Round tube three-point bending test

Round tube three-point bending test, Total:119 items.

The international standard classification for "Round tube three-point bending test" includes: Raw materials and raw glass , Refractories , Paints and varnishes , Mechanical testing of metals , Testing of metals .

The Chinese standard classification for "Round tube three-point bending test" includes: Ceramic and glass in general , Fireproof material in general , Basic standard and general method for coating , Metal processing property test method , Building sanitary ceramics .

未注明发布机构

DIN 51902 E:2020-05 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
ANSI/ASAE S459-1992(2017) Shear and Three-Point Bending Test ofAnimal Bone

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass--Three-point bending method

Professional Standard - Medicine

YY/T 0858-2011 Standard guide for three-point bending of balloon expandable vascular stents and stent systems

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 2833-1996 Test method for cross-bending strength of vitrified pipe
GB/T 4909.6-1985 Test methods for bare wires--Bend test--Single bend test
GB/T 244-1997 Metallic materials--Tube--Bend test
GB/T 4909.5-1985 Test methods for bare wires--Bend test--Reverse bend test
GB/T 244-2008 Metallic materials - Tube - Bend test
GB/T 6742-2007 Paints and varnishes—Bend test(cylindrical mandrel)
GB/T 6742-1986 Bend test for coating(cylindrical mandrel)

Group Standards of the People's Republic of China

T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural
T/CITS 0111-2024 Test method for oil and gas pipe — Full scale four-point bending test method

Professional Standard - Aviation

HB 5184-1981 Metallic Materials-Tube - Bend Test

National Metrological Technical Specifications of the People's Republic of China

JJF(石化) 035-2020 Calibration Specification for Coating Bend Testers(Cylindrical Mandrel)
JJF(石化)035-2020 Calibration Specification for Coating Bend Testers(Cylindrical Mandrel)

British Standards Institution (BSI)

BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS EN ISO 1519:2011 Paints and varnishes. Bend test (cylindrical mandrel)
BS EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)
BS EN 910:1996 Destructive tests on welds in metallic materials - Bend tests
BS ISO 11093-7:2011 Paper and board. Testing of cores. Determination of flexural modulus by the three-point method

German Institute for Standardization

DIN EN 2746:1998-10 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN 53293:1982-02 Testing of sandwiches; Bending test
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997
DIN EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN EN ISO 1519:2003 Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2002); German version EN ISO 1519:2002
DIN EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000
DIN EN ISO 5173:2012 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd 1:2011); German version EN ISO 5173:2010 + A1:2011

SCC

NS-EN 2746:1998 Aerospace series — Glass fibre reinforced plastics — Flexural test — Three point bend method
DANSK DS/EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
BS ISO 11093-7:1997 Paper and board. Testing of cores-Determination of flexural modulus by the three-point method
BS ISO 11093-6:1996 Paper and board. Testing of cores-Determination of bending strength by the three-point method
BS 3900-E1:1970 Methods of test for paints-Bend test (cylindrical mandrel)
BS EN ISO 1519:2002 Paints and varnishes. Bend test (cylindrical mandrel)
ASD-STAN prEN 6061:1970 Fibre reinforced plastics - Test method - Determination of sandwich flexural strength 4 point bending
BS EN ISO 1519:1995 Paints and varnishes. Bend test (cylindrical mandrel)

VE-FONDONORMA

NORVEN 586-1971 Bending test of circular cross-section steel pipes

American National Standards Institute （ANSI)

ANSI/ASAE S459-1993 Shear and Three-Point Bending Test of Animal Bones

American Society for Testing and Materials (ASTM)

ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D8458-22 Standard Test Method for Evaluation of Fatigue Performance of Asphalt Mixtures Using the Three-Point Bending Cylinder (3PBC) Test
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D5023-99 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-13 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C78/C78M-10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

Lithuanian Standards Office

LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
LST EN 1288-3-2002 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)

European Committee for Standardization (CEN)

EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
EN ISO 1519:2011 Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011)
EN ISO 1519:1995 Paints and Varnishes - Bend Test (Cylindrical Mandrel) (ISO 1519:1973)
EN ISO 6860:2006 Paints and Varnishes - Bend Test (Conical Mandrel)
EN ISO 6860:1995 Paints and Varnishes - Bend Test (Conical Mandrel) (ISO 6860: 1984)

Danish Standards Foundation

DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DS/EN 1288-3:2001 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
DS/EN ISO 1519:2011 Paints and varnishes - Bend test (cylindrical mandrel)

SAE - SAE International

SAE ARP1321A-2000 Flexure Testing of Bent Hydraulic Tubing
SAE ARP1321-1975 Flexure Testing of Bent Hydraulic Tubing

AENOR

UNE-EN 2746:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. FLEXURAL TEST. THREE POINT BEND METHOD.
UNE-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)

BE-NBN

NBN 117.32-1963 Steel pipe bending test
NBN I-920-1968 Paints and varnishes. Cylindrical shaft bending test

International Organization for Standardization (ISO)

ISO/R 167:1960 Bend test on steel tubes
ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
ISO 1519:1973 Paints and varnishes; Bend test (cylindrical mandrel)
ISO 1519:2002 Paints and varnishes - Bend test (cylindrical mandrel)
ISO 1519:2011 Paints and varnishes - Bend test (cylindrical mandrel)
ISO 6602:1985 Plastics; Determination of flexural creep by three-point loading

SE-SIS

SIS SS 24 82 13-1979 Hose — Bending test

FI-SFS

SFS-ISO 6602 E:1986 This standard is approved in English

Association Francaise de Normalisation

NF A03-263:1983 Copper. Bending test for round tubes for capillary brazing and soldering.
NF A49-858:1988 Steel tubes. Bend test on test pieces taken from tubes.
NF T30-040*NF EN ISO 1519:2011 Paints and varnishes - Bend test (cylindrical mandrel)
NF T30-040:1995 Paints and varnishes. Bend test (cylindrical mandrel).
NF L17-703*NF EN 2746:1998 Aerospace series. Glass fibre reinforced plastics. Flexural test. Three point bend method.
NF P78-343*NF EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3 : test with specimen supported at two points (four points bending).
NF T51-120-3:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 3 : essai en flexion trois points sur éprouvettes non encastrées.
NF U51-153:1985 Agricultural drainage. Corrugated unplastificized PVC pipes. Bending resistance test.

Society of Automotive Engineers (SAE)

SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test
SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test
SAE ARP1321-1993 FLEXURE TESTING OF BENT HYDRAULIC TUBING

GB-REG

REG NACA-TN-3735-1956 Bending tests of ring-stiffened circular cylinders

RO-ASRO

STAS 9416-1973 RUBBER HOSES Bending test

CZ-CSN

CSN 42 0414-1963 Bend test on tubes
CSN ON 12 0329-1964 Curved round tube. The third group
CSN ISO 1519:1994 Paints and varnishes. Bend test (cylindrical mandrel)

GSO

GSO ISO 21914:2022 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
BH GSO ISO 21914:2023 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
GSO ISO 11093-6:2008 Paper and board -- Testing of cores -- Part 6: Determination of bending strength by the three-point method
GSO ISO 11093-7:2014 Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method
BH GSO ISO 14679:2016 Adhesives -- Measurement of adhesion characteristics by a three-point bending method

VN-TCVN

TCVN 2099-2013 Paints and varnishes.Bend test(cylindrical mandrel)

Korean Agency for Technology and Standards (KATS)

KS M ISO 1519:2012 Paints and varnishes－Bend test(cylindrical mandrel)
KS M ISO 11093-6:2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-6:2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 1519-2012(2017) Paints and varnishes－Bend test(cylindrical mandrel)
KS M ISO 11093-7:2008 Paper and board-Testing of cores-Part 7:Determination of flexural modulus by the three-point method
KS M ISO 1519:2022 Paints and varnishes — Bend test(cylindrical mandrel)
KS M ISO 14679-2022 Adhesives－Measurement of adhesion characteristics by a three－point bending method

Malaysia Standards

MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending

HU-MSZT

MSZ 05 29.0152-1970 One-sided curved round tube gear

KR-KS

KS M ISO 11093-6-2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 1519-2022 Paints and varnishes — Bend test(cylindrical mandrel)

RU-GOST R

GOST 34368.2-2017 Plastics. Method of determination of flexural creep by three-point loading

PK-PSQCA

PS 1502-1981 METHOD FOR DETERMINATION OF BENDING TEST (RUBBER HOSE)

ZA-SANS

SANS 177:2004 Paints and varnishes - Bend test (cylindrical mandrel)

Japanese Industrial Standards Committee (JISC)

JIS K 7084:1993 Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test