Wood three-point bending test

Wood three-point bending test, Total:137 items.

The international standard classification for "Wood three-point bending test" includes: Refractories , Raw materials and raw glass , Other rubber and plastics products .

The Chinese standard classification for "Wood three-point bending test" includes: Fireproof material in general , Ceramic and glass in general , Other rubber products .

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38978-2020 Refractory products—Determination of stress-strain (three-point bending method）

未注明发布机构

ANSI/ASAE S459-1992(2017) Shear and Three-Point Bending Test ofAnimal Bone
DIN 51902 E:2020-05 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51944 E:2020-05 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33099-2016 Test methods of stiff’ness for dipped reinforcing material一Three-point bending
GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass--Three-point bending method

Professional Standard - Aerospace

QJ 2099-1991 Test method for flexural properties of three-dimensional fiber reinforced composite materials

Professional Standard - Medicine

YY/T 0858-2011 Standard guide for three-point bending of balloon expandable vascular stents and stent systems

Group Standards of the People's Republic of China

T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural

Taiwan Provincial Standard of the People's Republic of China

CNS 3940-1999 Bend test pieces for metallic materials
CNS 454-2005 Wood - Determination of static bending properties
CNS 13976-1997 Method of test for flexural strength of dimensional stone

Association Francaise de Normalisation

NF B51-009:1985 Wood. Dynamic bending test.
NF B51-021:1979 Wood. Assembly. Multiple finger joints. Flexion test.
NF T51-120-3:1995 Plastiques et composites - Détermination des propriétés de fatigue en flexion - - Partie 3 : essai en flexion trois points sur éprouvettes non encastrées.
NF A03-158:2005 Metallic materials - Bend test.
NF A03-158:2016 Metallic materials - Bend test
NF A03-158*NF EN ISO 7438:2020 Metallic materials - Bend test
NF L17-703*NF EN 2746:1998 Aerospace series. Glass fibre reinforced plastics. Flexural test. Three point bend method.
NF B51-008:2017 Wood - Static bending - Determination of ultimate strength in static bending using small clear specimens

German Institute for Standardization

DIN 52186:1978-06 Testing of wood; bending test
DIN 52186:1978 Testing of wood; bending test
DIN EN 2746:1998-10 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN 52189-1:1981-12 Testing of wood; Impact bending test; Determination of impact bending strength
DIN 52189-1:1981 Testing of wood; Impact bending test; Determination of impact bending strength
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN 53293:1982-02 Testing of sandwiches; Bending test
DIN EN ISO 5173:2012 Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd 1:2011); German version EN ISO 5173:2010 + A1:2011
DIN EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998
DIN EN ISO 7438:2005 Metallic materials - Bend test (ISO 7438:2005); English version of DIN EN ISO 7438
DIN ISO 11093-6:2005-09 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN EN ISO 7438:2012 Metallic materials - Bend test (ISO 7438:2005); German version EN ISO 7438:2005
DIN EN ISO 7438:2021-03 Metallic materials - Bend test (ISO 7438:2020); German version EN ISO 7438:2020
DIN 51944:1999 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
DIN EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
DIN ISO 11093-7:2012-10 Paper and board - Testing of cores - Part 7: Determination of flexural modulus by the three-point method (ISO 11093-7:2011)

Korean Agency for Technology and Standards (KATS)

KS F 2208-1999 Method of bending test for wood
KS F 2208-1994 Method of Bending Test for Wood
KS F 2208-2020 Method of bending test for wood
KS F 2211-1994 Method of Impact Bending Test for Wood
KS F 2211-1999 Method of Impact Bending Test for Wood
KS F 2150-2020 Method of static bending test for full sized structural lumber
KS F 2211-2004 Method of impact bending test for wood
KS B 5535-2003 Material testing machines－Bending－test machines
KS B 5535-1982 Material testing machines－Bending－test machines
KS B 0804-2001(2006) Metallic materials－Bend test
KS B 0804-2001(2021) Metallic materials－Bend test
KS B 0804-2001(2016) Metallic materials－Bend test
KS B 0804-2021 Metallic materials－Bend test
KS F 2159-2-2007 Method of bending test for structural wood-based panels
KS F 2208-2004 Method of bending test for wood
KS B 5535-2003(2018) Bending tester for material testing
KS B 0803-1985 BEND TEST SPECIMEN FOR METALS
KS B 0803-1977(1995) BEND TEST SPECIMEN FOR METALS

British Standards Institution (BSI)

BS EN 2746:1998 Glass fibre reinforced plastics - Flexural test - Three point bend method
BS EN 910:1996 Destructive tests on welds in metallic materials - Bend tests
BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
18/30356322 DC BS ISO 21914. Test methods for fibre-reinforced cementitious composites. Bending moment-curvature curve by four-point bending test
BS EN ISO 7438:2005 Metallic materials - Bend test
BS EN ISO 7438:2016 Metallic materials. Bend test
BS EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)
BS EN 13523-7:2001 Coil coated metals - Test methods - Resistance to cracking on bending (T-bend test)

Japanese Industrial Standards Committee (JISC)

JIS Z 2113:1977 Method of bending test for wood
JIS Z 2248:2022 Metallic materials -- Bend test
JIS Z 2248:2006 Metallic materials -- Bend test

SCC

NS-EN 2746:1998 Aerospace series — Glass fibre reinforced plastics — Flexural test — Three point bend method
BS ISO 11093-6:1996 Paper and board. Testing of cores-Determination of bending strength by the three-point method
BS ISO 11093-7:1997 Paper and board. Testing of cores-Determination of flexural modulus by the three-point method
CSA S442.1-M1985-1985 Method of In-Grade Bending Tests of Lumber
DANSK DS/EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
BS EN ISO 7438:2000 Metallic materials. Bend test
DANSK DS/ISO 7438:2020 Metallic materials – Bend test
DIN 51902 E:2020 Draft Document - Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
UNE 57163-7:2004 Paper and board - Testing of cores - Part 7: Determination of bending strength by the three-point method.

American National Standards Institute （ANSI)

ANSI/ASAE S459-1993 Shear and Three-Point Bending Test of Animal Bones

Society of Automotive Engineers (SAE)

SAE J949-2022 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three-Point Bending Test
SAE J949-2009 Test Method for Determining Stiffness of Interior Trim Materials and Substrates by a Three Point Bending Test

American Society for Testing and Materials (ASTM)

ASTM D5023-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D5023-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-17 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM D8058-17e1 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D6272-02(2008)e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6272-17 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending

Lithuanian Standards Office

LST EN 2746-2001 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method

European Committee for Standardization (CEN)

EN 2746:1998 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
EN ISO 7438:2000 Metallic Materials - Bend Test ISO 7438: 1985
EN ISO 7438:2005 Metallic materials Bend test
EN ISO 7438:2020 Metallic materials - Bend test (ISO 7438:2020)

Danish Standards Foundation

DS/EN 2746:1999 Aerospace series - Glass fibre reinforced plastics - Flexural test - Three point bend method
DS/EN ISO 7438:2005 Metallic materials - Bend test
DS/ISO 7438:2020 Metallic materials – Bend test

GSO

GSO ISO 21914:2022 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
BH GSO ISO 21914:2023 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
OS GSO ISO 11093-6:2008 Paper and board -- Testing of cores -- Part 6: Determination of bending strength by the three-point method
OS GSO ISO 11093-7:2014 Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method
BH GSO ISO 11093-7:2015 Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method
GSO ISO 7438:2021 Metallic materials — Bend test
BH GSO ISO 7438:2022 Metallic materials — Bend test

RO-ASRO

STAS 338-1982 WOOD ?mpaci bcnding testing with friction penduliim

International Organization for Standardization (ISO)

ISO 21914:2019 Test methods for fibre-reinforced cementitious composites — Bending moment — Curvature curve by four-point bending test
ISO 7438:2005 Metallic materials - Bend test
ISO 7438:2020 Metallic materials — Bend test
ISO 7438:1985 Metallic materials; Bend test
ISO 7438:2016 Metallic materials - Bend test