Coating three-point bending test

Coating three-point bending test, Total:183 items.

The international standard classification for "Coating three-point bending test" includes: Raw materials and raw glass , Refractories , Reinforced plastics , Structures of buildings .

The Chinese standard classification for "Coating three-point bending test" includes: Ceramic and glass in general , Fireproof material in general , Fibre reinforced composites .

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass--Three-point bending method

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 1456-2021 Test method for flexural properties of sandwich constructions
GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）

Professional Standard - Medicine

YY/T 0858-2011 Standard guide for three-point bending of balloon expandable vascular stents and stent systems

Group Standards of the People's Republic of China

T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1456-1988 Test method for flexural properties of sandwich constructions
GB/T 4909.6-1985 Test methods for bare wires--Bend test--Single bend test
GB/T 4909.5-1985 Test methods for bare wires--Bend test--Reverse bend test
GB/T 1456-2005 Test method for flexural properties of sandwich constructions

Professional Standard - Ferrous Metallurgy

YB/T 5001-1993 Method for bi-layer matching bend test on sheets of metals

British Standards Institution (BSI)

BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS EN 1876-1:1998 Rubber- or plastics-coated fabrics - Low temperature tests - Bending test
BS EN 13523-7:2021 Coil coated metals. Test methods. Resistance to cracking on bending (T-bend test)
BS EN ISO 17132:2007 Paints and varnishes - T-bend test
20/30425653 DC BS EN 13523-7. Coil coated metals. Test methods. Part 7. Resistance to cracking on bending (T-bend test)
16/30334089 DC BS ISO 4675. Rubber- or plastics-coated fabrics. Low-temperature bend test
BS EN 13523-7:2001 Coil coated metals - Test methods - Resistance to cracking on bending (T-bend test)
BS EN 13523-7:2014 Coil coated metals. Test methods. Resistance to cracking on bending (T-bend test)
BS EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)
BS EN 910:1996 Destructive tests on welds in metallic materials - Bend tests
BS EN ISO 6860:2007 Paints and varnishes - Bend test (conical mandrel)
BS ISO 11093-7:2011 Paper and board. Testing of cores. Determination of flexural modulus by the three-point method
BS EN ISO 32100:2018 Rubber- or plastics-coated fabrics. Physical and mechanical tests. Determination of flex resistance by the flexometer method

German Institute for Standardization

DIN EN 2746:1998-10 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN EN 13523-7:2022 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
DIN EN 13523-7:2022-01 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German version EN 13523-7:2021
DIN EN 13523-7:2020 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German and English version prEN 13523-7:2020
DIN 53293:1982-02 Testing of sandwiches; Bending test
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN 53293:1976 Testing of sandwiches; Bending test
DIN 53293:1982 Testing of sandwiches; Bending test
DIN EN ISO 17132:2008 Paints and varnishes - T-bend test (ISO 17132:2007); English version of DIN EN ISO 17132:2008-01
DIN EN 1876-1:1998-01 Rubber or plastics coated fabrics - Low temperatures tests - Part 1: Bending test; German version EN 1876-1:1997
DIN EN 13523-7:2001 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test); German version EN 13523-7:2001
DIN 51902 E:2020-05 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN EN 13523-7 E:2012-10 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
DIN EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997
DIN EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000
DIN EN ISO 5173:2012 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd 1:2011); German version EN ISO 5173:2010 + A1:2011

SCC

NS-EN 2746:1998 Aerospace series — Glass fibre reinforced plastics — Flexural test — Three point bend method
DANSK DS/EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
NS-EN 13523-7:2001 Coil coated metals — Test methods — Part 7: Resistance to cracking on bending (T-bend test)
NS-EN 13523-7:2021 Coil coated metals – Test methods – Part 7: Resistance to cracking on bending (T-bend test)
ASD-STAN prEN 6061:1970 Fibre reinforced plastics - Test method - Determination of sandwich flexural strength 4 point bending
BS 3900-E1:1966 Methods of test for paints. Bend test
BS ISO 11093-7:1997 Paper and board. Testing of cores-Determination of flexural modulus by the three-point method
BS ISO 11093-6:1996 Paper and board. Testing of cores-Determination of bending strength by the three-point method
12/30268961 DC BS EN 13523-7. Coil coated metals. Test methods. Part 7. Resistance to cracking on bending (T-bend test)
DANSK DS/EN ISO 32100:2011 Rubber- or plastics-coated fabrics – Physical and mechanical tests – Determination of flex resistance by the flexometer method
NS-EN 1876-1:1997 Rubber- or plastics-coated fabrics — Low-temperature tests — Part 1: Bending test
DANSK DS/EN 1876-1:1997 Rubber- or plastics-coated fabrics - Low-temperature tests - Part 1: Bending test
AENOR UNE-EN 1876-1:1998 Rubber- or plastics-coated fabrics - Low-temperature tests - Part 1: Bending test
NS-EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
DANSK DS/EN 13523-7:2014 Coil coated metals – Test methods – Part 7: Resistance to cracking on bending (T-bend test)
AENOR UNE-EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
BS 3900-E1:1970 Methods of test for paints-Bend test (cylindrical mandrel)
DIN EN 6061 E:1996 Draft Document - Aerospace series - Fibre reinforced plastics - Test method; determination of sandwich flexural strength, 4 point bending
DANSK DS/ISO 22751:2020 Rubber- or plastic-coated fabrics – Physical and mechanical test – Determination of bending force

American National Standards Institute （ANSI)

ANSI/ASAE S459-1992(2017) Shear and Three-Point Bending Test ofAnimal Bone
ANSI/ASAE S459-1993 Shear and Three-Point Bending Test of Animal Bones

RU-GOST R

GOST 6806-1973 Paint and lacquer materials. Method for determination of film elasticity in bending
GOST 34368.2-2017 Plastics. Method of determination of flexural creep by three-point loading

American Society for Testing and Materials (ASTM)

ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D522-93a(2001) Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM D522/D522M-13 Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM D2136-02 Standard Test Method for Coated Fabrics8212;Low-Temperature Bend Test
ASTM D2136-94(1998) Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
ASTM D2136-19 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
ASTM G10-10(2024) Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM G10-10(2019) Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM D2136-19e1 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
ASTM D2136-02(2007) Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
ASTM D2136-02e1 Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
ASTM G10-83(1996)e1 Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM G10-10 Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM A1122/A1122M-22 Standard Test Method for Bend Testing of Metallic-Coated Steel Sheet to Evaluate Coating Adhesion
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D522/D522M-17(2021) Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM D522/D522M-17 Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM RR-D01-1069 1991 D0522-Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM D2136-02(2012) Standard Test Method for Coated Fabricsmdash;Low-Temperature Bend Test
ASTM D6905-03 Standard Test Method for Impact Flexibility of Organic Coatings
ASTM D6905-03(2008) Standard Test Method for Impact Flexibility of Organic Coatings
ASTM D6905-03(2012) Standard Test Method for Impact Flexibility of Organic Coatings
ASTM G70-81(1998) Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test)
ASTM D522-93a Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
ASTM G70-07 Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test)
ASTM G10-10(2015) Standard Test Method for Specific Bendability of Pipeline Coatings
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D8058-24 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E2092-13 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM C78/C78M-10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-10 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

Spanish Association for Standardization (UNE)

UNE-EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
UNE-EN 2746:1999 AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. FLEXURAL TEST. THREE POINT BEND METHOD.
UNE-EN 1876-1:1998 Rubber- or plastics-coated fabrics - Low-temperature tests - Part 1: Bending test
UNE-EN 13523-7:2001 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test).
UNE-EN 13523-7:2022 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
UNE-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)

CZ-CSN

CSN 67 3079-1983 Bend test of paint coatings
CSN 67 3080-1985 Bend test of paint coatinos /conical mandrel/

Lithuanian Standards Office

LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
LST EN 13523-7-2002 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
LST EN 1876-1-2000 Rubber- or plastics-coated fabrics - Low-temperature tests - Part 1: Bending test
LST EN 1288-3-2002 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)

European Committee for Standardization (CEN)

EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
EN 1876-1:1997 Rubber- or Plastics-Coated Fabrics - Low-Temperature Tests - Part 1: Bending Test
CEN EN 13523-7-2001 Coil Coated Metals - Test Methods - Part 7: Resistance to Cracking on Bending (T-Bend Test)
EN 12100:1997 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
EN 13523-7:2021 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
EN 13523-7:2014 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
EN 13523-7:2001 Coil Coated Metals - Test Methods - Part 7: Resistance to Cracking on Bending (T-Bend Test)
EN ISO 22751:2020 Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force (ISO 22751:2020)

Danish Standards Foundation

DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DS/EN 13523-7:2001 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
DS/EN 1876-1:1998 Rubber- or plastics-coated fabrics - Low-temperature tests - Part 1: Bending test
DS/EN 13523-7:2021 Coil coated metals – Test methods – Part 7: Resistance to cracking on bending (T-bend test)
DS/EN 1288-3:2001 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)

AT-ON

OENORM EN 13523-7-2021 Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)

(U.S.) Ford Automotive Standards

FORD FLTM BI 009-05-2001 BEND TEST FOR COATING ADHESION

KR-KS

KS M ISO 4675-2023 Rubber- or plastics-coated fabrics — Low-temperature bend test
KS K 0855-2018(2023) Test method of resistance to damage by flexing for rubber or plastics coated fabric
KS M ISO 11093-6-2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method

GSO

OS GSO ISO 4675:2015 Rubber- or plastics-coated fabrics -- Low-temperature bend test
BH GSO ISO 32100:2016 Rubber- or plastics-coated fabrics -- Physical and mechanical tests -- Determination of flex resistance by the flexometer method
OS GSO ISO 32100:2013 Rubber- or plastics-coated fabrics -- Physical and mechanical tests -- Determination of flex resistance by the flexometer method
GSO ISO 21914:2022 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
BH GSO ISO 21914:2023 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
GSO ISO 11093-6:2008 Paper and board -- Testing of cores -- Part 6: Determination of bending strength by the three-point method
GSO ISO 11093-7:2014 Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method
BH GSO ISO 14679:2016 Adhesives -- Measurement of adhesion characteristics by a three-point bending method
GSO ISO 14679:2015 Adhesives -- Measurement of adhesion characteristics by a three-point bending method

International Organization for Standardization (ISO)

ISO 4675:1979 Fabrics coated with rubber or plastics — Low temperature bend test
ISO 17132:2007 Paints and varnishes - T-bend test
ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
ISO 1519:2002 Paints and varnishes - Bend test (cylindrical mandrel)
ISO 6602:1985 Plastics; Determination of flexural creep by three-point loading
ISO 22751:2020 Rubber- or plastic-coated fabrics — Physical and mechanical test — Determination of bending force

Korean Agency for Technology and Standards (KATS)

KS M ISO 4675-2012(2017) Rubber- or plastics-coated fabrics－Low-temperature bend test
KS M ISO 4675-2012(2022) Rubber- or plastics-coated fabrics－Low-temperature bend test
KS M 5505-1983 Test methods for flexural stiffness of paint
KS M ISO 17132:2013 Paints and varnishes ㅡ T-bend test
KS M ISO 1519:2012 Paints and varnishes－Bend test(cylindrical mandrel)
KS M ISO 11093-6:2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-6:2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 6860:2012 Paints and varnishes－Bend test(conical mandrel)
KS M ISO 14679-2022 Adhesives－Measurement of adhesion characteristics by a three－point bending method

GOSTR

GOST ISO 4675-2019 Rubber- or plastics-coated fabrics. Low-temperature bend test

Association Francaise de Normalisation

NF T30-010:1992 Paints and varnishes. Evaluation of adhesion or cohesion. Three point bending method.
NF T30-105*NF EN ISO 17132:2007 Paints and varnishes - T-bend test
NF G37-111-1*NF EN 1876-1:1998 Rubber- or plastics-coated fabrics. Low temperature tests. Part 1 : bending test.
NF EN 13523-7:2021 Pre-painted sheets - Test methods - Part 7: resistance to bending cracking (T-bend test)
NF L17-703*NF EN 2746:1998 Aerospace series. Glass fibre reinforced plastics. Flexural test. Three point bend method.
NF P78-343*NF EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3 : test with specimen supported at two points (four points bending).
NF T37-001-7:2014 Coil coated metals - Test methods - Part 7 : resistance to cracking on bending (T-bend test)
NF T37-001-7*NF EN 13523-7:2021 Coil coated metals - Test methods - Part 7 : resistance to cracking on bending (T-bend test)
NF T51-120-3:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 3 : essai en flexion trois points sur éprouvettes non encastrées.
NF B30-101:1967 Glass. Bend test of a dual-glass test specimen.
NF T30-078*NF EN ISO 6860:2007 Paints and varnishes - Bend test (conical mandrel)

FI-SFS

SFS-ISO 6602 E:1986 This standard is approved in English

Society of Automotive Engineers (SAE)

SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test
SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test

IN-BIS

IS 7016 Pt.10-1981 Test methods for coated and treated fabrics Part X Low temperature bending test

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)

Malaysia Standards

MS 1473-1999 Method of test for measuring the dynamic mechanical properties of plastics using three point bending

Canadian General Standards Board （CGSB)

CGSB 1-GP-71 METH 137.2-1978 Methodes D'Essai Des Peintures Et Pigments Essai Au Ruban Adhesif Feuils Plies

SAE - SAE International

SAE ARP1321A-2000 Flexure Testing of Bent Hydraulic Tubing
SAE ARP1321-1975 Flexure Testing of Bent Hydraulic Tubing

PT-IPQ

E 180-1965 Varnishes and coatings, copper type axis bend test

Japanese Industrial Standards Committee (JISC)

JIS K 7084:1993 Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test

IT-UNI

UNI EN ISO 22751:2020 Rubber or plastic coated fabrics - Physical and mechanical test - Determination of bending force

GM Daewoo

GMKOREA EDS-T-7912-2015 Flexural Test Method for Paint Coatings (4th Edition; English/Korean)