DANSK DS/ISO 17871:2020 Gas cylinders – Quick-release cylinder valves – Specification and type testing
• DANSK DS/EN ISO 17871/A1:2015 Gas cylinders - Quick-release cylinder valves - Specification and type testing
• DS/EN ISO 12460-3:2020 Wood-based panels – Determination of formaldehyde release – Part 3: Gas analysis method (ISO 12460-3:2020)
• DANSK DS/ISO/TS 12025:2021 Nanomaterials – Quantification of nano-object release from powders by generation of aerosols
• DS/ISO/TS 12025:2012 Nanomaterials - Quantification of nano-object release from powders by generation of aerosols
• DS/ISO/TS 12025:2021 Nanomaterials – Quantification of nano-object release from powders by generation of aerosols
• DANSK DS/EN ISO 12460-3:2020 Wood-based panels – Determination of formaldehyde release – Part 3: Gas analysis method (ISO 12460-3:2020)
• DANSK DS/CEN/TS 16516:2013 Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air
• DANSK DS/EN ISO 17871:2020 Gas cylinders – Quick-release cylinder valves – Specification and type testing (ISO 17871:2020)
• DANSK DS/EN 16516:2017 Construction products: Assessment of release of dangerous substances – Determination of emissions into indoor air
• DS/ISO 5660-1:2003 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1: Heat release rate (cone calorimeter method)
• DANSK DS/EN 16516+A1:2020 Construction products: Assessment of release of dangerous substances – Determination of emissions into indoor air

British Standards Institution (BSI)

• BS EN 717-2:1995(2002) Wood - based panels — Determination of formaldehyde release — Part 2 : Formaldehyde release by the gas analysis method
• BS EN 717-2:1995 Wood-based panels - Determination of formaldehyde release - Formaldehyde release by the gas analysis method
• BS EN ISO 12460-3:2023 Wood-based panels. Determination of formaldehyde release - Gas analysis method
• 06/30145521 DC IEC 60695-8-3. Fire hazard testing. Part 8-3. Heat release. Heat release of insulating liquids used in electrotechnical products
• BS EN ISO 12460-3:2015 Wood-based panels. Determination of formaldehyde release. Gas analysis method
• BS EN 1084:1995 Plywood - Formaldehyde release classes determined by the gas analysis method
• BS EN ISO 12460-3:2020 Wood-based panels. Determination of formaldehyde release. Gas analysis method
• BS EN 1084:1995(2000) Plywood — Formaldehyde release classes determined by the gas analysis method
• 06/30078205 DC IEC 62302. Equipment for sampling and monitoring radioactive noble gases
• 24/30500155 DC BS EN IEC 63585 Interpretation of Dissolved Gas Analysis in natural and synthetic esters
• BS EN ISO 17871:2015+A1:2018 Gas cylinders. Quick-release cylinder valves. Specification and type testing
• 08/30180703 DC BS EN 60754-1. Test on gases evolved during combustion of materials from cables. Part 1. Determination of the halogen acid gas content
• BS ISO 16183:2003 Heavy duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
• BS EN ISO 17871:2020+A1:2024 Gas cylinders. Quick-release cylinder valves. Specification and type testing
• BS EN ISO 17871:2020 Gas cylinders. Quick-release cylinder valves. Specification and type testing
• BS EN ISO 17871:2015 Gas cylinders. Quick-release cylinder valves. Specification and type testing
• 06/30155271 DC ISO 12460-3. Wood-based panels. Determination of formaldehyde release. Part 3. Gas analysis method
• BS PD ISO/TS 12025:2012 Nanomaterials. Quantification of nano-object release from powders by generation of aerosols
• PD CEN ISO/TS 12025:2021 Nanomaterials - Quantification of nano-object release from powders by generation of aerosols (ISO/TS 12025:2021)
• 11/30252234 DC BS EN 717-2. Wood-based panels. Determination of formaldehyde release. Part 2. Gas analysis method
• BS DD ENV 717-1:1999 Wood-based panels. Determination of formaldehyde release-Formaldehyde emission by the chamber method
• BS EN ISO 14184-2:1998 Textiles. Determination of formaldehyde-Released formaldehyde (vapour absorption method)
• BS 1660-3:1953 Machine tapers. Quick release tapers and gauges for quick release tapers
• 19/30382831 DC BS EN ISO 12460-3. Wood-based panels. Determination of formaldehyde release. Part 3. Gas analysis method
• BS PD CEN ISO/TS 12025:2021 Nanomaterials. Quantification of nano-object release from powders by generation of aerosols
• BS ISO 16183:2002(2003) Heavy duty engines — Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
• BS EN 16516:2017 Construction products: Assessment of release of dangerous substances. Determination of emissions into indoor air
• BS EN 16516:2017+A1:2020 Construction products: Assessment of release of dangerous substances. Determination of emissions into indoor air
• 19/30399846 DC BS EN ISO 17871. Gas cylinders. Quick-release cylinder valves. Specification and type testing
• BS ISO 16183:2002 Heavy duty engines. Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
• 06/30145513 DC IEC 60695-8-1. Fire hazard testing. Part 8-1. Heat release. General guidance
• 12/30268842 DC PD IEC/TR 62725. Analysis of quantification methodologies for greenhouse gas emissions for electrical and electronic products and systems
• BS PD CEN/TS 16516:2013 Construction products. Assessment of release of dangerous substances. Determination of emissions into indoor air
• BS EN 13266:2001(2011) Slow-release fertilizers - Determination of the release of the nutrients - Method for coated fertilizers
• BS EN 13266:2001 Determination of Nutrient Release Performance of Slow Release Fertilizers Using Coated Fertilizer Method
• 23/30467888 DC BS ISO 17871 AMD 1. Gas cylinders. Quick-release cylinder valves. Specification and type testing
• BS EN 13266:2002 Slow-release fertilizers - Determination of the release of the nutrients - Method for coated fertilizers

Ente Nazionale Italiano di Unificazione

• UNI EN 717-2:1996 Wood-based panels. Determination of formaldehyde release. Formaldehyde release by the gas analysis method.
• EC 1-2004 UNI EN 717-2:1996 Wood-based panels. Determination ofood-b formaldehyde release. Formaldehyde release by the gas analysis method.
• UNI EN 14513:2005 Transportable gas cylinders - Bursting disc pressure relief devices (excluding acetylene gas cylinders)
• UNI EN ISO 12460-3:2015 Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method
• UNI EN ISO 12460-3:2021 Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method
• EC 1-2004 UNI ENV 717-1:2000 Wood-based panels - Determination formaldehyde release - Formaldehyde emission by the chamber method
• UNI EN ISO 12460-3:2023 Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method
• UNI EN 1084:1997 Plywood. Formaldehyde release classes determined by the gas analysis method.
• UNI EN 717-3:1997 Wood-based panels.Determination of formaldehyde release. Formaldehyde release by the flask method.
• UNI EN ISO 17871:2018 Gas cylinders - Quick-release cylinder valves - Specification and type testing
• UNI EN ISO 17871:2015 Gas cylinders - Quick-release cylinder valves - Specification and type testing
• UNI EN ISO 17871:2024 Gas cylinders - Quick-release cylinder valves - Specification and type testing
• UNI EN ISO 17871:2020 Gas cylinders - Quick-release cylinder valves - Specification and type testing
• UNI CEN ISO/TS 12025:2021 Nanomaterials - Quantification of nano-object release from powders by generation of aerosols
• UNI ISO 6264:2007 Hydraulic fluid power - Pressure-relief valves - Mounting surfaces
• UNI ENV 717-1:2000 Wood-based panels - Determination of formaldehyde release - Formaldehyde emission by the chamber method
• UNI EN 12149:1999 Wallcoverings in roll form - Determination of migration of heavy metals and certain other elements, of vinyl chloride monomer and of formaldehyde release
• UNI CEN ISO/TS 12025:2015 Nanomaterials - Quantification of nano-object release from powders by generation of aerosols
• UNI 9216:1988 Wood-based panels. Determination of formaldehyde emission. Method called for emission in a vessel
• UNI EN 16516:2020 Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air

Lithuanian Standards Office

• LST EN 717-2-2000/AC-2003 Wood-based panels - Determination of formaldehyde release - Part 2: Formaldehyde release by the gas analysis method
• LST EN 717-2-2000 Wood-based panels - Determination of formaldehyde release - Part 2: Formaldehyde release by the gas analysis method
• LST EN 60599-2002/A1-2007 Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis (IEC 60599:1999/A1:2007)
• LST EN ISO 12460-3:2020 Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO 12460-3:2020)
• LST EN 60599-2001 Mineral oil-impregnated electrical equipment in service. Guide to the interpretation of dissolved and free gases analysis (IEC 60599:1999)
• LST EN ISO 17871:2020 Gas cylinders - Quick-release cylinder valves - Specification and type testing (ISO 17871:2020)
• LST EN 60761-3-2005 Equipment for continuous monitoring radioactivity in gaseous effluents. Part 3: Specific requirements for radioactive noble gas monitors (IEC 60761-3:2002)

Spanish Association for Standardization (UNE)

• AENOR UNE-EN 717-2:1995 Wood based panels. Determination of formaldehyde emission. Part 2: formaldehyde emission by gas analysis method.
• UNE-EN 717-2:1995 WOOD-BASED PANELS. DETERMINATION OF FORMALDEHYDE RELEASE. PART 2: FORMALDEHYDE RELEASE BY THE GAS ANALYSIS METHOD
• UNE 77-209-1989 Release of gas. Continuous monitor feature for transparency
• UNE 77-210-1989 Release of gas. Continuous Monitor Characteristics of Sulfur Dioxide
• AENOR UNE-EN 1084:1996 Plywood boards. Formaldehyde emission classes determined according to the gas analysis method.
• UNE-EN ISO 12460-3:2021 Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO 12460-3:2020)
• UNE 84-064-1987 Analysis of the gas release stages of acidic oils and metals from cosmetic raw materials
• AENOR UNE-EN 60754-1:2014 Test of gases released during the combustion of materials from cables. Part 1: Determination of the content of acid halogen gases.
• UNE-EN ISO 17871:2021 Gas cylinders - Quick-release cylinder valves - Specification and type testing (ISO 17871:2020)
• UNE-EN 60599:2000/A1:2007 Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis (IEC 60599:1999/A1:2007).
• UNE-EN ISO 12460-3:2016 Determination of formaldehyde emission from wood-based panels - Part 3: Gas analysis method (ISO 12460-3:2015)
• UNE-CEN ISO/TS 12025:2021 Nanomaterials - Quantification of nano-object release from powders by generation of aerosols (ISO/TS 12025:2021) (Endorsed by Asociación Española de Normalización in July of 2021.)
• AENOR UNE-EN ISO 12460-3:2021 Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO 12460-3:2020)
• UNE-EN 16516:2018+A1:2021 Construction products: Assessment of release of dangerous substances - Determination of emissions of into indoor air
• AENOR UNE-EN ISO 17871:2021 Gas cylinders - Quick-release cylinder valves - Specification and type testing (ISO 17871:2020)

RO-ASRO

• STAS 10956/2-1977 Metal powders ALUMINIUM POWDERS Determination of released gas volume
• STAS SR EN 717-2-1995 Wood-based panels - Determinations of formaldehyde release. Part 2: Formaldehyde release by the gas analysis method
• STAS SR EN 717-2/C1-1996 Wood - based panels - Determinations of formaldehyde release. Part 2: Formaldehyde release by the gas analysis method
• STAS 11889-1980 ONE BUCKET LOADER WITH ROTARY RELEASE Typification
• STAS 11888-1980 ONE BUCKET LOADER WITH FRONT RELEASE Typification

German Institute for Standardization

• DIN EN 717-2 E:2011 Draft Document - Wood-based panels - Determination of formaldehyde release - Part 2: Formaldehyde release by the gas analysis method; German version prEN 717-2:2011
• DIN EN 717-2:1995 Wood-based panels - Determination of formaldehyde release - Part 2: Formaldehyde release by the gas analysis method; German version EN 717-2:1994
• DIN SPEC 14411:2013-07 Extinguishing aerosol dispenser
• DIN EN 717-2 E:2011-11 Wood-based panels - Determination of formaldehyde release - Part 2: Formaldehyde release by the gas analysis method
• DIN ISO/TS 12025 DIN SPEC 52406:2013-09 Quantification of aerosol release of nanoparticles from nanomaterial powders
• DIN EN IEC 60599:2023-08 Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis (IEC 60599:2022); German version EN IEC 60599:2022
• DIN EN 1084:1995 Plywood — Formaldehyde release classes determined by the gas analysis method
• DIN EN ISO 12460-3:2021-02 Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO 12460-3:2020); German version EN ISO 12460-3:2020 / Note: To be amended by DIN EN ISO 12460-3/A1 (2022-10).
• DIN EN ISO 12460-3:2023-06 Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO/FDIS 12460-3:2023); German and English version prEN ISO 12460-3:2023 / Note: Date of issue 2023-05-05*Intended as replacement for DIN EN ISO 12460-3 (2021-02).
• DIN EN 14129:2005-01 LPG cylinder pressure relief valve
• DIN EN 717-2:1995-01 Wood-based panel products -Determination of formaldehyde release by the gas analysis method
• DIN EN ISO 17871:2020-11 Gas cylinders - Quick-release cylinder valves - Specification and type testing (ISO 17871:2020); German version EN ISO 17871:2020
• DIN EN ISO 12460-3 E:2013-11 Determination of formaldehyde release from artificial panels Part 3: Gas analysis method (draft)
• DIN EN ISO 12460-3 E:2019-06 Determination of formaldehyde release from artificial panels Part 3: Gas analysis method (draft)
• DIN EN 60754-1:2021-02 Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content (IEC 60754-1:2011 + corrigendum Nov. 2013 + A1:2019); German version EN 60754-1:2014 + A1:2020
• DIN EN 16516:2018-01 Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air
• DIN V 51897:2000 Gas analysis - Definitions and explanations
• DIN V 51897:2000-11 Gas analysis - Definitions and explanations
• DIN EN 60599:1999 Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis (IEC 60599:1999); German version EN 60599:1999
• DIN EN IEC 60599:2023 Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis (IEC 60599:2022); German version EN IEC 60599:2022
• DIN EN 16516:2018 Construction products – assessment of the release of hazardous substances – determination of emissions into indoor air
• DIN EN 16516:2020-10 Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air; German version EN 16516:2017+A1:2020
• DIN ISO/TS 12025:2013 Nanomaterials - Quantification of nano-object release from powders by generation of aerosols (ISO/TS 12025:2012)
• DIN CEN ISO/TS 12025:2015*DIN SPEC 52406:2015 Nanomaterials - Quantification of nano-object release from powders by generation of aerosols
• DIN EN 16516 A1 E:2019-06 Building products: Evaluating the release of hazardous substances into indoor air
• DIN EN 14071:2005-02 Pressure relief valves for LPG tanks - Ancillary equipment
• DIN EN 16516/A1:2019-06 Draft Document - Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air; German and English version EN 16516:2017/prA1:2019
• DIN EN ISO 17871:2015-12 Gas cylinders - Quick-release cylinder valves - Specification and type testing (ISO 17871:2015)
• DIN EN ISO 12460-3:2016-03 Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO 12460-3:2015)
• DIN EN IEC 61810-7-30 E:2022-10 Draft Document - All-or-nothing electrical relays - Tests and Measurements - Part 7-30: Contact sticking (delayed release) (IEC 94/626/CD:2021); Text in German and English
• DIN EN 60599:2016-10 Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis (IEC 60599:2015); German version EN 60599:2016
• DIN EN IEC 61810-7-30 E:2022 Draft Document - All-or-nothing electrical relays - Tests and Measurements - Part 7-30: Contact sticking (delayed release) (IEC 94/626/CD:2021); Text in German and English

Standards Norway

• NS-EN 717-2:1994 Wood-based panels — Determination of formaldehyde release — Part 2: Formaldehyde release by the gas analysis method
• NS 3657-1993 Concrete testing. Determination of heat release
• NS-EN 1084:1995 Plywood — Formaldehyde release classes determined by the gas analysis method
• NS-EN ISO 12460-3:2020 Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO 12460-3:2020)
• NS-EN ISO 12460-3:2015 Wood-based panels — Determination of formaldehyde release — Part 3: Gas analysis method (ISO 12460-3:2015)
• SN-CEN/TS 16516:2013 Construction products — Assessment of release of dangerous substances — Determination of emissions into indoor air
• NS-EN ISO 17871:2015 Gas cylinders — Quick-release cylinder valves — Specification and type testing (ISO 17871:2015)
• NS-EN ISO 17871:2020 Gas cylinders - Quick-release cylinder valves - Specification and type testing (ISO 17871:2020)
• NS-EN 16516:2017 Construction products: Assessment of release of dangerous substances — Determination of emissions into indoor air
• NS-EN 16516:2017+A1:2020 Construction products: Assessment of release of dangerous substances — Determination of emissions into indoor air
• NS-EN 13953:2003 Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)

Gosstandart of Russia

• GOST IEC 60754-1-2011 Tests of materials from cables during combustion. Determination of the amount of evolved halogen acid gas
• GOST 22466.4-1982 Gaseons discharge continuous sources of high-intensity optical radiation. Methods for measuring electrical parameters
• GOST 32155-2013 Wood-based panels and plywood. Determination of formaldehyde release by the gas analysis method
• GOST R 53867-2010 Wood-based panels and plywood. Determination of formaldehyde release by the gas analysis method
• GOST IEC 60754-2-2011 Tests of materials from cables during combustion. Determination of degree of evolved gases acidity by measuring pH and conductivity
• GOST R ISO 16183-2013 Heavy duty engines. Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
• GOST ISO 9120-2015 Petroleum oils. Determination of air-release properties. Impinger method
• GOST R 8.923-2016 State system for ensuring the uniformity of measurements. Gas generators vapor ethanol in the air. Verification procedure

Japanese Industrial Standards Committee (JISC)

• JIS K 7217:1983 Analytical method for determining gases evolved from burning plastics

YU-JUS

• JUS N.C0.085-1989 Test on gases evolved during combustion of electric cables. Determinstion of the amount of halogen acidgas evolved during the combustion of polvmeric materials taken from cables
• JUS D.C8.119-1987 Testing ofparticleboards; determination of formaldehyde amission by gasanalysis
• JUS M.C1.530-1997 ELECTRO-HYDRAULIC BREAKER Pushing force, stroke and marking

Korean Agency for Technology and Standards (KATS)

• KS M 3047-2018(2023) Methods for the analysis of evolved gases concentration by burning of plastics
• KS M 3047-2018 Methods for the analysis of evolved gases concentration by burning of plastics
• KS K 0610-2022 Test method for soil release: Oily stain release method
• KS K 0610-1986 Test method for soil release: Oily stain release method
• KS R ISO 16183:2009 Heavy duty engines-Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
• KS B ISO 11419:2004 Agricultural irrigation equipment-Float type air release valves
• KS B ISO 11419:2014 Agricultural irrigation equipment — Float type air release valvess
• KS R ISO 16183-2009(2019) Heavy duty engines－Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
• KS R ISO 16183-2009(2024) Heavy duty engines — Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
• KS I ISO 16000-10:2004 Indoor air － Part 10: Determination of the emission of volatile organic compounds － Emission test cell method
• KS I ISO 16000-9:2014 Indoor air — Part 9: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test chamber method
• KS R ISO 16183-2024 Heavy duty engines — Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
• KS R ISO 16183-2019 Heavy duty engines－Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
• KS I ISO 16000-9:2004 Indoor air-Part 9:Determination of the emission of volatile organic compounds-Emission test chamber method

Society of Automotive Engineers (SAE)

• SAE AIR6942-2025 Nitrogen Absorption/Desorption (Gas Dissolution) in Aircraft Shock Absorbers
• SAE AS8712-2013 Valve; Air Relief, Low Pressure
• SAE AS34021E CONNECTOR, RECEPTACLE, ELECTRIC, BOX MOUNTING, FRONT RELEASE, CRIMP CONTACT, AN TYPE
• SAE AS34021D CONNECTOR, RECEPTACLE, ELECTRIC, BOX MOUNTING, FRONT RELEASE, CRIMP CONTACT, AN TYPE
• SAE ARP1796A-2007 (R) Engine Bleed Air Systems for Aircraft
• SAE AS34521A Connector, Receptacle, Electric, Box Mounting, Rear Release, Crimp Contact, AN Type With
• SAE AS34521 Connector, Receptacle, Electric, Box Mounting, Rear Release, Crimp Contact, An Type With
• SAE AS3303-1-1950 AS3303 Release Nut
• SAE AS3303-1 AS3303 Release Nut
• SAE ARP868C-2001 Method-Pressure Drop Tests for Fuel System Components
• SAE AS34061-2003 CONNECTORS, PLUG, ELECTRIC, FRONT RELEASE, CRIMP CONTACT, AN TYPE
• SAE AS34561A-2021 CONNECTORS, PLUG, ELECTRICAL, REAR RELEASE, CRIMP CONTACT, AN TYPE
• SAE AS34561-2004 CONNECTORS, PLUG, ELECTRICAL, REAR RELEASE, CRIMP CONTACT, AN TYPE
• SAE AS34561A-2011 CONNECTORS, PLUG, ELECTRICAL, REAR RELEASE, CRIMP CONTACT, AN TYPE
• SAE ARP1322B-2014 Overpressurization Release Devices
• SAE ARP1322-1975 Overpressurization Release Devices
• SAE ARP1322B Overpressurization Release Devices
• SAE ARP1322C-2018 Overpressurization Release Devices
• SAE ARP1322 Overpressurization Release Devices
• SAE ARP1322C Overpressurization Release Devices
• SAE ARP1322A Overpressurization Release Devices
• SAE ARP1322A-1998 Overpressurization Release Devices
• SAE ARP1322A-2007 Overpressurization Release Devices
• SAE ARP1322B-2009 Overpressurization Release Devices

National Fire Protection Association (NFPA)

• NFPA 329-2020 NFPA Recommended Practice for Handling Releases of Flammable and Combustible Liquids and Gases

Swedish Institute for Standards

• SIS-ISO/TS 20048-1:2020 Solid biofuels - Determination of off-gassing and oxygen depletion characteristics - Part 1: Laboratory method for the determination of off-gassing and oxygen depletion using closed containers (ISO/TS 20048-1:2020)
• SS-EN ISO 12460-3:2024 Wood-based panels — Determination of formaldehyde release — Part 3: Gas analysis method (ISO 12460-3:2023, IDT)
• SS-ISO 20041-1:2022 Tritium and carbon-14 activity in gaseous effluents and gas discharges of nuclear installations — Part 1: Sampling of tritium and carbon-14 (ISO 20041-1:2022, IDT)
• SS-EN ISO 17871:2015 Gas cylinders - Quick-release cylinder valves - Specification and type testing (ISO 17871:2015)
• SS-EN ISO 17871:2020 Gas cylinders - Quick-release cylinder valves - Specification and type testing (ISO 17871:2020)
• SS-EN 16516:2017+A1:2020 Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air
• SIS-ISO/TS 12025:2012 Nanomaterials - Quantification of nano-object release from powders by generation of aerosols (ISO/TS 12025:2012, IDT)
• SIS-CEN ISO/TS 12025:2015 Nanomaterials - Quantification of nano-object release from powders by generation of aerosols (ISO/TS 12025:2012)
• SS-ISO 16183:2003 Heavy-duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions

European Committee for Standardization (CEN)

• EN 1084:1995 Plywood - Formaldehyde Release Classes Determined by the Gas Analysis Method
• prEN 717-2-1992 Wood-based panels; determination of formaldehyde emission; part 2: formaldehyde release by the gas analysis method
• EN ISO/TS 12025:2015 Nanomaterials - Quantification of nano-object release from powders by generation of aerosols
• EN ISO 12460-3:2020 Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO 12460-3:2020)
• PREN 717-2-2011 Wood-based panels - Determination of formaldehyde release - Part 2: Gas analysis method
• EN 717-2:1994 Wood-based panels - Determination of formaldehyde release - Part 2: Formaldehyde release by the gas analysis method (Incorporating Corrigendum July 2002)
• EN ISO 12460-3:2015 Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method
• CEN ISO/TS 12025:2015 Nanomaterials - Quantification of nano-object release from powders by generation of aerosols (ISO/TS 12025:2012)
• EN 14091:2002 Space Product Assurance - Thermal Vacuum Outgassing Test for the Screening of Space Materials
• EN ISO 12460-3:2023 Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO 12460-3:2023)
• prEN ISO 12460-3 Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO/FDIS 12460-3:2023)

Association Francaise de Normalisation

• NF B51-272-2:1995 Wood-based panels. Determination of formaldehyde release. Part 2: formaldehyde release by the gas analysis method
• NF B51-273-3*NF EN ISO 12460-3:2023 Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method
• NF EN ISO 12460-3:2023 Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method
• NF C32-074:1993 TEST ON GASES EVOLVED DURING THE COMBUSTION OF MATERIALS FROM CABLES. DETERMINATION OF DEGREE OF ACIDITY (CORROSIVITY) OF GASES BY MEASURING PH AND CONDUCTIVITY.
• NF EN 60754-1/A1:2020 Test on gases emitted during the combustion of materials taken from cables - Part 1: determination of the quantity of halogenated acid gas
• NF EN ISO 12460-3:2020 Wood-based panels - Determination of formaldehyde release - Part 3: gas analysis method
• NF M60-823-0:2022 Nuclear energy - Radioactivity measurement in gaseous effluents - Determination of noble gas activity in gaseous effluents - Part 0 : calculation of noble gas released activities
• NF E29-131*NF EN ISO 17871:2020 Gas cylinders - Quick-release cylinder valves - Specification and type testing
• NF E29-131:2015 Gas cylinders - Quick-release cylinder valves - Specification and type testing
• XP CEN ISO/TS 12025:2021 Nanomaterials - Quantification of the release of nano-objects from powders by aerosol production
• XP T16-202*XP CEN ISO/TS 12025:2021 Nanomaterials - Quantification of nano-object release from powders by generation of aerosols
• NF U42-605*NF EN 13266:2002 Slow-release fertilizers - Determination of the rate of release of nutrients - Method for coated fertilizers
• NF E29-131/A1*NF EN ISO 17871/A1:2024 Gas cylinders - Quick-release cylinder valves - Specification and type testing - Amendment 1
• NF EN ISO 17871/A1:2024 Gas cylinders - Quick-release cylinder valves - Specification and type testing - Amendment 1

SCC

• ADS AS3351 Valve Body (for Thermal Relief Valve - AS3350)
• ADS AS2820 Assembly of Front Casing (Harness Release Gear)

Aerospace Industries Association/ANSI Aerospace Standards

• AIA/NAS NASM25087-2011 SCREW, EXTERNALLY RELIEVED BODY

Austrian Standards

• ONORM E 3654-1993 Test on gases evolved during the combustion of materials from cables - Determination of degree of acidity (corrosivity) of gases by measuring pH and conductivity (IEC 754-2:1991, modified)
• OENORM EN ISO 12460-3:2021 Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO 12460-3:2020)

American Water Works Association (AWWA)

• AWWA M51-2001 Air-Release, Air/Vacuum,& Combination Air Valves
• AWWA M51-2016 Air-Valves: Air-Release, Air/Vacuum and Combination (Second Edition)
• AWWA M51 Air Valves: Air Release, Air/Vacuum, and Combination, Second Edition
• AWWA JAW60137 Pressure Surges in Pipeline Systems Resulting from Air Releases
• AWWA C512-2007 Air-Release, Air/Vacuum, and Combination Air Valves for Waterworks Service

American Society of Mechanical Engineers (ASME)

• ASME B133.8-2011 Gas Turbine Installation Sound Emissions
• ASME B133.8-1977 Gas Turbine Installation Sound Emissions
• ASME B133.8-2011(R2017) Gas Turbine Installation Sound Emissions

Military Standards (MIL-STD)

• MIL MIL-PRF-9050H-2020 Valves, Oxygen, Pressure Relief, Aircraft
• MIL MIL-PRF-9050G-2009 Valves, Oxygen, Pressure Relief, Aircraft

International Organization for Standardization (ISO)

• ISO 12460-3:2020 Wood-based panels — Determination of formaldehyde release — Part 3: Gas analysis method
• ISO 12460-3:2008 Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method
• ISO 12460-3:2015 Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method
• ISO/FDIS 12460-3:2023 Wood-based panels — Determination of formaldehyde release — Part 3: Gas analysis method
• ISO 12460-3:2023 Wood-based panels — Determination of formaldehyde release — Part 3: Gas analysis method
• ISO 16183:2002 Heavy-duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
• ISO 11419:1997 Agricultural irrigation equipment - Float type air release valves
• ISO 10294-4:2001/Amd 1:2014 Fire resistance tests - Fire dampers for air distribution systems - Part 4: Test of thermal release mechanism - Amendment 1: Specific performance requirement for thermal release mechanism based upon performance of thermal release mechanism used in ISO 102
• ISO 17871:2020/Amd 1:2024 Gas cylinders — Quick-release cylinder valves — Specification and type testing — Amendment 1
• ISO 16183 Heavy duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
• ISO 17871:2020/FDAmd 1:2023 Gas cylinders — Quick-release cylinder valves — Specification and type testing — Amendment 1
• ISO 17871:2020/DAmd 1:2023 Gas cylinders — Quick-release cylinder valves — Specification and type testing — Amendment 1
• ISO 17871:2015/Amd 1:2018 Gas cylinders — Quick-release cylinder valves — Specification and type testing — Amendment 1
• ISO 16000-10:2006 Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method
• ISO 16000-9:2006 Indoor air - Part 9: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test chamber method

American National Standards Institute （ANSI)

• ANSI/ASME B133.8-2011 Gas Tubine Installation Sound Emissions
• ANSI/ANS 5.10-1998(2013) Airborne Release Fractions at Non-Reactor Nuclear Facilities
• ANSI/ANS 5.10-1998 Airborne Release Fractions at Non-Reactor Nuclear Facilities
• ANSI N13.56-2012 Sampling and Monitoring Releases of Airborne Radioactivity in the Workplace of Nuclear Facilities
• ANSI N13.1-2011 Sampling and Monitoring Releases of Airborne Radioactive Substances from the Stacks and Ducts of Nuclear Facilities
• ANSI/AWWA C512-2015 Air-Release@ Air/Vacuum@ and Combination Air Valves for Water and Wastewater Service

Indonesia Standards

• SNI ISO 12460-3:2010 Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method
• SNI ISO/TS 12025:2012 Material nano – Quantification of nano-object release from powders generated from aerosols (ISO/TS 12025:2012, IDT)

Association of German Mechanical Engineers

• VDI 3783 BLATT 2-1990 Environmental meteorology; dispersion of accident-related releases of heavy gases; safety analysis
• VDI 3490 Blatt 1-1980 Measurement of gases; calibration gas mixtures; terms and legends

Compressed Gas Association (U.S.)

• CGA S-1.3-2020 Standard for Pressure Relief Devices Part 3 Compressed Gas Storage Containers
• CGA S-1.2-2005 PRESSURE RELIEF DEVICE STANDARDS PART 2 - CARGO AND PORTABLE TANKS FOR COMPRESSED GASES
• CGA S-1.2-2019 PRESSURE RELIEF DEVICE STANDARDS PART 2 - CARGO AND PORTABLE TANKS FOR COMPRESSED GASES
• CGA P-69-2018 Guidelines for Emergency Response to Cryogenic Liquid Releases
• CGA S-1.3-2005 PRESSURE RELIEF DEVICE STANDARDS PART 3 - STATIONARY STORAGE CONTAINERS FOR COMPRESSED GASES
• CGA S-7-2018 Compressed Gas Association (CGA) S-7 2018 Sixth Edition: Methods for Selecting Pressure Relief Devices for Compressed Gas Mixtures

GCC Standardization Organization

• GSO ISO 12460-3:2015 Wood-based panels -- Determination of formaldehyde release -- Part 3: Gas analysis method
• GSO ISO 2861:2015 Vacuum technology -- Dimensions of clamped-type quick-release couplings
• GSO ISO/TS 12025:2017 Nanomaterials -- Quantification of nano-object release from powders by generation of aerosols
• BH GSO ISO 12460-1:2024 Wood-based panels – Determination of formaldehyde release - Part 1: Formaldehyde emission by the 1-cubic-meter chamber method
• OS GSO EN 1593:2024 Non-destructive testing - Leak testing - Bubble emission techniques
• BH GSO ISO/TS 12025:2024 Nanomaterials — Quantification of nano-object release from powders by generation of aerosols

PT-IPQ

• NP EN 1084-2001 Plywood Formaldehyde release classes determined by the gas analysis method

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

• TCVN 7421-2:2013 Determination of formaldehyde in textiles - Part 2: Release of formaldehyde (gas absorption method)

Kingdom of Bahrain Testing and Metrology Directorate

• BH GSO ISO 12460-3:2017 Wood-based panels -- Determination of formaldehyde release -- Part 3: Gas analysis method
• BH GSO ISO 16183:2016 Heavy duty engines -- Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test condition

U.S. Air Force

• AIR FORCE MIL-C-9495 A (2)-1958 COMPUTER, PARADROP, AIR RELEASE POINT, TYPE MB-3
• AIR FORCE MIL-C-9495 A-1955 COMPUTER, PARADROP, AIR RELEASE POINT, TYPE MB-3

OVE Austrian Electrotechnical Association

• OVE EN IEC 60599:2021 Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis (IEC 10/1133/CDV) (english version)

BELST

• STB 17.08.05-01-2016 Environmental Protection and Nature Use. Air. Methods for determination of atmospheric humidity of gas emissions, released into the atmosphere from stationary sources of pollution
• STB 17.08.05-02-2016 Environmental Protection and Nature Use. Air. Methods for determination of velocity and flowrate of gas emissions, released into the atmosphere from stationary sources of pollution
• STB 17.08.05-03-2016 Environmental Protection and Nature Use. Air. Methods for determination of pressure and temperature of gas emissions, released into the atmosphere from stationary sources of pollution

Australian/New Zealand Standard (AU-AS/NZS)

• AS/NZS IEC 60079.10.1:2022/Sup 1:2022 Explosive atmospheres — Classification of areas — Explosive gas atmospheres — Commentary (Supplement 1 to AS/NZS IEC 60079.10.1:2022)

United States Navy

• NAVY MIL-R-25410 G-1991 REGULATORS, OXYGEN, DILUTER-DEMAND, AUTOMATIC-PRESSURE BREATHING
• NAVY MIL-R-25410 G NOTICE 1-1997 REGULATORS, OXYGEN, DILUTER-DEMAND, AUTOMATIC-PRESSURE BREATHING
• NAVY MS16036 REV C-1961 BELT - AIRCRAFT SAFETY, PILOT'S AUTOMATIC RELEASE, CARTRIDGE OPERATED
• NAVY MS16036 REV C NOTICE 1-1996 BELT - AIRCRAFT SAFETY, PILOT'S AUTOMATIC RELEASE, CARTRIDGE OPERATED
• NAVY MS3406 REV H NOTICE 2-1996 CONNECTORS, PLUG, ELECTRIC, FRONT RELEASE, CRIMP CONTACT, AN TYPE

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

• IPC TM-650 2.2.12.2-1989 Weight and Thickness of Copper Foils with Releasable Carriers

Association for Electrical, Electronic & Information Technologies (VDE)

• VDE 0472-813-1994*DIN VDE 0472-813:1994 Testing of cables, wires and flexible cords; Corrosivity of combustion gases
• VDE 0370-7-2016 Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis (IEC 60599:2015); German version EN 60599:2016
• VDE 0370-7-2013 Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis (IEC 10/907CD:2013)
• VDE 0370-7-2008 Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis (IEC 60599:1999 + A1:2007); German version EN 60599:1999 + A1:2007

SG-SPRING SG

• SS 300 Pt.1-1985 SPECIFICATION FOR Methods Of Test For Gases Evolved During Combustion Of Electric Cables Part 1 : Method For Determination Of Amount Of Halogen Acid Gas Evolved During Combustion Of Polymeric Materials Taken From Cables

Standard Association of Australia （SAA）

• AS 1890:1999 Thermally released links
• AS 1890:1999(R2016) Thermally released links
• AS B151:1956 Quick-release tapers and gauges for quick-release tapers
• AS 1890:1976 Thermally-released links

GM North America

• GM 9985610-1988 Mold Release

ANS - American Nuclear Society

• 5.10-1998 Airborne Release Fractions at Non-Reactor Nuclear Facilities
• 2.15-2013 Criteria for modeling and calculating atmospheric dispersion of routine radiological releases from nuclear facilities

American Nuclear Society (ANS)

• ANS 5.10-1998(R2024) Airborne Release Fractions at Non-Reactor Nuclear Facilities
• ANS 5.10-1998(R2019) Airborne Release Fractions at Non-Reactor Nuclear Facilities
• ANS 2.15-2013 criteria for modeling and calculating atmospheric dispersion of routine radiological releases from nuclear facilities
• ANS 2.15-2013(R2021) Criteria for Modeling and Calculating Atmospheric Dispersion of Routine Radiological Releases from Nuclear Facilities

Magyar Szabványügyi Testület

• MSZ 21 853/16-1980 Determination of Formaldehyde Release Air Resources Review
• MSZ KGST 2291-1980 Determination of elements released from powder metallurgy products and liquids

The Directorate General of Specifications and Metrology (DGSM)

• OS GSO ISO/TS 12025:2017 Nanomaterials -- Quantification of nano-object release from powders by generation of aerosols
• OS GSO ISO 5660-1:2008 Reaction to fire tests- heat releases smoke product and mass loss rate –part1: heat releases Rate (cone) calorimeter method
• OS GSO ISO 16183:2013 Heavy duty engines -- Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test condition

Comitato Elettrotecnico Italiano

• CEI 89-37:2014 Fire hazard testing Part 8-3: Heat release - Heat release of insulating liquids used in electrotechnical products

Canadian Standards Association (CSA)

• CAN/CSA-N288.1-M87-1987(R2008) Guidelines for Calculating Derived Release Limits for Radioactive Material in Airborne and Liquid Effluents for Normal Operation of Nuclear Facilities
• CAN/CSA N288.1-M87-1987(R2003) Guidelines for Calculating Derived Release Limits for Radioactive Material in Airborne and Liquid Effluents for Normal Operation of Nuclear Facilities
• CSA N288.1-08-2008 Guidelines for calculating derived release limits for radioactive material in airborne and liquid effluents for normal operation of nuclear facilities
• CSA N288.1-2008(R2013) Guidelines for calculating derived release limits for radioactive material in airborne and liquid effluents for normal operation of nuclear facilities
• CSA N288.1-2014(R2019) Guidelines for calculating derived release limits for radioactive material in airborne and liquid effluents for normal operation of nuclear facilities

PL-PKN

• PN-EN ISO 12460-3-2021-03 E Wood-based panels--Determination of formaldehyde release--Part 3: Gas analysis method (ISO/DIS 12460-3:2019)
• PN-EN ISO 17871-2021-02 E Gas cylinders -- Quick-release cylinder valves -- Specification and type testing (ISO 17871:2020)

American Petroleum Institute (API)

• API PUBL 4453-1987 Effects of Airgun Energy Releases on the Northern Anchovy

American Society for Testing and Materials (ASTM)

• ASTM D3427-14a Standard Test Method for Air Release Properties of Petroleum Oils
• ASTM D3427-14 Standard Test Method for Air Release Properties of Petroleum Oils
• ASTM D3427-14ae1 Standard Test Method for Air Release Properties of Petroleum Oils
• ASTM RR-D02-1915 2019 D3427-Test Method for Air Release Properties of Hydrocarbon Based Oils
• ASTM D6007-02(2008) Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber

GB-REG

• REG NASA-LLIS-0025-1992 Lessons Learned - Release of Toxic Hypergolic Fluids/vapors During Payload Processing

Swiss Association for Standardization (SNV)

• SN EN ISO 17871:2021 Gas cylinders - Quick-release cylinder valves - Specification and type testing (ISO 17871:2020)

International Telecommunication Union (ITU)

• ITU-T Q.325-1976 Release of registers
• ITU-T Q.131-1988 Abnormal release conditions of the outgoing register causing release of the international circuit
• ITU-T Q.131-1984 Abnormal release conditions of the outgoing register causing release of the international circuit
• ITU-T Q.131-1980 Abnormal release conditions of the outgoing register causing release of the international circuit
• ITU-T Q.127-1988 Release of registers
• ITU-T Q.325-1988 Release of registers

Bureau of Indian Standards

• IS 17002-2018 Nanomaterials —— Quantification of Nano-Object Release From Powders by Generation of Aerosols
• IS 14845-2000 Resilient Seated Cast Iron Air Relief Valves for Water Works Purposes -

GM Europe

• GME 14070-2007 wheel release torque

ADS

• ADS AS2446-2450 Pin (Quick-Release)

CZ-CSN

• CSN 07 8621-1969 Valve with a safety release device for cylinders for carbon dioxide

Others: iec gas release,iec released gas,released gas analysis