Stress in polyethylene plastic

Stress in polyethylene plastic, Total:479 items.

The international standard classification for "Stress in polyethylene plastic" includes: Thermoplastic materials , Cellular materials , Doors and windows .

The Chinese standard classification for "Stress in polyethylene plastic" includes: Basic standards and general methods for synthetic resin and plastic , Synthetic resin and plastic , Plastic profile , Footgear , Labor safety technology in general , Packaging material and container , Daily use plastic products , Plastic components and accessorie .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 32682-2016 Plastics—Determination of environment stress cracking (ESC) of polyethylene一Full-notch creep test (FNCT)
GB/T 3807-1994 Polyvinyl chloride cellular plastic slippers
GB/T 1842-2008 Plastics - Test method for environmental stress-cracking of polyethylene
GB/T 30925-2014 Plastics―Ethylene-vinyl acetate copolymer(EVAC)thermoplastics―Determination of vinyl acetate content
GB/T 33319-2016 Plastics―Polyethylene compounds for breathable film
GB/T 10801.1-2002 polystyrene foam board for thermal insulation

Group Standards of the People's Republic of China

T/JTAIT 10-2021 Infrared spectroscopic method for rapid detection of polyethylene, polypropylene, polystyrene, polyvinyl chloride, ethylene-vinyl acetate copolymer and polyethylene terephthalate in plastic products
T/CSRA 21-2022 Determination of plastic composition—Qualitative method of PE,PP,PS,PVC,EVA,PET in plastics
T/SDAQI 083-2023 Polyethylene bags for food packaging
T/ZZB 1766-2020 Reacting caldron lined with fluoroplastics of Ethylene-Teflon Copolymer（ETFE）
T/HBFIA 0019-2021 polyethylene plastic container
T/SHPTA 060-2023 Polyethylene plastic culvert pipes

Taiwan Provincial Standard of the People's Republic of China

CNS 1440-1962 Pvc Sheet and Film, Soft
CNS 2456-1999 Polyethylene pipes for water works
CNS 2445-1990 Method of Test for Polyethylene Bottle
CNS 13496-2000 Unplasticized polyvinyl chloride pipes with polyethylene lining for water works
CNS 11710-1986 Rigid Polyvinyl Chloride Sheets and Films
CNS 1369-1987 Weather-proof P. E. Insulated Wires
CNS 2219-2005 Vinyl chloride and vinyl acetate co-polymer molding compounds
CNS 6599-1980 Vinyl Coated - Cloth Tube for Ventilation
CNS 6400-1988 P.V.C. Windows
CNS 14664-2002 Chlorinated poly (vinyl chloride) plastic pipe
CNS 10511-1983 Polytetrafluoroethylene Sheets
CNS 3216-1982 PVC Floor Sheets
CNS 12835-1991 Polyethylene Pipes for Natural Gas Supply
CNS 3143-1987 Method of Test for Polyvinyl Chloride Sheet
CNS 10516-1991 Polyvinyl Chloride Raincoats
CNS 10659-1983 Polyethylene Films for Agriculture
CNS 3142-1970 Pvc Board
CNS 10487-1988 Polyethylene Foam for Heat Insulating
CNS 3293-1992 Polyvinyl Chloride Tarpaulin
CNS 2444-1990 Polyethylene Bottle
CNS 9519-1982 Polyvinylchloride Coated Fabric
CNS 1298-2007 Unplasticized polyvinyl chloride pipes
CNS 6400-2006 P.V.C. windows
CNS 1298-1993 Unplasticized Polyvinyl Chloride Pipes
CNS 6632-1989 Household Polyvinyl Chloride Gloves
CNS 6729-1990 Polyethylene Films for Packaging
CNS 12093-1987 Method of Test for Polyvinyl Chloride Corrugated Sheet
CNS 3144-1987 Polyvinyl Chloride Corrugated Sheet
CNS 10510-1983 Polytetrafluoroethylene Tapes
CNS 6484-1981 Nonrigid PVC Handrail
CNS 9520-1982 Method of Test for Polyvinylchoride Coated Fabric

Professional Standard - Agriculture

ZB Y 28008-1989 Polyethylene Plastic Feces Bucket
NY/T 113-1989 Polyethylene plastic honey bucket

未注明发布机构

DIN EN ISO 24022-2 E:2019-04 Plastic polystyrene (draft)
JIS K 6745:2023 Plastics -- Unplasticized poly (vinyl chloride) sheets
DIN EN ISO 24023-1 E:2019-04 Plasticized polyvinyl chloride (draft)
DIN EN ISO 24023-2 E:2019-04 Plasticized polyvinyl chloride (draft)
ASTM RR-D20-1200 1998 D1693-Test Method for Environmental Stress-Cracking of Ethylene Plastics

Professional Standard - Light Industry

QB/T 1653-1992 PVC plastic sandals and slippers
QB/T 3807-1999 Cellular plastics. Polystyrene foam for thermal insulation
QB 1110-1991 Safety Procedure in Manufacturing Polyurethane, Polystyrene and Polyethylene Foam Plastic
QB/T 1124-1991 PVC plastic sole
QB/T 1651-1992 Polyethylene Plastic Hollow Board
QB/T 1649-1992 Polystyrene Foam Plastic Packaging Material
QB/T 3631-1999 Polyvinyl Chloride Plastic Corrugated Wiring Tube

轻工业部

QB 1124-1991 Polyvinyl Chloride Plastic Sole

未注明发布机构

DIN EN ISO 24022-2 E:2019-04 Plastic polystyrene (draft)
ASTM RR-D20-1200 1998 D1693-Test Method for Environmental Stress-Cracking of Ethylene Plastics
JIS K 6745:2023 Plastics -- Unplasticized poly (vinyl chloride) sheets
DIN EN ISO 24023-1 E:2019-04 Plasticized polyvinyl chloride (draft)
DIN EN ISO 24023-2 E:2019-04 Plasticized polyvinyl chloride (draft)

Hunan Provincial Standard of the People's Republic of China

DB43/T 551.2-2014 Recycling Specifications for Waste Plastics Part 2: Recycled Polyethylene Plastics and Recycled Polyethylene Plastics

Professional Standard - Construction Industry

JG/T 180-2005 Unplasticized polyvinyl chloride (PVC-U)doors
JG/T 256-2009 Unplasticized polyvinyl chloride plastic fence
JG/T 140-2005 Unplasticized polyvinyl chloride (PVC-U) windows

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40006.6-2021 Plastics—Recycled plastics—Part 6: Polystyrene（PS）and impact-resistant polystyrene(PS-I) materials
GB/T 40006.2-2021 Plastics—Recycled plastics—Part 2:Polyethylene(PE) materials

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34693-2017 Plastic-Chlorinated polyvinyl chloride) resins
GB/T 35504-2017 Plastic—Chlorinated poly(vinyl chloride)compounds

Professional Standard - Petrochemical Industry

SH/T 1770-2010 Plastics - Determination of water content for Polyethylene

Professional Standard - Nuclear Industry

EJ/T 1241.1-2015 Radiation crosslinked polyolefin foam Part 1: Polyethylene foam

Professional Standard - Commodity Inspection

SN 0625.2-1997 Inspection rules of imported plastic scrap as raw material. Polymer scrap of ethylene|| styrene|| vinyl chloride respective and others

工业和信息化部

JC/T 550-2019 Adhesives for polyvinyl chloride floor coverings

CZ-CSN

CSN 64 0766-1979 Plastics testing. Environmental stress cracking of polyethylene plastics
CSN 64 0321-1963 Testing of polystyrene hermoplastics
CSN 64 3041-1981 Plastics Polyethylen plastics pipes and fittings
CSN 64 3510 Z2-1996 plastic. brick expanded polystyrene
CSN 64 3200 Z2-1998 plastic. Basic regulations for polychloride

German Institute for Standardization

DIN CEN/TS 14541:2007 Plastics pipes and fittings for non-pressure applications - Utilisation of non-virgin PVC-U, PP and PE materials; German version CEN/TS 14541:2007
DIN EN ISO 14616:2004-10 Plastics - Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures - Determination of shrinkage stress and contraction stress (ISO 14616:1997); German version EN ISO 14616:2004
DIN EN ISO 14616:2004 Plastics - Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures - Determination of shrinkage stress and contraction stress (ISO 14616:1997); German version EN ISO 14616:2004
DIN CEN/TS 14541:2013 Plastics pipes and fittings - Characteristics for utilisation of non-virgin PVC-U, PP and PE materials; German version CEN/TS 14541:2013
DIN EN ISO 8985:2022-11 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:2022, Corrected version 2022-08); German version EN ISO 8985:2022
DIN EN ISO 8985:2020 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO/DIS 8985:2020); German and English version prEN ISO 8985:2020
DIN EN 1555-1:2021-12 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General; German version EN 1555-1:2021 / Note: Applies in conjunction with DIN EN 1555-2 (2021-12), DIN EN 1555-3 (2021-12), DIN EN 1555-4 (2021-12), DIN EN 1555-5 (2...
DIN EN 1555-4:2021-12 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves; German version EN 1555-4:2021 / Note: Applies in conjunction with DIN EN 1555-1 (2021-12), DIN EN 1555-2 (2021-12), DIN EN 1555-3 (2021-12), DIN EN 1555-5 (20...
DIN EN 1555-3:2021-12 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings; German version EN 1555-3:2021 / Note: Applies in conjunction with DIN EN 1555-1 (2021-12), DIN EN 1555-2 (2021-12), DIN EN 1555-4 (2021-12), DIN EN 1555-5 (...
DIN EN 1555-2:2021-12 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes; German version EN 1555-2:2021 / Note: Applies in conjunction with DIN EN 1555-1 (2021-12), DIN EN 1555-3 (2021-12), DIN EN 1555-4 (2021-12), DIN EN 1555-5 (202...
DIN EN 1555-5:2021-12 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system; German version EN 1555-5:2021 / Note: Applies in conjunction with DIN EN 1555-1 (2021-12), DIN EN 1555-2 (2021-12), DIN EN 1555-3 (...
DIN EN ISO 15494:2021-05 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and t...
DIN EN 15344:2024 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates; German and English version prEN 15344:2024
DIN EN ISO 8985:1998 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:1998); German version EN ISO 8985:1998
DIN EN 15344:2020 Plastics - Recycled plastics - Characterisation of Polyethylene (PE) recyclates; German and English version prEN 15344:2020
DIN EN 15342:2024 Plastics - Recycled plastics - Characterization of polystyrene (PS) recyclates; German and English version prEN 15342:2024
DIN EN 15344:2021-07 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates; German version EN 15344:2021
DIN EN 15344:2024-03 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates; German and English version prEN 15344:2024 / Note: Date of issue 2024-02-02*Intended as replacement for DIN EN 15344 (2021-07).
DIN EN 15344:2008 Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates; English version of DIN EN 15344:2008-02
DIN EN 15346:2015-01 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates; German version EN 15346:2014 / Note: To be replaced by DIN EN 15346 (2022-06).
DIN EN 15346:2022 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates; German and English version prEN 15346:2022
DIN EN 15342:2008 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates; English version of DIN EN 15342:2008-02
DIN EN 15342:2024-03 Plastics - Recycled plastics - Characterization of polystyrene (PS) recyclates; German and English version prEN 15342:2024 / Note: Date of issue 2024-02-02*Intended as replacement for DIN EN 15342 (2008-02).
DIN EN 15342:2008-02 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates; German version EN 15342:2007
DIN EN 15346:2022-06 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates; German and English version prEN 15346:2022 / Note: Date of issue 2022-05-13*Intended as replacement for DIN EN 15346 (2015-01).
DIN V 4279-7:1994 Internal pressure test of pressure pipelines for water - Pressure pipes of low-density polyethylene PE-LD, pressure pipes of high density polyethylene PE-HD (PE 80 and PE 100), pressure pipes of cross-linked polyethylene PE-X and pressure pipes of unplast
DIN EN 15346:2008 Plastics - Recycled Plastics - Characterisation of poly(vinyl chloride) (PVC) recyclates; English version of DIN EN 15346:2008-02
DIN EN ISO 7214:2012-07 Cellular plastics - Polyethylene - Methods of test (ISO 7214:2012); German version EN ISO 7214:2012

Korean Agency for Technology and Standards (KATS)

KS M ISO 14616-2002(2022) Plastics－Heatshrinkable film of polyethylene, ethylene copolymers and their mixtures－Determination of shrinkage stress and contraction stress
KS M ISO 14616-2002(2017) Plastics－Heatshrinkable film of polyethylene, ethylene copolymers and their mixtures－Determination of shrinkage stress and contraction stress
KS M ISO 14616-2022 Plastics－Heatshrinkable film of polyethylene, ethylene copolymers and their mixtures－Determination of shrinkage stress and contraction stress
KS M ISO 14616:2002 Plastics－Heatshrinkable film of polyethylene, ethylene copolymers and their mixtures－Determination of shrinkage stress and contraction stress
KS M 3353-1990(2001) POLYETHYLENE MOULDING MATERIALS
KS M 3353-1985 POLYETHYLENE MOULDING MATERIALS
KS M 3353-1990 POLYETHYLENE MOULDING MATERIALS
KS M 3401-2021 Unplasticized poly(vinyl chloride) (PVC-U) pipes for pressure applications
KS M 3404-2021 Unplasticized poly(vinyl chloride)(PVC-U) pipes for non-pressure applications
KS M 3402-2021 Unplasticized poly(vinyl chloride)(PVC-U) pipe fittings for pressure applications
KS M 3842-2010(2020) Plastics－Recycled moulding materials－Polyetylene(PE)
KS M 3844-2010(2020) Plastics－Recycled moulding materials－Polyvinyl chloride(PVC)
KS M 3410-2021 Unplasticized poly(vinyl chloride)(PVC-U) pipe fittings for nonpressure application
KS M 3862-2017 Polyethylene foam for thermal insulation
KS M 3514-1995 Polyethylene pipes for the supply of gaseous fuels
KS M ISO 1622-2:2008 Plastics－Polystyrene(PS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS I 3231-2016 Recycled plastics floorcovering — Polyvinylchloride
KS M 3842-2010 Plastics-Recycled moulding materials-Polyetylene(PE)
KS I 3231-2014 Recycled plastics floorcovering — Polyvinylchloride
KS M 3842-2020 Plastics－Recycled moulding materials－Polyetylene(PE)

Danish Standards Foundation

DS/EN ISO 14616:2004 Plastics - Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures - Determination of shrinkage stress and contraction stress
DS/EN ISO 8985:1998 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content
DS/EN 15344:2021 Plastics – Recycled plastics – Characterization of Polyethylene (PE) recyclates
DS/EN 15344:2008 Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates
DS/EN 15342:2008 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
DS/EN 15346:2008 Plastics - Recycled plastics - Characterisation of poly(vinyl chloride) (PVC) recyclates

SCC

DANSK DS/EN ISO 14616:2004 Plastics - Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures - Determination of shrinkage stress and contraction stress
UNE 53975:1996 PLASTICS. POLYETHYLENE (PE) CONTAINERS. ENVIRONMENTAL STRESS-CRACK RESISTANCE.
AS 1159:1979 Polyethylene (polythene) pipe for pressure applications
NS-EN ISO 14616:2004 Plastics — Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures — Determination of shrinkage stress and contraction stress (ISO 14616:1997)
AENOR UNE 53218:2016 Plastic materials. Determination of resistance to stress cracking in active environments of polyethylene plastic materials.
HOLDEN HN 1136-2001 Polyethylene Moulding Compounds
HOLDEN HN 1136-2012 Polyethylene Moulding Compound
MIL MIL-PRF-21922C-2015 Plastic Rods and Tubes, Polyethylene
HOLDEN HN 1459-2001 Polystyrene Moulding Compounds
AENOR UNE-EN ISO 15494:2016 Channeling systems in plastic materials for industrial applications. Polybutene (PB), polyethylene (PE), high temperature resistance polyethylene (PE-RT), cross-linked polyethylene (PE-X), polypropylene (PP). Metric series for...
DANSK DS/EN ISO 8985:1998 Plastics – Ethylene/vinyl acetate copolymer (EVAC) thermoplastics – Determination of vinyl acetate content
AS 1159:1973 Polyethylene (polythene) pipe for pressure applications (metric units)
DANSK DS/ISO 8985:2022 Plastics – Ethylene/vinyl acetate copolymer (EVAC) thermoplastics – Determination of vinyl acetate content
SAE AMSP21922-1999 Plastic Rods and Tubes, Polyethylene
UNE 53419:1989 PLASTICS. DETERMINATION OF THE JOINT RESISTANCE OF THE PLASTIFIED POLYVINYL CHLORIDE PLATES USED IN WATERPROOFING
NS-EN ISO 15494:2018 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and t...
DANSK DS/EN ISO 15494:2018 Plastics piping systems for industrial applications – Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) – Metric series for specifications for components and t...
NS-ISO 16770:2019 Plastics — Determination of environmental stress cracking (ESC) of polyethylene — Full-notch creep test (FNCT)
CSA B137.2-2023 Polyvinylchloride (PVC) injection- moulded gasketed fittings for pressure applications
UNE 53218:1974 PLASTICS. DETERMINATION OF THE RESISTANCE TO PLUGGING BY TENSIONS IN ACTIVE ENVIRONMENTS OF PLASTIC MATERIALS OF POLYETHYLENE
UNE 53218:2009 Plastics. Determination of the resistance to plugging by tensions in active environments of plastic materials of polyethylene.
AENOR UNE-EN ISO 15493/A1:2004 Channeling systems in plastic materials for industrial application. Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C). Specifications for components and for the...
AENOR UNE-EN ISO 15493:2004 Channeling systems in plastic materials for industrial application. Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C). Specifications for components and for the...
AS 1159:1988 Polyethylene pipes for pressure applications
AENOR UNE-EN ISO 8985:1998 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:1998)
NS-EN ISO 8985:1998 Plastics — Ethylene/vinyl acetate copolymer (EVAC) thermoplastics — Determination of vinyl acetate content (ISO 8985:1998)
BS EN ISO 3451-5:1997 Plastics. Determination of ash-Poly(vinyl chloride)
HOLDEN HN 2459-2005 MOULDING COMPOUNDS - ETHYLENE BASED COPOLYMER
NS-EN ISO 15494:2015 Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and t...
NS-EN 15344:2021 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates
BS EN ISO 15494:2015 Plastics piping systems for industrial applications. Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP). Metric series for specifications for components and the...
NS-EN 15344:2007 Plastics — Recycled Plastics — Characterisation of Polyethylene (PE) recyclates
DANSK DS/EN 15344:2021 Plastics – Recycled plastics – Characterization of Polyethylene (PE) recyclates
NS 3621:1986 Unplasticized polyvinyl chloride pressure pipes - (UPVC)
BS 1493:1967 Specification for polystyrene moulding materials
BS 1493:1958 Specification for polystyrene moulding materials
05/30097526 DC prEN 15344. Plastics. Recycled plastics. Characterisation of polyethylene (PE) recyclates
CAN/CSA-B137.9-M91-1991 Pressure pipes and fittings made of polyethylene-aluminum-polyethylene composite materials
AS 2070.1:1977 Plastics materials for food contact use - Polyethylene
BS 1493:1948 Specification for polystyrene moulding materials
AENOR UNE 53093:1970 Plastic materials. Specific viscosity of vinyl chloride polymers.
UNE-EN 15346:2008 Plastics - Recycled plastics - Characterisation of poly(vinyl chloride) (PVC) recyclates
NS-EN 15346:2007 Plastics — Recycled plastics — Characterisation of poly(vinyl chloride) (PVC) recyclates
DANSK DS/EN ISO 6259-2:2020 Thermoplastics pipes – Determination of tensile properties – Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chl...
DANSK DS/EN 15342:2007 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
NS-EN 15346:2014 Plastics — Recycled plastics — Characterization of poly(vinyl chloride) (PVC) recyclates
NS-EN 15342:2007 Plastics — Recycled Plastics — Characterization of polystyrene (PS) recyclates
DANSK DS/EN 15346:2007 Plastics - Recycled plastics - Characterisation of poly(vinyl chloride) (PVC) recyclates
NS-EN ISO 6259-2:2020 Thermoplastics pipes — Determination of tensile properties — Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chl...
BS PD CEN/TS 13598-3:2021 Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE)-Assessment of conformity
MIL MIL-P-44305-1988 PLASTIC FILM, FLEXIBLE, POLYAMIDE AND POLYETHYLENE
AS 2070.1:1980 Plastics materials for food contact use - Polyethylene
NS 2944:1979 Pressure pipes of unplasticized polyvinyl chloride (UPVC)
NS 2944:1972 Pressure pipes of unplasticized polyvinyl chloride (UPVC)
AS 2070.1:1992 Plastics materials for food contact use - Polyethylene
MIL MIL-P-21922B-1973 PLASTIC RODS AND TUBES, POLYETHYLENE (SUPERSEDING MIL-P-21922A)
MIL MIL-P-40619B-1991 PLASTIC MATERIAL, CELLULAR, POLYSTYRENE (FOR BUOYANCY APPLICATIONS) (SUPERSEDING MIL-P-40619A) (NO S/S DOCUMENT)
AS/NZS 4130:1997 Polyethylene (PE) pipes for pressure applications
AS/NZS 4130:2001 Polyethylene (PE) pipes for pressure applications
NS-EN ISO 8985:2022 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:2022, Corrected version 2022-08)
AS K119:1969 Polyethylene (polythene) pipe for cold water supply
BS EN ISO 7214:2002 Cellular plastics. Polyethylene. Methods of test

GSO

GSO ISO 14616:2015 Plastics -- Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures -- Determination of shrinkage stress and contraction stress
BH GSO ISO 14616:2016 Plastics -- Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures -- Determination of shrinkage stress and contraction stress
GSO ASTM F639:2021 Standard Specification for Polyethylene Plastics for Medical Applications
GSO ISO 16770:2013 Plastics - Determination of environmental stress cracking (ESC) of polyethylene - Full-notch creep test (FNCT)
BH GSO ISO 16770:2016 Plastics - Determination of environmental stress cracking (ESC) of polyethylene - Full-notch creep test (FNCT)
BH GSO ASTM D3261:2013 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
OS GSO ASTM D3261:2012 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
GSO ISO 6401:2013 Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method
BH GSO EN 15342:2023 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
BH GSO EN 15346:2023 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
GSO EN 15342:2023 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
GSO EN 15346:2023 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
GSO ISO 7214:2015 Cellular plastics -- Polyethylene -- Methods of test

British Standards Institution (BSI)

BS ISO 14616:1997 Plastics - Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures - Determination of the shrinkage stress and contraction stress
BS EN ISO 14616:2004 Plastics. Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures. Determination of the shrinkage stress and contraction stress
BS EN ISO 14616:1997 Plastics - Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures - Determination of the shrinkage stress and contraction stress
BS DD CEN/TS 14541:2007 Plastics pipes and fittings for non-pressure applications. Utilisation of non-virgin PVC-U, PP and PE materials
BS ISO 16770:2004 Plastics - Determination of environmental stress cracking (ESC) of polyethylene - Full-notch creep test (FNCT)
BS EN ISO 8985:2022 Plastics. Ethylene/vinyl acetate copolymer (EVAC) thermoplastics. Determination of vinyl acetate content
BS ISO 16770:2019 Plastics. Determination of environmental stress cracking (ESC) of polyethylene. Full-notch creep test (FNCT)
BS EN ISO 8985:1998 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content
BS ISO 4437-2:2014 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Pipes
BS EN 60811-406:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Resistance to stress cracking of polyethylene and polypropylene compounds
20/30409956 DC BS EN ISO 8985. Plastics. Ethylene/vinyl acetate copolymer (EVAC) thermoplastics. Determination of vinyl acetate content
ASTM D3261-24 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
BS EN 1555-3:2010 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Fittings
BS EN 15344:2021 Plastics. Recycled plastics. Characterization of Polyethylene (PE) recyclates
BS ISO 4437-4:2015 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Valves
BS ISO 4437-3:2024 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) - Fittings
BS EN 1555-1:2010 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). General
BS ISO 4437-1:2024 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) - General
BS ISO 4437-2:2024 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) - Pipes
BS EN 1555-1:2021 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) - General
BS EN 17508:2021 Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors. Terminology of PVC based materials
BS EN 1555-2:2004 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Pipes
BS ISO 4437-3:2014 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Fittings
BS EN ISO 3451-5:2002 Plastics - Determination of ash - Poly(vinyl chloride)
BS EN ISO 14663-2:2006 Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN 1555-4:2021 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) - Valves
BS ISO 4437-4:2022 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Valves
BS EN 1555-1:2004 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - General
BS EN 1555-4:2004 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Valves
BS EN 1555-3:2021 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Fittings
BS EN 1555-2:2021 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Pipes
BS EN 1555-3:2010+A1:2012 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Fittings
BS EN 1555-2:2010 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Pipes
BS EN 1555-3:2004 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Fittings
PD CEN/TS 13598-3:2021 Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Assessment of conformity
BS ISO 24047:2021 Plastics. Polyethylene (PE) and polypropylene (PP) thermoplastics. Determination of metal content by ICP-OES
BS EN ISO 6259-2:2020 Thermoplastics pipes. Determination of tensile properties - Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl…
BS EN ISO 7214:2012 Cellular plastics. Polyethylene. Methods of test
21/30440313 DC BS EN ISO 15493 AMD11. Plastics piping systems for industrial applications. Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C). Specifications for components and the…
BS EN 12201-5:2003 Plastic piping systems for water supply - Polyethylene (PE) - Fitness for purpose of the system
BS EN ISO 7214:2007 Cellular plastics - Polyethylene - Methods of test

AENOR

UNE 53975:2007 Plastics. Polyethylene (PE) containers. Environmental stress-crack resistance.
UNE-EN ISO 14616:2005 Plastics - Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures - Determination of shrinkage stress and contraction stress (ISO 14616:1997)
UNE-EN ISO 8985:1998 PLASTICS. ETHYLENE/VINYL ACETATE COPOLYMER (EVAC) THERMOPLASTICS. DETERMINATION OF VINYL ACETATE CONTENT. (ISO 8985:1998).
UNE-EN 15344:2008 Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates
UNE-EN 15342:2008 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
UNE-EN 15346:2015 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates

International Organization for Standardization (ISO)

ISO 14616:1997 Plastics - Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures - Determination of shrinkage stress and contraction stress
ISO 8985:1998 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content
ISO 8985:2022 Plastics — Ethylene/vinyl acetate copolymer (EVAC) thermoplastics — Determination of vinyl acetate content
ISO 1872-1:1986 Plastics; Polyethylene (PE) and ethylene copolymer thermoplastics; Part 1 : Designation
ISO 16770:2004 Plastics - Determination of environmental stress cracking (ESC) of polyethylene - Full-notch creep test (FNCT)
ISO 9393-2:1997 Thermoplastics valves - Pressure test methods and requirements - Part 2: Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves
ISO 8985:1989 Plastics; ethylene/vinyl acetate copolymer (E/VAC) thermoplastics; determination of vinyl acetate content
ISO 1159:1978 Plastics; Vinyl chloride-vinyl acetate copolymers; Determination of vinyl acetate
ISO 1622:1975 Plastics — Polystyrene moulding and extrusion materials — Designation
ISO 1872-2:1989 Plastics; polyethylene (PE) and ethylene copolymer thermoplastics; part 2: preparation of test specimens and determination of properties
ISO 2897:1976 Plastics — Designation of impact-resistant polystyrenes
ISO 4613-1:1985 Plastics — Ethylene/vinyl acetate copolymer thermoplastics (E/VAC) — Part 1: Designation
ISO 1872:1972 Polyethylene thermoplastic materials — Designation
ISO 24047:2021 Plastics - Polyethylene (PE) and polypropylene (PP) thermoplastics - Determination of metal content by ICP-OES
ISO 9393-2:1997/Cor 1:1997 Thermoplastics valves - Pressure test methods and requirements - Part 2: Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves; Technical Corrigendum 1
ISO 7214:2007 Cellular plastics - Polyethylene - Methods of test
ISO 7214:1998 Cellular plastics - Polyethylene - Methods of test
ISO 7214:1985 Cellular plastics; Polyethylene; Methods of test

Association Francaise de Normalisation

NF T54-125*NF EN ISO 14616:2004 Plastics - Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures - Determination of shrinkage stress and contraction stress.
NF EN ISO 14616:2004 Plastics - Heat-shrinkable films made of polyethylene, ethylene copolymers and their mixtures - Determination of shrinkage and contraction stresses
NF T51-820*NF EN ISO 8985:2022 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content
NF T50-006:1990 PLASTICS. POLYETHYLENE (PE) AND ETHYLENE COPOLYMER THERMOPLASTICS. PART 1 : DESIGNATION.
NF T54-125:1993 Plastics. Heatshrinkable films in polyethylene, ethylen copolymers and their mixtures. Determination of the shrinking and contraction stresses. Test method.
NF T51-820:1998 Plastics. Ethylene/vinyl acetate copolymer (EVAC) thermoplastics. Determination of vinyl acetate content.
NF EN ISO 8985:2022 Plastics - Thermoplastic ethylene/vinyl acetate copolymers (EVAC) - Determination of vinyl acetate
NF T54-078:1992 Plastics. Polyethylene (pe) for plastics piping systems. Determination of the limiting stress intensity factor. Test method.
NF EN 17670-2:2023 Plastic piping systems for the pressureless underground conveyance of surface water - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for hydrants. .
NF EN ISO 19065-1:2015 Plastiques - Matériaux plastique acrylonitrile-styrène-acrylate (ASA), plastique acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et plastique acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 1 : s...
NF T50-004:1988 PLASTICS. ETHYLENE/VINYL ACETATE COPOLYMER THERMOPLASTICS (E/VAC). PART 1 : DESIGNATION.
NF T51-027:1965 Plastics. Determination of vinyl in vinyl chloride acetate copolymers.
NF T54-029:1981 Plastiques - Raccords moulés en polychlorure de vinyle non plastifié - Série pression - Spécifications
NF EN 15344:2021 Plastics - Recycled plastics - Characterization of polyethylene (PE) recyclates
NF T51-105:1971 Plastics. Cold bend temperature of flexible polyvinyl chloride compound.
NF EN 15346:2014 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
NF T50-803:2008 Plastics - Recycled plastics - Characterisation of Polyethylene (PE) recyclates.
NF T50-803*NF EN 15344:2021 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates
NF T50-801*NF EN 15342:2008 Plastics - Recycled plastics - Characterization of polystyrene (PS) recyclates
NF EN 15342:2008 Plastics - Recycled plastics - Characterization of polystyrene (PS) recyclates
NF T50-805*NF EN 15346:2014 Plastics - Recycled plastics - Characterisation of poly(vinyl chloride) (PVC) recyclates
NF T50-805:2008 Plastics - Recycled plastics - Charaterisation of poly(vinyl chloride)(PVC)recyclates.
NF T51-142:1992 Plastics. Polyethylene and polyethylene copolymere compounds. Evaluation of the degree of dispersion of carbon black. Test method.
NF T54-090:1976 Plastics. Unplasticized and chlorinated PVC pipes. Colour of pipes and fittings.
NF EN ISO 7214:2012 Plastiques alvéolaires - Polyéthylène - Méthodes d'essai

Lithuanian Standards Office

LST EN ISO 14616:2005 Plastics - Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures - Determination of shrinkage stress and contraction stress (ISO 14616:1997)
LST EN ISO 8985:2001 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:1998)
LST EN 15344-2021 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates
LST EN 15344-2008 Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates
LST EN 15346-2008 Plastics - Recycled plastics - Characterisation of poly(vinyl chloride) (PVC) recyclates
LST EN 15342-2008 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
LST EN ISO 6259-2:2020 Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chlori

European Committee for Standardization (CEN)

EN ISO 8985:2022 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:2022, Corrected version 2022-08)
EN ISO 14616:2004 Plastics - Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures - Determination of shrinkage stress and contraction stress (ISO 14616:1997)
EN ISO 8985:1998 Plastics - Ethylene/Vinyl Acetate Copolymer (EVAC) Thermoplastics - Determination of Vinyl Acetate Content ISO 8985:1998
FprEN ISO 8985:2021 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO/FDIS 8985:2021)
EN 1555-1:2010 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
EN 1555-1:2021 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
EN 15344:2021 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates
EN 15344:2007 Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates
prEN 15342 rev Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates

RU-GOST R

GOST 13518-1968 Plastics. Method for determination of environmental stress-cracking resistance of polyethylene
GOST R ISO 1159-1993 Plastics. Vinylchloride-vinylacetate copolymers. Determination of vinylacetate
GOST 25737-1991 Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of residual vinyl chloride monomer. Gasochromatographic method
GOST 17617-1972 Polyvinylchloride plastic bands. Specifications
GOST 18404.3-1973 PE insulated PVC sheathed control cables. Specifications
GOST 9639-1971 Sheets from unplasticized polyvinylchloride (sheet vinyplast). Specifications
GOST R 51613-2000 Pressure pipes made of unplasticized polyvinylchloride. Specifications
GOST R 53652.2-2009 Thermoplastics pipes. Method for determination of tensile properties. Part 2. Pipes made of unplasticized poly(vinil chloride), chlorinated poly(vinil chloride) and high impact poly(vinil chloride)

SE-SIS

SIS SMS 2014-1967 Plastic pipes. lJressure and waste wate.r pipes of high density polyethylene
SIS SMS 1775-1967 Plastic pipes. Pressure pipes of low density polyethylene
SIS SS 3362-1990 Plastics pipes — Pressure pipes of PE for cold water pipelines
SIS SMS 1878-1967 Plastic pipes. Pressure pipes of low density polyethylene. Testing
SIS SS-ISO 1159:1987 Plastics - Vinyl chloride-vinyl acetate copolymers - Determination of vinyl acetate
SIS SMS 2015-1967 Plastic pipes. Pressure and waste water pipes of hi.gh density polyethylene. Testing
SIS 16 63 30-1971 Rigid polyvinylchloride compounds. General information

ES-UNE

UNE 53218:2023 Plastics. Determination of the resistance to cracking by tensions in active environments of plastic materials of polyethylene and polypropylene.
UNE-EN ISO 8985:2022 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:2022, Corrected version 2022-08)
UNE 53975:2023 Plastics. Polyethylene (PE), Polypropylene (PP) and Poly(ethylene terephthalate) (PET) containers. Environmental stress-crack resistance in active environment.
UNE-EN 15344:2022 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates

GM North America

GM GMP.PE.060-1992 Polyethylene - High Density, Stress Crack Resistant, Blow Molding
GM GM6064M-1986 Polyethylene Plastic Molding Compounds Replaced by GM7001M
GM GM6054M-1986 Polyethylene Plastics Replaced by GM7000M
GM GM6065M-1986 Polystyrene Plastic Molding Compounds Replaced by GM7001M
GM GMP.PE.014-2001 Polyethylene - High Density, Stress Crack Resistant, Injection Molding Grade (Revision A)
GM GM6055M-1986 Polystyrene Plastics Replaced by GM7000M

Society of Automotive Engineers (SAE)

SAE AMS3659C-1993 Polytetrafluoroethylene Extrusions, Premium Strength, Sintered and Stress-Relieved
SAE AMS-P-21922-1999 Plastic Rods and Tubes, Polyethylene
SAE AMS3532B-1993 ETHYLENE TETRAFLUOROETHYLENE (ETFE) MOLDED SHEET Stress-Relieved
SAE AMS3532C-1993 Ethylene Tetrafluoroethylene (Etfe) Molded Sheet, Stress-Relieved
SAE AMS3630C-1961 PLASTIC EXTRUSIONS, FLEXIBLE Polyvinyl Chloride
SAE AMS3630D-1991 PLASTIC EXTRUSIONS, FLEXIBLE Polyvinyl Chloride
SAE AMS3630B-1955 PLASTIC EXTRUSIONS, FLEXIBLE Polyvinyl Chloride

Defense Logistics Agency

DLA L-P-535 E NOTICE 4-2012 PLASTIC SHEET (SHEETING): PLASTIC STRIP: POLY(VINYL CHLORIDE) AND POLY(VINYL CHLORIDE-VINYL ACETATE), RIGID
DLA L-P-535 E NOTICE 3-1999 PLASTIC SHEET (SHEETING): PLASTIC STRIP: POLY(VINYL CHLORIDE) AND POLY(VINYL CHLORIDE-VINYL ACETATE), RIGID
DLA L-P-535 E VALID NOTICE 2-1991 PLASTIC SHEET (SHEETING): PLASTIC STRIP: POLY(VINYL CHLORIDE) AND POLY(VINYL CHLORIDE-VINYL ACETATE), RIGID
DLA L-P-535 E-1979 PLASTIC SHEET (SHEETING): PLASTIC STRIP: POLY(VINYL CHLORIDE) AND POLY(VINYL CHLORIDE-VINYL ACETATE), RIGID

Japanese Industrial Standards Committee (JISC)

JIS K 7192:1999 Plastics -- Ethylene/vinyl acetate copolymer (EVAC) thermoplastics -- Determination of vinyl acetate content
JIS K 6870:1995 Polystyrene moulding materials
JIS K 7372:2000 Plastics -- Vinyl chloride-vinyl acetate copolymers -- Determination of vinyl acetate
JIS K 6745:2015 Plastics -- Unplasticized poly (vinyl chloride) sheets
JIS K 6745:2008 Plastics -- Unplasticized poly (vinyl chloride) sheets
JIS K 6774:2022 Polyethylene pipes for the supply of gaseous fuels

American National Standards Institute （ANSI)

ANSI/ASTM D5203:1998 Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer HDPE Sources (08.03)
ANSI/ASTM D2737a:2012 Specification for Polyethylene (PE) Plastic Tubing
ANSI/ASTM D3291:1997 Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics under Compression (08.03)
ANSI/ASTM D2609:2002 Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
ANSI/ASTM D1785:2012 Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
ANSI/ASTM D2737:2021 Standard Specification for Polyethylene (PE) Plastic Tubing

GM Holden Ltd

HOLDEN HN 1300-1976 Expanded Polyethylene Ethylene Vinyl Acetate Foam
HOLDEN HN 2198-2000 Foam - Polystyrene - PPO

US-FCR

FCR FED PS31-70-1971 POLYSTYRENE PLASTIC SHEET

RO-ASRO

STAS E 12378-1985 Plasties POL YSTIRENE Coding
STAS 10045-1989 PLASTICS Styrefte determination ol polystyrene
STAS 9685-1974 PLASTIGS Determination of vinyl acetalc content in vinyl chloride - vinyl acetate copolymers
STAS R 9454-1973 Plastics PLASTIFIED POLYVINYL CHLORIDE GRAINS Classification
STAS 7461-1984 Cellular plastics CELL.ULAMR POL YSTYRENE
STAS 7532-1983 Plastic packages POLYETHYLENE BAGS FOR CHEMICAL FERTILIZERS
STAS 6096-1973 PLASTICS Determination of melt flow index of poly- ethylene and polyethylene compounds

YU-JUS

JUS G.C1.290-1990 Plastics. Polyethylene(PE) and ethylene copolymer thermoplastics. Classification, designation and determination of properties
JUS G.S3.507-1987 Plastics. Pipes and fittings from polyethylene typ 1, polyethylene tip 3, polypropylene and unplasticized polyvinyl chloride. Chemical resistence with respect to fluids
JUS G.C6.601-1985 Plastics. Polyethylene pipes. Dimensions and tolerances

Indonesia Standards

SNI 7808-2012 Bijih plastik polietilena
SNI 19-4377-1996 Polyethylene plastic for packaging
SNI 12-7074-2005 PVC plastics sandals
SNI 06-6312-2000 High density polyethylene plastic bags
SNI 06-1013-1989 Stamp ink for polypropylene plastic sacks

FI-SFS

SFS 3227-1976 plastic. Polyethylene. Grading
SFS 3460-1978 plastic pipe. PVC conveyor pipe. Pressure value measurement
SFS 3225-1976 plastic. Polyethylene and polypropylene. Determination of viscosity of diluents
SFS 4388-1979 plastic. Polystyrene. Determination of styrene content depicted by vaporized chromium

TR-TSE

TS 418-1966 PE PLASTIC P?PES
TS 1800-1975 POLYETHYLENE THERMOPLASTIC MATERIALS — DESIGNATION —
TS 3435-1979 PLASTICS - POLYSTYRENE MOULDING AND EXTRUSION MATERIALS - DESIGNATION
TS 1117-1972 PLASTICS DETERMINATION OF VINYL AOETATE ?N VINYL CHLORIDE - VINYL ACETATE COPOLYMERS
TS 1801-1975 PLAST1CS DESIGNATION OF POLYVINYL CHLORIDE RESINS
TS 3078-1978 PVC Plastic For Construction And Expansion Joints In Concrete Work (PCV Plastic Waterstop)
TS 3423-1979 PLASTICS - DESIGNATION OF IMPACT RESISTANT POLYSTYRENES

U.S. Military Regulations and Norms

ARMY MIL-P-21922 B-1973 PLASTIC RODS AND TUBES, POLYETHYLENE
ARMY MIL-P-21922 B (1)-1974 PLASTIC RODS AND TUBES, POLYETHYLENE
ARMY MIL-P-21922 B VALID NOTICE 1-1988 PLASTIC RODS AND TUBES, POLYETHYLENE
ARMY L-P-1040 B NOTICE 1-2013 PLASTIC SHEETS AND STRIPS (POLYVINYL FLUORIDE)
ARMY MIL-P-51406 A NOTICE 1-1996 PLASTIC SHEETS, VINYL CHLORIDE POLYMER AND COPOLYMER, FLEXIBLE
ARMY MIL-P-51406 A-1984 PLASTIC SHEETS, VINYL CHLORIDE POLYMER AND COPOLYMER, FLEXIBLE
ARMY MIL-P-51406 A (1)-1987 PLASTIC SHEETS, VINYL CHLORIDE POLYMER AND COPOLYMER, FLEXIBLE
ARMY MIL-O-60540 NOTICE 1-1997 OBTURATING BANDS, PLASTIC, RIGID, HIGH IMPACT, POLYVINYL CHLORIDE (MOLDED)
ARMY MIL-P-44305-1988 PLASTIC FILM, FLEXIBLE, POLYAMIDE AND POLYETHYLENE
ARMY L-P-1040 B-1977 PLASTIC SHEETS AND STRIPS (POLYVINYL FLUORIDE)

(U.S.) Ford Automotive Standards

FORD ESB-M4D145-A-1995 POLYETHYLENE (PE), LINEAR, BLOW MOLDING COMPOUND
FORD ESB-M4D317-A-1985 POLYVINYL CHLORIDE, INJECTION MOLDING COMPOUND, ELECTRICAL GRADE

GM Europe

GME STD 518770-2001 Plastic 8770 PP/PE Plast 8770 PP/PE English/Swedish
GME STD 518777-1996 Cellular plastic 8777 EVA Cellplast 8777 EVA English/Swedish
GME STD 518755-1997 Plastic 8755 PVC/ABS Plast 8755 PVC/ABS English/Swedish
GME STD 518925-2001 Plastic 8925 PP/PE Plast 8925 PP/PE English/Swedish
GME STD 518291-2001 Cellular plastic 8291 Self adhesive Polyethylene cellular plastic Cellplast 8291 Sj鋖vh鋐tande polyetencellplast English/Swedish

PL-PKN

PN BN 6350-01-1965 Plastic film made of thermoplasticized polyvinyl chloride. Water resistance mark
PN BN 6365-01-1965 Polyethylene products. plastic film
PN C89416-1990 Plastics Determination of resistance of polystyrene and styrene copolymers to attack by trichlorofluoromethane
PN BN 6354-02-1965 PVC products. plastic film
PN-EN 15344-2021-10 E Plastics--Recycled plastics--Characterisation of Polyethylene (PE) recyclates
PN BN 6353-01-1964 Reinforced plastic film made of thermoplasticized polyvinyl chloride
PN-EN ISO 6259-2-2021-03 E Thermoplastics pipes -- Determination of tensile properties -- Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chlo

American Society for Testing and Materials (ASTM)

ASTM D3291-97(2003) Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression
ASTM D3291-11(2016)e1 Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression
ASTM D3261-03 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
ASTM D3261-16 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
ASTM D3261-12e1 Standard Specification for Butt Heat Fusion Polyethylene 40;PE41; Plastic Fittings for Polyethylene 40;PE41; Plastic Pipe and Tubing
ASTM D2951-00 Standard Test Method for Resistance of Types III and IV Polyethylene Plastics to Thermal Stress-Cracking
ASTM D3261-12 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
ASTM D3261-97 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
ASTM D3261-10 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
ASTM D2737-12 Standard Specification for Polyethylene (PE) Plastic Tubing
ASTM D2737-12e1 Standard Specification for Polyethylene (PE) Plastic Tubing
ASTM D3291-11 Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression
ASTM F1281-11 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
ASTM D1693-21 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
ASTM D3261-10a Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
ASTM D1693-07 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
ASTM D1693-05 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
ASTM D1693-01 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
ASTM D1693-00 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
ASTM D4549-00 Standard Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
ASTM D1693-12 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
ASTM D1693-08 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
ASTM D1693-13 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
ASTM D2737-12a Standard Specification for Polyethylene (PE) Plastic Tubing
ASTM F639-98a Standard Specification for Polyethylene Plastics for Medical Applications
ASTM D4101-06 Standard Specification for Polypropylene Injection and Extrusion Materials
ASTM D4101-06b Standard Specification for Polypropylene Injection and Extrusion Materials
ASTM D1693-94 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
ASTM D1693-15 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
ASTM D1693-97a Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
ASTM D4101-06a Standard Specification for Polypropylene Injection and Extrusion Materials
ASTM D1693-07a Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
ASTM D1693-15e1 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
ASTM D2561-17 Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers

IN-BIS

IS 2530-1963 Test methods for polyethylene molding materials and polyethylene compounds
IS 8747-1977 Test method for environmental stress cracking resistance of blow molded polyethylene containers

GOSTR

GOST 19034-1982 Tubes of polyvinylchloride plastic. Specifications

ZA-SANS

SANS 6025:1984 Vinyl chloride monomer content of polyvinyl chloride plastics for medical use

Association of German Mechanical Engineers

DVS 2204-3-1981 Glueing of thermoplastics; polystyrene and allied plastics

UY-UNIT

UNIT 98-1953 Conductor with thermoplastic (the plastic component is mainly polyvinyl chloride or ethylene acetate polymer)

ES-AENOR

UNE 53-188 Pt.1-1991 Plastics. Polythylene(PE) and ethylene copolymer thermoplastics. Part 1: Designation

SAE - SAE International

SAE AMS3532C-1995 ETHYLENE TETRAFLUOROETHYLENE (ETFE) MOLDED SHEET Stress Relieved
SAE AMS3630E-1992 Plastic Extrusions@ Flexible Polyvinyl Chloride
SAE AMS-P-21922A-2016 Plastic Rods and Tubes@ Polyethylene
SAE AMS3630D-1984 Plastic Extrusions@ Flexible Polyvinyl Chloride
SAE AMS3630F-1996 PLASTIC EXTRUSIONS@ FLEXIBLE Polyvinyl Chloride

AT-ON

OENORM EN 15344-2021 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates

BE-NBN

NBN 704-1967 Impact resistance of polyvinyl chloride pipes without plastic film protection

CH-SNV

SN EN 15344-2021 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates
SN EN ISO 6259-2:2021 Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chlori

IT-UNI

UNI EN 15344-2021 Plastics - Recycled plastics - Characterization of Polyethylene (PE) recyclates
UNI EN ISO 6259-2:2020 Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chlori

VN-TCVN

TCVN 7434-2-2004 Thermoplastics pipes.Determination of tensile properties.Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI)

United States Navy

NAVY MIL-R-23444 A NOTICE 1-1992 RESIN, POLYVINYL CHLORIDE, PLASTISOL GRADE
NAVY MIL-R-23444 A-1968 RESIN, POLYVINYL CHLORIDE, PLASTISOL GRADE

TH-TISI

TIS 655.1-2010 Plastic utensils for food.part 1: polyethylene, polpropylene, polystyrene, poly(ethylene terephthalate), poly (vinyl alcohol) and poly(methyl pentene)

ET-QSAE

ES 410-2000 Determination of thickness of plastic polyethylene films

International Electrotechnical Commission (IEC)

IEC 60811-406:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds

Standard Association of Australia （SAA）

AS/NZS 4130:2018 Polyethylene (PE) pipes for pressure applications
AS/NZS 4130:2009 Polyethylene (PE) pipe for pressure applications

CEN - European Committee for Standardization

PREN 12106-2014 Plastics piping systems - Polyethylene (PE) and crosslinked polyethylene (PE-X) pipes - Test method for the resistance to internal pressure after application of squeeze-of

International Federation of Trucks and Engines

NAVISTAR TMS 7019-1979 VOID - Polyvinyl Chloride Plastisol Specification

BELST

STB 1267-2001 Sealants of polyvinylchloride plastic. Specifications

Others: Stress in polyethylene plastic,Standard Specification for Polyethylene Plastic Molding and Extrusion Materials,Standard Specification for Materials for Polyethylene Plastic Pipe and Fittings