liquid metal fluidity

liquid metal fluidity, Total:108 items.

The international standard classification for "liquid metal fluidity" includes: Corrosion of metals , Other products of non-ferrous metals , Other methods of testing of metals , Powder metallurgy , Mechanical testing of metals , Chemical analysis of metals .

The Chinese standard classification for "liquid metal fluidity" includes: Metal chemical property test method , Rare scattered metals and their alloys , Metal physical property test method , Metal mechanical property test method , Vessel materials and their inspection methods , Powder metallurgy analysis method , Materials .

Group Standards of the People's Republic of China

T/GDLUB 002-2024 A test method for dynamic foaming properties of water-soluble metalworking fluids
T/CNS 16-2020 Determination for corrosion reduction of metals and alloys in liquid lead alloys
T/ZMDS 60001-2022 Liquid metal lubricate used in high speed sliding bearings of CT tubes

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39859-2021 Gallium-based liquid metal
GB/T 41079.1-2021 Test methods for physical properties of liquid metals—Part 1:Determination of density

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1482-2022 Metallic powders—Determination of flow rate—Calibrated funnel methods（Hall flowmeter）
GB/T 43611-2023 Gallium-based liquid metal thermal interface materials
GB/T 1482-2010 Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter)
GB/T 1482-1984 Metallic powders－Determination of flowability by means of a calibrated funnal (Hall flowmeter)
GB/T 5482-2007 Test method of metallic materials—Dynamic tear
GB/T 5482-1993 Metallic materials－Dynamic tear testing method
GB/T 5482-2023 Metallic materials―Dynamic tear test method
GB/T 41079.2-2022 Test methods for physical properties of liquid metals—Part 2: Determination of electrical conductivity
GB 5482-1993 Metallic materials－Dynamic tear testing method
GB/T 43096-2023 Metallic powders—Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions

未注明发布机构

CSA C22.2 No.227.2.1-2019 Liquid-tight flexible nonmetallic conduit
AS 4250.5:1995(R2016) Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Dynamic measurement

Taiwan Provincial Standard of the People's Republic of China

CNS 9202-1982 Method for Determining Flow Rate of Metal Powders
CNS 8556-1982 Plain Bearings the Tribological Behaviour of Metallic Antifriction Materials Siginificant Terms

Military Standard of the People's Republic of China-General Armament Department

GJB 8799-2015 Dynamic compression test method for metallic materials
GJB 8375-2015 Test method for dynamic torsion of metallic materials
GJB 8374-2015 Test method for dynamic tension of metallic materials

Professional Standard - Railway

TB/T 2985-2000 Test Method for Dynamic Tear Testing of Metallic Materials

Professional Standard - Aerospace

QJ 1153-1987 Specification for steady-state flow measurement of liquid rocket motors

Lithuanian Standards Office

LST EN 577-2000 Aluminium and aluminium alloys - Liquid metal - Specifications
LST EN ISO 19879:2011 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010)
LST EN ISO 19879:2021 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021)

Danish Standards Foundation

DS/EN 577:1996 Aluminium and aluminium alloys - Liquid metal - Specifications
DS/ISO 19879:2021 Metallic tube connections for fluid power and general use – Test methods for hydraulic fluid power connections
DS/EN ISO 19879:2010 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections

SCC

NS-EN 577:1995 Aluminium and aluminium alloys — Liquid metal — Specifications
DANSK DS/EN 577:1995 Aluminium and aluminium alloys - Liquid metal - Specifications
ANS 54.8-1988 Liquid Metal Fire Protection in LMR Plants
VDI 3822 BLATT 1.6-2019 Damage analysis — liquid metal induced cracking
CSA C22.2 No.56-1977(R1999) Flexible Metal Conduit and Liquid-Tight Flexible Metal Conduit
VDI 3822 BLATT 1.6-2019 Damage analysis — liquid metal induced cracking
DANSK DS/ISO 19879:2021 Metallic tube connections for fluid power and general use – Test methods for hydraulic fluid power connections
CAN/CSA-C22.2 No.227.2.1-2004(C2013) Liquid-Tight Flexible Non-Metallic Conduits
CSA C22.2 No.227.2.1-2014 Liquid-tight flexible nonmetallic conduit
BS EN ISO 19879:2005 Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections
CSA C22.2 No.227.2-1993(R1999) Flexible Liquid-Tight Nonmetallic Conduit
CAN/CSA-C22.2 No.227.2.1-2004(R2013) Liquid-Tight Flexible Nonmetallic Conduit
CSA C22.2 No.227.2-1993(C2003) Liquid-tight flexible non-metallic conduits
CSA C22.2 No.227.2-1993(R2003) Flexible Liquid-Tight Nonmetallic Conduit
CSA C22.2 No.227.2-M1987-1987 Flexible Liquid-Tight Nonmetallic Conduit
BS PD ISO/TR 10771-2:2008 Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes-Rating method
AENOR UNE-EN ISO 19879:2010 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010)
NS-EN ISO 19879:2010 Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections (ISO 19879:2010)
UNE-EN ISO 19879:2006 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2005)
NS-EN ISO 19879:2005 Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections (ISO 19879:2005)
NS-EN ISO 19879:2021 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021)
DANSK DS/EN ISO 19879:2021 Metallic tube connections for fluid power and general use – Test methods for hydraulic fluid power connections (ISO 19879:2021)

Association Francaise de Normalisation

NF A57-110*NF EN 577:1995 Aluminium and aluminium alloys. Liquid metal. Specifications.
NF EN 577:1995 Aluminium et alliages d'aluminium - Métal liquide - Spécifications.
NF M60-825:2012 Nuclear energy - Radioactivity measurement in gaseous and liquid effluents - Sampling of liquid effluents in a vessel or a discharge channel
NF E48-075:2021 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections

German Institute for Standardization

DIN 1725-5:1986 Aluminium alloys, casting alloys; ingots (pigs), liquid metal; composition
DIN EN 577:1995-09 Aluminium and aluminium alloys - Liquid metal - Specifications; German version EN 577:1995
DIN 1725-5 Bb.1:1986 Aluminium alloys, casting alloys; ingots (pigs), liquid metal; composition; information on alloying processes
DIN EN ISO 19879:2021-06 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021); German version EN ISO 19879:2021
DIN EN 577:1995 Aluminium and aluminium alloys - Liquid metal - Specifications; German version EN 577:1995
DIN 50920-1:1985 Corrosion of metals; corrosion testing in flowing liquids; general
DIN 31665:1993 Plain bearings; testing of bearing metals; resistance to corrosion by lubricants and static conditions

European Committee for Standardization (CEN)

EN 577:1995 Aluminium and aluminium alloys - Liquid metal - Specifications
EN ISO 10070:2019 Metallic powders - Determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions (ISO 10070:2019)

AENOR

UNE-EN 577:1996 Aluminium and aluminium alloys - Liquid metal - Specifications
UNE-EN ISO 19879:2010 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010)

TH-TISI

TIS 1035-1991 Standard for metal polish, liquid

United States Navy

NAVY MIL-H-22343 A-1968 HOSE ASSEMBLIES, METAL, LIQUID OXYGEN
NAVY MIL-H-22343 A (2)-1981 HOSE ASSEMBLIES, METAL, LIQUID OXYGEN
NAVY MIL-H-22343 A NOTICE 1-1997 HOSE ASSEMBLIES, METAL, LIQUID OXYGEN

RU-GOST R

GOST 16438-1970 Sand and metal moulds for making of fluidity of metals tects
GOST 33810-2016 Metal barrels for food liquids. Specifications
GOST 21132.0-1975 Aluminium alloys. Method for determination of hydrogen content in molten metal

ANS - American Nuclear Society

54.8-1988 Liquid Metal Fire Protection in LMR Plants

British Standards Institution (BSI)

BS 6729:1987 Method for determination of the dynamic fracture toughness of metallic materials
BS ISO 19819:2004 Metallic materials - Tensile testing in liquid helium
BS ISO 7278-1:1990 Liquid hydrocarbons. Dynamic measurement. Proving systems for volumetric meters. General principles
BS EN ISO 19879:2021 Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections

Japanese Industrial Standards Committee (JISC)

JIS Z 2502:1979 Method for determination of flow rate of metal powders
JIS Z 2502:2000 Metallic powders -- Determination of flowability by means of a calibrated funnel (Hall flowmeter)
JIS Z 2502:2012 Metallic powders -- Determination of flow rate by means of a calibrated funnel (Hall flowmeter)

HU-MSZT

MSZ 10074-1970 Metal cutting tools. Flow performance testing
MSZ 15436-1982 Metal powder flow ability testing

SAE - SAE International

SAE J2658-2013 Carbon and Steel Alloy Tube Conductor Assemblies for Fluid Power and General Use - Test Methods for Hydraulic Fluid Power Metallic Tube Assemblies
SAE J2658-2010 Metallic Tube Conductor Assemblies for Fluid Power and General UseTest Methods for Hydraulic Fluid Power Metallic Tube Assemblies

Society of Automotive Engineers (SAE)

SAE J2658-2003 Metallic Tube Conductor Assemblies for Fluid Power and General UseTest Methods for Hydraulic Fluid Power Metallic Tube Assemblies

SE-SIS

SIS SS 11 10 31-1982 Powder metallurgy - Metallic powders - Determination of flowability

International Organization for Standardization (ISO)

ISO 19819:2004 Metallic materials - Tensile testing in liquid helium
ISO 4490:1978 Metallic powders; Determination of flowability by means of a calibrated funnel (Hall flowmeter)
ISO 4490:2001 Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter)
ISO 10070:1991 Metallic powder; determination of envelope-specific surface area from measurements of the permeability to air of a powder bed under steady-state flow conditions

Korean Agency for Technology and Standards (KATS)

KS D ISO 19819:2005 Metallic materials-Tensile testing in liquid helium
KS M 3978-2019 Magnetorheological elastomer — Determination of dynamic magnetorheological properties by shear vibration

CZ-CSN

CSN 42 0480-1982 Aluminium and aluminium alloys. Determination of hydrogen content in liquid mettal

Defense Logistics Agency

DLA A-A-55805-1996 SHEARING MACHINES, METAL SQUARING, HYDRAULIC DRIVE
DLA A-A-55805 VALID NOTICE 1-2003 SHEARING MACHINES, METAL SQUARING, HYDRAULIC DRIVE

Standard Association of Australia （SAA）

AS 4250.5:1995 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Dynamic measurement

BE-NBN

NBN T 52-601-1978 Petroleum products - Liquid hydrocarbons - Automatic pipeline ■sampling

VDI - Verein Deutscher Ingenieure

VDI 3822 BLATT 1.6-2017 Schadensanalyse - Fluessigmetallinduzierte Rissbildung

ES-UNE

UNE-EN ISO 19879:2022 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021)

American National Standards Institute （ANSI)

ANSI/ASTM E604:1983 Test Method for Dynamic Tear Testing of Metallic Materials

RO-ASRO

STAS 2426-1988 RIGID METALLIC MEASURING RODS

IT-UNI

UNI EN ISO 19879:2021 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections

American Society for Testing and Materials (ASTM)

ASTM E1302-13(2017) Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids
ASTM E1302-00 Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids
ASTM B212-09 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel

PL-PKN

PN-EN ISO 19879-2021-08 E Metallic tube connections for fluid power and general use -- Test methods for hydraulic fluid power connections (ISO 19879:2021)