Liquidity tester

Liquidity tester, Total:243 items.

The international standard classification for "Liquidity tester" includes: Physicochemical methods of analysis , Enamels , food products in general , Non-destructive testing , Metrology and measurement in general , Exploratory and extraction equipment , Electricity. Magnetism. General aspects , Diagnostic, maintenance and test equipment , Measurement of electrical and magnetic quantities , Plastics in general , Raw materials , Road vehicle systems , Cement. Gypsum. Lime. Mortar , Power stations in general , Electricity. Magnetism. Electrical and magnetic measurements , Hydraulic construction .

The Chinese standard classification for "Liquidity tester" includes: Basic standards and general methods , Daily use enamel products , Grease and oil processing and products , X ray, magnetic powder, fluorescent light and other defectoscope , Industrial automation and control device in general , Petroleum drilling & production equipment and instrument , Electromagnetic Measurement , Instruments and test devices for vehicle , Electrical instrument and meter in general , Basic standards and general methods for synthetic resin and plastic , Building sanitary ceramics , Electrical parametric test and power supply unit , Cement , AC/DC electrical instrument recording instrument , Other electronic instrument and equipment .

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38092-2019 Vitreous and porcelain enamels—Determination of fluidity behaviour—Fusion flow test
GB/T 37511-2019 Inspection of grain and oils—Doughs rheological properties determination of wheat flour—Mixolab test
GB/T 14614-2019 Inspection of grain and oils—Doughs rheological properties determination of wheat flour—Farinograph test
GB/T 40244-2021 Chemicals - Liquid or solid identification - Fluidity test method

Professional Standard - Machinery

JB/T 11780-2014 Non-destructive Testing Instrument - Characterization and Verification of Array Eddy Current Testing Instrument
JB/T 5525-2011 Non-destructive testing instruments —characteristics measured method for one-channel eddy current testing instrument
JB/T 7480-1994 Current instrument test method
JB/T 7585-1994 D.C. Low Resistance Tester
JB/T 7585-2013 Tester for direct current low-resistence
JB/T 9233.14-1999 General methods of testing the performance of industrial process measurement and control instruments Start current
JB/T 7439.2-1994 Terminology relating to laboratory instruments - Dynamic test instrument

Professional Standard - Petroleum

SY/T 5429-2000 Small diameter flowrate and watercut logging tool
SY 6703-2007 General technical specifications for core fluidity test instruments
SY/T 6703-2007 General specifications for core flowing system

National Metrological Verification Regulations of the People's Republic of China

JJG(建材) 126-1999 Inspecting specification for apparatus of fluidity of cement mortar
JJG 843-2007 Verification Regulation of Leakage Current Tester
JJG(民航) 0092-2006 Verification Regulation of Eddy Current Conductivity Meter
JJG(交通) 096-2009 Flow Table for Determination Cement Mortar Fluidity
JJG 157-2020 Dynamic Shear Rheometer
JJG(民航) 029-1996 Verification Regulation of 4753880-503 Calibration Instrument for Fuel Flow System Line Checker
JJG 1120-2015 High Voltage Switch Operation Characteristic Testers
JJG(机械) 75-1992 Verification Regulations for Current Density Tester
JJG 843-2022 Leakage Current Tester
JJG(邮电) 043-1998 Phase Jitter Tester (PDH)
JJG(电子) 05002-1987 GY2610 Leakage Current Tester Trial Verification Regulations
JJG 1188-2022 Medical Leakage Current Testers
JJG(粤) 027-2014 Touch Current Testers

Professional Standard - Public Safety Standards

GA/T 485-2004 The protable braking performance tester for vehicles

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 43191-2023 On-site testing instruments of AC charging spot for electric vehicles
GB/T 23460.1-2009 Test methods of ceramic glazes—Part 1:Determination of fluidity behaviour—Fusion flow test
GB/T 28945-2012 Portable braking performance tester for vehicles
GB/T 32191-2015 Leakage current tester
GB/T 25278-2010 Plastics - Determination of the fluidity of plastics using capillary and slit-die rheometers

National Metrological Technical Specifications of the People's Republic of China

JJF(机械) 026-2008 Calibration specification for current density tester
JJF(机械)1017-2018 Calibration specification for motor vehicle comprehensive performance tester
JJF 1168-2007 Calibration Specification for Portable Braking Performance Tester for Motor Vehicle
JJF 1283-2011 Calibration Specification for Residual Current Operated Protective Device Operated Characteristic Tester
JJF 1168-2024 Calibration Specification for Portable Braking Performance Testers of Vehicles
JJF(机械) 1017-2018 Calibration specification for motor vehicle comprehensive performance tester
JJF 1584-2016 Calibration Specification for Current Transformer Volt--Ampere Characteristic Meters

Professional Standard - Traffic

JT/T 757-2009 Flow Table for Determine Cement Mortar Fluidity
JT/T 838-2012 Flow time tester for fine aggregate

Taiwan Provincial Standard of the People's Republic of China

CNS 12395-1988 Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
CNS 8516-1982 Method of Test for Flow Rates of Thermoplastics by Extrusion Plastometer

Group Standards of the People's Republic of China

T/CIMA 0004-2018 Testing equipment on-site for AC charging spot of electric vehicle
T/CSTM 00425-2023 Non-destructive testing— Steel products —Characterization and verification of automatic eddy current flaw detector
T/GDCKCJH 065-2022 Performance requirements and test methods for DC parameter testers of zinc oxide lightning arrester
T/CPQS E00063-2023 Performance requirements and test methods for household beauty care appliance Part 2: Micro current beauty care appliance
T/CIET 20-2023 DC motor air tightness automatic test equipment
T/QGCML 2362-2023 GIS and HGIS combined electrical and dynamic characteristics tester
T/CMA JD009-2020 Dynamic test items and methods for portable braking performance testers

Professional Standard - Building Materials

JC/T 958-2005 Flow table for determine mortar fluidity

Professional Standard - Electricity

DL/T 987-2005 General technical conditions of resistive current tester for zinc oxide surge arrester
DL/T 967-2005 Verification regulation of loop resistance tester and DC resistance high-speed tester
DL/T 826-2002 On-site testing equipment for alternating current electricity meters
DL/T 987-2017 General technical specifications of resistive current testers for zinc oxide surge arrester
DL/T 1694.5-2017 Calibration suecification for high voltage testing instruments. Part 5: Resistive current testers for zinc oxide surge arrester
DL/T 1694.3-2017 Calibration specification for high voltage testing instruments Part 3: High voltage switch operating characteristics tester

能源部

SY/T 5429-1991 Small diameter flow water content tester

工业和信息化部

HG/T 5893-2021 Automatic integrity test instrument for microfiltration membrane filters
JB/T 13939-2020 Nondestructive testing instruments - Eddy current thickness gauge

Professional Standard - Electron

SJ/T 11383-2008 General specification of leakage current tester
SJ/T 10439-1993 Test methods for bipolar transister DC parameter testers

Professional Standard - Water Conservancy

SL 123-1995 Method for calibration of cement mortar flow tester

Professional Standard - Aviation

HB 6136.13-1987 Flight Test Instrument (Static) Calibration Specification Flow

水利部

SL 123-2012 Calibration methods for fluidity tester of cement mortar

Professional Standard - Agriculture

LS/T 6150-2024 Grain and oil inspection - Rheological properties of wheat flour dough - Kneading instrument method

Korean Agency for Technology and Standards (KATS)

KS F 2428-1990 Testing Method for Determination of Vibrating Factor by Consistency of Concrete
KS M 3004-2013 Testing method for flow properties of thermoplastics with a capillary rheometer
KS M 3004-2008 Testing method for flow properties of thermoplastics with a capillary rheometer
KS F 2410-1977 TESTING METHOD FOR FLOW OF CONCRETE BY THE flow board
KS M ISO 11443:2017 Plastics－Determination of the fluidity of plastics using capillary and slit-die rheometers
KS M ISO 11443:2007 Plastics－Determination of the fluidity of plastics using capillary and slit-die rheometers
KS F 2393-2014 Standard test method for rheological properties of asphalt binder using dynamic shear rheometer
KS F 2337-2017 Testing method for marshall stability and flow of asphalt mixtures using marshall apparatus
KS M ISO 11443-2017(2022) Plastics－Determination of the fluidity of plastics using capillary and slit-die rheometers
KS F 2337-2017(2022) Testing method for marshall stability and flow of asphalt mixtures using marshall apparatus
KS M ISO 11443-2022 Plastics－Determination of the fluidity of plastics using capillary and slit-die rheometers
KS L 1626-2017 Testing method for flowability of fine ceramic powders
KS F 2393-2019 Standard test method for rheological properties of asphalt binder using dynamic shear rheometer
KS L 1626-2022 Testing method for flowability of fine ceramic powders
KS B ISO TR 3313:2014 Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments
KS B ISO TR 3313-2019 Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments

Japanese Industrial Standards Committee (JISC)

JIS Z 2502:2000 Metallic powders -- Determination of flowability by means of a calibrated funnel (Hall flowmeter)
JIS Z 2502:2012 Metallic powders -- Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
JIS K 7199:1991 Testing method for flow properties of thermoplastics with a capillary rheometer
JIS Z 2314:1991 Test methods for performance characteristics of eddy current testing instruments
JIS K 7199:1999 Plastics -- Determination of the fluidity of plastics using capillary and slit-die rheometers
JIS B 7535:1982 Flow type air gauges

American Society for Testing and Materials (ASTM)

ASTM RR-D20-2005 2023 D1238-Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM RR-D20-1124 1985 D1238-Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM RR-D20-2000 2020 D1238-Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D7175-05 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7175-07 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7175-05e1 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7175-08 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7175-23 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7175-15 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D3795-00a Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM D3795-20 Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM D5581-06 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)
ASTM D6204-05 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6204-04 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6204-99 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D6204-01 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D3835-79(1983) Standard Test Method for Rheological Properties of Thermoplastics with a Capillary Rheometer
ASTM D5581-07A(2021)e1 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 in. Diameter Specimen)
ASTM D7605-11(2022) Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
ASTM D7605-11(2016) Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
ASTM E2510-20 Standard Test Method for Torque Calibration or Conformance of Rheometers
ASTM D8328-24 Standard Test Method for Dynamic Testing of Powders Using the Freeman Technology FT4 Powder Rheometer
ASTM D7681-11(2021) Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM D3795-00a(2006) Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM D6601-02 Standard Test Method for Rubber Properties-Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
ASTM C1874-19 Standard Test Method for Measuring the Rheological Properties of Cementitious Materials Using a Coaxial Rotational Rheometer
ASTM D5099-93(2003) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
ASTM C1874-20 Standard Test Method for Measuring Rheological Properties of Cementitious Materials Using Coaxial Rotational Rheometer

SCC

BS 2782-7 METHOD 722B:1996 Methods of testing plastics. Rheological properties-Determination of the fluidity of plastics using capillary and slit-die rheometers
AASHTO T 315-2020 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 315-2012(2016) Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 315-2019 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 315-2006 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 315-2009 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 245-1997(2008) Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
AASHTO T 245-2022 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
DIN 51810-2 E:2016 Draft Document - Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system
AASHTO T 245-2015(2019) Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
AASHTO T 378-2022 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
DANSK DS/EN ISO 4534:2011 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test
NS-EN ISO 4534:2010 Vitreous and porcelain enamels — Determination of fluidity behaviour — Fusion flow test (ISO 4534:2010)
AENOR UNE-EN ISO 4534:2011 Vitreous and porcelain enamels - Determination of fluidity behavior - Fusion flow test (ISO 4534:2010)
BS ISO 11443:2005 Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers
AASHTO T 378-2017(2021) Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
AASHTO TP 79-2015(2016) Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
AASHTO TP 79-2012 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT)
AWWA WQTC71534 The Use of an In-Flow Imaging Flow Cytometer for Automated Detection and Monitoring of Cyanobacteria
BS PD 6467:1972 Arrangement of vibration tester
DIN 54458 E:2012 Draft Document - Structural adhesives - Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillation rheometry
DIN 55654:2015 Scratch test using a linear abrasion tester (crockmeter)
BS ISO/TR 3313:1998 Measurement of fluid flow in closed conduits. Guidelines on the effects of flow pulsations on flow-measurement instruments
SA TR ISO 3313:2023 Measurement of fluid flow in closed conduits - Guidelines on the effects of flow pulsations on flow-measurement instruments

AASHTO - American Association of State Highway and Transportation Officials

T 315-2006 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2010 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2008 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2009 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2005 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2012 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2004 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP5-1997 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP5-1998 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP5-1993 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Edition 1B)
TP 79-2015 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
TP 79-2013 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
T 245-2013 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
T 245-2014 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
T 245-1997 Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
TP 79-2012 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT)
TP 79-2009 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT)
TP 79-2011 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt: (HMA) Using the Asphalt Mixture Performance Tester (AMPT)
TP 123-2016 Standard Method of Test for Measuring Asphalt Binder Yield Energy and Elastic Recovery Using the Dynamic Shear Rheometer
T 315-2002 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (HM-22; Part IIB; Formaly AASHTO TP 5)

The American Road & Transportation Builders Association

AASHTO T 315-2022 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 315-2010 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO TP 79-2013 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
AASHTO TP 79-2015 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
AASHTO T 245-1997 Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
AASHTO T 245-2013 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO T 245-2014 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO T 245-2015 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO T 315-2008 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 378-2017 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
AASHTO TP 79-2015(R2016) Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
AASHTO TP 123-2016(R2020) Standard Method of Test for Measuring Asphalt Binder Yield Energy and Elastic Recovery Using the Dynamic Shear Rheometer
AASHTO TP 70-2007 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)

GSO

GSO ISO 4534:2013 Vitreous and porcelain enamels -- Determination of fluidity behaviour -- Fusion flow test
BH GSO ISO 4534:2016 Vitreous and porcelain enamels -- Determination of fluidity behaviour -- Fusion flow test
BH GSO ISO/TR 3313:2022 Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments
GSO ISO/TR 3313:2021 Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments

International Organization for Standardization (ISO)

ISO 11443:2021 Plastics - Determination of the fluidity of plastics using capillary and slit-die rheometers
ISO 11443:2005 Plastics - Determination of the fluidity of plastics using capillary and slit-die rheometers
ISO 11443:1995 Plastics - Determination of the fluidity of plastics using capillary and slit-die rheometers
ISO 11443:2014 Plastics - Determination of the fluidity of plastics using capillary and slit-die rheometers
ISO 4534:2010 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test
ISO 4534:1980 Vitreous and porcelain enamels; Determination of fluidity behaviour; Fusion flow test
ISO/TR 3313:1998 Measurement of fluid flow in closed conduits - Guidelines on the effects of flow pulsations on flow-measurement instruments

KR-KS

KS M ISO 11443-2017 Plastics－Determination of the fluidity of plastics using capillary and slit-die rheometers
KS B ISO TR 3313-2014(2024) Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments

German Institute for Standardization

DIN 51810-2:2017-04 Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system
DIN EN ISO 4534:2011-04 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test (ISO 4534:2010); German version EN ISO 4534:2010
DIN 51810-2 E:2016-09 Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system
DIN 54811:1984 Testing of plastics; determining the fluidity of plastics melts by the capillary rheometer
DIN ISO 4534:1985 Vitreous and porcelain enamels; determination of fluidity behaviour; fusion flow test
DIN EN 14231:2003 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester; German version EN 14231:2003

IT-UNI

UNI EN 17408-2021 Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry

Lithuanian Standards Office

LST EN 17408-2020 Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry
LST EN ISO 4534:2011 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test (ISO 4534:2010)

PL-PKN

PN-EN 17408-2021-02 E Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry
PN S95021-1991 Measuring instruments for motor vehicles. Tachometers. Requirements and tests
PN BN 7469-07-1966 Printing inks Methods of testing Determination of flow property

CH-SNV

SN EN 17408-2021 Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry

GOST

GOST 31090.2-2002 Wheat flour. Physical characteristics of the test. Determination of rheological properties using an extensograph
GOST 31090.3-2002 Wheat flour. Physical characteristics of the test. Determination of water absorption and rheological properties using a valorigraph

British Standards Institution (BSI)

BS EN ISO 4534:2010 Vitreous and porcelain enamels. Determination of fluidity behaviour. Fusion flow test
BS EN ISO 4534:2011 Vitreous and porcelain enamels. Determination of fluidity behaviour. Fusion flow test
BS ISO 11443:2014 Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers
BS EN ISO 4534:2010(2014) Vitreous and porcelain enamels — Determination of fluidity behaviour — Fusion flow test
BS ISO 11443:2021 Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers
19/30387856 DC BS EN 17408. Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry
BS 7976-1:2002+A1:2013 Pendulum testers. Specification
BS 7976-1:2002 Pendulum testers - Specification
BS ISO TR 3313:1998 Measurement of fluid flow in closed conduits - Guidelines on the effects of flow pulsations on flow-measurement instruments
20/30406602 DC BS ISO 11443. Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers
BS 1344-18:1981 Methods of testing vitreous enamel finishes - Determination of fluidity behaviour: fusion flow test
BS PD ISO/TR 3313:2018 Measurement of fluid flow in closed conduits. Guidelines on the effects of flow pulsations on flow-measurement instruments
BS ISO/TR 3313:1998(1999) Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow - measurement instruments

Association Francaise de Normalisation

NF C42-502:1974 Measuring instrumetns. Current transformers. Characteristics.
NF A92-202*NF EN ISO 4534:2011 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test
NF EN ISO 4534:2011 Vitrified enamels - Determination of flow behavior - Flow test
NF ISO 6502-3:2023 Rubber - Measuring vulcanization characteristics using rheometers - Part 3: rotorless rheometer
NF ISO 6502-2:2018 Rubber - Measuring vulcanization characteristics using rheometers - Part 2: oscillating disk rheometer
NF P84-705:2019 Bentonite geosynthetics - Determination using the oedopermeameter of the swelling, flow and permeability characteristics of bentonitic geosynthetics (GSB) - Characterization tests and performance tests
NF B10-636*NF EN 14231:2003 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester.

YU-JUS

JUS H.P5.010-1991 Testing of pesticides.Dusts. Determination of flowability

Danish Standards Foundation

DS/EN ISO 4534:2011 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test

HU-MSZT

MSZ 3256/5-1981 Viscosity measuring instrument Canon. Fensko exchange current viscosity measuring instrument

RU-GOST R

GOST 20899-1975 Metal powders. Method of yield determination
GOST 20899-1998 Metallic powders. Determination of flowability by means of a calibrated funnel (Hall flowmeter)

European Committee for Standardization (CEN)

EN ISO 4534:2010 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test (ISO 4534:2010)

SE-SIS

SIS SS-ISO 4534:1984 Vitreous and porcelain enamels - Deter- mination of fluidity behaviour - Fusion f low test
SIS SS 13 75 30-1980 Concrete testing — Mortar for injection — Fluidity
SIS SS 13 75 30-1984 Concrete testing — Mortar for injection — Fluidity
SIS SS 13 71 23-1983 Concrete testing - Fresh concrete - Consistency - Flow table test

IN-BIS

IS 12554 Pt.1-1988 Specification for non-destructive coating thickness testing instruments Part 1 Eddy current instruments

Society of Automotive Engineers (SAE)

SAE ARP1254-2002 1990 Fluidics Test Methods and Instrumentation

SAE - SAE International

SAE ARP1254-1972 FLUIDICS TEST METHODS AND INSTRUMENTATION

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 41.9-2000 Calorimeter Test Methods for Mass Flow Measurements of Volatile Refrigerants

Spanish Association for Standardization (UNE)

UNE-EN 1518:1999 NON-DESTRUCTIVE TESTING. LEAK TESTING. CHARACTERIZATION OF MASS SPECTROMETER LEAK DETECTORS.
UNE 115-422-1989 Earthquake tester. Instrument board
UNE-EN ISO 4534:2011 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test (ISO 4534:2010)

Indonesia Standards

SNI 15-3354-1994 Ceramic product flerible load test apparatus, Manual type

AT-ON

ONORM S 7017-1985 Testing ofleather; determination of the behaviour against water under dynamic stress;permeometer Essai du cuir; determination du comportement a l'eau sous effort d'oscillation; permeometre

CZ-CSN

CSN 64 0214-1975 Flowability determination of ermosetting molding materials y means of cup-test
CSN 65 6336-1973 Testing of mechanical-dynamic properties of greases in Spengler-Apparatus