Liquidity tester

Liquidity tester, Total:298 items.

The international standard classification for "Liquidity tester" includes: Physicochemical methods of analysis , Measurement of electrical and magnetic quantities , Diagnostic, maintenance and test equipment , Plastics in general , Enamels , Raw materials , food products in general , Flow in closed conduits , Non-destructive testing , Metrology and measurement in general , Exploratory and extraction equipment , Electricity. Magnetism. General aspects , Road vehicle systems , Power stations in general , Cement. Gypsum. Lime. Mortar , Electricity. Magnetism. Electrical and magnetic measurements , Hydraulic construction .

The Chinese standard classification for "Liquidity tester" includes: Basic standards and general methods , Electrical instrument and meter in general , Instruments and test devices for vehicle , Basic standards and general methods for synthetic resin and plastic , Daily use enamel products , Building sanitary ceramics , Grease and oil processing and products , Flow capacity and material level instrument , Electrical parametric test and power supply unit , X ray, magnetic powder, fluorescent light and other defectoscope , Industrial automation and control device in general , Petroleum drilling & production equipment and instrument , Electromagnetic Measurement , Length Measurement , AC/DC electrical instrument recording instrument , Cement , Other electronic instrument and equipment .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 25278-2010 Plastics - Determination of the fluidity of plastics using capillary and slit-die rheometers
GB/T 14614-2019 Inspection of grain and oils—Doughs rheological properties determination of wheat flour—Farinograph test
GB/T 43191-2023 On-site testing instruments of AC charging spot for electric vehicles
GB/T 14615-2019 Inspection of grain and oils—Doughs rheological properties determination of wheat flour—Extensograph test
GB/Z 44813-2024 Measurement of fluid flow in closed conduits—Effects of flow pulsations on flow-measurement instruments
GB/T 37511-2019 Inspection of grain and oils—Doughs rheological properties determination of wheat flour—Mixolab test
GB/T 28945-2012 Portable braking performance tester for vehicles
GB/T 32191-2015 Leakage current tester
GB/T 38092-2019 Vitreous and porcelain enamels—Determination of fluidity behaviour—Fusion flow test
GB/T 23460.1-2009 Test methods of ceramic glazes—Part 1:Determination of fluidity behaviour—Fusion flow test
GB/T 40244-2021 Chemicals - Liquid or solid identification - Fluidity test method

Group Standards of the People's Republic of China

T/CIET 20-2023 DC motor air tightness automatic test equipment
T/CIMA 0004-2018 Testing equipment on-site for AC charging spot of electric vehicle
T/CAS 508-2021 AOC test method based on flow cytometer
T/CSTM 00425-2023 Non-destructive testing— Steel products —Characterization and verification of automatic eddy current flaw detector
T/CMA HG105-2025 Rubber Flow Analyzer
T/QGCML 2362-2023 GIS and HGIS combined electrical and dynamic characteristics tester
T/CMA JD009-2020 Dynamic test items and methods for portable braking performance testers
T/STAX 015-2024 Laser brake performance tester for special motor vehicles in the field (factory)
T/CMA HG106-2025 Determination of fluidity of unvulcanized rubber - Rubber fluidity analyzer method
T/GDCKCJH 065-2022 Performance requirements and test methods for DC parameter testers of zinc oxide lightning arrester
T/CPQS E00063-2023 Performance requirements and test methods for household beauty care appliance Part 2: Micro current beauty care appliance

Professional Standard - Machinery

JB/T 9233.14-1999 General methods of testing the performance of industrial process measurement and control instruments Start current
JB/T 7585-2013 Tester for direct current low-resistence
JB/T 7439.2-1994 Terminology relating to laboratory instruments - Dynamic test instrument
JB/T 13939-2020 Nondestructive testing instruments - Eddy current thickness gauge
JB/T 7585-1994 D.C. Low Resistance Tester
JB/T 7480-1994 Current instrument test method
JB/T 8393-1996 Magnetic and Eddy Current Measuring Instrument for Coating Thickness
JB/T 11780-2014 Non-destructive Testing Instrument - Characterization and Verification of Array Eddy Current Testing Instrument
JB/T 5525-2011 Non-destructive testing instruments —characteristics measured method for one-channel eddy current testing instrument

Professional Standard - Petroleum

SY/T 5429-1991 Small diameter flow water content tester
SY 6703-2007 General technical specifications for core fluidity test instruments
SY/T 5429-2000 Small diameter flowrate and watercut logging tool
SY/T 6703-2007 General specifications for core flowing system

National Metrological Verification Regulations of the People's Republic of China

JJG 818-2005 Verification Regulation of Magnetic and Eddy Current Measuring Instrument for Coating Thickness
JJG(民航) 0092-2006 Verification Regulation of Eddy Current Conductivity Meter
JJG(电子) 306003-2006 Specification for verification of leakage current testers
JJG 157-2020 Dynamic Shear Rheometer
JJG 843-2007 Verification Regulation of Leakage Current Tester
JJG 1188-2022 Medical Leakage Current Testers
JJG 843-2022 Leakage Current Tester
JJG(粤) 027-2014 Touch Current Testers
JJG 1120-2015 High Voltage Switch Operation Characteristic Testers
JJG(民航) 029-1996 Verification Regulation of 4753880-503 Calibration Instrument for Fuel Flow System Line Checker
JJG(建材) 126-1999 Inspecting specification for apparatus of fluidity of cement mortar
JJG(邮电) 043-1998 Phase Jitter Tester (PDH)
JJG(机械) 75-1992 Verification Regulations for Current Density Tester
JJG(电子) 05002-1987 GY2610 Leakage Current Tester Trial Verification Regulations
JJG(交通) 096-2009 Flow Table for Determination Cement Mortar Fluidity
JJG 818-1993 Verification Regulation of Eddy Current Interferometer for Measuring Thickness

Professional Standard - Public Safety Standards

GA/T 485-2004 The protable braking performance tester for vehicles

National Metrological Technical Specifications of the People's Republic of China

JJF(机械)1017-2018 Calibration specification for motor vehicle comprehensive performance tester
JJF(机械) 026-2008 Calibration specification for current density tester
JJF 1283-2011 Calibration Specification for Residual Current Operated Protective Device Operated Characteristic Tester
JJF 1168-2007 Calibration Specification for Portable Braking Performance Tester for Motor Vehicle
JJF 1168-2024 Calibration Specification for Portable Braking Performance Testers of Vehicles
JJF 1584-2016 Calibration Specification for Current Transformer Volt--Ampere Characteristic Meters
JJF(机械) 1017-2018 Calibration specification for motor vehicle comprehensive performance tester

Professional Standard - Traffic

JT/T 757-2009 Flow Table for Determine Cement Mortar Fluidity
JT/T 838-2012 Flow time tester for fine aggregate

Taiwan Provincial Standard of the People's Republic of China

CNS 8516-1982 Method of Test for Flow Rates of Thermoplastics by Extrusion Plastometer
CNS 12395-1988 Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus

Professional Standard - Energy and Power Planning

DL/T 987-2005 General technical conditions of resistive current tester for zinc oxide surge arrester
DL/T 967-2005 Verification regulation of loop resistance tester and DC resistance high-speed tester
DL/T 1694.5-2017 Calibration suecification for high voltage testing instruments. Part 5: Resistive current testers for zinc oxide surge arrester
DL/T 826-2002 On-site testing equipment for alternating current electricity meters
DL/T 1953-2018 General technical specification of measuring instruments for capacitive current
DL/T 987-2017 General technical specifications of resistive current testers for zinc oxide surge arrester
DL/T 1694.3-2017 Calibration specification for high voltage testing instruments Part 3: High voltage switch operating characteristics tester

Professional Standard - Energy

DL/T 826-2024 AC energy meter on-site tester
DL/T 1694.11-2024 Specification for calibration of high voltage test instruments and equipment Part 11: Capacitance and current testers

Professional Standard - Building Materials

JC/T 958-2005 Flow table for determine mortar fluidity

Professional Standard - Electron

SJ/T 11383-2008 General specification of leakage current tester
SJ/T 10439-1993 Test methods for bipolar transister DC parameter testers

Professional Standard - Chemical Industry

HG/T 5893-2021 Automatic integrity test instrument for microfiltration membrane filters

Professional Standard - Aviation

HB 6136.13-1987 Flight Test Instrument (Static) Calibration Specification Flow

Professional Standard - Water Conservancy

SL 123-1995 Method for calibration of cement mortar flow tester
SL 123-2012 Calibration methods for fluidity tester of cement mortar

Professional Standard - Agriculture

LS/T 6150-2024 Grain and oil inspection - Rheological properties of wheat flour dough - Kneading instrument method

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1207-2013 Magnetic and Eddy Current Coating Thickness Gauge

Henan Provincial Standard of the People's Republic of China

DB41/T 2229-2022 Procedures for flow measurement by electric wave current meter

Military Standard of the People's Republic of China-General Armament Department

GJB 7952-2012 Measurement methods for vibratory gyros

Korean Agency for Technology and Standards (KATS)

KS F 2428-1990 Testing Method for Determination of Vibrating Factor by Consistency of Concrete
KS M 3004-2013 Testing method for flow properties of thermoplastics with a capillary rheometer
KS M 3004-2008 Testing method for flow properties of thermoplastics with a capillary rheometer
KS F 2393-2014 Standard test method for rheological properties of asphalt binder using dynamic shear rheometer
KS M ISO 11443:2007 Plastics－Determination of the fluidity of plastics using capillary and slit-die rheometers
KS M ISO 11443:2017 Plastics－Determination of the fluidity of plastics using capillary and slit-die rheometers
KS F 2410-1977 TESTING METHOD FOR FLOW OF CONCRETE BY THE flow board
KS M ISO 11443-2017 Plastics－Determination of the fluidity of plastics using capillary and slit-die rheometers
KS F 2337-2017 Testing method for marshall stability and flow of asphalt mixtures using marshall apparatus
KS M ISO 11443-2017(2022) Plastics－Determination of the fluidity of plastics using capillary and slit-die rheometers
KS F 2337-2017(2022) Testing method for marshall stability and flow of asphalt mixtures using marshall apparatus
KS M ISO 11443-2022 Plastics－Determination of the fluidity of plastics using capillary and slit-die rheometers
KS L 1626-2017 Testing method for flowability of fine ceramic powders
KS F 2393-2019 Standard test method for rheological properties of asphalt binder using dynamic shear rheometer
KS L 1626-2022 Testing method for flowability of fine ceramic powders
KS B ISO TR 3313:2014 Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments
KS B ISO TR 3313-2014(2024) Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments
KS B ISO TR 3313-2024 Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments
KS B ISO TR 3313-2019 Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments
KS B ISO TR 3313:2004 Measurement of fluid flow in closed conduits-Guidelines on the effects of flow pulsations on flow-measurement instruments

German Institute for Standardization

DIN 54811:1984-05 Testing of plastics; determining the fluidity of plastics melts by the capillary rheometer
DIN 51810-2:2017-04 Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system
DIN 51810-2 E:2016-09 Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system
DIN 51810-2 E:2016 Draft Document - Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system
DIN EN ISO 4534:2011-04 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test (ISO 4534:2010); German version EN ISO 4534:2010
DIN 51810-2:2011-04 Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system
DIN 53529-4:1991-04 Testing of rubber; curemetry; determination of vulcanization characteristics with the oscillating disc curemeter
DIN 54811:1984 Testing of plastics; determining the fluidity of plastics melts by the capillary rheometer
DIN EN 17408:2019-07 Draft Document - Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillation rheometry; German and English version prEN 17408:2019
DIN 51810-2 E:2010-03 Draft Document - Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system
DIN EN 14231:2003 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester; German version EN 14231:2003
DIN 55654:2015 Scratch test using a linear abrasion tester (crockmeter)
DIN ISO 4534:1985 Vitreous and porcelain enamels; determination of fluidity behaviour; fusion flow test
DIN 54458 E:2012 Draft Document - Structural adhesives - Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillation rheometry
DIN ISO 4534:1985-03 Vitreous and porcelain enamels; determination of fluidity behaviour; fusion flow test
DIN 55654 E:2015 Draft Document - Scratch test using a linear abrasion tester (crockmeter)
DIN 53019-4:2016 Rheometry - Measurement of rheological properties using rotational rheometers - Part 4: Oscillatory rheology
DIN 53019-4:2016-10 Rheometry - Measurement of rheological properties using rotational rheometers - Part 4: Oscillatory rheology
DIN 53019-4 E:2015-12 Rheometry - Measurement of rheological properties using rotational rheometers - Part 4: Oscillatory rheology

Japanese Industrial Standards Committee (JISC)

JIS Z 2502:2012 Metallic powders -- Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
JIS Z 2502:2000 Metallic powders -- Determination of flowability by means of a calibrated funnel (Hall flowmeter)
JIS K 7199:1991 Testing method for flow properties of thermoplastics with a capillary rheometer
JIS Z 2314:1991 Test methods for performance characteristics of eddy current testing instruments
JIS K 7199:1999 Plastics -- Determination of the fluidity of plastics using capillary and slit-die rheometers
JIS B 7535:1982 Flow type air gauges

American Society for Testing and Materials (ASTM)

ASTM RR-D20-1124 1985 D1238-Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM RR-D20-2005 2023 D1238-Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM RR-D20-2000 2020 D1238-Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D7175-05 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7175-07 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7175-05e1 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7175-08 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7175-15 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7175-23 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D3795-00a Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM D3795-20 Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM D5581-06 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)
ASTM D6204-05 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6204-04 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6204-99 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6204-01 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D3835-79(1983) Standard Test Method for Rheological Properties of Thermoplastics with a Capillary Rheometer
ASTM D5581-07A(2021)e1 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 in. Diameter Specimen)
ASTM D7605-11(2016) Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
ASTM D7605-11(2022) Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
ASTM E2510-20 Standard Test Method for Torque Calibration or Conformance of Rheometers
ASTM D8328-24 Standard Test Method for Dynamic Testing of Powders Using the Freeman Technology FT4 Powder Rheometer
ASTM D7681-11(2021) Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM D3795-00a(2006) Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM D6601-02 Standard Test Method for Rubber Properties-Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
ASTM C1874-19 Standard Test Method for Measuring the Rheological Properties of Cementitious Materials Using a Coaxial Rotational Rheometer
ASTM C1874-20 Standard Test Method for Measuring Rheological Properties of Cementitious Materials Using Coaxial Rotational Rheometer
ASTM D5099-93(2003) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
ASTM D569-90 Standard Test Method for Measuring the Flow Properties of Thermoplastic Molding Materials
ASTM D5099-93(1998) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
ASTM D2099-00 Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Maeser Water Penetration Tester
ASTM D2730-80 Test method for fluidity of high viscosity resin
ASTM D6601-19(2024) Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
ASTM D3835-96 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
ASTM RR-D01-1157 2011 D7681-Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM D2099-05(2010)e1 Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Maeser Water Penetration Tester
ASTM D7750-23 Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
ASTM D3795-00a(2012) Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM D2099-05 Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Maeser Water Penetration Tester
ASTM D5581-07a(2013) Standard test method for resistance of asphalt mixtures to plastic flow using a Marshall instrument (6-inch diameter specimen)

British Standards Institution (BSI)

BS 2782-7 METHOD 722B:1996 Methods of testing plastics. Rheological properties-Determination of the fluidity of plastics using capillary and slit-die rheometers
BS ISO 11443:2014 Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers
BS EN ISO 4534:2011 Vitreous and porcelain enamels. Determination of fluidity behaviour. Fusion flow test
BS EN ISO 4534:2010 Vitreous and porcelain enamels. Determination of fluidity behaviour. Fusion flow test
BS ISO 11443:2021 Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers
BS ISO 11443:2005 Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers
BS EN ISO 4534:2010(2014) Vitreous and porcelain enamels — Determination of fluidity behaviour — Fusion flow test
19/30387856 DC BS EN 17408. Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry
BS 7976-1:2002+A1:2013 Pendulum testers. Specification
BS 7976-1:2002 Pendulum testers - Specification
BS ISO TR 3313:1998 Measurement of fluid flow in closed conduits - Guidelines on the effects of flow pulsations on flow-measurement instruments
20/30406602 DC BS ISO 11443. Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers
BS PD 6467:1972 Arrangement of vibration tester
BS 1881-105:1984 Test methods for fluidity and uniformity of concrete
BS PD ISO/TR 3313:2018 Measurement of fluid flow in closed conduits. Guidelines on the effects of flow pulsations on flow-measurement instruments
BS ISO/TR 3313:1998 Measurement of fluid flow in closed conduits. Guidelines on the effects of flow pulsations on flow-measurement instruments
BS ISO/TR 3313:1998(1999) Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow - measurement instruments
BS 1344-18:1981 Methods of testing vitreous enamel finishes - Determination of fluidity behaviour: fusion flow test
PD ISO/TR 3313:2018 Measurement of fluid flow in closed conduits. Guidelines on the effects of flow pulsations on flow-measurement instruments
BS 7976-3:2002 Pendulum testers - Method of calibration

The American Road & Transportation Builders Association

AASHTO T 315-2020 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 315-2022 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 315-2012(2016) Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 315-2010 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 315-2019 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 315-2006 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 315-2009 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 245-1997(2008) Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
AASHTO T 245-2022 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO T 245-2015(2019) Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
AASHTO TP 79-2013 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
AASHTO T 378-2022 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
AASHTO TP 79-2015 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
AASHTO T 245-1997 Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
AASHTO T 245-2014 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO T 245-2013 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO T 245-2015 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO T 315-2008 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 378-2017 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
AASHTO T 378-2017(2021) Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
AASHTO TP 79-2015(2016) Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
AASHTO TP 79-2015(R2016) Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
AASHTO TP 79-2012 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT)
AASHTO T 418-2024 Standard Method of Test for Measuring Asphalt Binder Yield Energy and Elastic Recovery Using the Dynamic Shear Rheometer
AASHTO TP 123-2016(R2020) Standard Method of Test for Measuring Asphalt Binder Yield Energy and Elastic Recovery Using the Dynamic Shear Rheometer
AASHTO TP 70-2007 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 315-2002 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) HM-22; Part IIB; Formaly AASHTO TP 5

AASHTO - American Association of State Highway and Transportation Officials

T 315-2006 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2010 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2005 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2012 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2008 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2009 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2004 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP5-1997 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP5-1998 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP5-1993 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Edition 1B)
TP 79-2015 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
TP 79-2013 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
T 245-2013 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
T 245-2014 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
T 245-1997 Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
TP 79-2009 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT)
TP 79-2012 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT)
TP 79-2011 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt: (HMA) Using the Asphalt Mixture Performance Tester (AMPT)
TP 123-2016 Standard Method of Test for Measuring Asphalt Binder Yield Energy and Elastic Recovery Using the Dynamic Shear Rheometer
T 315-2002 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (HM-22; Part IIB; Formaly AASHTO TP 5)
TP 79-2010 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt: (HMA) Using the Asphalt Mixture Performance Tester (AMPT) (Revision 1)

International Organization for Standardization (ISO)

ISO 11443:2005 Plastics - Determination of the fluidity of plastics using capillary and slit-die rheometers
ISO 11443:2021 Plastics - Determination of the fluidity of plastics using capillary and slit-die rheometers
ISO 11443:1995 Plastics - Determination of the fluidity of plastics using capillary and slit-die rheometers
ISO 11443:2014 Plastics - Determination of the fluidity of plastics using capillary and slit-die rheometers
ISO 4534:2010 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test
ISO 4534:1980 Vitreous and porcelain enamels; Determination of fluidity behaviour; Fusion flow test
ISO/TR 3313:1998 Measurement of fluid flow in closed conduits - Guidelines on the effects of flow pulsations on flow-measurement instruments
ISO/TR 3313:2018 Measurement of fluid flow in closed conduits - Guidelines on the effects of flow pulsations on flow-measurement instruments

GCC Standardization Organization

GSO ISO 4534:2013 Vitreous and porcelain enamels -- Determination of fluidity behaviour -- Fusion flow test
GSO ISO/TR 3313:2021 Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments

Bureau of Indian Standards

IS 13360-4-5-2022 Plastics-Methods of Testing - Part 4 Rheological Properties - Section 5 Determination of the Fluidity of Plastics using Capillary and Slit-Die Rheometers
IS 13360-4-4-1999 Plastics - Methods of Testing - Part 4 : Rheological Properties - Section 4 : Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer

IT-UNI

UNI EN 17408-2021 Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry

Lithuanian Standards Office

LST EN 17408-2020 Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry
LST EN ISO 4534:2011 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test (ISO 4534:2010)

Ente Nazionale Italiano di Unificazione

UNI EN 17408:2021 Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry
UNI EN ISO 4534:2011 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test
UNI EN 14770:2006 Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR)

PL-PKN

PN-EN 17408-2021-02 E Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry
PN S95021-1991 Measuring instruments for motor vehicles. Tachometers. Requirements and tests
PN BN 7469-07-1966 Printing inks Methods of testing Determination of flow property

CH-SNV

SN EN 17408-2021 Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry

Gosstandart of Russia

GOST 31090.2-2002 Wheat flour. Physical characteristics of the test. Determination of rheological properties using an extensograph
GOST 20899-1998 Metallic powders. Determination of flowability by means of a calibrated funnel (Hall flowmeter)
GOST 20899-1975 Metal powders. Method of yield determination
GOST 31090.3-2002 Wheat flour. Physical characteristics of the test. Determination of water absorption and rheological properties using a valorigraph

Association Francaise de Normalisation

NF C42-502:1974 Measuring instrumetns. Current transformers. Characteristics.
NF A92-202*NF EN ISO 4534:2011 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test
NF ISO 6502-3:2023 Rubber - Measuring vulcanization characteristics using rheometers - Part 3: rotorless rheometer
NF ISO 6502-2:2018 Rubber - Measuring vulcanization characteristics using rheometers - Part 2: oscillating disk rheometer
NF EN ISO 4534:2011 Vitrified enamels - Determination of flow behavior - Flow test
NF P84-705:2019 Bentonite geosynthetics - Determination using the oedopermeameter of the swelling, flow and permeability characteristics of bentonitic geosynthetics (GSB) - Characterization tests and performance tests
NF B10-636*NF EN 14231:2003 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester.

Magyar Szabványügyi Testület

MSZ 3256/5-1981 Viscosity measuring instrument Canon. Fensko exchange current viscosity measuring instrument

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 4534:2016 Vitreous and porcelain enamels -- Determination of fluidity behaviour -- Fusion flow test
BH GSO ISO/TR 3313:2022 Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments

IN-BIS

IS 12554 Pt.1-1988 Specification for non-destructive coating thickness testing instruments Part 1 Eddy current instruments

YU-JUS

JUS H.P5.010-1991 Testing of pesticides.Dusts. Determination of flowability
JUS G.S2.512-1997 Flastics - Determination of rheologicaJ properties of thermoplastics with capillary rheometer

Danish Standards Foundation

DANSK DS/EN ISO 4534:2011 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test
DS/EN ISO 4534:2011 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test
DANSK DS/ISO 13227:2025 Petroleum products and lubricants – Rheological properties of lubricating greases – Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system

European Committee for Standardization (CEN)

EN ISO 4534:2010 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test (ISO 4534:2010)

Society of Automotive Engineers (SAE)

SAE ARP1254-2002 1990 Fluidics Test Methods and Instrumentation
SAE ARP1254-1972 FLUIDICS TEST METHODS AND INSTRUMENTATION

SE-SIS

SIS SS-ISO 4534:1984 Vitreous and porcelain enamels - Deter- mination of fluidity behaviour - Fusion f low test
SIS SS 13 75 30-1980 Concrete testing — Mortar for injection — Fluidity
SIS SS 13 75 30-1984 Concrete testing — Mortar for injection — Fluidity
SIS SS 13 71 23-1983 Concrete testing - Fresh concrete - Consistency - Flow table test

Spanish Association for Standardization (UNE)

AENOR UNE-EN ISO 4534:2011 Vitreous and porcelain enamels - Determination of fluidity behavior - Fusion flow test (ISO 4534:2010)
UNE-EN 1518:1999 NON-DESTRUCTIVE TESTING. LEAK TESTING. CHARACTERIZATION OF MASS SPECTROMETER LEAK DETECTORS.
UNE 115-422-1989 Earthquake tester. Instrument board
UNE-EN ISO 4534:2011 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test (ISO 4534:2010)

Standards Norway

NS-EN ISO 4534:2010 Vitreous and porcelain enamels — Determination of fluidity behaviour — Fusion flow test (ISO 4534:2010)

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 41.9-2000 Calorimeter Test Methods for Mass Flow Measurements of Volatile Refrigerants

American Water Works Association (AWWA)

AWWA WQTC71534 The Use of an In-Flow Imaging Flow Cytometer for Automated Detection and Monitoring of Cyanobacteria

AT-ON

ONORM S 7017-1985 Testing ofleather; determination of the behaviour against water under dynamic stress;permeometer Essai du cuir; determination du comportement a l'eau sous effort d'oscillation; permeometre

Indonesia Standards

SNI 15-3354-1994 Ceramic product flerible load test apparatus, Manual type

CZ-CSN

CSN 65 6336-1973 Testing of mechanical-dynamic properties of greases in Spengler-Apparatus
CSN 64 0214-1975 Flowability determination of ermosetting molding materials y means of cup-test

Standard Association of Australia （SAA）

SA TR ISO 3313:2023 Measurement of fluid flow in closed conduits - Guidelines on the effects of flow pulsations on flow-measurement instruments

JP-JEC

JEC 0221-2007 INSTRUMENTS USED FOR MEASUREMENTS IN IMPULSE VOLTAGE AND CURRENT TESTS Requirement for instruments