Thread Dimensioning

Thread Dimensioning, Total:320 items.

The international standard classification for "Thread Dimensioning" includes: Bolts, screws, studs , Screw threads , Special screw threads , Metric screw threads , Inch screw threads , Machine tools in general , Lathes , Dividing and tool-workpiece holding devices .

The Chinese standard classification for "Thread Dimensioning" includes: Fastener , Basic standards and general methods , Machine tool assistive device and accessory , Lathe , Measuring tool and instrument , Measuring devices .

Taiwan Provincial Standard of the People's Republic of China

CNS 4223-1978 Metric Trapezoidal Screw Thread Limits for External Screw Threads from 8 mm to 100 mm
CNS 4221-1978 Metric Trapezoidal Screw Thread (Limits for Internal Screw Threads From 8mm to 100mm)
CNS 519-1955 Limit of Whitworth Threads (Fine Fit)
CNS 4369-1978 Round Thread with Clearance and Flat Flank with Pitch 7 mm Nominal Sizes
CNS 4222-1978 Metric Trapezoidal Screw Thread (Limits for Internal Screw Threads from 105 mm to 300 mm)
CNS 4224-1978 Metric Trapezoidal Screw THread (Limits for Externational Screw Threads from 105 mm to 300 mm )
CNS 514-1978 Metric Trapezoidal Screw Thread (Basic Sizes)
CNS 4578-1978 Bolted Connections with Reduced Booy Metric Thread with Large Clearence, Nominal Values and Limits
CNS 508-1978 Knuckle Thread (Profiles, Nominal Sizes)
CNS 4552-1978 Rounded Trapezoidal Thread Nominal Sizes

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 5276-1985 Fasteners; Bolts,screws,studs and nuts; Symbols and designations of dimensions
GB/T 196-2003 General Purpose Metric Screw Threads-Basic Dimensions
GB/T 5276-2015 Fasteners—Bolts, screws, studs and nuts—Symbols and descriptions of dimensions
GB/T 196-2025 General purpose metric screw threads—Basic dimensions
GB/T 20667-2006 Unified screw threads - Limits of sizes
GB/T 12359-1990 Limits of sizes for metric trapezoidal screw threads
GB/T 15756-2008 General purpose metric screw threads - Limits of sizes
GB/T 12359-2008 Metric trapezoidal screw threads - Limits of sizes
GB/T 20668-2006 Unified screw threads - Basic dimensions
GB/T 15054.3-1994 Miniature screw threads - Basic dimensions
GB/T 15054.5-1994 Miniature screw threads - Limits of sizes
GB/T 5796.3-1986 Metric trapezoidal screw threads; Basic dimensions
GB/T 15756-1995 Limits of size for general purpose screw threads

未注明发布机构

FORD WA972-1996 THREAD DIMENSIONS FOR LOCKING THREADS - ROOT INTERFERENCE TYPE

Military Standard of the People's Republic of China-General Armament Department

GJB 3.3A-2003 MJ threads Part 3: Limiting dimensions of pipe fitting threads
GJB 3.3-1985 Dimensions and tolerances of MJ threaded pipe fittings threads
GJB 3.4-1985 Dimensions and tolerances of threads of MJ threaded structural parts
GJB 3.2A-2015 MJ Threads Part 2: Limiting Dimensions of Bolt and Nut Threads
GJB 3.2A-2003 MJ Threads Part 2: Limit dimensions for bolts and mts
GJB 3.3A-2015 MJ threads Part 3: Limiting dimensions of pipe fitting threads
GJB 3.2-1982 MJ threaded bolt and nut thread dimensions and tolerances

Professional Standard - Machinery

JB/ZQ 4168-2006 Pipe thread - Blank dimension before cutting inner and outer thread
JB/T 3411.15-1999 Holder for taping and thread die cutting - Dimensions
JB/T 4137-1999 Threaded Main Shaft End Dimensions
JB 4098-1985 Dimensional Coding for Passenger Cars

Professional Standard - Aerospace

QJ 162-1974 Basic size of thread ring gauge before plating
QJ 1320-1987 Application Dimensions of Regular Screw Thread Gauge
QJ 160-1974 Ordinary thread gauge thread profile dimensions and tolerances
QJ 164-1974 Thread profile dimensions and tolerances of thread gauges before plating
QJ 2761-1995 Application Dimensions of MJ Thread Guage

Professional Standard - Aviation

HB 3907-1995 Application Demension of Common Thread Gauge
HB 3907-1986 Common thread gauge application size

Danish Standards Foundation

DS/ISO 228/1:1983 Pipe threads where pressure-tight joints are not made on the threads. Part 1: Designation, dimensions and tolerances
DS 685:1990 Steel conduit thread. Sizes
DS/ISO 725:2009 ISO inch screw threads - Basic dimensions
DANSK DS/ISO 725:2009 ISO inch screw threads - Basic dimensions
DS/ISO 725:1988 ISO inch screw threads. Basic dimensions
DS 2087:1968 Female ended valves - End-to-end dimensions

International Organization for Standardization (ISO)

ISO 228-1:1982 Pipe threads where pressure-tight joints are not made on the threads; Part 1 : Designation, dimensions and tolerances
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation
ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation
ISO 228-1:1978 Title missing - Legacy paper document
ISO 2284:1976 Hand taps for pipe threads for parallel and taper threads — General dimensions and marking
ISO/DIS 8559-2:2024 Size designation of clothes
ISO 724:1978 ISO metric screw threads — Basic dimensions
ISO 725:2009 ISO inch screw threads - Basic dimensions
ISO 725:1978 ISO inch screw threads; Basic dimensions
ISO 3040:1974 Technical drawings — Dimensioning and tolerancing cones
ISO 7852:1983 Earth-moving machinery; Plough bolt heads; Shapes and dimensions (excluding thread dimensions)
ISO 225:1983 Fasteners; Bolts, screws, studs and nuts; Symbols and designations of dimensions Trilingual edition
ISO/R 129:1959 Engineering drawing — Dimensioning
ISO 7-1 Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation

Swedish Institute for Standards

SIS SMS 681-1947 Round thread. Nominal size
SIS SMS 1708-1961 Schrader thread, external spinal thread, standard and material sizes
SIS SMS 365-1949 Bicycle thread. Nominal size
SIS SMS 1706-1961 American pipe thread, sealed type, external tapered pipe thread NPTF nominal and material dimensions
SIS SMS 1707-1961 American pipe thread, sealed type, internal tapered pipe thread NPTF nominal and material dimensions
SIS SEN 30 08 20-1965 Edison screw threads Dimensions
SIS SMS 1705-1961 American pipe thread, sealed type, internal cylindrical pipe thread NPSF nominal and material dimensions
SIS SS 1711-1978 UNC-threads, dimensioned for coating — Thread tolerances
SIS SS 1712-1978 UNF-threads, dimensioned for coating - Thread tolerances
SIS SMS 2-1972 ISO metric screw threads. Selected sizes for screw threads with coarse pitch
SS 3194:1988 ISO inch screw threads - Hot dip galvanizing of external screw threads (UNC threads) - Tolerances and limits of sizes
SS 1716:1988 ISO inch screw threads - Selected sizes for screwthreads with coarse pitch
SS 1717:1988 ISO inch screw threads - Selected sizes for screwthreads with fine pitch
SIS SS-ISO 10207:1991 Rock drilling equipment — Rope threaded drill steel equipment for percussive drilling, nominal sizes 22 mm to 38 mm
SS 2630:1991 Welding equipment - TIG Torches - Threads, dimensions and marking
SS 1747:1979 Screw calliper gauges - Profiles and tolerances for ISO inch screw threads
SS 1715:1988 ISO general purpose metric screw threads - Selected sizes for screw threads with fine pitch
SS-EN 10226-2:2005 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
SIS SS 2630-1991 Welding equipment — TIG Torches — Threads, dimensions and marking
SIS SMS 2164-1967 Dimensions of head for hexagon bolls. Metric screw threads
SS-EN 10226-1:2005 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
SIS SS 3194-1988 ISO inch screw threads- Hot dip galvanizing of external screw threads (UNC threads) - Tolerances and limits of sizes
SIS SMS 2171-1973 Metric screw threads. Tolerances. Limits of sizes for commercial bolt and nut threads. Medium quality
SIS SMS 1917-1970 Engineering drawing. Dimensioning
SIS SMS 1755-1974 Hexagon nuts. General dimensions. ISO metric screw threads
SIS SS 1715-1988 /SO genera/purpose metric screw threads — Selected sizes for screw threads with fine pitch

National Standardisation Body (ASRO)

STAS 5326-1979 SCREW THREAD FOR CYCLES Nominal prolile and sizes
STAS 691-1988 EDISON SCREWTHREAD Dimensions
STAS 1270-1986 TYRE VALVE THREADS Dimensions
STAS 1112/11-1990 Screw cutting tools. Taps for pipe threads. Dimensions
STAS 10651-1976 SCREWED GLANDS FOR CABLES Dirpensions
STAS 2114/2-1975 ISO TRAPEZOIDAL SCREW THREADS Nominal diameters and pitches
STAS 6936/9-1976 Threaded fittings for refrigerating plants TEES Dimensions
STAS 2114/3-1975 ISO TRAPEZOIDAL SCREW THREADS Basic sizes
STAS 4851-1980 THREADED TAPER PIN, WITH STEM Dimensions
STAS 3379/2-1979 HOLE BOR IN G CUTTERS FOR METRIC THREAD Dimensions
STAS 8957-1971 CIRCULAR SCREWING DIES FOR GAS PIPE THREAD WITH THREAD TIGHTENING Dimensions
STAS 1112/9-1979 Taps for metric thread NUT TAPS Dimensions
STAS 8795-1987 Tapping screws SCREW THREAD AND THREAD END Dimensions
STAS 402-1988 PIPE TIIREADS WIIERE PRESSURE-TIGUT JOINTS ARE MADE ON TUE FHREADS Dimensions and tolerances
STAS 7529-1966 Long Trapezoidal Thread Size/Dimensions
STAS 3379/3-1979 TA PER SHANK CUTTERS FOR METRIC THREAD Dimcns ioiis
STAS 5019-1988 Seamless steel pipes THKKADS FOR CAS1NG PIPES Dimcnsions
STAS 8956-1971 CIRCULAR SCREWING DIES FOR GAS-PIPE THREAD WITHOUT THREAD TIGHTENING Dimensions

Ente Nazionale Italiano di Unificazione

UNI EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Dimensions, tolerances and designation
UNI ISO 2904:1978 ISO trapezoidal metric thread. Nominal size
UNI 4535-1964 Triangular ISO metric thread. Nominal size
UNI EN 20225:1992 Fasteners. Bolts, screws, studs and nuts. Symbols and designations of dimensions.
UNI ISO 7-1:2003 Pipe threads where pressure-tight joints are made on the threads - Dimensions, tolerances and designation
UNI 4535-P:1960 ISO Metric Triangular Profile Threads Nominal Sizes
UNI ISO 7-1:1984 Pipe threads where pressure-tight joints are made on the threads. Designation, dimensions and tolerances.
UNI EN 10226-2:2006 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
UNI EN 10226-1:2006 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation

German Institute for Standardization

DIN 30295-1:1973-05 Rounded Trapezoidal Threads; Nominal Dimensions
DIN 103-4:1977-04 ISO Metric Trapezoidal Screw Thread; Nominal Dimensions
DIN 406-2:1968 Dimensions
DIN 103-4:1971 ISO Metric Trapezoidal Screw Thread; Nominal Dimensions
DIN 14-2:1987 ISO-metric screw thread; screw threads below 1 mm diameter; nominal dimensions
DIN 103-4:1977 ISO Metric Trapezoidal Screw Thread; Nominal Dimensions
DIN 405-1-75 Tapered thread nominal size thread series
DIN 13-1:1986 ISO general purpose metric screw threads - Part 1: Nominal sizes for coarse pitch threads; nominal diameter from 1 mm to 68 mm
DIN 14-2:1987-02 ISO-metric screw thread; screw threads below 1 mm diameter; nominal dimensions
DIN 103-7:1972 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 8 to 100 mm Nominal Diameter
DIN 13-1 ISO general purpose metric screw threads - Part 1: Nominal sizes for coarse pitch threads; nominal diameter from 1 mm to 68 mm
DIN 13-1 E:1996-01 ISO general purpose metric screw threads - Part 1: Nominal sizes for coarse pitch threads; nominal diameter from 1 mm to 68 mm
DIN 103-5:1972 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 8 to 100 mm Nominal Diameter
DIN 13-1:1999 ISO general purpose metric screw threads - Part 1: Nominal sizes for coarse pitch threads; nominal diameter from 1 mm to 68 mm
DIN 405-1:1997 General purpose knuckle threads - Part 1: Profiles, nominal sizes
DIN 103-6:1972 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 105 to 300 mm Nominal Diameter
DIN 13-8:1999-11 ISO general purpose metric screw threads - Part 8: Nominal sizes for 3 mm fine pitch threads; nominal diameter from 28 mm to 300 mm
DIN 103-8:1972 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 105 to 300 mm Nominal Diameter
DIN 13-3:1999-11 ISO general purpose metric screw threads - Part 3: Nominal sizes for 0,5 mm fine pitch threads; nominal diameter from 3,5 mm to 90 mm
DIN 336-1:1969 Drilling and threading tool size
DIN 406-3 Supplement 1:1978 Dimensioning in drawings - Dimensioning by co-ordinates, co-ordinates for hole circles
DIN 13-7:1999-11 ISO general purpose metric screw threads - Part 7: Nominal sizes for 2 mm fine pitch threads; nominal diameter from 17 mm to 300 mm
DIN 852-1:1991 Bore type thread milling cutters for ISO metric threads; dimensions
DIN 13-6:1999-11 ISO general purpose metric screw threads - Part 6: Nominal sizes for 1,5 mm fine pitch threads; nominal diameter from 12 mm to 300 mm
DIN 13-4:1999-11 ISO general purpose metric screw threads - Part 4: Nominal sizes for 0,75 mm fine pitch threads; nominal diameter from 5 mm to 110 mm
DIN 13-7 Berichtigung 1:2019-08 ISO general purpose metric screw threads - Part 7: Nominal sizes for 2 mm fine pitch threads; Nominal diameter from 17 mm to 300 mm; Corrigendum 1
DIN 13-8:1999 ISO general purpose metric screw threads - Part 8: Nominal sizes for 3 mm fine pitch threads; nominal diameter from 28 mm to 300 mm
DIN 13-9:1999 ISO general purpose metric screw threads - Part 9: Nominal sizes for 4 mm fine pitch threads; nominal diameter from 40 mm to 300 mm
DIN 406-12:1992 Engineering drawing practice; dimensioning; tolerancing of linear and angular dimensions (modified version of ISO 406:1987)
DIN 40430:1971 Steel Conduit Thread; Dimensions
DIN 20401:2004-12 Buttress threads - 0,8 mm to 2 mm pitch - Dimensions
DIN 13-10:1999 ISO general purpose metric screw threads - Part 10: Nominal sizes for 6 mm fine pitch threads; nominal diameter from 70 mm to 500 mm
DIN 13-3:1999 ISO general purpose metric screw threads - Part 3: Nominal sizes for 0,5 mm fine pitch threads; nominal diameter from 3,5 mm to 90 mm
DIN 13-6:1999 ISO general purpose metric screw threads - Part 6: Nominal sizes for 1,5 mm fine pitch threads; nominal diameter from 12 mm to 300 mm
DIN 158-1:1997-06 Metric external taper screw threads and mating internal parallel screw threads - Part 1: Nominal sizes, limit deviations, limits of size and verification
DIN 13-4:1999 ISO general purpose metric screw threads - Part 4: Nominal sizes for 0,75 mm fine pitch threads; nominal diameter from 5 mm to 110 mm
DIN 1893-1:1978 Disc type thread milling cutters for ISO metric trapezoidal threads; dimensions
DIN 264-1:1973-05 Round Screw Thread with Clearance and Flat Flank with Pitch 7 mm; Nominal Dimensions
DIN 13-11:1999-11 ISO general purpose metric screw threads - Part 11: Nominal sizes for 8 mm fine pitch threads; nominal diameter from 130 mm to 1000 mm
DIN 13-9:1999-11 ISO general purpose metric screw threads - Part 9: Nominal sizes for 4 mm fine pitch threads; nominal diameter from 40 mm to 300 mm
DIN ISO 228-1:2001-04 Pipe threads for non-threaded sealing connections Part 1: Dimensions, tolerances and marking
DIN 2510-2:2025-04 Bolted connections with waisted shank - Part 2: Metric thread with large clearance - Nominal dimensions and limits of size
DIN 13-5:1999 ISO general purpose metric screw threads - Part 5: Nominal sizes for 1 mm and 1,25 mm fine pitch threads; nominal diameter from 7,5 mm to 200 mm
DIN 13-7:1999 ISO general purpose metric screw threads - Part 7: Nominal sizes for 2 mm fine pitch threads; nominal diameter from 17 mm to 300 mm
DIN 3858:2005 Whitworth pipe threads for pipe unions - Parallel internal thread and taper external thread - Dimensions
DIN EN ISO 228-1 Bb.1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation; Limits of size
DIN 852-1:1991-09 Bore type thread milling cutters for ISO metric threads; dimensions
DIN 20401:2004 Buttress threads - 0,8 mm to 2 mm pitch - Dimensions
DIN 262-1:1973-05 Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm; Nominal Dimensions
DIN 3858:1970 Whitworth pipe threads for pipe couplings; parallel internal threads and taper external threads; thread dimensions
DIN 13-10:1999-11 ISO general purpose metric screw threads - Part 10: Nominal sizes for 6 mm fine pitch threads; nominal diameter from 70 mm to 500 mm
DIN 2510-2:2023-05 Bolted connections with waisted shank - Part 2: Metric thread with large clearance - Nominal dimensions and limits of size / Note: Date of issue 2023-03-31*Intended as replacement for DIN 2510-2 (1971-08).
DIN 2510-2:1971 Bolted Connections with Reduced Shank; Metric Thread with Large Clearence, Nominal Dimensions and Limits
DIN 2999-1:1983 Pipe threads for tubes and fittings; parallel internal thread and taper external thread; tread dimensions
DIN 13-2:1999 ISO general purpose metric screw threads - Part 2: Nominal sizes for 0,2 mm, 0,25 mm and 0,35 mm fine pitch threads; nominal diameter from 1 mm to 50 mm
DIN 168-1:1998 Glass container knuckle thread finishes - Thread sizes
DIN 14-4:1987 ISO-metric screw thread; screw threads below 1 mm diameter; limits
DIN 13-2 E:1996-01 ISO general purpose metric screw threads - Part 2: Nominal sizes for 0,2 mm, 0,25 mm and 0,35 mm fine pitch threads; nominal diameter from 1 mm to 50 mm
DIN 259-1:1966 Whitworth pipe threads; parallel internal and parallel external threads, basic sizes
DIN 28178:2009-05 Swirled corrugated tubes - Dimensions and materials
DIN 3858:1988 Whitworth pipe threads for pipe couplings; parallel internal threads and taper external threads; thread dimensions
DIN 13-2:1986 ISO general purpose metric screw threads - Part 2: Nominal sizes for 0,2 mm, 0,25 mm and 0,35 mm fine pitch threads; nominal diameter from 1 mm to 50 mm
DIN 158-2 E:1963 Draft Document - Metric taper threads cones 1:16 - Thread limit dimensions
DIN 262-1:1973 Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm; Nominal Dimensions
DIN 158-2 E:1963-02 Draft Document - Metric taper threads cones 1:16 - Thread limit dimensions

U.S. Military Regulations and Norms

FED-STD-H28 6A(1) NOT 1 Unified thread size standards

Belgian Standards Institute

NBN 507-F-1966 Screws; nuts; bolts definitions, terms, dimensions and names

Cuban Institute of Standards and Metrology

NC 02-07-1968 Dimensioning
NC 02-19-1968 Dimensioning and tolerancing of profiles
NC 16-16-1986 Interchangeability Basic Standards. Thread in Inches. Profile and Main Dimensions

Polski Komitet Normalizacyjny (PKN)

PN M02019-1988 Buttress screw threads Dimensions
PN G53033-1966 Gauges for casing threads
PN E02502-1970 Threads for s?eel conduit pipes Dimensions
PN M55336-1989 Machines tools hread machines izes
PN G02040-1966 Core drilling Line-pipe threads Dimensions
PN G02047-1968 Percussion drilling Tool threads Dimensions

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NASM33537-2002 Insert, Screw Thread, Helical Coil, Inch Series, Coarse and Fine Thread, Standard Assembly Dimensions for FSC 5340
AIA/NAS NASM33537-2009 INSERT, SCREW THREAD, HELICAL COIL, INCH SERIES, COARSE AND FINE THREAD, STANDARD ASSEMBLY DIMENSIONS FOR Rev 1
NASM33537-2002 Insert@ Screw Thread@ Helical Coil@ Inch Series@ Coarse and Fine Thread@ Standard Assembly Dimensions for
AIA/NAS NAS932-2012 DRILLS -THREADED HEXAGONAL SHANK SIZES

GCC Standardization Organization

BH GSO ASTM B302:2024 Standard Specification for Threadless Copper Pipe, Standard Sizes
GSO ISO 7852:2013 Earth-moving machinery -- Plough bolt heads -- Shapes and dimensions (excluding thread dimensions)
GSO ISO 262:2008 ISO general-purpose metric screw threads – Selected sizes for screws, bolts and nuts
GSO ISO 2284:2015 Hand taps for parallel and taper pipe threads -- General dimensions and marking
GSO ISO 724:2008 ISO general-purpose metric screw threads – Basic dimensions
GSO ISO 4417:2016 Size designation of clothes -- Headwear

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 5705-1993 Dimensioning
TCVN 2248-1977 Metric screw threads.Basic dimensions

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ASTM B302:2009 Standard Specification for Threadless Copper Pipe, Standard Sizes
OS GSO ISO 725:2013 ISO inch screw threads -- Basic dimensions
OS GSO ISO 7852:2013 Earth-moving machinery -- Plough bolt heads -- Shapes and dimensions (excluding thread dimensions)
OS GSO ISO 4417:2016 Size designation of clothes -- Headwear

American National Standards Institute （ANSI)

ANSI/ASME B1.30-2002 Screw Threads: Standard Practice for Calculating and Rounding Dimensions
ANSI/ASME Y14.5M-1994 Dimensioning and Tolerancing

Society of Automotive Engineers (SAE)

SAE AS1708A-1992 FITTING END, FLARED, FEMALE, STANDARD DIMENSIONS FOR
SAE AS1708-1982 FITTING END, FLARED, FEMALE, STANDARD DIMENSIONS FOR
SAE AS757-1963 BOSS@ STRAIGHT THREAD GASKET SEAL STANDARD DIMENSION FOR
SAE AS4320 Fitting End, Straight Thread, Standard Dimensions For, Design Standard
SAE AS4320-2007 FITTING END, STRAIGHT THREAD, STANDARD DIMENSIONS FOR, DESIGN STANDARD
SAE AS4320-2015 FITTING END, STRAIGHT THREAD, STANDARD DIMENSIONS FOR, DESIGN STANDARD
SAE AS757-2002 Boss, Straight Thread Gasket Seal, Standard Dimensions For
SAE AS4320-1993 Fitting End@ Straight Thread@ Standard Dimensions for@ Design Standard (FSC 4730)
SAE AS757 Boss, Straight Thread Gasket Seal, Standard Dimensions For
SAE MA1567B-2018 Insert, Screw Thread, Helical Coil Metric Series, Standard Assembly Dimensions For
SAE MA1567B-1996 Insert, Screw Thread, Helical Coil Metric Series, Standard Assembly Dimensions For
SAE MA1567C-2019 Insert@ Screw Thread@ Helical Coil Metric Series@ Standard Assembly Dimensions for
SAE AS85421/1A-2022 FITTING END, STANDARD DIMENSIONS FOR DYNAMIC BEAM SEAL, MALE
SAE AS85421/1-2015 FITTING END, STANDARD DIMENSIONS FOR DYNAMIC BEAM SEAL, MALE
SAE AS85421/1-2002 FITTING END@ STANDARD DIMENSIONS FOR DYNAMIC BEAM SEAL@ MALE

Korean Agency for Technology and Standards (KATS)

KS M 6591-1979 Standard size of screw for rubber extruder
KS B 1006-2016(2021) Hole Sizes Before Threading
KS B 1006-2016 Hole Sizes Before Threading
KS B ISO 228-1:2007 Pipe threads where pressure － tight joints are not made on the threads － Part 1: Dimensions, tolerances and designation
KS B ISO 7852-2014(2019) Earth-moving machinery — Plough bolt heads — Shapes and dimensions(excluding thread dimensions)
KS B 0245-1987 Thread Run-Outs and Thread Undercuts for External Threaded Fasteners
KS B ISO 7852-2014(2024) Earth-moving machinery — Plough bolt heads — Shapes and dimensions(excluding thread dimensions)
KS B ISO 7852:2004 Earth-moving machinery-Plough bolt heads-Shapes and dimensions(excluding thread dimensions)
KS B ISO 7852:2014 Earth-moving machinery — Plough bolt heads — Shapes and dimensions(excluding thread dimensions)
KS B 0236-1989 Permissible Deviation in Dimensions without Tolerance Indication of dimensions
KS B ISO 7852-2019 Earth-moving machinery — Plough bolt heads — Shapes and dimensions(excluding thread dimensions)

American Society for Testing and Materials (ASTM)

ASTM B302-00 Standard Specification for Threadless Copper Pipe, Standard Sizes
ASTM B302-17 Standard Specification for Threadless Copper Pipe, Standard Sizes
ASTM B302-12 Standard Specification for Threadless Copper Pipe, Standard Sizes
ASTM B302-07 Standard Specification for Threadless Copper Pipe, Standard Sizes
ASTM B302-02 Standard Specification for Threadless Copper Pipe, Standard Sizes

Bureau of Indian Standards

IS 4695 Pt.1-1988 Specification for joint screw threads Part 1 Thread form and nominal dimensions
IS 5957-1989 Threads for self-tapping screws—dimensions
IS 4694-1968 Basic dimensions of square thread
IS 4696 Pt.3-1976 Serrated Thread Dimensions Part III Basic Dimensions
IS 4206-1967 Dimensions of nominal length and thread length of bolts, screws and studs
IS 2540-1963 Thread center hole size
IS 4695-1968 Basic dimensions of joint threads
IS 7800-1975 Thread and end dimensions of self-tapping screws
IS 886-1957 Dimensions for screw threads (below 6 mm)
IS 1369-1982 Dimensions of screw thread runout and undercuts
IS 2643 Pt.3-1975 Dimensions of pipe threads for fastening Part III Dimensional limitations
IS 3333-3-1967 Dimensions for petroleum industry pipe threads: Part 3 Tubing round threads
IS 3333 Pt.1-1967 Petroleum Industry Pipe Thread Dimensions Part Ⅰ Line Pipe Threads
IS 3333 Pt.3-1967 Pipe Thread Dimensions for the Petroleum Industry Part III Oil Pipe Round Threads
IS 3949-1971 Laryngoscope lamp dimensions and threads
IS 3333-2-1967 Dimensions for petroleum industry pipe threads: Part 2 Casing round threads
IS 7800-1990 Thread cutting tapping screw - Screw threads and ends - Dimensions (First Revision)
IS 554-1975 Dimensions of pipe threads requiring pressure-tight fittings on threads

Austrian Standards

ONORM M 2012-1983 Tapped holes and screwed plugs with metric pipe thread, fine, for pipe unions, jitüngs and screw plugs; design dimensions
ONORM M 1505-1974 ISO metric screw thread; fine series with 0,35 mm pitch; nominal dimensions
ONORM ISO 7 Teil.1:1984 Pipe threads where pressure-tight joints are made on the threads; Designation, dimensions and tolerances
ONORM ISO 228 Teil.1:1982 Pipe threads where pressure-tight joints are not made on the threads; Designation, dimensions and tolerances
ONORM M 1501-1997 ISO metric screw thread - Coarse pitch threads and fine pitch threads - Nominal diameter from 1 mm to 1000 mm - Basic profil and nominal sizes
ONORM A 6065-5-1992 Technical drawings — Dimensioning for general application — Dimensioning by coordinates

Gosstandart of Russia

GOST 16868-1971 Threaded spindel ends. Dimensions
GOST 6728-1991 Thred-grinding machines. Main parameters and dimensions
GOST 3469-1991 Mikroscopes. Screw threads for objectives. Dimensions

Argentine Institute of Standardization

IRAM 5244-1961 Thread dimensions and thread ends of traction screws
IRAM 5133-1959 Dimensions of threaded spindle crankneck

Türk Standardları Enstitüsü

TS 61-1978 Screvv Threads (Shabes And Dimensions)

Magyar Szabványügyi Testület

MSZ 884/1-1987 Thread shape and size
MSZ 884/2-1987 Threaded T-piece shapes and dimensions

Finnish Standards Institute

SFS B.1.41-1957 Unified-karkeakierteet(UNC-kierteet)Nimellismitat 1/4 in ... 4 in

Japanese Industrial Standards Committee (JISC)

JIS B 0143:1985 Symbols and designations of dimensions for threaded fasteners
JIS B 1004:2009 Hole sizes before threading
JIS B 1007:1987 Threads and thread ends for tapping screws
JIS C 2515:1963 Dimensions for screw cores made of ferromagnetic oxides

American Society of Mechanical Engineers (ASME)

ASME B1.30M-1992 Screw threads - Standard practice for calculating and rounding dimensions
ASME B1.30-2002(R2022) Screw Threads: Standard Practice for Calculating and Rounding Dimensions
ASME B1.30-2002 Screw Threads: Standard Practice for Calculating and Rounding Dimensions
ASME B1.30-1992 Screw Threads - Standard Practice for Calculating and Rounding Dimensions
ASME B1.30-2024 Screw Threads: Standard Practice for Calculating and Rounding Dimensions
ASME Y14.5M-1994(R2004) Dimensioning and Tolerancing
ASME Y14.5M-1982(R1988) Dimensioning and Tolerancing
ASME Y14.5-2018(R2024) Dimensioning and Tolerancing
ASME B94.9-2008(R2013) Thread Drills: Grinding vs. Cutting Threads Appendix (Imperial and Metric Sizes)
ASME Y14.31-2014(R2019) Undimensioned Drawings

Defense Logistics Agency

DLA AND10050 REV 21-2005 BOSSES, STANDARD DIMENSIONS FOR GASKET SEAL STRAIGHT THREAD
DLA AND10050 REV 21 VALID NOTICE 1-2012 Bosses, Standard Dimensions for Gasket Seal Straight Thread

Association Francaise de Normalisation

NF E03-004-1*NF EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1 : taper external threads and parallel internal threads - Dimensions, tolerances and designation.
NF F00-016:1992 Railway equipment in general - Round threads - Dimensions and tolerances
NF L05-220:1990 Aircraft and aerospace. ISO M thread. Profiles, dimensions and designation.
NF E03-014*NF ISO 262:1999 ISO general purpose metric screw threads. Selected sizes for screws, bolts and nuts.

British Standards Institution (BSI)

BS EN ISO 8559-2:2025 Size designation of clothes - Primary and secondary dimension indicators
BS 5592:1978 Size designation of clothes - headwear

Czech Standards Institute (UNMZ)

CSN 01 3010-1962 Representation and dimensioning of threads, bolts and nuts
CSN 22 3074-1978 Nut taps for metric threads. Basic dimensions
CSN 22 3381-1987 Shell-type thread milling cutters for internal metric threads. Basic dimensions
CSN 22 3380-1987 Shell — type thread milling cutters for the external metric threads Basic dinicnsions
CSN 22 3376-1987 Thread milling cutters with tapered shank for internal metric threads. Basic dimensions
CSN 22 3380-1989 Threading tools. Shell type outside metric thread milling cutters. Basic dimensions
CSN 22 3374-1987 Thread milling cutters with a tapered shank for external metric threads. Basic dimensions
CSN ISO 9407:1994 Shoe size - sizing and marking. Mondopoint system

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 725:2016 ISO inch screw threads -- Basic dimensions
BH GSO ISO 7852:2016 Earth-moving machinery -- Plough bolt heads -- Shapes and dimensions (excluding thread dimensions)
BH GSO ISO 4417:2017 Size designation of clothes -- Headwear

Netherlands Institute for Standardization

NEN 81-1982 ISO Metric screw thread - Coarse pitch - Basic dimensions

Yugoslav Association for Standardization

JUS K.D2.130-1990 Shell type thread milling cutters for JSO metric threads; dimensions

Bureau of Philippine Standards

PNS ISO 7852:2021 Earth-moving machinery - Plough bolt heads - Shapes and dimensions (excluding thread dimensions)

European Committee for Standardization (CEN)

EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation ISO 228-1: 2000

Spanish Association for Standardization (UNE)

UNE 115244:2005 Earth-moving machinery. Plough bolt heads. Shapes and dimensions (excluding thread dimensions)

Standards Norway

NS 1074-2:1971 Metric screw threads — ISO profile — Limits of sizes for commercial bolts and nut threads
NS 1411:1972 Engineering drawings — Inscription of dimensions
NS 1412:1973 Engineering drawings — Dimensioning

South African Bureau of Standard

SANS 1700-2-11:1996 Fasteners.Part 2:Screw threads.Section 11:ISO inch screw threads.Basic dimensions

Tanzania Bureau of Standards

TZS 171-1983 Tanzania Standard ISO General purpose metric screw threads — Tolerances: Limits of sizes for commercial bolt and nut threads — Medium quality

Standard Association of Australia （SAA）

AS ISO 7852:2021 Earth-moving machinery — Plough bolt heads — Shapes and dimensions (excluding thread dimensions)
AS B53:1939 Pipe threads. Basic sizes and tolerances

Indonesia Standards

SNI 05-2961-1992 Gambar teknik - Penulisan ukuran

Thai Industrial Standards Institute (TISI)

TIS 159-1975 Standard for general purpose iso metric screw threads and selected sizes for screws, bolts and nuts