Injection ratio

Injection ratio, Total:134 items.

The international standard classification for "Injection ratio" includes: Sensory analysis , Properties of surfaces , Manufacturing forming processes , Solid fuels , Other standards related to optics and optical measurements .

The Chinese standard classification for "Injection ratio" includes: Basic standards and general methods , Basic standards and general methods , Casting , Chrome ore , Basic standards and general methods on chemical fertilizers , Semimetal and semiconductor material analysis method , Beverages in general , Cereal crop and forage crop in general , Grease and oil processing and products , Rubber products in general , Basic standards and general methods , Basic standards and general methods , Petroleum products in general , Basic standard and general method , Length Measurement , Composite materials and solid fuels , Chemical fibre , chromatograph .

国家医药管理局

YY/T 0088-1992 Microsampler

Professional Standard - Medicine

YY 0088-1992 Electrophoresis device

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 29604-2013 Sensory analysis—General guidance for establishing references for sensory attributes
GB/T 14495-1993 Roughness comparison specimens for wooden pieces
GB/T 6060.1-1997 Roughness comparison specimens - Cast surfaces

Professional Standard - Commodity Inspection

SN/T 0918-2000 Method for the sampling of tea for import and export
SN/T 0975-2000 Method for sampling of petroleum and liquid petroleum products for import and export(automatic sampling)
SN/T 0736.1-2012 Inspection for import and export fertilizers. Part 1: Sampling and sample preparation
SN/T 0835-1999 Method for the sampling of pesticides for import and export
SN/T 0736.1-1997 Method of inspection for import and export fertilizers - Sampling and sample preparation
SN/T 0801.8-1999 Animal and vegetable oils and fats for import and export. Method for the determination of specific gravity
SN 0066-1992 Method for samplling and sample preparation of chrome ores in bulk for import
SN/T 0800.1-2016 Inspection of cereals|| oils and feedstuffs for import and export - Methods of sampling and preparation of samples
SN/T 4111-2015 Methods for sampling and preparing sample of copper ores for import
SN/T 0800.1-1999 Inspection of cereals oils and feedstuffs for import and export - Methods of sampling and preparation of samples
SN/T 1099-2002 Method for the sampling of fabric inspection for import and export
SN/T 0826-1999 Method for sampling of petroleum and liquid petroleum products for import and export (manual sampling)
SN/T 1039-2002 Method for the sampling and sample preparation of silicon carbide packed in metricton bags for import and export
SN/T 3357-2012 Methods for sampling and sample preparation of copper concentrates in bulk for import
SN/T 0067-2012 Mechanical method for sampling and sample preparation of coal for import and export
SN/T 0066-2015 Methods for sampling and sample preparation of chrome ores in bulk for import
SN/T 1323-2003 Rules for the sampling of metal material for import and export
SN/T 0541.1-1996 Inspecting method for import and export standard rubber―Sampling and test-sample preparation
SN/T 3912.3-2014 Determination of mercury content in imported condensate - Direct injection method
SN/T 2500-2010 Rules for inspection of wood products and furniture for import and export—Sampling and sample preparation

未注明发布机构

DIN 55981:2022-04 Determination of relative hue of near white specimens
DIN 55980:2022-04 Determination of hue of near white specimens
DIN EN 13205-5 E:2012-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces
DIN 55980 E:2021-11 Determination of hue of near white specimens
DIN 55981 E:2021-11 Determination of relative hue of near white specimens

National Metrological Verification Regulations of the People's Republic of China

JJG 1147-2018 Charpy V-notch Reference Test Pieces

海关总署

SN/T 1039-2020 Method for the sampling and sample preparation of silicon carbide-Packed in metricton bags for import and export

Taiwan Provincial Standard of the People's Republic of China

CNS 9917-1983 Practice for Comparison of Spray Patterns of Aerosol Products
CNS 12382-2006 Method of test for the California Bearing Ratio (CBR)
CNS 12382-1988 Method of Test for California Bearing Ratio of Compacted Soil

National Metrological Technical Specifications of the People's Republic of China

JJF 1099-2018 Calibration Specification for Roughness Comparison Specimens
JJF 1099-2003 Calibration Specification of Roughness Comparison Specimens

Group Standards of the People's Republic of China

T/NAIA 0190-2023 Microsampler Evaluation Test Specification
T/SXCAA 016-2022 Sampling method of soil columnar sample Double-pipe direct-push drilling method

Professional Standard - Aerospace

QJ 3228-2005 Test method for Poissons ratio of composite solid propellant
QJ 2275-1992 Determination Method for Specific Heat of Composite Solid Propellant

Professional Standard - Agriculture

SN/T 0464-1995 Determination method of composition analysis for import and export covered spandex
SN/T 2108-2023 Determination of barbiturates in cosmetics for import and export

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38125-2019 Autosampler for liquid chromatography

工业和信息化部

QC/T 520-2019 Sample scaling test method for automotive friction material

Military Standard of the People's Republic of China-General Armament Department

GJB/J 3346-1998 Calibration procedures for solid propellant specific impulse test systems

RO-ASRO

STAS 7948/6-1975 INORGANIC PIGMENTS Determination of colour by comparing with the colour standard sample
STAS 7087-1982 ROUGIINESS COMPAR ISONSPEGIMENS
STAS SR 11499-1-1997 Sugar - Sampling and preparation of samples for microbiological analysis

Association Francaise de Normalisation

NF ISO 39511:2018 Progressive sampling plans for control by measurement of the percentages of non-compliants (known standard deviation)
NF X06-069:1990 Application of statistics - Comparison of a proportion to a given value
NF X08-013:1984 Colours. Preparation of painted colorimetric test pieces.
NF EN ISO 7213:2021 Pâtes - Echantillonnage pour essais
NF X20-304:1974 GAS ANALYSIS BY A CONTINUOUS COULOMETRIC METHOD.
NF X43-283-5*NF EN 13205-5:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5 : aerosol sampler performance test and sampler comparison carried out at workplaces
NF T50-062:1995 PLASTICS. ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA. (EUROPEAN STANDARD EN ISO 10350).
NF V37-023:1983 Identical sample preparation and composition? Same Batch (Practical Code for Conducting Comparative Tests Relevant to the Quality of Test Methods)
NF EN 27023:1993 Packaging - Bags - Method for sampling empty bags for testing
NF EN 28050:1992 Ferro-nickel en lingots ou en morceaux - Échantillonnage pour analyse.
NF X31-100:2020 Soil quality - Sampling - Method for taking soil samples for physico-chemical analyzes for agronomic interpretation

PL-PKN

PN C04586-11-1990 Water and waste water Tests for iron Determination of dissolve iron by semi-quantitative method with colorimetric test

Korean Agency for Technology and Standards (KATS)

KS B 0507-2016 Roughness Comparison Specimens
KS Q ISO 39511:2020 Sequential sampling plans for inspection by variables for percent nonconforming(known standard deviation)
KS M 1067-2007 Determination of hexavalent chromium by colorimetric method/spot test
KS B 5544-2003 Metallic materials－Charpy pendulum impact test－Part 3：Preparation andcharacterization of Charpy V reference test pieces for verification of test machines
KS P 2094-2020 Protocol for measurement procedures comparison and bias estimation using patient samples in in-vitro diagnostic medical laboratory

PT-IPQ

NP 3167-1986 ceramic tile. Take a sample
NP 1610-1987 Essential oils. Taking samples and then analyzing them

CL-INN

INDITECNOR 5-3ch Randomly sample samples

KR-KS

KS Q ISO 8423-2015 Sequential sampling plans for inspection by variables for percent nonconforming(known standard deviation)
KS Q ISO 39511-2020 Sequential sampling plans for inspection by variables for percent nonconforming(known standard deviation)

SCC

BS 6002-4.1:1994 Sampling procedures for inspection by variables. Specification for sequential sampling plans for percent nonconforming.-Known standard deviation
BS 2634-3:1967 Specification for roughness comparison specimens. Specimens representing milled surfaces
DANSK DS/EN 27213:1993 Pulps – Sampling for testing
DANSK DS/ISO 7213:1993 Pulps – Sampling for testing
DANSK DS/EN ISO 8049:2016 Ferronickel shot – Sampling for analysis
BS 2634-3:1980 Specification for roughness comparison specimens-Cast surfaces
BS 2634-2:1964 Specification for roughness comparison specimens. Specimens representing turned and bored surfaces
NS-EN 14011:2003 Water quality — Sampling of fish with electricity
DANSK DS/EN 14011:2003 Water quality - Sampling of fish with electricity
AS B196.2:1966 Specification for roughness comparison specimens - Specimens representing turned and bored surfaces
NS-EN 13205-5:2014 Workplace exposure — Assessment of sampler performance for measurement of airborne particle concentrations — Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces
DANSK DS/EN 13205-5:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces
DIN EN 13205-5 E:2012 Draft Document - Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces; German version prEN 13205-5
BS 2634-1:1970 Specification for roughness comparison specimens. Specimens representing ground flat and cylindrical surfaces
12/30259174 DC BS EN 13205-5. Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Part 5. Aerosol sampler performance test and sampler comparison carried out at workplaces
AS 2721:1984 Wool - Method for subsampling of staples from grab samples
AWWA MTC69725 Comparison of Membrane Operation for Three of the World's Largest Advanced Water Treatment Plants
AWWA MTC95006 Making a Sale of Water in the Caribbean Work

ZA-SANS

SANS 10380:2003 Procedures for sampling vegetation according to scale

GSO

GSO ISO 6978-2:2011 Natural gas - Determination of mercury - Part 2: Sampling of mercury by amalgamation on gold/platinum alloy
GSO ISO 8049:2015 Ferronickel shot -- Sampling for analysis

Japanese Industrial Standards Committee (JISC)

JIS B 0659:1996 Roughness comparison specimens
JIS B 9622:2000 Graphic technology -- Application of reflection densitometry and colorimetry to process control or evaluation of prints and proofs

Standard Association of Australia （SAA）

AS 2382:1981 Surface roughness comparison specimens

British Standards Institution (BSI)

BS PD CLC/TR 50619:2014 Guidance on how to conduct Round Robin Tests
BS EN 13205-5:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Aerosol sampler performance test and sampler comparison carried out at workplaces
BS 2634-1:2010 Roughness comparison specimens. Part 1: Specification for turned, ground, bored, milled, shaped and planed specimens
BS 2634-1:1987 Roughness comparison specimens. Specification for turned, ground, bored, milled, shaped and planed specimens
BS EN 14011:2003 Water quality. Sampling of fish with electricity

American Society for Testing and Materials (ASTM)

ASTM D6538-12(2019) Standard Guide for Sampling Wastewater With Automatic Samplers
ASTM D6538-00(2005) Standard Guide for Sampling Wastewater With Automatic Samplers
ASTM D6538-12 Standard Guide for Sampling Wastewater With Automatic Samplers
ASTM D6538-00 Standard Guide for Sampling Wastewater With Automatic Samplers
ASTM E1253-21 Standard Guide for Reconstitution of Charpy-Sized Specimens

AT-ON

ONORM M 1118-1986 Technical surjaces; roughness comparison specimens

German Institute for Standardization

DIN 55980:1979 Determination of hue of near white specimens
DIN EN 13205-5:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces; German version EN 13205-5:2014
DIN EN 14011:2003-07 Water quality - Sampling of fish with electricity; German version EN 14011:2003
DIN 55981:1979 Determination of relative hue of near white specimens

NL-NEN

NEN 3636-1980 Surface roughness - Roughness comparison specimens

TR-TSE

TS 3496-1980 DETERMINATION OF SPECIFIC SURFACE AREA OF POWDERED ORE SAMPLES

YU-JUS

JUS M.A1.043-1982 Roughness camparison specimens — Gast surfaces

IT-UNI

UNSIDER 32-1960 Quality inspection. Consumption comparison between two samples (comparison of two changes)

CZ-CSN

CSN 01 0254-1974 Sampling inspection by attributes
CSN 25 2302-1980 Surface roughness comparison specimens. echnical requirements
CSN 01 0258-1981 Sainpling inspection by variables
CSN 68 4120-1979 Determination of cooper as impurity y colorimetric methods
CSN 01 0259-1980 Sampling inspection by attributes. Sequential sampling plans

GOST

GOST R 70378.5-2023 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Part 5. Aerosol sampler performance test and sampler comparison carried out at workplaces

RU-GOST R

GOST 19296-1973 Petroleum oils. Test for soda reaction from petroleum oils. Photoelectric colorimeter method
GOST 10554-1974 Reagents. Determination of copper with colorimetric methods

Danish Standards Foundation

DS 2184:1982 Sampling procedures and tables for inspection by attributes
DS/ISO 2632/3:1981 Roughness comparison specimens. Part 3: Cast surfaces

The American Road & Transportation Builders Association

AASHTO R 60M/R 60-2023 Sampling Freshly Mixed Concrete

BE-NBN

NBN E 18-001-1976 Calibration by comparison of thermocouples
NBN 544-1959 Classification of Belgian softwoods based on appearance
NBN I-1008-1969 Edible fats and oils, volume measurement, measured by the pycnometer method

AENOR

UNE-EN 13205-5:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces
UNE 82305-3:1991 ROUGHNESS COMPARISON SPECIMENS. PART 3: CAST SURFACES.

Society of Automotive Engineers (SAE)

SAE AIR852-2002 METHODS OF COMPARING AIRCRAFT TAKEOFF AND APPROACH NOISES

SAE - SAE International

SAE AIR852-1965 METHODS OF COMPARING AIRCRAFT TAKEOFF AND APPROACH NOISES

HU-MSZT

MSZ 9650/10-1976 Powder paint inspection, color comparison by eye

International Organization for Standardization (ISO)

ISO 2632-3:1979 Roughness comparison specimens — Part 3: Cast surfaces

Others: Injection ratio,sample injection,Injection process,Injection pump,manual injection,Sampling device,Boat sampling,Injection cell,Sample loop,Sample loop,sample injector,How much liquid phase injection,Sample injection,Gas phase sampling method,Automatic injection Manual injection,Autosampling injection volume,Sample injection volume,How much is HPLC injected,Injection Injection