Measuring range in method validation

Measuring range in method validation, Total:208 items.

The international standard classification for "Measuring range in method validation" includes: Protection against crime , Application of statistical methods , Solvents , Products of the chemical industry in general , Quality management and quality assurance , Cement. Gypsum. Lime. Mortar , Metrology and measurement in general , Noise emitted by machines and equipment .

The Chinese standard classification for "Measuring range in method validation" includes: Measurement in general , Guard and alarm system , Standardization and Quality Management , Basic standards and general methods for dye , Mathematics , Papermaking in general , Cement , Noise and vibration test methods .

National Metrological Technical Specifications of the People's Republic of China

JJF 1112-2003 Rules for Confirmation of Metrology Testing System

Shanxi Provincial Standard of the People's Republic of China

DB14/T 2797-2023 Specifications for confirmation of chemical analysis methods in testing laboratories

Group Standards of the People's Republic of China

T/HCAA 002-2021 Guidance for verification and validation of quantitative detection methods of pesticide residues in fruits and vegetables
T/SXCAA 006-2019 Measuring Equipment Verification/Calibration Result Confirmation Specification
T/CAQI 366-2024 Clinical testing quantitative project method confirmation
T/CECPA 003-2021 Validation Method for Reactor Nuclear Design Software

Professional Standard - Public Safety Standards

GA/T 1649-2019 Forensic sciences—Specifications for validation ofexamination methods for toxicants
GA/T 1179-2014 Technical requirements and test methods for voiceprint verification algorithm in security system
GA/T 1674-2019 Forensic science trace inspection morphological feature comparison method confirmation specification

国家认证认可监督管理委员会

RB/T 141-2018 Evaluation of measurement uncertainty in the chemical testing field—Applying quality control and method validation data

农业农村部

NY/T 2887-2016 Guidelines for Validation of Pesticide Product Quality Analysis Methods

Professional Standard - Commodity Inspection

SN/T 3223-2012 Protocol for validation of PCR for the diagnosis of animal infectious/contagious diseases
SN/T 224-2012 Specifications for confirmation of ELISA detection technology for animal infectious diseases
SN/T 3266-2012 Guideline for validation of food microbiological test methods
SN/T 3224-2012 Protocol for validation of ELISA for the diagnosis of animal infectious/contagious diseases

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 9661-1988 Measurement of aircraft noise around airport
GB/T 2384-1992 Dye intermediates general method for the determination of melting range
GB/T 32467-2015 Verification and validation of methods and internal quality contorl on chemical analysis — Terms and definitions
GB/T 2384-2007 Dyes intermediates—General method for the determination of melting range
GB/T 6379.5-2006 Accuracy(trueness and precision) of measurement methods and results -Part 5: Alternative methods for the determination of the precision of a standard measurement method
GB/T 44073-2024 Site validation method for microwave anechoic chamber
GB/T 32465-2015 Requirements for verification & validation of detection methods and internal quality control on chemical analysis
GB/T 22901-2008 Paper and board - Determination of air permeance(medium range) - General method
GB/T 6379.4-2006 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method
GB/T 2384-2015 Dyes intermediates―General method for the determination of melting range
GB/T 6379.3-2012 Accuracy(trueness and precision) of measurement methods and results - Part 3：Intermediate measures of the precision of a standard measurement method

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39698-2020 Confirmation methods for delivering common Portland cement
GB/T 2384-2021 Dyes intermediates—General method for the determination of melting range

国家市场监督管理总局

RB/T 033-2020 Guidance on verification and validation of microbiological testing methods
RB/T 032-2020 Guidance on verification and validation of gene amplification testing methods

国家质量监督检验检疫总局

SN/T 4561-2016 Guideline for validation of genetically-modified organism test methods

Guangxi Provincial Standard of the People's Republic of China

DB45/T 961-2014 Specifications for Confirmation of Energy Metering Work in Sugar Refining Enterprises

Henan Provincial Standard of the People's Republic of China

DB41/T 2454-2023 Technical Specifications for Validity Confirmation of Verification and Calibration Certificates for Measuring Instruments

Taiwan Provincial Standard of the People's Republic of China

CNS 12404-1988 Method of Qualification Test for Sphere Holder Welding Procedure
CNS 12950-1992 General Principles for The Verification of Dimensional Compliance Measurements in Building

未注明发布机构

CLSI M23S3-2023 Procedure for Confrming the Acceptability of Mueller-Hinton Agar Sources for Subsequent Use in CLSI and/or EUCAST Studies to Establish Disk Difusion Quality Control Ranges
ASTM RR-E08-1011 2016 E1921-Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
AS/NZS 4659.3:1999(R2002) Guide to Determining the Equivalence of Food Microbiology Test Methods Part 3: Confirmation Tests
ASTM RR-E08-1008 2012 E1921-Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range

Professional Standard - China Metal Association

CSM 01 01 01 06-2006 CSM 01 01 01 06-2006 Uncertainty assessment specification of measurement result of gas analysis method in iron，steel and alloy

Shaanxi Provincial Standard of the People's Republic of China

DB61/T 1327.16-2023 Qualification Certification of Inspection and Testing Institutions Part 16: Standard Method Verification and Non-standard Method Validation Requirements

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 2712-1996 Quality assurance requirements for measuring equipment Metrological confirmation system

中华人民共和国环境保护部

GB 9661-1988 Measurement of aircraft noise around airport

RU-GOST R

GOST R ISO 9169-2006 Air quality. Determination of performance characteristics of measurement methods
GOST 8.140-2009 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring heat conduction of solids in the range from 0.02 to 20 W/(m·K) at temperature from 90 to 1100 K
GOST 8.140-1982 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means measuring heat conductivity of solid bodies in the range of 0,1 to 5 W/(m鶮) at temperatures from 90 to 500 K and in the range
GOST R 8.643-2008 State system for ensuring the uniformity of measurements. Reflectometers for extreme ultraviolet in region 10 - 30 nm. Verification procedure
GOST R 8.644-2008 State system for ensuring the uniformity of measurements. Nanometer range relief measures with trapezoidal profile of elements. Methods for calibration
GOST IEC 61161-2014 State system for ensuring the traceability of measurements. Ultrasonic power in liquids. General requirements to measuring methods in the frequency range 0,5 to 25 MHz
GOST R ISO 5725-4-2002 Accuracy (trueness and precision) of measurement methods and results. Part 4. Basic methods for the determination of the trueness of a standard measurement method
GOST 8.650-2015 State system for ensuring the uniformity of measurements. State verification scheme for measuring and reproduction instruments of sound pressure in water within frequency range from 1·10 -3 to 1·10 6 Hz
GOST 8.357-1979 State system for ensuring the uniformity of measurements. Laser radiation measuring instruments. Energy, spectral and time renges
GOST R IEC 61391-2-2012 State system for ensuring the uniformity of measurements. Medical ultrasonic diagnostic equipment. General requirements to methods of measurement of maximum depth of penetration and local dynamic range
GOST R 8.997-2021 State system for ensuring the uniformity of measurements. Algorithms for evaluating metrological characteristics in certification of measurement procedures in the field of the use of atomic energy
GOST R ISO 5725-3-2002 Accuracy (trueness and precision) of measurement methods and results. Part 3. Intermediate measures of the precision of a standard measurement method
GOST 30114-1995 Paper and board. Determination of air permeance (medium range). General requirements for methods

European Telecommunications Standards Institute (ETSI)

ETSI ETR 304-1996 Methods for Testing and Specification (MTS); The Future in ETSI of Quality of Standards-Making, Validation and Testing
ETSI PRETS 300 414-1994 Methods for Testing and Specification (MTS); Use of SDL in European Telecommunication Standards Rules for Testability and Facilitating Validation
ETSI PRETS 300 414-1995 Methods for Testing and Specification (MTS); Use of SDL in European Telecommunication Standards Rules for Testability and Facilitating Validation
ETSI ETS 300 414-1995 (WITHDRAWN) Methods for Testing and Specification (MTS); Use of SDL in European Telecommunication Standards; Rules for Testability and Facilitating Validation Replaced by EG 201 383

SAE - SAE International

SAE J4000-2021 Identification and Measurement of Best Practice in Implementation of Lean Operation

Society of Automotive Engineers (SAE)

SAE J4000-1999 Identification and Measurement of Best Practice in Implementation of Lean Operation
SAE AS47641-1999 Validation Methods for MIL-STD-1760B Aircraft Station Interfaces

GSO

GSO IEC 61501:2014 Nuclear reactor instrumentation - Wide range neutron fluence rate meter - Mean square voltage method
OS GSO ISO 5725-3:2010 Accuracy (trueness and precision) of measurement methods and results -- Part 3: Intermediate measures of the precision of a standard measurement method
OS GSO ISO 5725-4:2010 Accuracy (trueness and precision) of measurement methods and results -- Part 4: Basic methods for the determination of the trueness of a standard measurement method
GSO ISO 5725-3:2010 Accuracy (trueness and precision) of measurement methods and results -- Part 3: Intermediate measures of the precision of a standard measurement method

International Electrotechnical Commission (IEC)

IEC TR 62935:2016 Measurement methods - High dynamic range video
IEC 61501:1998 Nuclear reactor instrumentation - Wide range neutron fluence rate meter - Mean square voltage method

British Standards Institution (BSI)

PD IEC/TR 62935:2016 Measurement methods. High dynamic range video
BS PD IEC/TR 62935:2016 Measurement methods. High dynamic range video
BS ISO 5725-3:1995 Accuracy (trueness and precision) of measurement methods and results. Intermediate measures of the precision of a standard measurement method
BS ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results - Basic methods for the determination of the trueness of a standard measurement method
BS ISO 5725-3:1994(2002) Accuracy (trueness and precision) of measurement methods and results — Part 3 : Intermediate measures of the precision of a standard measurement method
BS IEC 61501:1998 Nuclear reactor instrumentation. Wide range neutron fluence rate meter. Mean square voltage method
BS ISO 5725-4:1995 Accuracy (trueness and precision) of measurement methods and results - Basic methods for the determination of the trueness of a standard measurement method
BS IEC 61501:2001 Nuclear reactor instrumentation - Wide range neutron fluence rate meter - Mean square voltage method
BS 4311-1:2007 Gauge blocks manufactured to imperial specification – Part 1:Specification and validation
BS CISPR 16-4:2002 Specification for radio disturbance and immunity measuring apparatus and methods - Uncertainty in EMC measurements
BS ISO 5725-2:2019 Accuracy (trueness and precision) of measurement methods and results - Basic method for the determination of repeatability and reproducibility of a standard measurement method
BS EN 55022:2010 Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement
BS EN 55022:2011 Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement

CU-NC

NC 90-01-05-1987 Metrological Assurance. Sphere Indicator with 0,01 Division Value. Methods and Means of Verification
NC 90-01-43-1984 Metrological Assurance. "TESTER" Gages. Verffication Methods and Means
NC 90-01-09-1986 Metrological Assurance Pasameters, Verification Methods and Means
NC 90-01-13-1985 Metrological Assurance. Length Measures with Divisions. Verification Methods and Means
NC 90-01-50-1987 Metrological Assurance. Instrumentation Microscopes Methods and Means of Verification
NC 90-01-46-1987 Metrological Assurance. Verification and Layout Surfaces. Methods and Means of Verification
NC 90-01-52-1988 Vertical Longimeters. Methodsand Means of Verification
NC 90-01-45-1985 Metrological Assurance. Cogwheel's Normal Measuring Device. Verlfication Methods and Means
NC 90-01-39-1984 Metrological Assurance. Wires and Rollers for Measuring Threads. Verification Methods and Means

American Society for Testing and Materials (ASTM)

ASTM E2938-15 Standard Test Method for Evaluating the Relative-Range Measurement Performance of 3D Imaging Systems in the Medium Range
ASTM F1991-99 Standard Test Method for Performance of Chinese (Wok) Ranges
ASTM D1826-94(2003) Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
ASTM D1826-94(2017) Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
ASTM D1826-94(2010) Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter

AT-ON

ONORM S 5280-1-1998 Radon - Measuring methods and their r?nge of applications

SCC

DANSK DS/IEC TR 62935:2016 Measurement methods – High dynamic range video
VDI 2449 BLATT 3-2001 Test criteria for measurement procedures — General method for determining the uncertainty of calibrated measurement procedures
VDI 2449 BLATT 3-2001 Test criteria for measurement procedures — General method for determining the uncertainty of calibrated measurement procedures
BS ISO 5725-4:1994 Accuracy (trueness and precision) of measurement methods and results-Basic methods for the determination of the trueness of a standard measurement method
VDI/VDE/DGQ/DKD 2622 BLATT 2-2021 Calibrating measuring equipment for electrical quantities - methods for determining measurement uncertainty
DANSK DS/ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results – Part 4: Basic methods for the determination of the trueness of a standard measurement method
BS 3680-3C:1983 Measurement of liquid flow in open channels. Stream flow measurement-Methods for determination of the stage-discharge relation
BS EN 30012-1:1994 Quality assurance requirements for measuring equipment.-Metrological confirmation system for measuring equipment
VDI 4219-2009 Determination of the uncertainty of emission measurements using discontinuous measurement methods
VDI 4219-2009 Determination of the uncertainty of emission measurements using discontinuous measurement methods
CAN/CGSB 4.2 No.11.1-1994(R2013) Textile testing methods - Bursting resistance - Membrane burst meter test (Confirmed 2013)
CIE 198:2011 Determination of Measurement Uncertainties in Photometry
IEC TR 60034-4A:1972 Supplement A - Recommendations for rotating electrical machinery (excluding machines for traction vehicles) - Part 4: Methods for determining synchronous machine quantities from tests - Unconfirmed test methods for determining synchronous machine quant...
BS DD IEC/TS 60695-11-3:2004 Fire hazard testing-Test flames. 500 W flames. Apparatus and confirmational test methods

Acoustical Society of America (ASA)

ASA S1.40-2006 Specifications and Verification Procedures for Sound Calibrators

CZ-CSN

CSN ISO 10012-1:1993 Quality assurance requirements for measuring equipment. Part 1: Metrological confirmation system for measuring equipment
CSN 05 1021 Cast.8-1988 Welding.Analysis of aerosols generated in wel- ding. Determination of silicon con- tent
CSN 25 8159-1966 Thermometers for determination of flash point by Marcusson method
CSN 25 0003-1986 Initial verification of measuring instruments. General requirements
CSN 20 0300 Cast.13-1985 Measuiements of geometrical accuracyof machine toolsMethods of peripheral runout

SE-SIS

SIS SS-ISO 7077:1984 Measuring methods for building — General principles and procedures for the verification of dimensional compliance
SIS SS-ISO 10 012-1:1992 Quality assurance requirements for measuring equipment — Part 1: Metrological confirmation system for measuring equipment

American National Standards Institute （ANSI)

ANSI/ASTM F1991:2006 TEST METHOD FOR PERFORMANCE OF CHINESE WOK RANGES
ANSI/TIA-455-203-A-2009 Light Source Encircled Flux Measurement Method

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI)

ARI 575-1994 Method of Measuring Machinery Sound Within an Equipment Space

German Institute for Standardization

DIN 50472:1981-03 Testing of permanent magnets; determination of the magnetic flux values in the working range
DIN ISO 5725-3:2003-02 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method (ISO 5725-3:1994 including Technical Corrigendum 1:2001)
DIN ISO 5725-3:2003 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method (ISO 5725-3:1994 including Technical Corrigendum 1:2001)
DIN IEC 60510-1-3:1993 Methods of measurement for radio equipment used in satellite earth stations; measurement common to sub-systems and combinations of sub-systems; measurement in the i.f.range; identical with IEC 60510-1-3:1980 + A1:1991
DIN ISO 5725-5:2002 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method (ISO 5725-5:1998)
DIN ISO 5725-5:2002-11 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method (ISO 5725-5:1998)
DIN ISO 5725-4:2003 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method (ISO 5725-4:1994)

Danish Standards Foundation

DS/ISO 5725-3:1995 Accuracy (trueness and precision) of measurement methods and results- Part 3: Intermediate measures of the precision of a standard measurement method
DS/ISO 5725-3/Corr.1:2002 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method
DS/ISO 5725-6:1995 Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values
DS/ISO 5725-5:2000 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
DS/ISO 5725-5/Corr. 1:2005 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method

Japanese Industrial Standards Committee (JISC)

JIS D 1301:2001 Electric vehicle -- Measurement for driving range and energy consumption
JIS Z 8402-5:2002 Accuracy (trueness and precision) of measurement methods and results -- Part 5: Alternative methods for the determination of the precision of a standard measurement method
JIS Z 8402-3:1999 Accuracy (trueness and precision) of measurement methods and results -- Part 3: Intermediate measures of the precision of a standard measurement method
JIS Z 3198-1:2003 Test methods for lead-free solders -- Part 1: Methods for measuring of melting temperature ranges
JIS Z 3198-1:2014 Test methods for lead-free solders.Part 1: Methods for measuring of melting temperature ranges

Korean Agency for Technology and Standards (KATS)

KS A ISO 5725-3-2022 Accuracy(trueness and precision) of measurement methods and results－Part 3：lntermediate measures of the precision of a standard measurement method
KS A ISO 5725-4:2012 Accuracy(trueness and precision) of measurement methods and results-Part 4:Basic methods for the determination of the trueness of a standard measurement method
KS A ISO 5725-5-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 5：Alternative methods for the determination of the precision of a standard measurement method
KS A ISO 5725-4:2021 Accuracy(trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method
KS I ISO 13752:2014 Air quality — Assessment of uncertainty of a measurement method under field conditions using a second method as reference
KS A ISO 10980:2012 Validation of the strength of reference solutions used for measuring concentrations
KS I ISO 13752:2004 Air quality-Assessment of uncertainty of a measurementmethod under field conditions using a second method as reference
KS A ISO 5725-5-2022 Accuracy(trueness and precision) of measurement methods and results－Part 5：Alternative methods for the determination of the precision of a standard measurement method
KS A ISO 5725-4-2012(2017) Accuracy(trueness and precision) of measurement methods and results－Part 4：Basic methods for the determination of the trueness of a standard measurement method
KS C 0304-1-2020 Test method of magnetic shielding effectiveness in SLF range

National Association of Corrosion Engineers (NACE)

NACE SP0508-2010 Methods of Validating Equivalence to ISO 8502-9 on Measurement of the Levels of Soluble Salts (Item No. 21134)

Association Francaise de Normalisation

NF X65-040-1*NF ISO 12828-1:2012 Validation method for fire gas analysis - Part 1 : limits of detection and quantification
XP T90-500:2019 Water quality - Validation's method for confirmation and identification
NF C97-909:2008 Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz.
NF X06-041-4*NF ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results - Part 4 : basic methods for the determination of the trueness of a standard measurement method
NF ISO 5725-4:2020 Accuracy (trueness and precision) of measurement results and methods - Part 4: basic methods for determining the accuracy of a standardized measurement method
NF X06-041-5*NF ISO 5725-5:1998 Application statistics - Accuracy (trueness and precision) of measurement methods and results - Part 5 : alternative methods for the determination of the precision of a standard measurement methods.
FD X07-014:2006 Metrology - Optimisation of measuring equipment calibration frequencies (metrological confirmation)
NF X06-041-4:1994 Application of statistics. Accuracy (trueness and precision) of measurement methods and results. Part 4 : basic methods for the determination of the trueness of a standard measurement method.

VDI - Verein Deutscher Ingenieure

VDI 2449 Blatt 3-1999 Pruefkriterien von Messverfahren - Allgemeine Methode zur Ermittlung der Unsicherheit kalibrierfaehiger Messverfahren
VDI/VDE/DGQ/DKD 2622 BLATT 2-2013 Kalibrieren von Messmitteln fuer elektrische Groessen - Methoden zur Ermittlung der Messunsicherheit
VDI/VDE/DGQ/DKD 2622 Blatt 2.1-2010 Kalibrieren von Messmitteln fuer elektrische Groessen - Methoden zur Ermittlung der Messunsicherheit - Anmerkungen zu einer praxisgerechten Vorgehensweise
VDI 4219-2005 Ermittlung der Unsicherheit von Emissionsmessungen mit diskontinuierlichen Messverfahren

GOSTR

GOST 8.536-1985 State system for ensuring the uniformity of measurements. State verification schedule for means measuring of the coating thickness in the range of 1 to 20000 um
GOST 8.537-1985 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring of the surface coating density in the range of 0,001-1,000 kg/m2
GOST IEC 62127-1-2015 State system for ensuring the uniformity of measurements. Parameters of ultrasonic fields. General requirements to measuring methods and characterization of fields in the frequency range 0,5 to 40 MHz

Standard Association of Australia （SAA）

AS/NZS 1301.440:2016 Methods of test for pulp and paper, Method 440: Determination of air permeance (medium range) — Bendtsen method
AS 4659.3:2015 Guide to determining the equivalence of food microbiology test methods, Part 3: Confirmation tests
AS/NZS 1301.447:2016 Methods of test for pulp and paper, Method 447: Determination of air permeance (medium range) — Sheffield method

International Organization for Standardization (ISO)

ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method
ISO 12828-1:2011 Validation method for fire gas analysis - Part 1: Limits of detection and quantification
ISO 5751-3:1994 Motorcycle tyres and rims (metric series) - Part 3: Range of approved rim contours
ISO 10980:1995 Validation of the strength of reference solutions used for measuring concentrations
ISO/AWI 5725-5 Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
ISO/CD 5725-5:2023 Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
ISO 5725-3:1994 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method

YU-JUS

JUS N.N6.542-1989 Radiocomminications. Antermas. Hethods of measurement for antennas used in tbe mobile services. Test range
JUS N.N6.603-1980 Radiocommunications. Microwave radio-relay systems. Methods of measurement for equipment used in terrestrial radio-relay sistems. Measurements common to sub-systems and simulated radio-relay systems. Measurements in the intermediate frequency range

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

QUESTION 124/6-2006 Measurement methods for the verification and validation of digital television and sound broadcasting planning procedures

ES-AENOR

UNE 40-203-1972 Determination of acid content in wool
UNE 34-874-1985 cottage cheese. The content of citric acid is determined. Reference method

GOST

GOST R 8.763-2011 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of length in the range from 1·10-9 to 50 m and wavelength in the range from 0, 2 to 50 µm
GOST R IEC 62127-1-2009 State system for ensuring the uniformity of measurements. Parameters of ultrasonic fields. General requirements to measuring methods and characterization of fields in the frequency range 0,5 to 40 MHz

VN-TCVN

TCVN 6910-3-2001 Accuracy (Trueness and precision) of measurement methods and results.Part 3: Intermediate measures of the precision of a standard measurement method
TCVN 6910-4-2001 Accuracy (trueness and precision) of measurement methods and results.Part 4: Basic methods for the determination of the trueness of a standard measurement method
TCVN 6910-5-2002 Accuracy (trueness and precision) of measurement methods and results.Part 5: Alternative methods for the determination of the precision of a standard measurement method

International Telecommunication Union (ITU)

ITU-R QUESTION 124/6-2006 Measurement methods for the verification and validation of digital television and sound broadcasting planning procedures
ITU-R QUESTION 1246-2006 Measurement methods for the verification and validation of digital television and sound broadcasting planning procedures

Compressed Gas Association (U.S.)

CGA M-6-2007 GUIDELINE FOR ANALYTICAL METHOD VALIDATION FIRST EDITION

IT-UNI

UNI ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method

CENELEC - European Committee for Electrotechnical Standardization

EN 55024:1998 Information Technology Equipment - Immunity Characteristics - Limits and Methods of Measurement
EN 55022:2006 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement (Incorporates Amendment A1: 2007)
EN 55022:1988 Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment
EN 55022:1994 Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment (CISPR 22 : 1993)
EN 55022:1998 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement (Incorporates Amendments A1: 2000 and A2: 2003)

European Committee for Electrotechnical Standardization（CENELEC）

EN 55024:2010 Information technology equipment - Immunity characteristics - Limits and methods of measurement
EN 55022:2010 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement (Incorporating corrigendum October 2011)

BR-ABNT

ABNT EB-933-1979 Multiphase Watt Hour Meter. job confirmation

American Society of Mechanical Engineers (ASME)

ASME VVUQ 1-2022 Verification, Validation, and Uncertainty Quantification Terminology in Computational Modeling and Simulation

KR-KS

KS X ISO/IEC 10171-2003(2023) Information technology - information exchange between telecommunications and systems - standard data connection layer protocol list, standard XID type validator list, standard status setting information field type validator list, standard custom variable
KS A ISO 5725-4-2021 Accuracy(trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method
KS V 8890-2019(2024) Dynamic range measurement test procedure of frequency analysis system for ships

Association of German Mechanical Engineers

VDI/VDE/DGQ/DKD 2622 Blatt 2.1-2011 Calibration of measuring equipment for electrical quantities - Methods for the determination of measurement uncertainty - Notes to a practical approach

AENOR

UNE 82009-3:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 3: INTERMEDIATE MEASURES OF THE PRECISION OF A STANDARD MEASUREMENT METHOD.
UNE-ISO 5636-3:2015 Paper and board. Determination of air permeance (medium range). Part 3: Bendtsen method
UNE-ISO 5636-5:2015 Paper and board. Determination of air permeance (medium range). Part 5: Gurley method

ZA-SANS

SANS 100098-3:2009 Uncertainty of measurement Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)

Electronic Components, Assemblies and Materials Association

ECA SP 5114-2005 Electrical Relay Socket Specifications Proposed Reaffirmation for ANSI/EIA-540COOOO, 540CAOOOO, 540CAAA, and 540CAAB

Illuminating Engineering Society of North America

IESNA LM-58-2013 Approved Method for Spectroradiometric Measurement Methods for Light Sources

Others: Measuring range in method validation